How to select the right heating devices for mounting of rolling bearings

1. According to the bearing weight

MAX:

10kg

20kg

35 kg

150kg

MAX:

300kg

600kg

1200 kg

3000kg

2. According to the dimensions of the bearing •

HEATER10

•

• •

The min bore diameter of work piece for standard heating ledge is 20mm (The min bore diameter of work piece for optional heating ledge is 10mm), The max outer diameter of the work piece is 210mm the standard heating ledge is 20／45／65mm the opitional heating ledge is 10／15mm

•

HEATER20

•

The min bore diameter of work piece for standard heating ledge is 20mm (the min bore diameter of work piece for optional heating ledge is 10mm), the max outer diameter of the work piece is 280mm the standard heating ledge is 20／35／60mm the optional heating ledge is 10／15mm

• •

•

HEATER35

•

• •

The min bore diameter of work piece for standard heating ledge is 70mm (The min bore diameter of work piece for optional heating ledge is 15mm), The max outer diameter of the work piece is 210mm the standard heating ledge is 70mm the optional heating ledge is 15／20／35／45／60mm

•

HEATER150

•

• •

The min bore diameter of work piece for standard heating ledge is 100mm (The min bore diameter of work piece for optional heating ledge is 20mm), The max outer diameter of the work piece is 515mm the standard heating ledge is 100mm the optional heating ledge is 20／30／45／60／70 ／85 mm

•

HEATER300

•

The min bore diameter of work piece for standard heating ledge is 115mm (The min bore diameter of work piece for optional heating ledge is 30mm), The max outer diameter of the work piece is 740mm the standard heating ledge is 100mm the optional heating ledge is 30／45／60／70 ／85 ／100 mm

• •

•

HEATER600

•

• •

The min bore diameter of work piece for standard heating ledge is 145mm (The min bore diameter of work piece for optional heating ledge is 45mm), The max outer diameter of the work piece is 900mm the standard heating ledge is 145mm the optional heating ledge is 45／60／70 ／85 ／100 ／115 ／130 mm

•

HEATER1200

•

• •

The min bore diameter of work piece for standard heating ledge is 215mm (The min bore diameter of work piece for optional heating ledge is 85mm), The max outer diameter of the work piece is 1500mm the standard heating ledge is 215mm the optional heating ledge is 85 ／115 ／145 mm

•

HEATER3000

•

The min bore diameter of work piece for standard heating ledge is 285mm (The min bore diameter of work piece for optional heating ledge is 145mm), The max outer diameter of the work piece is 2000mm the standard heating ledge is 285mm the optional heating ledge is 145 ／215 mm

• •

3. According to the voltage used by customer •

The index voltage of HEATER10~~HEATER35 is 220V. Customer also can select the HEATER with nonstandard voltage and frequence, the voltage scope is from 110V to 240V, the frequence can be 50HZ or 60HZ. For example: the customer require the Heater used under 115V／60HZ, we provide HEATER10-115V-60HZ。

•

The index voltage of HEATER150~~HEATER3000 is 380V. Customer also can select the HEATER with nonstandard voltage and frequence, the voltage scope is from 200V to 600V, the frequence can be 50HZ or 60HZ. For example: the customer require the Heater used under 460V／60HZ, we provide HEATER150-460V-60HZ

4. Others •

• •

•

•

If the customer needs HEATER for big parts, we can supply tailor-made one, the customer only needs to provide the dimension and the weight of the work piece. HEATER300 can be made in mobile style, its description is: HEATER300.TROLLEY , its image as the photo shown The accessory of the sensor, its SAP.Mat.no 60671196

The heating up temperature of HEATER10 and HEATER20 is from ＋50℃ to＋240℃, The heating up temperature of HEATER35~~HEATER3000 is from ＋50℃ to＋400℃,(the highest heating temperature for bearing should be not more than ＋120℃) The dimension of the selected heating ledge should be close to the bore diameter of the work piece, so the efficiency can be guaranteed.

Advantage of FAG Heater •

Compared with our famous competitor: the heating place of work piece is far away from heater's control panel, so during the heating process, the oil dropping from the work piece will not damage the control panel, which will reduce the accident rate. Our competitor has an universal heater, and it will take a long time to heat the big work piece for its heating ledge is too slim, so the working efficiency is low.

•

Compared with another famous competitor: the customer can select, mount and dismount the heating ledge, while our competitor can not. It means our Heater have better cost efficiency and it is convenient for customer usage.

Appendix:

Checklist Concact Person

Customer Name

Tel Contact Person in Schaeffler

Tel

Selection Started

Y

M

D

Selection Finished

Y

M

D

The Selected Type Customer Service Tel Remark

Anything unclear contact us by: [email protected]