ICCE-20 July 22-28, 2012 in Beijing, China PRELIMINARY ACCEPTED PAPER TITLES We are anxious to delete many paper titles for those who surely cannot attend this conference, please help us to reduce no shows. We are still accepting limited NEW paper titles, especially from young lecturers and graduate students who needs visibilities

ICCE-20 KEYNOTE LECTURES Monday July 23, 2012 Catalyst Nanoparticles Characterization Using Local Adaptive Threshold (LAT) Image Processing On TEM Micrographs Petra BELE (TU Munich, Germany) 40 min Micromoulding Structuring Of Polymers, Polymer Nano Composites And Blends Phil D. COATES, B.R. Whiteside, M.T. Martyn (U. Bradford, UK), Q. Yang, Y. Chen, Q. Wang, H. Xia (Sichuan U., China) Metal and Semiconductor Nanoparticles on Graphene: Novel Applications in Energy Conversion and Catalysis Mohamed S El-SHALL (Virginia Commonwealth U., Richmond) Enhanced Cryogenic Mechanical Properties Of Epoxy Nanocomposites By Nanofillers Shao-Yun FU (Tech Inst.Phy.Chem., CAS, Beijing, China) Modelling Laminated Plates And Shells By Meshless Methods Antonio J.M. FERREIRA (U. Porto, Portugal) Oxide Thin-Film Transistors for Flat Panel Display and Transparent Electronic Applications Mamoru FURUTA (Koichi U.T., Japan) Globalization in Education and Research Kendall HARRIS (Prairie View A&M U., TX) Potential use of Smart Technologies for Composites Wind Turbine Development Alan LAU (Hong Kong Poly U.) Shape Memory Polymer Composites: Active Materials for Shape Changing Jinsong LENG (Harbin I.T., China) Nanostructuring Wide Bandgap Semiconductors for High Temperature Thermoelectric Applications Na LU (U. North Carolina Charlotte) Disorder Engineering: Turning TiO2 Nanoparticles Black Samuel S. MAO (LBNL, Berkeley, Calif.) Frontiers of Nanostructured Materials and Nanocomposites Jay NARAYAN (North Carolina St.U., Raleigh) Quantum-Confined Metal Oxide Hetero-Nanostructures for Clean Energy Lionel VAYSSIERES (Xian Jiaotong U., China)

Nano-Metals And Composites Through Solution Processing Gunnar WESTIN, Koroush Lashgari, Annika Pohl, Asa Ekstrand (Uppsala U., Sweden), Kjell Jansson (Stockholm U., Sweden) Fiber-Reinforced Biocomposites for Dental Restoration Applications Qing Cai, Xuegang Zhou, Yanan Li, Yanyang Yang, Yan Li, Xiaoping YANG (Beijing U.Chem.Tech., China) keynote Modification of Graphene and its Functional Polymer Nanocomposites Zhongzhen YU (BUCT, Beijing) Some New Results on Science and Technology of Elastomeric Polymer Nanocomposites Liqun ZHANG, Youping Wu, Yiqing Wang, Jun Liu (BUCT, Beijing, China)

.

BIO COMPOSITES, Natural Materials Preparation And Characterization Of Vietnamese Refined Cashew Nut Shell Liquid Hai-Binh Nguyen, Thanh-Phong Vo (VAST, Hanoi, Vietnam), New Segmentation Method for DNA Arrays Yuan CHENG, Weizhong Dai, Andrei Paun, Mihaela Paun (Louisiana Tech., Ruston) Wed-Thurs Identification Of Acinetobacter Bacteria Producing Magnetic Nanoparticles In Thailand Sutthiluck KWANTRAIRAT (Khon Kaen U., Thailand), Sineenat Siri (Suranaree U.T., Thailand) Degradability Of Injectable Hydoxyapatite / Collagen Nanocomposite Masanori KIKUCHI (NIMS,Tsukuba, Japan), Akinori Kochi, Yuki Shirosaki, Satoshi Hayakawa, Akiyoshi Osaka (Okayama U., Japan) invited Micelles Enhance In Vitro Absorbability Of Flavonols – Kaempferol, Myricetin And Isorhamnetin P. Sadananda MAIYA, D. Suresh (Tumkur U., Karnataka, India) Evaluation Of Blast Mitigation Strategies For Traumatic Brain Injury Shailesh GANPULE, Yi Hua, Linxia Gu, Namas Chandra (U. Nebraska-Lincoln) Soybean Oil Based Bio-Renewable Nanocomposites Sungho YOON, Chan-Gyu Kim (Kumoh Nat.Inst.Tech., Gumi, S. Korea), Michael R. Kessler (Iowa St.U. Ames) A Novel Ecological Heat-Insulating Composite Of Steam Exploded Biomass M. ANDZS (Latvia U. Agriculture, Jelgava), J. Gravitis (Latvian St.Inst Wood Chem.), J. Abolins (U. Latvia) New Generation Of Rare Earth-Doped Quantum Dots As Markers Of Intra-Cellular Absorption And Trafficking Michał M. GODLEWSKI, Mikołaj A. Gralak (Warsaw U. Life Sci, Poland), Helena Nevalainen (Macquarie U., Sydney, Australia), Romuald Zabielski (Warsaw U Life Sci.), Marek Godlewski (Warsaw, Poland) Single-Molecule Protein Detection Using An Aptamer-Integrated Nanopore Sensor Insoon Kang, Ji Wook Shim, Liqun GU (U. Missouri-Columbia) Plazma Synthesis Of Low Cytotoxic Magnetic Nanoparticles Encapsulated In Carbon Shells For Cancer Therapy Liliang CHEN, Emil Omurzak, Tsutomu Mashimo (Kumamoto U., Japan) The Effects Of Small System On The Type I Antifreeze Protein HPLC-6 Lifen LI (North China Inst. Sci Tech., Beijing, China), Xixia Liang (Inner Mongolia U., Hohhot, China), Zhuang Yun-fei (North China Inst Sci Tech.)

Bio-Functionalized Surfaces For Bio-Fouling And Bacterial Infections Jun F. LIANG, Christian Traba, Jin Woo Park, Henry Du (Stevens I.T., Hoboken, NJ) Synthesis And Characterization Of Biodegradable Elastomers Through Photo-Crosslinking StarAcrylated-Poly(Ε-Caprolactone-Co-Lactide-Co-Glycolide) Gary C.P. TSUI (Hong Kong Poly, China), Z.G. Sun (Hubei U., Wuhan, China), C.Y. Tang (Hong Kong Poly.U.), Y.K. Yang (Hubei U.), D.Z. Chen (Shenzhen U., China), Harry S.L. Ku (U. Southern Queensland, Australia) Tuesday Dental Enamels: the Composite Fivefold Nanostructure and its Quantum Dynamic Properties VanTri NGUYEN (Hanoi U. Sci.Tech., Vietnam) Fiber Surface Treatment And Its Effect On Strength Of Banana/Epoxy Composites A.Elayaperumal, N. VENKATESHWARAN, Arun Sundara Nayagam (Anna U., Chennai, India) Self-Sterilizing Wound Healing Membrane Sumit LAL, Jyoti Verma, Allan Easteal (U. Auckland, New Zealand) Injection Moulding Of Cocrmo Alloy Powder For Potential Orthopedic Applications Mohd A.OMAR, N.Abdullah, N.Roslani, N. Zainon (AMREC, Sirim Berhad, Malaysia), A.H.Zulkifly (IIUM, Kuantan, Malaysia)

CHEMISTRY of COMPOSITES Chemical Bond Interactions Between Covalently Functionalized Carbon Nanotubes By Esterification, Anhydridation And Amidization: Ab Initio Study Bessem Ben Doudou, Jun CHEN, Alexandre Vivet, Christophe Poîlane (IUT d’Alencon, Damigny, France) Gelation And Vitrification Of Epoxy/ Organophilic Montmorillonites Cured With A Diamine Clara M. GOMEZ (U. Valencia, Spain), Lorena Solar (Valencia, Spain), Paula Felix (U. Valencia) Soluble Dendrimer Functionalized Carbon Nanotubes And Its Dispersion In Silica Matrix Milton Jackson, Leah Mitchel, and Aderemi OKI (Prairie View A&M U., TX) Testing The Universality Aspects Of Charge Transport Across Disordered Oxide Layers Mikhail BELOGOLOVSKII (Donetsk Inst.Phy, Ukraine), Vincenzo Lacquaniti (Turin, Italy), Tamio Endo (Mie U., Japan) Examination Of The Loss Of Mechanical Properties Due To Biodegradation Effects Of Polyvinyl Alchol-Starch Blends Chong-Yu LOW, Seng-Xin Goh, Lee Tin-Sin, Tiam-Ting Tee, Soo-Tueen Bee (UTAR, Kuala Lumpur, Malaysia), David Hui (U. New Orleans), Qinghong Fang (Shenyang U.Chem.Tech., China), Ing Kong (RMIT, Melbourne, Australia) Rates Of Degradation For Polylactic Acid/Starch Blends With And Without Addition Of Microbes Tiam-Ting Tee, Tin-Sin Lee, Soo-Tueen Bee, Chong-Yu Low, Alvin Wan Siang Lee (UTAR, Kuala Lumpur, Malaysia), David Hui (U. New Orleans), Qinghong Fang (Shenyang U. Chem Tech., China), Ing Kong (RMIT, Melbourne, Australia) The Effect Of Coupling Agents On The Mechanical Properties Of The Carbon Fiber Reinforced

Polypropylene Composites SongHee HAN, Hyun Ju Oh, Hyun Chul Lee, Seong Su Kim (Chonbuk Nat. U., Jeonju, S. Korea) Tues Wed The Synthesis of Cu(CuO)/Single Walled Carbon Nanotubes Composite By Electro-Deposition And The Study On Its Sensitive Gas Discrimination to NO Hongmei BI, Ying Liang (Heilongjiang Bayi Agricul.U., Daqing, China), Keying Shi (Heilongjiang U., Harbin, China) Morphology and Microstructrure of Aggregates and Gelation Behavior of P3HT/PCBM Composites in Xylene Solutions Chien-Yi LEE, Ching-Iuan Su (Nat Taiwan U. Sci Tech, Tapei), Lung-Chuan Chen, Jean-Hong Chen (Kun Shan U., Tainan Niobium Surface Studies after HF-free Electrochemical Treatment Tadeusz Hryniewicz, Krzysztof Rokosz (Polit Koszalin, Poland), Jan Valicek (TU Ostrava, Czech Rep.), H.R. Zschommler Sandim (U. Sao Paulo, Brazil), Steinar Raaen (NTNU Trondheim, Norway) Effect Of Impact Modifier On The Mechanical Properties Of Polytrimethylene Terephthalate (PTT) Pravin R. GAIKWAD, P.A.Mahanwar, A.C. Rao (Deemed U., Mumbai, India) Effect Of The Processing Of Injection Molded Stainless Steel Fiber Filled-Polymer Composite On Microstructure And Resistivity Jianxiu Liu, Aiyun JIANG, Jingchao Zou, Baofeng Zhang, Haihong Wu (Huanghe Sci Tech. Coll., Zhengzhou, China)

Preparation and Characterization of PGMA Grafted MWNTs Prepared by In-situ ATRP Guang Yang, Wusheng Li, Xiaolong Jia, Xiaoping Yang (OIC-BUCT, Beijing, China) Binder-Free Electrospun LiFePO4/CNF Composite Cathode Material for Lithium-Ion Batteries Xiaodong Yan, Xiaolong Jia, Xiaoping Yang (OIC-BUCT, Beijing, China) Effect Of Silica Nanoparticle Loaded Multi-Walled Carbon Nanotubes On Interface Adhesion In Glass Fiber/Epoxy Composites Baiyang Liu, G. Li, X.L. Jia, P. Li, X.P. Yang (OIC-BUCT, Beijing, China) Morphology Evolution And Biological Activity Of Bioglass Nanoparticles Loaded Carbon Nanofiber Lijuan Guo, Tianhong Tang, Cuihua Zhang, Xiaolong Jia, Qing Cai, Xiaoping Yang (OIC-BUCT, Beijing, China) Thermal And Bonding Properties Of EPDM-Based Composites ZiGao Zeng, Junyi Zheng, Xiaolong Jia, Xiaoping Yang (OIC-BUCT, Beijing, China)

Materials Chemistry Symposium Chair: Dr. Yoshinobu Nakamura, Tokyo U., Japan Co-Chair: Dr.Chaoyang Li, Kochi U. Tech., Japan; Co-chair: Dr: Ray-Hua Horng, National Chung Hsing U., Taiwan) Growth Of High Temperature Cuprate Supercondcutors Based Heterostructures Kazuhiro ENDO (Kanazawa I.T., Japan), Petre Badica (NIMP, Bucharest, Romania), Hiroshi Kezuka (Tokyo U.T., Japan), Shunichi Arisawa (NIMS, Tsukuba, Japan), Tamio Endo (Mie U., Japan) Strain-tunable Band Gap Of ZnS Monolayer In Graphene-like Planar Structure Harihar BEHERA, Gautam Mukhopadhyay (Indian Inst.Tech., Bombay) Fabrication, Characterization and Antibacterial Properties of a Novel Ag/Graphene Composite Baojiang JIANG, Chungui Tian, Honggang Fu (Heilongjiang U. Harbin, China)

Relation Of Short-Range Order And Thermodynamic Data in Li-Sn Alloys Stepan Mudry (Ivan Franko N.U., Lviv, Ukraine), Andriy YAKYMOVYCH, Herbert Ipser Synthesis And Characterization of PANDB/χ-Al2O3 Conductive Core-Shell Composites Cheng-Ho CHEN, Yi-Ting Kan, Ching-Feng Mao, Ching-Dong Hsieh, Wei-Tung Liao (Southern Taiwan U., Tainan) Tues, Wed Fermi Level Shift Of Polycrystalline ITO And Amorphous IZO Thin Films Junjun JIA, Aiko Takasaki, Nobuto Oka, Yuzo Shigesato (Aoyama Gakuin U., Kanagawa, Japan) Prediction Of Young’s Moduli For Polymer Nanocomposites With Effective Clay Clusters Qinghua ZENG (U.Western Sydney, Australia), Wen Xu, Aibing Yu (U. New South Wales, Australia) Microstructure Of Portland Cement Paste With Nano-TiO2 Particles Chunwei GONG, Yunzhe Zhu, Jing Zhong b, Decheng Feng, Ning Xie (Harbin I.T., China) Pulsed Plasma Synthesis of Nickel Nanorod and its Surface Morphology Soemsak YOOYEN, Takahiro Kawamura, Shigeo Kotake, Yasuyuki Suzuki (Mie U., Japan) Phage-Templated Materials: Sensing, Imaging And Beyond Liaohai CHEN (Utah St.U., Logan) Hardness And Nanohardness Measurements Of Titanium Biomaterial After Magnetoelectropolishing Tadeusz HRYNIEWICZ (Polit Koszalin, Poland), J. Valicek (TU Ostrave, Czech Re.), R. Rokicki (Electrobright, Macungie, PA), K. Rokosz (Polit Koszalin) Preparation Of Water Dispersible Graphene By Covalent Functionalization Of Graphene Oxide Using Polyethyleneimine Hongyu LIU (Chonbuk N.U., S. Korea and Henan U. Sci Tech., China), R. Rajasekar, Tapas Kuila (Chonbuk N.U.), Yu Qing Zhang (Henan U.S.T.), JoongHee Lee (Chonbuk N.U., S. Korea) Use Material On The Basis Of Monocrystals Dioxide Zirconium In Hybrid Bearings Maxim PUGACHEV, Gennady Moskvitin, Askold Melshanov, Aleksandr Polykov (Inst. Machine Sci. of Ras, Moscow, Russia) Effect of Ti on The Pyrolysis Process Of Silicon Oxycarbide Materials J.L. OTEO, A. Tamayo, R. Rubio, J. Rubio (Inst Ceramica Vidrio, Madrid, Spain) Effect of Polycarbonate (PC) and Plasticizer On The Performance Characteristics Of Mixed Plastics Obtained From Waste Electrical And Electronic Equipment (WEEE) Sauravendra KS Tomar, Manoranjan Biswal, Smita MOHANTY , S. K. Nayak (Central Inst Plastic Eng.Tech., Odisha, India) Preparation And Characterization Of PPY/ Thermal Exfoliated Graphene Composites By Emulsion Polymerization Yinan YAN, Tapas Kuila, Nam Hoon Kim, Joong Hee Lee (Chonbuk N.U., Jeonju, S. Korea) Conjugation of a 19F Imaging Tracer to Serum Albumin: Synthesis and 19F NMR Evaluation Xuyi Yue, Y. Bruce YU (U. Maryland) Wed-Thurs SLS 3d Impression Using Polymer/Ceramic Mixture To Produce Material Pososity Robinson C.D. CRUZ, Angelo P. Titton (U. Caxias Sul, Brazil), Marcelo F Oliveira, Jorge V.L. Silva, Izaque A. Maia (Renato Archer Campus, Brazil), Carlos A. Costa (U. Caxias Sul) MgB2 Composites Obtained by Spark Plasma Sintering P. BADICA, G. Aldica, D. Batalu (Nat.Inst.Mat Phys, Magurele, Romania) Organic And Inorganic Hybrid For Solar Application Jr-Hau HE (Nat. Taiwan U.) waiting Artificial Pinning Center Technology To Enhance Flux Pinning In High-Tc Superconductors K. MATSUMOTO (Kyushu I.T., Japan) waiting Plasma Irradiated PET Surface Analyzed by FTIR Spectrum (Invited Talk)

Miyoshi YOKURA (Mie U., Adwel R&D Co., Ltd. Japan), Kazuya Hanada (Mie U. Japan), Kenichi Uehara (Adwel R&D Co., Ltd. Japan), Masatsugu Nagashima (Stech Co., Ltd., Japan) Hiroaki Nishikawa (Kinki U., Japan), Yoshinobu Nakamura(Tokyo U.), Kazuhiro Endo (Kanazawa Inst. Tech.Japan), Tamio Endo (Mie U., Japan) waiting

ENERGY MATERIALS Enhanced Light Harvesting in Dye-Sensitized Solar Cells by Coupling to a Titania Nanotube Based Photonic Crystal Haitao HUANG, Min Guo, Zhehui Yong, Jia Lin, Keyu Xie, Yu Wang, Limin Zhou (Hong Kong Poly U., China) The Outcome Of The Isos-3 Inter-Laboratory Collaboration – Characterization Of Degradation Pathways Occurring In A Variety Of Organic Photovoltaic Devices Birgitta ANDREASEN, David M. Tanenbaum (TU Denmark, Roskilde), Martin Hermenau (TU Dresden, Germany), Eszter Voroshazi (U. Leuven, Belgium), Matthew T. Loyd (Golden, Colorado), Yulia Galagan, Birger Zimmernann, Suleyman Kudret, Wouter Maes, Laurence Lutsen, Dirk Vanderzande, Uli Wuerfel, Ronn Andriessen, Roland Rösch, Harald Hoppe, Gerardo Teran-Escobar, Monica Lira-Cantu, Agnès Rivaton, Gulsah Y. Uzunoglu, David Germack, Markus Hösel, Henrik F. Dam, Mikkel Jorgensen, Suren A. Gevorgyan, Morten V. Madsen, Eva Bundgaard, Frederik C. Krebsa, Kion Norrmana Investigation Of The Effect Of Wind Strike On Wind Turbine Blade Of Composite Material S.K. AGRAWAL, Er. Mihir Kumar Pandey, Dr.K.M.Gupta (Allahabad, India) The Preparation Of Graphene Film By Electroplating And Its Application As Anode In Organic Solar Cells Huafeng Sun (Beijing Jiaotong U.,China), Peng Liu (Beijing Inst Tech., China), Linzhuo Wang, Shengjie Yang (Beijing Jiaotong U.), Shengyi YANG (Beijing Inst Tech.) Self-Assembly Functional Materials For Electronics And Energy Applications Ye Zhou, Su-Ting Han, Zong-Xiang Xu, Vellaisamy A.L. ROY (City U., Hong Kong, SAR) Tues-Wed Design And Experimental Study Of The Vanadium Redox Flow Battery Cathode Electrolyte Additives Chun YANG, Shubo Wang, Xiaofeng Xie, Jinhai Wang, Zongqiang Mao (Tsinghua U., Beijing, China) Carbon Fiber Supported - Silicon Nanowires as the Anode in Li-ion Batteries Z. Yao, H. HUANG (Wright St.U., Dayton, OH) Optoelectric Characterization Of Defects In Solar Cells Pavel Skarvada, Dinara S. Dallaeva, Robert Macků, Lubomír Grmela, Pavel TOMÁNEK (Brno U.T. Czech Rep.) Development of Zn0.9Al0.02O/CA3Co4O9 Module for Thermoelectric Power Generation Paolo MELE (Hiroshima U., Japan), H. Yasumune, H. Kamei, M. Uemitsu, K. Matsumoto, K. Miyazaki (Kyushu I.T., Japan) INVITED 23 min Tailoring Titania Nanostructures for Solar Cell Applications Peter MUELLER-Buschbaum, Monika Rawolle, Martin A. Niedermeier, Kuhu Sarkar, Jan Perlich (Hamburg, Germany), Philipp Lellig (Max Planck Mainz), Jochen S. Gutmann (U. Duisburg-Essen) Experimental Results Of An Asynchronous Machine With Thermoelectric Cooling Modules Rupert GOUWS, Heino VanJaarsveldt (North-West U., South Africa)

Mechanical Properties of Biodegradable Epoxy Nanocomposites Reinforced with Fluorinated CNT Yoon-Ji YIM, Hak-Yong Kim (Chonbuk N.U., Jeonju, S. Korea), Min-Kang Seo, Soo-Jin Park (Inha U., Incheon, S. Korea)

2nd Special Symposium on

Novel catalyst and Support Materials for Fuel Cells Chair: Dr. Petra Bele (TU Munich, Germany) Fuel Cells Materials X.P. QUI (Tsingua U., Beijing, China) invited 30min Multiscale Molecular Modeling And Experimental Investigation Of Polypyrrole-Carbon Nanotubes Composite Materials Luisa Pilan, Matei Raicopol, Andreea Madalina Pandele, Mariana IONITA (U. Politech Bucharest, Romania) Preparation Of Water Dispersible Functionalized Graphene Using A Novel Aryl Diazonum Salt Dong Sheng YU (Chonbuk N.U., and Luoyang Inst Sci Tech, China), Tapas Kuila, Nam Hoon Kim, Joong Hee Lee (Chonbuk N.U., Jeonbuk, S. Korea) Preparation and Characterization of Ionic Liquid/ POSS/ ABPBI Nanocomposite Fuel Cell Membranes Fan ZHANG, Xujin Bao, Mengyao Huang, Mathew Wheeldon (Loughborough U., UK) Carbon Composite Electrodes For Energy Storage Devices And Fuel Cells Jim P. ZHENG, Mei Zhang, Wanjun Cao, Wei Zhu, Richard Liang, Guoqing Zhang (Florida A&M U., Florida St.U., Tallahassee) Preparation and Characterization of Coal Tar Pitch-based Carbon Fibers Gun JUNG, Changwoon Nah (Chonbuk N.U., Jeonju, S. Korea), Min-Kang Seo (Jeonju Insts.Mach Carbon Comp, S. Korea), Soo-Jin Park (Inha U., Incheon, S. Korea) Effect of Fluorination on Electrochemical Performance of Coal Tar Pitch-based Activated Carbons for EDLC Ji-Hoon HUH, Hak-Yong Kim (Chonbuk N.U., Jeonju, S. Korea), Min-Kang Seo (Jeonji Inst Mach Carbon Comp., S. Korea), Soo-Jin Park (Inha U., Incheon, S. Korea) Preparation And Characterization Of Activated Microporous Carbons For Hydrogen Storage Capacity Seul-Yi Lee, Soo-Jin PARK (Inha U., Incheon, S. Korea) Polyethyleneimine Modified Graphene Nanosheets for CO2 Capture Long-Yue MENG, Soo-Jin Park (Inha U., Incheon, S. Korea) The Studying Of Catalyst Nature Influence On The Nanocarbon Structure Produced By Carbon Monoxide Disproportionation Irina KULISH, Nikolay Kolesnik (Zaporozhye St. Engrg., Ukraine), Oleg Prilutsky (Ofakim, Israel) Structural And Electronic Properties Of Graphene And Graphene-Like Materials Gautam MUKHOPADHYAY, Harihar Behera (Indiana Inst.Tech. Mumbai) Numerical Modeling Of Carbon Nanotube Structures Ante AGIC, Veljko Filipan (U. Zagreb, Croatia) Vibrational Frequencies And Raman Radial Breathing Modes Of Multi-Walled Carbon Nanotubes Based On Continuum Mechanics Toshiaki NATSUKi, Qing-Qing Ni (Shinshu U., Nagano, Japan) Linear Elasticity Of Single-Walled Nanotubes Aliaksandr AKAVITY (Belarusian St.U., Belarus) How To Manage Nanomaterials Safety In Research Environment? Amela Groso (Ecole Polytech, Lausanne, Switzerland), Alke Petri-Fink (U. Fribourg, Switzerland), Arnaud Magrez, Michael Riediker (Lausanne), Thierry MEYER (Ecole Polytech.

Lausanne, Switzerland) Low Temperature Ferromagnetic Cobalt Boride Nanocomposites As Catalysts For Hydrogen Production V.I. SIMAGINA, А.М. Ozerova, О.V. Komova, О.V. Netskina, G.V. Odegova (Boreskov Inst, Novosibirsk, Russia,, D.G. Kellerman (Inst Solid State Chem., Ekaterinburg, Russia) Electrochemical Properties of Li2MnSiO4/C Nanocomposite Prepared By Sol-Gel Method Shuangke LIU, Jing Xu, Kai Xie (Nat. U. Def. Tech., Chansha, Hunan, China) Mesostructural Catalysts For Simultaneous Production Of Hydrogen And Carbon Nanotubes Jin-An Wang, L.F. Chen, R. Sotelo (ESIQIE, Mexico City) Synthesis of Ag and PdAg Nanoparticles in CO2-Expanded Liquid Hui-Hsien Wei, Hsien-Te Hsieh and Chung-Sung TAN (Nat. Tsing Hua U., Hsinchu) Effect Of Carbon Matrix On Mechanical Property Of Fast-Carbonized Carbon-Carbon Composite Chien-Ping JU, M.H. Sun, H.Y. Lin (Nat. Cheng Kung U., Tainan), K.J. Lee (I-Shou U., Kaohsiung), J.H. Chern Lin (Nat. Cheng Kung U.) A Novel Core-Shell Structured Catalysts For Proton Exchange Membrane Fuel Cells Mingchuan Luo, Hong Zhu, Fanghui Wang, Shuo Zhang, Lingli Wei (OIC-BUCT, Beijing, China) A Study of Urea/Graphite Oxide Composites for Hydrogen Storage Behaviors Seul-Yi LEE, Soo-Jin Park (Inha U., Incheon, S. Korea) Synthesis and Characterization Of Polyimide-Carbon Nanotube Composites Naidu V. SEETALA, Cassandra R. Hendon, Naeem Tull-Walker (Granbling St.U., LA), Johan Van Behr, Barry Hester (Southern U., Shreveport, Louisiana), Marisabel Lebron-Colon, Michael A. Meador (NASA Glenn, OH) Evaluation of Viability of Sulfonated Polyetheretherketone Membranes for Fuel Cell Application Arvind Gupta, Lakshmi Unnikrishnan, Smita Mohanty, S K Nayak (CIPET, Bhubaneswar, India) waiting Growth Of Copper Nanoparticles On Multi-Walled Carbon Nanotubes Dan CHEN (Southwest Jiaotong U., Chengdu,China) waiting

GENERAL APPLICATIONS or PROCESSING Development Of Innovative Super High-Pressure Hydrogen Composite Tank Using Clay Nanoparticles As Gas Barrier Layer Mutsuya YAMAMOTO (Hiroshima, Japan), Koichi Yonemoto, Takaaki Matsumoto (Kyushu I.T., Japan), Yoshikuni Yoshimitsu, Kanji Hanaoka, Masao Nakano, Futoshi Shohara (Hiroshima,Japan) Synthesis Of Mesoporous Materials And Their Applications In Fuels Production Lifang CHEN, J.A. Wang (ESIQIE, Zacatenco, Mexico), L.E. Norena (U. Auto Metropolitana, Mexico) Thermal Conductive and Electrical Insulative Novel Epoxy Composites with Alumina Coated Multi-Walled Carbon Nanotubes Kuan-Ku Ho, Min-Chien Hsiao, Chen-Chi M. Ma (Tsing Hua U., Hsinchu) MISTCVD for the Semiconductor Processing

Tokiyoshi KAWAHARAMURU, (Kochi U. Tech., Japan) Invited 30 min, Tuesday Nanomodified Pastes For Earth Block Surface Protection Ioanna Papayianni, Maria Stefanidou (Aristotle U. Thessaloniki, Greece) Nano-Modified Grouts For The Consolidation Of The Surface Layers Of Historic Mortars Ioanna Papayianni, Vasiliki Pachta, Maria Stefanidou (Aristotle U. Thessaloniki, Greece) Impedance Spectroscopy Of Vanadium-Modified BaBi2Nb2O9 Ceramics Agata LISINSKA-Czekaj, M. Adamczyk, L. Kozielski, D. Czekaj (U. Sliesia, Poland) Application Of Aurivillius – Type Ceramics For Fabrication Of Pressure Sensors Lucjan KOZIELSKi, M. Adamczyk, A. Lisińska-Czekaj, D. Czekaj (U. Silesia, Poland) Electrothermal Convection In A Rotating Dielectric Fluid Layer: Effect Of Nonuniform Temperature Gradients Deepa K. NAIR (KNS Inst.Tech., Bangalore, India), Potluri Geetha Vani (BMS Coll Engr., Bangalore), I.S. Shivakumara (Bangalore U., India) Tues-Wed Ultrasonic Phased Array Inspection of Composites using a Velocity Variation Compensation (VVC) Method Dawei YAN, Ben Wright (TWI, Port Talbot, UK) Wed-Thurs High-Speed Superplastic Flow At Low Temperatures In Amorphous And Nanocrystalline Ceramics Hiroshi KIMURA (Nat. Def Acad, Yokosuka) Tues-Wed Cyclic Oxidation of TiCrN Coatings Yeon-Sang HWANG, Min-Jung Kim, Sung-Jun Bong, Dong-Bok Lee (Sungkyunkwan U., Suwon, S. Korea) Tool Wear During Milling Laminated Carbon Fibre Reinforced Plastic M.K. Nor KHAIRUSSHIMA, C.H. Che Hassan, A.G. Jaharah (Nat. U. Malaysia), A.K.M Amin (Int. Islam. U. Malaysia, Kuala Lumpur) Tues-Wed Mathematical Modeling Of The Process-Induced Deformation Considering Compaction Effect Tae-Hoon SONG, Chun-Gon Kim, Hong-Kyu Jang, Won-Ho Choi, Jae-Hwan Shin, Jin-Kyu Kim (KAIST, Daejeon, S. Korea), Kyung-Jin Jung (Daejeon, S. Korea) Surface Deposition And Characterization Of A 3-D Photoanode For DSSC Applications Fareed DAWAN, Yoonyoung Jin (Louisiana St.U.), Eyassu Woldesenbet (Southern U., Baton Rouge) Investigation On The Mechanical Properties Of Clay/Epoxy Nanocomposite Using Nanoindentation Sungrok HA, KyongYop Rhee (Kyung Hee U., Yongin, S. Korea) Flexural Properties Of Moisture-Absorbed Basalt/CNT/Epoxy Composites Man Tae KIM (Gumi Electronics, S. Korea), Kyong Yop Rhee (Kyung Hee U., Yongin, S. Korea) Plasma Treatment of PP to Improve The Bonding Strength of PP/Aluminum Composites Ja Ho KU, Kyong Yop Rhee (Kyung Hee U., Yongin, S. Korea) Directional Solidification And Vacuum Melting Purified Solar Grade Polysilicon Hui QIU, Jian-Xiu LIU, Xin-xing Ban (Zhengzhou U. Light Ind., China) The Mechanical And Wear Properties Of Ti50Cu28Ni15Sn7 Bulk Metallic Glass Composites Containing Carbon Particles Pee-Yew LEE (Nat. Taiwan Ocan U., Keelung) Monolith Silica Membrane For Hydrogen Separation Yunfeng Gu, Joel Clinton, Curtis Fekety, Zhen Song (Corning Inc. Corning, NY) Triple-Layer Structure Synthesis of ZnS/ZnS:Mn/SiO2 for Improved Phosphor Wentao Zhang, Hong-Ro LEE (Chungnam Nat. U., Daejeon, S. Korea) The Influence Of Low Pressure Injection Molding Process Parameters On Ceramics Disks Geometry Carlos A. COSTA, Angelo P. Titton, Felipe M. Pasquali, Robinson C. D. Cruz (U. Caxias do Sul, Brazil) Modal Analysis of Passenger Car S.M. Darwish, Ahmad G. Bahgat King Saud U., S. Arabia)

Research Progress Of PCBN Material:A Review Xin-xing Ban, Lian-qing Ji, Hui QIU (Zhengzhou U. Light Ind., China) Modal Analysis of Passenger Car S.M. Darwish, Ahmad M.B. GEMEAL (King Saud U., S.Arabia) Theoretical And Numerical Solutions Of Maglev Train Induced Vibration Shen-Haw JU, C.C. Leong, Y.S. Ho (Nat. Cheng Kung U., Tainan) Influence of Wet Spinning Parameter And Post Heat Treatment on Crystalline Structure of Poly(vinylidene Fluoride) Seung Mi YU, Hyun Ju Oh, Seung Ah Song, Yong Sik Chung, Seong Su Kim (Chonbuk Nat. U., Jeonju, S. Korea) Tues-Wed Silver Nanoparticles Enhanced Surface Plasmon Resonance Phase-Interrogation Biosensor Tzu-Cheih Peng, Chih-Wei Chen, Wen-Chi Lin (Nat. Taiwan Ocean U., Keelung), Din Ping Tsai, Hai-Pang CHIANG (Nat App Res Lab, Hsinchu) Microwave Properties Of Carbon Nanotube/Microwire Multiscale Hybrid Composites Faxiang QIN, H.X. Peng (U. Bristol, UK), C. Brosseau (U. Brest, France), H. Wang, J.F. Sun (Harbin I.T., China) Review Of SMA Smart Composite Structure L. XU, Guoqing Yuan (Tongji U., Shanghai, China), David Hui (U. New Orleans) A New Process To Manufacture Cross-Linked Gelatin Microfibers Jyoti Verma, Sumit Lal, Allan Easteal (U. Auckland, New Zealand) Carbon Nanotube Field Effect Transistors Development and Perspectives Arezki BENFDILA, M. Berd, A. Lakhlef (U. M. Mammeri, Algeria) Raman Signal Enhancement Of Single Layer Graphene Sandwiched With Gold Nanoparticle Array System Potential For Biochemical Sensing Application Judy M. OBLIOSCA (Nat. Tsinghua U., Hsinchu), Teddy Tite, Lain-Jong Li (Acad Sinica, Taipei), Hung-Yao Chu, Pen-Cheng Wang, Fan-Gang Tseng (Nat. Tsinhua U., Hsinchu) Hybrid Nanomaterial Gas Sensors Junhong CHEN, Ganhua Lu (U. Wisconsin-Milwaukee) Invited 23 min Fabrication Porous Si3N4 Ceramics Via Camphene-Based Freeze-Casting Process Zhaoping HOU, Feng Ye, Limeng Liu, Qiang Liu (Harbin I.T., China) Hybrid Programming Of SMP Based Syntactic Foam Samuel I. IBEKWE (Southern U., Baton Rouge), Abe King (Louisiana St.U.), Guoqiang Li (SUBR, LSU) Reducing Potential Nanotoxicity Of Orthopaedic Implantable Devices Kris Chettiar, Mateen Arestu, Peter Smitham, Simon GRANGE (Alberta Bone and Joint Health Inst., Canada) Self-Healing Of Epoxy With Microcapsules Of Curing Agent Qi LI, Ananta Kumar Mishra, Nam Hoon Kim, Joong Hee Lee (Chonbuk Nat U., S. Korea) Reinforcement Materials for Extreme Large Wind Turbine Rotor Blades Georg ADOLPHS (Owens Corning Engineered Solutions, Brussels, Belgium) Manufacture of Environmental-friendly Plywood Bonded with HDPE Lu FANG, Liang Chang, Wen-jing Guo, Yong-ping Chen, Zheng Wang (Chinese Acad Forestry Beijing, China) Investigation of the Thermal Contact Resistance in Thermosetting Pultrution Process Ismet BARAN, Cem C. Tutum, Jesper H. Hattel (TU Denmark, Lyngby) Photocatalytic Degradation Of NOx Using Al2O3/TiO2/Ha Nanostructure Composite Filters Mojtaba NASR-Esfahani, Sahar Fekri (Islamic Azad U., Irana) chair Nanostructured Cu/V Nanolayers With Enhanced Radiation Tolerance Xinghang ZHANG (Texas A&M U., Coll Stn), E.G. Fu, Nan Li, A. Misra, Y-Q. Wang (Los Alamos Nat Lab., NM), L. Shao, H. Wang (Texas A&M U.) Multiplexed Reconfigurable Biomarker Detection Using Solid-Liquid Phase Change

Nanoparticles Chaoming WANG, Liyuan Ma, Ming Su (U. Cen Florida, Orlando) Compositional Dependence of Microstructure in Alkali Niobate Lead-Free Ceramics Prepared by Conventional Mixed Oxide Method M.R. SAERI (Shahrekord U., Iran), A. Barzegar (Shiraz U.), H. Ahmadi Moghadam (Shahrekord U.) Mechanochemical Route Of Perovskite-Like Composite Materials Preparation Lyubov ISUPOVA, Larisa Pinaeva, Dmitrii Ivanov, Irina Yakovleva (Boreskov Inst, Novosibirsk, Russia) Flexible Gas Sensor Array with an Embedded Heater Based in Metal Decorated Carbon Nanofibres S. CLARAMUNT, O. Monereo, M. Boix, R. Leghrib, J. Daniel Prades, A.Cornet (U. Barcelona, Spain), P. Merino, C. Merino (Burgos, Spain), A. Cirera (U. Barcelona) Future Design Of Composite Launcher Structures Richard DEGENHARDT (DLR, Braunschweig, Germany) Dynamic Analysis Of Modified Composite Helicopter Blade Bosko RASUO, Mirko Dinulovic (U. Belgrade, Serbia) Multidisciplinary Design Optimization Of A Large Scale Hybrid Composite Wind Turbine Blade Structure Madhu N. NADIG, Sathya N. Gangadharan (Embry-Riddle Aero U., Daytona Beach, FL) Corrosion Behaviour Of Different Low Carbon Steel Pipelines For Natural Gas Installations (A Comparative Study) W.A. Gowayed (Mansoura U., Egypt), S.M. Abdou (Port Said U., Egypt), S. ABDEL RASSOL, A. Fouda (Mansoura U.), S.M. Samy (Port Said U.) Impact Energy of Aluminum Weldments Using Double Shoulder Friction Stir Welding M.A. Shahenda, Ebtisam F. Abdel-GWAD, Soher Samy (Port-Said U., Egypt) Paramagnetic Response of Helical Structure J. T. ZHU, X. Jian (Southwest Jiaotong U., Chengdu, China), J.H. Du (CAS, Shenyang, China), N, Li (Northwestern Poly U., Xi An), Z.W. Zhou (Southwest Jiaotong U., Chengdu) Structural Evolution Modeling Of Damage Accumulation Processes In Modern Metallic And Polimer Nanomaterials Valeriy V. LEPOV (RAS, Yakutsk, Russia) Energy Security And Technogenic Safety For The Northeast Of Russia Through The Smart Grid Technology Valeriy V. Lepov, Nikolay A. Petrov (RAS,Yakutsk, Russia) Synthesis Of Carbon Microcoil Using Ni Nanoparticles And The Growth Mechanism Study Xian JIAN, Dingchuan Wang, Junting Zhu, Zuowan Zhou, Jing Qiao (Southwest Jiaotong U., Chengdu, China) Preparation of Polyaniline/Graphite Composites and Their Microwave Absorbing Properties Xiangnan CHEN, Xin Tian, Shibu Zhu, Zuowan Zhou (Southwest Jiaotong U., Chengdu, China) Wed-Fri Fabrication Porous Si3N4 Ceramics Via Camphene-Based Freeze-Casting Process Zhaoping Hou, Feng Ye, Limeng Liu, Qiang Liu (Harbin I.T., China) Preparation of Continuous Si3N4 Reinforced 2024 Aluminum Alloys Composites By Pressure Infiltration Method Qiang Liu, Feng Ye, Shichao Liu, Zhaoping Hou, Biao Zhang (Harbin I.T., China) Effect Of Temperatures On The Microstructures And The Insulation Properties Of The Carbon Aerogels Haixia YANG, Feng Ye, Haijiao Zhang (Harbin I.T., China) Synthesis Of Silver/Polyaniline Microsperes By Freezing Polymerization And Its Gas Sensitivity Behavior Yu Gao, NaWang, Wenchi Han, Qinghong Fang, Feng Yang (Shenyang U.Chem. Tech., China)

Effect Of Nano-CaCo3 (Polymorph And Different Particle Size) On The Dynamic Mechanical Properties Of Filled Natural Rubber Qinghong Fang (Shenyang U.ChemTech., China), David Hui (U. New Orleans), Tiam-Ting Tee (UTAR, Malaysia), Ing Kong (RMIT, Australia) Effect Of Nano-CaCo3 (Polymorph And Different Particle Size) On The Dynamic Mechanical Properties Of Filled Natural Rubber Vulcanizate Qinghong Fang, Bo Song, Yu Gao, Caiyun Dai (Shenyang U.Chem.Tech., China), David Hui (U. New Orleans) Synergistic Effect of MCM-41 Nano-Filler On Intumescent Flame Retardant of NR Composites Na WANG, Jing Zhang, Qinghong Fang (Shenyang U.Chem.Tech.), David Hui (U. New Orleans) Performance Prediction For Mesh Reinforced Membrane Changguo Wang, Lei ZHANG, Zhenyong Du, Huifeng Tan (Harbin I.T., China) Preparation Of Nanozirconia Ceramic By Gelcasting Chen LIU, Xinghong Zhang, PingHu, Changqing Hong (Harbin I.T., China) A Damping Property Comparability Concerning Influencing Factors In CR/PVC And IIR/PVC Polymer Composites Kong-cheng ZUO, Zhang Lin, Xin-Biao Xiao (Tribology Res.Lab, SWJTU, Chengdu, China), David Hui (U.New Orleans), Minhao Zhu (SWJTU, Chengdu)

INFRASTRUCTURE COMPOSITES or WOOD A Phase Field Approach For Computing The Residual Thermal Stress Based On A Marcusson Model Yue HOU, Linbing Wang, Pengtao Yue (Virginia Tech.), Troy Pauli (Laramie, WY) Multiscale Failure Modeling Of Cement Concrete Using Finite Element Method And Molecular Dynamic Method Wenjuan SUN, Dong Wang, Ying Li, Linbing Wang (Virginia Tech.) Dimensional Accuracy Of Flange Width Of Flexible Channel Section-On Development Of Flexile Cold Roll Forming Machine Ihou Shou, Hiroshi ONA (Takushoku U., Japan) Load Response Of A Concrete Beam In Mixed-Mode Fracture Xiang GUO (Tianjin U., China), R.K.L. Su, B. Young (U. Hong Kong) An Improved Multi-Objective Model For Combined Location-Routing Problem In Hazardous Waste Recycling Logistics Jiahong ZHAO (Southwest Jiaotong U., Chengdu, China) Experimental Strengthening of Reinforced Concrete short Corbels by gluing Carbon Fibre Composite (CFC) Sheet Ivelina Ivanova, Jules ASSIH, Alex Li (U. Reims Champagne Ardenne, France), Dimitar Dontchev (U. Sofia, Bulgaria), Yves Delmas (Reims, France) Flexural Test and Analysis of SHCC and RC Composite Slabs Chang-Geun CHO (Chosun U., Gwangju, S. Lorea), Luciano Feo (U. Salerno, Italy), D. Hui (U. New Orleans) Cement-Bonded Cellulose Fiber Composites By Carbonation Yixin SHAO, Sam Wang (McGill U., Canada), Zhen He (Wuhan U., Canada) Geometric Effects To The Electrical Properties Of Cement Mortars Tsung-Chin HOU, Kow-Wei Wu (Nat. Cheng Kung U., Tainan) Finite Element Modeling Of Insulated Precast Concrete Sandwich Wall Panels Reinforced With GFRP Shear Grids Ho-Ryong KIM, JunHee Kim, Young-Chan You, Ki-Sun Choi (Korea Inst. Const. Tech., Gyeonggi), Young-il Seo (Midasit, Gyeonggi, S. Korea) Extruded Wood Plastic Composites With Pressure-Treated Wood Fibers Guangping Han, Yao Fei (Northeast Forestry U., Harbin), Qinglin Wu (Louisiana St.U.)

Effects Of Environmental Temperature On The Mechanical Properties Of Wood/MaleicAnhydride Grafted PP/Hdpe Blend Composites Weijun YANG, Yanjun Xie, Yan Cao, Haigang Wang, Qingwen Wang (Northeast Forestry U., Harbin, China) Experimental Testing Of Stirrup Effects On Compressive Strength Of Concrete Columns Jure Radnic, Radoslav MARKIC, Alen Harapin, Domagoj Matesan (U. Split, Croatia) Behavior and Modeling of Concrete Cylinders in Axial Compression Confined Using FRP Rings Eunsoo CHOI, Sunhee Park, Jinho Kim, Jaewon Lee (Hongik U., S. Korea) Polymer Concretes: A Description And Methods For Modification And Improvement Gonzalo MARTÍNEZ-Barrera (Auto U. St. Mexico, San Cayetano) Resonant Ultrasound Studies Of Steel-Polymer Composites Yun-Che WANG, Chun-Yi Wu, Chih-Chieh Lu (Nat. Cheng Kung U., Tainan), Chia-Min Wei, Cheng-Yen Wu (Kaohsiung) Current Studies Of Influencing Parameters On Failures Of Reinforced Concrete (RC) Beams Strengthened With Fiber Reinforced Polymers (FRPs) Young Hee KIM, Dori Kim, Hee Sun Kim (Ewha Womans U., Seoul, S. Korea) Cohesive Zone Modeling Approaches for Predicting Debonding Behaviors of FRPs used to Strengthen Reinforced Concrete Beams Hee Sun KIM, Young Hee Kim, Dori Kim, Nadia Utui (Ewha Woman’s U., Seoul, S. Korea), Eunsoo Choi (Hongik U., Seoul, S. Korea) Maturing Of Polymer Concrete Composites Igor SBARSKI, H. Haddad, A. Arora (Swinburne U.T., Victoria, Australia) Effects Of Fiber Size On The Creep Of Wood Fiber Plastic Composite Haibing Huang, Huhu Du，Xiaohui Yang, Weihong WANG (Northeast Forestry U. Harbin, China) Compression Behavior On Steel-Rock Composite Yunliang TAN, Lu Chen (Shandong U.Sci.Tech., Qingdao, China), D. Hui (U. New Orleans), Fenghai Yu (Shangdon U.Sci.Tech.) Nonlinear Finite Element Analysis Of Square Reinforced Concrete Plates Strengthened By Fiber Reinforced Plastics Cindrawaty LESMANA, Hsuan-Teh Hu, Fu-Ming Lin, Nan-Ming Huang (Nat. Cheng Kung U., Tainan) Design of Timber Glulam and LGL Beams with Perforations C Y ADAM, H.R. Milner (Monash U., Melbourne, Australia), Berhan M. Ahmed (U. Melbourne, Australia) Transport Properties Of Cement Mortar With Graphite Nanoplatelet Hongjian DU, Sze Dai Pang, Ser Tong Quek (Nat.U. Singapore) Extruded Wood Plastic Composites With Pressure-Treated Wood Fibers Guangping HAN (Northeast Forestry U. Harbin, China), Yao Fei, Qinglin Wu (Louisiana St.U.) Effect of Silane Structures on the Mechanical Properties of Wood/High Density Polyethylene Composites Yanjun XIE, Qingwen Wang, Chuntao Li (Northeast Forestry U., Harbin China) Flexural Strength Of Insulated Precast Concrete Wall Panels With Gfrp Grids JunHee KIM, Young-Chan You, Ki-Sun Choi, Ho-Ryong Kim (Korea Inst Const.Tech., Gyeonggi, S. Korea) Dimensional Accuracy Of Flange Width Of Flexible Channel Section-On Development Of Flexible Cold Roll Forming Machine Ihou Shou, Hiroshi ONA (Takushoku U., Tokyo, Japan) Integrity Assessment Of Thick Concrete Plates N. Dawood, H. MARZOUK (Ryerson U., Toronto, Canada) Research on Nonlinear Analysis of Squat and Slender RC Wall Using Different Macroscopic Models Jiuk SHIN, JunHee Kim, Young-Chan You, Ki-Sun Choi, Ho-Ryong Kim (Korea Inst. Construc. Tech.,KICT, Gyeonggi) A Composite Pavement Material with High Mechanical and Durability Properties for Roads and Airport Pavement Constructions Hassan Al NAGEIM,

Shakir Al-Busaltan, William Atherton, George sharpls (Liverpool John Moores U., UK) Analytical Estimation and Modeling of CFRP-Strengthed RC Beam-Column Joints Kien LE-TRUNG, Khoa Nguyen-Dang, Kihak Lee (Sejong U., Seoul, S. Korea) Waste Foundry Sand Reused As Clay Replacement For Tile Manufacture Deng-Fong Lin, Mei-Ling Chung, Huan-Lin LUO (I-Shou U., Kaohsiung), Mei-Yun Wang (Kaohsiung) Tues-Thurs Effect Of Oil Contaminated Clay On The Manufacture Of Geopolymer Materials Huan-Lin Luo, Yang-Sian Chen (I-Shou U., Kaohsiung), Show-Ing Shieh (She-Te U., Kaohsiung), Deng-Fong LIN (I-Shou U.) Tues-Thurs

MAGNETIC COMPOSITES or PHYSICS or THIN FILMS Graphene Nanosheets Deposited On The Hydrophilic Or Hydrophobic Surface Through Control Of The Ph Value For Use In Transparent, Conductive Films Chen-Chi M. MA, Hsi-Wen Tien, Yuan-Li Huang, Shin-Yi Yang, Sheng-Tsung Hsiao, Shin-Ming Li, Wei-Hao Liao, Yu-Sheng Wang, Jen-Yu Wang (Tsing Hua U., Hsinchu), Chorng H. Twu (Tainan U.T.) Lasing Based On Single Chlorine Doped CdS Nanoribbons Yucheng DONG, Y. K. Liu, J. A. Zapien (City U. Hong Kong, SAR, China) OLED Devices with PEDOT: PSS / CNT Composite Thin Film as HIL Layer and Properties Sung Hoon KIM, Deok Jae Hyeon, Jong Min Lee, Lee Soon Park (Kyungpook N.U., S.Korea) Hydrogenation-Initiated Scrolling Of Graphene Into Carbon Nanoscrolls Shuze Zhu, Teng LI (U. Maryland) Structure Engineering And Properties Of Tin Coatings By Oblique Angle Deposition Jae-In JEONG, Ji-Hoon Yang, Hye-Sun Park, Jae-Hun Jung, Min-A Song (Res. Inst. Ind Sci. Tech., Pohang, S. Korea) 3D Nano-Seeding Self-Assembly of Ferromagnetic Fe Dot Array-LaSrFeO4 Nano-Heterostructure, Koichi OKADA, Takuya Sakamoto, Kohei Fujiwara, Azusa N. Hattori, Teruo Kanki, Hidekazu Tanaka (Osaka U., Japan) invited Production Of Porous Gold Nanofilms, Nanobelts And Their Applications Renyun ZHANG, Magnus Hummelgård, Håkan Olin (mid Sweden U., Sundsvall) Quantum Dots-Based Solar Cells Liqiang Ren, Jingling Qiu, Shiren Wang (Texas Tech U., Lubbock) Conducting Material Structures with PMMA Polymer Optical Multifunctional Nano-Engineering Complexes K.K. Kamani, B.J Madu, R.K Rangaswami (PGC, Chitradurga, India) Mechanical Studies on Halloysite Nanotube (HNT)/Polyurethane (PU) Nano-composites Tayser Sumer Gaaz, M.N.M. Ansari (U. Tenaga National, Malaysia), Robert A. Shanks, Ing Kong (RMIT, Melbourne, Australia) Effect Of Carbon Nanotubes-Magnetite Content On Mechanical And Magnetic Properties Of Thermoplastic Natural Rubber Ing KONG, Robert Shanks (RMIT U., Australia), Sahrim Ahmad, Lih-Jiun Yu (UKM) Graphene in Poly(styrene-b-butadiene-b-styrene) Composites Michael CZAJKA, Ing Kong, Robert A. Shanks (RMIT U., Australia) Carrier Mediated Room Temperature Ferromagnetism in Nb Doped Anatase TiO2 Jiyong Yang, Y.L. Han, H. Zheng, P.H. Zhao, Jiacai NIE (Beijing Normal U., China) Optical And Electrical Study Of Few-Atomic-Layer Boron Nitride Sheets For Light Harvest

Application Muhammad Sajjad, Peter X. FENG (U. Puerto Rico) Photoluminescence Intensity Decay In Semiconductor Quantum Dots With Indirect Gap Karel KRAL, Miroslav Mensík (Acad Sci Czech Rep., Prague) Graphene Quantum Dots Derived From Multi-Wall Carbon Nanotubes Huafeng SUN (Beijing Jiaotong U., China), Li Zhang (Beijing Inst.Tech.), Shengjie Yang (Beijing Jiaotong U.), Jinquan Wei (Tsinghua U., Beijing), Shengyi Yang (Beijing Inst.Tech.) Nanocomposite High Anisotropy FePt Films For Ultra-High Density Magnetic Recording Jingsheng CHEN, G.M. Chow (Nat.U. Singapore) invited Wed-Thurs Effect Of The Processing Of Injection Molded Stainless Steel Fiber Filled-Polymer Composite On Microstructure And Resistivity Jianxiu Liu, Aiyun JIANG, Jingchao Zou, Baofeng Zhang, Haihong Wu (Huanghe Sci Tech. Coll., Zhengzhou, China) Preparation And Characterization Of Highly Transparent And Conductive Indium-Zinc Oxide Nanostructure Thin Films Deposited By Pyrolysis Spray Technique R. Dounia, M. ADDOU (U. Sultan Moulay Slimane, Morocco), J.C. Bernede (U. Nantes, France) Molecular Dynamics Simulation Of Ultrathin Lubricant Films Under Laser Heating Exposure Qiubo Chen, Bei Li, Chee How WONG (Nanyang T.U., Singapore) Activation Of Silicon Quantum Dots For Emission Wei-Qi Huang, Xin-Jian Miao a), Zhong-Mei Huang (Guizhou U., Guiyang, China), Shi-Rong Liu, Chao-Jian Qin (Inst.Geochem., CAS, Guiyang, China) Effect of Oxygen Precipitation in Annealed Electron Irradiated Czochralski Silicon Lili CAI (N.China Inst Sci Tech, Yanjiao, Beijing), Chen Guifeng (Hebei U.T., Tianjin, China) Characterization Of Blue Organic Light Emitting Diodes Made By Vacuum Evaporation Nang-Dinh NGUYEN, Duc-Cuong Nguyen, Ngoc-Chung Do, Thi-Thao Tran (Vietnam Nat. U., Hanoi) Transparent Magnetic Polymer Nanocomposites: Synthesis, Properies and Some Potential Applications Mingjun HU, Robert K. Y. Li (City U., Hong Kong, SAR) Comparison of Two Antiferromagnetic Phases of Fe Monolayer in LaOFeAs Huaiyu WANG (Tsinghua U., Beijing, China) First-Principle Calculation of Hybrid Conductive Nanowires Chengyu Yang, Quanfang CHEN (U. Cen Floria, Orlando) Effects of Substrate Temperature on Magnetostriction of Fe62Co19Ga19/Si(100) Films T.L. TSAI, C.C. Liu, S.U. Jen (Acad Sinica, Taipei), J.Y. Juang (Nat. Chiao Tung U., Hsinchu), P.C. Kuo (Nat Taiwan U., Taipei) Fabrication Of Polymer/Titania Hybrid Thin Films Via Low Temperature Sol-Gel Synthesis For Application In Photovoltaics Martin A. NIEDERMEIER (TU Munich, Germany), Monika Rawolle, Philipp Lellig, Volker Koerstgens, Eva M. Herzig, Adeline Buffet, Stephan V. Roth, Jochen S. Gutmann, Thomas Fröschl, Nicola Hüsing, Peter Müller-Buschbaum (Germany) Towards The Quantum Limits In Scaling Of Electronic Devices Waldemar NAWROCKI (Poznan U.T., Poland) Ta Capping and/or Barrier Layer Effect On Magnetostriction Of the Fe62Co19Ga19 Films S.U. JEN, T. L. Tsai, C. P. Chu (Acad Sinica, Taipei, ROC) Magnetic Structure Of Nanocrystallized Nickel Thin Films Electrodeposited On ITO Substrate L. Nzoghe-Mendome, Jean EBOTHE (U. Reims, France) invited 23 min, chair Quantum Discrete Breathers in Ferroelectrics in Klein-Gordon Lattice Arindam BISWAS (W.B. Univ.Tech., Dumkal, India), Bijoy Mandal (Durgapur, India),

Subhro Jyoti Mandal, Arghya Dey, Reshmi Basu, Kamal Choudhary, A.K. Bandyopadhyay (Dumkal, India), A.K. Bhattacharjee, D. Mandal (Durgapur)

MATHEMATICAL MODELING or MECHANICS The Use Of Statistical Process Control In Reducing Core Sheet Thickness Problem Of Composite Panel M. Iqbal HUSSAIN, Zuraidah Mohd Zain, Noorain binti Ahmad (U. Malaysis Perlis) Mechanical Behavior Of CNT-Reinforced Carbon/Carbon Composites Shinn-Shyong TZENG, Yu-Hon Lin (Tatung U., Taipei) Simulation Of Space Plasma And Hard Particle Impact On Polymer Nanocomposites Lev S. NOVIKOV, Ekaterina N. Voronina, Vladimir N. Chernik, Natalia P. Chirskaya, Maria S. Samokhina, Peijie Li (Lomonosov Moscow St.U.,Russia) A Plastic Constitutive Model For Fiber Composites With Different Properties In Tension And Compression Liang ZHU, Yi Xiao (Tongji U., Shanghai, China) Gradiently Anisotropic Conducting and Magnetic Polymer Composites J. ANELI, L. Nadareishvili, G. Mamniashvili, A. Akhalkatsi, G. Basilaia (Tbilisi, Gerorgia) Numerical Simulation Of Tensile Behavior Of Carbon Fiber/Carbon Nanotube/Pheonlic Composites Yiqi WANG (Changwon N.U., S. Korea), Joon-hyung Byun, Byung-sun Kim (KIMS, Changwon, S. Korea), Jung-il Song (Changwon N.U.) Shear Correction Factor for FGM Plates Based on Thickness Shear Vibration Hangyu CAO, Vai Pan Iu (U. Macau, SAR, China) Three-Dimensional Vibration Analysis Of Functionally Graded Material Plates Using Beam Functions And Chebyshev Polynomials Yizhi FANG, Vai Pan Iu (U. Macau, SAR, China) An Efficient Optimization Method for Composite Sandwich Structures Using Lamination Parameters in a Combined Gradient- and Evolution-based Algorithm Yueh-Yin HSIEH, Jung-Ho Cheng (Nat. Taiwan U., Taipei) Gradient Theory Of Nanoplates And Nanoshells Bohua SUN (Cape Peninsula U.T., S. Africa) Multi-Functional Bio-Inspired Graphene Based Composite Films Yuanqing Li, Kin LIAO (Khalifa U.Sci.Tech. Res., Abu Dhabi, UAE), Ting Yu (Nanyang T.U., Singapore) Viscoelastic Damping Properties Of Cups-Stacked Carbon Nanotubes (CSCNTS) Modified Epoxy Resin Composites Yan LIU, Ruifeng Li (Jilin U., Changchun, China), H.X. Peng (U. Bristol, UK) Influence Of Functionally Graded Plate On Bending Under Thermal Loads S. Natarajan (Indian Inst.Sci., Bangalore), M. Ganapathi (IES, Bangalore, India) Volumetric and DeviatoricWaves in ImpactedAlumina Plates Zhanfang LIU (Chongqing U., China) A General Nonlocal Nonlinear Theory For Composite Nano Beams In Buckling Samir A. EMAM (United Arab Emirates U., UAE) Bending Collapse Behavior of Aluminum-CFRP Hybrid Beam under Transverse Quasi-Static Loading Hee Chul Kim, Dong Kil Shin, Jung Ju LEE (KAIST, Daejeon, S. Korea) Wed-Thurs Optimum Operating Conditions Of Nano-Ceria Particles By Rapid Expansion of Supercritical Solution Method Pao-Chi CHEN, Mu-Hsuan Lin (Lunghwa U.Sci.Tech., Taoyuan) Multiscale Prediction Of Biaxial Failure Envelopes Of Composite Laminates Using Finite-Volume Micromechanics Zhanwen TANG (Harbin I.T., China), Boming Zhang (Beihang U., Beijing,

China), Wenqiong Tu, Marek-Jerzy Pindera (U. Virginia) Damage Mechanics Of Composite Materials Via Finite-Volume Micromechanics Wenqiong Tu (U. Virginia), Zhanwen Tang (Harbin I.T., China), Marek-Jerzy Pindera (U. Virginia) Molecular Dynamics Simulation Of Thermal-Desorption And Decomposition Of Lubricant Films Bei LI , Qiubo Chen, Chee How Wong (Nanyang T.U.) A Piezo-Elastodynamic Model For Guided Wave Generation And Propagation In Prestressed Plates Guoliang HUANG, F. Song (U. Arkansas, Little Rock) invited Estimation Of Mechanical Properties Of Nano-Layered Material Using Molecular Dynamics Simulation Takuya UEHARA, Masayuki Watanabe (Yamagata U., Japan) Tues-Wed Modal Analysis Of The Rear Module Of An Hybrid Bus With Composite Sandwich Panels Paulo C. NEVES, Antonio A. Fernandes (Inst Eng.Mecanica, IDMEC, Porto, Portugal) Design and Analysis of a Wing Structure with Static Aeroelastic Effect for Optimal Performance Zexu SUN (COMAC, Shanghai, China), Shijun Guo (Cranfield U., UK), Qiang Fu (COMAC, Shanghai, China) Computational Model Of Effective Fibers On Toughening In Fiber Reinforced Composites At An Early Stage Of Crack Formation Chong WANG, Leandro Ferreira Friedrich (Fed U. Pampa, Brazil) A 2D FEM Model To Show The Variation In Particle Distribution In A Functionally Graded Material With Random Distribution Of Particles K.K.S. MER (G.B. Pant Engrg.Coll., Uttarakhand, India) 3D Stress Analysis in Laminated FRP Composite Tee Joint with Varied Material Anisotropy and Fiber Orientation Angle Sunil Nimje, S.K. PANIGRAHI (Deemed U., Pune, India) Stacking Optimization for CLD Laminate Plates with Distributed Loads G.M. LUO, T.Y. Hsieh (Nat. Kaohsiung Marine U., Kaohsiung) Behavior Of Fiber Composites At Low Strain Rates Dahsin LIU, Guojing Li (Michigan St.U.) Wed-Thurs A Hypergraph-Based Method For Hierarchical Modular Decomposition Yan-qiu Xiao, He ZHAO, Lei Wang (Zhengzhou U. Light Ind., China) Numerical Modal Analysis Of An Embedded Carbon Nanotube In A Polymer Matrix Roham RAFIEE (U. Tehran, Iran), Reza Maleki (Semnan U., Iran) Impact of CNT and CNT Network Morphological Parameters On The Effective Mechanical Properties Of CNT-Reinforced Composites Willy LeCLERC, Philippe Karamian, Alexandre Vivet, Alain Campbell (U. Caen Basse-Normandie, France) Geometrically Nonlinear Free Vibration of Functionally Graded Plates Satyajit PANDA (Indian Inst.Tech., Guwahti) Optimal Design of Composite Panels in Three Types of Reinforcement Against Buckling Huahua PANG (First Aircraft Inst, Xi’an, China), Shijun Guo, Qiang Fu (Cranfield U., UK) Parametric Study Of Soil Water Characteristic Curve Model Sheng-Huoo NI, Yu-Zhang Yang, Men-Ying Wang (Nat. Cheng Kung U., Tainan) Bending Strength Study For The Sandwich Beams With Glass/ Polypropylene Faces And Aluminum Foam Core Yi-Ming JEN, Zih-He Tang (Nat. Taiwan Ocean U., Keelung) Blast Load Response Of Ship Hull Laminated Plates With Imperfections Ionel CHIRICA, Elena-Felicia Beznea (U. Dunarea Galati, Romania) Shear And Axial Buckling Behaviour Of The Delaminated Ship Deck Plates Elena-Felicia BEZNEA, Ionel Chirica (U. Dunarea Galati, Romania) Numerical Analysis Of The Mechanical Properties Of Circular Cell Honeycombs Ting-Chun Lin, Jong-Shin HUANG (Nat. Cheng Kung U., Tainan) Nonlinear Cascade In Aliasing-Free Space Compression Revisited Sunil R. DAS (Troy U., Montgomery, AL), Satyendra N. Biswas (Dhaka, Bangladesh),

Voicu Groza (U. Ottawa, Canada), Mansour H. Assaf (U. South Pacific, Fiji), Irem Ozkarahan , Scott Morton (Troy U.) Tues-Wed Vibration Response Of Soft Core Sandwich Beams J. Suleman (Jet Aviation, Switzerland), S. Monzon (Lockheed Martin, USA), Q. Liu (Henry Jackson Foundation, USA), Yi ZHAO, M. Mirmirani (Embry-Riddle Aero U., Dayton Beach, FL) Study On Stress Singularity Of Multi-Material Mode Iii Cracks Using The Symplectic Dual Approach Weian YAO, Xiaofei Hu, Qiang Gao (Dalian U.T., China) Transverse Crack In Asphalt Composites Of Road Structure Sadjad PIRMOHAMMAD, Majid Reza Ayatollahi, Karo Sedighiani (Iran U. Sci Tech, Tehran) Stress Analysis Of Penny-Shaped Crack Considering The Effects Of Surface Elasticity P. Intarit, T. SENJUNTICHAI, J. Rungamornrat (Chulalongkorn U., Bangkok), R.K.N.D. Rajapakse (Simon Fraser U., Burnaby, Canada) Material Characterization of Viscoelastic Core Materials in Sandwich Structures, C.M. MOTA SOARES, A.L. Araujo, C.A. Mota Soares (TU Lisbon, Portugal), J. Herskovits (Fed U. Rio de Janeiro, Brazil) Self-Healing Of Bond Characteristics At The Interface Between Fiber And Matrix Dong Joo KIM (Sejong U., Seoul, S. Korea), Tae-Ho Ahn (U. Tokyo, Japan), Seok Hee Kang (Sejong U.) Elastoplastic Analysis of a Functionally Graded Beam Subjected to Pure Bending Huimin YIN, Guojun Nie (Tongji U., Shanghai, China) Effective Properties Of Composites With Imperfect Contact Guillermo MONSIVAIS (UNAM, Mexico), Jose A. Otero (ICIMAF, Habana, Cuba), Reinaldo Rodriguez-Ramos (U. Habana, Cuba) Nonlocal Refined Plate Theory For Buckling Of Nanoplates Huu-Tai THAI, Dong-Ho Choi, Sun-Gil Gwon (Hanyang U., Seoul, S. Korea) A Nonlocal Refined Plate Theory For Vibration Of Nanoplates Dong-Ho CHOI, Huu-Tai Thai, Ho-Sung Na, Jihoon Pyo (Hanyang U., Seoul, S. Korea) Improving The Strength Of Abs 400 Material Using Design Of Experiment Andrew Dominguez, Rafiq NOORANI (Loyola Marymount U., Los Angeles, Calif.) Tues-Wed Second-Order Two-Scale Simulation For Bending Behaviors Of Composite Plate With 3-D Small Periodic Configuration Ziqiang Wang , J.Z. CUI (CAS, Acad Math Sys.Sci., Beijing, China) Stress Analysis Of The Outwater-Murphy Fiber/Matrix Debond Specimen C.T. TSAI, M.U. Farooq, L.A. Carlsson (Florida Atlantic U., Boca Raton) Second-Order Two-Scale Analysis Method for the Conductive Transfer Problem with Radiation Boundary Condition in Periodically Porous Materials Qiang MA, Junzhi Cui (CAS, Acad Math Sys.Sci., Beijing, China) Coupled Flexural-Torsional Vibration of Delaminated Beams Subjected to Axial Loads and Static End Moments Yang LIU, Dongwei Shu (Nanyang T.U., Singapore) Progressive Failure and Post-buckling Response of Tapered Composite Plates Rajamohan GANESAN, Dai Ying Liu, Shaikh Akhlaque-E-Rasul (Concordia U., Montreal, Canada) Sub-harmonic and Super-harmonic Response Analysis of Fixed-Free Single Walled Carbon Nano Tube Anand Y JOSHI, Ankit Gupta, Satish C Sharma, S.P. Harsha (IIT Roorkee, India) Impact Energy of Aluminum Weldments Using Double Shoulder Friction Stir Welding M.A. Shahenda, Ebtisam F. Abdel-GWAD, Soher Samy (Port-Said U., Egypt) Investigating The Behaviour Of A Magneto-Electro-Elastic Sandwich Construction K.M. GUPTA, Mahesh C. Kaushal (MNNIT, Allahabad, India) Uncertainty Analysis Of Fiber-Reinforced Laminated Composite Beams Using Fuzzy

Finite Element Approach Singiresu S. RAO (U. Miami, Coral Gables, FL) A State Space Differential Reproducing Kernel Method For Functionally Graded Material Sandwich Cylinders Chih-Ping WU, Ruei-Yong Jiang (Nat. Cheng Kung U., Tainan) Study Of The Variation Of Empirical Parameters Of Creep Of A Composite Material With Temperature Ahmed KOUADRI-Boudjelthia, A. Bouabdallah, Abbes M. Tahar Modeling Of Creep Behaviour Of A Composite Material Ahmed KOUADRI-Boudjelthia, A. Bouabdallah, M. Tahar Abbes (USTHB, Algeria) Free Vibration Analysis Of Two Dimensional Functionally Graded Plates Based On Three Dimensional Theory Of Elasticity And Graded Finite Element Method Kamran Asemi, Manouchehr SALEHI, Mehdi Akhlaghi (Amirkabir U.T., Iran) The Effect Of Crack Nucleation And Growth On The Mechanical Properties In Nanoindentation Test Reza Pejman, S. Hassan Salehi, Manouchehr Salehi (Amirkabir U.T., Iran) Development Of Simplified Unit Cell Method For Micromechanical Analysis Of ViscoelasticViscoplastic Composite Materials Saeed Masoumi, Hassan Behzadpoor, Monouchehr SALEHI (Amirkabir U.T., Iran) Several Means of Thermal Conductivity Calculation for Carbon-Bonded Carbon Fiber Composites Huang HE, Changqing Hong, Shuai Yang (Harbin I.T., China) Vibrations Of Double-Walled Carbon Nanotubes Using The Finite Element Method Milad Hemmatnezhad, Reza ANSARI (Islamic Azad U., Iran) Tues-Thurs Prediction Of Vibrational Behavior Of Stiffened Cylindrical Shells Milad HEMMATNEZHAD, Hossein Rahimi (Tarbiat Modares U., Iran) Tues-Thurs

METALS or METALLURGY Effect Of Sliding Direction In W71/L35 Micro-Ellipse Type Surface Tuxturing For Reduction Friction W.S. CHOI, D.Y. Park, K.C. Suk, J.W. Son, J.M. Park, S.S. Kwon, S.W. Chung, Y.M. Lee (Pusan Nat. U., S. Korea) Surface Roughness Prediction And Characteristics Of Ti-5Al-2.5Sn In Electrical Discharge Machining Using Neural Network Md. Ashikur Rahman KHAN, M.M. Rahman, K. Kadirgama (U. Pahang Malaysia), D. Hui (U. New Orleans) Characteristics Of Surface Integrity When Machining Of Hastelloy C-2000 In End Mill Process M.M. Rahman, N.H. Razak, K. Kadirgama (U. Pahang Malaysia, D. Hui (U. New Orleans) Structure Stability Of Fe73.5Nb3Cu1Si 15.5B7 Amorphous Alloy At Laser Irradiation Yu S. Nykyruy, S.I. Mudry (Ivan Franko Lviv Nat. U., Ukraine) Structure And Properties Gas-Dynamic Coverings Of Metals Gennady MOSKVITIN, Vladimir Arhipov, Maxim Pugachev, Anatoly Londarsky (Inst. Mach.Sci. of Ras, Moscow, Russia) Microstructural Study Of Pulsed Electric Current Sintered High Carbon Fe–Cr–Al–C Alloy Juho LOTTA, Simo-Pekka Hannula (Aalto U., Finland) Isothermal Oxidation of TiCrN Coatings Deposited On A Steel Substrate By Ion Plating Sung-Bin WON, Seul-Ki Kim, Min-Jung Kim, Dong-Bok Lee (Sungkyunkwan U., Suwon, S. Korea) Wear Resistance Of Alumina Fiber- And Particle- Reinforced Metal Matrix Composite Tong WANG, Masahiro Shozaki, Masataka Yamamoto, Akio Kagawa

(Nagasaki U., Japan) Microstructure And High Temperature Anti-Oxidation Performance Of Amorphous AlPO4 Coating Formed On TA15 Alloy Hong TIAN, Yaming Wang, Zixuan Zhu, Jiahu Ouyang, Dechang Jia, Yu Zhou, Lixin Guo (Harbin I.T., China) Ablation of Hybrid Metal Matrix Composites D. Weiss (Eck Insdustries, Manitowoe, WI), B. Schultz, Pradeep K. ROHATGI (U. WisconsinMilwaukee) Mechanical Properites Of Spray-Formed Al-Si Alloys C.–H. Chiang, Chi Y.A. TSAO (Nat. Cheng Kung U., Tainan) Wed-Thurs Investigation on Performing Features of Triple-Cathode Plasma Surface Alloying System Xingfu RONG, Zhiyu Qin (Taiyuan U.T., China), Shuo Rong (Shanxi U., Taiyuan, China) Prediction Of Grinding Machinability When Grind P20 Tool Steel Using Engineered Nano Fluid Coolant K. KADIRGAMA, M.M. Rahman, W. Azmi. K.V. Sharma (U. Malaysia Pahang) Mathematical Modeling Of Material Removal Rate On Ti-5Al-2.5Sn With Positive CopperTungsten Electrode Through Edm Mustafizur M. RAHMAN, Md. Ashikur Rahman Khan, K. Kadirgama (U. Malaysia Pahang) Mechanical Responses Of High Phosphorous Electroless Ni-P Coatings Deposited on Al 7075-T6 Mohamed A. RAHMAT (Monash U., Australia), R.H. Oskouei (Flinders U., Bedford Park, Australia), R.N. Ibrahim (Monash U.) Structure Of Magnetic Fluids On The Base Of Ga-In(Sn) Eutectic Melts. I. Shtablavyi, Stepan MUDRY, O. Kovalskyi (Nat U. Lviv, Ukraine) Metal-Metal Bonding Process Using Silver/Copper Nanoparticles Yoshio KOBAYASHI, Tsukasa Shirochi (Ibaraki U., Japan), Yusuke Yasuda, Toshiaki Morita (Hitachi Ltd., Ibaraki, Japan) Mon-Tues Mechanical and Tribological Evaluation Of Different PVD Coatings Deposited On Structural Steel 16MnCr5 Attila VANYA, Miroslav Bosansky, Maria Hudakova, Ľubomir Caplovic (Slovak U.T., Bratislava, Slovakia) Effect of Cooling Condition On Tensile Properties Of Aged Ti-7.5Mo Alloy Yen-Chun Chen, Chin-Chin CHUNG, Yuan-Sen Tsai, Chien-Ping Ju, Jiin-Huey Chern Lin Immersion-Induced Property Changes In A Calcium Sulfate Cement Wei-Luen CHEN, Jing-Wei Lee, Chien-Ping Ju, Jiin-Huey Chern Lin (Nat. Cheng Kung U., Tainan) Immersion-Induced Property Changes In A Calcium Phosphate-Calcium Sulfate Composite Cement Chang-Keng CHEN, Sen-Hsiang Hung, Chien-Ping Ju, Jiin-Huey Chern Lin (Nat. Cheng Kung U., Tainan) Effect Of Fe Doping On The Properties Of Sr2Co1-XFexMoo6 Double Perovskite As Cathode Materials For Oxygen Reduction In Alkaline Environment Kahoul ABDELKRIM, Cheriti Mabrouk (U. Abbas Setif, Algeria) Study On Wear-Resisting Of SiC Particles Reinforced Aluminum Matrix Composites By Ultrasonic Stirring Xiu-Hong WANG, Yu-hui Zhang, Hong-xia Gao (Zhengzhou U. Light Industry, China) Effect Of Aluminium Particles Added in Ap/HtPb Solid Propellant On The Radiative Heat Transfer – A Numerical Study Hui Ying WANG (U. Poitiers, France), Fabien Chassagne, Serge Bordachar (DGA, France), Pierre Joulain (U. Poitiers, France) Preparation Of Continuous Si3N4 Reinforced 2024 Aluminum Alloys Composites By Pressure Infiltration Method Qiang LIU, Feng Ye, Shichao Liu, Zhaoping Hou, Biao Zhang (Harbin I.T., China) The Effect Of Cobalt-Alloy Surface On The Formation Of Mineral Tissue Julio JUAREZ , M. Alvarez, O. Alvarez (UNAM, Mexico) Mon-Thurs

Wear Resistance of Alumina Fiber and Particle Reinforced Metal Matrix Comosites Tong Wang, M. Shozaki, M. Yamamoto, Akio KAGAWA (Nagasaki U., Japan) WC-W2C Composites Production By Eutectoid Decomposition Of Arc Plasma Melt-Cast Of Tungsten and Tungsten Carbide Mixture Bijan B. NAYAK, T. Dash, B.K. Mishra (CSIR, Bhubaneswar, India) Formation Of Ultrafine Eutectic In Hypereutectic Alloys Produced By Heat Treatment Of Nickel Coated Aluminium Substrate Ladislav CELKO, Lenka Klakurkova (TU Brno, Czech Rep.), Bedřich Smetana (TU Ostrava, Czech Rep.), Karel Slamecka (TU Brno), Monika Zaludova (TU Ostrava), Jiri Svejcar (TU Brno) Machinability Assessment Of Local Steel AISI 1035 In Turning Process Using Coated Carbide Tools J. El-Taybany (Port Said U., Egypt), Dr. M. Abdel Salam (Ain Shams U., Egypt), S.M.I. ABDOU, A.A. Al-Baghdady (Port Said U.) Estimation Of The Particle Aspect Ratio Effect On The Young´S Modulus For Al-Alloy/SiCp Composites Ismeli ALFONSO (U.Auto Carmen, Campeche, Mexico), Ignacio A Figueroa (UNAM, Mexico), Juan Manuel Sierra, Mohamed Abatal (Campeche), Gonzalo Gonzalez (UNAM), Vladimir Rodriguez (Campeche), Ariosto Medina (UMSNH, Mexico), Jose Flores (U.A. Carmen) Cutting Performance And Wear Characteristics Of TiCN-Coated Insert In Turning Of Hardneded Steel R.J. TALIB, A.M. Zaharah, M.A. Selamat, A. A. Mahaidin, M.F. Fazira (AMREC, Kulim, Malaysia) Metal Matrix Syntactic Foams: A Demonstration Of Manufacturability And Economic Viability Of Lightweight Automotive Components Pradeep K. ROHATGI, Benjamin F. Schultz (U. Wisconsin-Milwaukee), Dung D. Luong, Dinesh Pinisetty, Nikhil Gupta (New York Polytechnic, Brooklyn, NY) Research On The Influence Of Sintering Temperature To The Microstructure And properties of AZ91 Magnesium Alloy By Powder Metallurgy Jianxiu Liu (Zhenzhou U. Light Ind., China), Yajun ZHOU (Huanghe Sci Tech.Coll., Zhenzhou, China)

NANO COMPOSITES and PROCESSING of Nanomaterials Mechanical Properties And Thermal Conductivity On Polyimide/Layered Clay Nanocomposite Foams Si Yeol YANG, Cha eun Lee, Seung yong Jeong , Sangkug Lee, Gyo jic Shin, Kyung Ho Choi (Korea Inst.Ind.Tech., Chungnam, S. Korea) Influence Of Nanotube Organisation On The Properties of CNTs-Al2O3 Hybrid Reinforced Polymer Composites Delong HE, Weikang Li and Jinbo Bai (Ecole Cen.Paris, France) Nanoscience In Geotechnical Engineering: Stabilization Of Silt By Nano-Clay Mohammad NIKOOKAR, Meisam Bahari, Mohsen Karami, Mahyar Arabani, Akbar Khodaparast Haghi (U. Guilan, Iran) Influence Of Vanadium Dopant On Structure And Mechanical Properties Of BaBi2Nb2O9 Ceramics M. ADAMCZYK, A. Lisińska-Czekaj, L. Kozielski, D. Czekaj (U. Silesia, Poland) Heat-Drawing Of Twistless Nanofiber Bundle Tumen U. GANBAT, Young B. Choi, You Huh (Kyung Hee U., Yongin, S. Korea) Evaluation Of High Temperature Performance Of Nano Hollow Sphere Modified Binder

Yunpeng Wu, He Wang (Harbin I.T., China), Geng Xu (Jilin, China), Decheng Feng, Ning XIE (Harbin I.T., China) Characterization of Mechanical Properties : Low Density Polyethylene Nanocomposite Using Nano Alumina Particle As Filler Ching Yern CHEE (U. Malaya), N.L. Song, Luqman Chuah Abdullah, S.Y. Choong, Azowa Ibrahim (U. Putra Malaysia), T.R. Chantara (Kajang, Malaysia) Mechanical Behavior of Nano-Arrays with Surface Effects and Casimir Fan YANG, Gang-Feng Wang (Xi an Jiaotong U., China) Thermal And Morphological Analysis Of Inorganic Silica Nanoparticle Doped Graphene Oxide/Epoxy Nanocomposites Tongwu JIANG,Tapas Kuila, Zhang Hang, Nam Hoon Kim, Joong Hee Lee (Chonbuk Nat. U., Jeonbuk, S. Korea) Mechanical Behavior Of Graphene/Polyethersulfone Nanocomposites T. FORATI (Isalamic Azad U.,Tehran, Iran), M. Atai, M. Omidi, A.M. Rashidi, M.Imani, A. Behnamghader (Tehran, Iran) Kinetics of Propylene Aromatization on Pt-Cu /β-Al2O3 Nano Catalyst J Soji ADEYINKA, I.J. Otaraku (U. Abuja, Nigeria) Effect Of Intercalation With Clay Nanocomposite On The Surface Properties Of PVC Batbaatar Tsegmid (Mongolian U.Sci.Tech., Darkhan), Musa Sowe (U. Gambia, Kanifing), Dashdondog OYUNBILEG (Mongolian U.Sci.Tech.) Nanoindentation Characterization Of A Hybrid Nano Geomaterial Rohit Pant (Louisiana St.U.), Jialai Wang (U. Alabama, Tuscaloosa), Liming Hu (Tsinghua U., Beijing, China), Guoping ZHANG (Louisiana St.U.) Application Of Carbon Fiber–Nanotube Hybrid In Polymer Composites Mukul KUMAR (Meijo U., Nagoya, Japan), Takeshi Hasimoto (Meigo Nano Carbon Co.), Tomohiro Yamaguchi, Yoshinori Ando (Meijo U.) Tuesday Eological Properties Of SS316L-Hydroxyapatite Composite For Powder Injection Molding Mohd Ikram RAMLI, Abu Bakar Sulong (UKM, Malaysia) Carbon Nanotubes/Graphite/SS316 Powder/Polypropylene Nanocomposite: Rheology And Mechanical Properties Abu Bakar SULONG, Mohd Ikram Ramli, Seow Liang Hau, Norhamidi Muhamad (UKM, Kuala Lumpur, Malaysia) Microstructure, Vertical Strain Control and Tunable Functionalities in Self-Assembled Vertically Aligned Nanocomposite Thin Films Aiping Chen, Wenrui Zhang, Zhenxing Bi, H. WANG (Texas A&M U., Coll.Stn.) A Study Of Wetting Characteristics Of Carbon Nanotubes/Epoxy On Carbon Fiber Surface F. Oroojalian, Meisam OMIDI (U. Tehran, Iran), M. Ranjbartaznji , M. Alagheband (Iran) Thermogravimetric Analysis Of Polystyrene –VGCNF Nanocomposites Yun Zhai, David Hui (U. New Orleans), Magdalena Dorina Chipara, Karen Lozano, Mircea CHIPARA (U.Texas Pan Am, Edinburg) The Uniform Mono-Dispersed 10 nm ITO Nanoparticle Form Process Research: From Nanometer Flower To Nanometer Particle Lanlan. Yu (Northeast Petroleum U., Daqing, China), Lihong.SU (Northwestern Poly U., Xi an, China), Yanling Ai, Yiguang Wang, Jiaoqiang Wang, Baohui Wang, Xu Zhao (Northeast Pet U.) Synthesis And Spectroscopic Characterization Of Copper Doped Nano Apatite S. Lakshmi REDDY, G. Udayabashakar Reddy (Kadapa, India), Tamio Endo (Mie U., Japan) Growth of Diamond-Like Carbon Films on Silicaon Substrate by Various Carbon Clkuster Assemblies Tei-Chen CHEN, Ming-Chiao Liu (Nat. Cheng Kung U., Tainan), I-Chieh Chen (Nat. Cheng Kung U. Hospital) Mechanical and Thermal Properties of Mica/Polypropylene Nanocomposites by Melt Intercalation Method Yun-Yun Sun (Tung Fang Design U.,Kaohsiung), Chin-Hsing CHEN (Chinese Culture U., Taipei) Mon-Wed

Nanoscale Processes Simulated by Transforms and Image Processing Methods Nina Mirchin, Aaron Peled (Holon Inst Tech., Israel), Jacob AZOULAY (Hadassah Acad, Israel) Synthesis And Characterization Of Nano-TiO2 Particles From Low-Grade Mineral Precursors Mahdi E. MAHMOUD, M. Hamdi A. Shukor, M.Y.M. Sulaiman (U. Malaya, Kuala Lumpur, Malaysia) Microfluidics and MicroGISAXS – In Situ Characterization Of Nanostructures At The Solid-Liquid Interface Volker Koerstgens, Kuhu Sarkar (TU Muenchen, Germany), Adeline Buffet, Matthias Schwartzkopf, Stephan V. Roth (Hamburg, Germany), Peter Müller-Buschbaum (TU Muenchen) Atomic Force Acoustic Microscopy Nanomechanical Characterization Of Glass Fiber Reinforced Composites Xilong ZHOU, Faxin Li (Peking U., Beijing, China) Compatibility Investigations of Pure and nano-filled Acrylonitrile Butadiene Rubber/ Styrene Butadiene Rubber Blends Ebtesam ATEIA, H. H. Hassan, D.E. El-Nashar, N.A. Darwish, A.K. Abd El-Aziz (Cairo U., Egypt) On Characterization Of Nanocomposite Coatings By Indentation Technique Roberto CONTRO, P. Vena, D. Gastaldi, E. Bertarelli, D. Carnelli, M. Beghi, F. di Fonzo (Polytec. Milano, Italy) The Preparation Of Nanocellulose By Acid Hydrolysis Wei WEI (Southwest Jiaotong U., Chengdu,China) Lignin Degradation in Sub-critical Water Mengmeng ZHAO (Southwest Jiaotong U., Chengdu,China) Preparation And Characterization Of Helical Carbon Fiber By Heat Treatment Of Organic Helical Fibers Dingchuan WANG (Southwest Jiaotong U., Chengdu,China) The Research On Methods Of Dissolving Cellulose Shimeng LIU (Southwest Jiaotong U., Chengdu,China) Influence Induced By N-Doping On The Electronic Properties Of Graphyne Fanchen MENG (Southwest Jiaotong U., Chengdu,China) Failure Behavior Of MWCNT Reinforced Amorphous Polyimide Composites Baode ZHANG (Harbin I.T.), Wanchen Zang (Jilin U., China), I.V. Gofman (St. Petersburg, Russia), Yao Li (Harbin I.T.) The Effect Of MWCNT Introduction On The Mechanics Of Semi-Crystalline Polyimide/MWCNT Nanocomposites Baode ZHANG (Harbin Inst.Tech., China), Wanchen Zang (Jilin U., Alan G. MacDiarmid Inst., China), I.V. Gofman, Tatiana Sukhanova (St. Petersburg, Russia), Yao Li (Harbin I.T.) Aqueous Gelcasting of ZrB2-SiC Ultra High Temperature Ceramic Composites Based On The Gelation Of Sodium Alginate Xinghong Zhang, Rujie He, Ping Hu, Changqing Hong, Chen Liu (Harbin I.T., China) Low Temprature Sintering Of Nano ZrB2 By Mult-Step Sintering Without Additive Yang Hou, Xinghong Zhang, Ping Hu (Harbin I.T., China) Thermal Shock Resistance Of Porous ZrB2-SiC Ceramics Xinxin Jin, Xinghong Zhang, Rujie He, Ping Hu, Wenbo Han, Changqing Hong (Harbin I.T., China) Stucture And Property Of ZrB2/(Cu, Ni) Interpenetrating Phase Composites Jiancong Du, Xinghong Zhang, Changqing Hong, Ping Hu, Wenbo Han (Harbin I.T., China) Investigation On The Mechanical Properties Of Clay/Epoxy Nanocomposite Using Nanoindentation Sungrok HA, KyongYop Rhee (Kyung Hee U., Yongin, S. Korea)

Enhanced Thermal Stability of Nanocomposite Fe3O4/MWNT/Chitosan Films via Synergistic Effect Jason B. MARROQUIN, Kyong Yop Rhee (Kyung Hee U., Yongin, S. Korea) A Study On Electrical Properties in Chitosan/MWCNT Nanocomposites Dae Sung KIM, Kyong Yop Rhee (Kyung Hee U., Yongin, S. Korea), David Hui (U. New Orleans) Flexural Properties Of Moisture-Absorbed Basalt/CNT/Epoxy Composites Man Tae KIM (Gumi Elect. Inform.Tech. R.I., Gumi, S.Koreaq), Kyong Yop Rhee (Kyung Hee U., Yongin, S. Korea), Surface Treatment Of Basalt Fibers To Improve Tensile Properties Of Basalt/Epoxy Composites Tae Kyung KIM, KyongYop Rhee (Kyung Hee U., Yongin, S. Korea), Young Chan Jung (U. Pennsylvania) Plasma Treatment of PP to Improve The Bonding Strength of PP/Aluminum Composites Ja Ho KU, Kyong Yop Rhee (Kyung Hee U., Yongin, S. Korea) Experiment Study On The Tensile Properties Of Graphene/Chitosan Nanocomposites Jae Ha LEE, Kyong Yop Rhee (Kyung Hee U., Yongin, S. Korea), David Hui (U. New Orleans) Cellular Response Of Gelatin Nanofibers Containing Silver Nanoparticles For Wound Dressings Lim JEONG, Ko Eun Park, Yun Ok Kang, Ja young Cheon (Chungnam Nat. U., S.Korea), Byung-Moo Min (Seoul Nat.U.), Won Ho Park (Chungnam N.U.) pos Bone Regeneration Ability Of SF/PCL Nano/Microfibrous Composite Scaffolds Ko Eun PARK, Lim Jeong, Ja Young Cheon, Yun Ok Kang (Chungnam Nat.U., S. Korea), Young Sik Nam (Daejeon), Beom-Su Kim, HyungKeunYou, Jun Lee (Wonkwang U.), Won Ho Park (Chungnam N.U.) pos Fabrication And Characterization Of Poly(Vinyl Alcohol) Contaning Silver Nanoparticles Using Green Chemistry Ja Young CHEON, Lim Jeong, Yun Ok Kang, Ko Eun Park, Jong Hwa Lee, Min Hee Kim (Chungnam N.U., S. Korea), Young Sik Nam (Daejeon), Won Ho Park (Chungnam N.U.) pos Fabrication And Characterization Of Chitosan Oligomer Stabilized Silver Nanoparticles Using Green Chemistry Yun Ok KANG (Chungnam Nat.U., Daejeon, S. Korea), Young Sik Nam (Daejeon), Won Ho Park (Chungnam Nat.U.) pos Comparison Of Magnetic And Microwave Absorbing Propertis Between Multiwalled Carbon Nanotubes Nanocomposite, Nickel Zinc Ferrites Nanocomposite, And Hybrid Nanocomposite Lih Jiun Yu, Sahrim Hj. Ahmad (UKM, Selangor, Malaysia), Ing KONG (RMIT, Australia), Sivanesan APPADU (UKM, Malaysia) Halloysite Nanotubes (HNTs) Reinforced with Aluminium powder/ Epoxy Composites for Rapid Tooling Application–A Review Pang Jing Shen, M.N.M.Ansari, Omar S.Zaroog (u. Tenaga Nas., Selangor, Malaysia), S.M. Sapuan (U. Putra Malaysia, Selangor), Robert A. Shanks, Ing KONG (RMIT, Melbourne, Australia) Production and Characterization of Cu Coated CNTs Reinforced Aluminum Matrix Composites Adnan Maqbool, M. Asif Hussain, Nabi Bakhsh, F. Ahmad Khalid (GIK Inst., Topi, Pakistan) Carbon Nanotube Reinforced Aluminium Matrix Nano-Composites: A Critical Review Umma ABDULLAHI, Md Abdul Maleque, Iskandar Idris Yaacob(IIUM, Kuala Lumpur, Malaysia), M.M. Rahman (U. Malaysia Pahang) poster

OXIDE COMPOSITES Thickness Effects on the Structural And Optical Properties of ZnO Films Prepared by Radio Frequency Magnetron Sputtering Dapeng Wang, Toshiyuki Lawaharamura, Mamoru Furuta, Akimitsu Hatta, Chaoyang LI (Kochi U.T., Japan) invited 23 min Low Temperature Fabrication And Study Of Bismuth-Based Microwave Ceramics Of ABO4– Type Structure Dionizy CZEKAJ, A. Lisińska-Czekaj, M. Adamczyk, L. Kozielski (U. Sliesia, Poland) Characterization Of Oxide Scales Fored On HVOF-Sprayed Nicocralyreta Coatings Min Jung KIM, Sung Bin Won, Yeon Sang Hwang, Dong Bok Lee (Sunkyunkwan U., S.Korea) Evaluation Of Antibacterial Property Induced By TiO2/ZnO Heterojunction Films Ze CHEN, Daian Wei, Guomin Wang, Shanlei Shang, Huijun Zhang (Heilongjiang U. Harbin, China) Extraction Of Trap Density On Oxide Thin-Film Transistors With Various Channel Thickness Jingxin JIANG, DapengWang, Chaoyang Li, Mamoru Furuta (Koichi U.T., Japan) Oxidation of TiBCN Films Deposited on Steel Sung-June BONG, Seul-Ki Kim, Min-Jung Kim, Dong-Bok Lee (Sungkyunkwan U., S. Korea) Spectroscopic Characterization Of Copper Doped Nano Apatite Synthesized By Thermal Decomposition Method S. Lakshmi REDDY, G. Udayabashakar Reddy (Kadapa, India), Akira Okada, Tamio Endo (Mie U., Japan) Effect of MgO Characteristics On Synthesis Of Layered Magnesium Silicates Fei JIN, Abir Al-Tabbaa (Cambridge U., UK) Influence of Substrate on Zinc Oxide Nanostructures Grown by Thermal Annealing Xin LI, Chaoyang Li, T. Kawaharamura, D. Wang, M. Furuta, A. Hatta (Kochi U.T., Japan) Thermal And Voltage Instabilities Of Hafnium Oxide Films Prepared By Sputtering Technique H. WONG, B.L. Yang (City U., Hong Kong, SAR), Chengpeng Li, Chunfang FENG, Yongyue Luo, Zheng Peng, L.X. Kong (Deakin U., Geelong, Australia) Study On Nanoscale Structure Of Thin Oxide Thin Films M. Maleki, S.M. ROZATI (U. Guilan, Iran) The Effect Of Graphene Oxide On The Thermal And Mechanical Properties Of The Liquid Epoxidized Natural Rubber Toughened Epoxy Composite Chin Hua CHIA, Noorhafanita Norhakim, Sahrim Hj Ahmad (UKM, Kuala Lumpur, Malaysia), Nay Ming Huang (U. Malaya), Hong Ngee Lim (U. Putra Malaysia, Selangor) Effect Of Active Layer Thickness On Drain Current Stress Instability In InSnZnO Thin-Film Transistors Dapeng WANG, Jingxin Jiang, Toshiyuki Kawaharamura, Chaoyang Li, Mamoru Furuta (Koichi U.T., Japan), Shigekazu Tomai, Misa Sunagawa, Emi Kawashima, Mami Nishimura, Masashi Kasami, Koki Yano (Kdemitsu Kosan Co., Chiba, Japan) Design And Fabrication Of Battery-Free Wireless Gas Sensor Arrays Based On 3D Composite Oxide Semiconductor Nanowire Materials Chu JIN, Xaioyan Peng, David. Wang, Peter X. Feng (U. Puerto Rico, PR) 2+ The Crystallization And Luminescence Of Sm -Doped SrO-Bi2O3–K2O–B2O3 Glass Ceramics Taiju TSUBOI (Kyoto Sangyo U., Japan), Zhihao Wei, Xigang Wang, Yanlin Huang (Soochow U., Suzhou, China) Influence Of Both Cooling Rate And TeO2 Addition On The Properties Of YBCO Superconductor Y.M.Z. AHMED, M.S. Hassan (CMRDI, Cairo, Egypt),

H. Abd-Elatif (Cairo, Egypt) Effect of Oxygen Vacancies On Photoresponse Time Of Optoelectronic Devices Based on β-Ga2O3 Hetroepitaxials R.H. HORNG, P. Ravadgar (Nat. Chung Hsing U., Taichung), L.W. Tu (Nat. Sun Yat-Sen U., Kaohsiung) W-Doped TiO2 Thin Film Based On Heterojunction Substrate for O2 Sensor Applications Huijun ZHANG, Tingyu Han, Xiaolei Sun, Wen Zeng, Zhiyuan Dong, Dianzhong Wen (Heilongjiang U., Harbin, China)

TEXTILE COMPOSITES or NATURAL or NANO FIBERS Plasticized Cellulose Acetate – Natural Fibre Composite Chaowei Pang, Robert A. Shanks, Kong Ing, Fugen Daver (RMIT, Melbourne, Australia) Antimicrobial Effectiveness Of Nano-Composite Thin Films Deposited on PLA Surfaces By Simultaneous Plasma Polymerization/Sputtering Technique Sandra BISCHOF, Marina Turalija (U. Zagreb, Croatia), Sabyasachi Gaan (EMPA, Gallen, Switzerland) Copper-Carbon Core-Shell Nanoparticles As A Potential Fungicide Against Blue-Stain Fungus,Ophiostoma Minus Yadong, QI, Michaela Danzy (Southern U. Baton Rouge, LA), Kun Lian, Qinglin Wu (Louisiana St.U.), Roger Menard (USDA Forest Serv., Pineville, LA), Daniel Collins (SUBR), Forrest Oliveria, Kier Klepzig (USDA) Friction Bundling of Nano-Fibrous Fleece Jung H. Lim, T.U. Ganbat, Young B. Choi, You HUH (Kyung Hee U., Yongin, S. Korea) The Modified Influence The Composite PBT Melt Blowing Nonwoven For The Leucocytes Filtration Da-Guang YU (Taoyuan Innov. Inst Tech, Taoyuan) Long-Term Performance Interpretation Of Geotextiles By Accelerated Experimental Data Under Environmental Condition Han-Yong JEON (Inha U., Incheon, S. Korea) Influence Of Alkali Treatment On Mechanical Properties Of Napier Grass Fiber Reinforced Epoxy Composites Kommula V. PARASURAM, K Obi Reddy, Mukul Shukla, Tshilidzi Marwala (U. Johannesburg, S. Africa) Tues-Wed Energy Absorption Mechanisms Of Natural Fibre Composites Paul Wambua (Moi U., Eldoret, Kenya), James Njuguna (Cranfield U., UK) Simulation Of Textile Composite Reinforcement Forming. Analysis Of Wrinkling Philippe BOISSE, Nahiene Hamila, Wang Peng (INSA Lyon, France) Flex Fatigue Of Polymeric Optical Fibers Jiri MILITKY, Dana Kremenakova (TU Liberec, Czech Rep.) Study on the Modification of Nylon 66 with Glass Fiber and MAH-g-SEBS Jianyun He, Pengcheng Xie, Zichen Xue (BUCT, Beijing, China), Chunyan Li, Yafei Lu (Key Lab Carbon Fiber Funct. Polymers, BUCT, China) Preparation of UV-curable Organic-Inorganic Hybrid Nanocomposites from GPTMS Siloxane Oligomer and SAP Jianyun HE, Yong Liu, Zicheng Xue (BUCT, Beijing, China), Yafei Lu (Key Lab Carbon Fiber Funct. Polymers, BUCT, China) Fabrication and EMI Shielding Efficiency Of Nano-Amorphous Composite Fibers J.F. Sun, Huan WANG (Harbin I.T., China), F.X. Qin (U. Bristol, UK), D.W. Xing (Harbin I.T.), H.X. Peng (U. Bristol)

Formation of Refractory Nanofibers by Heat-Treatment of Poly(vinyl alcohol)-Inorganic Hybrids Koji NAKANE, Nobuo Ogata (U. Fukui, Japan) Flame Retardant for Natural Fiber Composites Ahmed El-SABBAGH, L. Steuernagel, G. Ziegmann (TU Clausthal, Germany) Mon-Thurs Notes on Thermal Analysis and Blowholes in Natural Fibres Thermalplastic Composites Ahmed El-Sabbagh, A. RAMZY, L. Steuernagel, G. Ziegmann (TU Clausthal), V. Siozios, S. Passerini, M.Winters (W. Wilhelms U., Germany) Mon-Thurs Predictions And Measurements Of Natural Frequency Shifts In Delaminated Braided Textile Composite Beams Benjamin M. DAUDA, A.A. Kogo (Ahmadu Bello U., Zaria,Nigeria), S.O. Oyadiji, P. Potluri (U. Manchester, UK) Tensile And Dynamic Mechanical Properties Of Pulp Fiber-Reinforced Thermoset Polymer Composites Yicheng Du, Tongfei Wu, Ning Yan, Mark T. Kortschot, Ramin FARNOOD (U. Toronto, Canada) Impact Of Organo-Nanoclay Modification Of Biofibers On Mechanical Properties Of Biofiber Polymer Composites Jieming Chen, Ning YAN (U. Toronto, Canada) Optimum Manufacturing Conditions of Oxidized PAN-based Electrospun Non-Wovens Jhih-Wei WONG, Ching-Iuan Su, Chi-Wei Lin, Yen-Sheng Liu (Nat. Taiwan U Sci Tech., Taipei) Natural Fiber/Wood Plastic Blends Modified By Copper/Carbon Core Shell Nanoparticles (CCCSNS) Qinglin WU (Louisiana St.U.), Kun Lian, Yadong Qi (Southern U ., Baton Rouge) Compressive Residual Strength Properties Of An Impact Damaged 3d Woven Orthogonal Hybrid Composite Ansar MAHMOOD, Xinwei Wang, Chuwei Zhou (NUAA, Nanjing, China) Thermal And Morphological Properties Of Spartium Junceum Fiber-Reinforced Green Composites Zorana Kovacevic, Sandra Bischof (U. Zagreb, Croatia), Andrea Katovic (U. Calabria, Italy)