THREADING | 390

HOW TO INSTALL RECOIL® INSERTS

DRILL

STRIPPED

TAP

INSTALL

FIXED

Instructions 1. DRILL: Drill to clear out the damaged thread with drill size as specified on kit (if necessary). Standard Drill

2. CHECK: Ensure tap thread matches bolt. Recoil® STI Tap

3. TAP HOLE: Place tap into tap wrench or use the square drive in the installation tool provided*. Tap hole to the required depth using correct procedures (if unsure contact your dealer).

Recoil® STI Tap * Square drive tool only suitable for tapping non-ferrous alloys.

4. SET TOOL: Place insert on installation tool, positioning the adjustable top so that the insert tang is centred in the tang slot. Recoil® Installation Tool

5. INSTALL: Wind insert in with light downward pressure until 1/4 to 1/2 turn below the surface. Recoil® Wire Thread Inserts

6. TANG REMOVAL: Do not attempt to twist tang off with tool. Lift tool from tang, turn tool 90° and tap down sharply. Use tang break-off tool where supplied. For spark plug and large fine thread inserts, use long nose pliers to pull tang out.

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL [email protected] | website pandn.co.nz

Recoil® Tang Break Tool

Thread Repair Kits Everything you need for complete thread repair in one handy case. Trade Series kits include only the best quality HSS taps which make them suitable for aluminium, magnesium, cast iron and most machinable steels. Contents: • HSS Drill Bit* • HSS Intermediate STI Tap • Thread Inserts • Installation Tool • Mangetic Tang Removal Tool* • Installation Instructions TRADE SERIES

* Included only on sizes M2 -M12 & #2-1/2”

ORIGINAL SERIES Supplied in metal tin

TRADE SERIES KITS thread repair kits Size

Pitch

Inserts per Kit

M2 M2.2 M2.5 M3 M4 M5 M6 M7 M8 M8 M9 M9 M10 M10 M10 M11 M11 M12 M12 M12 M14 M14 M14 M16 M16 M18 M18 M20 M20

0.4 0.45 0.45 0.5 0.7 0.8 1 1 1 1.25 1 1.25 1 1.25 1.5 1 1.5 1.25 1.5 1.75 1.25 1.5 2 1.5 2 1.5 2.5 1.5 2

15 15 15 15 15 15 15 15 15 15 10 15 15 10 10 10 10 10 10 10 6 6 6 6 6 6 6 5 6

*

Kit Type

Item No.

* * * * * * * * * * * * * * * * * * * *

Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series Trade Series

RE35028 RE35018 RE35258 RE35038 RE35048 RE35058 RE35068 RE35078 RE37088 RE35088 RE37098 RE35098 RE38108 RE37108 RE35108 RE38118 RE35118 RE38128 RE37128 RE35128 RE38148-1 RE37148 RE35148 RE37168 RE35168 RE38188-1 RE35188 RE38208 RE37208

List Price

Size

Pitch

Inserts per Kit

M20 M22 M22 M22 M24 M24 M24 M27 M30 M30 M30 M33 M36 M39 M42 M42 UNC #2 UNC #4 UNC #5 UNC #6 UNC #8 UNC #10 UNC #12 UNC 1/4 UNC 5/16 UNC 3/8 UNC 7/16 UNC 1/2 UNC 9/16

2.5 1.5 2 2.5 1.5 2 3 3 2 3 3.5 3.5 4 4 4 4.5 56 40 40 32 32 24 24 20 18 16 14 13 12

6 5 5 5 5 5 5 5 5 5 5 5 4 4 4 4 15 15 15 15 15 15 15 15 15 15 10 10 6

*

* * * * * * * * * * * *

Kit Type

Item No.

Trade Series RE35208 Original Series RE38220 Original Series RE37220 Original Series RE35220 Original Series RE38240 Original Series RE37240 Original Series RE35240 Original Series RE35270 Original Series RE37300 Original Series RE35300-3 Original Series RE35300 Original Series RE35330 Original Series RE35360 Original Series RE35390 Original Series RE35420-4 Original Series RE35420 Trade Series RE33528 Trade Series RE33548 Trade Series RE33558 Trade Series RE33568 Trade Series RE33588 Trade Series RE33608 Trade Series RE33628 Trade Series RE33048 Trade Series RE33058 Trade Series RE33068 Trade Series RE33078 Trade Series RE33088 Trade Series RE33098

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL [email protected] | website pandn.co.nz

List Price

391 | THREADING

TRADE SERIES KITS

THREADING | 392

THREADING TRADE SERIES KITS CONTINUED thread repair kits Size

Pitch

Inserts per Kit

UNC 5/8 UNC 11/16 UNC 3/4 UNC 7/8 UNC 1" UNC 1-1/4 UNC 1-3/8 UNC 1-1/2 UNF #4 UNF #8 UNF #10 UNF 1/4 UNF 5/16 UNF 3/8 UNF 7/16 UNF 1/2 UNF 9/16 UNF 5/8 UNF 3/4 UNF 7/8 UNF 1" UNF 1" UNF 1-1/8 UNF 1-1/4 UNF 1-3/8 BSW 1/8 BSW 3/16 BSW 1/4 BSW 5/16

11 11 10 9 8 7 6 6 48 36 32 28 24 24 20 20 18 18 16 14 12 14 12 12 12 40 24 20 18

6 5 6 5 5 5 5 4 15 15 15 15 15 15 10 10 6 6 6 5 5 5 5 5 3 15 15 15 15

*

* * * * * * * *

* * * *

Kit Type

Item No.

List Price

Trade Series RE33108 Original Series RE33110 Trade Series RE33128 Original Series RE33140 Original Series RE33160 Original Series RE33200 Original Series RE33220 Original Series RE33240 Trade Series RE34548 Trade Series RE34588 Trade Series RE34608 Trade Series RE34048 Trade Series RE34058 Trade Series RE34068 Trade Series RE34078 Trade Series RE34088 Trade Series RE34098 Trade Series RE34108 Trade Series RE34128 Original Series RE34140 Original Series RE34160 Original Series RE34160-14 Original Series RE34180 Original Series RE34200 Original Series RE34220 Trade Series RE32028 Trade Series RE32038 Trade Series RE32048 Trade Series RE32058

Size

Pitch

Inserts per Kit

BSW 3/8 BSW 7/16 BSW 1/2 BSW 5/8 BSW 7/8 BSW 1" BSW 1-1/4 BSF 3/16 BSF 1/4 BSF 5/16 BSF 3/8 BSF 1/2 BSF 7/8 BSC 5/16 BSC 3/8 BSP 1/8 BSP 1/4 BSP 3/8 BSP 1/2 BSP 5/8 BSP 3/4 BSP 1" NPT 1/8 NPT 1/4 NPT 3/8 NPT 1/2 UN 1-3/8 UN 1-3/4 UNEF 1/4

16 14 12 11 9 8 7 32 26 22 20 16 11 26 26 28 19 19 14 14 14 11 27 18 18 14 8 8 32

10 10 10 6 5 5 5 15 15 15 10 10 5 15 10 10 6 6 5 5 5 5 10 10 6 5 5 4 10

* * * *

* * * * * * * *

*

Kit Type

List Price

Item No.

Trade Series RE32068 Trade Series RE32078 Trade Series RE32088 Trade Series RE32108 Original Series RE32140 Original Series RE32160 Original Series RE32200 Trade Series RE30038 Trade Series RE30048 Trade Series RE30058 Trade Series RE30068 Trade Series RE30088 Original Series RE30140 Trade Series RE36508 Trade Series RE36608 Trade Series RE31028 Trade Series RE31048 Trade Series RE31068 Original Series RE31080 Original Series RE31100 Original Series RE31120 Original Series RE31160 Trade Series RE36028 Trade Series RE36048 Trade Series RE36068 Original Series RE36080 Original Series RE36220 Original Series RE36280 Original Series RE34040-32

* Drill & Magnetic Tangbreak Tool included

SPARK PLUG kits DESCRIPTION Contains 10 x M10-1 x 1.5D inserts & includes Hand Tool, Pilot Nose Tap and Magnetic Tangbreak Tool Contains 5 x M12-1.25 x 1D, and 1.5D inserts & includes Hand Tool, Pilot Nose Tap and Magnetic Tangbreak Tool Contains 5 x 3/4", and 3/8" Spark plug inserts, Installation Tool, Pilot Nose Tap and Extracting Tool Contains 5 x 3/4", and 3/8" Spark plug inserts Contains M18-1.5 x 1/2" long inserts, Installation Tool and Pilot Nose Tap Spark Plug Metric M14-1.25 3 x 8.4, 3 x 12.4 & 3 x 16.4mm inserts, Installation Tool and Pilot Nose Tap

Kit Type

Item No.

Trade Series Trade Series Original Series Trade Series Trade Series Trade Series

RE38108-2 RE38120-2 RE38140 RE38148-2 RE38188 RE38147

List Price

PLUG SAVER kit DESCRIPTION M14-1.25 SPK 2 x inserts of each length 1/2, 3/8 & 3/4, M14-1.25 Plug Saver Tap & Expander

Item No. RE38148

Additional Thread Repair Kit sizes are available - please enquire if your size IS not listed here.

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL [email protected] | website pandn.co.nz

List Price

Range Kits Recoil® Range Kits contain a seletion of Recoil’s® most popular sizes. It provides you with an all-in-one worskshop solution for multi-diameter thread repairs. It’s ideal for garages and other workshops where thread reapirs are often undertaken. Contents: • HSS Drill Bits • HSS Intermediate STI Taps • Thread Inserts • Installation Tool • Mangetic Tang Removal Tool • Installation Instructions

TRADE SERIES KITS CONTINUED RANGE KITS DESCRIPTION BSW 1/4, 5/16, 3/8, 7/16, 1/2 Metric M4, 5, 6, 8-1.25, 10-1.5 Metric M6, 8-1.25, 10-1.5, 12-1.75, 16-2 BSC/BRASS 1/4, 5/16, 3/8, 7/16, 1/2 UNC 1/4, 5/16, 3/8, 7/16, 1/2 UNF 1/4, 5/16, 3/8, 7/16, 1/2 Crank kit 1 each - left & right hand, 5 x 9/16-20x1/2" left hand inserts, 5 x 9/16-20x1/2" right hand inserts, installation tool

Item No. RE32004R RE35003R RE35005R RE36001R RE33004R RE34004R RE34096-20

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL [email protected] | website pandn.co.nz

List Price

393 | THREADING

THREADING

THREADING | 394

THREADING Wire Thread Inserts Recoil® helically wound wire thread inserts can be used to strengthen threads, giving applications a longer life. With a Recoil® insert installed, a more even distribution of load and stress can be achieved. Each insert sharing the load over the entire bolt and hole, improving holding or pull out resistance. Recoil® inserts are made of type 304 stainless steel wire rolled into a diamond shape cross-section.

THREAD INSERT PACKS METRIC METRIC COARSE THREAD INSERT PACKS DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert M2-0.4 x 1D Recoil Insert M2-0.4 x 1.5D Recoil Insert M2-0.4 x 2D Recoil Insert M2.2-.45 x 1.5D Recoil Insert M2.5-.45 x 1.5D Recoil Insert M3-0.5 x 1D Recoil Insert M3-0.5 x 1.5D Recoil Insert M3-0.5 x 2D Recoil Insert M3.5-0.6 x 1.5D Recoil Insert M4-0.7 x 1D Recoil Insert M4-0.7 x 1.5D Recoil Insert M4-0.7 x 2D Recoil Insert M5-0.8 x 1D Recoil Insert M5-0.8 x 1.5D Recoil Insert M5-0.8 x 2D Recoil Insert M6-1 x 1D Recoil Insert M6-1 x 1.5D Recoil Insert M6-1 x 2D Recoil Insert M6-1.0 x 2.5D Recoil Insert M7-1 x 1.5D Recoil Insert M8-1.25 x 1D Recoil Insert M8-1.25 x 1.5D Recoil Insert M8-1.25 x 2D Recoil Insert M8-1.25 x 2.5D Recoil Insert M9-1.25 x 1.5D

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

RE25022 RE25023 RE25024 RE25013 RE25253 RE25032 RE25033 RE25034 RE25353 RE25042 RE25043 RE25044 RE25052 RE25053 RE25054 RE25062 RE25063 RE25064 RE25065 RE25073 RE25082 RE25083 RE25084 RE25085 RE25093

List Price

DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert M10-1.5 x 1D Recoil Insert M10-1.5 x 1.5D Recoil Insert M10-1.5 x 2D Recoil Insert M10-1.5 x 2.5D Recoil Insert M11-1.5 x 1.5D Recoil Insert M12-1.75 x 1D Recoil Insert M12-1.75 x 1.5D Recoil Insert M12-1.75 x 2D Recoil Insert M13-1.75 x 1.5D Recoil Insert M14-2 x 1D Recoil Insert M14-2 x 1.5D Recoil Insert M14-2 x 2D Recoil Insert M15-2 x 1.5D Recoil Insert M16-2 x 1D Recoil Insert M16-2 x 1.5D Recoil Insert M16-2 x 2D Recoil Insert M16-2 x 2.5D Recoil Insert M18-2.5 x 1D Recoil Insert M18-2.5 x 1.5D Recoil Insert M20-2.5 x 1.5D Recoil Insert M22-2.5 x 1.5D Recoil Insert M24-3 x 1.5D Recoil Insert M30-3.5 x 1.5D

10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 3 3 1

RE25102 RE25103 RE25104 RE25105 RE25113 RE25122 RE25123 RE25124 RE25133 RE25142 RE25143 RE25144 RE25153 RE25162 RE25163 RE25164 RE25165 RE25182 RE25183 RE25203 RE25223 RE25243 RE25303

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL [email protected] | website pandn.co.nz

List Price

THREAD INSERT PACKS METRIC CONTINUED METRIC MEDIUM THREAD INSERT PACKS DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert M8-1 x 1D Recoil Insert M8-1 x 1.5D Recoil Insert M8-1 x 2D Recoil Insert M10-1.25 x 1D Recoil Insert M10-1.25 x 1.5D Recoil Insert M10-1.25 x 2D Recoil Insert M10-1.25 x 3D Recoil Insert M11-1.25 x 1.5D Recoil Insert M12-1.5 x 1D Recoil Insert M12-1.5 x 1.5D Recoil Insert M12-1.5 x 2D

10 10 10 10 10 10 10 10 10 10 10

RE27082 RE27083 RE27084 RE27102 RE27103 RE27104 RE27106 RE27113 RE27122 RE27123 RE27124

List Price

DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert M13-1.5 x 1.5D Recoil Insert M14-1.5 x 1.5D Recoil Insert M14-1.5 x 2D Recoil Insert M15-1.5 x 1.5D Recoil Insert M16-1.5 x 1D Recoil Insert M16-1.5 x 1.5D Recoil Insert M16-1.5 x 2.5D Recoil Insert M18-2 x 1.5D Recoil Insert M20-2 x 1.5D Recoil Insert M22-2 x 1.5D Recoil Insert M24-2 x 1.5D

5 5 5 5 5 5 5 5 5 3 3

RE27133 RE27143 RE27144 RE27153 RE27162 RE27163 RE27165 RE27183 RE27203 RE27223 RE27243

DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert M18-1.5 x 1.5D Recoil Insert M20-1.5 x 1.5D Recoil Insert M22-1.5 x 1.5D Recoil Insert M24-1.5 x 1.5D

5 5 3 3

RE28183 RE28203 RE28223 RE28243

DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert M14-1.25 x 3/8” Recoil Insert M14-1.25 x 1/2”

10 10

RE28148 RE28149

List Price

METRIC EXTRA FINE THREAD INSERT PACKS DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert M11-1 x 1.5D Recoil Insert M12-1.25 x 1/2 Recoil Insert M12-1.25 x 1.5D Recoil Insert M12-1.25 x 2D Recoil Insert M13-1.25 x 1.5D

10 10 10 10 5

RE28113 RE28122 RE28123 RE28124 RE28133

List Price

List Price

SPARK PLUG THREAD INSERT PACKS DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert M10-1 x 1.5D Recoil Insert M14-1.25 x 3/4”

10 10

RE28103 RE28140

List Price

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL [email protected] | website pandn.co.nz

List Price

395 | THREADING

THREADING

THREADING | 396

THREADING THREAD INSERT PACKS IMPERIAL UNC THREAD INSERT PACKS DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert UNC #2-56 x 1.5D Recoil Insert UNC #3-48 x 1.5D Recoil Insert UNC #4-40 x 1.5D Recoil Insert UNC #5-40 x 1.5D Recoil Insert UNC #6-32 x 1.5D Recoil Insert UNC #8-32 x 1.5D Recoil Insert UNC #10-24 x 1.5D Recoil Insert UNC #12-24 x 1.5D Recoil Insert UNC 1/4-20 x 1.5D Recoil Insert UNC 5/16-18 x 1.5D Recoil Insert UNC 3/8-16 x 1.5D Recoil Insert UNC 7/16-14 x 1.5D Recoil Insert UNC 7/16-14 x 2D

10 10 10 10 10 10 10 10 10 10 10 10 10

RE23523 RE23533 RE23543 RE23553 RE23563 RE23583 RE23603 RE23623 RE23043 RE23053 RE23063 RE23073 RE23074

List Price

DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert UNC 1/2-13 x 1.5D Recoil Insert UNC 1/2-13 x 2D Recoil Insert UNC 9/16-12 x 1.5D Recoil Insert UNC 5/8-11 x 1D Recoil Insert UNC 5/8-11 x 1.5D Recoil Insert UNC11/16-11 x 1.5D Recoil Insert UNC 3/4-10 x 1.5D Recoil Insert UNC 7/8-9 x 1.5D Recoil Insert UNC 1"-8 x 1.5D Recoil Insert UNC 1.1/8-7 x 1.5D Recoil Insert UNC 1.1/4-7 x 1.5D Recoil Insert UNC 1.3/8-6 x 1.5D Recoil Insert UNC 1.1/2-6 x 1.5D

10 10 5 5 5 5 5 3 3 1 1 1 1

RE23083 RE23084 RE23093 RE23102 RE23103 RE23113 RE23123 RE23143 RE23163 RE23183 RE23203 RE23223 RE23243

DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert UNF 1/2-20 x 1.5D Recoil Insert UNF 9/16-18 x 1.5D Recoil Insert UNF 5/8-18 x 1.5D Recoil Insert UNF 3/4-16 x 1.5D Recoil Insert UNF 7/8-14 x 1.5D Recoil Insert UNF 1-12 x 1.5D Recoil Insert UNF 1"-14 x 1.5D Recoil Insert UNF 1.1/8-12 x 1.5D Recoil Insert UNF 1.1/4-12 x 1.5D Recoil Insert UNF 1.3/8-12 x 1.5D Recoil Insert UNF 1.1/2-12 x 1.5D

10 5 5 5 3 3 3 1 1 1 1

RE24083 RE24093 RE24103 RE24123 RE24143 RE24163 RE24163-14 RE24183 RE24203 RE24223 RE24243

DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert BSW 7/16-14 x 1.5D Recoil Insert BSW 1/2-12 x 1.5D

10 10

RE22073 RE22083

List Price

UNF THREAD INSERT PACKS DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert UNF #3-56 x 1.5D Recoil Insert UNF #4-48 x 1.5D Recoil Insert UNF #6-40 x 1.5D Recoil Insert UNF #8-36 x 1.5D Recoil Insert UNF #10-32 x 1.5D Recoil Insert UNF #12-28 x 1.5D Recoil Insert UNF 1/4-28 x 1.5D Recoil Insert UNF 5/16-24 x 1.5D Recoil Insert UNF 5/16-24 x 2D Recoil Insert UNF 3/8-24 x 1.5D Recoil Insert UNF 7/16-20 x 1.5D

10 10 10 10 10 10 10 10 10 10 10

RE24533 RE24543 RE24563 RE24583 RE24603 RE24623 RE24043 RE24053 RE24054 RE24063 RE24073

List Price

List Price

BSW THREAD INSERT PACKS DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert BSW 1/8-40 x 1.5D Recoil Insert BSW 3/16-24 x 1.5D Recoil Insert BSW 1/4-20 x 1.5D Recoil Insert BSW 5/16-18 x 1.5D Recoil Insert BSW 3/8-16 x 1.5D

10 10 10 10 10

RE22023 RE22033 RE22043 RE22053 RE22063

List Price

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL [email protected] | website pandn.co.nz

List Price

THREAD INSERT PACKS IMPERIAL CONTINUED BA THREAD INSERT PACKS DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert 2BA x 1.5D Recoil Insert 4BA x 1.5D

10 10

RE20523 RE20543

List Price

DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert 6BA x 1.5D

10

RE20563

DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert BSF 7/16-18 x 1.5D Recoil Insert BSF 1/2-16 x 1.5D

10 10

RE20073 RE20083

DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert NPT 3/8-18 x 1.5D Recoil Insert NPT 1/2-14 x 1.5D

10 5

RE26063 RE26083

DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert BSP 1/2-14 x 1.5D Recoil Insert BSP 3/4-14 x 1.5D Recoil Insert BSP 1-11 x 1.5D

5 5 3

RE21083 RE21123 RE21163

DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert BSC 7/16-26 x 1.5D Recoil Insert BSC 1/2-26 x 1.5D

10 10

RE26703 RE26803

List Price

BSF THREAD INSERT PACKS DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert BSF 5/16-22 x 1.5D Recoil Insert BSF 3/8-20 x 1.5D

10 10

RE20053 RE20063

List Price

List Price

NPT THREAD INSERT PACKS DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert NPT 1/8-17 x 1.5D Recoil Insert NPT 1/4-18 x 1.5D

10 10

RE26023 RE26043

List Price

List Price

BSP THREAD INSERT PACKS DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert BSP 1/8-28 x 1.5D Recoil Insert BSP 1/4-19 x 1.5D Recoil Insert BSP 3/8-19 x 1.5D

10 10 10

RE21023 RE21043 RE21063

List Price

List Price

BSC THREAD INSERT PACKS DESCRIPTION

Inserts per Kit

Item No.

Recoil Insert BSC 5/16-26 x 1.5D Recoil Insert BSC 3/8-26 x 1.5D

10 10

RE26503 RE26603

List Price

Additional Thread Repair Kit sizes are available - please enquire if your size IS not listed here.

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL [email protected] | website pandn.co.nz

List Price

397 | THREADING

THREADING

THREADING | 398

THREADING ENSAT TAPPER SYSTEM 302 SERIES Standard tapper for metals, wood and plastics. Steel, case hardened, zinc plated. INTERNAL THREAD SIZE Ensat Tapper Insert M3-0.5 Ensat Tapper Insert M4-0.7 Ensat Tapper Insert M5-0.8 Ensat Tapper Insert M6-1 Ensat Tapper Insert M6-1 Ensat Tapper Insert M8-1.25 Ensat Tapper Insert M10-1.5 Ensat Tapper Insert M10-1.25 Ensat Tapper Insert M12-1.75 Ensat Tapper Insert M12-1.5 Ensat Tapper Insert M14-2 Ensat Tapper Insert M16-2 Ensat Tapper Insert M20-2.5

EXTERNAL* THREAD (mm)

LENGTH (mm)

ITEM NO.

5 6.5 8 10 9 12 14 14 16 16 18 20 26

6 8 10 14 12 15 18 18 22 22 24 22 27

RE3020030/16 RE3020040/16 RE3020050/16 RE3020060/16 RE3020061/16 RE3020080/16 RE3020100/16 RE3020106/16 RE3020120/16 RE3020127/16 RE3020140/16 RE3020160/16 RE3020200/16

Ensat Tapper M14-1.25 x 9mm Spark Plug Only Ensat Tapper M14-1.25 x 15mm

LIST PRICE

RE3040140/16 RE3040141/16

UNC/UNF 302 SERIES Standard tapper for metals and plastics (short version). Steel, case hardened, zinc plated yellow chromated. INTERNAL THREAD SIZE Ensat Tapper Insert UNC #8-32 Ensat Tapper Insert UNC 1/4-20 Ensat Tapper Insert UNC 5/16-18 Ensat Tapper Insert UNC 3/8-16 Ensat Tapper Insert UNC 7/16-14 Ensat Tapper Insert UNC 1/2-13 Ensat Tapper Insert UNC 5/8-11 Ensat Tapper Insert UNF 1/4-28 Ensat Tapper Insert UNF 5/16-24 Ensat Tapper Insert UNF 3/8-24 Ensat Tapper Insert UNF 7/16-20 Ensat Tapper Insert UNF 1/2-20 Ensat Tapper Insert UNF 5/8-18

EXTERNAL* THREAD (mm)

LENGTH (mm)

ITEM NO.

6.5 10 12 14 16 18 20 10 12 14 16 18 20

8 14 15 18 22 22 22 14 15 18 22 22 22

RE3020608/16 RE3020625/16 RE3020631/16 RE3020637/16 RE3020644/16 RE3020650/16 RE3020662/16 RE3020725/16 RE3020731/16 RE3020737/16 RE3020744/16 RE3020750/16 RE3020762/16

LIST PRICE

302 40 SERIES Standard tapper for metals, wood and plastics. Stainless steel (304). INTERNAL THREAD SIZE Ensat Tapper S/Steel M3-0.5 Ensat Tapper S/Steel M4-07 Ensat Tapper S/Steel M5-0.8 Ensat Tapper S/Steel M6-1 Ensat Tapper S/Steel M8-1.25 Ensat Tapper S/Steel M10-1.5 Ensat Tapper S/Steel M12-1.75

EXTERNAL* THREAD (mm)

LENGTH (mm)

ITEM NO.

5 6.5 8 10 12 14 16

6 8 10 14 15 18 22

RE3020030/40 RE3020040/40 RE3020050/40 RE3020060/40 RE3020080/40 RE3020100/40 RE3020120/40

* Note: External Thread - Tolerances (ISO 2768-m) in accordance with Works Standard 302.

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL [email protected] | website pandn.co.nz

LIST PRICE

THREADING INSTALLATION & EXTRACTION TOOLS MANUAL INSTALLATIOn TOOLS The manual installation tool is the most practical and simple to use for general applications. This tool may be used to install 1D through to 3D length inserts. Featuring an adjustable collar to suit 1D-3D inserts, and a square drive for trapping. INTERNAL THREAD SIZE

ITEM NO.

M3-0.5 UNC #4-40, UNF #4-48 UNC #6-32 UNC 1/4-20, UNF 1/4-28 0BA, BSF 1/4-26, BSW 1/4-20

PRICE

RE50089-17 RE50077-17 RE50095-16 RE50188-10 RE50188-5

INSERT EXTRACTION TOOLS INTERNAL THREAD SIZE

LENGTH (mm)

Extract Tool 4-40 - 3/8, M3 - M10 Extract Tool 6-32 - 1", M4 - M24

Keyserts

ITEM NO.

RE50002 RE50003

Application

Keyserts are designed to repair damaged threads or for use in original equipment, and provide easy installation and versatility. Featuring a key-locking action that prevents rotation due to vibration or torsion, commercial grade Keyserts can be used in a wide range of materials and applications. Keyserts are available in carbon and stainless steel, and are supplied in thin wall and heavy duty styles.

TRUCKS, RV’S MACHINERY, SMALL ENGINES MOULDS, TOOL AND DIE MRO TASKS

Note: Keyserts are not recommended for use in brittle materials, such as cast iron or plastic.

KEYSERTS keyserts metric DESCRIPTION

PACK QTY

Keysert M4-0.7 C/S H.D. Keysert M4-0.7 S/S H.D. Keysert M5-0.8 C/S Thinwall Keysert M5-0.8 C/S H.D. Keysert M5-0.8 S/S Thinwall Keysert M5-0.8 S/S Thinwall Keysert M5-0.8 S/S H.D. Keysert M6-1 C/S Thinwall Keysert M6-1 C/S Thinwall Keysert M6-1 C/S H.D. Keysert M6-1 S/S Thinwall Keysert M6-1 S/S Thinwall Keysert M6-1 S/S H.D. Keysert M8-1.25 C/S Thinwall Keysert M8-1.25 C/S Thinwall Keysert M8-1.25 C/S H.D.

5

2

5

2

5

Item No. REK75042 REK75047 REK75051P REK75052 REK75056 REK75056P REK75057 REK75061 REK75061P REK75062 REK75066 REK75066P REK75067 REK75081 REK75081P REK75082

List Price

DESCRIPTION Keysert M8-1.25 S/S Thinwall Keysert M8-1.25 S/S Thinwall Keysert M8-1.25 S/S H.D. Keysert M10-1.5 C/S Thinwall Keysert M10-1.5 C/S Thinwall Keysert M10-1.5 C/S H.D. Keysert M10-1.5 S/S Thinwall Keysert M10-1.5 S/S Thinwall Keysert M10-1.5 S/S H.D. Keysert M12-1.75 C/S Thinwall Keysert M12-1.75 C/S Thinwall Keysert M12-1.75 C/S H.D. Keysert M12-1.75 S/S Thinwall Keysert M12-1.75 S/S Thinwall Keysert M14-2 C/S H.D. Keysert M14-2 S/S H.D.

PACK QTY 2

4

2

4

2

Item No. REK75086 REK75086P REK75087 REK75101 REK75101P REK75102 REK75106 REK75106P REK75107 REK75121 REK75121P REK75122 REK75126 REK75126P REK75142 REK75147

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL [email protected] | website pandn.co.nz

List Price

399 | THREADING

THREADING

THREADING | 400

THREADING KEYSERTS CONTINUED KEYSERTS METRIC CONTINUED DESCRIPTION

PACK QTY

Keysert M16-2 C/S H.D Keysert M16-2 S/S H.D. Keysert M20-2.5 C/S H.D. Keysert M24-3 C/S H.D. Keysert M10-1.25 C/S Thinwall Keysert M10-1.25 C/S H.D Keysert M10-1.25 S/S Thinwall

4

Item No.

List Price

REK75162 REK75167 REK75202 REK75242 REK77101P REK77102 REK77106

DESCRIPTION Keysert M14-1.5 C/S H.D. Keysert M16-1.5 C/S H.D. Keysert M12-1.25 C/S Thinwall Keysert M12-1.25 S/S Thinwall Keysert M18-1.5 C/S H.D. Keysert M20-1.5 C/S H.D.

PACK QTY

4

Item No.

List Price

REK77142 REK77162 REK78121P REK78126 REK78182 REK78202

keyserts UNC DESCRIPTION

PACK QTY

Keysert UNC #8-32 C/S H.D. Keysert UNC #8-32 S/S H.D. Keysert UNC #10-24 C/S Thinwall Keysert UNC #10-24 S/S Thinwall Keysert UNC 1/4-20 C/SThinwall Keysert UNC 1/4-20 C/S H.D. Keysert UNC 1/4-20 S/S Thinwall Keysert UNC 1/4-20 S/S H.D. Keysert UNC 5/16-18 C/S Thinwall Keysert UNC 5/16-18 S/S Thinwall Keysert UNC 3/8-16 C/S Thinwall Keysert UNC 3/8-16 C/S H.D. Keysert UNC 3/8-16 S/S Thinwall

8 7 4 7 3 7 3

Item No.

List Price

REK73582 REK73587 REK73601P REK73606 REK73041P REK73042 REK73046P REK73047 REK73051P REK73056P REK73061P REK73062 REK73066P

DESCRIPTION Keysert UNC 3/8-16 S/S H.D. Keysert UNC 7/16-14 C/S Thinwall Keysert UNC 7/16 C/S H.D. Keysert UNC 7/16-20 S/S Thinwall Keysert UNC 1/2-13 C/S Thinwall Keysert UNC 1/2-13 C/S H.D. Keysert UNC 9/16-12 S/S H.D. Keysert UNC 5/8-11 C/S H.D. Keysert UNC 5/8-11 S/S H.D. Keysert UNC 3/4-10 C/S H.D. Keysert UNC 7/8-9 C/S H.D. Keysert UNC 1"-8 C/S H.D.

PACK QTY 7

7

Item No.

List Price

REK73067 REK73071P REK73072 REK73076 REK73081P REK73082 REK73097 REK73102 REK73107 REK73122 REK73142 REK73162

keyserts UNF DESCRIPTION

PACK QTY

Item No.

Keysert UNF #10-32 C/S Thinwall Keysert UNF #10-32 S/S Thinwall Keysert UNF 1/4-28 C/S Thinwall Keysert UNF 1/4 -28 S/S Thinwall Keysert UNF 5/16-24 C/S Thinwall Keysert UNF 5/16-24 C/S H.D Keysert UNF 5/16-24 S/S Thinwall Keysert UNF 3/8-24 C/S Thinwall Keysert UNF 3/8-24 S/S Thinwall Keysert UNF 7/16-20 C/S Thinwall

8

REK74601P REK74606 REK74041P REK74046 REK74051P REK74052 REK74056P REK74061P REK74066 REK74071P

7 7

7 7

List Price

DESCRIPTION

PACK QTY

Item No.

Keysert UNF 1/2-20 C/S Thinwall Keysert UNF 1/2-20 S/S Thinwall Keysert UNF 9/16-18 C/S H.D Keysert UNF 5/8-18 C/S H.D. Keysert UNF 5/8-18 S/S H.D. Keysert UNF 3/4-16 C/S H.D. Keysert UNF 7/8-14 C/S H.D. Keysert UNF 1-12 C/S H.D. Keysert UNF 1-14 C/S H.D.

7

REK74081P REK74086 REK74092 REK74102 REK74107 REK74122 REK74142 REK74162 REK74162-14

PACK QTY

Item No.

List Price

Additional sizes are available - please enquire if your size IS not listed here.

KEYSERT INSTALLATION TOOLS DESCRIPTION

PACK QTY

Keysert Tool M4-0.7 Keysert Tool 1/4, M6 Keysert Tool 5/16, M8 Keysert Tool 3/8, 7/16, M10

Item No. REK71042 REK72250 REK72312 REK72375

List Price

DESCRIPTION Keysert Tool 1/2, 9/16, M12 Keysert Tool 5/8, M16 Keysert Tool M20-2.5

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL [email protected] | website pandn.co.nz

REK72500 REK72625 REK72875

List Price

Insert Taps Recoil® taps differ from standard taps dimensionally and only Recoil® Screw Thread Insert (STI) taps are suitable for use with Recoil® wire thread inserts. They have a larger diameter but the same pitch as a standard tap in order to accomodate the wire insert. Recoil® taps are available with taper, intermediate and bottoming leads.

TAPS TAPS METRIC COARSE DESCRIPTION

Item No.

Recoil Tap M2-0.4 Inter Recoil Tap M2-0.4 Bottom Recoil Tap M2-0.4 Spiral Flute Recoil Tap M2.5-0.45 Taper Recoil Tap M2.5-0.45 Inter Recoil Tap M2.5-0.45 Bottom Recoil Tap M3-0.5 Taper Recoil Tap M3-0.5 Inter Recoil Tap M3-0.5 Bottom Recoil Tap M3-0.5 Spiral Flute Recoil Tap M3.5-0.6 Inter Recoil Tap M4-0.7 Inter Recoil Tap M4-0.7 Bottom Recoil Tap M4-0.7 Spiral Flute Recoil Tap M5-0.8 Taper Recoil Tap M5-0.8 Inter Recoil Tap M5-0.8 Bottom Recoil Tap M5-0.8 Spiral Flute Recoil Tap M6-1 Inter Recoil Tap M6-1 Bottom Recoil Tap M6-1 Spiral Flute Recoil Tap M7-1 Taper Recoil Tap M7-1 Inter Recoil Tap M7-1 Bottom Recoil Tap M8-1.25 Taper Recoil Tap M8-1.25 Inter Recoil Tap M8-1.25 Bottom Recoil Tap M8-1.25 Spiral Flute Recoil Tap M9-1.25 Inter Recoil Tap M10-1.5 Taper

RE45025 RE45026 RE45029 RE45254 RE45255 RE45256 RE45034 RE45035 RE45036 RE45039 RE45355 RE45045 RE45046 RE45049 RE45054 RE45055 RE45056 RE45059 RE45065 RE45066 RE45069 RE45074 RE45075 RE45076 RE45084 RE45085 RE45086 RE45089 RE45095 RE45104

List Price

DESCRIPTION

Item No.

Recoil Tap M10-1.5 Inter Recoil Tap M10-1.5 Bottom Recoil Tap M10-1.5 Pilot Nose Recoil Tap M10-1.5 Spiral Flute Recoil Tap M11-1.5 Int Recoil Tap M12-1.75 Inter Recoil Tap M12-1.75 Bottom Recoil Tap M12-1.75 Spiral Flute Recoil Tap M14-2 Inter Recoil Tap M14-2 Bottom Recoil Tap M15-2 Inter Recoil Tap M16-2 Taper Recoil Tap M16-2 Inter Recoil Tap M16-2 Spiral Flute Recoil Tap M20-2.5 Taper Recoil Tap M20-2.5 Inter Recoil Tap M20-2.5 Bottom Recoil Tap M22-2.5 Inter Recoil Tap M24-3 Inter Recoil Tap M24-3 Bottom Recoil Tap M24-3 Spiral Flute Recoil Tap M30-3.5 Taper Recoil Tap M30-3.5 Inter Recoil Tap M30-3 Inter Recoil Tap M30-3.5 Bottom Recoil Tap M33-3.5 Inter Recoil Tap M36-4 Inter Recoil Tap M39-4 Inter

RE45105 RE45106 RE45107 RE45109 RE45115 RE45125 RE45126 RE45129 RE45145 RE45146 RE45155 RE45164 RE45165 RE45169 RE45204 RE45205 RE45206 RE45225 RE45245 RE45246 RE45249 RE45304 RE45305 RE45305-3 RE45306 RE45335 RE45365 RE45395

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL [email protected] | website pandn.co.nz

List Price

401 | THREADING

THREADING

THREADING | 402

THREADING TAPS CONTINUED TAPS METRIC MEDIUM & FINE DESCRIPTION

Item No.

Recoil Tap M8-1 Taper Recoil Tap M8-1 Inter Recoil Tap M10-1 Taper Recoil Tap M10-1 Inter Recoil Tap M10-1 Bottom Recoil Tap M10-1 Pilot Nose Recoil Tap M10-1.25 Taper Recoil Tap M10-1.25 Inter Recoil Tap M10-1.25 Pilot Nose Recoil Tap M11-1.25 Inter Recoil Tap M11-1.25 Bottom Recoil Tap M12-1.25 Taper Recoil Tap M12-1.25 Inter Recoil Tap M12-1.25 Bottom Recoil Tap M12-1.25 Pilot Nose Recoil Tap M12-1.5 Taper Recoil Tap M12-1.5 Inter Recoil Tap M12-1.5 Bottom Recoil Tap M14-1.25 Taper Recoil Tap M14-1.25 Inter Recoil Tap M14-1.25 Bottom

RE47084 RE47085 RE48104 RE48105 RE48106 RE48107 RE47104 RE47105 RE47107 RE47115 RE47116 RE48124 RE48125 RE48126 RE48127 RE47124 RE47125 RE47126 RE48144 RE48145 RE48146

List Price

DESCRIPTION

Item No.

Recoil Tap M14-1.25 Pilot Nose Recoil Tap M14-1.5 Taper Recoil Tap M14-1.5 Inter Recoil Tap M14-1.5 Bottom Recoil Tap M16-1.5 Taper Recoil Tap M16-1.5 Inter Recoil Tap M16-1.5 Bottom Recoil Tap M18 - 1.5 Taper Recoil Tap M18-1.5 Inter Recoil Tap M18-2.0 Bottom Recoil Tap M20-1.5 Taper Recoil Tap M20-1.5 Inter Recoil Tap M20-1.5 Bottom Recoil Tap M24-1.5 Inter Recoil Tap M24-2 Taper Recoil Tap M24-2 Inter Recoil Tap M26-1.5 Inter Recoil Tap M30-1.5 Inter Recoil Tap M36-3 Inter Recoil Tap M39-3 Inter Recoil Tap M42-3 Inter

RE48147 RE47144 RE47145 RE47146 RE47164 RE47165 RE47166 RE48184 RE48185 RE47186 RE48204 RE48205 RE48206 RE48245 RE47244 RE47245 RE48265 RE48305 RE47365 RE47395 RE47425

DESCRIPTION

Item No.

Recoil Tap UNF 7/16-20 Bottom Recoil Tap UNF 1/2-20 Inter Recoil Tap UNF 1/2-20 Bottom Recoil Tap UNF 1/2-20 Spiral Flute Recoil Tap UNF 9/16-18 Taper Recoil Tap UNF 9/16-18 Inter Recoil Tap UNF 5/8-18 Taper Recoil Tap UNF 5/8-18 Inter Recoil Tap UNF 5/8-18 Bottom Recoil Tap UNF 5/8-18 Spiral Flute Recoil Tap UNF 3/4-16 Inter Recoil Tap UNF 3/4-16 Bottom Recoil Tap UNF 3/4-16 Spiral Flute Recoil Tap UNF 7/8-14 Taper Recoil Tap UNF 7/8-14 Inter Recoil Tap UNF 7/8-14 Bottom Recoil Tap UNF 1"-12 Inter

RE44076 RE44085 RE44086 RE44089 RE44094 RE44095 RE44104 RE44105 RE44106 RE44109 RE44125 RE44126 RE44129 RE44144 RE44145 RE44146 RE44165

List Price

TAPS UNF DESCRIPTION

Item No.

Recoil Tap UNF #8-36 Inter Recoil Tap UNF #8-36 Spiral Recoil Tap UNF #10-32 Taper Recoil Tap UNF #10-32 Inter Recoil Tap UNF #10-32 Bottom Recoil Tap UNF #10-32 Spiral Point Recoil Tap UNF 1/4-28 Taper Recoil Tap UNF 1/4-28 Inter Recoil Tap UNF 1/4-28 Bottom Recoil Tap UNF 1/4-28 Spiral Flute Recoil Tap UNF 5/16-24 Taper Recoil Tap UNF 5/16-24 Inter Recoil Tap UNF 5/16-24 Bottom Recoil Tap UNF 5/16 Spiral Flute Recoil Tap UNF 3/8-24 Taper Recoil Tap UNF 3/8-24 Inter Recoil Tap UNF 3/8-24 Bottom Recoil Tap UNF 7/16-20 Taper

RE44585 RE44589 RE44604 RE44605 RE44606 RE44608 RE44044 RE44045 RE44046 RE44049 RE44054 RE44055 RE44056 RE44059 RE44064 RE44065 RE44066 RE44074

List Price

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL [email protected] | website pandn.co.nz

List Price

TAPS CONTINUED TAPS UNC DESCRIPTION

Item No.

Recoil Tap UNC #2-56 Inter Recoil Tap UNC #3-48 Bottom Recoil Tap UNC #4-40 Taper Recoil Tap UNC #4-40 Inter Recoil Tap UNC #4-40 Bottom Recoil Tap UNC #4-40 Spiral Flute Recoil Tap UNC #5-40 Inter Recoil Tap UNC #6-32 Taper Recoil Tap UNC #6-32 Inter Recoil Tap UNC #6-32 Bottom Recoil Tap UNC #8-32 Taper Recoil Tap UNC #8-32 Inter Recoil Tap UNC #8-32 Bottom Recoil Tap UNC #8-32 Spiral Point Recoil Tap UNC #8-32 Spiral Flute Recoil Tap UNC #10-24 Taper Recoil Tap UNC #10-24 Inter Recoil Tap UNC #10-24 Bottom Recoil Tap UNC #10-24 Spiral Flute Recoil Tap UNC 1/4-20 Taper Recoil Tap UNC 1/4-20 Inter Recoil Tap UNC 1/4-20 Spiral Flute Recoil Tap UNC 5/16-18 Inter Recoil Tap UNC 5/16-18 Bottom Recoil Tap UNC 5/16-18 Spiral Flute Recoil Tap UNC 3/8-16 Taper Recoil Tap UNC 3/8-16 Inter

RE43525 RE43536 RE43544 RE43545 RE43546 RE43549 RE43555 RE43564 RE43565 RE43566 RE43584 RE43585 RE43586 RE43588 RE43589 RE43604 RE43605 RE43606 RE43609 RE43044 RE43045 RE43049 RE43055 RE43056 RE43059 RE43064 RE43065

List Price

DESCRIPTION

Item No.

Recoil Tap UNC 3/8-16 Bottom Recoil Tap UNC 3/8-16 Spiral Flute Recoil Tap UNC 7/16-14 Inter Recoil Tap UNC 7/16-14 Bottom Recoil Tap UNC 7/16-14 Spiral Flute Recoil Tap UNC 1/2-13 Taper Recoil Tap UNC 1/2-13 Inter Recoil Tap UNC 1/2-13 Bottom Recoil Tap UNC 1/2-13 Spiral Flute Recoil Tap UNC 9/16-12 Inter Recoil Tap UNC 9/16-12 Bottom Recoil Tap UNC 5/8-11 Taper Recoil Tap UNC 5/8-11 Inter Recoil Tap UNC 5/8-11 Bottom Recoil Tap UNC 5/8-11 Spiral Point Recoil Tap UNC 5/8-11 Spiral Flute Recoil Tap UNC 3/4-10 Taper Recoil Tap UNC 3/4-10 Inter Recoil Tap UNC 3/4-10 Bottom Recoil Tap UNC 3/4-10 Spiral Flute Recoil Tap UNC 7/8-9 Inter Recoil Tap UNC 7/8-9 Bottom Recoil Tap UNC 1"-8 Taper Recoil Tap UNC 1"-8 Inter Recoil Tap UNC 1"-8 Bottom Recoil Tap UNC 1.1/4 -7 Inter

RE43066 RE43069 RE43075 RE43076 RE43079 RE43084 RE43085 RE43086 RE43089 RE43095 RE43096 RE43104 RE43105 RE43106 RE43108 RE43109 RE43124 RE43125 RE43126 RE43129 RE43145 RE43146 RE43164 RE43165 RE43166 RE43205

DESCRIPTION

Item No.

Recoil Tap BSW 1/2-12 Bottom Recoil Tap BSW 5/8-11 Inter Recoil Tap BSW 5/8-11 Bottom Recoil Tap BSW 3/4-10 Taper Recoil Tap BSW 3/4-10 Inter Recoil Tap BSW 7/8-9 Bottom Recoil Tap BSW 1"-8 Inter Recoil Tap BSW 1"-8 Bottom

RE42086 RE42105 RE42106 RE42124 RE42125 RE42146 RE42165 RE42166

List Price

TAPS BSW DESCRIPTION

Item No.

Recoil Tap BSW 1/4-20 Taper Recoil Tap BSW 1/4-20 Inter Recoil Tap BSW 5/16-18 Inter Recoil Tap BSW 5/16-18 Bottom Recoil Tap BSW 3/8-16 Inter Recoil Tap BSW 7/16-14 Taper Recoil Tap BSW 1/2-12 Taper Recoil Tap BSW 1/2-12 Inter

RE42044 RE42045 RE42055 RE42056 RE42065 RE42074 RE42084 RE42085

List Price

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL [email protected] | website pandn.co.nz

List Price

403 | THREADING

THREADING

THREADING | 404

THREADING TAPS CONTINUED TAPS BSF DESCRIPTION

Item No.

Recoil Tap BSF 1/4-26 Inter Recoil Tap BSF 5/16-22 Inter Recoil Tap BSF 5/16-22 Bottom Recoil Tap BSF 3/8-20 Taper Recoil Tap BSF 3/8-20 Bottom

RE40045 RE40055 RE40056 RE40064 RE40066

List Price

DESCRIPTION

Item No.

Recoil Tap BSF 1/2-16 Inter Recoil Tap BSF 9/16-16 Inter Recoil Tap BSF 5/8-14 Inter Recoil Tap BSF 7/8-11 Bottom

RE40085 RE40095 RE40105 RE40146

DESCRIPTION

Item No.

Recoil Tap BSP 3/8-19 Inter Recoil Tap BSP 1/2-14 Inter Recoil Tap BSP 5/8-14 Inter

RE41065 RE41085 RE41105

List Price

TAPS BSP DESCRIPTION

Item No.

Recoil Tap BSP 1/8-28 Inter Recoil Tap BSP 1/4-19 Inter Recoil Tap BSP 3/8-19 Taper

RE41025 RE41045 RE41064

List Price

TAPS NPT DESCRIPTION

Item No.

Recoil Tap Npt 1/8 - 27 Inter

RE46025

List Price

TAPS BA DESCRIPTION

Item No.

Recoil Tap 2BA Taper Recoil Tap 2BA Inter Recoil Tap 2BA Bottom

RE40524 RE40525 RE40526

List Price

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL [email protected] | website pandn.co.nz

List Price

Thread Gauges Recoil® gauges measure the tapped hole to ensure optimum insert performance once installed. Thread gauging is recommended wherever precision threads are required. If the finished tapped hole gauges satisfactorily, the installed insert will be within the thread tolerance.

PITCH/TPI GAUGES TAPS METRIC COARSE DESCRIPTION

Item No.

Recoil Metric Thread Gauge Recoil Thread Pitch Gauges - Metric (0.25-6.0) & Unified (4 - 42 V Thread)

List Price

RE65000 RE69000

Additional sizes are available - please enquire if your size IS not listed here.

REGRIP This specially formulated silicon carbide solution assists with the quick and easy removal of broken or damaged bolts, screws and nuts by improving grip of wrenches, spanners and other tools. DESCRIPTION Recoil Re-Grip 15ml bottle

Item No. REGRIP

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL [email protected] | website pandn.co.nz

List Price

405 | THREADING

THREADING