Industrial Weighing Indicators and Transmitters

BAYKON; having the international certifications and accreditations of weighing industry, with is qualified and experienced staff and its professional solutions supported by a large product portfolio; is weighing industry choosen provider for weighing electronics, load cells, industrial weighing solutions. Since 1987, industrial weighing instruments manufacturer BAYKON has built upon its reputation for product quality, technical innovation, fast and effective customer support. We deliver weighing products that integrate productivity, complience, quality and safety into your weighing systems and solutions.

CONTENTS Industrial weighing and process weighing applications • Robust housing for industrial environments

Powerfull calibration options • Zero & Span adjust • Tank calibration without emptying • Electronic calibration (eCal)

Weighing Indicators

BX1 Weighing Indicator BX1(D) Digital Weighing Indicator BX2 Weighing Indicator BX3 Filling Controller BX5 Truck Scale Indicator BX5(D) Truck Scale Indicator BX10 Weighing Terminal BX11 Weighing Indicator BX13 Filling Controller BX14 Weighing Controller BX18 Weighing Indicator BX21 Weighing Indicator BX21S Weighing Indicator BX27 Weighing Indicator

Weighing Terminals

BX6W/BX6W(D) Scale Terminals BX61 Weighing Terminal BX62 Weighing Terminal BX66 Scale Terminal Analog and Digital Transmitters • DIN rail type • Calibration including eCal through xFACE PC software

Transmitters

TX1 & TX1W Weighing Transmitters TX2 Digital Load Cell Transmitters TX4 Digital Load Cell Transmitters TX11 Weighing Transmitter TX12 Weighing Transmitter MX08 Multichannel System

Accessories Flexible connectivity • • • • • • • •

Ethernet TCP/IP Modbus RTU &TCP Profibus Profinet CANopen RS-232C, RS-485 serial Analog (4-20mA, 0-10V) Binary Output

RX.. Series Remote Displays Junction Boxes BY-3S / BY-3SL Printers BRF1 Serial RF Modem

2 ........................................ 4 ........................................ 6 ........................................ 8 ........................................10 ........................................12 ........................................14 ........................................16 ........................................18 ........................................20 ........................................22 ........................................24 ........................................26 ........................................28 ........................................

30 ........................................32 .......................................34 ........................................36 .......................................

38 ........................................40 ........................................42 ........................................44 ........................................46 ........................................48 ........................................

50 51 ........................................52 ........................................53 ........................................ ........................................

BX1 Weighing Indicator For scales and weighing processes

Features • OIML10000e and 2 x 6000e approved • 20 mm LED display • x10 key for high resolution • 1.000.000 keypad test • Standard RS-232C port • Battery option

3 Type Industrial Boxes Desk and wall types; • IP30, aluminum cast • IP65, full stainless steel Panel type; • IP65 stainless steel front panel, aluminum body

External Programming • Easy programming and calibration via RS-232C port by BAYKON “INDFACE” software, • Header and footer for label can be loaded from PC.

BX1 Weighing Indicator is very accurate, versatile, general purpose instrument, available in different housings, meeting the industrial demands for various environmental conditions.

eCal - Electronic Calibration • Calibration without test weights • Big advantage to calibrate a high capacity tank, silo or any weighing system calibrations.

The instrument is approved by Weights & Measures Authorities for use in Accuracy Class III applications with 10000 and 2x6000 intervals according to OIML R76. Large 6 digit LED weight display (red 20 mm / panel type 14 mm) with weighing status information.

System Integration • 2. serial port RS-232C • 3. serial port RS-485, RS-232C or 20mA CL ASCII • Ethernet TCP / IP • Modbus RTU / TCP • Profinet • CANopen • Profibus • Opto-isolated parallel 3I / 3O • Analogue output (0-10 V / 4-20 mA) • Binary output

With a wide variety of interface options, various calibration features including electronic calibration and up to 60000d display resolution, BX1 is a perfect fit terminal for weighing process control systems.

2

BX1 Specifications Accuracy

Accuracy Class EU Type approval Linearity & temperature coefficient

III 10.000 intervals (single range) or 2 X 6000 intervals (multi range) % 0.0015 FS ; ≥ 2 ppm/°C

Display Status annunciators Keyboard Key lock

6 digits, 7 segments, LED red, 20 mm high (Panel type 14 mm high) Gross, net, motion, centre of zero, weighing ranges, information, power, unit 8-key membrane, with tactile feedback Basic weighing related key can be locked against unauthorized access

Type Conversion rate Minimum input voltage Analogue input range Resolution

24 bit Delta-Sigma ratiometric ADC Maximum 100 measurements per second 0.4 V per interval legal for trade; 0.1 V per interval non approved 0 mV – 18 mV Internal up to 8.000.000; display up to 60.000 counts

Calibration Digital filter Weighing functions Other functions Set points Tilting Serial interface Alibi memory

Standart: By etalon weights via keys or serial eCal: Electronic calibration without etalon weights 10 step adjustable digital adaptive filter Taring, zeroing, auto zero tracking, motion detection, auto-zero at power-up Label number, total, gross, tare indication 3 set points, programmable (needs I/O board is an option) Inhibits weighing when scale is tilted (needs I/O board option) RS-232C, 1200...57600 baud, programmable Optionally available; 74880 records or 149760 records

Excitation Number of load cells Connection

5 VDC, max. 100 mA Up to 6 load cells 350 or 18 load cells 1100 in parallel 4 or 6 wire technique. Cable length 274 m/mm² for 6 wire connection

Operation temperature Humidity Enclosure

-10 °C to +40 °C legal for trade; 85% RH max, non-condensing. Aluminum cast desk type (IP30), panel type (front panel IP65) or stainless steel housing (IP65)

Display and Keyboard

A/D Converter

Scale Calibration and Functions

Loadcell Connection

Environment and Enclosure

Power Supply

Panel type

Desk type

Stainless steel

230 VAC, 24 VDC, 50/60 Hz, max. 12 VA 12 VDC, max. 300 mA Rechargeable battery

Options

2nd Serial interface (RS-232C) 2nd Serial interface (RS-232C) and 3rd Serial interface (RS-232C/RS-485/Modbus RTU) Profibus DP-V0&V1 / Profinet / CANopen Ethernet TCP/IP and Modbus TCP Analogue output: 0 -10 V / 4 - 20 mA Binary output of displayed weight (17 - bit code) 3 Setpoints Opto-isolated digital inputs (24 V) and Opto-isolated digital outputs (open emitter)

(1)

(1)

(1)

(1)

(1) (1) (1) (1) (1)

(1) (1) (1) (1) (1)

(1)

(1)

Mounting Parts Wall mount kit Stand mount kit

(1) Not available for battery equipped instruments

standard version

3

optionally available

not available

BX1(D) Digital Weighing Indicator Designed for digital load cells

Features • Digital load cell interfacing • OIML 10000e and 2 x 6000e approved • 20mm LED display • Standard RS-232C port

BX1(D) Digital Weighing Indicator is the digital load cell version in the BX-Indicator family, specificly designed to be connected to Flintec RC3D load cells.

External Programming • Easy programming and calibration via RS-232C port by BAYKON “INDFACE” software. • Header and footer for label can be uploaded from PC.

The instrument is approved by Weights & Measures Authorities for use in Accuracy Class III applications with 10000 and 2x6000 intervals according to OIML R76. Large 6 digit LED weight display (red 20 mm) with status information.

Sytem Integration • 2. serial port RS-232C • 3. serial port RS-485 RS-232C or 20mACL • Modbus RTU / TCP • Opto-isolated parallel 3I / 3O

With a wide variety of interface options and various calibration features, BX1(D) is a perfect fit terminal for digital weighing systems, i. e. weighbridges with indicator and PC.

4

BX1(D) Specifications Accuracy

Accuracy Class EU Type approval

Display and Keyboard Display Status annunciators Keyboard On / of switch Key lock

Digital Load Cell Interface

III 10.000 intervals (single range) or 2 X 6000 intervals (multi range) 6 digits, 7 segments, LED red, 20 mm high (Panel type 14 mm high) Gross, net, motion, centre of zero, weighing ranges, information, power, unit 8-key membrane, with tactile feedback Yes Basic weighing related key can be locked against unauthorized access

Communication & protocol Excitation Number of digital load cells Connection

RS-485, Compatible with RC3D load cell 12 VDC, max.600 mA Up to 10 digital load cells (internal power) or 16 digital load cells (external power) in parallel 4 wire technique. 2 wires for digital interface and 2 wires for power supply

Calibration Corner adjustment Digital filter Weighing functions Other functions Set points Tilting Serial interface Alibi memory

Standard: Calibration is performed by etalon weights. eCal: Electronic calibration without etalon weights Automatic corner adjustment 5 step adjustable digital adaptive filter Tare, zeroing, auto zero tracking, motion detection, power on zero Label number, total, gross, tare indication 3 set points, programmable (I/O board is an option) Inhibits weighing when scale is tilted (needs I/O board option) RS-232C, 1200...57600 baud, programmable Optionally available; 74880 records or 149760 records

Serial interface

RS-232C, 1200...57600 baud, programmable

Operation temperature Humidity

-10 °C to +40 °C legal for trade; 85% RH max, non-condensing.

Scale Calibration and Functions

Communication

Environment and Enclosure

Power Supply

Stainless steel

230 VAC, 24 VDC, 50/60 Hz, max. 12 VA

Options

2nd Serial interface (RS-232C) 2nd Serial interface (RS-232C) and 3rd Serial interface (RS-232C/RS-485/Modbus RTU) Binary output of displayed weight (17 - bit code) 3 Setpoints Opto-isolated digital inputs (24 V) and Opto-isolated digital outputs (open emitter)

Mounting Parts Wall mount kit Stand mount kit

standard version

(1) Not available for battery equipped instruments

5

optionally available

not available

BX2 Weighing Indicator Professional solutions in weighing

Features • 2 user named alphanumeric ID codes and memory • Numeric tare and memory • Standard and customized labels with date, time and consecutive number • RS-232C serial port • Battery option Application Modes • Weighing and labeling • Dynamic weighing • Automatic filling • Peak & hold • Classifying

3 Type Industrial Boxes Desk and wall types; • IP30, aluminum cast • IP65, full stainless steel Panel type; • IP65 stainless steel front panel, aluminum body

BX2 Weighing Indicator is very accurate, versatile, general purpose instrument, available in different housings, meeting the industry demands for various environmental conditions.

External Programming • Easy programming and calibrating via RS-232C port by BAYKON “INDFACE” software. • Ticket format can be loaded by PC via serial port.

The instrument is approved by Weights & Measures Authorities for use in Accuracy Class III applications with 10000 and 2x6000 intervals according to OIML R76. 2 alphanumeric ID codes, standard and user configurable labels with header & footer, date, time, consecutive number and barcode is important features of BX2 indicator.

System Integration • 2. serial port RS-232C • 3. serial port RS-232C / RS-485 • Ethernet TCP / IP • Modbus RTU / TCP • Opto-isolated parallel 3I / 3O • Analogue ( 0-10 V / 4-20 mA) • Binary output

With a variety of interface options and the selectable modes for common weighing applications in the industry, the BX2 is the perfect fit to weighing systems and process control systems.

6

Application Modes 1. Weighing and Labeling You can print labels including header & footer, date, time, ticket number, alphanumeric data for two separate codes which can be defined by user freely, gross, tare and net weighing. BX2 terminal can print two different type of standard tickets including totalizing and customized ticket with barcode which are designed by user. 2. Dynamic Weighing It catches the weight of animals and moving objects on conveyors and transmits via serial port. It also applies for animal weighing. 3. Automatic Filling Automatic 2 speed filling either in gross mode or in net mode which the tare is taken automatically. 4. Peak Holding At tension tests detects the peak value and produces test print. 5. Classifying (Light-Normal-Heavy) Classifies the products with controlling nominal weight and tolerance values which entered before.

BX2 Specificiations Accuracy Class & EU Type approved Display

A/D converter Minimum input per vsi Analogue input range Resolution Calibration Digital filter Functions

Memory Serial interface Excitation Number of load cells Connection Operation temperature & humidity Alibi memory

Power Supply

Class III, 10 000 intervals (single range) or 2 X 6000 intervals (multi range) 6 digits, 7 segments, LED red, 20 mm high (Panel type 14 mm high) 24 bit Delta-Sigma ratiometric with integral analog and digital filters

0.4 V per interval legal for trade; 0.1 V per interval non approved 0 mV – 18 mV

Internal up to 8.000.000; display up to 60.000 counts Calibration is performed by application weights or by INDFACE software via serial port 10 step adjustable digital adaptive filter 2 x ID code, date & time, label number, total indication. ID code / alphanumeric ID tables can be downloaded via host with INDFACE software. EPL format barcode label printing. Up to 99 ID (alphanumeric), up to 99 preset tare and 9 setpoint groups (3 set points per group) can be stored. RS-232C, 1200 – 57600 baud rate, programmable 5 VDC, max. 100 mA Up to 6 load cells 350 or 18 load cells 1100 in parallel 4 or 6 wire technique. Cable length 274 m/mm² for 6 wire connection -10 °C to +40 °C legal for trade; 85% RH max, non-condensing Optionally available; 74 880 records or 149 760 records

Panel type

Desk type

Stainless steel

230 VAC, 24 VDC, 50/60 Hz, max. 12 VA 12 VDC, max. 300 mA Rechargeable battery

Option For Additional Inputs / Outputs

2nd Serial interface (RS-232C) 2nd Serial interface (RS-232C) and 3rd Serial interface (RS-232C/RS-485/Modbus RTU) Ethernet TCP / IP and Modbus TCP Analogue output: 0-10 V / 4 - 20 mA Binary output of displayed weight (17 - bit code) Opto-isolated digital inputs (24 V) and Opto-isolated digital outputs (open emitter)

(1)

(1)

(1)

(1)

(1) (1) (1)

(1) (1)

(1)

(1)

Additional Mechanical Hardware Wall mount kit Stand mount kit

standard version

(1) Not available for battery equipped instruments

7

optionally available

not available

BX3 Filling Controller Fits for any type of filling processes

Standard Features • MID 006 approved for gravimetric filling device • Aluminum housing with stainless steel front and back panel • 60000d readability • Opto-isolated parallel 4 inputs / 8 outputs • Total & statistical report • 16 receipt memories • Automatic preact correction • Filling process can be followed • Date, time, and filling or weighing values are exported automatically after each filling

Filling Modes • 9 standard filling modes can be selected in programming parameters: • Liquid filling for open containers, filling under bung hole or at bottom filling • “Weigh in and emptying” mode for automatic packing machines, bag fillers • Tank/Silo filling and discharging • “Weigh in-Weigh out” for sticky /viscous materials • Discontinuous totalizers • Filling in the bag as gross or net • Bag filling from hopper scale • Customized filling modes for OEMs' requests.

BX3 is a professional filling terminal designed for any type of filling processes of liquid, bulk and granule material with all type of packages. With its 8.000.000 internal resolution, high speed with up to 400 measurements per second, selectable standard digital and statistical filters, BX3 provides fast and accurate filling results in even environments with vibrations. It has 9 standard filling modes for different type of materials and packages. Customized filling process can be defined according to user processes.

System Integration • 2. serial port RS-232C, RS-485 or 20mA CL ASCII • Ethernet TCP / IP • Modbus RTU / TCP • Profibus • Profinet • CANopen • Additional 4 / 8 paralel I / O

3 speed fillings with preact adjustment, tare control, zero range control, tolerance control, jogging, valves position controls are standard features. Filling data including date, time, consecutive number, gross, tare and net filling values are exported automatically after each filling to printer or host. Total and statistical reports are also available. 8

BX3 Application Modes Selectable standard modes: • Filling open container (for liquid & bulk filling) • Filling under bung hole • Filling at bottom (for foaming liquids) • Weigh in and emptying (Automatic packing machines, bagging) • Weigh into or Weigh out of a tank, silo • Weigh in - Weigh out (for sticky and viscous materials) • Discontinuous totalizer • Filling in the bag as gross or net • Bag filling from hopper scale Customized filling processes Configurable according to OEMs' requests

Specifications

Accuracy

Accuracy Class EU Type approved Linearity & temperature coefficient

III 10.000 increments (Single range) % 0.0015 FS ; ≤ 2 ppm/°C

Display Status annunciators Keyboard

6 digits, 7 segments, LED red, 20 mm high (Panel type 14 mm high) Gross, net, motion, zero, information, power, unit and 6 LED’s for application related status 18-key membrane, with tactile feedback

Type Conversion rate Maximum 200 measurements per second Analogue input range Resolution

24 bit Delta-Sigma ratiometric with integral analog and digital filters Up to 400 measurements per second 0.4 V per interval legal for trade; 0.1 V per interval non approved 0 mV – 18 mV Internal up to 8 000 000; display up to 60 000 counts

Calibration Digital filter

Calibration is performed by etalon weights 10 step adjustable digital adaptive filter

Excitation Number of load cells Connection

5 VDC, max. 100 mA Up to 6 load cells (350 ) or 18 load cells (1100 ) in parallel 4 or 6 wire technique. Cable length 274 m/mm² for 6 wire connection

Display and Keyboard

A/D Converter

Scale Calibration and Functions Load Cells

Environment And Enclosure

Operation temperature & humidity Enclosure

Power Supply

-10 °C to +40 °C legal for trade; 85% RH max, non-condensing Panel type ( front panel IP65 ) or stainless steel housing (IP65)

Panel type

Stainless steel

230 VAC, 24 VDC, 50/60 Hz, max. 12 VA 12 VDC, max. 12 VA

Option For Additional Interface

2nd Serial interface (RS-232C, RS485, Modbus RTU) Profibus DP-V0 & V1 / Profinet / CANOpen Ethernet TCP / IP and Modbus TCP Opto-isolated digital inputs (24 V) and Opto-isolated digital outputs (open emitter)

Additional Mechanical Hardware Wall mount kit

standard version

9

optionally available

not available

BX5 Truck Scale Indicator Practical and fast truck weighing

Standard Features • OIML 10000e / 2x6000e approved, up to 1/60000 readability • 19.000 weighing records memory, up to 99 1st weight memory • Up to 99 vehicle tare memory • Weighing modes: Standard 1st and 2nd weighing, Weighing with preset vehicle tare, transit weighing. • Powerful reporting • Traffic lights control output • 20 mm LED indicator • Active digital vibration filter • 2nd serial port as RS-232C • 3rd serial port as RS-232C/RS485/20 mA CL ASCII • Ethernet TCP/IP connection

Model BX5 is a multi functional truck scale indicator can be used without a PC. However, if requested, it can be used with BAYKON Truck Scale Software. Up to 19.000 weighing records can be stored in BX5 memory. Up to 99 vehicle tare weight and 99 first weight records can be saved. It has 3 weighing modes: Standard weighing which 1st & 2nd weighings are executed, Weighing with preset vehicle tare which can be entered via keys or recalled from vehicle tare memory and Transit weighing which is only single weighing. 5 different reports are given such as daily, between two dates, between two ticket numbers, etc. BX5 can be connected directly to ticket printer, remote display and traffic lights.

10

BX5 Features Weighing modes: BX5 has 3 weighing modes: 1) Standard weighing 1st & 2nd weighings are executed in this mode. 1st weighing record is stored in BX 5 memory and 1st weighing code is produced. 1st weighing code is produced automatically as 2 characters by BX 5 or if requested, it is given as 6 numeric characters by the operator. 1st weighing memory capacity is 99 codes and multiple codes cannot be created. During 2nd weighing, 1st weight comes from memory automatically by entering related code, 2 nd weighing is executed and weight ticket is printed out. If requested, BX5 is programmed to print 1st weight ticket.

Tickets

2) Weighing with preset vehicle tare In this weighing mode, vehicle tare can be entered via key manually or recalled from vehicle tare memory by code. On the weight ticket, PT sign is printed behind 1st weight value informing that tare is entered manually.

Standard weighing

Weighing with preset vehicle tare

Reports

3) Transit weighing This mode is a single weighing operation. Ticket is printed after weighing.

Daily reports

Easy and fast weighing Operator is guided for easy and fast weighing. If need the last ticket is reprinted by simple pressing a key. High weighing record capacity Up to 19.000 weighing records can be saved and displayed on the display of BX5 indicator. Vehicle tare memory Up to 99 vehicle tares can be saved and recalled from BX5 memory.

Report between any 2 dates

Powerful reporting BX5 has very flexible and practical report menu. Records for daily, between any 2 dates, between any 2 ticket numbers can be taken. On the reports, it is indicated if the vehicle is incoming or outgoing, if tare is entered manually and if the weighing is transit mode. Additionally, 1st weighed vehicle list and weighing totals for the vehicle in the vehicle memory can be reported.

Report between any 2 ticket numbers

Options Remote display, traffic lights, additional up to 3 serial ports and Ethernet TCP/IP output are available as option.

Technical Specifications

EU approval Housing

Display Record capacity Number of load cell Serial port Power Operation temp. Options 2nd serial port 3rd serial port Ethernet TCP/IP

10000e or 2x6000e approved • IP30 aluminum cast, desk/wall type • IP65 stainless steel desk/wall type • Panel type, IP65 stainless steel front panel and back panel, aluminum body 6 digit, 20 mm red LED 19 000 weighing / 99 1st weight & 99 vec. tare

Weighing totals of vehicles in the memory

6 x 350 ohm / 20 x 1200 ohm ( min 58 ohm)

Report of 1st weighed trucks

Standard RS-232C for printer/PC connection 230 V / 50 Hz AC, 12 VDC or 24 VDC -10 °C / +40 °C, %85 relative humidity RS-232C RS-232C, RS-485, 20mA CL ASCII Data transfer via Ethernet

11

Transit weighing

BX5(D) Truck Scale Indicator Practical and fast truck weighing

Standard Features • OIML 10000e / 2x6000e approved, up to 1/60000 readability • 19.000 weighing records memory, up to 99 1st weighing memory • Up to 99 vehicle tare memory • Weighing modes: Standard 1st and 2nd weighing, Weighing with preset vehicle tare, transit weighing. • Powerful reporting • Traffic lights control output • 20 mm LED indicator • Active digital vibration filter • 2nd serial port as RS-232C • 3rd serial port as RS-232C/RS-485/ 20 mA CL ASCII

Model BX5(D) is a digital load cell based truck scale indicator can be used without a PC. However, if requested, it can be used with BAYKON Truck Scale Software. Up to 19.000 weighing records can be stored in BX5(D) memory. Up to 99 vehicle tare weight and 99 first weight records can be saved. It has 3 weighing modes: Standard weighing which 1st & 2nd weighings are executed, Weighing with preset vehicle tare which can be entered via keys or recalled from vehicle tare memory and Transit weighing which is only single weighing. 5 different reports are given such as daily, between two dates, between two ticket numbers, etc. BX5(D) can be connected directly to ticket printer, remote display and traffic lights.

12

BX5(D) Features Tickets

Weighing modes: BX5(D) has 3 weighing modes: 1) Standard weighing 1st & 2 nd weighings are executed in this mode. 1st weighing record is stored in BX5(D) memory and 1st weighing code is produced. 1st weighing code is produced automatically as 2 characters by BX5(D) or, if requested, it is given as 6 numeric characters by the operator. 1st weighing memory capacity is 99 codes and multiple codes cannot be created. During 2 nd weighing, 1st weight comes from memory automatically by entering related code, 2 nd weighing is executed and weight ticket is printed out. If requested, BX5(D) is programmed to print 1st weight ticket. 2) Weighing with preset vehicle tare In this weighing mode, vehicle tare can be entered via key manually or recalled from vehicle tare memory by code. On the weight ticket, PT sign is printed behind 1st weight value informing that tare is entered manually. 3) Transit weighing This mode is a single weighing operation. Ticket is printed after weighing.

NET A.S. Tel : +90 216 5932636 Fax : +90 216 5932639 Istanbul, Turkey

NET A.S. Tel : +90 216 5932636 Fax : +90 216 5932639 Istanbul, Turkey

NET A.S. Tel : +90 216 5932636 Fax : +90 216 5932638 Istanbul, Turkey

WEIGHING TICKET

WEIGHING TICKET

WEIGHING TICKET

Ticket no : 22 Date : 24. 05.2010 Time : 09:12

Ticket no : 3422 Date : 24. 05.2010 Time : 09:12

Ticket no : 13488 Date : 24. 05.2010 Time : 09:12

Vehicle ID : 123456 Customer : Commodity :

Vehicle ID : 12 Customer : -Commodity: 316 L/ 2.5mm

Vehicle ID: 123456

1.Weight 2.Weight

: 10980 kg : 54120 kg

1.Weight 2.Weight

: 9820 kg PT : 53980 kg

Thank you

Net

: 43140 kg

Net

: 44160 kg

www.baykon.com

Standard weighing

Reports

Weighing with preset vehicle tare

Daily reports

Easy and fast weighing Operator is guided for easy and fast weighing. If need be the last ticket is reprinted by simple pressing a key. High weighing record capacity Up to 19.000 weighing records can be saved and displayed on the display of BX5(D) indicator.

Report between any 2 dates

Vehicle tare memory Up to 99 vehicle tares can be saved and recalled from BX5(D) memory. Powerful reporting BX5(D) has very flexible and practical report menu. Records for daily, between any 2 dates, between any 2 ticket numbers can be taken. On the reports, it is indicated if the vehicle is incoming or outgoing, if tare is entered manually and if the weighing is transit mode. Additionally, 1 st weighed vehicle list and weighing totals for the vehicle in the vehicle memory can be reported.

Report between any 2 ticket numbers

Options Remote display, traffic lights, additional up to 3 serial ports are available as option.

Technical Specifications EU approval Housing Display Record capacity Load cells Serial port Power Operation temp. Options 2nd serial port 3rd serial port

Weighing totals of vehicles in the memory

10000e or 2x6000e approved • IP30 aluminum cast, desk/wall type • IP65 stainless steel desk/wall type • Panel type, IP65 stainless steel front panel and back panel, aluminum body 6 digit, 20 mm red LED 19 000 weighing / 99 1st weight & 99 vec. tare Up to 10xFlintec RC3D digital load cell Standard RS-232C for printer/PC connection 230 V / 50 Hz AC -10 °C / +40 °C, %85 relative humidity

Report of 1st weighed trucks

RS-232C RS-232C, RS-485, 20mA CL ASCII

13

Weight

: 53980 kg

Transit weighing

BX10 Weighing Terminal Beyond the basic weighing

Features • 16.000.000 internal resolution • Big LED display • Programmable via PC • RS-232C serial interface • Ergonomic design with small size BX10MB has Additionaly; • RS485 serial interface • 2 pcs programmable digital In/Out Powerful Calibration • Calibration with test weight • eCal Electronic calibration • Calibration via serial interface • Span calibration under load

BAYKON BX10 is a state-of-the art indicator for industrial weighing applications. It has standard RS-232C serial port and 2 digital port which are programmable as input or output. Powerfull calibration options including eCal electronic calibration without test weights supports easy and fast start up and service. BX10 is featuring adaptive digital filtering for fast settling, display resolution up to 999.999 with extremely stable indication and up to 1600 conversion per second speed. It's small size aluminum body provides perfect panel installation with small space in control panels. Its large 13,5 mm red LED display provides easy reading from far distance.

14

BX10 Specifications Accuracy

Accuracy Class EU Type approval Linearity Temperature coefficient

Display and Keyboard

OIML Class III 10.000 division % 0.0015 FS ≤ 2 ppm/°C

Display Status annunciators Keyboard Key lock

6 digits, 7 segments, red, 13,5 mm high Gross, net, motion, centre of zero, unit 5-keys (function, GN, tare/clear, zero, print) Keys can be locked against unauthorized access

Type Conversion rate Minimum input sensitivity Analogue input range Resolution

24 bit Delta-Sigma ratiometric ADC Up to 1600 measurements per second 0.4 μV/d (Approved); 0.1 μV/d (Non approved) 0 mV to -18 mV (unipolar); -18 mV to +18 mV (bipolar) Internal up to 16.000.000; up to 10 000 increment (Approved); up to 999 999 increment (Non approved)

Calibration

eCal: Electronic calibration without etalon weights sCal: Span calibration of non-emptied tanks 10 step adjustable adaptive digital filter Tare, zeroing, auto zero tracking, motion detection, auto-zero at power-up. Label number, gross, tare indication.

A/D Converter

Calibration and Programming

Digital filter Weighing functions Other functions

Interface

I / O port RS-232C seri port RS-485 seri port Modbus RTU

2 ports can be programmed as digital input or digital output, non-isolated 1200 to 115200 baud, programmable Continuous, Printer, BSI (Baykon Serial Interface) protocol 1200 to 115200 baud, programmable, 8 none 1, 7 even 1, 7 odd 1, 8 even 1 or 8 odd 1, up to 31 units on the bus 1200 to 115200 baud, 8 none 1, 8 even 1 or 8 odd 1, up to 31 units on the RS-485 bus

Excitation Number of load cells Connection

5 VDC, max. 300 mA Up to 8 load cells 350 Ω or up to 24 load cells 1100 Ω (min 43 ohm– max 1200 ohm) 4 or 6 wire technique. Cable length 1000 m/mm² for 6 wire connection

Operation temperature Enclosure

-15°C to +55°C Panel type, aluminum body, plastic front panel, stainless steel rear panel 48mm x 96mm panel size; 100mm depth 12 - 28 VDC, max. 300 mA

Loadcell Connection

Environment And Enclosure

Power Requirement

BX10 Variants

BX10 : BX10 MB :

RS-232C, 2 pcs progmmable digital input and output. Modbus RTU on RS–485 or RS-232C, 2 pcs programmable digital input and output.

50 mm 1,96”

15

BX11 Weighing Indicator Powerful features in small size

Features

• Up to 1600 measurement per second • 16.000.000 internal counter

• • • • • •

Ergonomic design with small size 13,5 mm LED display eCal Electronic calibration Programmable via PC RS-232C & RS-485 serial interface 4 digital input 5 Relay contact output

System Integration • Ethernet TCP/IP • Modbus RTU • Modbus TCP • Profibus • Profinet • CANopen • Analog output

BAYKON BX11 is a smart indicator for industrial weighing process applications offering powerful PLC integration facilities; serial ports as RS-232C, RS-485, 4 digital inputs and 5 digital outputs, Ethernet, analog output and fieldbus connections such as Ethernet, Modbus, Profibus, Profinet, CANopen. Powerful calibration options including Electronic calibration without test weights supports easy and fast start-up and service. BX11 is featuring adaptive filtering for fast settling, high display resolution and 1600 conversion per second speed. It's small size aluminum body provides perfect panel installation with its big display and with its small space need on control panels. The instrument has stainless steel front panel for usage in harsh environment.

16

BX11 Specifications Accuracy

Accuracy Class EU Type approval Linearity Temperature coefficient

OIML Class III 10.000 division % 0.0015 FS ≤ 2 ppm/°C

Display Status annunciators Keyboard Key lock

6 digits, 7 segments, red, 13,5 mm high Gross, net, motion, centre of zero, units 5-key (function, GN, tare/clear, zero, print) Keys can be locked against unauthorized access

Type Conversion rate Minimum input sensitivity Analogue input range Resolution

24 bit Delta-Sigma ratiometric ADC Up to 1600 conversions per second 0.4 μV/d (Approved); 0.1 μV/d (Non approved) 0 mV to +18 mV (unipolar); - 18 mV to +18 mV (bipolar) Internal up to 16.000.000; up to 10.000 increment (Approved); up to 999.999 increment (Non approved)

Calibration

Standard: With etalon weights via keys or via IndFace1X software on serial port eCal: Electronic calibration without etalon weights Fieldbus: Fieldbus commands for zero and span adjustments sCal: Span calibration of non-emptied tanks.

Digital filter Weighing functions Other functions Digital outputs Digital Inputs

10 step adjustable adaptive digital filter Tare, zeroing, auto zero tracking, motion detection, auto-zero at power-up. Label number, gross, tare indication 5 set points with relay contact output. 4 inputs are programmable for zeroing, tare, clear, hold, peak, print etc.

RS-232C

RS-485 Modbus RTU Ethernet TCP/IP or Modbus TCP Profibus Profinet CANopen Analogue

1200 to 115200 baud, programmable Continuous, Printer, BSI (Baykon Serial Interface) protocol 1200 to 115200 baud, 8 none 1, 7 even 1, 7 odd 1, 8 even 1 or 8 odd 1, Up to 31 units on the bus 1200 to 115200 baud, 8 none 1, 8 even 1 or 8 odd 1, up to 31 units on the RS-485 bus 10 Mbit/s (half duplex), galvonically isolated Profibus DP V1. 9,6 kbit/s to 12 Mbit/s automatic baudrate detection 100 Mbit/s (full duplex), galvonically isolated 10 kbit/s to 1 Mbit/s automatic baud rate detection Programmable to 4 – 20 mA, 0 – 20 mA, 0 – 5 VDC or 0 – 10 VDC

Excitation Number of load cells Connection

5 VDC, max. 300 mA Up to 6 load cells 350 Ω or 18 load cells 1100 Ω in parallel 4 or 6 wire technique. Cable length 1000 m/mm² for 6 wire connection

Operation Temperature Enclosure

-15°C to +55 °C; 85% RH max., non-condensing. Stainless stell front panel, aluminum body, stainless steel rear panel. 48mm x 96mm panel size; 100mm depth

Power Requirement

12 to 28 VDC max. 300 mA

Display and Keyboard

A/D Converter

Scale Calibration and Functions

Interfaces

Loadcell Connection

Environment and Enclosure

BX11 Series Instruments

BX11 : BX11 AN : BX11 EN : BX11 MB : BX11 PB : BX11 PN : BX11 CO :

RS-232C, RS-485, 4 input, 5 output Analogue output, RS-485, RS-232C, 2 input, 4 output RS-485 is programmable to Modbus RTU. Ethernet TCP/IP, RS-485, RS-232C, 4 input, 5 output Ethernet port is programmable to Modbus TCP RS-485 is programmable to Modbus RTU. Modbus RTU on RS-485, RS-232C, 4 input, 5 output Profibus DP V1, RS-485, RS-232C, 4 input, 5 output RS-485 is programmable to Modbus RTU. Profinet, RS-485, RS-232C, 4 input, 5 output RS-485 is programmable to Modbus RTU. CANopen, RS-485, RS-232C, 4 input, 5 output RS-485 is programmable to Modbus RTU.

17

BX13 Filling Controller Fast & accurete filling, ergonomic design

Advanced Technology • 16.000.000 internal resolution • Up to 1600 measurement values per second • Display resolution up to 999.999 increment • Easy control 4 Inputs and 7 Outputs • Ergonomic design with small size Filling Modes • Liquid filling for open containers, filling under bung hole or at bottom filling • “Weigh in and emptying” mode for automatic packing machines, bag fillers • Filling and discharging for tanks or silos External Programming • Calibration is performed with or without test weights (eCal) • Easy programming and calibration via RS-232C port by BAYKON “IndFace1x” software • Calibration via PLC interfaces

System Integration • RS-232C • RS-485 • Modbus RTU • Ethernet TCP/IP • Modbus TCP • Profibus • Profinet • CANopen

BX13 is a professional filling controller designed for any type of filling processes of liquid, bulk and granule material with all type of packages. With its 16.000.000 internal resolution, high speed with up to 1600 measurements per second, selectable standard digital and statistical filters, BX13 provides fast and accurate filling results in even environments with vibrations. It has 4 standard filling modes for open container filling and above level bung hole filling; and 2 modes for packing machines. This controller has 4 opto-isolated digital inputs and 5 relay contact outputs, 2 none - isolated output. They use for filling and discharging processes. Powerful calibration options including electronic calibration without test weights supports easy and fast start-up and service. BX13 has powerful PLC integration facilities; serial ports as RS-232C, RS-485 and fieldbus connections such as Ethernet, Modbus, Profibus, Profinet, CANopen. It's small size aluminum body provides perfect panel installation with its big display and with its small space need on control panels.

18

BX13 Specifications Accuracy

Accuracy Class EU Type approval Linearity Temperature coefficient

OIML Class III 10.000 division % 0.0015 FS ≤ 2 ppm/°C

Display Status annunciators Keyboard Key lock

6 digits, 7 segments, LED red, 13,5 mm high Gross, net, filling process steps, centre of zero, unit (kg, lb) 5 key (function, * tare/clear, zero, print), with tactile feedback Key can be locked against unauthorized access

Type Conversion rate Min. input sensitivity Analogue input range Resolution

24 bit Delta-Sigma ratiometric with integral analog and digital filtres Up to 1600 measurement values per second 0.4 μV/d (Approved); 0.1 μV/d (Non approved) -18 mV – 18 mV Internal up to 16.000.000; up to 10 000 increment (Approved); up to 999 999 increment (Non approved)

Calibration Digital filter Weighing functions Process functions

Calibration is performed with or without test weights (eCal) 10 steps programmable adaptive filter Taring, zeroing, auto zero tracking Motion detection; increased resolition error and status messages, tons / hour, total impressions 5 relay contact 250 VAC or 30 VDC, 1 A and 2 non - isolated output 4 opto - isolated digital inputs 12 - 28 VDC, 10 mA

Display and Keyboard

A/D Converter

Scale Calibration and Functions

Digital outputs

Digital inputs

Interfaces RS - 232C

RS - 485 Modbus RTU Ethernet TCP/IP or Modbus TCP Profibus Profinet CANopen

1200 to 115200 baud, 8 none 1, 7 even 1, 7 odd 1, 8 even 1 or 8 odd 1 Continuous, BSI (Baykon Serial Interface) protocol and printer forms 1200 to 115200 baud, 8 none 1, 7 even 1, 7 odd 1, 8 even 1 or 8 odd 1, up to 31 units on the RS-485 bus 1200 to 115200 baud, 8 none 1, 8 even 1 or 8 odd 1, up to 31 units on the RS-485 bus 10 Mbit/s, half dublex, galvonically isolated Profibus DPV1. 9,6 kbit/s to 12 Mbit/s automatic baudrate detection 100 Mbit/s, full dublex, galvonically isolated 10 kbit/s - 1 Mbit/s automatic baud rate detection

Excitation Number of load cells Connection

5 VDC max. 300 mA Up to 8 loadcells 350 1100 Ω in paralel (min 43 ohm - max 1200 ohm) Ω or 25 loadcells 4 or 6 wire technique. Cable length 250 m/mm² for 6 wire connection

Operation temperature Enclosure

-15 ºC to +55ºC; %85 RH max., non - condensing Stainless stell front panel, aluminum body, stainless steel rear panel. 48mm x 96mm panel size; 100mm depth

Protection class Power requirement

Front panel IP65. 12 - 28 VDC, Max. 300 mA

Loadcell Connection

Environment and Enclosure

Application Modes Below Surface Filling

PACKAGING Surface Filling - BAGGING

COARSE FEEDING

VALVE DOWN COARSE FEEDING FINE FEEDING VALVE IS DOWN

COARSE FEEDING FINE FEEDING

Load cell

Filling for Packaging - Bagging

FINE FEEDING

Load cell

Start

Start

Reset

Reset Load cell

19

Filling start Reset Emptying start

Empty

Gate is closed (Switch)

BX14 Weighing Controller For discontinuous totalizer & extraction rate scales

Advanced Technology • 16.000.000 internal resulation • Up to 1600 measurement values per second • Display resolution 999.999 • Easy control with digital 6 Inputs and 5 Outputs • Ergonomic design with small size Smart Process Control • Flow rate control • Totalising control • By-pass functions • Emptying pipe control • Daily total, estimated next 24h total, batch total, turn total, weekly total External Programming • Calibration is performed with or without test weights (eCal) • Easy programming and calibration via RS-232C port by BAYKON “IndFace1x” software • Calibration via PLC interfaces

System Integration • RS-232C • RS-485 • Modbus RTU • Ethernet TCP/IP • Modbus TCP • Profibus • Profinet • CANopen

BX14 is a smart weighing controller and its designed for discontinious totalizer or extraction rate scale applications. BX14 used for flow control on the production line together with totalizing the transferred material. This instrument also gives information estimated next 24h total for the actual flow rate and daily total. Additional 3 accumulations can be used for different purposes like production batch total, turn total, weekly total etc. This controller has 4 opto-isolated digital input, 2 non-isolated digital input and 5 relay contact outputs. They use for filling and disacharge processes. It has 16.000.000 internal resolution and high speed with up to 1600 measurements per second. Powerful calibration options including electronic calibration without test weights supports easy and fast start-up and service. It's small size aluminum body provides perfect panel installation with its big display and with its small space need on control panels.

20

BX14 Specifications Accuracy

Accuracy Class EU Type approval Linearity Temperature coefficient

OIML Class III 10.000 division % 0.0015 FS ≤ 2 ppm/°C

Display and Keyboard

Display Status annunciators Keyboard Key lock

6 digits, 7 segments, LED red, 13,5 mm high Gross, net, centre of zero, 1/hour flow rate, estimated next 24hour total, Total, unit ( kg, t, lb,) 5 key (function, * tare/clear, zero, print), with tactile feedback Key can be locked against unauthorized access

Type Conversion rate Min. input sensitivity Analogue input range Resolution

24 bit Delta-Sigma ratiometric with integral analog and digital filtres Up to 1600 measurement values per second 0.4 μV/d (Approved); 0.1 μV/d (Non approved) - 18 mV to +18 mV Internal up to 16.000.000; display up to 10 000 increment (Approved); up to 999 999 increment (Non approved)

Calibration Digital filter Weighing functions Process functions

Calibration is performed with or without test weights (eCal) 10 steps programmable adaptive filter Taring, zeroing, auto zero tracking, motion detection, increased resolution Flow rate control, totalising control, emptying pipe control, by-pass functions Accumulations; daily total, estimated next 24h total, batch total, turn total, weekly total

Digital outputs

5 relay contact 250 VAC or 30 VDC, 1 A 4 opto - isolated and 2 non - isolated digital inputs 12 - 28 VDC, 10 mA

A/D Converter

Scale Calibration and Functions

Digital inputs

Interfaces RS-232C

RS-485 Modbus RTU Ethernet TCP/IP or Modbus TCP Profibus Profinet CANopen

1200 to 115200 baud, 8 none 1, 7 even 1, 7 odd 1, 8 even 1 or 8 odd 1 Continuous, BSI (Baykon Serial Interface) protocol and printer forms 1200 to 115200 baud, 8 none 1, 7 even 1, 7 odd 1, 8 even 1 or 8 odd 1, 31 units on the bus 1200 to 115200 baud, 8 none 1, 8 even 1 or 8 odd 1, up to 31 units on the RS-485 bus 10 Mbit/s, half dublex, galvonically isolated Profibus DPV1. 9,6 kbit/s to 12 Mbit/s automatic baudrate detection 100 Mbit/s, full dublex, galvonically isolated 10 kbit/s - 1 Mbit/s automatic baud rate detection

Excitation Number of load cells Connection

5 VDC max. 300 mA Up to 8 loadcells 350 1100 Ω in paralel (min 43 ohm - max 1200 ohm) Ω or 25 loadcells 4 or 6 wire technique. Cable length 1000 m/mm² for 6 wire connection

Operation temperature Enclosure

-15 ºC to +55ºC; %85 RH max., non - condensing Stainless stell front panel, aluminum body, stainless steel rear panel. 48mm x 96mm panel size; 100mm depth

Protection class Power requirement

Front panel IP65. 12 - 28 VDC, Max. 300mA

Loadcell Connection

Environment and Enclosure

Application Modes Discontinuous Totalizer

Extraction Rate Scales

COARSE FEED FINE FEED

Raw material input ( t/h Screen )

Load cell Filling start Reset Emptying start By-Pass

t/h Screen & Total

Grinding/Processing

Full (End of filling) Empty Gate is closed (switch) End of Emptying Emptying pipe is closed (sensor)

Central processing unit

21

BX18 Weighing Indicator DIN rail mounted weighing instrument

Features • 14mm LED display • Up to 1600 convertion/sec • Calibration via keys and by PC/PLC through interfaces • Electronic calibration (eCAL) without test weights • Span calibration (sCAL) of non-empty tanks. System Integration • RS-232C serial port • RS-485 serial port • Modbus RTU • Analog selectable as 0-20mA, 4-20mA, 0-5 VDC and 10 VDC • Parallel I/O port as 4 x Inputs and 6 x Outputs

BAYKON BX18 is a DIN rail mounted indicator to install in a cabinet for intensive dusty enviroment. It offers RS-232C, RS-485, Analog output, Parallel port including 4 x Inputs and 6 x Outputs, Modbus RTU fieldbus interfaces as standard. Powerful calibration options including electronic calibration without test weights, span calibration of non-empty tanks support easy and fast installation and service. BX18 is featuring 10 step adaptive filter for fast settling, up to 999.999 display resolution and 1600 conversion per second. Programming and calibration can be executed via device keys and by PC/PLC through serial ports and fieldbus. BX18 is powered by from 12-28 volt DC supply.

22

BX18 Specifications Accuracy

Linearity Temperature coefficient

% 0.0015 FS ≤ 2 ppm/°C

Display and Keyboard Display Status annunciators Keyboard

Key lock A/D Converter Type Conversion rate Minimum input sensitivity Analogue input range Resolution D/A Converter Type Max. cable length Max. load resistance (current output) Scale Calibration and Functions Calibration

6 digits, 7 segments, red, 14 mm high Gross, net, motion, centre of zero, units (kg, g, t, lb, klb, N, kN) 5-key (function, GN, tare/clear, zero, print) Keys can be locked against unauthorized access 24 bit Delta - Sigma ratiometric ADC Up to 1600 conversions per second 0.1 μV per interval 0 mV to + 18 mV (unipolar) ; -18mV to +18mV (bipolar) Internal up to 16.000.000; display up to 999.999 d 16 bit D/A converter 300 meter

500 Ω

Standard: By etalon weights via keys or serial port via IndFace1x software eCal: Electronic calibration without etalon weights sCal: Span calibration of non-emptied tanks.

Digital filter Weighing functions Other functions Digital outputs Digital Inputs Interfaces RS-232C

10 step adjustable adaptive digital filter Tare, zero ing, auto zero tracking, motion detection, auto-zero at power-up. Label number, gross, tare indication 6 set points with relay contact output. 4 opto-isolated inputs are programmable for zeroing, tare, clear, hold, peak, print etc.

RS-485 Modbus RTU Analogue Loadcell Connection Excitation Number of load cells Connection Environment and Enclosure Operation Temperature Enclosure

1200 to 115200 baud, 8 none 1, 7 even 1, 7 odd 1, 8 even 1 or 8 odd 1, Up to 31 units on the bus 1200 to 115200 baud, 8 none 1, 8 even 1 or 8 odd 1, up to 31 units on the RS-485 bus Programmable to 4 – 20 mA, 0 – 20 mA, 0 – 5 VDC or 0 – 10 VDC

Power Requirement

1200 to 115200 baud, programmable Continuous, Printer, BSI (Baykon Serial Interface) protocol

5 V DC, max. 300 mA Up to 6 load cells 350 Ω or 18 load cells 1100 Ω in parallel 4 or 6 wire technique. Cable length 274 m/mm² for 6 wire connection -15°C to +55°C; 85% RH max, non-condensing. Polycarbonate, mounting in standard DIN rails, IP20 89,7 mm x 107,6 mm x 62,2 mm 12 – 28 VDC, Max. 300 mA

23

BX21 Weighing Indicator Counting, classifying & dynamic weighing

Standard Features • 25mm wide angle LCD display with back light • OIML approved • Up to 30000d display resolution • 2 programmable function keys and navigation keys provide easy operation • Linearity correction • Li-ion long life rechargable battery • Multi-language ticket • Accumulated weighing • RS-232C data output • 2nd RS-232C port option • Stand and wall mount accessories

Basic Weighing Mode • Multiple tare • Auto tare • Unit change • Ticket with Date, Time, Ticket no, Gross, Tare & Net Weight Counting Mode • 100 pcs Average Part Memories (APW) • APW optimization Classifying • 100 product memories • Under, OK, Over Status Bars on display • Acoustic warning with buzzer Animal Weighing • Smart dynamic weighing algorithm for animal weighing

30

BX21 is low cost, high quality general purpose weighing indicator in plastic housing. The instrument is approved by Weights & Measures Authorities for use in Accuracy Class III applications with intervals according to OIML R76. Weighing, Counting, Classifying and Dynamic Weighing for animals are standard operation modes. It has 100 Average Part Memories for Counting and 100 product memories for Classifying. Under, Ok, Over Status bars and programmable buzzer for operator prompting are available is classifying mode. Easy and practical operation via navigation keys with two programmable function keys and 25mm wide angle, multi colour back LCD display. BX21 is powered by AC power adaptor and re-chargable Li-ion long life battery. Stand and wall mount accesories are available.

24

BX21 Specifications

Accuracy

OIML R76 Class III

EU Type approval

6.000 intervals (single range) or 2 X 6000 intervals (multi range)

Resolution Weighing units Unit change Display Buzzer Auto Power Off Taring Filter G/N selection Totalizing Counting Operation APW memory Sampling quantity Classifying Product memory size Operator prompting Dynamic Weighing Animal weighing Weight Ticket Ticket format Date format Printout language Print Samples

16.000.000 internal, up to 30000d display resolution g, kg, oz, lb If enabled, g-oz and kg-lb change by pressing Function key 112x40mm extra wide angle backlighted LCD with 25mm digit height Different buzzer mode for operator promting in classifying mode Programmable for saving battery life Selectable as No tare, Multiple, Automatic and Tare-Clear in sequence Selectable as Very Low If enabled, G/N indication by pressing Function key 2 x seperate memories for Weighing and Counting Sampling or using Average Part Memory (APW), APW optimization is available 100 different parts Selectable as 10,20,30,50,100 pcs 100 different products Under, OK, Over status bars on display and programmable buzzer Supported by smart dynamic weighing algorithms Programable for different weighing modes. It may include Date, Time, Ticket No, Gross, Tare and Net weights Programable as dd.mm.yyyy, mm.dd.yyyy or yyyy.mm.dd English, Turkish, German, French, Spanish Weighing

Dynamic Weighing

Counting

Classifying

Weighing number #000010 15-09-2012 01:04:03

Weighing number #000014 15-09-2012 01:08:57

Weighing number #000018 15-09-2012 01:14:39

Gross Tare Net

Dyn Gross 4.771 kg Tare 1.675 kg Dyn Net 3.096 kg

Gross Tare Net

4.771 kg 1.675 kg 3.097 kg

4.770 kg 1.675 kg 3.096 kg

Weighing number #000024 15-09-2012 01:24:06 Gross Tare Net

1.705 kg 1.675 kg 0.030 kg OK

Piece Weight 0.00100 kg Quantity 3096 pcs Interface Communication port Data output Housing Mounting accesories Power Battery

RS-232C standard. 2nd RS-232C is optional Demand, Continuous and Fast Continuous ABS, IP30 protected, 220x110x55mm in sizes As standard for Stand and wall mount accesories are available 100-230 VAC, 50-60 Hz adaptor 2000mAh Li-ion, up to 36 hours countinuous operation for single load cell and 24 hours continuous operation for 4x350 Ohm loadcells.

Mounting nut

Sealing hole

Power plug

RS-232C

RS-232C (Optional)

Load cell Battery case

25

BX21S Weighing Indicator Multi colour and stainless steel housing

Standard Features • 25mm wide angle LCD display with multi colour backlight • OIML approved • Up to 30000d display resolution • 2 programmable function keys and navigation keys provide easy operation • Linearity correction • Li-ion long life rechargable battery • Multi-language ticket • Acumulated weighing • RS-232C data output • 2nd RS-232C port option • Stainless steel housing

ay

ulti

Disp l

M

Basic Weighing Mode • Multiple tare • Auto tare • Unit change • Ticket with Date, Time, Ticket no, Gross, Tare & Net Weight Counting Mode • 100 pcs Average Part Memories (APW) • APW optimization Classifying • 100 product memories • Under, OK, Over Status Bars on display • Acoustic warning with buzzer Animal Weighing • Smart dynamic weighing algorithm for animal weighing

u Colo r

BX21S is low cost, high quality general purpose weighing indicator in stainless steel housing. The instrument is approved by Weights & Measures Authorities for use in Accuracy Class III applications with intervals according to OIML R76. Weighing, Counting, Classifying and Dynamic Weighing for animals are standard operation modes. It has 100 Average Part Memories for Counting and 100 product memories for Classifying. Under, Ok, Over Status bars and programmable buzzer for operator prompting are available is classifying mode. Easy and practical operation via navigation keys with two programmable function keys and 25mm wide angle LCD display with multicolor backlighting BX21S is powered by AC power adaptor and re-chargable Li-ion long life battery. Stand and wall mount accesories are available.

26

BX21S Specifications

Accuracy EU Type approval Resolution Weighing units Unit change Display Buzzer Auto Power Off Taring Filter G/N selection Totalizing Counting Operation APW memory Sampling quantity Classifying Product memory size Operator prompting Dynamic Weighing Animal weighing Weight Ticket Ticket format Date format Printout language Print Samples

OIML R76 Class III 6.000 intervals (single range) or 2 X 6000 intervals (multi range)

16.000.000 internal, up to 30000d display resolution g, kg, oz, lb If enabled, g-oz and kg-lb change by pressing Function key 112x40mm extra wide angle multi color backlighted LCD with 25mm digit height Different buzzer mode for operator promting in classifying mode Programmable for saving battery life Selectable as No tare, Multiple, Automatic and Tare-Clear in sequence Selectable as Very low, Low, Medium and High If enabled, G/N indication by pressing Function key 2 x seperate memories for Weighing and Counting Sampling or using Average Part Memory (APW), APW optimization is available 100 different parts Selectable as 10, 20, 30, 50, 100 pcs 100 different products Under, OK, Over status bars on multi color display and programmable buzzer Supported by smart dynamic weighing algorithms Programable for different weighing modes. It may include Date, Time, Ticket No, Gross, Tare and Net weights Programable as dd.mm.yyyy, mm.dd.yyyy or yyyy.mm.dd English, Turkish, German, French, Spanish Weighing

Dynamic Weighing

Counting

Classifying

Weighing number #000010 15-09-2012 01:04:03

Weighing number #000014 15-09-2012 01:08:57

Weighing number #000018 15-09-2012 01:14:39

Weighing number #000024 15-09-2012 01:24:06

Gross Tare Net

Dyn Gross 4.771 kg Tare 1.675 kg Dyn Net 3.096 kg

Gross Tare Net

Gross Tare Net

4.771 kg 1.675 kg 3.097 kg

4.770 kg 1.675 kg 3.096 kg

1.705 kg 1.675 kg 0.030 kg OK

Piece Weight 0.00100 kg Quantity 3096 pcs Interface Communication port Data output Housing Mounting accesories Power Battery

RS-232C standard. 2nd RS-232C is optional Demand, Continuous and Fast Continuous Stainless steel, IP65, 224X134 mm As standard for Stand and wall mount accesories are available 100-230 VAC, 50-60 HZ adaptor, optional 12VDC input 2000mAh Li-ion, up to 36 hours countinuous operation for single load cell and 24 hours continuous operation for 4x350 Ohm loadcells.

27

BX27 Weighing Indicator Big display at industrial weighing

Features • Up to 999.999 display resolution • 16.000.000 internal resolution • Electronic calibration (eCAL) without test weight • Programmable via PC

Outdoor Usage • Sun visor (standard) • Serial interface via RS-232C, RS-485 or 20mA Current Loop • Stainless steel robust housing

BX27 designed for industrial weighing applications to provide long distance reading such as crane operators working with scale or as outdoor big display for weighbridges with BAYKON PC software. It has stainless steel robust housing for heavy industrial environment and outdoor usage with standard sun visor. It has LED display 57mm digit height. Key functions executed with keys on front panel, remotely via cable and through serial interface. BX27 can be configured up to 999.999 display resolution and offers serial interfaces RS-232C, RS-485 or 20mA CL.

28

BX27 Specifications Accuracy

Linearity Temperature coefficient

% 0.0015 FS ≤ 2 ppm/°C

Display Status annunciators Keyboard

6 digits, 7 segments, LED red, 57 mm high Gross, Net, motion, centre of zero, 1. Range, 2. Range 7-key

Type Conversion rate Min. input sensitivity Analogue input range Resolution

24 bit Delta-Sigma ADC Up to 1600 measurements per second 0,1 µV per interval - 18 mV to +18 mV Internal up to 16.000.000; display up to max. 999.999 counts

Calibration

Standard: By etalon weights via keys or serial port via IndFace1x software eCal: Electronic calibration without etalon weights

Digital filter Weighing functions Other functions RS-232C

10 steps programmable adaptive filter Tare, zeroing, auto zero tracking, motion detection, auto-zero at power-up. Label number, gross, tare indication 1200...57600 baud, programmable Continuous, Printer, BSI (Baykon Serial Interface) protocol 1200...57600 baud, programmable, up to 31 units on the RS-485 bus Continuous, Printer, BSI (Baykon Serial Interface)

Display and Keyboard

A/D Converter

Scale Calibration and Functions

RS-485 20mA CL

Loadcell Connection

Excitation Number of load cells Connection

5 VDC max. 300mA Up to 6 load cells 350 Ω or 18 load cells 1100 Ω in parallel 4 or 6 wire technique. Cable length 274 m/mm² for 6 wire connection

Operation Temperature Enclosure

-15ºC to +55ºC; %85 RH max., non - condensing Wall type, Stainless steel Front panel IP65. 18 cm x 47 cm x 7 cm 230 VAC, 50 Hz, 500mA 24 VDC, 1.5A

Environment and Enclosure

Power requirement

29

BX6W/BX 6W(D) Scale Terminals All type of truck weighing solutions

Features: • Robust industrial housing; stainless steel cover and front panel, galvanized body • Operates with standard PC keypad and VGA monitor • 20mm bright LED display • OIML 10000e, 2x6000e approved • Interfaces; 2xRS-232C, 1xRS-485, 2xUSB and Ethernet TCP/IP ports

Functional Advantages: • Standard weighing, Automatic weighing without operator and Automatic filling on weighbridge • User configurable weighing menu and weight ticket • Flexible and detailed reporting • Weighing by vehicle codes • Networking as multiple scales • Automatic & manual data export • Multi language menus • Web service understructure enables data transfer to SQL / Oracle database through internet • Connectable devices: - Traffic lights - Barriers & Optic sensors for vehicle positioning - Alphanumeric message display - Remote scale display - Proximity card reader - RFID magnetic card reader

BX6W is a multi language terminal designed for all type of truck and rail scale automations. Its user configurable weighing menu, weight ticket, tables for data entry and vehicle coding features provide easy, practical and error free usage. BX6W(D) is designed to work with Flintec RC3D Digital load cells. Automatic and manual data export, web service understructure providing direct host integration through Internet are important privileged features. Direct connection to vehicle identification devices such as RFID and proximity card readers, peripherals such as traffic lights, barriers, optic sensors, message displays and up to 3 IP cameras.

30

Technical Specifications

Approval Housing

Load cell Connection Display Interfaces Power Temperature

OIML 10000e, 2 x 6000e Stainless steel cover and front panel, galvanized body BX6W - 6 x 350 Ω or 18 x 1100Ω BX6WD - Up to 10 pcs Flintec RC3D Load cells 20 mm bright red LED 3 x RS-232C/RS-485, 2 x USB, Ethernet TCP/IP port 90-260 VAC, 50/60 Hz -10°C +40°C, %85 relative humidity

Functional Advantages

• Standard weighing, automatic weighing without operator and automatic filling on weighbridge • User configurable weighing menu, weight ticket and user authorizations. • Tables for data entry and vehicle coding support for easy and practical operation with less error. • Standard and user configurable detailed reports. • Automatic and manual data export • Multi scale networking • Peripherals: Traffic lights, Optic position sensors, Barriers, RFID reader, Proximity card reader, Numeric and alphanumeric remote displays, KIOSK ticket printer, 3x IP cameras.

BX6W Weighing Menu Submenus can be accessible via mouse and keyboard. User configurable weighing menu, pre-entered tables for customers, suppliers, products, etc. for easy weighing operations. 1st weighed trucks are listed on main weighing menu. During 2nd weighing operation, 1st weighed truck ID is selected from vehicles window. Control panel indicates status of all peripherals to trace weighing process and error status.

31

BX61 Weighing Terminal User programmable for transactional applications

Applications • Smart barcode labelling • Data collection as text file Export and SQL level • SQC-Net weight control • Checkweighing • Counting systems • Formulation & batching Pheripherals • Up to 4 platforms • Precision balance • Barcode scanner • Proximity card reader • Receipt printer • Barcode label printer • PC keypad & mouse

BAYKON BX61 is programmable terminal designed for industrial weighing applications; counting, checkweighing, SQC terminal for net weight control of prepacked products, vibrating batchers.

Interface • Infrared sensors as Print & Tare functions (only desk top model) • Ethernet • 2 x RS-232, 2 x USB • Digital 4in/4out

BX61 terminal offers simultanous operation up to 4 weighing platforms and precision balances, barcode scanners, magnetic card readers, receipt and label printers, external PC keypad and mouse, external buttons, relays and PLCs over parallel I/Os.

It is available as desk top plastic housing and panel type with stainless steel,IP65 front panel. It is equipped with a 5.7”colour graphic display with touch panel and membrane keypad.

BX61 offers perfect data integration features; data export as text file, SQL level transfer and carrying data via USB flash.

32

BX61 Specifications Accuracy

Accuracy Class EU Type approval

OIML Class III 6.000 intervals

Display Keyboard Infrared sensors Status annunciators

5,7" with touch panel 8-key membrane 2 (for BX61 desk type ) Gross, net, motion, centre of zero, information, power, unit

Display and Keyboard

A/D Converter

Analog input range Max. voltage per verification interval Min. voltage per verification interval

0 - 19,5 mV 3,25 µV 0,5 µV Legal for trade

Processor Memory Operation System

ARM 200 MHz RAM 64 MB, Flash 1 GB Windows CE 6.0

System

Scale Functions and Calibration Multi Range Zero

Tare Calibration

One, two or three range Zero indication Initial zero setting ≤20 % Max Zero tracking ≤4 % Max Automatic or semi-automatic zero setting Automatic or semi-automatic tare balancing (Subtractive) Calibration and set-up mode via switch on the main board, gravity factor setup

Connectable platforms Load cell Excitation Minimum load cell impedance Maximum load cell impedance Cable Connection Interface Digital input / Outputs

2 (for BX61 desk/wall type ) 5 VDC, max. 100 mA 80 1200 4 or 6 wire + shield 2×RS 232, 2×USB, Ethernet 4in / 4out

Operation temperature Humidity Enclosure and IP protection

-10 °C to +40 °C legal for trade 85% RH max, non-condensing. Plastic desk /wall type (BX61) ,IP54 Stainless steel panel type (BX61P), Front panel IP 66/67, construction IP 32

Power Supply

Desk/Wall Type • • • (Option)

Connections

Environment and Enclosure

120÷230VAC ,50/60 Hz 10÷15VDC 6V rechargable battery

Panel Type – • • (Option)

71

" 5,7

67 206

29 33

140

"

138,4

156

5,7

18°

~120

215

BX62 Weighing Terminal Advanced terminal for harsh conditions

Applications • Smart barcode labelling • Data collection as text file Export and SQL level • SQC-Net weight control • Checkweighing • Counting systems • Formulation & batching Pheripherals • Up to 4 platforms • Precision balance • Barcode scanner • Proximity card reader • Receipt & Label printer • PC keypad & mouse

Standard Interface • Ethernet • 2 x RS-232, 2 x USB • Digital 3in/3out Options; • Profibus DP • Analog out (4-20 mA / 0-10 V) • RS485 and RS232C • Up to digital 8in/8out

BX62 terminal is designed to extend the applications of an intuitive terminal BX61 to be used in harsh industrial conditions. It is achieved by modifying technical features and adding membrane QWERTY keyboard and separate numerical and function keys. BX62 terminal offers simultanous operation up to 4 weighing platforms and precision balances, barcode scanners, magnetic card readers, receipt and label printers, external PC keypad and Mouse and supports industrial interfaces as Profibus DP, RS485, Analog output (4-20mA & 0-10 V) and Digital 8in/8out. BX62 offers perfect data integration features; data export as text file, SQL level transfer and carrying data via USB flash.

34

BX62 Specifications Accuracy

Accuracy Class EU Type approval

OIML Class III 6.000 intervals

Display Status annunciators Keyboard

5,7" with touch panel Gross, net, motion, centre of zero, information, power, unit QWERTY membrane keyboard and separated function and numeric keys.

Analog input range Max. voltage per verification interval Min. voltage per verification interval

0 - 19,5 mV 3,25 µV 0,5 µV Legal for trade

Display and Keyboard

A/D Converter

System

Processor Memory Operation System

Functions and Calibration Functions

Software versions

Calibration Alibi Memory

Connections

Connectable platforms Load cell Excitation Minimum load cell impedance Maximum load cell impedance Cable Connection Interface Digital input / Outputs

Environment and Enclosure

ARM 200 MHz RAM 64 MB, Flash 1 GB Windows CE 6.0 • Parts counting in industrial systems; • Labeling in industrial weighing systems; • Simultaneous operation of maximum 4 weighing platforms; • Intuitive operation through terminal's touch screen; • Support of industrial interfaces: Profibus, RS485; • Connecting terminals into a network by application of Ethernet technology. • Standard (functions: labeling, parts counting, percent setup); • Single stand CPG (Control of Prepacked Goods); • Mass comparator; • Network version of CPG. Calibration and set-up mode via switch on the main board, gravity factor setup Memory modul used as a database system acting as a long term memory. It saves automatically weighing results and using an embedded solid state USB disc. 4 5 VDC, max. 100 mA 80 1200 4 or 6 wire plus shield 2×RS 232, USB, Ethernet 3in / 3out

Operation temperature Humidity Enclosure and IP protection

-10 °C to +40 °C legal for trade 85% RH max, non-condensing. Stainless steel IP 66/67 100÷230VAC, 50/60 Hz, 10-24VDC Optional

I/O8 module

8 IN (optoisolated input with input voltage within 5 – 24V DC) 8 OUT (reed relay output type NO, 50V DC 0, 2A) 4 IN (optoisolated input with input voltage within 5 – 24V DC) 4 OUT (reed relay output type NO, 50V DC 0, 2A) Power loop 4-20mA, 0-20mA, voltage loop 0-10V PROFIBUS DP Module RS 485, RS 232 External PRINT, TARE keys, Multi range

Power Supply Options

I/O4 module AN xxx module Profibus module Additional series interfaces Other

35

BX66 Scale Terminal Weighing computer for industrial application

Application Softwares • Labelling & data collection • Truck Scale • Formulation • SQC- net weight control

Advantages • User configurable menus • Connectable pheripherals; PC keypad & Mouse, receipt & label printers, Barcode scanners, remote display • Easy to clean stainless stell housing • Touch screen 10.1” TFT LCD display • Desk top or wall mouth usage • Simultaneous operation with 2 x platform and precision balance Data Transfer & Interfaces • Automatic & manuel data export • Web service understructure enables SQL level transfer • Data transfer with USB flash • 2xRS232C & 2xUSB ports • Centronics parallel printer AXD • Ethernet TCP/IP

BX66 is Windows CE based industrial weighing computer designed for transactional weighing processes in harsh and hygenic enviroments. Its stainless steel enclosure with 10” touch scren colour display provides intuitive operation, flexiblity and ergonomy for desk top and Wall mount usage. BX66 terminal has standard application softwares; labelling and data collecting, truck scale, SQC - net weight control and formulation. Depending on the application, it offers simultanous operation with 2 weighing platforms and precision balances and direct connection to barcode scanners, magnetic card readers, receipt and label printers, remote display, IP Cameras, external PC keypad and mouse, PLCs to provide parallel I/Os. BX66 offers perfect data integration features; automatic and manuel data export as text file, SQL level transfer via WEB service and carrying data with USB flash.

36

BX66 Specifications

Accuracy

Accuracy Class EU Type approval Resolution

OIML Class III* 6.000 division Internal up to 16.000.000; display up to 100.000 counts

Display Keyborad Status annunciators

Active TFT Color LCD, 10, 1 inc. with touch panel Soft Keys (Tare, clear, zero, print and functions) Gross, net, motion, centre of zero, units

Type Conversion rate Minimum input sensitivity Analogue input range

24 bit Delta-Sigma ratiometric ADC Up to 1600 conversions per second 0.4 μV Legal for trade (0.1 μV per interval industrial) 0 mV – 18 mV

Processor Memory Operation System Max. Scale Connection Calibration

Alibi Memory Interface

486DX-1Ghz RAM 256 MB, Flash 1 GB Windows CE 2 x Analog Load cell platform + Precision balance connection (via the serial port) Standard: By etalon weights via keys or serial port via INDFACE software eCal: Electronic calibration without etalon weights 10 step adjustable adaptive digital filter Tare, zeroing, auto zero tracking, motion detection, auto-zero at power-up. Truck Scale (BX66-Truck) Formulation (BX66-Form) Labelling (BX66-Label ) Statictistical Quality Control (BX66-SQC) Automatically weighing results, up to 1.000.000 record 2 x USB, 2 X Serial (RS232C), 1 X Parallel, 1 X Ethernet (10/100)

Excitation Number of load cells Connection

5 VDC, max. 100 mA Up to 6 load cells 350 Ω or 18 load cells 1100 Ω in parallel Connection 4 or 6 wire technique. Cable length 1000 m/mm² for 6 wire connection

Operation temperature Humidity Enclosure Power Requirement

-10 °C to +40 °C legal for trade 85% RH max, non-condensing Desk type, Stainless Steel, IP32 90÷240 V AC, 50/60 Hz

Display and Keyboard

A/D Converter

System

Digital filter Weighing functions Software versions

Load Cell Connection

Environment and Enclosure

*Pending

37

TX1 & TX1W Transmitters Analogue signal conditioner

eCal - Electronic calibration • With “xFace” PC software, calibration without using test weights and loading set points. • Especially big advantage at heavy capacity tank, silo and other weighing applications.

System integration • 0-10 V & 4-20 mA signal output options • Zeroing input • 2 set point outputs • Error outputs

TX1 and TX1W analogue transmitters are accurate and economic amplifier, easy to integrate into process control systems. By its “digital heart”, TX1 and TX1W allow a comfortable calibration and set up with a combination of LED's and push buttons. Signal output is programmable 0-10 V or 4-20 mA. Opto-isolated 2 setpoints, 1 error output and 1 input for zeroing by external command on TX1W. External calibration including electronic calibration (xFace) and setpoint values loading of TX1W can be executed through RS-232C port.

38

TX1 Specifications

Input & A/D Converter Linearity Analogue input range Min. input range A/D converter Conversion rate Scale Calibration & Analogue Output Calibration Digital filter Weighing functions D/A Converter Analogue output Input / output (TX1W) Load Cells Excitation Number of Load Cells Connection Setup & Communication Front panel Power Power supply Environmentand Enclosure Operation Temperature Humidity Enclosure

< % 0.01 0 mV – 18 mV < 1 mV 24 bit Delta-Sigma ratiometric with integral analog and digital filters TX1 100 measurement per second, TX1W 400 measurements per second Performed via the front keys. For TX1W, calibration can be done by xFACE software tool with/without etalon weights. 2 step adjustable digital adaptive filter (TX1), 10 step adjustable digital filter (TX1W) Zeroing via opto-isolated digital input (TX1W) 16 bit 0-10 V or 4-20 mA 2 opto-isolated outputs for setpoints, 1 opto-isolated output for error and 1 opto-isolated input for zeroing 5 VDC Up to 4 units of 350 Ω or 12 units of 1100 Ω (min 85 ohm - max 1200 ohm ) 4 or 6 wire technique. Cable length 274 m/mm² for 6 wire connection. Membrane keypad including 2x LED (Run and Error) and 3x programming keys 230 VAC, 50/60 Hz, 6 VA 24 VDC. 0.2 A Between -15 °C and +55 °C At 85% RH max, non-condensing. Polyamide, for DIN-rail mount, IP20

0-10V or 4-20mA output Zeroing input Error output Set point output

Tank weighing

Tensile and compressive tests

39

Strength measurement

Process control applications

TX2 Digital Load Cell Transmitters Precise Digital Weighing Data to PLC

Features • Communication: RS-232C, RS-485, Ethernet TCP/IP, Profibus, Modbus RTU, Modbus TCP/IP Profinet, CANopen • High speed: 800 convertions/sn • Weighing functions: Zeroing & taring power-on zero, AZT, net indication at power on, motion detection • Software support: Windows based BAYKON xFace software for calibration and setup via PC • eCal: Electronic calibration without test weight • Vibration filter: Configurable active filter for stable weight

TX2 digital transmitter family is designed for static or dynamic weighing and force measurement processes to provide fast and accurate digital data through RS-232C, RS-485, Ethernet TCP/IP and bus systems as Profibus, Modbus TCP, Modbus RTU, Profinet, CANopen. Weighing functions such as Zeroing, Taring, Power-On zero, Net indication at power on, Motion detection, etc. are integrated in TX2 transmitters. Configurable vibration suppression digital filter settings and calibration with test weight or electronic calibration without test weights (eCal) via Windows based BAYKON xFace software. DIN rail type enclosure provides easy montage in control panel.

40

TX2 Specifications TX2 Series Instruments

A/D Converter Type Conversion rate Minimum input voltage Minimum input sensitivity Analogue input range Linearity Resolution

Scale Calibration and Functions Calibration Digital filter Weighing functions Load Cell Excitation Number of load cells Connection Communication Serial Interface RS-232C Serial Interface RS-485 (TX2-AD and TX2-MB) Modbus RTU interface (TX2-MB) Modbus TCP/IP (TX2-EN) Profibus DP V1 interface (TX2-PB) ProfiNet interface (TX2-PN) CANopen interface (TX2-CO) Power Supply and Others Power Supply Enclosure Operation Conditions

TX2-AD : RS-232C and RS-485 TX2-EN : Ethernet Modbus TCP/IP TX2-MB : Modbus RTU TX2-PB : Profibus DP TX2-PN : Profinet TX2-CO : CANopen 24 bit Delta-Sigma ratiometric with integral analog and digital filters Up to 800 measurements per second < 1 mV 0.1 µV per interval 0 mV to 18 mV unipolar or -18 mV to 18 mV bipolar

Within 0.0015% FS, 2 ppm/°C Internal up to 8 000 000; External up to 100 000 counts in Weighing / Force modes, 1 000 000 counts for unipolar input and for selected range in Count mode and 2 000 000 counts for bipolar input and for selected range in Count mode

By etalon weights: Via xFace software or fieldbus eCal: Electronic calibration without etalon weights via xFace Count mode: All instruments are adjusted in production for equal performance. Calibration at PLC side 10 step adjustable digital adaptive filter Tare, zero, auto zero tracking, motion detection, auto-zero at power-up 5 VDC, max. 100 mA Up to 6 load cells 350 Ω or 18 load cells 1100 Ω in parallel 4 or 6 wire technique. Cable length 274 m/mm² for 6 wire connection 9600 baud, 8 None 1, Continuous or demand (BSI mode) 1200 to 57600 baud, 7 even/odd, 8 None 1, demand (BSI mode) or Modbus RTU Up to 31 units on the bus, Baudrate up to 57600 10Mbits (half dupplex), galvanically isolated 9,6 kbits/s to 12 Mbits/s automatic baudrate detection 100Mbits (full dupplex), galvanically isolated 10 kbits/s to 1 Mbits/s automatic baudrate detection 11 to 28 VDC, max. 100 mA (TX2-AD and TX2-MB), max. 300 mA (others) Between -15°C and +55°C at 85% RH max, non-condensing Polyamide, for DIN-rail mount, protection class IP20

RS-232C RS-485 Modbus RTU Ethernet Modbus TCP/IP Profibus DP Profinet CANopen

41

TX4 Digital Load Cell Transmitters Precise Digital Weighing Data to PLC

Features • Communication: RS-232C, RS-485, Ethernet TCP/IP, Profibus, Modbus RTU, Profinet, CANopen • High speed: 800 conv./sec • Anti-vibration filter: Adaptive antivibration active filter for fast and stable reading • Weighing functions: Taring, AZT, zeroing, power on zero, net indication at power on, motion detection • eCal: Electronic calibration without test weights • Digital I/O: Parallel port with 1 x Output and 2 x configurable as Inputs or Outputs • Software support: Windows based BAYKON xFACE software for calibration and setup via PC

TX4 digital transmitter family is designed for static or dynamic weighing and force measurement processes to provide fast and accurate digital data through RS-232C, RS-485, Ethernet TCP/IP and bus systems as Profibus, Modbus TCP, Modbus RTU, Profinet, CANopen. TX4 transmitters have a parallel port including 1 x Output and 2 configurable as Inputs or Outputs which can be controlled directly by PLC. TX4 transmitters are programmed and calibrated via PC by BAYKON xFace software. Weighing functions such as Zeroing, Taring, Power-On zero, net indication at power on, Motion detection, configurable vibration suppression digital filter and electronic calibration without test weights (eCal) are important features. DIN rail type enclosure provides easy montage in control panel.

42

TX4 Specifications TX4 Series Instruments

TX4-AD TX4-EN TX4-MB TX4-PB TX4-PN TX4-CO

A/D Converter Type Conversion rate Minimum input voltage Minimum input sensitivity Analogue input range Linearity Resolution

: RS-485 : Modbus TCP/IP : Modbus RTU : Profibus DP : Profinet : CANopen

24 bit Delta-Sigma ratiometric with integral analog and digital filters Up to 800 measurements per second < 1 mV 0.1 µV per interval

Scale Calibration and Functions Calibration Digital filter Weighing functions Scale Calibration and Functions Hardware Function Load Cell Excitation Number of load cells Connection Communication Serial Interface RS-232C Serial Interface RS-485 (TX4-AD and TX4-MB) Modbus RTU interface (TX4-MB) Modbus TCP and Ethernet TCP/IP (TX4-EN) Profibus DP V1 interface (TX4-PB) Profinet interface (TX4-PN) CANopen interface (TX4-CO) Power Supply and Others Power Supply Enclosure Operation Conditions

0 mV to 18 mV unipolar or -18 mV to 18 mV bipolar Within 0.0015% FS, 2 ppm/°C Internal up to 16 000 000; External up to 100 000 counts in Weighing / Force modes, 1 000 000 counts for unipolar input and for selected range in Count mode and 2 000 000 counts for bipolar input and for selected range in Count mode

By etalon weights: via xFace software or fieldbus eCal : Electronic calibration without etalon weights via xFace Count mode: No calibration. All instruments are adjusted in production for high calibration accuracy 10 step adjustable digital adaptive filter Tare, zeroing, auto zero tracking, motion detection, auto-zero at power-up, net indication at power on 1 output (max.100 mA per output) and 2 configurable I/O (11 to 28 VDC input signal range, max. 100 mA per output) Outputs are programmable for set points with/without threshold, tolerance band output or control output via PLC/PC. Inputs can be used for zeroing, taring or control input to PLC/PC. 5 VDC, max. 100 mA Up to 6 load cells 350 Ω or 18 load cells 1100 Ω in parallel 4 or 6 wire technique. Cable length 274 m/mm² for 6 wire connection 9600 baud, 8 None 1, xFace connection 1200 to 57600 baud, 7 even/odd, 8 None 1, continuous demand (BSI mode) or Modbus RTU Up to 31 units on the bus, Baudrate up to 57600 10Mbits (half dupplex), galvanically isolated 9,6 kbits/s to 12 Mbits/s automatic baudrate detection 100Mbits (full dupplex), galvanically isolated 10 kbits/s to 1 Mbits/s automatic baudrate detection 11 to 28 VDC, max. 100 mA (TX4-AD and TX4-MB), max. 300 mA (others) Between -15 °C and +55 °C at 85% RH max, non-condensing Polyamide, for DIN-rail mount, protection class IP20

Digital In/Out Scale

RS-232C RS-485 Modbus RTU Ethernet TCP/IP Modbus TCP Profibus DP Profinet CANopen

43

TX11 Transmitters Analogue load cell transmitters

Easy Calibration Provides big advantage for heavy capacity tank, silo and hopper scale calibration.

System Integration - 4-20 mA, - 0-10 VDC

TX11 analog load cell transmitters are accurate and reliable instrument, easily integrated into process control systems. By its “digital heart”, TX11 allows easy calibration with programming rotary switches. Signal output is programmable as 4-20 mA or 0-10 VDC. Its high quality analog and digital hardware minimizes long time zero and span drifts.

44

TX11 Specifications

Input & A/D Converter Analogue input range Min. input range Linearity Temperature drift A/D converter Internal resolution Scale Calibration & Analogue Output Calibration D/A Converter External resolution Analogue output Load Cells Excitation Number of Load Cells Connection Setup & Communication Front panel Power Power supply Environment and Enclosure Operation Temperature Humidity Enclosure Dimensions

0 mV – 20 mV < 1 mV < % 0.01 < 0.007 % FSR / ºC 24 bit Delta-Sigma ratiometric with integral analog and digital filters 16 000 000 counts Performed with rotary switches on the front of instrument. 16 bit very low drift DAC Analogue output changes up to 65500 steps 4-20 mA or 0-10 VDC 5 VDC Up to 4 units of 350 Ω or 12 units of 1100 Ω (min 85 ohm - max 1200 ohm ) 4 wire technique. 3 x status LED, 2 x rotary switches 12 - 28 VDC, max. 0.2 A

Between -15 °C and +55 °C At 85% RH max, non-condensing. Polyamide, for DIN-rail mount, IP20 Front width: 22,5 mm, Front length: 99 mm, Height: 114,5 mm

4 - 20 mA 0 - 10 VDC

Tank weighing

Tensile and compressive tests

Strength measurement

45

Process control applications

TX12 Transmitters Smart Analogue load cell transmitters

eCal - Electronic calibration • Calibration without using test size weights via RS-232C port by xFace PC software. • Provides big advantage for heavy capacity tank, silo and hopper scale calibration. • Fast zero and span adjustment

TX12 analog load cell transmitters are accurate and reliable instrument, easily integrated into process control systems.

System integration • 4-20 mA, 0-20 mA, 0-10 VDC or 0-5 VDC selectable signal output • 2 set point outputs programmable via xFace software.

TX12 is having with RS-232C and parallel outputs. TX12 can be electronically calibrated without test weights via RS-232C by xFace PC software.

By its “digital heart”, TX12 allows easy calibration with programming rotary switches. Signal output is programmable as 4-20 mA, 0-20 mA, 0-10 VDC or 0-5 VDC. Its high quality analog and digital hardware minimizes long time zero and span drifts.

2 cut off outputs of TX12 can be set via programming rotary switches on front of the instrument or via PC software xFace.

46

TX12 Specifications

Input & A/D Converter Analogue input range Min. input range Linearity Temperature drift A/D converter Internal resolution Scale Calibration & Analogue Output Calibration Electronic calibration Fast calibration Digital filter D/A Converter External resolution Analogue output Set points Load Cells Excitation Number of Load Cells Connection Setup & Communication Front panel RS-232C Power Power supply Environment And Enclosure Operation Temperature Humidity Enclosure Dimensions

0 mV – 20 mV < 1 mV < % 0.01 < 0.007 % FSR / ºC 24 bit Delta-Sigma ratiometric with integral analog and digital filters 16 000 000 counts Performed with rotary switches on the front of instrument. With xFace performed via PC without test weights test zero and span adjustment. Yes Yes 3 step adjustable digital adaptive filter via PC. 16 bit very low drift DAC Analogue output changes up to 65500 steps 4-20 mA, 0-20 mA, 0-10 VDC or 0-5 VDC 2 programmable free setpoints, Relay contact: 230 VAC, 0.5 A 5 VDC Up to 4 units of 350 Ω or 12 units of 1100 Ω (min 85 ohm - max 1200 ohm) 4 wire technique. 3 x status LED, 2 x rotary switches for xFace programming via PC. 12 - 28 VDC, max. 0.2 A

Between -15 °C and +55 °C At 85% RH max, non-condensing. Polyamide, for DIN-rail mount, IP20 Front width: 22,5 mm, Front length: 99 mm, Height: 114,5 mm

4 - 20 mA, 0 - 20 mA 0 - 10 VDC, 0 - 5 VDC Set point output 1 Set point output 2

Tank weighing

Tensile and compressive tests

Strength measurement

47

Process control applications

MX08 Multichannel System Digital weight data on to your fieldbus

Features • Communication: RS-232C, RS-485, Ethernet TCP/IP, Profibus, Modbus RTU, Modbus TCP, Profinet, CANopen. • High speed: 800 conv/sec • Anti-vibration filter: Adaptive antivibration active filter for fast and stable reading. • Weighing functions: Taring, zeroing, AZT, power on zero, tare memory at power off, motion detection. • eCal: Electronic calibration without test weights • Software support: Windows based BAYKON xFace software for calibration and setup via PC • Matched production: Direct replacement in Count mode without calibration • Local display: Easy service and local indication in site. • Digital I/O: Digital I/O's directly controlled by central PLC.

MX08 is a multichannel transmitter is designed to integrate analog measuring data of multi weighing, force or torque measuring systems into control PLC/PC in proper digital data format. MX08 family is programmed and calibrated via PC by BAYKON xFACE software. MX08 main advantages are; fast conversion rate, fast response and anti-vibration adaptive digital filter, weighing functions, powerful calibration facilities including calibration without test weights (eCal). Fully matched production provides direct replacement without calibration in Count mode. The maximum configuration is; Gateway, up to 8 Analog Digitizer, 8 Digital I/O units, Local Display unit. DIN rail installation provides easy montage.

48

MX08 Specifications MX08 Series Instruments

A/D Converter Type Conversion rate Minimum input voltage Minimum input sensitivity Analogue input range Linearity Resolution

MX08 -AD : Analog Digitizer unit MX08-EN : Ethernet TCP/IP - Modbus TCP MX08-MB: Modbus RTU Gateway MX08-PB : Profibus Gateway MX08-PN : Profinet Gateway MX08-CO: CANopen Gateway MX08-IO : Digital IO MX08-DP : Display 24 bit Delta-Sigma ratiometric with integral analog and digital filters Up to 800 measurements per second < 1 mV 0.1 µV per interval 0 mV to 18 mV unipolar or -18 mV to 18 mV bipolar Within 0.0015% FS, 2 ppm/°C Internal up to 16 000 000; External up to 100 000 counts in Weighing / Force modes, 1 000 000 counts for unipolar input and for selected range in Count mode and 2 000 000 counts for bipolar input and for selected range in Count mode

Scale Calibration and Functions Calibration Digital filter Weighing functions Load Cell Excitation Number of load cells Connection Communication Serial Interface RS-232C Serial Interface RS-485 (only MX08-MB) Modbus RTU interface (only MX08-MB) Modbus TCP and Ethernet TCP/IP(only MX08-EN) Profibus DP V1 interface (only MX08-PB) Profinet interface (only MX08-PN) CANopen interface (only MX08-CO) Digital Input (only MX08-IO) Digital Output (only MX08-IO) Power Supply and Others Power Supply Enclosure Operation Conditions

By etalon weights: via xFace software or fieldbus eCal : Electronic calibration without etalon weights via xFace Count mode : No calibration. All instruments are adjusted in production for high calibration accuracy 10 step adjustable digital adaptive filter Tare, zero, auto zero tracking, motion detection, auto-zero at power-up 5 VDC, max. 100 mA Up to 6 load cells 350 Ω or 18 load cells 1100 Ω in parallel 4 or 6 wire technique. Cable length 274 m/mm² for 6 wire connection 9600 baud, 8 None 1 1200 to 57600 baud, 7 even/odd, 8 None 1 demand (BSI mode) or Modbus RTU Up to 31 units on the bus, Baudrate up to 57600 10Mbits (half dupplex), galvanically isolated 9,6 kbits/s to 12 Mbits/s automatic 100Mbits (full dupplex), galvanically isolated 10 kbits/s to 1 Mbits/s automatic 4 opto isolated inputs. Communication via Gateway unit. 4 relay contact NO output. 1A@250VAC or 30VDC. Communication via Gateway unit. 11 to 28 VDC, max. 100 mA (MX08 AD), max. 300 mA (others) Between -15 °C and +55 °C at 85% RH max, non-condensing Polyamide, for DIN-rail mount, protection class IP20

Digital In/Out Scale 1

Scale 2

Scale 3

RS-232C RS-485 Modbus RTU Ethernet TCP/IP Modbus TCP Profibus DP Profinet CANopen

Digital In/Out

49

RX... Series Remote Displays For panel and wall installation

BAYKON RX14 / RX14S are industrial type remote displays with aluminum body and stainless steel back panel designed for control panel installations. Their 13,5mm bright LED display provides easy readability from far distance.Their front panel, plastic (RX14) or stainless stell (RX14S) type varies.They have RS-485 or RS-232C standard serial interface. RX57 / RX100 / RX100S have industrial type robust stainless steel housing. They are designed especially for outdoor usage. Bright and high-efficient LED display supported by sun visor provides excellent readability. Big digit height as 57mm and 100mm is available. RX57 / RX100 / RX100S offer various serial data interfaces; RS-232C, RS-485 and 20mA CL ASCII for distances over 300 meters.They are available as an option with BAYKON-BRF1 wireless interface.

Model

RX14

RX14S

RX57

RX100

RX100S

Usage type

Panel

Panel

Wall

Wall

Wall

Display height

13,5 mm

13,5 mm

57 mm

100 mm

100 mm

Display type

Seven segment bright LED

Seven segment bright LED

Seven segment bright Seven segment bright LED LED

High-efficient point LED

Sizes (HxWxD)

50x95x100 mm 1,96x3,75x3,94”

55x99x100 mm 2,16x3,90x3,94”

182x467x70 mm 7,17x18,39x2,76"

200x700x80 mm 7,87x27,56x3,15"

200x700x80mm 7,87x27,56x3,15"

Power supply Housing

11-28 VDC

11-28 VDC

230 VAC

230 VAC

230 VAC or 24 VDC

Stainless stell

Stainless stell

Stainless stell

RS-232C RS-485 20mA CL

Yes Yes No

Yes

Yes

Yes

Yes

Yes No

Yes

Yes

Yes

Yes

Yes

Yes

(Değişiklik hakkı saklıdır. 12 / 2014)

Plastic front and SS back SS front and back panel, aluminum body panel, aluminum body

Junction Boxes Polyester & stainless steel types

BAYKON polyester and stainless steel junction boxes are designed to connect 4 and 8 load cells in parallel including high quality angled clamping terminals for easy cable connection and corner trimming by resistors and/or potentiometers. Optional surge arrestors can be added for weigh bridges and silo scales. Juntion boxes are available with explosion protection according to EEx iaIIC T6 with approved cable glands. Material Stainless steel Stainless steel Polyester Polyester Aluminium Aluminium

Model BKJ-04 BKJ-08 BJ-04 Ex BJ-08 Ex BJ-04A Ex BJ-08A Ex

51

Protection IP66 IP66 IP66, Ex e(ia) IP66, Ex e(ia) IP66, Ex e(ia) IP66, Ex e(ia)

Sizes (mm) 140x140x47 230x180x70 160x75x55 160x160x90 125x75x60 245x80x60

BY-3S / BY-3SL Printers Practical, low cost and reliable

Printing system Printing width Dot density Paper feed pitch Printing speed Printing columns and Character size Line interval Character types Bar code type Interface Input buffer Supply voltage Power consumption Weight Outer dimensions Operating temperature and humidity Storage temperature and humidity Reliability

Emulation

Line thermal dot printing 48 mm (384 dots/line) 8 dots/mm (Wigth, Lenght) 0.125 mm Approx. 11 lines/sec. (At maximum) 32 columns (12 x 24 Font A) 1.25 x 3.00 mm 42 columns (9 x 24 Font B) 0.88 x 1.92 mm Initial value: 4.23 mm (1/6 inch) Can be set with a command (1/360 inch at minimum) Alphanumeric characters, symbols, international characters UPC-A/E, JAN (EAN) 13-/8-column, ITF, CODE 39, CODE 128, CODABAR, PDF 417 Serial (RS-232c) 2 KB 100 ~ 240 V 50/60 Hz At non-printing: Approx. 2 W At printing: Approx. 15 W (approx. 20 W at maximum) Main bodi: Approx. 750 g (Paper roll exculded) AC adapter: Approx. 350 g 106 (W) x 183 (D) x 126 (H) mm 5 ~ 40˚C, 35 ~ 85% RH (No dew condenstation) -20 ~ 60˚C, 10 ~ 90% RH (No dew condenstation) Printing head life: (25˚C) Pulse resistance: 50 million pulses or more (Print rate 12.5%) Wear resistance: 50 kg or more (With recommended) Thermal paper at normal temperature and humidity) ESC/POS (BY-3S) Label Printing, ELTRON compatible (ELP-2), label lenght 100 mm max (BY-3SL)

52

BRF1 Serial RF Modem Two way wireless applications

• • • • • • • • • •

53

Specially designed for BAYKON weighing devices 868 Mhz 40 Channel RS232 serial 1200 ...19200 baud rate 3 way serial microcontroller interface Transmission distance up to 100 meters (in open areas) 7 – 15 VDC power input -10 to 50 °C operating temperature Power consumption < 60 mA Optional two way one input / output control Optional second RS232 port

HEAD OFFICE

Kimya Sanayicileri O.S.B. Organik Cad. No: 31 Tepeören 34956 Tuzla / İstanbul / TURKEY T. +90 216 593 26 30 • F. +90 216 593 26 38 [email protected] WEST ANATOLIA

Atatürk O.S.B. 10024. Sok. No: 3 35610 Çiğli / İzmir / TURKEY T. +90 232 469 97 91 • F. +90 232 469 97 94 [email protected] SOUTH ANATOLIA

Kiremithane Mah. 4406 Sok. Muzeyyen Boro İş Hanı No: 9 K: 3 D: 24 33010 Mersin / TURKEY T. +90 324 238 24 36 • F. +90 324 233 23 08 [email protected]