Industrial Managed Ethernet Switch
EL228 The Sixnet EL228 is a 28 port (24 + 4G) managed industrial Ethernet switch designed to meet the extreme requirements of power substations, traffic control, railway and other harsh environments. It combines the high performance and security of an enterprise-class switch with rugged packaging and protected circuitry to meet the needs of the most demanding applications. 24 fast Ethernet SFP ports for fiber or copper links can be mixed and matched on the fly to provide the ultimate in port flexibility. Sixnet’s universal mounting features LEDs, power/ground connections, console ports and bracket positions on both the front and back of the switch simplify ordering and deployment. By combining all of these features in one hardened package, the EL228 provides users with the lowest total cost of ownership of any industrial Ethernet switch in its class.
Technical Details Ethernet Type
Managed
10/100 Ethernet
Up to 24 (SFP)
100 Fiber
Up to 26 (SFP)
Gigabit Ethernet
4
Gigabit Fiber
Up to 2 (SFP)
Ethernet Ports
28
Gigabit Ports
4 (2 Gigabit Ethernet (10/100/1000) RJ45 Ports and 2 RJ45/SFP Combo Ports)
Ethernet isolation
1500 Vrms 1 minute
SFP Ports
24 SFP-Ports for a mix of copper or fiber SFP-modules
RJ-45-Ports
Auto-negotiation (speed/duplex) and auto-crossover
Switching Capacity
12,8 Gbit/s
Forwarding Rate
9,5 Mbit/s
Jumbo-Frame
10K on Gigabit-Ports
Other functions
Store & Forward, Wire-Speed-Switching, Non-Blocking
1
Industrial Managed Ethernet Switch
Technical Details Switching Features Flow Control
IEEE 802.3x (Full Duplex) and Back-Pressure (Half Duplex)
Spanning Tree Protocol IEEE 802.1D, plus
• IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) • IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) • BPDU forwarding and filtering
Real-Time-Ring
for high-speed, fault-tolerant rings • Link loss recovery: 50ms/hop
VLAN (Virtual Local Area Networks)
• 802.1Q tag-based with 256 VLANs and 4K VLAN ID • 802.1v protocol and port-based VLAN • Voice and Private VLAN • GVRP and Q-in-Q (double tagging)
Rate Limiting
Ingress and Egress • 64 Kbit/s to 100/1000 Mbit/s • Class of Service (CoS) per Port
Quality of Service with 4 Priority-Queues
• Scheduling schemes: WRR and Strict priority • CoS per IEEE 802.1p and IP DSCP-based • DiffServ (DS): ingress, egress and remarking
IEEE 802.1ab Link Layer Discovery
LLDP
Multicast VLAN Registration
MVR
Link Aggregation Control Protocol IEEE 802.3ad
• Static trunk (8 trunks and up to 8 ports per trunk) • Traffic load balancing
IGMP (Internet Group Management Protocol)
• IGMP v1, v2 and v3 with up to 255 multicast groups • IGMP snooping and querying • Immediate leave and leave proxy • Throttling and filtering
Protocols
• PROFINET • Ethernet/IP
Security HTTPS / SSL
for secure Web access
SSH v1.5/2.0
for secure Telnet access
SNMPv3 authentication and encryption
Yes
Username and password authentication
Yes
Management access filtering
Yes
Access Control List
• IP and MAC-based • VLAN and TCP/UDP port
Storm Control
for broadcast and multicast messages
RADIUS and TACACS + AAA
• Authentication, Accounting and Authorization • 5 servers for RADIUS, 1 server for TACACS+ • Encryption: MD5, TLS, TTLS, TACACS+ AAA/3.0
Enable/disable ports
Yes
Port security
MAC-based - static and dynamic
IP Source Guard
Yes
IEEE 802.1X Network Access Control
• Port-based with single or multiple host mode • Authentication: EAP-MD5, PEAP, TLS, TTLS • MAC and web authentication • Guest VLAN and Auto VLAN assignment
2
Industrial Managed Ethernet Switch
Technical Details Management & Monitoring Banner commands
Yes
Port mirroring
Yes
Event/Error/System log
• Local flash • Remote server via system log (Syslog RFC 3164) • SMTP (RFC 821) email alarming
Network Time Protocol
for time synchronization, SNTP (RFC 2030) and NTP (RFC 1305)
DNS (Domain Name Server)-Client
Yes
Universal Plug and Play (UPnP)
Yes
IEEE 802.3ah OAM
Operational Administration Maintenance
Software upgrade via TFTP
Yes
IP Address assignment
Static, DHCP and BOOTP
CLI (Command Line Interface)
via console or Telnet
Web-Interface
HTTP / HTTPS / SSL
SNMP v1, v2, v3
Simple Network Management Protocol
SNMP Traps for event notification
Yes
RMON I (Remote Monitoring)
Groups 1, 2, 3 and 9
sFlow
Network-wide traffic monitoring
Dual firmware update system
Yes
Configuration
Download and upload
Alarm output
form -C relay (NO and NC contacts) • Max. voltage: 250 V AC, 30 V DC • Max. current: 2A @ 30 V DC oder 250 V AC
Power consumption
60 Watt typ. with all ports linked
Power supply
Dual-redundant internal power input option
Protection
Current overload and reverse polarity
Connection
10-pole screw block can be positioned in front or back
Power input options
• EL228-A0: 85 ~ 264 V AC or 90 ~ 300 V DC (single input) • EL228-AA: 85 ~ 264 V AC or 90 ~ 300 V DC (dual input) • EL228-D0: ± 18 ~ 75 V DC (single input) • EL228-DD: ± 18 ~ 75 V DC (dual input)
Power Input and Alarm Output
3
Industrial Managed Ethernet Switch
Technical Details Environmental Operating temperature
-40 ~ +85 °C per IEC 60068-2-1 / 2
Humidity
5 to 95% RH (non-condensing) per IEC 60068-2-30
Vibration
2g @ 9-200Hz & 7.5mm, 2-9Hz per IEC60068-2-6
Seismic
2g, 9-35Hz & 7.5mm, 1-9Hz per IEC60255-21-3
Standards and Compliance Dielectric and Impulse
IEC60255-5 & C37.90
MTBF
>200,000 hours GB @ 40°C per MIL-HNDBK-217F2
EMC
IEEE c37.90.1/2/3, IEC61000-6-2, IEC61000-6-4, IEC/TS61000-6-5, IEC60870-2-1, IEC61000-4 Series, FCC Part 15, EN55022/CISPR22, CE
Hazardous Locations
UL1604 / CSA C22.2/213 / ISA12.12 (Class I, Div 2); EN60079-15 (Zone 2, Cat 3), ATEX, CE
Traffic Control
NEMA TS-2
Railway Systems
EN50155 & EN50121-4
Power Systems
IEC61850-3, IEC60870-2-1/2; IEEE1613, KEMA tested and approved
Safety
UL508 / CSA C22.2/14 (pending); EN60950-1, CE
Others
RoHS, WEEE and REACH compliant
Housing Dimensions (HxWxD)
45 x 493 x 305 mm
Material
Heavy-gauge corrosion-resistant metal enclosure
Weight
4,3 kg (typical)
Mounting
Front or rear/reverse wiring with power in front or back • 1U rack mount (19” brackets included) • Optional 23”, 24”, EIA, WECO, ETSI and wall brackets available
Protectionclass
IP50 sealed from dust and contaminants
Warranty Warranty
5 years on design and manufacturing defects
4
Industrial Managed Ethernet Switch
Comparison chart EL228 Power input
Typ
Ports (all)
10/100 Ethernet
100 Fiber
10/100/1000
Gig Fiber
EL228-A0-1
single universal V AC / V DC
Managed
28
up to 24
up to 26
4
up to 2
EL228-AA-1
dual universal V AC / V DC
Managed
28
up to 24
up to 26
4
up to 2
EL228-D0-1
single 24/48/60 V DC
Managed
28
up to 24
up to 26
4
up to 2
EL228-DD-1
dual 24/48/60 V DC
Managed
28
up to 24
up to 26
4
up to 2
Produkt
Accessories Accessories
Description
EK1-BRCKT-19
Set (2) of 1U 19” brackets (one set included with each switch)
EK1-BRCKT-23
Set (2) of 1U 23” EIA/WECO
EK1-BRCKT-2324
Set (2) of 1U 23/24” EIA/WECO
EK1-BRCKT-ETSI
Set (2) of 1U 536 mm ETSI brackets
EK1-BRCKT-WALL
Set (2) of wall brackets
SFP-Modules SFP stands for Small Form-factor Pluggable. These are small, standardized modules for network connections. The transceivers are available in both optical as well as electric versions. The replacement of the modules is quick and simple, so efficient Ethernet switches can be adapted for new tasks.
Product FCOPPER-SFP-100 FMFIBER-SFP-4K
Speed
Type
Distance
Port Compatibility
10/100 Mbit/s
Cooper RJ45
100 m
Ports 1 thru 24
100 Mbit/s
Multimode
4 km
Ports 1 thru 26
FSFIBER-SFP-30K
100 Mbit/s
Singlemode
30 km
Ports 1 thru 26
FSFIBER-SFP-60K
100 Mbit/s
Singlemode
60 km
Ports 1 thru 26
FSFIBER-SFP-100
100 Mbit/s
Singlemode
100 km
Ports 1 thru 26
GMFIBER-SFP-500
Gigabit
Multimode
550 m
Ports 25 and 26
GMFIBER-SFP-2K
Gigabit
Multimode
2 km
Ports 25 and 26
GSFIBER-SFP-10K
Gigabit
Singlemode
10 km
Ports 25 and 26
GSFIBER-SFP-30K
Gigabit
Singlemode
30 km
Ports 25 and 26
GSFIBER-SFP-50K
Gigabit
Singlemode
50 km
Ports 25 and 26
GSFIBER-SFP-80K
Gigabit
Singlemode
80 km
Ports 25 and 26
5
Industrial Managed Ethernet Switch
Pin arrangement Console Port DB9 - DB9
DB9 female 5
DB9 female
9
1 6
6
1 CD in 2 RD in 3 TD out 4 DTR out 5 GND 6 DSR in 7 RTS out 8 CTS in 9 RI in
1 9 5
Power Wiring for EL228 Switches Pluggable Screw Block 1
2
3
4
5
6
7
8
9
10
Accepts 14-24 AWG Wire
P1 +/L
P1 -/N
P2 -/N
Power Input 1
Chassis GND
P2 +/L Power Input 2
Alarm Wiring for EL228 Switches Pluggable Screw Block 1
2
3
4
5
6
7
8
9
10 Accepts 14-24 AWG Wire
Alarm Relay
NO
6
C
NC
Industrial Managed Ethernet Switch
Dimensions (mm) 17.30" [439.4]
Wall Mounting Brackets (optional) can be mounted in corners or centered
1.75"
17.50" [444.5] 0.76" [19.3]
0.55" [14.0] 2.25" [57.2]
0.45" [11.4]
0.25"
1.85"
[6.4]
[47.0]
1.00" 0.25"
[304.8]
0.50" [12.7]
[25.4]
12.00"
1U
[44.5]
Console port
Sixnet EL228 Series Industrial Ethernet Rack Switch
7.50" [190.5] 7.00" 3.25" [177.8] [82.5] 3.75" [95.2]
8.65" [219.7] 8.15" [207.0] 4.90" [124.5] 4.40" [111.8]
8.65" [219.7]
7.50" [190.5]
[6.4]
8.15" [207.0]
7.00"
Dimensions: Inches [mm]
[177.8] 4.90"
3.75" [95.2] Console port
[124.5] 4.40" [111.8]
3.25" [82.5]
0.50" [12.7] typ. for SFP fiber 1.0" [25.4] typ. for SFP copper RJ45
0.76" [19.3] With 19" Brackets (2 included) (Universal EIA/WECO/ETSI mounting holes)
0.50" [12.7]
18.90"
Many Mounting Bracket Positions
[480.1] 1.25" [31.8]
1.00" [25.4]
18.32" [465.3] 21.00" [533.4]
EIA
1.25" [31.8]
With ETSI (21" nominal) Brackets (optional) (Universal ETSI/EIA/WECO mounting holes)
0.98" [24.9]
ETSI or WECO
20.27" [514.9]
WECO or ETSI
22.90" [581.7]
1.00" [25.4]
With 23" Brackets (optional) (Universal EiA/WECO/ETSI mounting holes)
1.25" [31.8]
EIA
22.32"
WECO or ETSI
23.90" [607.1]
1.00" [25.4]
With 23/24" Brackets (optional) (Universal EiA/WECO/ETSI mounting holes) 22.32" [566.9] 23.32" [592.3]
Zum Hagenbach 7 • D-48366 Laer www.welotec.com •
[email protected] Fon: +49 (0)2554/9130-00 • Fax: +49 (0)2554/9130-10 Welotec is using a ISO 9001:2008 certified quality management system • All specifications are subject to change
7
1.25" [31.8]
EIA
WEL-EL228-V1-EN ed. 05/12 Welotec GmbH
[566.9]