Data Sheet DS/FIM/COMPONENTS-EN Rev. A
Industrial tablet PC, modem and accessories Field Device Management Tools
Highly flexible industrial tablet PC for harsh environments Measurement made easy
Install and run FIM-ABB Field Information Manager and other ABB software on a rugged tablet
Integrated Bluetooth 4.0, WLAN and optional LTE radio module and HART modem
Brilliant, high-resolution, bonded 10.1 touch LED display, also sunlight readable
Data capture with barcode and RFID scanner
Powerful Quad-Core processor for high working speed and long battery life
Freely configurable expansion interface for customer specific charging Extensive accessories
Rugged design for industrial use, including hazardous area
Change from one to two columns
Industrial tablet PC, modem and accessories Field Device Management Tools
Agile X 10.1" Tablet PC
Camera — 5 MP Auto-Focus Camera with LED Flash on rear — 2 MP Camera on front Network specifications Wireless LAN
IEEE 802.11 a/b/g/n
Bluetooth
Bluetooth 4.0 (Class I)
GPS
u-Blox Neo-6Q, up to 2.5 m accuracy
Optional LTE Module
EU: LTE, HSPA+, GSM/GPRS USA: LTE, HSPA+, GSM/GPRS/EDGE, EV-DO Rev. A, 1 x RTT
RFID support
M11117
Fig. 1:
Agile X 10.1" Tablet PC
Specifications CPU Intel BayTrail-M Quad-Core 1.8 GHz (turbo frequency up to 2.2 GHz) Memory System Memory: 8 GB SODIMM DDR3L-1600 Storage: 128 GB mSATA MLC SSD Operating system Windows 10 Professional (Service Pack 1 - 64 bit)
Internal RFID HF Reader (13.45 MHz)
Interface Under protective cover - for use only in safe area — 1 x Micro HDMI — 1 x 30-pin Combo Conn. (Giga-LAN or RS232) — 1 x USB 3.0 — 1 x Audio Combo Conn. (Mic in/Line Out) — 1 x Power Jack (DC) — 1 x Micro SD Slot Power supply Input voltage
12 ... 19 V DC
Adapter
100 ... 240 V AC, 50 ... 60 Hz / 19 V DC
Battery
Standard: Up to 6 h run time, 7.4 V, min. 5300 mAh Extended: up to 13 h run time, 7.4 V,
Display
min. 10,600 mAh
Size
10.1"
Resolution
1920 x 1200 pixel
Brightness
700 nits
Contrast Ratio
800:1
Touch
Projective Capacitive Touch (min. 4 points)
Front glass
Gorilla glass, 3 mm with hardness of 8H
Dimensions WxLxH
271.8 x 197.2 x 9 mm (10.7 x 7.76 x 0.75 inch)
Weight
1.5 kg (3.3 lb) with standard battery
Ambient conditions Audio 1 x Built-in Mic, 2 x 1 W Speaker Sensors Light sensor, G sensor, Gyrometer, E-compass
Shock resistance
Military grade device (MIL-STD-810G)
IP rating
IP 65 (IEC 60529)
Storage temperature
-30 ... 70 °C (-22 ... 158 °F)
Humidity
30 ... 90 % (non-condensing)
Change from two to one column
2 DS/FIM/COMPONENTS-EN Rev. A | Device Management, Fieldbus and Wireless
1
2
3
u
4
t
5 p q
r s
6 7
8 9
o
nm l
k
j M11118
Fig. 2: Overview 1 I/O ports 2 Volume buttons 3 Function button 4 Internal RFID reader 5 Expansion port 6 Rear camera 7 Battery 8 Barcode scanner 9 Strap fixture j Tool-less battery hot swap k Stylus l Power button m Home button n Function button o Touch screen p Microphone q Front camera r Light sensor s Indicators t LTE module / SIM card slot u Speaker Change from one to two columns
Ex-marking
Ordering information
Ex marking - zone 2
Model
Bartec order number
ATEX
II 3G Ex ic IIA/IIC T5 Gc
Agile X 10'1 Tablet PC,
G7-A031-4051/11110000
II 3D Ex ic IIIB T90 °C Dc IP 54
non Ex, 5.3 Ah
(IIA when using hand strap Type 03-9849-0130)
Agile X 10'1 Tablet PC,
Ex certification: EPS 15 ATEX 1 823 X
Ex Zone 2, 5.3 Ah Agile X 10'1 Tablet PC,
IECEx
Ex ic IIA/IIC T5 Gc
B7-A234-4051/11110000 B7-A234-4011/11120000
EX Zone 2, 10.6 Ah
Ex ic IIIB T90 °C Dc IP 54 (IIA when using hand strap Type 03-9849-0130) Ex certification: IECEx EPS 15.0010X UL
Class I Div. 2 Groups A, B, C, D T4 A Ex certification: UL File E321557
Device Management, Fieldbus and Wireless | DS/FIM/COMPONENTS-EN Rev. A 3
Industrial tablet PC, modem and accessories Field Device Management Tools
HART add-on module
Electrical data HART interface UI: ≥ 30 V DC, II: ≥ 130 mA, PI: ≥ 1 W, UO: ≥ 3 V DC, IO: ≥ 10 mA, PO:≥ 5 mW, Um: 60 V DC Maximum cable length: 1.8 m (5.9 ft)
1
Explosion protection Ex marking - zone 2 ATEX
II 3G Ex ic [ia Ga] IIC T4 Gc II 3D Ex ic [ia Da] IIIB T135 °C Dc Ex certification: EPS 15 ATEX 1 823 X
1 2
IECEx
Ex ic [ia Ga] IIC T4 Gc Ex ic [ia Da] IIIB T135 °C Dc4 Ex certification: IECEx EPS 15.0010X
NEC
Class I Division 2 Groups A, B, C and D Ex certification: UL File E321557
3 Ex marking - Tablet in non Ex areas M11119
ATEX
Ex certification: EPS 15 ATEX 1 069 X
Fig. 3: HART Add-on module 1 Add-on module 2 Test probes 3 Test leads IECEx
The HART add-on module is a new extension module for Agile X and offers a HART modem function. It may be connected to a HART loop as secondary master and facilitates applications such as configuring the HART devices. Due to the Windows operating system, the user can deploy many current software solutions in particular FDI based Field Information Manager by ABB and other software to make measurement easy. Agile X equipped with HART add-on module is the new safe solution when working in the Ex and in the non-Ex area: Parameterization, configuration, measurement and office tasks can be carried out much easier, faster and more safely.
II (2)G [ia Ga] IIC
[Ex ia] IIC Ga Ex certification: IECEx EPS 15.0065X
NEC
Use with intrinsically safe outputs in non-Ex areas
Ordering information Model
Bartec order number
Non Ex for Agile X
G7-A0Z0-0007
Ex Zone 2 for Agile X
B7-A2Z0-0033
Features — Integrated HART modem function on an industry tablet PC. — Supports FDI technology for easy field device management. — Mixed operation between Ex and non-Ex area possible.
4 DS/FIM/COMPONENTS-EN Rev. A | Device Management, Fieldbus and Wireless
Change from two to one column
Accessories Power supply Li-Polymer battery
Description
Type
Order number
Maximum use is 1 battery per Tablet PC
7.4 V / 5300 mAh
B7-A2Z0-0028
Change battery only in non-Ex area
(39.22 Whr) 7.4 V / 10600 mAh
Ex Certification:
B7-A2Z0-0029
(78.44 Whr)
ATEX Zone 2 / 22 IECEx Zone 2 / 22 UL Class I Division 2 M11120
Battery lock for Agile X (Ex)
Description
Type
Order number
Allows to prevent the accidental un-locking and remove of
Battery lock
03-9827-0004
Description
Type
Order number
1 Charging power supply
Charging Power
03-9911-0040
For non-hazardous area.
Supply
the battery. Ex Certification: ATEX Zone 2 / 22 IECEx Zone 2 / 22
M11134
UL Class I Division 2 Charging power supply for Agile X
Input voltage: 100 ... 240 V AC
1
Output voltage: 19 V DC, 3,42 A 2
Available with correct line cord for EU, UK, US and other. Country specific AC-line cord 2 must be ordered separately.
M11121
Vehicle charging cable for Agile X
2 Country specific AC-line cord
Version EU
03-9609-0022
For non-hazardous area.
Version US
03-9609-0023
AC Line cord - 3 wired with IEC 320-C5 connector.
Version UK
03-9609-0024
Description
Type
Order number
For non-hazardous area.
Vehicle charging
03-9914-0011
Input voltage: 11 ... 16 V DC and 22 ... 32 V DC
cable
Output voltage: DC 19 V (±5%), 3.42 A Operating temperature: 0 ... 40 °C (32 ... 104 °F)
M11122
Device Management, Fieldbus and Wireless | DS/FIM/COMPONENTS-EN Rev. A 5
Industrial tablet PC, modem and accessories Field Device Management Tools
Docking stations Desktop docking station for Agile X
Description
Type
Order number
For non-hazardous area.
Desktop docking
03-9915-0017
Input voltage: 12 V DC, optional 9 ... 36 V DC
station
Charging of the Agile X with inserted battery Interfaces: 4 x USB 2.0, 1 x RS232, 1 x Ethernet 10/100 Mbit/s, 1 x VGA Useable with standard and extended battery. Further required components, must be ordered separately: — Charging power Supply: 03-9911-0040 M11123
Vehicle docking station for Agile X
— Country-specific AC-line cord
Description
Type
Order number
For non-hazardous area.
Vehicle docking
03-9915-0019
Input: 9 ... 36 V DC
station
Charging of the Agile X with inserted battery. Interfaces: 2 x USB 2.0, 1 x RS232 1 x Ethernet 10/100 Mbit/s 1 x SMA for external GPS antenna Useable with standard and extended battery. Further required components, must be ordered separately: Vehicle charging cable: 03-9914-0011 M11124
Table-top charger dual for Agile X
Description
Type
Order number
For non-hazardous area
Table-top charger
03-9914-0010
Input voltage: 10 ... 20 V DC (50 W)
dual
Two slot charging dock. Power level LED indicators. Buzzer to indicate battery is inserted. Supports up to 2 set of dock interconnected. Scope of Delivery: — Charging Power Supply: 03-9911-0040 M11125
— AC-line cord (EU): 03-9609-0022 — AC-line cord (US): 03-9609-0023 Information: Other AC line cord must order separately.
6 DS/FIM/COMPONENTS-EN Rev. A | Device Management, Fieldbus and Wireless
Adapter cable LAN-Adapter for Agile X
Description
Type
Order number
For non-hazardous area.
LAN-Adapter
03-9919-0022
Description
Type
Order number
For non-hazardous area.
RS232 cable
03-9919-0023
Description
Type
Order number
For non-hazardous area.
Micro HDMI cable
03-9919-0024
Description
Type
Order number
Ex certification:
LTE radio module
03-9826-0128
ATEX Zone 2 / 22
EU
For LAN from 30 pin extension port. Connector: RJ45, female.
M11126
RS232 cable for Agile X
For RS232 from 30 pin extension port. DB9 Serial RS232 Cable, Male.
M11127
Micro HDMI cable for Agile X
Micro HDMI (Male) to HDMI (Male).
M11128
Radio modules LTE radio modules for Agile X
IECEx Zone 2 / 22 UL Class I Divison 2
M11129
4G / LTE Sierra MC7305-EU (Gobi5000) LTE, HSPA+, GSM / GPRS Ex certification:
LTE radio module
ATEX Zone 2 / 22
US
03-9826-0127
IECEx Zone 2 / 22 UL Class I Divison 2
M11130
4G / LTE Sierra MC7355-US (Gobi5000) LTE, HSPA+, GSM / GPRS / EDGE, EV-DO Rev. A,1 x RTT
Device Management, Fieldbus and Wireless | DS/FIM/COMPONENTS-EN Rev. A 7
Industrial tablet PC, modem and accessories Field Device Management Tools
Additional accessories Shoulder strap for Agile X (Ex)
Description
Type
Order number
Ex certification
Shoulder strap
03-9849-0132
Description
Type
Order number
Ex certification
Hand strap
03-9849-0130
Description
Type
Order number
Ex certification
Stylus
03-9849-0131
Description
Type
Order number
Ex certification
Screen protector
B7-A2Z0-0031
ATEX Zone 2 / 22 IECEx Zone 2 / 22 UL Class I Divison 2 M11131
Only suited for gas group IIA — Allows ergonomic carrying. — Shoulder Strap with Pad. — Strap length adjustable.
Hand strap for Agile X (Ex)
ATEX Zone 2 / 22 IECEx Zone 2 / 22 UL Class I Divison 2 Only suited for gas group IIA — 1 pcs per package — To be mounted on the back side
M11132
Spare stylus for Agile X (Ex)
ATEX Zone 2 / 22 IECEx Zone 2 / 22 UL Class I Divison 2 M11133
— 1 pcs per package — With tether — Suitable for capacitive Touch Screen — With anti-scratch rubber tip Screen Protector for Agile X (Ex) —
ATEX Zone 2 / 22 IECEx Zone 2 / 22 UL Class I Divison 2 For gas group IIA, IIB and IIC — 5 pcs per package — 10,1'' Widescreen
8 DS/FIM/COMPONENTS-EN Rev. A | Device Management, Fieldbus and Wireless
Notes
Notes
Device Management, Fieldbus and Wireless | DS/FIM/COMPONENTS-EN Rev. A 9
Notes
Notes
10 DS/FIM/COMPONENTS-EN Rev. A | Device Management, Fieldbus and Wireless
Notes
Notes
Notes
Notes
Device Management, Fieldbus and Wireless | DS/FIM/COMPONENTS-EN Rev. A 11
To find your local ABB contact visit: www.abb.com/contacts For more product information visit: www.abb.com/measurement
Note We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents – in whole or in parts – is forbidden without prior written consent of ABB. Copyright© 2016 ABB All rights reserved 3KXD152901R1001
DS/FIM/COMPONENTS-EN Rev. A 11.2016
Contact us