The Quinn lntegrale radiators have a beautiful finish, with factory fitted top grille and decorative side panels. These radiators have a safe rounded bottom edge, so no sharp weld seam . The lntegrale has 6 connections with an integrated ventile pipe that diverts flow and heat regulation to the top of the radiator. The pipework is connected to the bottom side of the radiator and is discreetly concealed below the radiator. As all pipework is connected at the bottom on one side pipework can easily be pre-installed irrespective of the radiator length. Types 21,22 and 33 are reversible and can be connected with the thermostatic valve on the right (standard position) or left using the specially designed 'J' brackets (optional not included in the price quoted, air vent and blanks are included). Type 11 is not reversible and only available with the thermostatic valve on the right hand side.

The standard colour for Quinn panel radiators is RAL9016 .

n RAL9016

The lntegrale combines original design with unrivalled quality. Our radiators are tested at nationally and internationally acknowledged laboratories and are accredited in accordance with BS EN 442, CE, NF, Kite mark and DIN . Quality assurance is backed with Quinn 10-year warranty! (See terms and conditions)

The lntegrale radiator has the highest heat output per m2 on the market. The excellent yield is possible because of the unique concept of pressing the panels . By using a narrower spacing (25mm) between water channels, more convection fins can be attached to the panel. These are welded directly to each water channel, which creates an exponential increase in heat output. Low water content within the narrow water channels causes the radiator to heat up faster and consequently emit heat more rapidly to the surrounding area . In addition the welded hanging brackets for type 11 gua-rantee a more discrete hanging profile on installation (incl. supplied L-brackets, air vent and blanks).

E

GCE

OuJNN~radiators

panel radiators

EN!Im

All dimensions are in mm. Heat outputs in Watts - at .6.T50 (75/65/20 "( in accordance with EN 442)

SKU: Q XX Y ZZ VSKD Q

33 9 08 VSKD

Type -~ Heigh t-

I

Leng th lnt eg rale

Tables of dimensions Cross section of radiator: front view Length = 395 - 2395

-----------

50

1---l

40

t.J

;u::u: p:g~

If


300 253

w

560 9,70 1,70 1,3383

kg L n

400 353

w

729

kg

12,75 2,19 1,3358 885 15,80 2,69 1,3334 1031 18,85 3,19 1,3309 1166 21,90 3,68 1,3360 1406 28,00 4,68 1,3462

L n

500 453

w kg L n

600 553

w kg L n

700 653

w kg L n

900 853

w kg L n

828 15,20 3,39 1,3066 1041 20,05 4,39 1,3177 1239 24,90 5,38 1,3288 1425 29,75 6,38 1,3399 1601 34,60 7,37 1,3502 1924 44,30 9,36 1,3708

"'

J

u

1095 18,11 3,39 1,3160 1390 24,11 4,39 1,3275 1662 30,11 5,38 1,3389 1914 36,10 6,38 1,3504 2149 42,10 7,37 1,3587 2570 54,10 9,36 1,3753

1591 27,02 5,09 1,3195 2019 36,00 6,58 1,3358 2407 44,98 8,07 1,3520 2757 53,96 9,56 1,3683 3073 62,94 11,05 1,3740 3612 80,90 14,04 1,3853

w = Heat emission in Watts kg ; We ight L ; Water co nte nt n ; Coeffi cient Above data calculated per meter radiator length at 75/65/2o•c in accordance w ith EN 442.

Possible connections with insert (front view) T VD T

B

B

V Only for types 21, 22 and 33

B

•• ••

B

V = Vent I B = Blank I T = Thermostati c valve

-o v-o v Other possible connections

B DV

-

BB B

B

BB -

-

BB -

vo -

vo -

VD B

B

BB - -

BB -

-

BB B

OUINN~radiators

panel radiators Types

Working pressure

The Quinn lntegrale radiator is available in type 11, 21, 22 and 33.

All radiators are pressure tested at 13 bar and are suitable for a working pressure up to 10 bar. The maximum operating temperature is 110°C (in accordance with EN 442-1).

Paint

Steel thickness

Quinn uses a painting procedure that is used in the automotive industry. All Quinn radiators have been fully treated against rust.

All Quinn radiators are produced with high quality cold rolled steel in accordance with EN 442-1 . After painting the nominal gauge thickness of the radiator is 1,25mm.

Firstly, they are degreased . Then a water-based electrophoretic base coat is applied . After this, the radiators are powder coated with an epoxy polyester powder. The total paint coat thickness is 60 micron minimum . This painting procedure protects the radiators against rust, damage and scratching .

Colour Our standard final coat is a 60% gloss finish RAL 9016 (white).

Connections All radiators are supplied with 6 x Y2" BSP connections .

Packaging In order to avoid any damage during transport and storage, the four sides of each radiator are protected with cardboard . lt is not necessary to remove the packaging for installation . Therefore the risk of damage is very low.

Heat outputs The heat outputs from the Quinn integrale radiator vary between 292W and 5514W- at ~TSO (75/65/2o·c in accordance with EN 442), dependent on the dimensions and the type.

Heights

Warranty Quinn lntegrale radiators are manufactured to comply with ISO 9001 . 10 Year guarantee with all radiators . Heat outputs have been independently tested and comply with EN 442 at ~TSO (75/65/20.C).

Conversion information (11 T Factors)

The Quinn lntegrale radiator is available in heights from 300mm up to 900mm inclusive.

The outputs quoted in this publication are based on~ T so·c. To calculate other operating conditions the following example should be applied :

Lengths The Quinn lntegrale radiator is available in lengths from 400mm up to 2400mm inclusive.

Example: Add flow water temperature (75.C) and return water temperature (65.C) together (140.C) divide by 2 (70.C) and then subtract the room temperature (20.C). This will give you a ~T factor of so·c.

Dimensional tolerance All dimensions conform to EN 442-1 .

For ~T factors other than so·c use the following formula : (System ~T/SO)N x catalogue output at ~Tso·c (where there is no 'n' value stated use 1,3)

Accessories Thanks to the ingenious design of the type J suspension brackets the lntegrale types 21, 22 and 33 are reversible. Blanks and air vent are included in the packaging . For type 11, L-brackets are also included in the packaging .

Notice

Materials The Quinn lntegrale radiators are manufactured from high quality cold rolled steel.

Please ensure that the wall and fixings used are able to support the weight of the radiator, if in doubt seek advice from a qualified professional i.e. Engineer or Architect. Alternative load bearing feet are available on request.

Quinn Group Belgium NV maintains the right to change any of its products' technical characteristics at any time and without prior notification. Quinn Group Belgium NV will not be held responsible for any printing errors. For terms of sale www.quinn - radiators.com QUINN GROUP BELGIUM NV LEAFLET- ENGLISH VERSION© COPYRIGHT 2015 All RIGHTS RESERVED- PRINTED IN BELGIUM 12/2015

YOUR WHOLESALER:

Quinn Group Belgium NV Van Doornelaan 2A B-2440 Geel tel .: 0032 (0) 14 50 00 11 fax : 0032 (0) 14 50 75 69 web : w w w .quinn-radiators .com

QC 01-12-15

[!]

OuJNN~radiators