HD-1

Professional  HDMI Extender Continuing upon our remarkable “OmniBalun” product’s design philosophy, our newest creation, the “OmniHDMI Extender” incorporates every current HDMI Feature, including 1.4a-exclusives like 3-D, 10/100T Ethernet Channel (HEC), Audio Return Channel (ARC), and 4K x 2K Support. This is the first HDMI Extender to offer all HDMI 1.4a Features. In addition, we are proud to offer features not available elsewhere, including built-in 3-way Ethernet Switch, Fully Active (9pin) RS-232 Control, multiple IR brand compatibility, TOSLINK™ Audio Output, and One Power Supply for ease of installation. Designing the HD-1 began with applicationdriven requirements from our own Installation Team, followed by our Engineering Department’s development and testing. Our manufacturing facility is monitored by our personnel to insure the highest level of performance, quality, and reliability. The result is products that you can be proud to sell, install and show to your clients. When was the last time an “accessory” became a source of pride for you and your clients? That time is now, and Transformative Engineering is proud to bring it to you. HD-1 Product Highlights: • Only One Single UTP (CAT5e/CAT6) Cable necessary. • Powered via one (supplied) 24V Power Supply. • Audio Return Channel (ARC) backwards compatibility via TOSLINK ™ Digital Audio Output. • Full Function (9-pin active) RS-232 Control Extension • Diagnostic Indicator Lights for monitoring performance and operation • Highest Quality Extruded Aluminum case for cooling, shielding, and safety.

• IR Bi-Directional Pass-Thru with Power Option. We give you the choice of pure-pass IR or Powered Pickup System at either end. Compatible with industry-standard products. Optional adapters available for non-standard configurations. • Built-In 3-Port Ethernet Switch at each end. • Solid Performance at 100 Meters (330 Feet) at 1080p with all functions. • Fully Automatic Cable length compensation. No Dials or Switches needed. • Three (3) Year Warranty

®

HD-1

Professional HDMI Extender

1. Aluminum mounting brackets 2. Rugged Shielded aluminum enclosure brushed anodized surface

The Complete HDMI Extender Solution

1

2

3

HDMI Out ARC

Ethernet 10/100 BaseT

SPDIF In

Power In

HDBaseT

+24VDC Only

SPDIF ARC

HD-1

HDMI Extender

Receiver

with Full Feature Set

Ethernet

Link HDCP

Full Duplex

RS232

3. Rubber surrounds for shortprotection and safety.

IRDA In

Power

Speed

HDBaseT

Link

Out

1

2

3

4. Ethernet feedback LEDs 5. HDCP feedback LED 6. Link feedback LED 7. IRDA Input and Output 8. RS232 connector

9. Three Ethernet jacks 10. HDMI In (or Out) 11. TOSLINK™ connector 12. ARC/SPDIF Switch 14. +24VDC power input 15. HDBaseT RJ45 connector HD-1 Specifications Input Signal: HDMI Version 1.0 thru 1.4a Ethernet (10/100T) X 3 IR Signal – Pass Thru (Xantech Compatible) IR Powered Pickup – Ring (Ground), Tip (Signal), Sleeve (+12VDC) RS232 – 9-Pin Fully Active TOSLINK (For Audio Return) Video Formats Supported: 480i/576i/480p/576p/720p/1080i/ 1080p/1080p@48bit

Audio Formats Supported: All HDMI Supported Formats, including DTS-HD,Dolby-HD, DVD-A, Dolby True-HD, 8-CH LPCM

Maximum Distance (with CAT6) 100 Meters (330 Feet), @ 1080p, Greater distances at lesser resolutions

Output Signal: HDMI Version 1.0 thru 1.4a Ethernet (10/100T) X 3 IR Signal – Pass Thru (Xantech Compatible) RS232 – 9-Pin Fully Active TOSLINK (Digital Audio Out)

Power Supply (included): 24VDC, 1A

Member of HDBase-T Alliance Authorized HDMI Adopter

©2011Transformative Engineering, Inc.

Dimensions (Each) 9” W x 1.1” H x 3.75” D (with connector) Weight: 1.25 Lbs (Each)

781-769-6410 Norwood, MA 02062 USA

www.transformativeengineering.com

HDS-14 Conditioning Splitter

If this doesn’t look like any 4-Way HDMI Splitter you’ve ever seen, it’s because it’s not! Our 4-Way HDMI Conditioning Splitter is designed to Stabilize and correct HDMI signals that may have been compromised by non-conforming HDMI devices. Many HDMI products may not present a signal with correct EDID, “handshake”, or HDCP protocols. As a result, you may experience intermittent or unsatisfactory display. We recognize that and solve most of these issues by establishing a proper “handshake” at the input to this device (with your source) so that your display will operate reliably. This “splitter” supports ARC (Audio Return Path) and HEC (Home Ethernet Connection) through Output #1. All outputs support 3D, 2K x 4K, Deep Color, xV Color, and High Speed transmissions, as well as all current HDMI Audio Formats. It is powered by an included 5V Power Supply. In addition, we provide a USB port for future firmware updates. Another feature unique to our 4-Way Conditioning Splitter is our EDID Management System. We allow you to control which EDID is reflected to all Displays. You choose whether the highest-resolution display is duplicated to the other three, or whether Display #1 is copied over, or whether you mix the Audio and Video resolutions for most reliable operation. In addition, we provide you with diagnostic indicators to show which displays are operating and how you’ve assigned the EDID function. We also provide an IR Distribution so that you may control a single source from four different IR Pickup devices. This sets you up with a clean, efficient 4-Display System while assuring the HDCP signals are correctly handled - giving you reliable, consistent HDMI connections at start-up and all day long.

®

HDS-14

Splitter Stabilizes and Corrects HDMI

Conditioning Splitter

1

2

3

HDMI Out ARC

Ethernet 10/100 BaseT

1. Aluminum mounting brackets included 2. Rugged Shielded aluminum enclosure brushed anodized surface

SPDIF In

Power In

HDBaseT

+24VDC Only

SPDIF ARC

HD-1

HDMI Extender

Receiver

with Full Feature Set

Ethernet

Link HDCP

Full Duplex

RS232

3. Rubber surrounds for shortprotection and safety.

IRDA In

Power

Speed

HDBaseT

Link

Out

1

2

3

4. EDID feedback LED 5. Output feedback LED 6. Input status LED 7. Power status LED 8. 4 IR inputs 9. IR output 10. Power switch 11. Function switch 12. HDMI In ACR+HEC 13. (3) Standard HDMI Outputs 14. (1) HDMI Output w/ ARC+HEC 15. Power Input 16. USB firmware update port HDS-14 Specifications INPUT:

HDMI (1)

OUTPUT:

HDMI (4)



Output #1: ARC, HEC, Stabilization Circuit – 3D, 2Kx4K, Hi Speed, xV Color



Output #2-4: Stabilization Circuit - 3D, 2Kx4K, Hi Speed, xV Color

IR IN:

(4) Mini-jack, mono for input of IR signal on carrier

IR OUT:

(1) Mini-jack, mono for pass-thru to emitter

POWER IN:

5V DC, .5A Power Supply included

CASE STYLE: Extruded Aluminum, Fully shielded and grounded WARRANTY:

3 Years Parts & Labor

Contributor Member of HDBase-T Alliance Authorized HDMI Adopter

©2012 Transformative Engineering, Inc.

781-769-6410 Norwood, MA 02062 USA

www.transformativeengineering.com

HL-2

Professional Lite HDMI Extender For those requiring a robust HDMI Extender without all the full functions and features of our Flagship Product, but wishing for the highly requested Audio Return Channel feature, we introduce the HL-2. Utilizing the latest version of HDBase-T known as “HDBase-T Lite”, the HL-2 offers HDMI extension up 70 Meters, along with Bi-Directional IR; all over a single CAT5e or CAT6 UTP cable. We continue with our tradition of a Single 24V Power Supply, injected at the Transmitter side. HDMI features include support for 4K x 2K resolution, 3-D, and all current Audio Formats including DTS-HD and Dolby True-HD.

®

Starting with our highly-regarded HL-1 Extender, requests for an enhanced and costeffective Extender with ARC from our Dealers led to the HL-2. The same care and quality that is built into

®

every one of our products continues with the HL-2.

HL-2 Product Highlights:

Included In Kit:

• One Single UTP (Cat5e/CAT6) Cable required

(1) HL-2TX HDMI Transmitter Module

• Powered via one (supplied 24V Power Supply)

(1) HL-2RX HDMI Receiver Module

• Audio Return Channel (ARC)

(1) 24V Power Supply

• Diagnostic Indicator lights for monitoring performance and operation

(2) Sets of Mounting Brackets

• Highest Quality Extruded Aluminum case for cooling, shielding, and safety

(1) SMA-1 IR Adapter Cord for Power-Pass applications

• IR Bi-Directional Pass Thru with Powered option. Adapter now Included for IR Pass-Thru

(1) Installation Manual

• Solid performance at 70 Meters at 1080p • Fully Automatic Cable length compensation. No dials or switches needed • Three (3) Year Warranty

(2) Sets of Heat-Sink Pressure Tape

HL-2

Professional Lite HDMI Extender

The Lite HDMI Extender Solution

1. Aluminum mounting brackets (included)

2. Rugged shielded aluminum enclosure, brushed anodized surface 3. Rubber surrounds for shortprotection and safety.

4. 5. 6. 7. 8.

IRDA Input HDMI In (or Out) with ARC Power feedback LED HDCP feedback LED Link feedback LED

9. HDBase-T RJ45 connector 10. +24VDC Power Input 11. IRDA Output

HL-2 Specifications Input Signal: HDMI Version 1.0 thru 1.4a IR Signal – Pass Thru (Xantech Compatible) IR Powered Pickup – Ring (Ground), Tip (Signal), Sleeve (+12VDC) Audio Return Channel

Audio Formats Supported: All HDMI Supported Formats, including DTS-HD,Dolby-HD, DVD-A, Dolby True-HD, 8-CH LPCM Output Signal: HDMI Version 1.0 thru 1.4a IR Signal – Pass Thru (Xantech Compatible) 12VDC at 500 Ma

Video Formats Supported: 480i/576i/480p/576p/720p/1080i/ 1080p/1080p@48bit

Maximum Distance: 70 Meters (230 Feet) with CAT6, 50 Meters (164 Feet) with CAT5e, @ 1080p, Greater distances at lesser resolutions Power Supply (included): 12VDC @ 1A Dimensions (Each): 9” W x 1.1” H x 3.75” D (with connector) Weight: 1.0 Lbs (Each)

Contributor Member of HDBase-T Alliance Authorized HDMI Adopter

©2012Transformative Engineering, Inc.

781-769-6410 Norwood, MA 02062 USA

www.transformativeengineering.com

HLE-1

HDMI Extender For those requiring a budget-minded, simple HDMI Extender without all the full functions and features of our Flagship Product, we introduce the HLE-1. Utilizing the latest version of HDBase-T known as “HDBase-T Lite”,

the

HLE-1

offers

HDMI

extension up 70 Meters, along with Bi-Directional IR; all over a single CAT5e or CAT6 UTP cable. We continue with our tradition of a Single 24V Power Supply, injected at the Transmitter side. HDMI features include support for 4K x 2K resolution, 3-D, and all current Audio Formats including DTS-HD and Dolby True-

®

HD. Starting with our highly-regarded HL-1 Extender, requests for a simplified and even lower priced Extender from our Dealers led to the HLE-1. The same care and quality that is built into every one of our products continues with the HLE-1.

HLE-1 Product Highlights:

Included In Kit:

• One Single UTP (Cat5e/CAT6) Cable required

(1) HLE-1TX HDMI Transmitter Module

• Powered via one (supplied) 24V Power Supply

(1) HLE-1RX HDMI Receiver Module

• Diagnostic Indicator lights for monitoring performance and operation

(1) 24V Power Supply

• High Quality Steel case for cooling, shielding, and safety

(1) Installation Manual

• IR Bi-Directional paths with Power for Pickup and Pass Thru using included SMA-1 adapter. • Solid performance at 70 Meters at 1080p • Fully Automatic Cable length compensation. No dials or switches needed • Three (3) Year Warranty

(1) SMA-1 IR Adapter Cable

HLE-1

Compact HDMI Extender Solution

HDMI Extender

1. Power Indicator LED 2. HDMI Handshake Indicator LED 3. HDBase-T Link Feedback LED

4. Rugged Shielded Steel enclosure 5. +24VDC Power Input (Transmitter Only) 6. IRDA Input 7. HDMI In (or Out)

8. IRDA Output 9. HDBase-T RJ45 connector

HLE-1 Specifications Input Signal: HDMI Version 1.0 thru 1.4a IR Signal – Pass Thru (Xantech Compatible) IR Powered Pickup – Ring (Ground), Tip (Signal), Sleeve (+12VDC) Video Formats Supported: 480i/576i/480p/576p/720p/1080i/ 1080p/1080p@48bit/4K (4:2:0)-30fps/60fps – Cable Dependent

Audio Formats Supported: All HDMI Supported Formats, including DTS-HD,Dolby-HD, DVD-A, Dolby True-HD, 8-CH LPCM Output Signal: HDMI Version 1.0 thru 1.4a IR Signal – Pass Thru (Xantech compatible)

Maximum Distance: 70 Meters (230 Feet)with CAT6, 50 Meters (164 Feet) with CAT5e, @ 1080p, Greater distances at lesser resolutions Power Supply (included): 12VDC @ 1A Dimensions (Each): 9” W x 1.1” H x 3.75” D (with connector) Weight: 1 lbs (Each)

Contributor Member of HDBase-T Alliance Authorized HDMI Adopter

©2014 Transformative Engineering, Inc.

781-769-6410 Norwood, MA 02062 USA

www.transformativeengineering.com

OB-2

Omni-Balun When is less – more? When you can do more with less! With the Omni-Balun, you now only need to stock one

SKU

on your trucks or in your warehouse instead of four or five! Our revolutionary Balun converts Analog Video (composite and component) and Analog and Digital Audio into CAT/5 or CAT/6 cable for extended runs of up to 300 feet at 1080i resolution. And it converts them all simultaneously! In addition, we’ve even included IRPass Thru connection on an industrystandard mini-jack!

Now your inventory needs can be reduced and you won’t be stuck on a jobsite with the wrong balun. That means less expense, less paperwork, and most important of all, less worry!

What more could you want? How about the highest quality conversion transformers, housed in a shielded, extruded aluminum enclosure? How about integrated wire-tie mounting points? You get all this in one balun for far less $$$ than what you’d normally pay for any combination of other baluns, because you’d need multiple models to achieve all of the functions contained within one Omni-Balun.

OB-2

Take a peek inside the OMNI-BALUN and look at the quality and construction.

Omni-Balun

1. High Quality Transformers 2. Computer-Grade multi-layer circuit board 3. Industry-standard IR mini jack

4. Rugged Shielded aluminum enclosure 5. Wire-Tie mounting points

6. Rubber surrounds for shortprotection and safety.

7. High Quality CAT5/6 connectors

The bottom line is that our omni-balun provides you with much more, for less! Because of its price, size, performance and incredible flexibility, it’s simply the best balun available.

781-769-6410 Norwood, MA 02062 U.S.A. ©2011 Transformative Engineering, Inc.

SB-1

Stereo Audio Balun Many times all you need is a simple device to route Stereo Audio over long distances, but want a high quality, fully shielded, BalancedLine for best hum rejection. This is it. With the addition of a 2-conductor pass-thru connection, you can also do IR or relay activation. These units, sold and used in pairs, are passive and require no power supply. They are good for 100 Meters of CAT5 or CAT6 UTP cable.

1. RCA stereo input /ouput 2. 1/8” mini for IR pass-thru 3. Rugged shielded aluminum enclosure brushed anodized surface 4. RJ-45 jack for UTP connection HDS-12 Specifications Connections: Stereo Line Level Audio, RCA (Male) type connectors (2)

IR: IR Passive connection rated for 65Volts AC or DC @ 1.5Amps



2-Conductor, 1/8” (Mini Phone Male) for IR Pass-Thru (1)

Warranty:

3 Years Parts and Labor

INCLUDED:



RJ-45 Jack for UTP Connection (1)

(2) SB-1 units per box (matched pair) (1) Dual-Female mini-jack adapter

Case Style: Extruded Aluminum, Fully shielded and grounded FREQ. Resp.:

20-20KHz +- 3dB, .1% THD@1KHz/1V p-p

Contributor Member of HDBase-T Alliance Authorized HDMI Adopter

©2012 Transformative Engineering, Inc.

781-769-6410 Norwood, MA 02062 USA

www.transformativeengineering.com