10
MISTRAL 12 HOTWIND PREMIUM / HOTWIND SYSTEM 14 MISTRAL accessories 16 HOTWIND accessories 17 VULCAN SYSTEM 18 VULCAN SYSTEM accessories 19 IGNITER 20
www.leister.com
General Catalog Process Heat
11
Hot-air Blowers
Hot-air Blowers
The new MISTRAL: The incomparable hot-air blower. Two model groups are available in this range – the MISTRAL 2, 4, and
6
PREMIUM, and the top-of-the-range
MISTRAL6 SYSTEM. All MISTRAL6 devices are equipped with a maintenance-free brushless blower motor, making them perfectly-suited to continuous operation. The MISTRAL6 SYSTEM can either be operated using its integrated controls or via an external system interface.
New
Hot-air blower
1
2/3
4
5
MISTRAL PREMIUM / SYSTEM 1
Maintenance-free Thanks to its brushless motor, the new MISTRAL 6 PREMIUM / SYSTEM is perfectlysuited to continuous operation
2/3
Innovative: Using the "e-drive" operating unit, the air volume and temperature for the MISTRAL SYSTEM can be adjusted to suit every application.
6/7
Fully-integrated: Main switch with integrated function pushbutton for programming (MISTRAL SYSTEM). 4
5
Multifaceted: Can be operated as a device with integrated control or via an external system interface for integration into a closed-loop system (MISTRAL SYSTEM). Informed: Display with user status information and programming (MISTRAL SYSTEM).
PREMIUM 2
4
Brushless blower motor
8
MISTRAL SYSTEM 6
Innovative design: Special baffle for an even airflow distribution and an optimised, aerodynamic airflow velocity.
7
Integrated: Thermal probe in the MISTRAL SYSTEM for enhanced precision.
8
Quick to connect: Thanks to the integrated air-hose connection adapter with its internal 1-inch thread, an additional adapter is not required.
9
Convenient: Its state-of-the-art industrial design and convenient mounting tabs are sure to impress.
10
Automatic cooling: The MISTRAL SYSTEM is equipped with an automatic cool-down function. In the MISTRAL PREMIUM, the blower and heater can be controlled separately.
11
Easy to switch: The MISTRAL PREMIUM can be switched from an internal to an external potentiometer (optional). As a result, the temperature can even be controlled from the outside.
SYSTEM 6
6
•
•
•
Brush motor with replacement carbon brushes Brush motor
•
Integrated heating element and tool protection
•
•
•
Integrated code switch for potentiometer (internal / external)
•
•
•
•
Infinitely adjustable heating capacity and air volume with the "e-drive"
•
Automatic cool-down function
•
Remote control interface for temperature / air volume
•
Integrated temperature probe
•
Target / actual values display
•
12
9
General Catalog Process Heat
www.leister.com
Hot-air Blowers
Hot-air blower
MISTRAL PREMIUM / SYSTEM Technical data MISTRAL 2, 4, 6 PREMIUM Model 2 4 6 6 6 6 Voltage V~ 230 120 120 230 230 230 Power W 3400 2400 2400 2300 3400 4500 °C 520 490 430 500 510 650 Temperature open Max. air volume (20 °C) l / min. 350 300 350 300 350 400 Pressure kPa 3.5 3.5 2.5 2.5 2.5 3.0 Weight kg 1.4 1.4 1.4 1.4 1.4 1.5 ∅ mm 50 50 50 36.5 50 50 Article no. MISTRAL 2, 4, 6 PREMIUM 147.963 147.964 147.965 148.006 147.966 147.967
MISTRAL PREMIUM Installation dimensions in mm 40.4 C 321
230 V / 4500 W ∅ 50
137.5
352
230 V / 3400 W 120 V / 2400 W ∅ 50 200 V / 3000 W
107.8
322.2
4
230 V / 2300 W ∅ 36,5 106.6 100 V / 1500 W
32
B
91.2 65
ø 38 85.5 89.5 2
MISTRAL 6 SYSTEM 100 120 200 230 230 230 1500 2400 3000 2300 3400 4500 650 650 650 650 650 650
Air volume (20 °C) min. l / min. max. l / min.
100 300
100 350
100 350
100 300
100 350
100 400
Pressure kPa Weight kg ∅ mm Article no. MISTRAL 6 SYSTEM
3.5 1.2 36.5
3.5 1.4 50
2.5 1.4 50
2.5 1.2 36.5
2.5 1.4 50
3.0 1.5 50
147.972 147.969 147.973 147.975 146.701 147.968
Frequency Hz dB (A) Emission levels Dimensions Conformity mark Protection class II
50 / 60 65 see bottom left 2 4
We reserve the right to make technical changes
4.3
A
Model Voltage V~ Power W Temperature open °C
75
700 650 600
105
550
Temperature Temperature°C °C
ø 90
46
88.5
32
154.5
500
4500 W
450
3400 W
400
3000 W
350
2400 W
300
2300 W
250
1500 W
200 200
100 150 200 250 300 350 400 450 100 150 200 250 300 350 400 450
AirAirflow flow[l/min] [l/min]
➡ Accessories page 16
www.leister.com
General Catalog Process Heat
13
HOTWIND PREMIUM / SYSTEM: The versatile hot-air blower. Its brushless motor ensures that this hot-air blower has a long service life. The air volume can now be set infinitely up to 900 l/min via the potentiometer. The wide range of applications makes the new HOTWIND SYSTEM truly impressive: be it as a unit with integrated control or as a unit for integration in a closed-loop control circuit using a system interface.
Leister’s hot-air blowers highlight: The new HOTWIND. 1
4
1
Infinitely adjustable: Potentiometers for stepless adjustment of the heating and blower (PREMIUM and SYSTEM).
2
Remote controlled: Interface with alarm contact in the HOTWIND SYSTEM for controlling the air volume and heat output, using 4 – 20 [ mA ] or 0 – 10 [ V ] signal.
3
Integrated: Temperature probe in the HOTWIND SYSTEM for even greater precision.
4
User friendly: Display on the HOTWIND SYSTEM provides the user with status information.
5
Cleverly combined: Main switch with integral function button for programming (SYSTEM).
6
Cool: The unit is automatically cooled prior to switching off by pressing the function button.
3
6
2
5
HOTWIND SYSTEM
PREMIUM
SYSTEM
Heat output and air volume steplessly adjustable with potentiometer
•
•
Integrated power electronics
•
•
Protection against heating element or device overheating
•
•
Brushless blower motor
•
•
Alarm output
•
Integrated temperature probe
•
Integrated temperature control
•
Remote control interface for temperature or power set point
•
Remote control interface for air volume adjustment
•
Display for showing the setpoint and actual values (°C or °F)
•
14
General Catalog Process Heat
www.leister.com
Hot-air Blowers
Hot-air blower
HOTWIND PREMIUM / SYSTEM Technical data HOTWIND PREMIUM / HOTWIND SYSTEM Voltage V~
120
Power consumption W Frequency Hz
2300 2300 2300 3100 3680 3680 5400 50 / 60
Max. air outlettemperature °C
650
l/min. kPa dB(A)
Air flow (20 °C) Static pressure Noise emission
Weight kg without cable Dimensions Conformity mark Protection classe II Safety standard Certification Without connecting plug Connecting plug (Euro)
HOTWIND PREMIUM
230
650
230
230
650
230
800
230
650
400
650
650
200 – 900 1.0 < 70
0.8 2.2
2.3
2.2
2.4
see below 2 4 3 CCA •
• •
• •
•
•
order. No. HOTWIND PREMIUM
140.095 142.612 142.643 142.608 142.609 140.098 142.644
order. No. HOTWIND SYSTEM *
142.636 142.646 140.096
142.645 142.640 142.641
* Note: Interface with cover, connecting plug included. Installation dimensions in mm Subject to change without notice. Connection voltage non-switchable.
27.5 14
16.5 25
106 83
133 (158 Type 800 °C)
43.6 90 M5x10 deep 171.6
M5x10 deep
160 (185 Type 800 °C) 198 (223 Type 800 °C) 900 900
89.2
102 187
Temperature °C °C Temperature
70
113
179
∅ 62
332 ± 2 (357 ± 2 Type 800 °C)
800 800
2300 W
700 700
3100 W 3700 W
600 600
5400 W
500 500 400 400 300 300 200 200 100 100 00
00
100 100 200 200
at 0°C / 101.3 kPa
300 300 400 400 500 500 600 600 700 700 800 800 900 900 1000 1000 AirAirflow [l/min] flow [l/min]
➡ Accessories page 17
www.leister.com
General Catalog Process Heat
15
Accessories MISTRAL PREMIUM / SYSTEM (∅ 50 mm) a
a
b
a b
a c b
107.254
Flange connector, push-fit a = 70 mm
122.332 122.924
Nozzle adapter, push-fit from (a) ∅ 50 mm to (b) ∅ 62 mm from (a) ∅ 50 mm to (b) ∅ 37 mm
107.255
Extension nozzle, push-fit (a × b) 160 × 36.5 mm
105.950 107.257 105.955 105.952
Tubular nozzle, push-fit (a × b × c) 460 × 300 × 2 mm 590 × 420 × 1.47 mm 836 × 660 × 1 mm 900 × 800 × 0.9 mm
107.256
b a b a
b
a
b
Angled nozzle, push-fit (a × b) shank length 106 x 162, ∅ 50 mm
105.961 107.258
Wide slot nozzle, push-fit (a × b) 45 × 12 mm, lenth 350 mm 70 × 10 mm
106.057 106.060 107.270 106.061
Wide slot nozzle, push-fit (a × b) 100 × 4 mm 150 × 6 mm 150 × 12 mm 300 × 6 mm
107.331
Hinged reflector, push-fit (d × b) 70 × 70 mm
107.340
Shell reflector, push-fit (a × b) 45 × 250 mm
107.327 107.333
Sieve reflector, push-fit (a × b) 70 × 75 mm 130 × 150 mm
107.330
Hinged reflector, push-fit (d × b) 125 × 22 mm
PVC air hose ∅ 38 mm
107.287
Hose clip for ∅ 38 - 60 mm air hose
106.127
Sieve reflector (∅ 50.5 mm) ∅ 65
107.354
Stainless steel filter, push-fit on air intake
106.956
Temperature probe with plug 1 m cable
106.958 106.960 106.962
d b
107.286
Temperature probe extension cable with plug 2m 4m 10 m
123.039
CSS – Temperature controller (MISTRAL SYSTEM )
148.812
External potentiometer box, analogue, 10 kΩ, with 3 m signal cable (MISTRAL PREMIUM)
a
b a b d
16
Accessories for ∅ 36 mm can be found on page 36 (LHS 21 analogue air heaters)
General Catalog Process Heat
www.leister.com
Hot-air Blowers
Accessories HOTWIND PREMIUM / SYSTEM (∅ 62 mm) 125.317 Flange connector, push-fit a = 90 mm
a
107.247 Extension nozzle, push-fit (a × b) 200 × 45 mm
a b
a
141.723
Hand tool kit (handle and protective tube)
113.351
Extension tube, push-fit 275 × ∅ 62 mm
b 105.907 105.919 107.253 114.136 105.906
a
c b
Tubular nozzle, push-fit (a × b × c) 354 × 204 × 4.5 mm 456 × 306 × 3 mm 700 × 550 × 1.7 mm 795 × 655 × 1.5 mm 1100 × 1000 × 4 mm
Angled nozzle, push-fit (a × b) 107.265 shank length 120 x 115, ∅ 62 mm
b a
107.245 Round nozzle, push-fit d = 40 mm
d
Shell reflector, push-fit (a × b) 107.342 50 × 400 mm 106.174 65 × 400 mm 106.175 80 × 400 mm
b a
a
b a
b
107.260 107.259 105.977 107.263 107.262 105.992 105.991
Wide slot nozzle, push-fit (a × b) 85 × 15 mm 150 × 12 mm 200 × 9 mm 250 × 12 mm, with sieve insert 300 × 4 mm 400 × 4 mm 500 × 4 mm
Sieve reflector, push-fit (a × b) 106.143 45 × 75 mm 107.329 70 × 75 mm 107.336 110 × 152 mm 107.335 Sieve reflector, push-fit ∅ 150 mm
107.248 Stainless steel filter, push-fit on air intake
www.leister.com
General Catalog Process Heat
17
VULCAN SYSTEM: The clever muscle man. The muscle man among the hot-air blowers leaves no doubts about its performance. It is compactly built and easy to integrate into industrial processes. Just as Leister’s smaller hot-air blowers, VULCAN SYSTEM can be controlled remotely through a standard analog interface.
Hot-air blower
VULCAN SYSTEM Technical Data VULCAN SYSTEM
6
3 x 230 10
6
3 x 400 11
6
3 x 480 11
143.407 143.406 143.402 140.463 143.405 143.404
Installation dimensions in mm
Frequency 50 Hz 60 Hz
Heating power steplessly adjustable with potentiometer • Standard control interface through a 4 - 20 mA or a • 0 - 10 V signal Integrated power electronics • Protection against heating element or device overheating • Brushless blower motor with FC control • Alarm output • Integrated temperature control • Integrated temperature probe • Display for showing the setpoint and actual values • Max. air outlet temperature °C 650 Max. air flow l/min (20 °C) 3 × 230 V~ 850 1500 Max. air flow l/min (20 °C) 3 × 400 V~ / 3 x 480 V~ 950 1700 Static pressure kPa 3.1 4.0 Noise emission level db (A) 65 Weight (kg) 9.3 Conformity mark 2 Protection classe I 1 Safety standard 3 Certification CCA
163 163
231 231
6kW ∅ (62) 10 / 11kW ∅ (92)
∅ ∅ 60 (60)
∅ 114 (114) ∅
Voltage V~ Power consumption kW Order no.
32 276 276
∅ ∅ 6.5 6.5
58
(44) (44)
∅ 6.5 ∅ 6.5 232 (232)
135 135 410 (410)
18
General Catalog Process Heat
www.leister.com
125.318
a 107.244
d
107.273
a b
Flange connector, push-fit a = 120 mm
125.317
Flange connector, push-fit a = 90 mm
107.245
Round nozzle, push-fit d = 40 mm
107.247
Extension nozzle, push-fit (a × b) 200 × 45 mm
107.265
Angled nozzle, push-fit (a × b) shank length 120 x 115, ∅ 62 mm
a
Round nozzle, push-fit d = 50 mm
d
Extension nozzle, push-fit (a × b) 500 × 60 mm
a b
107.269
a
Angled nozzle, push-fit (a × b) shank length 175 × 175 mm
b
b
a
a c b
a
b
b
106.031 106.035 107.268 106.036 106.033 106.038
Tubular nozzle, push-fit (a × b × c) 1000 × 800 × 2 mm 1185 × 900 × 1.6 mm 1288 × 1000 × 1.5 mm 1535 × 1250 × 1.2 mm 1550 × 1350 × 1.1 mm 2225 × 2000 × 0.8 mm
107.274 106.028 107.272 106.018 106.024 107.267 106.023 106.026
Wide slot nozzle, push-fit (a × b) 130 × 17 mm 220 × 12 mm 300 × 12 mm 400 × 10 mm 500 × 7 mm 500 × 15 mm 600 × 4 mm 600 × 9 mm
107.341
Shell reflector, push-fit (a × b) 160 × 370 mm
107.276
Sieve reflector, push-fit ∅ 260 mm
a
c b
a
b a
a
www.leister.com
107.277
Stainless steel filter, push-fit on air intake
133.517
Thermocouple holder
Hot-air Blowers
Accessories VULCAN SYSTEM 6 kW (∅ 62 mm)
Accessories VULCAN SYSTEM 10 /11 kW (∅ 92 mm)
b a
General Catalog Process Heat
b
105.907 105.919 107.253 114.136 105.906
Tubular nozzle, push-fit (a × b × c) 354 × 204 × 4.5 mm 456 × 306 × 3 mm 700 × 550 × 1.7 mm 795 × 655 × 1.5 mm 1100 × 1000 × 4 mm
107.260 107.259 105.977 107.263 107.262 105.992 105.991
Wide slot nozzle, push-fit (a × b) 85 × 15 mm 150 × 12 mm 200 × 9 mm 250 × 12 mm, with sieve insert 300 × 4 mm 400 × 4 mm 500 × 4 mm
107.342 106.174 106.175
Shell reflector, push-fit (a × b) 50 × 400 mm 65 × 400 mm 80 × 400 mm
106.143 107.329 107.336
Sieve reflector, push-fit (a × b) 45 × 75 mm 70 × 75 mm 110 × 152 mm
107.335
Sieve reflector, push-fit ∅ 150 mm
107.277
Stainless steel filter, push-fit on air intake
19
IGNITER BM4 / BR4 – Ignites just about anything. The new IGNITER ignition blower from Leister has been specially developed for installation into pellet and wood chip boilers. The IGNITER BR4 with 3.4 kW has what it takes. The interface was selected so that the ignition blowers can easily be installed into any heating boiler.
New Easy: Connector plug located directly on the device means easy removal and installation and fewer device configurations.
1
2
Clever: New assembly support for positioning in the furnace.
3
Linked: Connection adapter for air hose located directly on the device with inner 1” thread (no extra accessories needed).
4
Additional: Pipe joint adapter with M14 thread for easy adaptation of the heat conduction lines and extensions (available only for IGNITER BM4).
5
Protected: Heating element protection with phototransistor and device protection via temperature protection circuit.
1
2
3
IGNITER BR4
IGNITER BM4
4
5
20
General Catalog Process Heat
www.leister.com
Hot-air Blowers
Clean ignition process due to optimum heat level.
Accessories IGNITER Technical Data
BM4
IGNITER BM4
with M14 screw adapter
BR4
Voltage
V
120
120
230
230
230
230
230
Frequency
Hz
60
60
50
50
50
50
50
Power rating
1100 1550
600
1100 1600 1100 3400
l/min 20°C
230
230
80
230
230
230
360
Air pressure
kPa
2.48
2.48
0.3
2.48
2.48
2.48
4.00
Max temperature
°C
600
600
500
600
600
600
650
68
68
58
68
68
68
68
Min. air volume
W
142.414
Accessory screw adapter for M14 extensions
107.286
Air hose ∅ 38 mm / ∅ 1.5 in
107.287
Hose bracket
Heating element 230 V ~ 1550 W Heating element 230 V ~ 1050 W Heating element 230 V ~ 550 W 120 V ~ 1500 W Heating element Heating element 120 V ~ 1050 W Heating element (BR4) 230 V ~ 3300 W Power supply cord (rubber) with WAGO plug 3 x 1 mm² x 3 m Power supply cord (silicone) with WAGO plug 3 x 1 mm² x 3 m
Weight
kg
1.0 (without power supply cord)
1.2
142.717 150.871 150.872 142.718 150.873 145.606
Length
mm
283
294
142.967
2
143.131
Noise emission level dB (A)
mm ∅ 90
Aperture
Conformity mark
2
Safety standard
3
Certification
CCA
142.976
Protection class II
4
Article no.
141.882 141.881 139.232 140.711 139.231 144.012 146.296
148.429 (BR4) 142.359
Plug with strain relief, kit (WAGO 770) cable ∅ 4.5 – 8 mm Plug with strain relief, kit (WAGO 770) cable ∅ 8 – 11.5 mm Accessory adapter to TRIAC S Economy heating pipe
We reserve the right to make technical changes. Plug for cable connection and cable are not included.
∅3838 64 ∅ 64.5 ∅7777
BM4 ∅ 31.5 BR4 ∅ 31 50.0
∅9090
14 14
Installation dimensions in mm
BM4 92.5 BR492 102.5
www.leister.com
BM4 283 BR4283 294
95 92
19
19
Installation arrangement
General Catalog Process Heat
21