High Definition Car DVR

User Guide

Ver:11

DVR Configuration

1.MIC port

2.Mute button

5.DVR button

6.HOME button

9.USB port

10.AV IN port

13.SENSOR

3.GPS button

7.Reset button

11.TF card slot1

4.power button

8.Power indicator

12. TF card slot 2

Functions of Buttons

Mute button Press it shortly can turn on/off the sound GPS button Press it shortly will turn into the GPS navigation interface 1.

Button Function 1: Power on/off In power-off state, press and hold for three seconds, the DVR is powered on. In power-on state, press and hold for three seconds, the DVR saves the file automatically and is powered off.

Function 2: Close the display backlight In any state, press shortly will close the backlight of the display, and press it again the backlight will be turn on. DVR button Press the button will enter the car dvr interface. HOME button Press the button shortly can back to main interface. Reset button： If the DVR is crashed, press to power off the DVR.

Introduction of main interface

1.car dvr entrance It is the main features for the A10 products. Click this area, enter for using car dvr, it will bring you different user experience. 2.GPS entrance. Click it one time can enter the default navigation system. 3. Blue tooth entrance Click it one time will enter the setting interface.

4. The application list entrance Click it shortly will enter the system as well as the installation program list. Can click here to enter other application, it is fast and convenient. Pictures as below:

5.mini music player

Click the icon can control the playing of songs, if the songs had been download in the product or in SD card, it will also be smart to get cover songs. 6.Function setting Click to enter the setting interface. 7.Entrance of FM launch With the Innovative FM transmission techniques, click to enter. When FM opened, can set the frequency after click the small page button.

8.Navigation selection Click it to set the application, especially the default navigation settings. 9. picture, video playing The area will get and show the pictures if there are pictures in the SD card, see the picture as below:

Operation Guide

I：Installing the DVR

1. 2.

Power off the automobile engine Insert the TF card into the TF card slot 【Note】Please use a well-branded high-speed TF card(Class 10 or above) with a capacity of at least 512MB. The TF card supports a maximum of 64GB). 3.

Secure the DVR to the rear mirror of the automobile.

4.

Insert the in-vehicle charger into the cigar lighter of the automobile 【Note】Run up the charging cable along one stage of the windscreen when wiring. 5.Install the back camera in the back of the automobile, keep an eye on the direction when installing. Wiring along the roof of the car. Insert the back camera into the slot on the DVR after installing. 6. Adjust the angle of the dvr, ensuring that the camera lens keeps level with the ground. 7.Start up the engine and check whether the DVR is mounted properly. 【Note】If installing it correctly, the indicator will light. The recorder icon will glitter if it comes into video recording. Please check that if the picture in the screen is normal. If the picture is inverted image, please contact us rapidly.

Function Description 1.Operating mode

in the video recording mode, sliding this button can switch the video recording and photograph. 2.Channel switch

There modes for selecting: front camera, back camera, dual camera. 3.Loop video recording

The loop video recording time can be settled as 1 minute, 2 minutes, 5 minutes, OFF. When settled as OFF, the video can’t be coverd. 4.Video quality

The video can be settled as VGA, 720P, 1080P. 5.Picture quality

In photograph mode, the picture can be settled as 100W, 200W, 300W,500W. 6.White balance, exposure, color

About the white balance, please select it accordingly. 7.Color select

Color selecting including default, black and white, puce, negative, sketch, sky blue. 8.Time the watermark

When it opened, the time and date will show on the video and the pictures. 9.Speed watermark

When it opened, the speed watermark will show in the last place of time watermark. 10.Motion detection

Open the motion detection, it will record automatically when detecting the scene changed. And it will also stop recording after the scene not change for 20 seconds. 11.Video mute

When it opened, there is no voice in the video.

12.Recording automatically when powered on.

If it was selected, it will record video automatically after the program started. 13.The program started automatically

Select it, the program will start automatically after the DVR get the power. And if you also select the “recording automatically when powered on”, it will also record video automatically. 14.Picture in picture function(when connect to the back camera, you will see the video in a small window.

When choose the function, you will see the scene of front and back camera in big and small windows. As the picture shows below:

15.Shutdow automatically after powered off.

When choose the function, the DVR will pop-up a dialog box indicating it will shut down after 10 seconds after powered off. Choosing “NO” will stop shut down, choosing “YES” or don’t choose any option, the DVR will shut down after 10 seconds. 16.G-sensor setting

The sensitivity setting can be set as normal, sensitive and very sensitive. As the picture below: 17.Intelligent detection shutdown Settings

Intelligent detection shutdown: Choose the option, In the case of parking but

powered on, , The dvr will shutdown to save energy if the recorder can’t detect changes in the picture for some time. 18.Reversing function

Whenever reversing, the car camera will switch to the back camera, It can be adjusted the balance up and down, please use it according to the actual situation. 19.Small window mode

When exit, choose” small window”, it can be set as small window mode. As in the picture, the small window float on the top of the screen. You can switch the front and back camera by click the button on the top left corner. Move the small window to the lower left corner the window can be closed. Double-click the small window into the car dvr program. 20.Floating icon mode

Under the small window mode, floating icon will appear after sliding off a small window, click to re-open the small window. 21.USB mode

It will show the picture after it connected to computer by a USB cable, click SD card to choose whether to open the SD card storage devices. 22.Bluetooth phone Remember to match the Bluetooth name: VINYOO-J04, the default Bluetooth pass code: 0000, When connect successfully, you can use Bluetooth phone, and you can also upload the contacts from the cell phone to the car dvr. the address book on the phone can be uploaded to the recorder.

23.Wireless remote control key definition

1、Click shortly to open the emergency lock key. 2、Click shortly to open car dvr. 3、Click shortly to return to the main interface. 4、Click shortly to enter the map navigation. 5、Press the on / off screen backlight. 6、Click shortly to answer the call.

Product specification Camera Viewing Angle Rear Camera Pixel Video Frame Rate Video Compression Video Output Format Screen Storage Temperature Operating Temperature Operating Humidity Memory Power

2 megapixels 120 degree FHD2592X1080 30FPS@HD1080P、30FPS@HD720P H.264 NTSC/PAL 5 inch -20℃~60℃ -10℃~60℃ 15-65%RH 4GB～64GB DC5V

Warmth statement: The instructions provided is just for reference only, During using, please according to the products you received. If it caused fines or traffic accident duo to using the product, our company does not assume any responsibility. The car dvr support loop recording, please save important data in time. This product does not exclude the possibility that unforeseen circumstances in the course, if there is no record video or image data, our company does not assume any responsibility. At the same time, we also advocate a civilized traffic, obey traffic rules. By buying this product deemed to have to comply with this statement