CS-4108-N, CL-4124-N Technical Data Sheet
17.07.2013
imc C-SERIES: CS-4108-N, CL-4124-N Compact measurement systems with isolated inputs Data Sheet Version 1.0
device type: CS, 8 analog channels
device type: CL, 24 analog channels
The devices of the imc C-SERIES CS-4108-N and CL-4124-N are 8- and 24-channel all-purpose measurement systems, respectively, with sampling rates of up to 50 kHz per channel. They are specially designed for measurement tasks in environments with unclear voltage fields such as test rigs or largescale machinery. The input channels are electrically isolated, differential and equipped with per-channel signal conditioning including filters. imc C-SERIE - complete, compact and portable measurement devices The devices of the imc C-SERIES are equipped with a defined standard configuration and available in two different housing types: "CS" in a Alu-Profile housing and "CL" in a dark flat plastic housing with carrying leafs. Highlights Stand-alone startup and power-failure control logic Real-time signal processing and test control with imc Online FAMOS (as standard equipment) intelligent power supply with UPS function and saving of data when power-failure integrated CAN-Interface Counter inputs (measurement of angle, events, velocity etc.) digital inputs and outputs analog outputs (DAC) Onboard flash storage (CF card) or network-harddrive (NAS etc.) complex triggering system PC independent possible equipment with internal WiFi (WLAN) adaptor supports platform independent remote access via standard interner browser (optionally integrated imc REMOTE Webserver) adapted to synchronization with other imc measurement devices via: isolated Sync-Signal (DCF-77, IRIG-B) network based via NTP GPS Measurement channel extension via direct connection of measurement modules belonging to imc's CANSAS series In conjunction with the operating software imc STUDIO and im c DEVICES the devices are immediately ready to take measurements, and all of their functions are operable.
Errors and changes excepted For more information, contact: Berlin: +49 - 30 - 46 70 90 - 0
1
CS-4108-N, CL-4124-N Technical Data Sheet
17.07.2013
Overview of the available devices Order Code
article number
CS-4108-N
1400073
CS-4108-N-ET
1410037
CL-4124-N
1400074
CL-4124-N-ET
1410038
housing
analog channels
CS alu profile
8
extra extended temp.- range
CL portable housing
24
extended temp.- range
Mechanical drawings with dimensions Housing type: CS (95x111x185 mm)
Housing type: CL (270x85x300 mm)
Errors and changes excepted For more information, contact: Berlin: +49 - 30 - 46 70 90 - 0
2
CS-4108-N, CL-4124-N Technical Data Sheet
17.07.2013
Required software version Supported by imc STUDIO 4.0R1 and imc DEVICES 2.8R3, or higher, included with all functions Supported by imc STUDIO 3.0R4 and imc DEVICES 2.7 R3, with slightly limited functions (in particular without Web-Server). Experiments (configurations) that are configured with older devices or predecessor devices and also with software versions downwards to imc DEVICES 2.6 are completely transferable (assignable) imc Plug & Measure (TEDS) This device supports TEDS and can be used together with imc SENSORS. Included accessories 230/110 V power adapter (optionally with country-specific power cable) Installation-DVD of the imc operating software with manual (German and English) "Getting Started with imc C-SERIES" (printed) Manufacturer's Calibration Certificate 1x Ethernet network cable crossed and 1x uncrossed 1x LEMO.1B plug with CS devices and with CL devices 1x LEMO.0B Terminal connections 2x or 6x ACC/DSUB(M)-T4
1x ACC/DSUB(M)-DI4-8 1x ACC/DSUB(M)-DO8 1x ACC/DSUB(M)-ENC4 1x ACC/DSUB(M)-DAC4
DSUB-15 plug with screw terminals for 4-channel measurement of voltages as well as temperatures with PT100 and thermocouples with integrated cold junction compensation (CJC). DSUB-15 plug with screw terminals for 8 digital inputs DSUB-15 plug with screw terminals for 8 digitale Ausgänge DSUB-15 plug with screw terminals for 4 counter inputs DSUB-15 plug with screw terminals for 4 analog outputs
Optional accessories Terminal connections ACC/DSUB(M)-U4 ACC/DSUB(M)-I4 ACC/DSUB-ICP4
DSUB-15 plug with screw terminals for 4-channel voltage measurement DSUB-15 plug with screw terminals for 4-channel current measurement of up to 50 mA (50 shunt, scaling factor: 0.02A/V) DSUB-15 plug with screw terminals for conditioning of 4 IEPE/ICP inputs
Errors and changes excepted For more information, contact: Berlin: +49 - 30 - 46 70 90 - 0
3
CS-4108-N, CL-4124-N Technical Data Sheet
17.07.2013
General technical specs for all devices of imc C-SERIES Parameter Housing type Ingress Protection
Value
Remarks
Alu profile
CS
plastic portable housing
CL
IP20
Terminal connection Terminal connection (DSUB-15)
ACC/DSUB(M)-T4
analog inputs
ACC/DSUB(M)-U4 ACC/DSUB(M)-I4 ACC/DSUB-ICP4
Terminal connection (DSUB-15)
ACC/DSUB(M)-DI4-8
8 digital inputs
DI, DO, INC, DAC
ACC/DSUB(M)-DO8
8 digital outputs
ACC/DSUB(M)-ENC4
4 counter inputs
ACC/DSUB(M)-DAC4
4 analog outputs
Further terminal connections
RJ45 CF-Card slot 2x DSUB-9
Ethernet (10/100 MBit), PC/network removable storage two CAN-nodes
DSUB-9
external Display (CS)
DSUB-9
external GPS module
BNC
synchronization
LEMO FGG.1B.302.CLAD62Z
supply (CS)
LEMO FGG.0B.302.CLAD62Z
supply (CL)
Weight without table-top power adapter
approx. 2 kg
CS
approx. 3.5 kg
CL
Dimensions (WxHxD) in mm
95 x 111 x 185
CS
270 x 85 x 300
CL
Power supply Parameter
Value
Remarks
DC input supply voltage
10 V to 32 V DC
Isolation of supply input
not-isolated
CS
isolated
CL
Power adapter Auto start upon power up Automatic shutdown with data saving upon power fail UPS UPS buffer time constant
110 V / 230 V AC configurable
automatic start of measurement
yes battery: lead-gel 1 sec (with CS) 30 sec. (with CL)
Internal battery voltage
external adapter, included in delivery
uninterruptable power supply maximum duration of a continuous outage before triggering device shutdown
4V
CS
24 V
CL
Errors and changes excepted For more information, contact: Berlin: +49 - 30 - 46 70 90 - 0
4
CS-4108-N, CL-4124-N Technical Data Sheet
17.07.2013
Power supply Parameter
Value
Remarks
Effective buffer capacity
typ. 23°C, battery fully charged
Minimum charging time for 1 min. buffer duration Charging time for empty battery
3,5 Wh
CS
5,1 Wh
CL
19 min
for empty battery, 23°C CS
21 min.
CL
6h
device activated
Charging capacity
automatic charge control 1.1 W
CS
1.5 W
CL
Operating conditions Operating environment (standard)
dry, non corrosive environment within specified temperature range
Operating temperature (standard)
-10°C to +55°C no condensation
Operating temperature(extended)
-20°C to +85°C with condensation
Operating altitude
up to 2000 m
Relative humidity
80 % for less than 31°C, for more than 31°C linear declining to 50%, according DIN EN61010-1
Data acquisition and hardware options Max. aggregate sampling rate
400 kS/s
Sampling rate channel wise configurable in steps of 1-, 2-, 5 Number of simultaneously applicable sampling rates (in one configuration)
2
Monitor channels (doubled channels with independent sampling and trigger configurations) Multi-triggered data acquisition: multitrigger and multi-shot Independent trigger machines (start/stop, arbitrary channel assignments)
48
Extensive intelligent trigger functions Direct onboard data reduction: arithmetic mean, min, max Extensive real-time calculation and control functions
Synchronization
External GPS signal receiver
included in standard deliveries (via imc Online FAMOS) DCF 77, IRIG-B (auto detect) NTP GPS O
Internal WiFi (WLAN) adaptor
O IEEE 802.11g (1 Antenna) max. 54 MBit/s
Errors and changes excepted For more information, contact: Berlin: +49 - 30 - 46 70 90 - 0
5
CS-4108-N, CL-4124-N Technical Data Sheet
17.07.2013
Data storage internal removable storage
CF-Card (covered CF slot)
internal hard drive
O (with CL)
Any memory depth with pre- and post triggering Circular buffering
Synchronization and time base Time base per device without external synchronization Parameter
Value typ.
Accuracy internal time base RTC Drift
±20 ppm
Ageing
min. / max.
Remarks
±50 ppm
balanced (default), at 25°C
±50 ppm
-40°C to +85°C operating temperature
±10 ppm
@ 25°C; 10 years
Time base per device with external synchronization signal Parameter Supported formats
GPS
DCF77
NMEA / PPS*
IRIG-B
NTP
B002
Version 4 (downwards compatible)
B000, B001, B003** Precision
±1 µs
Jitter (max.)
±8 µs 5 V TTL level
Voltage level
TTL (PPS*)
5 ms is necessary
---
** using BCD information only
Synchronization with DCF77 for several devices (Master/Slave) Parameter
Value typ.
max. cable length
min. / max. 200 m
max. number of devices
20
Common mode
max. 50 V
Voltage level DCF input/output
Remarks BNC cable RG58 Slaves, plus 1 Master SYNC-signal is already internally isolated, for reliable operation even with different ground voltage level (ground loops)
5V "SYNC" connection
BNC
Errors and changes excepted For more information, contact: Berlin: +49 - 30 - 46 70 90 - 0
6
CS-4108-N, CL-4124-N Technical Data Sheet
17.07.2013
Cx-41xx analog inputs Technical Specs Parameter
Value
Analog inputs Measurement modes
Remarks
8
CS
24
CL
voltage thermocouple, RTD (Pt100) current current fed sensors
Terminal connection (DSUB-15)
ACC/DSUB(M)-T4
analog inputs
ACC/DSUB(M)-U4
with thermo plug (ACC/DSUB(M)-T4) with shunt plug (ACC/DSUB(M)-I4) with plug (ACC/DSUB-ICP4)
ACC/DSUB(M)-I4 ACC/DSUB-ICP4
Sampling rate, Bandwidth, Filter, TEDS Parameter
Value
Remarks
Sampling rate
100 kHz
per channel
Bandwidth
0 Hz to 11 kHz
-3 dB
0 Hz to 8 kHz
-0.2 dB
Resolution
16 Bit
internal processing 24 Bit
Filter (digital) cut-off frequency, characteristic, order
2 Hz to 5 kHz
TEDS - Transducer Electronic DataSheets
conform IEEE 1451.4 Class II MMI
Butterworth, Bessel low pass filter: 8th order high pass filter: 4th order band pass: LP 4th and HP 4th order Anti-aliasing filter: Cauer 8.order with fcutoff = 0.4 fa ACC/DSUB(M)-TEDS-xx
General Parameter
Value typ.
min. / max.
Isolation nominal rating
60 V
test voltage
300 V (10 sec.)
Overvoltage protection
60 V ESD 2 kV
Input coupling configuration
transient protection: automotive load dump ISO 7637, Test impulse 6 DC differential, isolated
Errors and changes excepted For more information, contact: Berlin: +49 - 30 - 46 70 90 - 0
Remarks channel to case (earth) and channel-to-channel not with ICP plug differential input voltage (continuous) human body model test pulse 6 with max. -250 V Ri=30 , td=300 µs, tr 5 V on ranges < 5 V or device powered-down
Remarks with IEPE (ICP)-extension plug
+5 V >0.26 A 1.0
5% >0.2 A 1 G , < 40 pF
channel-to-ground (housing)
> 1 G , < 10 pF
channel-to-channel
> 165 dB (50 Hz) > 92 dB (50 Hz)
range range
Channel isolation (crosstalk)
Errors and changes excepted For more information, contact: Berlin: +49 - 30 - 46 70 90 - 0
2V 5V
Rsource = 0
Rsource
100
8
CS-4108-N, CL-4124-N Technical Data Sheet
17.07.2013
Temperature measurement - thermocouples Parameter
Value typ.
Measurement range
min. / max.
R, S, B, J, T, E, K, L, N
Resolution
Remarks according IEC 584
0.063 K (1/16 K)
Measurement uncertainty
< 0,6 K
type K, range -150 °C to 1200 °C type T, range -150 °C to 400 °C type N, range 380 °C to 1200 °C
< 1.0 K
type K, range -200 °C to -150 °C type T, range -200 °C to -150 °C
< 1.5 K
Temperature drift
0.02 K/K Ta
Ta= |Ta -25 °C| ambient temperature Ta
Uncertainty of cold junction compensation Temperature drift
type N, range -200 °C to 380 °C
< 0.15 K
with ACC/DSUB-T4 Tj = |Tj -25°C| cold junction temperature Tj
0.001 K/K Tj
Temperature measurement – PT100 Parameter Measurement range
Value typ.
min. / max.
Remarks
-200 °C to +850 °C -200 °C to +250 °C
Resolution
0.063 K (1/16 K)
Measurement uncertainty < 0.2 K < 0.05 % Temperature drift Sensor feed (PT100)
0.01 K/K Ta 250 µA
Errors and changes excepted For more information, contact: Berlin: +49 - 30 - 46 70 90 - 0
4-wire connection -200 °C to +850 °C plus of reading Ta=|Ta -25 °C|; ambient temp. Ta non-isolated
9
CS-4108-N, CL-4124-N Technical Data Sheet
17.07.2013
Technical Specs: Features (for all devices of imc C-SERIES) Digital Inputs Parameter
Value
Channels Configuration options
Remarks
8
common ground reference for each 4-channel group, isolated from the other input group
TTL or 24 V input voltage range
configurable at the DSUB globally for 8 Bits: jumper from LCOM to LEVEL:activates TTLmode LEVEL unconnected: activates 24 V-mode
Sampling rate
10 kHz
per channel
Isolation strength
±150 V
tested ±200 V isolated to system ground, supply and untereinander
Input configuration
differential
Input current
max. 500 µA
Switching threshold
isolated mutually and from supply
1.5 V (±200 mV)
5 V level
8 V (±300 mV)
24 V level
Switching time