Installation Guide SISTP1010-380-LRT-B Unmanaged Gigabit Power over Ethernet (PoE) Industrial Ethernet Switch • •
8x 10/100/1000Base-T copper PoE ports Redundant power
Contents Introduction.................................................................................................................................................... 1 Features ........................................................................................................................................................ 2 Applications ................................................................................................................................................... 2 Installation ..................................................................................................................................................... 3 Connecting Power ......................................................................................................................................... 4 DIP Switch Functions ................................................................................................................................ 4 Front Panel .................................................................................................................................................... 5 Power LEDs .............................................................................................................................................. 5 Link/Active LED (Green) RJ-45 Ports ....................................................................................................... 5 PoE LED (Green) RJ-45 Ports.................................................................................................................. 6 RJ-45 PoE Pin Definitions ............................................................................................................................. 6 Accessories included .................................................................................................................................... 7 TN 25079 - 24 VDC Industrial Power Supply ........................................................................................... 8 Technical Specifications .............................................................................................................................. 10 Contact Us................................................................................................................................................... 11 Compliance Information .............................................................................................................................. 11 Record of Revisions .................................................................................................................................... 12
Introduction Transition Networks‘ SISTP1010-380-LRT-B is an unmanaged PoE Industrial Ethernet Switch with power source equipment (PSE) function. It supports PoE, a system to transmit electrical power along with data to remote devices over standard twisted-pair cable in an Ethernet network. The SISTP1010-380-LRT-B has eight 10/100/1000Base-T(X) PSE ports. A PSE is a device (switch or hub) that will provide power in a PoE setup. The wide operating temperature range from -40 to 70°C can satisfy most operating environments. Therefore, the switch is one of the most reliable choices for PoE applications. The SISTP1010-380-LRT-B can be used to connect several PoE PD Ethernet devices, such as IP Cameras or other devices. In addition, there are two independent power inputs on the terminal block for power redundancy. When the primary DC power input fails, the backup power source will take over immediately, ensuring continuous operation.
33503 Rev. B
http://www.transition.com/
Page 1 of 12
Transition Networks
SISTP1010-380-LRT-B Install Guide
Features • • • • • • • • • •
Provides eight 10/100/1000Base-T(X) PoE, PSE ports Provides up to 30 watts per port on 4 ports, or 15 watts per port on 8 ports Rigid IP-30 housing design DIN-Rail and wall mounting enabled Supports 9K jumbo frames Supports a wide temperature range: -40 – 70°C degrees for harsh environment Supports 24 - 36VDC redundant power input Supports Auto-negotiation, Auto MDI/MDI-X Support flow control and store-and-forward transmission Dry contact relay alarm output
Applications Transition’s SISTP1010-380-LRT-B Industrial PoE switch is a High Power Sourcing Equipment (PSE) device providing Power-over-Ethernet over standard twisted pair cables in an Ethernet network. Operating from a wide-range 24-36VDC power input, the device is ideal for providing communications services onboard vehicles. Its extended operating temperature range of -40 to +70° C allows the switch to be located outside of environmentally conditioned passenger areas.
Figure 1. PoE from Vehicle Power to Enable Onboard Video Security and Wireless Services
33503 Rev. B
http://www.transition.com/
Page 2 of 12
Transition Networks
SISTP1010-380-LRT-B Install Guide
Installation
33503 Rev. B
www.transition.com
Page 3 of 12
Transition Networks
SISTP1010-380-LRT-B Install Guide
Connecting Power The Industrial Power Supply (TN 25079 24 VDC Industrial Power Supply) is an optional accessory (sold separately).
DIP Switch Functions DIP 1
DIP 2
Description
OFF
OFF
Power failure relay alarm disabled.
ON
OFF
PWR-1 failure, relay alarm enable.
OFF
ON
PWR-2 failure, relay alarm enable.
33503 Rev. B
http://www.transition.com/
Page 4 of 12
Transition Networks
SISTP1010-380-LRT-B Install Guide
Front Panel Note: The RJ-45 Port LEDs on the device are not marked.
Power LEDs LED
Color
Description
P1
Green
ON Active OFF Inactive
P2
Green
ON Active OFF Inactive
Fault
Red
ON Power input 1 or 2 has failed OFF Power input 1 and 2 are both functional, or no power inputs
Link/Active LED (Green) RJ-45 Ports State
Meaning
OFF
No link
ON
Port Link, but no activity
Flashing
Link/Activity
33503 Rev. B
www.transition.com
Page 5 of 12
Transition Networks
SISTP1010-380-LRT-B Install Guide
PoE LED (Green) RJ-45 Ports State
Meaning
OFF
No PoE provided
Short blink
PoE signature detecting/sensing
Long blink
PoE applied momentarily (occurs when failing/flapping)
ON
PoE is provided
RJ-45 PoE Pin Definitions 10/100Base-T(X) PSE RJ-45 Port RJ-45 Pin Definition Pin No.
Description
1
TD+ with PoE Power input +
2
TD- with PoE Power input +
3
RD+ with PoE Power input -
6
RD- with PoE Power input -
1000Base-T(X) PSE RJ-45 Port RJ-45 Pin Definition Pin No.
Description
1
B1_DA+ with PoE Power input +
2
B1_DA- with PoE Power input +
3
B1_DA+ with PoE Power input -
4
B1_DC+
5
B1_DC-
6
B1_DA- with PoE Power input -
7
B1_DD+
8
B1_DDRJ
33503 Rev. B
http://www.transition.com/
Page 6 of 12
Transition Networks
SISTP1010-380-LRT-B Install Guide
Accessories included
33503 Rev. B
www.transition.com
Page 7 of 12
Transition Networks
SISTP1010-380-LRT-B Install Guide
TN 25079 - 24 VDC Industrial Power Supply (Optional - sold separately)
Optional Power Supply Features • • • • • • • • • • •
Variable AC input range Protected against: Short Circuit, Overload, Over Voltage, Overheating Convection air cooling DIN rail mountable UL 508 approved Full load burn in test Lifetime warranty RoHS compliant MTBF 136.8Khrs Dimensions (mm) 65.5W, 125.2H, 100D Weight .79Kg
Optional Power Supply Specs Output Voltage 24VDC Current Rating 5.0A Power Rating 120 Watts Ripple & Noise Max 80mVp-p Voltage Range 24~28VDC Voltage Tolerance ±1.0% Line Regulation ±0.5% Load Regulation ±1.0% Setup, Rise Time 500ms, 70ms Hold Up Time 36ms Voltage Range Switch Selectable, 88~132VAC, 176~264VAC, 248~370VDC Frequency Range 47~63Hz Efficiency 85% AC Current (Typical) 2.6A@115VAC, 1.6A@230VAC Inrush Current (Cold) 20A@115VAC, 40A@230VAC Leakage Current
