GPS RTK PROFESSIONAL UNMANNED SYSTEM

FENIX PLAN

FLY

CREATE

UNMANNED SYSTEM FENIX FENIX system is a modern and multifuncional unmanned platform based on miniaturized sub-assemblies and checked solutions. Composite materials of best quality, very precise measuring and optical systems assure high durability and effective operations, what translates into the highest quality of delivered data. The task of the system – depending on the used sensors – is to create elaborations on the basis of photogrammetric and teledetection techniques, to carry out inspection of energy infrastructure or to reconnoitre from the air. High autonomy of the FENIX system in connection with implemented safety procedures translates into exceptional comfort of usage.

TECHNICAL DATA Wingspan Total length Total height Empty plain weight Maximum starting weight The true air speed Minimum speeed Maximum speed Flight durability Ascention speed Maximum track length Maximum air raid area Maximum resolution Telemetry range Propulsion Battery Propeller Starting Landing Transporting box Material

1900 mm 1280 mm 400 mm 1800 g 3200 g 14 m/s 9 m/s 18 m/s 45-60 min 5 m/s 35 km 12 km2 1 cm/px up to 7 km electric engine 700 W Li-Po 10 Ah three-blade, collapsible From the hand On the bottom of the plane 1400x350x350 mm EPO material structure, fuselage reinforced with composite materials

COMFORT AND SAFETY IN USAGE

Plan your flight Any mission starts by its careful planning. A ground station software will lead you step by step through the subsequent stages of planning, at the same time enabling comfortable and exact compatibility of the mission to your needs and prevailing conditions. A number of procedures and protection guarantees maximum ease in planning your air raid, at the same time preserving high level of safety.

Do this! Send a flight plan to the plane, activate the stand-alone mode and start a mission by throwing away the plane from your hand. Ingenious construction of the airframe enables starting without using ejector seat. The rest will be done by the autopilot. During the flight you can continuously monitor parameters and when needed activate proper emergency procedures.

Process the data Right after the landing transfer the gathered data from the plane, then process it using optional photogrammetric software. When purchasing FENIX you have an opportunity to buy the high-class software – AgiSoft Photoscan or Pix 4D.

5 REASONS TO CHOOSE

FENIX

Reinforced platform structure A fuselage and fin of the airframe are reinforced with an additional composite material. Shock-absorption, replaceable elements of the fuselage and reinforced leading edge decrease the risk of the structural damage, what ensure you longevity of the sub-assemblies of the plane.

Comfortable exploitation Compact transporting box enables comfortable and safe tranport of the FENIX system. Easy and intuitive connections in a plane, clear checklists and reliable communication between computer and telemetry system guarantees the operator high comfort of work with the system.

Safe and eco-friendly propulsion FENIX is equipped with a quiet, economical and ecological powertrain, supplied with Lithium-Polymer battery packs. The placement of the airscrew guarantees its protection from the landing damages and the high level of the operator’s safety.

Changable optical modules Universal points of clamping the charge enable fast and easy equipment module changes – cameras or other sensors. In a standard configuration the plane is equipped with a photo camera Sony with a resolution of 24 MPx and Voigtlander lens, placed on a stabilized head.

High level of safety Dedicated software of planning and controlling the flight together with a number of carefully elaborated operating procedures assures the highest level of safety. The air lightning guarantees exceptional visibility of the plane for all of the airspace users.

FIRST OF ALL - PRODUCTIVITY High durability of the flight and mechanical stabilisation of the sensors assures high productivity of the system. Application of a photo camera of high resolution enables taking pictures of a resolution even up to 1 cm/px.

Terrain resolution

Covered area

Air raid altitude

Focal length

1,5 cm/px 2 cm/px 3 cm/px 5 cm/px 10 cm/px 15 cm/px

1,1 km2 1,5 km2 2,3 km2 3,6 km2 6,9 km2 10 km2

150 m 200 m 300 m 250 m 500 m 750 m

40 mm 40 mm 40 mm 21 mm 21 mm 21 mm

Productivity of the FENIX system with assumed longitudinal coverage of photos 80% and transverse coverage 40%.

SECONDLY - SAFETY Special security system and procedures connected with a professional operators‘ introduction assures the highest level of safety while using the FENIX system. Dedicated communication system enables monitoring flight parameters as well as vast interference in the flight. At any moment the operator has an ability to take full control over the plane by using emergency control system.

THIRDLY – VERSATILITY Thanks to the modular construction and ample opportunities of adapting the FENIX platform to accomplish specified tasks, the system is characterized by versatility of applications. Depending on the used sensors, way of mission accomplishment and data analysis, FENIX is applied in trades such as geodesy, agriculture and forestry, environmental protection (orthophotomaps, digital elavation models, teledetection), rescue missions (reconnaissance and search operation) or power engineering (inspections of transmission networks).

WHAT THE SET INVOLVES?

- the autonomous flying platform FENIX with the equipment necessary for the flight

(laminated fuselage, a pair of wings, autopilot, electronic equipment necessary for the flight, tripod for the plane)

- a laptop with the ground station of flight planning and control software

(a laptop with the i5 processor, 8GB RAM, SDD disc 128GB or HDD 500 GB, with the software of the ground station)

- FlyTech Radio Link communication system and the 2,4 GHz control apparatus (set of modems and antenna, tripod, 10-cannal RC apparatus)

- photo camera Sony A6000 + Voigtlander lens 40 mm (photo camera, lens, UV filter, battery, SD card, stabilizing head)

- 2 Li-Po battery sets, AC adapter, battery charger, tester

(2 batteries, 230V AC adapter, battery tester, universal battery charger, fireproof bag)

- manual of the system in English + book of flights (manual + book of flights, checklist set)

- transporting box with the set of tools and spare parts

(box with the shock-absorption and foam filling, spare airscrews, screws and a set of tools)

- theoretical and practical training for 2 operators for the type

Wide choice of extra equipment Open and modular design of the FENIX system allows you to choose from a wide spectrum of the extra equipment. Ask your dealer about the possibilities of adjusting the platform for moving a particular sensor.

Multispectral camera WIDE CHOICE OF MODELS

Thermal imaging camera WIDE CHOICE OF MODELS

Sony photo cameras

Sony, Carl Zeiss, Voigtlander lenses

FUTURE IS

UNMANNED

Where to buy GRYF System? Write an e-mail and ask [email protected] About FlyTech UAV sp. z o.o. FlyTech UAV Develops, produces and implements to the market modern unmanned flying systems, based on planes and multirotors. FlyTech products are designed for the geodesy market, agriculture, environmental protection, rescue or power engineering. FlyTech UAV sp. z o.o., ul. Balicka 18A, 30-149 Kraków, NIP: 677 239 10 21 tel.: +48 690 446 590, e-mail: offi[email protected], www.flytechuav.com