Hot Stamping 405 FM 3083 Rd PO BOX 2468 Conroe, TX 77301 USA
[email protected]
Model
25
The Model 25 is the perfect light weight table top unit. Simple and compact and can be easily transported to home or office. This is a perfect machine for imprinting napkins, ribbons, leather name tags, small scrapbook albums, stationary, plastic name badges, bibles, military badges and much more! The Model 25 is specifically designed to meet the needs of an entry level hot-stamper, without breaking the budget.
Standard Features • Heat Control • Fixed Platform with Lineboard - 6” x 10” • Typeholder # 7, 1” x 5 3/4” • Fixed Daylight Opening • Heavy Duty Solid Cast Aluminum Casting • Light Weight for mobile applications
Optional Accessories
• Work Holders • MA/10, 6” Platform Gauge • Optional Automatic Roll Feed Advances foil after each imprint • Typeholder # 80, 2” x 5 3/4”
Machine Specifications Work Table Size
M25 with 7M Multiline Typeholder
Model 25 6” x 10”
Throat Depth
5”
Clearance
Fixed
Dimensions (LxWxH)
8” x 10” x 14”
Weight (Crated)
25 lbs. (28 lbs.)
1-800-327-9420
www.Campbell-Randall.com
Hot Stamping
Optional Accessories
Model
55
Manually Operated
Foil Stamping Machine Automatic Foilfeed
• # 719 : 1” x 9” • # 819 : 2” x 9” • # 319 : 3” x 9”
Tiltable Type Holder Options Multiline Feature Additional
• • • • •
# 7 : 1” x 5-3/4” # 80 : 2” x 5-3/4” # 79 : 1” x 9” #809 : 2” x 9 #305 : 3” x 5-3/4”
Multiline Typeholder
Right Angle Gauge
Precision Linefinder
Machine Light
Two-Way Platform
Model 55 is easy to use and will print on a wide variety of products. The MODEL 55 is made from one solid casting making it smaller, lighter and more mobile than our other machines. At 50 pounds it is the perfect table top machine for any small business and can be easily transported on the road.
Standard Features
Mechanical Counter
Pencil Attachment
• Heat Control • Large Imprint Area - 18 square inches (2” x 9”) • Large Lined Platform - 12” x 12” with 1/4” line grid • Small Work Platform - 3-7/8” x 7” for baggage and small items • Optional Automatic Roll Feed - Advances foil after each imprint • 9” Throat Depth - uninhibited imprint area in the center of an 18” piece • Type Holder Capacity - Takes either 5-3/4” or 9” of type, depending on type holder selected with machine (1”, 2” or 3” deep)
• Tiltable Type Holder - Front loading and self centering type holders allow you to set type or dies right into the machine for fast and easy setup.
• Fixed Daylight Opening • Heavy Duty Solid Cast Aluminum Casting • Light Weight for mobile applications
Optional Accessories Matchbook Attachment
Ribbon Guide Attachment
Hot Stamping
Honey Comb Flat Die Holder
• Work Holders • Automatic Roll Feed • Precision Line finder • Machine Light • Right Angle Platform Gauge • Pencil Attachment • Match Attachment • Custom Fixtures Available
Machine Specifications Work Table Size X / Y Table
Model 55 12” x 12” No
Throat Depth
9”
Precision Line Finder
Yes
Air Upgrade
No
Clearance
Fixed
Dimensions (LxWxH)
12” x 16” x 22” 50 lbs. (65 lbs.)
Weight (Crated)
www.Campbell-Randall.com
1-800-327-9420
Model
86
Manually Operated Foil Stamping Machine
Model
86a/a
Air Operated Foil Stamping Machine
Semi Automatic with Heat & Dwell Control
The Model 86 is an excellent choice for stamping individual names, monograms, corporate logos and multiple line imprinting in gold, silver or pigment in color. A popular choice for both commercial manufactures and retailers.
Applications: Foil-Stamp, Deboss, Leather, Plastic, Wood, Vinyl, Paper, Ribbons, etc. Capable of printing products like leather bags, upholstery, books, binders, document folders, stationary, napkins, cards, plastic badges, acetate, albums, bibles, wallets, pencils, award ribbons, and much more. Standard Features
• Heat Control • Large Imprint Area - 18 square inches (2” x 9”) • Large Lined Platform - 12” x 12” with 1/4” line grid • Small Work Platform - 3-7/8” x 7” for baggage and small items • Optional Automatic Roll Feed - Advances foil after each imprint • 9” Throat Depth - uninhibited imprint area in the center of an 18” piece • Type Holder Capacity - Takes either 5-3/4” or 9” of type, depending on type holder selected with machine (1”, 2” or 3” deep)
• Tiltable Type Holder - Front loading and self centering type holders allow you
The Model 86 A/A (Air/Automatic) is easy to use and extremely versatile. This model has all the features and benefits of the Model 86, plus the special addition of a semi-automatic air cylinder system. The Model 86 A/A is a must for heavy production demands. This system provides the operator with increased speed and accuracy and eliminates manual fatigue and misprints. Pressure and dwells are automatically controlled by the air unit to provide a perfect print every time. The OSHA approved safety handle control unit activates the machine with the touch of both hands on either side of the control. The Model 86 A/A is an excellent choice for high volume imprinting. Notice: The machine is equipped with an OSHA approved hand control unit in accordance with OSHA regulations. The use of fott switches on this machinery lacking effective point of operation safeguards ARE NOT in compliance with OSHA standards and may cause serious injury to the operators
to set type or dies right into the machine for fast and easy setup.
Standard Features
• Adjustable Type Head - Allows you to raise the printing head to give a maximum of 6 inch clearance between the type and the printing surface.
• Heavy Duty Solid Cast Aluminum Casting
Optional Accessories
• Work Holders • Automatic Roll Feed • Air Operated Model Upgrade Kit • Two-way Adjustable Platform • Precision Line finder • Machine Light • Right Angle Platform Gauges • Pencil Attachment • Match Attachment • Custom Fixtures Available
1-800-327-9420
Machine Specifications
Model 86
Model 86A/A
X / Y Table
Yes
Yes
Throat Depth
9”
9”
Precision Line Finder
Yes
Yes
Work Table Size
12” x 12”
12” x 12”
Air Upgrade
Optional
Yes
Clearance
Variable 6” max
Variable 6” max
Dimensions (LxWxH)
12” x 18” x 29”
12” x 18” x 38”
Weight (Crated)
95 lbs. (110 lbs.)
130 lbs.(145 lbs.)
• Same as Model 86 • Semi-Automatic air control system • Adjustable dwell timer control • OSHA safety hand control unit • 1/4” NPT universal air fittings Suggested Compressor Requirements • Compressor Size = 1.5 HP (1.5 CFM) • Line Pressure 100 lbs/min • Operating Pressure = 80 lbs
Optional Accessories • Same as Model 86 • Air Counter • Multi-Stage Cylinder for 1-Ton Pressure
www.Campbell-Randall.com
Hot Stamping
Model
POLYPRES ----AIR POWER----
Model
TMA-300 Automatic Stamping Machine
Pneumatic Hot Stamping & Punching Machine
for numbering and printing strap goods
The model TMA-300 is designed to heat emboss / stamp belts or similar leather or synthetic articles on an aumoatic line.
Designed for a variety of applications, such as hot stamping, heat embossing, molding, perforations, and light duty cutting. Useful for making small leather goods, wallets, stamping belts, straps, watch straps, etc.
Standard Features
• The machine can emboss up to a
Standard Features
maximum length of 11” (280mm)
• Can be set with variety of numbering
• Pneumatic Power 1 ton (900 Kg) • Working Area 5.9″ x 5.9″ (150×150 mm) • Digital Temperature Control up to 480°F (250 °C • Embossing with automatic foil feed • Mechanical stroke limit stop • Led lamp • Self centering guides
devices and embossing tools
• The operator simply selects the
embossing area and then inserts the belt from one end. • Personalized numbering devices and embossing tools can be supplied on request. • The entire embossing line can be completely automated (TECNO SYSTEM 55 and 60).
• Ergonomic pedestal base. • Stamping length is 6-5/8” (170mm)
Optional Accessories
• • • • •
Light Curtain Safety Barrier (*LX ) Upper and Lower Heat Control ( *2R) Work table for belts Personalized index wheels Dies made to order
Specifications
Specifications
Pressure Rating
1 ton (900 kg)
Standard Voltage
220V / 1 ph
Air Consumption
24 N.l.
Stamping Length
6” (150mm)
Dimensions (LxWxH)
40 x 24 x 49 in. (100 x 60 x 125 cm)
Net Weight
216 lbs. (98 kg)
Hot Stamping
Pressure Rating
1/2 ton (430 kg)
Standard Voltage
230V / 60 hz / 1 ph
11” (280mm) Air Consumption 0.02 cubic ft /cycle (0.45 lt) Stamping Length Air Pressure Strap Width 85 psi (6 bar) 9/16” to 2-3/4” (15-70mm) 27 x 25 x 50 in. Dimensions Net Weight 310 lbs. (140 kg) (LxWxH) (68 x 64 x 126 cm)
www.Campbell-Randall.com
1-800-327-9420
Model
AC-269
----AIR POWER----
Hot Stamp Machine With Optional Indexing Wheels
The model AC-269 is a reinvented version of the long lasting AC6-9 series. We took the best features of the 40 year old model and created a stronger and more adaptable machine designed to stamp belts and other leather and synthetic articles. This table top machine is a real labor savor, taking the skill out of repeat stamping operations. It can easily stamp a gross of belts in 5 minutes. A variety of stamping heads can be installed to emboss a simple logo, or combine logo dies with manually indexed number and letter wheels. In one operation a strap can be labeled with a logo, origin, size, and article number, with the later options adaptable with a convenient rotation on the index. Stamping The optional foil feed attachment permits stamping with metallic or pigment foils. Simple, accurate and rugged, built for continuous operation. Special attachments can be fitted upon request.
Standard Features
• Maximum Stamping Area 2” x 9” • Work Table 8” x 10” • Double Acting 3/4Ton Cylinder, 2-3/4” Stroke • Adjustable Height • Dwell Timer • Lubro Control - Air Regulator - Filter • Thermal Temp Heat Control - 110 or 220Vac (single phase) • Compressed Air Requirements: 5 cfm at 100 psi - 1 HP
Optional Accessories
• Various Stamping Head sizes • Manual Set Index Wheels • Self Centering Guide for Strap Goods • Machine Stand • Adjustable Back Guide • Work Holders • Side to side roll leaf feed - Stamp with or without foil
Specifications Pressure Rating Air Consumption Air Pressure Dimensions (LxWxH)
3/4 ton 0.14 cubic ft /cycle (4 lt) 100 psi (7 bar)
Stamping Area Bed Size
30 x 20 x 30 in.
Head Weight
Power Supply
110 or 220Vac (1 ph) 9” x 2” 9” x 5”
200 lbs.
Hot Stamping Accessories Stamping Foil • Available in Metallics, Colors, and Speciality Foils • Various colors to choose from • Cut to width in 200ft or 400ft rolls
Replacement Parts • • • •
Heaters Heat Controls Index Wheels Available for various brands & models
Embossing Dies Made to Order • Magnesium • Type Sets • Brass
1-800-327-9420
www.Campbell-Randall.com
Hot Stamping
Campbell-Randall Machinery Co.
405 FM 3083 Rd PO BOX 2468 Conroe, TX 77301 USA TeL: 1-800-327-9420 / 1-936-539-1400 Fax: 1-936-539-1411
[email protected]
Model
SP-2CM
Hot Stamping Machine • Pneumatic printing machine suitable for printing large items like handbags, wallets, shoes, labels, upholstery etc. • Large work surface with pneumatic table clamps • Programmable functions through PLC touchscreen: Temperature, Dwell Time, Stamping Position • Position can be modified through PLC without moving material • Use with or without stamping foil for color inlays. • CE Compliant
TECHNICAL DATA
Hot Stamping
Max. Pressure
400 kg / 6 bar
Dimensions (LxWxH)
59 x 38 x 63 in. (150 x 96 x 160 cm)
Air Supply
6 bar
Power Supply
220VAC 50/60 Hz 3 ph 0.73 Kw
Net Weight
330 lbs. (150 kgs.)
www.Campbell-Randall.com
1-800-327-9420
Campbell-Randall Machinery Co.
405 FM 3083 Rd PO BOX 2468 Conroe, TX 77301 USA TeL: 1-800-327-9420 / 1-936-539-1400 Fax: 1-936-539-1411
[email protected]
Model
TC500
Automatic Thickness Inspection Machine
Work Process
• The leather is positioned on they conveyor and is feed under the inspection unit. • Two independent sensors survey the leather thickness and compare to the parameters set on the control panel. • If the leather is compliant, it continues through the conveyor to the work station; if not it is rejected.
Features
• Operator control powered by INDUSTRIAL PC (Windows CE 5.0) • ETHERNET port with IP Address setting for network connection and download of statistical data. • LCD/TFT 7” monitor with TOUCHSCREEN interface. • Welded Support Base with Electrical Cabinet • Work Conveyor with VARIABLE SPEED • Two Independent Senors to check thickness • Device to reject non-compliant leather • CE Compliant
1-800-327-9420
TECHNICAL DATA Sensor Reading Range
0 - 5 mm
Sensor Accuracy
±0.05 mm
Air Supply
6 bar
Power Supply
400VAC 50/60 Hz 3 ph 0.5 Kw
www.Campbell-Randall.com
Thickness Inspection