HD Encoder & Modulator Operation Manual_v1.3

HEM-100

Class A Device The device is registered for EMC (Electromagnetic Compatibility) as an industrial product.

Contents ............................................................................................. 4 Caution ........................................................................................... 6 Features Controls, Indicators and Connections .................................................... 7

.......................................................... 10 Menu Structure & Adjustment Menu Contents

.................................................................................. 13

........................................................................ 26 Product Specifications

FCC (Federal Communications Commission)

This equipment has been tested and found to comply with the limits for class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interface when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential to correct the interference at his own expense CAUTION: Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.

Disposal of Old Electrical & Electronic Equipment

(Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packing indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequence for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources.

Caution Always use set voltage. (AC 220V) ◦ All operating instructions must be read and understood before the product is operated. ◦ These safety and operating instructions must be kept in safe place for future reference. ◦ Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can result in accidents.

Multi LCD Monitor 4 4 HDFormat Encoder & Modulator

◦ This product must be operated on a power source specified on the specification label. If you are not sure of the type of power supply used in your location, consult your dealer or local power company.

◦ The power cords must be routed properly to prevent stepping on them or objects from resting on them. Check the cords at the plugs and product.

◦ Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock. ◦ Never insert an object into the product through vents or openings. High voltage flows in the product and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not spill water or liquid on the product.

◦ Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous conditions. Utilize a qualified electronics service specialist for all repairs.

◦ If any of the following conditions occurs, unplug the power cord from the AC outlet and request a qualified service person to perform repairs. a. When the power cord or plug in damaged. b. When a liquid was spilled on the product or when objects have fallen into the product. c. When the product has been exposed to rain or water. d. When the product does not operate properly as described in the operating instructions. Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician. e. When the product has been dropped or damaged. f . When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the pr oduct needs servicing.

◦ The mains plug and mains coupler as a disconnection device, shall remain readily accessible by the user. ◦ Use the this unit shall be connected to a mains socket outlet with a protective earthing connection. ◦ Make sure it has more than 10 cm clearance all around the unit. ◦ Keep the product away from direct rays of the Sun-light.

Caution ◦ In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.

◦ Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition.

◦ When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer.

the product. Do not use liquid cleaners or aerosol cleaners.

◦ Unplug the power cord from the AC outlet if you do not use the product for considerably long time. ◦ Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement.

◦ Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instruction. Use only the mounting hardware recommended by the manufacturer.

◦ When relocating the product placed on a cart, it must be moved with the utmost care. Sudden stops, excessive force and uneven floor surface can cause the product to fall from the cart.

◦ The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.

◦ In case of rack mount, the inside of the product can be harmed by the heat from other devices and decrease of air circulation. To prevent this, have enough space around the product and keep designated operation temperature range by installing a cooling fan or using other effective methodes. [Refer to the ‘Specifications”]

◦ Keep the product away from heat sources such as radiators, heaters, stoves and other heat generating products (including amplifiers).

◦ If you use this product connecting to HDTV that does not support 1:1 picture mode, some border part of the picture could not be realized on HDTV screen. (If the picture on screen is not right with HDTV that supports 1:1 picture mode, please change it into 1:1 picture mode. Some HDVT might not support 1:1 picture mode or original size mode.)

HD Encoder & Modulator 5

◦ Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean

Features HEM-100 HD Encoder contains the following features : ◦ Compatible with various SDI signals - The product is compatible with various SDI signals - 408i, 576i, 1080i, 1080p, 1080psf.

◦ Compatible with various analog signals - The product is compatible with varied analog signals – Composite, S-Video, Component, RGB, etc.

◦ DVI Digital/ Analog input support Multi LCD Monitor 6 6 HDFormat Encoder & Modulator

- DVI Digital and DVI Analog(VGA) inputs are available without any other accessory.

◦ VGA input supports - VGA inputs are available without any other accessories.

◦ All-in-one type system - Slim and all-in-one type product that requires no other accessories and optimized for space utilization.

◦ HD Broadcast Production HD - By using the product, the HD broadcast can be made through the digital TV without any additional set-top box.

◦ Virtual Channel Function - Supports the Virtual Channel Function” (ATSC). The number and the name of the virtual channel can be designated by user.

◦ RTSP Network Stream Service Function - The product can make HD broadcast through the RTSP Network.

◦ Audio Input - The product suppports external audio input by using a RCA jack.

◦ Touch Button Control - The product is easy to control by using front Touch Button.

◦ Audio delay Function ◦ Power - This product is powered by a normal AC source.

◦ Additional features - Loop-Though(SDI), Rack Mountable Design

 

Controls, Indicators and Connections HEM-100 : FRONT

[UNLOCK] Lamp

[COMM] Lamp

[ENTER] Lamp

[STATUS] Lamp

[DOWN] Lamp

[TEXT LCD]

[UP] Lamp [MENU] Lamp

[AC IN] [POWER] Switch Lamp [POWER] [COMM] Lamp [SDI-IN] Lamp [SDI [STATUS] Loop-Through] [TEXT LCD] [HDMI-IN] [VGA]

[DVI-IN] HEM-100 : REAR

[RF-OUT] Terminal [UNLOCK] Lamp [USB] Terminal [ENTER] Lamp [ETHERNET] Terminal [DOWN] Lamp Terminal [COMM/PGM] [UP] Lamp [AUDIO 1]/[AUDIO 2] [MENU] S-VHS Lamp COMPONENT

[CVBS]

[AC IN] [POWER] Switch [SDI-IN] [SDI Loop-Through] [HDMI-IN] [VGA] [DVI-IN] [CVBS]

[RF-OUT] Terminal [USB] Terminal [ETHERNET] Terminal [COMM/PGM] Terminal [AUDIO 1]/[AUDIO 2] S-VHS COMPONENT

HD Encoder & Modulator 7

[POWER] Lamp

Controls, Indicators and Connections FRONT ◦ [POWER] Lamp - Indicates the status of the Power. LED becomes Green when the status is normal.

◦ [COMM] Lamp - In case of upgrade and data communication, LED flickers to Green.

◦ [STATUS] Lamp Multi LCD Monitor 8 8 HDFormat Encoder & Modulator

- LED is OFF for normal operation. If LED flickers to Green HEM-100 is not working properly.

◦ [MENU] Button - Used to activate the menu. - In the KEY LOCK mode pressing the MENU button for 5 seconds will activate the MENU (KEY UNLOCK mode) - In the KEY UNLOCK mode, the MENU will be deactivated(Key Lock mode) if there is no input for more than 50 seconds.

◦ [UP] Button - In the main MENU, pressing [UP] button will move cursor to move upwards. - In the value setting mode, the value will increase.

◦ [DOWN] Button - In the main MENU, pressing [UP] button will move cursor to move downwards. - In the value setting mode, the value will decrease.

◦ [ENTER] Button - Used to confirm a chosen mode. When the chosen menu is activated, “#” mark in the left side of menu will be changed to “*” mark. - When the menu setting mode is activated, the changed feature will be applied by pressing the button. - After applying the feature, “*” mark will be changed to “#” mark and then the menu setting mode will be inactivated.

◦ [KEY UNLOCK] Lamp - HEM-100 provides KEY LOCK function to prevent abnormal input. - In the standby status, the product is always in KEY LOCK condition and pressing any button will not work before the menu activation by pressing the [MENU] button for 5 seconds. - LED becomes Green when the menu is activated as the status becomes KEY UNLOCK. - KEY UNLOCK condition maintains about 50 seconds and becomes KEY LOCK condition automatically. Warning!! Make sure the product is grounded before connecting the input signal cables. The unit may not operate properly if the input line is connected before the it is grounded.

Controls, Indicators and Connections REAR ◦ RF-OUT - The terminal is used to emit HD broadcast stream by using RF cable. - Select [ATSC MODULATOR] in the Main menu [M12 : TS OUTPUT].

◦ E-NET (RJ-45)

◦ USB (HOST) - The terminal is for USB HOST. - The terminal is for upgrade.

◦ COMM/PGM - The terminal is for CONSOLE and upgrade.

◦ AUDIO 1 (RCA jack) - Signal input terminal for external Audio Stereo signal. Also, the terminal is for AUDIO MONO input.

◦ AUDIO 2 (RCA jack) - Signal input terminal for external Audio Stereo signal terminal.

◦ S-VHS - Signal input terminal for S-Video signal.

◦ COMPONENT B R G - Signal input terminal for COMPONENT Video signal.

◦ CVBS - Signal input terminal for Composite Video signal.

◦ DVI DIGITAL/DVI ANALOG (DVI-I) - Signal input terminal for DVI DIGITAL/DVI ANALOG signal.

◦ VGA - Signal Input terminal for VGA signal

◦ HDMI - Signal input terminal for HDMI signal.

◦ SDI - Signal input terminal for HD/SD SDI signal. The other terminal in the right is for SDI Through-out.

◦ AC IN (~250V T3.15AL) - AC power input terminal for AC ~250V.

HD Encoder & Modulator 9

- The network terminal provides connection to Ethernet cable. - Select [NETWORK RTSP] in the Main menu [M12 : TS OUTPUT] to use stream server.

Menu Structure & Adjustment [1] Menu ◦ This product provides user control through menu on LCD screen. - Below is the MENU List. No.

Multi LCD Monitor 10 HDFormat Encoder & Modulator 10

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Menu M01: ATSC MODE #CHANN: KOR TERR M02: ATSC CHANNEL #TERR : 004/069Mh M03: ATSC POWER -020dBmV M04: VIRTUAL CH #MJ:004 #MN:001 M05: VCT CH NAME #TLBC M06: VIDEO INPUT #SDI M07: AUDIO INPUT #EMBEDDED CH1/2 M08:ALG AUD VOL #005 M09: AUDIO CODEC #AC3 M10: AUDIO DEL #+0000ms M11: VID BITRATE #18000kbps M11: VID BITRATE #18000kbps M13: LOGO DISPLAY #ON M14: LOGO SIZE #LARGE

Item CHANN: KOR TERR CHANN: KOR CABL TERR : 002/057Mh ~ 069/803Mh CABL : 002/057Mh ~ 126/837Mh -020dBnV ~ -035dBmV Major number 0~999 Minor number 0~999 Supports Max. 6 letter of Alphabet Capital and Small letter, Number and Special Character. SDI, HDMI, DVI, VGA, COMPONENT, S-VIDEO, CVBS EMBEDDED CH1/2, CH3/4, CH5/6, CH7/8, ANALOG STER IN1 ~2, ANALOG MONO IN1~2 1~20, MUTE AC3, MPEG2 -0900ms~ 1000ms 1000kbps ~ 18000kbps ATSC MODULATOR, NETWORK RTSP ON, OFF SMALL, MIDDLE, LARGE

Menu Structure & Adjustment [1] Menu

15 16 17 18 19 20 21 22 23

Menu M15: LOGO BLEND #STEP 2 M16: LOGO PLACE #LEFT TOP M17: IP ADDRESS #192.168.1.80 M18: SUBNET MASK #255.255.255.0 M19: DEFAULT GATEWAY #192.168.1.1 M20: AUTO ADTMT #EXECUTE NOW M21: SYSTEM RESET #SOFT RESET M22: SET DEFAULT #EXECUTE NOW M23: VERSION INFO #BASE FW: 2.9

Item NONE, STEP1 ~3 LEFT TOP, RIGHT TOP, LEFT BOTTOM, RIGHT BOTTOM, CENTER SYSTEM NETWORK IP ADDRESS SYSTEM NETWORK SUBNET MASK SYSTEM NETWORK DEFAULT GATEWAY Automatic Adjustment for Analog Video Input Screen Restart the System. Reset to factory default. Version Informaition.

HD Encoder & Modulator 11

No.

Menu Structure & Adjustment [2] Control Menu ◦ Varous functions can be selected by using MENU, UP, DOWN and ENTER buttons in the front panel of the HEM-100.

Multi LCD Monitor 12 HDFormat Encoder & Modulator 12

[3] Menu Contorl Sequence ◦ Menu control sequence follows the order below. 1. Pressing MENU Button for 5 seconds will activate KEY UNLOCK mode and LED lamp will change to green. 2. Pressing MENU button once will display menu on the LCD screen. And pressing MENU button once more will make the product become standby mode. 3. Once the MENU apprears one can select the sub-menu by using UP/DOWN buttons. 4. After selecting a sub-menu, press ENTER Button to change the setting. When the chosen menu is activated, “#” mark will be changed to “*” mark. 5. Pressing ENTER Button to select any sub-menu with UP/DOWN buttons. 6. Pressing ENTER Button will save the new value and “#” mark will be changed to “*” mark. 7. If any button is pressed for about 50 seconds, the product will become KEY LOCK mode automatically and then the KEY UNLOCK LED will be turned off.

Menu Contents [1] ATSC MODE Below is the description for ATSC MODE menu.

◦ CHANN : KOR TERR - Frequency selection mode of ATSC Modulator is set for Korean Terrestrial broadcast TV Channels.

◦ CHANN : KOR CABL

- Frequency selection mode of ATSC Modulator is set for Korean Cable TV Channels.

[2] ATSC CHANNEL Below is description for ATSC CHANNEL MODE menu.

M02:ATSC CHANNEL #TERR : 002/057Mh ◦ CHANNEL Type - If ATSC MODE is set to [CHANN: KOR TERR], “TERR” is displayed on the screen. - If ATSC MODE is set to [CHANN: KOR CABL], “CABL” is displayed on the screen.

◦ CHANNEL Selection - For Terrestrial TV (TERR), the CHANNEL Selection is available from Channel 2 [002/057Mhz] to Channel 69 [069/803Mhz]. - For Cable TV (CABL), the CHANNEL Selection is available from Channel 2 [002/127Mhz] to Channel 126 [126/837Mhz].

[3] ATSC POWER ◦ Below is the description for ATSC POWER menu.

M03:ATSC POWER #33.6dBmV - Used to adjust the RF Power Output of ATSC Modulator from Min. level from OFF to 33.6dBmV. - Max level is 33.6dBmV.

HD Encoder & Modulator 13

M01:ATSC MODE #CHANN: KOR TERR

Menu Contents [4] VIRTUAL CHANNEL Below is the description for VIRTUAL CHANNEL menu.

Multi LCD Monitor 14 HDFormat Encoder & Modulator 14

M04:VIRTUAL CH #MJ:004 #MN:001 ◦ VIRTUAL CHANNEL - VIRTUAL CHANNEL function is provided in accordance to ATSC standard. - MJ stands for Major number of VIRTUAL CHANNEL and its value can be set from 1 to 999. - MN means the Minor number of VIRTUAL CHANNEL and its value can be set from 1 to 999. - Pressing [ENTER] Button once will change “#” mark to “*” mark. Channel can be selected from 1 and 999 by using [UP/DOWN] Buttons. Press [Enter] Button after selecting the channel value for the Major number. “#” mark will be changed to “*” mark and press [ENTER] Button to save the Minor number after selecting the value with UP/DOWN buttons between 1 and 999. “#” mark will be changed to “*” mark. - When the setting is completed, “CONFIG SUCCESS PLEASE RESTART” message will be displayed on the LCD screen. - The selected value has been saved but will be affective after restartng the system. - Select [SYSTEM RESET] in the Menu 21 to restart the system. - You may also use the [POWER] switch on the Rear panel to restart the system.

[5] VCT CH NAME Below is description for VCT CH NAME menu

M05:VCT CH NAME #TLBC ◦ VCT CH NAME - VCT CH NAME is used for naming the Virtual Channel (VCT). - The name of the Virtual Channel can have 6 characters or less. - Supports Max. 6 letter of Alphabet Capitals and Small letter, Numbers and Special Characters. - Press [ENTER] Button and select the first letter with the [UP/DOWN] Button. Press [Enter] Button after set the first letter and then the second letter can be set. Set the other letters in the same way. - When the setting is completed, “CONFIG SUCCESS PLEASE RESTART” is indicated on the screen. - The selected value has been saved but will be affective after restartng the system.

Menu Contents [6] VIDEO INPUT Below is the description for VIDEO INPUT menu.

◦ SDI - Used to set Video Input Signal as SDI Input. (SD/ HD) - When the Video Input Signal is changed to SDI, [AUDIO INPUT] is automatically changed to SDI EMBEDDED.

◦ HDMI - Used to set Video Input Signal as HDMI Input. - When the Video Input Signal is changed to HDMI, [AUDIO INPUT] is automatically changed to HDMI EMBEDDED.

◦ DVI - Used to set Video Input Signal as DVI Input. - When the Video Input Signal is changed to DVI, select the external Audio Input in the [AUDIO INPUT] menu since DVI carries only video signals.

◦ VGA - Used to set Video Input Signal as VGA Input. - When the Video Input Signal is changed to VGA, select the external Audio Input in the [AUDIO INPUT] menu because VGA carries only video signals.

◦ COMPONENT - Used to set Video Input Signal as COMPONENT Input. - When the Video Input Signal is changed to COMPONENT, select the external Audio Input in the [AUDIO INPUT] menu because COMPONENT carries only video signals.

◦ S-VIDEO - Used to set Video Input Signal as S-VIDEO Input. - When the Video Input Signal is changed to S-VIDEO, select the external Audio Input in the [AUDIO INPUT] menu because S-VIDEO carries only video signals.

◦ CVBS - Used to set Video Input Signal as CVBS (COMPOSITE) Input. - When the Video Input Signal is changed to CVBS, select the external Audio Input in the [AUDIO INPUT] menu because CVBS carries only video signals.

HD Encoder & Modulator 15

M06:VIDEO INPUT #SDI

Menu Contents [7] AUDIO INPUT Below is the description for AUDIO INPUT menu.

Multi LCD Monitor 16 HDFormat Encoder & Modulator 16

M07:AUDIO INPUT #EMBEDDED CH 1/2 ◦ EMBEDDED CH 1/2 - Used to set Audio Input Signal as EMBEDDED Audio Channel 1 and 2 when the Video Input Signals are SDI or HDMI.

◦ EMBEDDED CH 3/4 - Used to set Audio Input Signal as EMBEDDED Audio Channel 3 and 4 when the Video Input Signals are SDI or HDMI.

◦ EMBEDDED CH 5/6 - Used to set Audio Input Signal as EMBEDDED Audio Channel 5 and 6 when the Video Input Signals are SDI or HDMI.

◦ EMBEDDED CH 7/8 - Used to set Audio Input Signal as EMBEDDED Audio Channel 7 and 8 when the Video Input Signals are SDI or HDMI.

◦ ANALOG STER IN 1 - Used to set AUDIO 1 RCA terminal as Audio Input Signal input terminal. - External Audio Input should be used if the EMBEDDED Audio Signal is not included.

◦ ANALOG STER IN 2 - Used to set AUDIO 2 RCA terminal as Audio Input Signal input terminal. - External Audio Input should be used if the EMBEDDED Audio Signal is not included.

◦ ANALOG MONO IN 1 - Used to set the Audio Signal Input to use mono not stereo by using only the White Terminal(Left) of AUDIO 1 RCA terminals in the Rear. - External Audio Input should be used if the EMBEDDED Audio Signal is not included.

◦ ANALOG MONO IN 2 - Used to set the Audio Signal Input to use mono not stereo by using only the Red Terminal(Right) of AUDIO 1 RCA terminals in the Rear. - External Audio Input should be used if the EMBEDDED Audio Signal is not included.

Menu Contents [8] ANALOG AUDIO VOLUME Below is the description for ANALOG AUDIO VOLUME menu.

◦ ANALOG AUDIO VOLUME - The function that adjusts analog audio volume. - It is able to be adjusted between 1 and 20 or mute. - MUTE is the function that turns off sound.

[9] AUDIO CODEC Below is the description for AUDIO CODEC menu.

M09:AUDIO CODEC #AC3 ◦ AC3 - Set audio codex as Dolby AC3.

◦ MPEG2 - Set audio codex as MPEG1 Layer2. - Some TV could not have audio output with MPEG2 audio setup.

HD Encoder & Modulator 17

M08:ALG AUD VOL #005

Menu Contents [10] AUDIO DELAY Below is the description for AUDIO DELAY menu.

Multi LCD Monitor 18 HDFormat Encoder & Modulator 18

M10:AUDIO DELAY #+0000ms ◦ AUDIO DELAY - Used to adjust the audio timing when Audio Signal does not match the Video Signal. - The Audio Signal can be advanced to Maximum . -0900m which means 900 milliseconds (0.9 second). - The Audio Signal can be delayed to Max. +1000ms which means 1000 milliseconds (1 second). - Adjustment can be made by 100 milliseconds step. - When the setting is completed, “CONFIG SUCCESS PLEASE RESTART” is indicated on the screen. - The selected value has been saved but it will be affective after restarting the system.

[11] VID BITRATE Below is the description for VID BITRATE menu.

M11:VID BITRATE #18000kbps ◦ VID BITRATE - The function that adjusts bitrate of video signal. - It is able to be adjusted between 1000kbps and 18000kbps. 18000kbps shows the best definition.

Menu Contents [12] TS OUTPUT Below is the description for TS OUTPUT menu.

◦ ATSC MODULATOR - Used to set the Output Signal ATSC modulator which outputs ATSC standard signal through RF Modulator. - Connect the cable from RF-OUT in the Rear of the HEM-100 to RF-Input connector of the Digtial TV to monitor HD broadcast.

◦ NETWORK RTSP - Used to set the Output Signal to Network RTSP. - Connect Ethernet to E-NET connector in the rear and access to IP Address of the product by using the RTSP software to watch video stream through the Network. - When the setting is completed, “CONFIG SUCCESS PLEASE RESTART” is indicated on the screen. - The selected value has been saved but will be affective after restartng the system.

[13] LOGO DISPLAY Below is the description for LOGO DISPLAY menu.

M13:LOGO DISPLAY #ON ◦ LOGO DISPLAY - The function that indicates virtual channel name set in M05 VCH CH NAME on transmitting picture. - Select ON, the name shows on the picture. - Select OFF, the name does not show on the picture.

HD Encoder & Modulator 19

M09:TS OUTPUT #ATSC MODULATOR

Menu Contents [14] LOGO SIZE Below is the description for LOGO SIZE menu.

Multi LCD Monitor 20 HDFormat Encoder & Modulator 20

M14:LOGO SIZE #LARGE ◦ LOGO SIZE - The function that sets font size when M12 LOGO DISPLAY is ON. - You can select one of SMALL, MIDDLE, LARGE.

[15] LOGO BLEND Below is the description for LOGO BLEND menu.

M13:LOGO BLEND #STEP 2 ◦ LOGO BLEND - The function that sets font transparency when the M13 LOGO DISPLAY is ON. - STEP1~3 indicate font transparency. STEP3 is the most transparent setup. - When it is NONE, the font is set as opaque.

Menu Contents [16] LOGO PLACE Below is the description for LOGO PLACE menu.

◦ LOGO PLACE

- The function that sets logo position when the M13 LOGO DISPLAY. - LEFT TOP is the function that sets the logo on left top of the screen. - RIGHT TOP is the function that sets the logo on right top of the screen. - LEFT BOTTOM is the function that set the logo on left bottom of the screen. - RIGHT BOTTOM is the function that sets the logo on right b bottom of the screen. - CENTER is the function that sets the logo on center of the screen.

[17] IP ADDRESS Below is the description for IP ADDRESS menu

M17:IP ADDRESS #192.168.001.080 ◦ IP ADDRESS - Used to set Network IP Address. - Press [ENTER] Button and set the first digit of IP Address with the [UP/DOWN] Buttons. Press [Enter] Button after set the first part of IP Address and then the second part of IP Address can be set. Set the 3rd and 4th of the I.P Address in the same way. The IP Address can be set as xxx.xxx.xxx.xxx. As a result [ENTER] Button is used 4 times to change the IP Address. - When the setting is completed, “CONFIG SUCCESS PLEASE RESTART” is indicated on the screen. - The selected value has been saved but will be affective after restartng the system

HD Encoder & Modulator 21

M16:LOGO PLACE #RIGHT TOP

Menu Contents [18] SUBNET MASK Below is the description for SUBNET MASK menu.

Multi LCD Monitor 22 HDFormat Encoder & Modulator 22

M18:SUBNET MASK #255.255.255.000 ◦ SUBNET MASK - Used to set Network Subnet Mask of the product. - Press [ENTER] Button and set the first digit of Subnet Mask address with the [UP/DOWN] Button. Press [Enter] Button after set the 1st part of Subnet Mask address(3 digits) and then set the second part of the Subnet Mask address in the same manner. Set the 2nd, 3rd and 4th part in the same way. The Subnet Mask can be set as xxx.xxx.xxx.xxx. As a result [ENTER] Button is used 4 times to change the IP Address. - When the setting is completed, “CONFIG SUCCESS PLEASE RESTART” is indicated on the screen. - The selected value has been saved and it will be applied after restart.

[19] DEFAULT GATEWAY Below is the for DEFAULT GATEWAY menu.

M19:DEFT GATEWAY #192.168.001.001 ◦ DEFAULT GATEWAY - Used to set Network Default Gateway of the product. - Press [ENTER] Button and set the first digit of Default Gateway address with the [UP/DOWN] Buttons. Press [Enter] Button after set the first part of Gateway address and then go on to 2nd part. Set the 3rd and 4th of the I.P Address in the same way. The IP Address can be set as xxx.xxx.xxx.xxx. As a result [ENTER] Button is used 4 times to change the IP Address. - When the setting is completed, “CONFIG SUCCESS PLEASE RESTART” is indicated on the screen. - The selected value has been saved and it will be applied after restart.

Menu Contents [20] AUTO ADJUSTMENT Below is the description for AUTO ADJUSTMENT menu.

◦ Automatic Screen Alignment - Used to adjust the size, position and focus of the raster image on the screen for Analog VGA input.

[21] SYSTEM RESET Belows are descriptions for function of the SYSTEM RESET menu.

M21:SYSTEM RESET #SOFT RESET ◦ SYSTEM RESET

- Used to restart the system. - Use this function if the system should be restarted after Menu setting. - This function does not the shut the power down of the system, but restarts the software.

HD Encoder & Modulator 23

M20:AUTO ADTMT #EXECUTE NOW

Menu Contents [22] SET DEFAULT Below is the description for SET DEFAULT menu.

Multi LCD Monitor 24 HDFormat Encoder & Modulator 24

M22:SET DEFAULT #EXECUTE NOW ◦ Menu initialization - Used to initialize the Menu setting. - Please be careful because the Menu Setting will be initialized and the values before the initialization won’t be saved. - Use this function to initialize the Menu to Factory Default setting.

[23] VERSION INFO Belows are descriptions for function of the VERSION INFO menu.

M23:VERSION INFO #BASE FW : V2.9 ◦ VERSION INFO - The function that checks system version. - You can check system’s Software / Hardware version.

Menu Contents [24] STANDBY SCREEN Below is the description for STANDBY LCD SCREEN menu.

◦ STANDBY SCREEN - Used to show the current information about VIDEO INPUT, AUDIO INPUT and OUTPUT in the KEY LOCK mode. - [VIDEO INPUT]/[AUDIO INPUT]/[TS OUTPUT] are displayed on the LCD. - In case of AUDIO INPUT, the abbreviations are used as follows. Abbreviation

Meani ng

E1-2

EMBEDDED CH 1/2

E3-4

EMBEDDED CH 3/4

E5-6

EMBEDDED CH 5/6

E7-8

EMBEDDED CH 7/8

AS 1

ANALOG STEREO IN 1

AS 2

ANALOG STEREO IN 2

AM 1

ANALOG STEREO IN 1

AM 2

ANALOG STEREO IN 2

- OUTPUT information shows the information about the Video Output. - In case of TCH002, T stands for the Frequency Channel of the Terrestrial TV and CH002 means the Output through the Channel 2. If the Output is not RF or RTSP are displayed. - If the [SDI/E1-2/TCH002] is displayed, this means Video Input is SDI, Audio Input is Embedded Channel ½ and the signal is out through the RF Terrestrial TV Channel 2.

HD Encoder & Modulator 25

**** HEM100 **** SDI /E1-2/TCH002

Product Specifications HEM-100

Multi LCD Monitor 26 HDFormat Encoder & Modulator 26

Input

Input Signal

Analog Input Spec

2 x BNC

SDI Input (Active Through Out)

1 x HDMI

HDMI Input

1 x DVI-I

DVI Input

1 x VGA

VGA Input

3 x RCA

Component Input

1 x RCA

Composite Input

1 x S-Video

S-Video Input

Analog

Composite / S-Video / Component

HD-SDI

1.485Gbps

SD-SDI

270Mbps

DVI/VGA

640×480 / 800×600 / 1024×768 / 1280×768 / 1280x1024 / 1920x1080

Composite

1.0Vpp (with Sync)

S-Video

1.0Vpp (Y with Sync), 0.286Vpp(C)

Component

1.0Vpp (Y with Sync), 0.7Vpp (Pb,Pr)

SMPTE-274M SDI Input Signal Formats

Audio In

RF Output

Modulator

Video Encoding

Audio Encoding

1080i (60/59.94/50) 1080p (30/29.97/25/24/24sF/23.98/23.98sF)

SMPTE-296M

720p (60/59.94/50)

SMPTE-260M

1035i (60/59.94)

SMPTE-125M

480i (59.94)

ITU-R BT.656

576i (50)

SDI

Embedded Audio

HDMI

Embedded Audio

Analog

Stereo 2ch / Stereo 1ch + Mono 2ch (RCA)

Interface

75ohm F-type Connecter

Freq Range

54 ~ 861MHz

Output Level

45 ~ 58dBmV

Phase Noise

- 90 dBc/Hz @ 10KHz

Standard

ATSC 8-VSB

Bit Rate

MAX 19.392MBps

Ch Bandwidth

6MHz

Standard

ISO/IEC 13818-2 (MPEG2 MP@HL)

ES Rate

6,000 ~ 25,000 KBps

Rate Control

CBR

Standard

Dolby-Digital Stereo AC-3

Bit Rate

384KBps

Power

100 - 240V AC 50/60Hz

Power Consumption (Approx.)

50 Watts

Operating Temperature

0 °C ~ 60 °C

Storage Temperature

-40 °C ~ 85 °C

Main Body Dimensions (mm)

430(W) x 290(D) x 44(H)

Weight

3.8Kg

Accessory

AC Power cord

* Above specifications may be changed without notice.

FOR MORE INFORMATION PLEASE VISIT : http://www.tvlogic.tv

부사장 12F ACE HIGH-END TOWER 8, 345-4, Gasan-dong, Geumcheon-gu, Seoul, 153-802, KOREA 153-802Email 서울특별시 금천구 가산동 345-4 Tel조 : +82-70-8668-6611, Fax : 82-2-6123-3202, : [email protected] 성 일 에이스하이엔드 8차 12층

Mobile. 010-2520-6837

전화. 070-8668-6611(대표)