INDUSTRIAL Catalog
www.huskieindustrialtools.com 1-800-860-6170
1
Distributed by:
Table of Contents TREC-3140 and TREC-5430 TS-16 and TREC-S20 TS-24 and TREC-S524H TS-24CC TREC-13 and TREC-16 TPL-S20 TREC-P500 TREC-P1 TECO-LK TMSH-65 TBP-80 TCH-80 and TCH-80DC TCH-86 THK-70 TEP-410 TEP-410H Wire Rope Dies TPG-1 and TPG-4 TS-Series TSP-Series THP-700 TFP-700 TR-14EF TR-14EA TGHP-5 TSH-70M TURH-14 TFS-14 TNC-Series TSC-Series THF
12 Ton Battery Powered Compression Tools 4.4 Ton Manual Cutter and 6.6 Ton Battery Powered Cutter 8 Ton Manual Cutter and 8 Ton Battery Powered Cutter 8 Ton Manual Cutter 6 Ton and 12 Ton Battery Powered Cutters Underwater Hydraulic Cutter Battery Powered Light Duty Pump Battery Powered Pump Battery Powered Mesh/Bar Cutter and Rebar Bender Heavy Duty Wire Rope, Bar and Bolt Cutter Lithium-Ion Battery Lithium-Ion Battery Charger AC and DC Six Bay Lithium-Ion Battery Charger AC Battery 12 Ton Compression Tool 12 Ton Remote Compression C-Head 12 Ton “U” Type Compression Dies Gauges Handheld Hydraulic Cutters Hydraulic Operated Remote Cutting Heads 10,000 psi Hydraulic Hand Pump 10,000 psi Hydraulic Foot Pump 1/2 HP, 10,000 psi Hydraulic Pump 3/4 HP, 10,00 psi Single Acting Hydraulic Pump 5 HP, Gas Engine 10,000 psi Hydraulic Pump 35 Ton Hydraulic Steel Pump Remote Control Handle Foot Switch 10,000 psi High Pressure Hydraulic Hose 10,000 psi High Pressure Flush Face Couplers Hydraulic Oil www.huskieindustrialtools.com 1-800-860-6170
5 6 7 8 9 10 11 12 13 13 14 14 15 15 16 16 17 18 20-21 22-23 24 24 25 25 26 27 28 28 29 30 30 3
The Huskie Quality Advantage WARRANTY
REPAIR AND WARRANTY CLAIMS
Battery Tools . ............... 2 Years Battery........................... 5 Years Hydraulic Tools.............. 5 years
SAFE
Hydraulic tools eliminate many risks of injury that are associated with conventional tools. The hydraulic mechanism does the work so there is little risk of continual strain on one muscle or group of muscles that could lead to injuries, lot time from work, or costly medical treatment.
All claims must be sent to Huskie for inspection and authorization. Before shipping tools to Huskie, A Repair Goods Authorization is required. Secure the authorization online, by telephone or write to Huskie’s main office with details of claim. Non-warranty repairs are handle using the same procedure. Repairs exceeding 50% of the cost of a new tool will be advised before repairs are made.
CONTACT US
Contact us by phone, fax or e-mail. Phone: 1-800-860-6170 FAX: 1-800-345-3767 E-mail:
[email protected]
Order Data To Order: Call 1-800-860-6170 FAX: 800-345-3767
All Standard Battery Operated Tools Include 1 Battery Powered Tool 1 Carrying Case 1 TCH-80 Battery Charger 2 TBP-80 Lithium Ion Batteries 1 Carrying Strap
All Kits can be custom ordered to include optional batteries and/ or chargers by adding the following suffixes to the standard kits listed below:
DC Includes 1 TCH-80DC 12 V DC Charger
X Includes Tool and Case Only
Prices vary based on which kit is ordered.
Battery and Chargers TBP-80
Lithium Ion Battery
TCH-80
Lithium Ion, Tri-Chemistry Charger (AC) Standard with kit
TCH-80DC
Lithium Ion, Tri-Chemistry Charger (12V DC)
TCH-86
Six Bay Charger (Chargers NOT included)
4
www.huskieindustrialtools.com 1-800-860-6170
12 Ton Battery Powered Compression Tools Model TREC-3410 and TREC-5430
Specifications for the TREC-3410
Output Weight Size Jaw Opening
12 Ton 19 lbs. with Battery 18”L x 10.5”H x 3.5”W 1”
Specifications for the TREC-5430
Output Weight Size Jaw Opening
12 Ton 14.75 lbs. with Battery 15.5”L x 12”H x 3”W 1-3/16”
Wire Rope Crimping Dies (Set of 7) Die # Wire Sleeve # Rope Size Aluminum 316 AC 3/16” A3 14 AC 1/4” A4
516 AC 38 AC 716A 12C 716 C 12 A
5/16” 3/8” 7/16” 7/16” 1/2”
A5 A6 A7
Sleeve # Copper C3 C4
C5 C6 C8 C7
A8
Features • Rotational Head • Rapid Advance • Ergonomically Balanced • Weather Resistant Housing • Audible Bypass when Predetermined Pressure is Achieved • Includes TDIE-CASE* • Protective Rubber Boot on “C” Head *Die case NOT included with TREC-5430.
Huskie is giving you more tool speed and easier handling with our battery powered compression tool.
TREC-3410
The TREC-5430 pistol grip tool weighs just 14.75 pounds and was specifically designed for use in single-handed operation.
Manual & Battery Operated Hydraulic Tools
www.huskieindustrialtools.com 1-800-860-6170
5
4.4 Ton Manual Cutter and 6.6 Ton Battery Powered Cutter Models TS-16 and TREC-S20
Manual
Specifications for TS-16
Output Weight Size Jaw Opening
4.4 Ton 6 lbs. 15”L .6”
Battery Powered Specifications for TREC-S20
Output Weight Size Jaw Opening
6.6 Ton 9.5 lbs. with Battery 12”L x 12”H x 2.5”W .75”
Cutting Capacities
Wire Rope Rebar (Sc 40) Rebar (Sc 60) Ground Rod Guy Wire
5/8” 1/2”, #4 3/8”, #3 1/2” 3/8”
Bridge Strand
Do Not Cut
For Wire Rope
Features • Flip-Top Latching Head • One Hand Operation • Rotational Head • Rapid Advance • Ergonomically Balanced • Ergonomic Pistol Grip Handle • Weather Resistant Housing • Overload Bypass Protection
Make Clean Cuts
Due to material composition, the ratings are to be used as a guide. Actual capacity may vary due to “bypass” feature.
Replacement Blade for TS-16 Replacement Blade for TRECS20
20-07 20-07
The TREC-S20 was designed to cut the toughest steel used in construction today. It can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaws, acetylene torches and cable cutters. With the pull of a trigger, you can cut wire rope up to 5/8”, standard guy wires to 3/8”, and rebar to 1/2”. The specially designed flip-top latch and rotating head provide exceptional ease of use and maneuverability in tight working quarters. The TREC-S20 has an overload bypass that will “kick out” when the tool reaches 6.6 tons or is attempting to cut cables beyond its capacities.
NOTE: DO NOT CUT BRIDGE STRAND OR CASE HARDENED STEEL RODS. SEE TS-24CC, TSP-24CC, TS-32CC OR TSP-32CC1.
6
www.huskieindustrialtools.com 1-800-860-6170
Manual & Battery Operated Hydraulic Tools
8 Ton Manual Cutter and 8 Ton Battery Powered Cutter Models TS-24 and TREC-S524H
For Wire Rope and Bar
Manual
Specifications for TS-24
Output Weight Size Jaw Opening Cutting Capacities Wire Rope
Rebar Bridge Strand
8 Ton 9 lbs. 17”L .9” 3/4” 5/8” 1/2”
Battery Powered Specifications for TREC-S524H
Output Weight Size Jaw Opening Cutting Capacities Wire Rope
Rebar (Sc 40) Rebar (Sc 60) Ground Rod Bridge Strand
Make Clean Cuts
The TREC-S524H was designed to cut the toughest steel used in construction today. It can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaws, acetylene torches and cable cutters. The TREC-S524 was designed from the same hydraulic system as the TREC-558U featuring a rapid advance ram for reduced cycle times. With the pull of the trigger, you can cut wire rope up to 3/4”, standard guy wires to 5/8”, and rebar to 5/8”. The specially designed flip-top latch and rotating head provide exceptional ease of use and maneuverability in tight working quarters. The TREC-S524H has an overload bypass, which will “kick out” when tool reaches 8 tons or is attempting to cut materials beyond its capacities.
7.8 Ton 10 lbs. with Battery 12.5”L x 12”H x 2.5”W .95” 3/4” 5/8”, #5 1/2”, #4 5/8” 3/8”
Features • Flip-Top Latching Head • One Hand Operation • Rotational Head • Rapid Advance • Ergonomically Balanced • Ergonomic Pistol Grip Handle • Weather Resistant Housing • Overload Bypass Protection Due to material composition, the ratings are to be used as a guide. Actual capacity may vary due to “bypass” feature.
Replacement Blade
24-08
NOTE: DO NOT CUT CASE HARDENED STEEL RODS. SEE TS-24CC, TSP-24CC, TS-32CC OR TSP-32CC1.
Manual & Battery Operated Hydraulic Tools
www.huskieindustrialtools.com 1-800-860-6170
7
Manual 8 Ton Cutter Model TS-24CC
Anvil-center cut style blades
Manual
Specifications for TS-24CC
Output Weight Size Jaw Opening
8 Ton 9 lbs. 17”L .9”
Cutting Capacities
Ground Rod Rebar (Sc 40) Wire Rope Bridge Strand
5/8” 5/8”, #5 Do Not Cut 3/8”
Features • Flip-Top Latching Head • Anvil-Center Cut Style Blades Due to material composition, the ratings are to be used as a guide. Actual capacity may vary due to “bypass” feature.
NOT FOR WIRE ROPE
The TS-24CC has anvil-center cut style blades. The specially designed flip-top latch and rotating head provide exceptional ease of use and maneuverability in tight working quarters.
8
www.huskieindustrialtools.com 1-800-860-6170
Manual & Battery Operated Hydraulic Tools
6 Ton and 12 Ton Battery Powered Cutters Models TREC-13 and TREC-16
Specifications for TREC-13
Output Weight Size Jaw Opening
6 Ton 12.7 lbs. with Battery 11”L x 12.2”H x 3”W 1/2”
Cutting Capacities
Rebar Ground Rod Steel Bolt
1/2”, #4 1/2” 1/2”
Specifications for TREC-16
Output Weight Size Jaw Opening
12 Ton 13 lbs. with Battery 18”L x 2.7”H x 9.4”W 5/8”
Cutting Capacities
NOT FOR WIRE ROPE
Rebar Ground Rod Steel Bolt
5/8”, #5 5/8” 5/8”
Features • Open “C” Style Head • One Hand Operation • Rotational Head • Rapid Advance • Ergonomic Pistol Grip Handle or Lunchbox Style • Battery Fuel Gauge • Weather Resistant Housing • Overload Bypass Protection
The TREC-13 and TREC-16 were designed to cut the toughest steel used in construction today. Both tools can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaw, acetylene torches and cable cutters. The TREC-13 was designed as a pistol grip type cutter with an open “C” jaw that can hold up to 1/2” round bar while the TREC-16 was designed as a lunchbox style cutter that also has an open “C” jaw that accommodates up to 5/8” round bar. Both tools come with a Lithium-Ion battery and rapid charger. The cutting blades on either tool can be rotated when dull and replaced as necessary.
Manual & Battery Operated Hydraulic Tools
www.huskieindustrialtools.com 1-800-860-6170
9
Underwater Hydraulic Cutter with Nickel Plating Model TPL-S20
For Underwater Use
Output Weight Size Jaw Opening Plating
4.4 Tons (3.9 mt) 6 lbs. (2.7 kg) 16”L (40.6 cm) .75” Nickel
wa
ter
Under
Specifications
Cutting Capacities
Wire Ropes Soft Steel Bolts Rebar, Ground & Anchor Rod Standard Guy Wire
5/8”, 16mm 11/16”, 17mm 1/2”, 13mm 1/2”, 13mm
Features • Minimal Pumping Effort Required to Produce Output Tonnage • Nickel-Plated for Underwater Use • Salt Water Corrosion Resistant • Head Rotates 180° For Easy Positioning
Make clean cuts with minimal effort
The TPL-S20 is a saltwater resistant, nickel-plated cutter for use in underwater environments. Its recommended uses include: marine nautical cutting, emergency cutting of stainless steel wire rope rigging and hardware, underwater rebar and cable cutting, and yacht mast rod cutting up to 1/2”. No need for difficult tools like hacksaws, acetylene cutting torches or pneumatic cutting tools, the TPL-S20 requires only minimum pumping effort to produce specified output tonnage. Especially designed for use by the U.S. Coast Guard, Army Corp of Engineers, offshore drilling companies, longshoremen and port authorities.
NOTE: Flush with fresh water to remove salt after each use.
10
www.huskieindustrialtools.com 1-800-860-6170
Manual & Battery Operated Hydraulic Tools
Battery Powered Light Duty Pump Model TREC-P500
Specifications
Output Weight Size Flow Fluid Reservoir Capacity
10,000 psi 17.5 lbs. with battery 16”L x 10”H x 6.5”D 30 cu/in. at 300 psi 9 cu/in. at 10,000 psi 30 cu/in.
Features • Adjustable 10,000 psi • Eliminates the Need for AC Power • Compact and Portable • Uses 1 BP-80, 14.4V Battery
See Page 4 for Kit Information.
The Huskie TREC-P500 has no external power source to hook up so the operator can get right to work. The push button remote control has a 10 foot cord and operates the advance, hold and retract modes. The TREC-P500 has a rapid advance, twostage pump system and an audible/visual bypass when 10,000 psi is reached. The TREC-P500 uses one, BP-80, 14.4V Battery. A drop out bypass cartridge allows external pressure adjustment from 4,000 to 10,000 psi and complete replacement in minutes. For user convenience, most existing cutting or compression heads can be attached to the 3/8” female coupler on the pump. Huskie recommends the pump be used on tools up to 15 tons. Larger tools up to 30 cu/in. can be used, but will have longer advance and retract times.
Manual & Battery Operated Hydraulic Tools
www.huskieindustrialtools.com 1-800-860-6170
11
Battery Powered Pump Model TREC-P1
Specifications
Output Weight Size
10,000 psi 23 lbs. with 2 Batteries 16”L x 6”H x 10”D
Crimping Estimates
2 BP-80 Using a 10 ft. Hose and EP-60W on 10 1272 ACSR No Load Cycle Advance 25 Sec., Retract Time 30 Sec. Optional Accessories
TFS-14 TURH-14 TREC-P1CASE
Foot Switch, p. 26 Remote Handle, p. 26 Steel Carrying Case
Features • Powerful 28.8 Volt • Operate Up to Single Acting 60 Ton Press • Adjustable 10,000 psi • Eliminates the Need for AC Power • Compact and Portable • Portable Punching System (See Page 25) • No AC Needed
The Huskie TREC-P1 is a 28.8 volt, battery operated hydraulic pump that runs on two 14.4 Volt Huskie BP-70 series batteries. The TREC-P1 is supplied with a push button remote control that allows the operator to advance, hold, and retract when needed. The user is never committed to a full cycle and can always back off at any time during the advance – even when the pump is under pressure. High pressure, non-conductive hose can be attached to a 360° moveable swivel port on the pump. This swivel port allows the user to position the hose to fit in confined aerial buckets and manholes. Both batteries must be inserted in the pump to operate. It is recommended to operate the pump with a 10 foot hose, up to a maximum of 20 feet. A longer hose will cause cycle times to increase. We recommend you specify the Huskie TSC-Series flush face dripless couplers, as not to deplete the oil in the reservoir when changing heads. 12
www.huskieindustrialtools.com 1-800-860-6170
Manual & Battery Operated Hydraulic Tools
Battery Powered Streamlined Mesh/Bar Cutter and Rebar Bender Model TECO-LK
Cutting Capacities
Soft Steel and Non-Ferrous Medium Hard Metals
Up to Rockwell C15 (7/16” or 11mm) Up to Rockwell C31 (3/8” or 10mm)
Features • Cuts Soft Steel, Non-Ferrous and Medium Hard Metals • Can Cut in Tight Compartments • Equal Pressure Throughout Cut • Reliable, Rugged, Handy
Switch tool head to bend rebar Head Model RBH-4
For steel mesh grids, small rods, bar, truck and small locks.
The TECO-LK can cut through soft steel and non-ferrous up to Rockwell C15 (7/16” or 11mm) and medium hard metals up to Rockwell C31 (3/8” or 10mm). This streamlined rebar cutter uses equal pressure throughout the duration of the cut. Switch the tool head to the RBH-4 in order to bend rebar.
Heavy Duty Wire Rope, Bar and Bolt Cutter Model TMSH-65
Specifications
Cutting Capacity
Weight Size
Manual & Battery Operated Hydraulic Tools
Wire Rope-7/16” (Will cut smaller bolt and bar up to 1/4” 5 lbs. 23”L
www.huskieindustrialtools.com 1-800-860-6170
13
Lithium-Ion Battery Model TBP-80
Features • High Capacity 3.0Ah Battery Pack • Lightweight Battery Pack • Impact Resistant Housing • The Performance is Minimally Affected by Extreme Temperatures • Minimal Self-Discharge • No Memory Effect • Non-Hazardous Chemistry and Environmentally Safe • Considerably Longer Run Times as Compared to NiCad • Recyclable with the RBRC Recycling Program • 5 Year warranty
Developed specifically for use with Huskie tools, the TBP-80 Lithium-Ion battery and charger system combines new technology for better performance. The TBP-80 has minimal self-discharge and no memory effect.
Lithium-Ion Battery Charger Models TCH-80 and TCH-80DC
Features • Tri-Chemistry Charger Able to Charge All Huskie Batteries (Li-Ion, NiCad, and NiMH) • Charger Has a Conditioning Feature to Accommodate NiCad and NiMH Memory Effect • Top-Off and Maintenance Trickle Charge for NiCad and NiMH Batteries • UL/CUL Agency Approvals • Monitors Battery Temperature and Battery Voltage for Correct Charging and Battery Faults • 5 Year Warranty • 1 Hour Charge Time
The TCH-80 is able to charge all Huskie batteries and provides a conditioning feature to accommodate NiCad and NiMH batteries. Available in DC for 12V trucks as TCH-80DC. 14
www.huskieindustrialtools.com 1-800-860-6170
Battery and Charger System
Six Bay Lithium-Ion Battery Charger Model TCH-86
Features
The TCH-86 is a 6 bay charger station capable of docking up to 6 TCH-80 trichemistry chargers at once with a single power supply. Charge any combination of Li-Ion, Ni-Cd, or Ni-MH batteries. Set-up the 6 Bay Charger Station and insert up to 6 TCH-80s. The TCH-86 ensures tool batteries are ready for use when the work day starts.
• Able to Charge All Huskie Batteries (Li- Ion, Ni-Cd, and Ni-MH) • Each TCH-80 Charger Has a Conditioning Feature to Accommodate NiCad and NiMH Memory Effect • Maintenance Trickle Charge for NiCad and NiMH Batteries • UL/CUL Agency Approvals • Monitors Battery Temperature and Battery Voltage for Correct Charging and Battery Faults • 5 Year Warranty • 6-8 Hour Charge Time
Charge times are longer when used in the 6 Bay Charger Station versus the stand alone TCH-80 charger.
AC Battery Adapter THK-70
Battery Questions & Answers Question: Will the new Lithium-Ion battery (TBP-80) work on all of my existing Huskie tools? Answer: Yes, consistent with our “all for one and one for all” battery system, the lithium battery will work on all existing and new tools being developed. Question: Will the TCH-80 charger be able to run off an inverter? Answer: Yes, it will work off an inverter and would need to be a minimum of 100W per charger. Question: Will the TCH-80 charger run off a generator? Answer: No, we don’t recommend using this charger or any Huskie charger with a generator. Power surges in generators cause a short circuit in the charger.
The THK-70 is an AC battery adapter that works with all 6 Ton battery operated tools.
Question: The lithium-ion batteries I’ve previously used do not slowly run down, they go from working to dead battery. Will this be the same with the Huskie Lithium-ion batteries? Answer: No, Huskie Lithium-Ion batteries have their own proprietary circuitry. We understand that it will be helpful to feel when a tool is starting to run low on energy. We’ve designed it so that you’ll know when your batteries are in need of charging.
Battery and Charger System
www.huskieindustrialtools.com 1-800-860-6170
15
12 Ton Compression Tool – 1” Jaw Opening Model TEP-410
For Connecting Wire Rope Return Loop Sleeves Specifications
Output Weight Length Jaw Opening
12 Ton 13 lbs. 23” 1”
Connector Range Wire Rope Sleeves 1/8”-1/2” See Page 5 for Wire Rope Dies and Sleeves.
Features • Carrying Case Included • External Pressure Adjustment
The TEP-410, hand operated, compression tool features a two stage rapid advance pumping system. It accepts all U-type dies currently manufactured for 12 ton tools on the market.
12 Ton Remote Compression C-Head – 1” Jaw Opening Model TEP-410H
Specifications
Output Weight Length Jaw Opening
12 Ton 8-1/4 lbs. 10” 1”
Connector Range For Wire Rope
1/8”-1/2”
Remote Head to connect to pumps The TEP-410H is a traditional C-head with a one-inch jaw opening. It will accept all “U” type dies currently used in 12 ton tools on today’s market. A 10,000 psi external pump is required to operate the C-head. The output pressure is 12 tons when the pump is set at 10,000 psi. After a compression is made on a sleeve, an internal ram spring retracts the jaw when the pump pressure is relieved. The tool is supplied with a standard 3/8” male, screw type coupler but can be fitted with an opposite female coupler if requested. Carrying case included.
NOTE: When using any of these high-pressure tools, always use 10,000 psi rated
hose. 16
www.huskieindustrialtools.com 1-800-860-6170
Manual Compression Tool and Head
Wire Rope Dies
12 Ton “U” Type Compression Dies
Features • Designed for Duplex Oval Sleeves and Button Stops • For use on Copper and Aluminum Only • Fits in Any 12 Ton Tool that Uses Standard “U” Dies
ITEM #
Wire Rope Die DESCRIPTION
ALUMINUM
AL # OF CRIMPS
18AC 316AC 14AC 516AC 38AC 716A12C 716C 12A
1/8” AC 3/16” AC 1/4” AC 5/16” AC 3/8” AC 7/16” A, 1/2” C 7/16” C 1/2” A
1/8” 3/16” 1/4” 5/16” 3/8” 7/16”
2 2 2 3 3 3
1/2”
4
COPPER
CU # OF CRIMPS
1/8” 3/16” 1/4” 5/16” 3/8” 1/2” 7/16”
2 2 2 3 3 4 4
Cutting and Crimping Wire Rope with Battery Operated Tools Wire Rope Cutters See Page 6 for the TS-16 (manual) and the TREC-S20 (battery-powered) wire rope cutters.
Wire Rope Crimpers See Page 5 for the TREC3410 and TREC-5430. Manual Crimpers, page 16.
Huskie Battery Operated Tools make the job easy on your body. Ask about our ergonomic training.
For clean wire cutting–No frayed ends
Wire Rope Dies, Sleeves
www.huskieindustrialtools.com 1-800-860-6170
17
Gauges Check a pump’s output pressure
TPG-1 Specifications TPG-1
Description Weight Dial Face Size
In Line Pressure Gauge Kit 3 lbs. 2-1/2” 9” x 4.5” x 1.5”
Specifications TPG-4
Description Weight Dial Face Size
12 Ton Test Gauge Kit (TPG-4) 3.5 lbs. 4” 9” x 4” x 1.5”
Check a tool’s output pressure
See Pumps on pages 11-12 and 24-26.
TPG-4
The TPG-1, in line pressure gauge has standard 3/8” couplers and a 10,000 psi indicator. It is used to test pump output pressure. Male and female couplers allow you to install it between the tool head and the pump. The TPG-4 gauge is used to calibrate 12 ton output tools. It was designed to fit in all brands of 12 ton tools, and is supplied with U-type test dies. If you are using Kearney tools, specify TPG-4K which comes with TTDK-1 test dies. Our TPG-4 gauge comes complete with necessary dies, carrying case, and certification.
18
www.huskieindustrialtools.com 1-800-860-6170
Pressure Gauges
Repairs-All Brands Huskie repairs tools at their headquarters in Glendale Heights, IL. We repair any brand of hydraulic impact wrench, strap hoist, cutting and compression tools (manual or battery operated). Our service department has a combined 60+ years experience in the Hydraulic tool industry.
Before
Why You Should Always Choose Huskie Repairs • Full Maintenance overhauls (including replacing seals, checking balls and springs, etc.) to ensure the tool is fixed correctly the first time. • 1 year ADDITIONAL Warranty on repairs made.
Tools come in for repair with rust, tape holding the body together and general wear and tear. Most repair houses will only fix the one problem.
• 1 time free reconditioning (includes labor and seals) for the lifetime of the tool. (Must be stated when tool is sent in for service). • We only use factory replacement parts to insure the quality of repair remains at the Huskie level. • Repair turnaround is within 5-10 working days after tool is received.
After At Huskie, we do a complete overhaul of your tool, so it looks almost as good as the day you bought it.
Tool Rental Program Get a Huskie tool in your workers’ hands and get the job done right. Why use outdated equipment when the latest tools are available for rental? Renting a Huskie tool is also a great way to conserve capital and preserve credit lines. Our rental program allows your business to respond quickly to new opportunities. Huskie provides customized solutions to address your business’ specific needs. This allows your businesses to work around seasonal fluctuations, budgets and capital program constraints. To learn more about Huskie’s rental program, please call us at 1-800-860-6170, or go online to www. huskietools.com and click on “Tool Rental Program”.
Tool Repairs and Rentals
www.huskieindustrialtools.com 1-800-860-6170
19
Handheld Hydraulic Cutters Model TS-SERIES
Huskie’s TS-Series tools cut anything from guy wire* to rebar and most wire cables. The TS-Series cutters are portable, lightweight, and made to last years under the toughest field conditions. The TS-40B and TS-85 feature a two stage pumping piston for rapid advance. The new TS-240CC, TS-32CC and TSP-24CC hydraulic cutters were specially engineered to cut the toughest EHS guy wire, rebar and anchor rods. The TSP-24CC is the remote head version, which requires an external 10,000 psi pump in order to operate. The anvil style, center cut blades eliminate jamming problems common to shear style cutters, and the blades are easily replaced in the field. The tools are made of high grade steel and have rubber handle grips. All tools are black zinc oxide coated to help reduce corrosion. A flip-top latch opens the tool jaw to easily accept cables and wires. The head can be rotated up to 180° to facilitate easy wire positioning and operator leverage. Consult the chart below to pick the proper cutter for your needs. If there are any questions about capacities, or special applications please contact Huskie.
*NOTE: FOR BRIDGE STRAND SPECIFY TS-240CC, TS-32CC OR THE REMOTE HEADS TSP-24CC OR TSP-32CC1.
Model
TS-16
Specifications TS-20 TS-24 TS-32
Output
4.4 Ton
4.4 Ton
7.8 Ton
19.8 Ton
7.8 Ton
19.8 Ton
Weight
6 lbs.
5.75 lbs.
9 lbs.
21 lbs.
11 lbs.
23 lbs.
Length
15”L
14”L
17”L
27”L
18.5”L
27”L
.6”
.75”
.9”
1.25”
.9”
1.25”
Do Not Cut
Do Not Cut
Jaw Opening
TS-240CC
TS-32CC
Capacities Wire Ropes Soft Steel Bolts Rebar, Ground & Anchor Rod Chain
20
16mm
20mm
22mm
32mm
5/8”
3/4”
7/8”
1-1/4”
16mm
17mm
22mm
32mm
16mm
26mm
5/8”
11/16”
7/8”
1-1/4”
5/8”
1”
13mm
13mm
16mm
22mm
16mm
26mm
1/2”
1/2”
5/8”
7/8”
5/8”
1”
Do Not Cut
Do Not Cut
Do Not Cut
Do Not Cut
1/4”
1/2”
www.huskieindustrialtools.com 1-800-860-6170
Hydraulic andheld C Hompression ydraulic Cutters Tools
Handheld Hydraulic Cutters Model TS-SERIES
TS-16
TS-20
TS-24
TS-32
Handheld Hydraulic Cutters
TS-24CC
Center Cut
TS-32CC
Center Cut
www.huskieindustrialtools.com 1-800-860-6170
21
Hydraulic Operated Remote Cutting Heads Model TSP-SERIES
The TSP-SERIES remote head units connect to any 10,000 psi, high pressure, hydraulic pumping system. Choose from seven different models of production cutters, to cut costs and efforts. A 3/8” screw-type male coupler is supplied with each tool. The Huskie remote cutters have a hinged head which can be opened for easy cable or bar insertion. The movable blade advances in a shear fashion, to cut the material cleanly. When the cutting pressure is relieved an internal ram spring retracts the blade. The guillotine cutting style was chosen over scissor type cutting because of its powerful output force, larger cable capacities, compact size and reliability. All tools can be used under water, consult factory for specific applications.
NOTE: FOR BRIDGE STRAND SPECIFY TS-24CC, TS-32CC OR THE REMOTE HEAD TSP-32CC1.
Features • Lightweight and Portable • Operate from Any 10,000 psi Hydraulic Source • Works in Any Position
Model
TSP-20
Specifications TSP-24 TSP-24CC TSP-32
Output
4.4 Ton
7.8 Ton
7.8 Ton
20 Ton
24 Ton
Weight
3 lbs.
6 lbs.
21 lbs.
21 lbs.
26 lbs.
Length
8”L
11”L
14”L
14”L
13.5”L
Jaw Opening
.75”
.9”
.9”
1.25”
1.25”
32mm
Do Not Cut
TSP-32CC1
Capacities Wire Ropes Soft Steel Bolts Rebar, Ground & Anchor Rod Standard Guy Wire Bridge Strand
22
20mm
22mm
5/8”
7/8”
14mm
20mm
16mm
32mm
26mm
9/16”
3/4”
5/8”
1-1/4”
1”
13mm
16mm
16mm
26mm
26mm
1/2”
5/8”
5/8”
1”
1”
14mm
16mm
14mm
22mm
22mm
1/2”
5/8”
9/16” EHS
7/8”
7/8” EHS
Do Not Cut
Do Not Cut
Do Not Cut
Do Not Cut
5/8”
www.huskieindustrialtools.com 1-800-860-6170
Do Not Cut
1-1/4”
Hydraulic RemoteCCompression utting Heads Tools
Hydraulic Operated Remote Cutting Heads Model TSP-SERIES
TSP-20
TSP-24
TSP-24CC
Center Cut
TSP-32
TSP-32CC1 Cuts 5/8” Bridge Strand and 1” Rebar
Center Cut
Remote Cutting Heads
www.huskieindustrialtools.com 1-800-860-6170
23
10,000 psi Hydraulic Hand Pump Model THP-700
Specifications
Weight Length Oil Reservoir 1st Stage 2nd Stage
20 lbs. 23” 44 cu/in fluid .75 cu/in per stroke .14 cu/in per stroke
Features • Two-Stage Pump Piston for Rapid Advance • External Pressure Adjustment from 4,000- 10,000 psi • Can Be Operated in Any Position • Knob Type Release Valve
The THP-700 a portable, tough, hydraulic steel pump that has two speed pumping pistons for rapid advance and an external adjustable pressure setting from 4,000 to 10,000 psi output. An internal oil bladder allows the tool to be used in any position. Our exclusive replaceable, by-pass cartridge is standard in the THP-700. Field repairs and pressure adjustments can be made in minutes. Use our PG-1 gauge for pressure adjustments.
NOTE: When using any of these high pressure tools, always use 10,000 psi rated
hose.
10,000 psi Hydraulic Foot Pump Model TFP-700
Specifications
Weight Length Oil Reservoir 1st Stage 2nd Stage
25 lbs. 28” 44 cu/in fluid .75 cu/in per stroke .14 cu/in per stroke
Features • Two-Stage Pump Piston for Rapid Advance • External Pressure Adjustment from 4,000- 10,000 psi • Can Be Operated in Any Position • Knob Type Release Valve
The TFP-700 a portable, tough, hydraulic steel pump that has two speed pumping pistons for rapid advance and an external adjustable pressure setting from 4,000 to 10,000 psi output. An internal oil bladder allows these tools to be used in any position. Our exclusive replaceable, by-pass cartridge is standard in the TFP-700. Field repairs and pressure adjustments can be made in minutes. Use our TPG-1 gauge for pressure adjustments.
NOTE: When using any of these high pressure tools, always use 10,000 psi rated
hose.
24
www.huskieindustrialtools.com 1-800-860-6170
Hydraulic Pumps
1/2 HP, 10,000 psi Hydraulic Pump Model TR-14EF
Specifications
TSP-24 (not included)
TSP-32CC1 (not included)
Weight Size Power Output Delivery @ 200 psi Delivery @ 10,000 psi Oil Capacity
34 lbs. 7”L x 6”W x 14”H 1/2 HP-6.5 Amp 157 cu/in/m 19 cu/in 120 cu/in (2 quarts)
Optional Accessories
TMC-14 TURH-14 TFS-14
The TR-14EF remote operated pump gives the operator complete control. Push buttons permit the user to advance and retract at will. The user is never committed to a full cycle, and can always back off at any time during the advance even under pressure. This feature increases efficiency because cuts and crimps can be adjusted as necessary, simply by stopping the advance or retract mode. A 10-foot remote control cable provides both safety and convenience. The user can set up an operation and then move away from the work site before engaging the tool. An over-ride switch on the pump allows full control at the pump motor. The low amperage of this pump allows it to be used virtually anywhere. The pressure can be easily adjusted between 4,000 and 10,000 psi and determined by using our TPG-1 in-line gauge. Consult factory for proper adjusting procedure.
Steel Carrying Case Remote Control Handle Foot Switch
Features • Remote Operation Allows Full Operator Control • Advance and Hold Feature Standard • Manual Control Directly on Pump Motor • Pressure Adjustment from 4,000-10,000 psi
NOTE: When using any of these high pressure tools, always use 10,000 psi rated hose.
3/4 HP, 10,000 psi Single Acting Hydraulic Pump Model TR-14EA
Specifications
TSP-32 (not included)
TSP-32CC1 (not included)
Weight Size Power Output Delivery @ 300 psi Delivery @10,000 psi Oil Capacity
75 lbs. with Oil 14”L x 13.25”W x 16”H 3/4 HP - 8.2 Amp 157 in3/min 36 in3/min 182 cu/in (3 quarts)
Optional Accessories
TURH-14 TFS-14
Remote Control Handle Foot Switch, p. 26
Features The TR-14EA is a fully remote controlled, single acting, 10,000 psi, electric pump. The two button hand control allows the user to advance, hold, or release at any time. When 10,000 psi is reached, the pump will automatically shut off and hold until the operator pushes the release button to retract the tool. There is an auto cycle switch that allows the operator to push the advance button and the pump will automatically advance, run to 10,000 psi and release. This feature is mostly used for production crimping and cutting where the operator must have the freedom of both hands. A remote foot control pedal is optional.
• Remote Operation Allows Full Operator Control • Manual and Automatic Mode for Additional Versatility • 3/4 HP Rating • Low Amperage Requirement
NOTE: When using any of these high pressure tools, always use 10,000 psi rated hose.
Hydraulic Pumps
www.huskieindustrialtools.com 1-800-860-6170
25
5 HP, Gas Engine 10,000 psi Hydraulic Pump Model TGHP-5
Specifications
Weight Oil Capacity Max Pressure Power Output Oil Delivery @ 100 psi Oil Delivery @ 10,000 psi
128 lbs. 2.5 Gallons 10,000 psi 5 HP 480 in3/min 55 in3/min
Features • Four Way Valve Allows for Single or Double Acting Capacity • Standard Screw Type Male and Female Couplers
Gasoline Driven
The TGHP-5 is a self-contained high pressure pump, with manual operation. It is equipped with a 5 HP Honda engine. A four-way valve controls the hydraulic fluid direction for the advance and retract modes. One double acting tool can be operated or two single acting tools at one time. Connection to one port for single acting tools will work since the control valve will dump the fluid when shifted to the retract position. The pump is very compact and comes with carrying handles.
NOTE: When using any of these high pressure tools, always use 10,000 psi rated
hose.
26
www.huskieindustrialtools.com 1-800-860-6170
Hydraulic Pumps
35 Ton Hydraulic Steel Punch Model TSH-70M
The portable TSH-70M punch was designed to punch holes through 1/2” mild steel, aluminum and copper. The punched hole size is 1/16” larger than your bolt size. A stripper guide extends on either side of the ram to strip the material after punching. This hand-held unit will operate from any 10,000 psi hydraulic pumping source. Some uses include the punching of bus bars, tower iron, railing, I-beams and truck frames. Custom size punch and dies are available upon request. Oval and square sizes are also available. Consult factory for order information. The TSH-70M and TSH70F comes complete with four sets of punch and die sizes for 3/8”, 1/2”, 5/8” and 3/4” bolts and carrying case.
NOTE: USE ONLY 10,000 psi RATED HOSE.
Specifications
Output Weight Capacity Max. Hole Dimensions Throat Depth Order Data TSH-70M
TSH-70F
35 Ton 28 lbs. 1/2” Thick Mild Steel 13/16” Diameter 14” x 8” x 3.5” 2.75” Steel Punch with Male Coupler Steel Punch with Female Coupler
Features • Punches Up to 1/2” Mild Steel • 13/16” Max Hold Diameter • Will Punch: Oval, Round, Square, and Slotted Holes • Custom Sizes Available • Operates from a 10,00 psi Pump Source
Round Dies ITEM
DESCRIPTION
BOLT SIZE
SHD-18 SHD-316 SHD-14 SHD-932 SHD-516 SHD-38 SHD-716 SHD-12 SHD-916 SHD-58 SHD-1116 SHD-34 SHD-1316
1/8” Punch & Die Set 3/16” Punch & Die Set 1/4” Punch & Die Set 9/32” Punch & Die Set 5/16” Punch & Die Set 3/8” Punch & Die Set 7/16” Punch & Die Set 10.5 1/2” Punch & Die Set 9/16” Punch & Die Set 13.5 5/8” Punch & Die Set 11/16” Punch & Die Set 17.5” 3/4” Punch & Die Set 13/16” Punch & Die Set 20.5
3/8” 1/2” 5/8” 3/4”
Oblong Dies ITEM
DESCRIPTION
TSHD-516X1316 TSHD-38X1316 TSHD-716X1316 TSHD-12X38 TSHD-12X34 TSHD-12X1316 TSHD-916X34 TSHD-916X1316 TSHD-58X1316 TSHD-1116X1316 TSHD-34X1316
5/16” X 13/16” Oblong Punch & Die Set 3/8” X 13/16” Oblong Punch & Die Set 7/16” X 13/16” Oblong Punch & Die Set 1/2” X 3/8” Oblong Punch & Die Set 1/2” X 3/4” Oblong Punch & Die Set 1/2” X 13/16” Oblong Punch & Die Set 9/16” X 3/4” Oblong Punch & Die Set 9/16” X 13/16” Oblong Punch & Die Set 5/8” X 13/16” Oblong Punch & Die Set 11/16” X 13/16” Oblong Punch & Die Set 3/4” X 13/16” Oblong Punch & Die Set
Hydraulic Punch
BOLT SIZE
3/8”
Square Dies ITEM
DESCRIPTION
TSHD-14SQ TSHD-38SQ TSHD-716SQ TSHD-12SQ TSHD-1732SQ TSHD-916SQ
1/4” Square Punch & Die Set 3/8” Square Punch & Die Set 7/16” Square Punch & Die Set 1/2” Square Punch & Die Set 17/32” Square Punch & Die Set 9/16” Square Punch & Die Set
Hex Dies 1/2” 1/2” 5/8”
ITEM
DESCRIPTION
TSHD-716HEX TSHD-916HEX TSHD-1116HEX TSHD1316HEX
7/16” Hex Punch & Die Set 9/16” Hex Punch & Die Set 11/16” Hex Punch & Die Set 13/16” Hex Punch & Die Set
www.huskieindustrialtools.com 1-800-860-6170
27
Remote Control Handle Model TURH-14
Specifications
Weight Size
See page 25 for TR-14EF.
3 lbs. 8”L x 1.5”W x 6.5”H
Order Data
TURH-14 TREC-URH
Remote Control Handle Remote Control Handle for REC-P1
Features • For Use with All Electrical and Battery Operated Single Acting Pumps • Allows Operator One Hand Control at the Tool Head • 10 Foot Cord
The TURH-14 remote control handle is for use with the TR-14EF, TR-14EA and TREC-P1 pumps. It is equipped with a standard 3/8” high pressure coupler that can be easily matched to your existing tool head. A 10 foot, three wire control cable can be hooked directly to the TR-14EF or hard wired to any pump that has similar remote control features. The TURH-14 weighs only three pounds and is made of tough, durable, molded plastic with a double insulated on/off switch.
Foot Switch Model TFS-14
See page 25 for
Specifications
Weight Size
TR-14EA.
4.2 lbs. 9.5”L x 7”W x 3”H
Optional Accessories
TURH-14 TFS-14
Remote Control Handle Foot Switch
Features • For Use with All Electrical and Battery Operated Single Acting Pumps • Allows Operator “Hands Free” Control of Advance and Retract Pump Mode • 10 Foot Cord
28
www.huskieindustrialtools.com 1-800-860-6170
The TFS-14 was designed to replace our pendant hand control on pump models TR-14EF, TR-14EA, TR-14EAD and TREC-P1. This foot control allows the operator to free his hands for better control of his work load. It has a green pedal for the advance mode and a red pedal for the retract mode. The TFS-14 is mostly used in work bench applications.
Pump Accessories
10,000 psi High Pressure Hydraulic Hose Model TNC-SERIES
Order Data
TNC-1606 TNC-1610 TRB-1610 TNC-1615 TNC-1620 TNC-1625 TNC-450
3/16” x 6’ 3/16” x 10’ 3/16” x 10’ (Rubber Bound) 3/16” x 15’ 3/16” x 20’ 3/16” x 25’ 1/3” x 50’ (1/4” NPT Standard Ends) 3/8” NPT hose ends standard. 1/4” NPT also available. Any combination of high pressure couplers are available. Simply specify the kind you require when ordering.
Our high pressure TNC-SERIES hoses and couplers are rated at 10,000 psi working pressure. The hose ends are covered with a thick clear jacket of heavy duty shrink wrap to reduce the risk of hose bursts at these points. They are also date coded during assembly. As a result of injuries sustained by operators of hydraulic products via broken or damaged high pressure hoses Huskie has developed a replacement hose improvement program for our customers. Consult your representative for information. Our hoses come standard with 3/8” male/female couplers - specify length.
NOTE: FOR OPERATOR SAFETY WE RECOMMEND HOSE REPLACEMENT AFTER
3 YEARS.
Looking for a Punch and Pump Setup?
2
3
1
TREC-P1: 10,000 psi Battery Powered 14.4 Volt Pump, Page 11
2
TSH-70M: 35 Ton Hydraulic Steel Punch,hPage 27
3
TNC-SERIES: 10,000 psi High Pressure Hydraulic Hose, shown above
1
Pump Accessories
www.huskieindustrialtools.com 1-800-860-6170
29
10,000 psi High Pressure Flush Face Couplers Model TSC-SERIES
Specifications
Hose End 3/8” NPT Threaded End 3/8” NPT Working Pressure 10,000 psi Minimum Burst Pressure Coupled 34,800 psi Uncoupled 29,000 psi Hand Connection 250 psi at 150 lbs. Fluid Loss Per .035 ml Disconnection Order Data
TSCF-8F TSCF-8 TSCM-8 TFC-8F TFC-8 TDC-SCF
Female Half with Female Port Female Half with Male End Male Half with Female Port Female Half with Female Port Female Half with Male Port Female Cap
TFC-8F TSCF-8F
TSCF-8
TSCM-8
*See Order Data for more couplers The TSC-SERIES are flush face, snap-type couplers for use in high pressure applications. They are not interchangeable with low pressure flush face couplers. Positive connect or disconnect prevents tool failure due to partial coupled halves of conventional screw-type couplers.
Features • 10,000 psi Operating Pressure Marked on Both Halves • Simple Quick Connect and Disconnect • Twist Sleeve Lock to Prevent Accidental Disconnect • Flush Face, NON-DRIP Valving, Both Halves
Hydraulic Oil Order Data
THF-5G THF-1G THF-1Q THF-5GRED
5 Gallon Container Gallon Container Quart Container Red Hydraulic Fluid for Low Temperatures THF-1GRED Red Hydraulic Fluid 1 Gallon THF-1QRED Red Hydraulic Fluid Quart
Huskie offers replacement Hydraulic Oil in three sizes for any service needs. It is our own MV-32 clear hydraulic fluid and can be used in all of our hydraulic products. This fluid can also be added to other clear hydraulic fluids for filling or topping off a hydraulic circuit. Do not mix with other red or blue colored hydraulic fluids as this will “gel” and cause the tool or pump to malfunction. A complete MSDS is available from Huskie upon request.
30
www.huskieindustrialtools.com 1-800-860-6170
Hydraulic Accessories
Why Huskie? Services Available • 2 year warranty for battery operated tools. • 5 year incomparable warranty Huskie batteries against manufacturing defects. • Huskie representatives will supply demonstration tools for comparison with the competition – try before you buy. • No waiting …tools are in stock with over 5 million in inventory. Same day shipping available, overnight delivery. • Ergonomics solutions specialists available for seminars on ergonomics (contact factory). • Ergonomic reports, data and studies available. • Huskie battery operated tools are live line tested to 75KV. • Huskie is constantly introducing new tools to the industry. • Engineering available for special applications.
Demand Quality • Huskie has over 30 years experience in serving the industry. • Huskie set the industry standards on battery operated cutting and compression tools since 1989. • Huskie tools are the most widely used hand and battery operated tools in the U.S. utility market for cutting and compression. • Huskie believes in one battery fits all – over 25 battery operated Huskie tools available. • Huskie products have been proven to be the most dependable and reliable tools in the utility industry. • Huskie stands behind its products 100%, that’s why we have put a 2 year warranty on our hydraulic, battery operated tools and battery system. • Many Huskie tools were designed and engineered in the U.S. for use on U.S. applications. • Huskie Tools is centrally located in the Midwest for sales, warehouse, repairs and service.
Repair Services • Hi-tech, state of the art, documental repair service center.
• One time free reconditioning during lifetime of any tool (no labor charges).
• In house repair turnaround within 1 week.
• No cost battery recycling or disposal.
• Dedicated repair technicians for product trouble • Battery rejuvenation after 5 year warranty is up. shooting. • Stock on all Huskie parts. • Overnight emergency tool repair available. • Repair training available.
www.huskieindustrialtools.com 1-800-860-6170
31
1-800-860-6170 www.huskieindustrialtools.com
7/2010