HD-SDI BOX CAMERA, 2 MEGAPIXEL ART. HDCAM502A
Please read this manual thoroughly before use, and keep for future reference
Via Don Arrigoni, 5 24020 Rovetta S.Lorenzo (Bergamo) http://www.comelitgroup.com e-mail:
[email protected]
SAFETY PRECAUTIONS Please read before using The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of insulated dangerous Voltage within the product’s enclosure that may be sufficient magnitude to constitute risk of electrical shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance.
1. Please read the service manual in details before using. 2. Don't try to disassemble the chassis or the part easily, in case that touch the power by mistake, is shocked by electricity the danger or caused inside parts to be damaged, 3. Do not attempt to service this unit yourself unless you are authorized to do so. Opening cover may exposure you to dangerous voltage or other hazards. Refer all servicing to qualified personnel only. 4. When being regular, please lock the parts firmly first to prevent the machine damage. 5. Please connect correctly in accordance with the regulation, prevent the machine from using, or striking improperly. 6. Please don't use any organic solution or the corrosively sanitizer to insert and wipe away the chassis outside. While inserting and wiping away, please turn off the power, and use the clean cloth is stained with letting a small amount of branch water, insert and wipe away appearance. 7. Please don't use the camera under the following abominable environments: Temperature is lower than -10 degrees Centigrade, or is higher than +50 degrees Centigrade.
2
Product Features 1. 2. 3. 4.
Full HD 1080p SDI output. CVBS Output. Lens type: DC / Manual (C/CS mount).
5. 6. 7. 8.
30x Sense-Up. Picture-Effect: Mirror. Smart NR. 2DNR & 3DNR function (Digital Noise Reduce).
9. 10. 11. 12.
Defog function. OSD menu language: English/ Chinese OSD operation: buttons 12 VDC input.
3
Key Features
SDI output Our camera provides high definition image up to 2 Megapixels via HD-SDI interface with conventional coaxial connection. For best performance we recommend to use standard RG-59 cable.
CVBS output You could connect the camera directly to a monitor with AV port to see picture or connect to standard DVR with analog recording.
SENSE-UP up to 30x Allow user selectable digital show shutter speed in order to allow extra brightness into a camera thereby providing higher sensitivity in low light conditions.
DEFOG This function improves the clarity of images taken in poor conditions such as fog, smoke, rain or snow. Applied to live or recorded color video, it provides real time results and displays visual details that would normally have been difficult to distinguish
4
Specifications Pick up device
1/3” CMOS Panasonic 2 Megapixel
Resolution (H x V)
1920 x 1080 @ 30 fps
Video Output
HD-SDI (BNC) / CVBS (RCA)
DEFOG
OFF / Low / Middle / High
Lens Shading Compensation OFF / ON Lens Type
DC / Manual (C/CS)
Electronic Shutter
Auto 1/50 ~ 1/50,000 sec / Flk
Min. Illumination
0.02 Lux ( F1.2 , AGC ON)
ACCE (WDR)
OFF / Low / Middle / High
AGC
Low / High / OFF
BLC
BLC / HSBLC / OFF
White Balance
AWC-SET / MANUAL / INDOOR / OUTDOR / ATW
Camera Title
ON / OFF
Day & Night
Auto
SMART NR
ON / OFF
2DNR & 3DNR
ON / OFF
Sense-up
ON / OFF (Selectable range 2x~ 30x)
Picture-Effect
Mirror
OSD Control
Button
Power Source
12 VDC ± 10% / 1A
Power Consumption
2.52 W
Current
210 mA (max)
Operating Temperature
-10°C ~ 50°C (14°F ~ 122°F)
Storage Temperature
-20°C ~ 70°C (-4°F ~ 158°F)
Dimensions (W x H x D)
56 x 50 x 125.7
Please use suitable adapter DC12V ± 10 %,1A. Otherwise, this product will be damaged. 5
MAIN MENU SETUP 1. LENS
DC
2. EXPOSURE 3. WHITE BAL
ATW
4. DAY&NIGHT
AUTO
5. NR 6. SPECIAL 7. ADJUST 8. RESET 9. EXIT
1. LENS
LENS
DC
Default
VIDEO
N/A
MANUAL
Fixed or Varifocal lens can be installed on this camera. Manual – Iris is adjusted manually DC – Iris is adjusted automatically by the camera according to light conditions. Notice: we recommend using high quality megapixel lens in order to get the best result in term of picture. 2. EXPOSURE
EXPOSURE SHUTTER
1/60
AGC
LOW
SENS-UP
OFF
BRIGHTNESS
ɩ ɩ ɩ ɩ ɩ ɩ | ɩ ɩ ɩ ɩ ɩ 060
ACCE
OFF
DEFOG
OFF
BACKLIGHT
OFF
RETURN
RET
6
EXPOSURE SHUTTER
1/60, FLK, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/50000, x2, x4, x6, x8, x10, x15, x20, x25, x30, AUTO
AGC
MIDDLE, HIGH, LOW
SENS-UP
AUTO
SENS-UP
x2, x4, x6, x8, x10, x15, x20, x25, x30
RETURN
RET
OFF BRIGHTNESS
0~100
ACCE
OFF, LOW, MIDDLE, HIGH
DEFOG
OFF, LOW, MIDDLE, HIGH
BACKLIGHT
OFF BLC
GAIN
MIDDLE, HIGH, LOW
AREA
POSITION
SIZE,RET, AGAIN
DEFAULT
HBLC
RETURN
RET
SELECT
AREA1, AREA2, AREA3, AREA4
DISPLAY
ON, OFF
LEVEL
0~100
MODE
ALL, DAY, NIGHT
BLACK MASK
ON, OFF
DEFAULT RETURN RETURN
RET
RET
SHUTTER AES (auto electronic shutter) - the camera automatically sets the optimum shutter speed. FLK - flickerless mode, avoids interference from light sources (recommended for video-iris or DC-iris lenses only). FIXED - forces a fixed shutter speed. AGC Regulate the gain or amplification of the video signal, mainly used in low-light conditions with the iris fully open. Can be used only when DAY&NIGHT is not set to AUTO. SENSE-UP Allow user selectable digital show shutter speed in order to allow extra light into a camera thereby providing higher sensitivity in low light conditions. 7
ACCE (DWDR) Stand for Adaptive Contrast and Color Enhancement which is equivalent to Wide Dynamic Range technique. The contrast ratio of the image can be effectively expressed and the edge information can be improved in order to enhance the overall visibility of the image. DEFOG Improves the clarity of images taken in poor conditions such as fog, smoke, rain or snow. Applied to live or recorded color video, it provides real time results and displays visual details that would normally have been difficult to distinguish. 3. WHITE BALANCE WHITE BAL ATW AWCSET INDOOR OUTDOOR MANUAL
BLUE
0~100
RED
0~100
RETURN
RET
4. DAY & NIGHT DAY&NIGHT AUTO
DELAY
0~60
N-D(AGC)
0~100
N-D(AGC)
0~100
REURN COLOR B/W
BURST
ON, OFF
IR SMART
ON, OFF
IR LED
ON, OFF
IR PWM
0~100
RETURN
RET
EXT
8
5. NR NR 2DNR
OFF, ON
3DNR
ON
LEVEL
0~100
SMART NR
ON, OFF
RETURN
RET
S-LEVEL
0~100
E-LEVEL
0~100
RETURN
RET
SMART NR. Avoid over exposure problem when the camera is focus on area with wall. 6. SPECIAL SPECIAL CAM TITLE
OFF ON
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ<> CLR
D-EFFECT
POS END
FREEZE
OFF, ON
MIRROR
OFF, MIRROR, V-FLIP, ROTATE
D-ZOOM
OFF ON
PIP
OFF, ON
D-ZOOM
x2.0~62.0
PAN&TILT
D-ZOOM
DEFAULT RETURN NEG. IMAGE
OFF, ON
RETURN MOTION
OFF ON
SELECT
AREA1, AREA2, AREA3
DISPLAY
OFF ON
SENSITIVITY
0~100
MOTION VIEW
OFF, ON
DEFAULT
PRIVACY
RETURN
RET
SELECT
ARE1~ARE8
OFF ON
9
POSITION
DISPLAY
ON / POSITION
COLOR
1~16
DEFAULT RETURN LANGUAGE
ENG
DEFECT
LIVE DPC
ON, OFF
LEVEL
0~60
STATIC DPC
ON, OFF
RET
START
RS485
LEVEL
0~60
SENS-UP
x2, x4, x6, x8, x10, x15, x20
RETURN
RET
CAM ID
0~255
ID DISPLAY
OFF ON
CAM001~CAM255
BAUDRATE
9600, 19200, 38400, 2400, 4800
RETURN
RET, END
VERSION
110727
RETURN
RET
6. ADJUST ADJUST SHARPNESS
MONITOR
SHARPNESS
ON, 0FF
LEVEL
0~100(50)
RESOLUTION
ON, OFF
RETURN
RET
LCD
GAMMA
USER, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95, 1.00
CRT
BLUE GAIN
0~100
RED GAIN
0~100
RETURN
RET
BLACK LEVEL
0~30
BLUE GAIN
0~100
RED GAIN
0~100
RETURN OSD
TEXT COLOR
1~8
OUTLINE
OFF, ON 10
RETURN LSC
ON, OFF
NTSC/PAL
NTSC, PAL
RETURN
RET, END
RESET
FACTORY
RET
RETURN EXIT
7. RESET RESET FACTORY RETURN
I/O panel and dimensions: Rear:
①1
①3
①5 ①4
①2
1. SDI output 2. CVBS output 3. 12 VDC jack 4. OSD button 5. Power status
11
Dimensions
Via Don Arrigoni, 5 24020 Rovetta S.Lorenzo (Bergamo) http://www.comelitgroup.com e-mail:
[email protected]
12