Technical Specification Sheet Document No. A6V10455751 December 3, 2014
GAMMA Stand-alone Lighting Control Products Siemens Product Number
Leviton Product Number
Technical Specification Sheet Number
For dimming incandescent, magnetic low-voltage, halogen, neon/cold cathode lighting. 1920 W/1920 VA @ 120 Vac, 50/60 Hz.
LCE-6100-120
PE100-10W
G6723
Works with Mark X™, Powerline, and Hi-lume® 1920 W/1920 VA @ 120 Vac, 50/60 Hz
LCE-6210-FLD
PE200-10W
G6723A
Works with Mark X, Powerline, and Hi-lume 3000 VA @ 277 Vac, 50/60 Hz
LCE-6270-FLD
PE200-70W
G6723A
Works with electronic low voltage and incandescent 1000 W/1000 VA @ 120 Vac, 50/60 Hz
LCE-6400-120
PE400-10W
G6836
LCH-5724-WH
VPT24-1PZ
G8264
Relay rating: incandescent 1000W, fluorescent 1000 VA Power input: 120 Vac, 60 Hz, 1.45 W
LCL-2525-120
ODC0S-I1W
G8334
Relay rating: incandescent 1000W, fluorescent 2700 VA Power input: 277 Vac, 60 Hz, 1.89 W
LCL-2530-277
ODC0S-I7W
G8334
Relay rating: 120/277/347 Vac, 800/1200/1500 VA Power input: 120/277/347 Vac, 50/60 Hz
LCL-2540-HB
OSFHU-ITW
G7366G
Relay rating: 240/480 Vac, 2000 VA Power input: 240/480 Vac, 50/60 Hz
LCL-2545-2P
OSFHU-I4W
G7366G
Passive Infrared (PIR) 360°/1500 sq ft at 8 ft, 30 sec to 30 min. Major motion area: 50 ft Ø Minor motion area: 20 ft Ø
LCO-2250-PIR
OSC15-I0W
G6987A
Multi-technology sensor, 180°/500 sq ft at 8 ft, 30 sec to 30 min. Major motion area: 64 ft × 32 ft Minor motion area: 45 ft × 23 ft
LCO-2255-MT
OSC05-M0W
G8357
Multi-technology sensor, 360°/2000 sq ft at 8 ft, 30 sec to 30 min. Major motion area: 64 ft × 32 ft Minor motion area: 45 ft × 23 ft
LCO-2260-MT
OSC20-M0W
G8357
Multi-technology sensor with isolated HVAC (Class 2) relay (30 Vdc, 1A), 360°/2000 sq ft at 8 ft, 30 sec to 30 min. Major motion area: 64 ft × 32 ft Minor motion area: 45 ft × 23 ft
LCO-2265-MT
OSC20-RMW
G8579
Photo
Description
LCE: Dimming Power Extender (Requires Gamma Universal Dimmer) Power Extender
LCH: Astronomic Time Switch with Manual Override (Stand-alone) 24-hour LCD Programmable Timer Switch with Astronomic Functions Power input: 120 Vac, 60 Hz, neutral is required. Relay load rating: 120V 1800W incandescent, 15A resistive/inductive, 1 hp @ 120 Vac LCL: Line Voltage Occupancy Sensors (Stand-alone) Line Voltage Ceiling Occupancy Sensor
Line Voltage Fixture/Box Mount Occupancy Sensor
LCO: Ceiling and Wall Mount Sensors (Stand-alone or connect to 5WG1 220-2DB31 I/O Pushbutton Interface) Ceiling Mount Occupancy Sensor
Siemens Industry, Inc.
Page 1 of 4
Siemens Product Number
Leviton Product Number
Technical Specification Sheet Number
LCO-2310-MT
OSW12-M0W
G7732A
LCO-2315-HB
OSWHB-I0W
G7734A
LCO-2320-COR
OSWLR-I0W
G7733A
Power input: 120/230/277 Vac, 50/60 Hz Control input: 24 Vdc, 5 mA from LCO sensors Power output: 24 Vdc, 150 mA to LCO sensors and LCS LV wall switches Relay load rating: 20A fluorescent/incandescent @ 120V; 20A fluorescent @ 230-277V; 1 hp @ 120V, 2 hp @ 240V
LCR-2410-ODO
OSP20-D0
G8226B
With Dry Contact Relay Power input: 120/230/277 Vac, 50/60 Hz Control input: 24 Vdc, 5 mA from LCO sensors Power output: 24 Vdc, 150 mA to LCO sensors and LCS LV wall switches Relay load rating: 20A fluorescent/incandescent @ 120V; 20A fluorescent @ 277V; 1 hp @ 120V, 2 hp @ 240V HVAC relay rating: 0.5A @ 125 Vac, 1.0 A, 30 Vdc
LCR-2415-RDO
OSP20-RD0
G8226B
With Dry Contact Relay Power input: 347 Vac, 60 Hz Control input: 24 Vdc, 5 mA from LCO sensors Power output: 24 Vdc, 120 mA to LCO sensors and LCS LV wall switches Relay load rating: 15A fluorescent @ 347V; 1 hp @ 120V, 2 hp @ 240V HVAC relay rating: 0.5A @ 125 Vac, 1.0A, 30 Vdc
LCR-2425-R30
OSP15-R30
G8226B
With Dry Contact Relay and Override Inputs for Occupancy Sensors Power input: 120/230/277 Vac, 50/60 Hz Control input: 24 Vdc, 5 mA from LCO sensors Power output: 24 Vdc, 225 mA, 5.4W to LCO sensors and LCS LV wall switches Relay load rating: 20A fluorescent/incandescent @ 120V; 20A fluorescent @ 277V; 1 hp @ 120V, 2 hp @ 240V; HVAC; 0.05A @ 120 Vac, 1A @ 20 Vdc and 15A fluorescent @ 347V; 1 hp @ 120V; 2 hp @ 240V HVAC relay rating: 0.5A @ 125 Vac (Class 1) or 1.0A @ 30 Vdc (Class 2)
LCR-2420-RDH
OSP20-RDH
G8226B
.. LCR-2430-ODW
OPB15-ODW
G8533
LCS-5610-V
56081-2I
560812I
LCS-5610-W
56081-2W
560812W
Photo
Description Wall/Corner Mount Occupancy Sensor Multi-technology sensor, 110°/1200 sq ft at 8 ft, 30 sec to 30 min Major motion area: 68 ft × 50 ft Minor motion area: 32 ft × 32 ft Wall/Corner Mount Aisle (High Bay) Occupancy Sensor PIR 55 ft × 7 ft at 20 ft (max mounting height 30 ft), 30 sec to 30 min Major motion area: 120 ft × 14 ft Wall/Corner Mount Aisle (Long Range) Occupancy Sensor PIR 100 ft × 33 ft at 10 ft, 30 sec to 30 min, Major motion area: 100 ft × 14 ft
LCR: Power Packs for LCO Low Voltage Ceiling and Wall Mount Sensors (Stand-alone or dry contract may connect to 5WG1 220-2DB31 I/O Pushbutton Interface) Power Pack, UL 2043 Plenum-rated
Ceiling Box-mount Occupancy Sensor Power Base Adaptor Power input: 120/277 Vac, 60 Hz, 40 mA Control input: 24 Vdc, 5 mA from LCO sensors Power output: 24 Vdc, 40 mA for one LCO sensor Relay load rating: 120/277V 15A incandescent, electronic or magnetic fluorescent ballast, 3/4 hp at 120V LCS: Low Voltage Decora® Style Switches Requires 5WG1 220-2DB31 I/O Pushbutton Interface 3A, 24V, single pole, double-throw, center-off, self grounding, back and side wired, Decora wall plate not included (001-ODS0D-IDI) Ivory White
Page 2 of 4
Siemens Industry, Inc.
Photo
Description
Siemens Product Number
Leviton Product Number
Technical Specification Sheet Number
LCW: Line Voltage Decora Wall Switches with Occupancy Sensors (Stand-alone) Wall Box PIR Occupancy Sensor, 180°/2100 sq ft at 4 ft 120/277 Vac, 60 Hz, neutral not required, external power pack not required, Decora wall plate not included (001-ODS0D-IDI) Single pole, single relay, manual on time delay 30 sec to 30 min. Relay load rating: Incandescent 800W @ 120V; Fluorescent 1200 VA @ 120V, 2700 VA @ 277V Motor: 1/4 hp @ 120V Ivory
LCW-2210-V
ODS10-IDI
G8333B
White
LCW-2210-W
ODS10-IDW
G8333B
Single pole, dual relay, manual on time delay 30 sec to 30 min. Relay 1 load rating: Incandescent 800W @ 120V; Fluorescent 1200 VA @ 120V, 2700 VA @ 277V Relay 2 load rating: Incandescent 800W @ 120V; Fluorescent 800 VA @ 120V, 1200 VA @ 277V Motor: 1/4 hp @ 120V Ivory
LCW-2215-V
ODS0D-IDI
G8318A
White
LCW-2215-W
ODS0D-IDW
G8318A
Wall Box Multi-technology Occupancy Sensor, 180°/2400 sq ft at 4 ft 120/277 Vac, 60 Hz, neutral not required, external power pack not required, Decora wall plate not included (001-ODS0D-IDI) Single pole, single relay, manual on time delay 30 sec to 30 min. Relay load rating: Incandescent 800W @ 120V; Fluorescent 1200 VA @ 120V, 2700 VA @ 277V Motor: 1/4 hp @ 120V Ivory
LCW-2220-V
OSSMT-GDI
G7357D
White
LCW-2220-W
OSSMT-GDW
G7357D
Single pole, dual relay, manual on time delay 30 sec to 30 min. Relay 1 load rating: Incandescent 800W @ 120V; Fluorescent 1200 VA @ 120V, 2700 VA @ 277V Relay 2 load rating: Incandescent 800W @ 120V; Fluorescent 800 VA @ 120V, 1200 VA @ 277V Motor: 1/4 hp @ 120V Ivory
LCW-2225-V
OSSMD-GDI
G8013C
White
LCW-2225-W
OSSMD-GDW
G8013C
Wall Box PIR Occupancy Sensor with Night Light, 180°/1200 sq ft at 4 ft 120/277 Vac, 60 Hz, neutral is required, external power pack not required, Decora wall plate not included (001-ODS0D-IDI) Single pole, single relay, manual on time delay 30 sec to 2 hours. Relay load rating: Incandescent 800W @ 120V; Fluorescent 1200 VA @ 120V, 2700 VA @ 277V Motor: 1/8 hp @ 120V Ivory
LCW-2230-V
OSSNL-IDI
G7543B
White
LCW-2230-W
OSSNL-IDW
G7543B
Siemens Industry, Inc.
Page 3 of 4
Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as design improvements are introduced. APOGEE and Insight are registered trademarks of Siemens Industry, Inc. Other product or company names mentioned herein may be the trademarks of their respective owners. © 2014 Siemens Industry, Inc. Siemens Industry, Inc. Building Technologies Division 1000 Deerfield Parkway Buffalo Grove, IL 60089-4513 USA Tel. 1 + 847-215-1000
Your feedback is important to us. If you have comments about this document, please send them to
[email protected].
Document No. A6V10455751 Printed in the USA Page 4 of 4
PE100-1
Product Specifications
PE100-1 Power Extender APPLICATION
PE100-1 Power Extender
Leviton’s PE100-1 Power Extender allows a dimming zone’s power handling capacity to be extended to a full 1920W/VA on 120V input power. It allows a zone to dim or switch a fully loaded circuit of incandescent and magnetic low voltage loads only.
FEATURES & BENEFITS • Works with incandescent, magnetic low voltage, halogen or neon/cold cathode lighting • Low-end trim available for setting the minimum brightness level • Emulates the characteristics of the dimmer that it is connected to in terms of dimming range and resolution • Works with any Dimensions Multi-zone Controller/Dimmer to extend load capacity on any zone
4.50 (114.3 mm)
2.80 (71.1 mm)
4.72 (119.9 mm)
2.06 (52.3 mm)
MOUNTING All Power Extenders must have 4-1/2" spacing above and below each unit for proper ventilation and heat dissipation (refer to figure 3). Line voltage wiring should be at least 6ft away from sound or electronic equipment wiring. Mount Power Extender to wall box with “TOP” facing up as follows: For Wall Box Mounting (refer to figure 1), for Flush Mounting (refer to figure 2) and for Panel Mounting (not shown), proceed as follows: a. The enclosure must be in accordance with all local and national electrical codes. b. Leviton DOES NOT recommend using a door to enclose the front of a panel, since this restricts airflow to the controls. c. If mounting multiple controls in an enclosure: • Ambient timperature within an enclosure “MUST REMAIN BETWEEN”32 o-104o F (0 o-40 oC). • If not mounting in a metal enclosure, all units “MUST” be mounted in a wall box. d. To improve heat dissipation of controls, remove the faceplate from the unit.
Figure 3: Front View Spacing 1900 Box TOP
2 Gang Raised Cover Raised Cover Mounting Screws (4 Places)
TOP
4-1/2" (11.4 cm) Minimum
Power Extender
Figure 1: Surface Mounting
Power Extender Wallplate
TOP
1900 Box 2 Gang Raised Cover Raised Cover Mounting Screws (4 Places)
4-1/2" (11.4 cm) Minimum
TOP
Power Extender
Figure 2: Flush Mounting
Power Extender Wallplate
SPECIFICATION SUBMITTAL JOB NAME:
CATALOG NUMBERS:
JOB NUMBER:
Leviton Mfg. Co., Inc. 59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
Visit our Website at: www.leviton.com
1
Product Specifications
PE100-1 .........................
SPECIFICATIONS
Wiring Diagram 1A: Single Feed Wiring Application w/Controller
Warranty: Limited 2-Year Warranty
(Load)
Single Feed Wiring Line Hot can be controlled by one circuit breaker as long as the total load does not exceed the Power rating of the Extender circuit breakers.
D3206/08 Controller/Dimmer
HOT
Neutral Line
SWITCH HOT
LOAD
NEUTRAL
CONTROL
• For Box-Mounted Dimmers: Must use a 120V, 600W Incandescent version from the following families: IllumaTech™, Mural™, True Touch™, ToggleTouch™, TouchPoint™ and Home Controls • For Monet™ installations, use a 120V, 600VA Monet Magnetic Low Voltage dimmer (requires a Neutral wire) • For dimmers that include a Neutral wire (such as some scene-capable dimmers), the dimmer Neutral wire must be connected • For Architectural Systems: Works with all families
Hot (Black) (120VAC)
Environmental Operating Temperature Range: 0ºC to 40ºC Storage Temperature Range: -10ºC to 85ºC Relative Humidity: 20%-90% non-condensing
NEUTRAL
Compatibility
Load
Green Ground
LOAD Neutral (White)
Wiring Diagram 1B: Single Feed Wiring Application w/Dimmer Used if Dimmer/Switch has Neutral connection
Hot (Black) (120VAC)
(Load)
Single Feed Wiring Line Hot can be controlled by one circuit breaker as long as the total load does not exceed the rating of the Power Extender circuit breakers.
Physical Color: Aluminum clear anodized extruded heat sink with a snap-on molded white cover Size: 4.72"L x 4.5"W x 0.5"H (120mm x 114mm x 12.7mm)
HOT
LOAD
NEUTRAL
SWITCH HOT
Dimmer
CONTROL
Input Voltage: 120V, 50/60Hz Load Rating: 1920W/VA Load Output Power: Phase independent of control device Dimmer Input: 120V 50/60Hz Testing/Code Compliance: UL Listed, CSA Certified and FCC Part 15
NEUTRAL
Electrical
White Black Load
Green Ground
LOAD Neutral (White)
Wiring Diagram 2A: Dual Feed Wiring Application w/Controller
Wiring Diagram 2B: Dual Feed Wiring Application w/Dimmer Used if Dimmer/Switch has Neutral connection
Hot (Black) Line 1 (120VAC)
(Load)
Green Ground
LOAD
Hot (Black) Line 2 (120VAC)
Neutral 2 (White)
Neutral 2 (White)
Wiring Diagram 3: Dual Feed Wiring Application w/Dimmer and Two Power Extenders Hot (Black) Line (120VAC)
(Load)
(Load)
D3206/08 Controller/Dimmer
Power Extender
HOT
SWITCH HOT
LOAD
CONTROL
NEUTRAL
NEUTRAL
SWITCH HOT
HOT
LOAD
CONTROL
NEUTRAL
NEUTRAL
Neutral (White)
Dual Feed Wiring The Input control circuit and the Output load circuit can be supplied by two circuit Power breakers on Extender a single phase or by two separate Hot (Black) Line 1 (120VAC) phases.
Neutral Line Load
Note: Up to 4 Power Extenders can be Connected together.
Green Ground
LOAD 1
Neutral (White) Hot (Black) Line 2 (120VAC)
LOAD 2
Neutral (White)
Leviton Mfg. Co., Inc. 59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
Visit our Website at: www.leviton.com
© Copyright 2003 Leviton Manufacturing Co., Inc. All rights reseved. G-6723/G3
SWITCH HOT
HOT
LOAD
Dimmer
NEUTRAL
HOT
Dual Feed Wiring The Input control circuit and the Output load circuit can be supplied by two circuit breakers Power on a single phase Extender or by two separate phases.
Load
Hot (Black) Line 2 (120VAC)
(Load)
Neutral 1 (White)
Neutral Line
SWITCH HOT
LOAD
CONTROL
NEUTRAL
Dual Feed Wiring The Input control circuit and the Output load circuit can be supplied by two circuit breakers on a single phase Power Extender or by two separate phases.
NEUTRAL
D3206/08 Controller/Dimmer
CONTROL
Neutral 1 (White)
NEUTRAL
Hot (Black) Line 1 (120VAC)
White Black Load
Green Ground
LOAD
PE200-1/ PE200-7
Product Specifications
PE200-1/PE200-7 Power Extenders APPLICATION
FEATURES & BENEFITS • Works with Mark X or Hi-lume® 120V (Cat. No. PE200-1) and 277V (Cat. No. PE200-7) dimmable ballasts • Low-end trim available for setting the minimum brightness level • Emulates the characteristics of the dimmer that it is connected to in terms of dimming range and resolution • Works with any Dimensions Multizone Controller/Dimmer when zone is set-up as fluorescent dimmer to extend load capacity on any zone
4.50 (114.3 mm)
4.72 (119.9 mm)
2.80 (71.1 mm)
2.06 (52.3 mm)
Mark X is a trademark of the Advance Transformer Company. Hi-lume is a registered trademark of Lutron Electronic Co., Inc.
Physical
SPECIFICATIONS Compatibility • For Box Mounted Dimmers: Must use a 120V, 600VA Mark X version from the following families: Monet™, IllumaTech™, Mural™, and TouchPoint™ • For dimmers that include a Neutral wire (such as some scenecapable dimmers), the dimmer Neutral wire must be connected • For Architectural Systems: Works with all families
Electrical Input Voltage: 120V, 50/60Hz (PE200-1); 277V 50/60Hz (PE200-7) Load Rating: 1920VA@120VAC fluorescent (PE200-1); 3000VA@277VAC fluorescent (PE200-7) Load Output Power: Phase independent of control device Dimmer Input: 120V 50/60Hz for PE200-1 and PE200-7 Testing/Code Compliance: UL Listed, CSA Certified and FCC Part 15
Color: Aluminum clear anodized extruded heat sink with a snap-on molded white cover Size: 4.72"L x 4.5"W x 0.5"H (120mm x 114mm x 12.7mm)
PE200-1/PE200-7 Power Extenders
• Leviton’s PE200-1 Power Extender allows a dimming zone’s power handling capacity to be extended to a full 1920VA on 120V input power. The PE200-1 will drive 120V Advance Mark X™ or equivalent dimmable fluorescent ballasts only. • Leviton’s PE200-7 Power Extender allows a dimming zone’s power handling capacity to be extended to a full 3000VA on 277V input power. The PE200-7 will drive 277V Advance Mark X or equivalent dimmable fluorescent ballasts
Environmental Operating Temperature Range: 0ºC to 40ºC Storage Temperature Range: -10ºC to 85ºC Relative Humidity: 20%-90% non-condensing Warranty: Limited 2-Year Warranty
SPECIFICATION SUBMITTAL JOB NAME:
CATALOG NUMBERS:
JOB NUMBER:
Leviton Mfg. Co., Inc. 59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
Visit our Website at: www.leviton.com
1
PE200 Wiring Diagram 1A 120V Single Feed Wiring Application w/Mark X™ Ballast )
Used if Dimmer/Switch has Neutral connection (
Hot (Black) (120VAC)
120V Mark X™ Type Dimmer
SWITCH HOT
HOT
LOAD
CONTROL
NEUTRAL
D3206/08 Controller/Dimmer
NEUTRAL
Single Feed Wiring Line Hot can be controlled by one circuit breaker as long as the total load does not exceed the rating of the circuit breaker.
(Load)
Neutral Line
Neutral
OR
Line Load
Load Green Ground
Power Extender
INPUT
Green Ground
OUTPUT
LOAD Black White
Neutral (White)
MARK X™ DIMMABLE BALLAST
Wiring Diagram 1B 120V Dual Feed Wiring Application w/Mark X™ Ballast Used if Dimmer/Switch has Neutral connection (
Hot (Black) Line 1 (120VAC)
)
(Load)
Neutral 1 (White)
Power Extender
SWITCH HOT
HOT
LOAD
NEUTRAL
CONTROL
NEUTRAL
Dual Feed Wiring The Input control circuit and the Output load circuit can be supplied by two circuit breakers on a single phase or by two separate phases.
120V Mark X™ Type Dimmer
D3206/08 Controller/Dimmer Neutral Line
OR
Load
Neutral Line Load
Green Ground INPUT
Green Ground
OUTPUT
LOAD
Hot (Black) Line 2 (120VAC)
Black
Neutral 2 (White)
White
MARK X™ DIMMABLE BALLAST
Wiring Diagram 2A 120V Single Feed Wiring Application w/Hi-lume® Ballast Used if Dimmer/Switch has Neutral connection (
Hot (Black) (120VAC)
(Load)
120V Mark X™ Type Dimmer
SWITCH HOT
HOT
LOAD
NEUTRAL
CONTROL
D3206/08 Controller/Dimmer
NEUTRAL
Single Feed Wiring Line Hot can be controlled by one circuit breaker as long as the total load does not exceed the rating of the circuit breaker.
)
Neutral Line
OR
Load
Neutral Line Load
Green Ground
Power Extender
INPUT
Green Ground
OUTPUT
LOAD Orange
120V Hi-lume® Black BALLAST White
Neutral (White)
Wiring Diagram 2B 120V Dual Feed Wiring Application w/Hi-lume® Ballast Used if Dimmer/Switch has Neutral connection (
Hot (Black) Line 1 (120VAC)
)
(Load)
Neutral 1 (White)
Power Extender
Hot (Black) Line 2 (120VAC) Neutral 2 (White)
SWITCH HOT
HOT
LOAD
NEUTRAL
CONTROL
NEUTRAL
Single Feed Wiring Line Hot can be controlled by one circuit breaker as long as the total load does not exceed the rating of the circuit breaker.
120V Mark X™ Type Dimmer
D3206/08 Controller/Dimmer
Neutral
Neutral Line
OR
Load
Green Ground INPUT
Line Load
Green Ground
OUTPUT
LOAD Orange 120V Hi-lume® Black BALLAST White
Leviton Mfg. Co., Inc. 59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
2
Visit our Website at: www.leviton.com
© Copyright 2003 Leviton Manufacturing Co., Inc. All rights reserved.
PE200 Wiring Diagram 3A 277V Dual Feed Wiring Application w/Mark X™ Ballast )
Used if Dimmer/Switch has Neutral connection (
Hot (Black) Line 1 (120VAC)
(Load)
Neutral 1 (White)
Power Extender
HOT
Neutral
Neutral Line
SWITCH HOT
NEUTRAL
LOAD
CONTROL
NEUTRAL
Dual Feed Wiring The Input control circuit and the Output load circuit can be supplied by two circuit breakers on a single phase or by two separate phases.
120V Mark X™ Type Dimmer
D3206/08 Controller/Dimmer OR
Load
Line Load
Green Ground INPUT
Green Ground
OUTPUT
LOAD
Hot (Black) Line 2 (277VAC)
Black 277V MARK X™ DIMMABLE BALLAST White
Neutral 2 (White)
Wiring Diagram 3B 277V Dual Feed Wiring Application w/Hi-lume® Ballast Used if Dimmer/Switch has Neutral connection (
Hot (Black) Line 1 (120VAC)
)
(Load)
Neutral 1 (White)
Power Extender
HOT
Neutral
Neutral Line
SWITCH HOT
LOAD
NEUTRAL
CONTROL
NEUTRAL
Single Feed Wiring Line Hot can be controlled by one circuit breaker as long as the total load does not exceed the rating of the circuit breaker.
120V Mark X™ Type Dimmer
D3206/08 Controller/Dimmer OR
Line Load
Load Green Ground
INPUT
Green Ground
OUTPUT
LOAD
Hot (Black) Line 2 (277VAC)
Orange 277V Hi-lume® Black BALLAST White
Neutral 2 (White)
Wiring Diagram 4 Dual Feed Wiring Application w/Controller and Two Power Extenders (277V depicted)
Hot (Black) Line (120VAC)
(Load)
(Load)
D3206/08 Controller/Dimmer
Power Extender
HOT
SWITCH HOT
LOAD
CONTROL
NEUTRAL
NEUTRAL
SWITCH HOT
HOT
LOAD
CONTROL
NEUTRAL
NEUTRAL
Neutral (White)
Neutral Line Load Green Ground
Power Extender
LOAD 1
Hot (Black) Line 1 (277VAC)
277V MARK X™ DIMMABLE BALLAST
Neutral (White)
LOAD 2 Hot (Black)
277V MARK X™ DIMMABLE BALLAST
Line 2 (277VAC) Neutral (White)
Dual Feed Wiring The Input control circuit and the Output load circuit can be supplied by two circuit breakers on a single phase or by two separate phases. Note: Up to 4 Power Extenders can be connected together.
Leviton Mfg. Co., Inc. 59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
Visit our Website at: www.leviton.com
© Copyright 2003 Leviton Manufacturing Co., Inc. All rights reserved.
3
PE200 MOUNTING All Power Extenders must have 4-1/2" spacing above and below each unit for proper ventilation and heat dissipation (refer to figure 3). Line voltage wiring should be at least 6ft away from sound or electronic equipment wiring. Mount Power Extender to wall box with “TOP” facing up as follows: For Wall Box Mounting (refer to figure 1), for Flush Mounting (refer to figure 2) and for Panel Mounting (not shown), proceed as follows: a. The enclosure must be in accordance with all local and national electrical codes. b. Leviton DOES NOT recommend using a door to enclose the front of a panel, since this restricts airflow to the controls. c. If mounting multiple controls in an enclosure: • Ambient timperature within an enclosure “MUST REMAIN BETWEEN”32 o-104o F (0 o-40 oC). • If not mounting in a metal enclosure, all units “MUST” be mounted in a wall box. d. To improve heat dissipation of controls, remove the faceplate from the unit.
Figure 3: Front View Spacing 1900 Box TOP
2 Gang Raised Cover Raised Cover Mounting Screws (4 Places)
TOP
4-1/2" (11.4 cm) Minimum
Power Extender Power Extender Wallplate
Figure 1: Surface Mounting
TOP
1900 Box 2 Gang Raised Cover Raised Cover Mounting Screws (4 Places)
4-1/2" (11.4 cm) Minimum
TOP
Power Extender
Figure 2: Flush Mounting
Power Extender Wallplate
SPECIFICATION SUBMITTAL JOB NAME:
CATALOG NUMBERS:
JOB NUMBER:
4
Leviton Mfg. Co., Inc. 59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
Visit our Website at: www.leviton.com
© Copyright 2003 Leviton Manufacturing Co., Inc. All rights reseved. G-6723A/G3
PE400-1
Product Specifications
PE400-1 Power Extender APPLICATION
FEATURES & BENEFITS • Works with electronic low voltage and incandescent • Emulates the characteristics of the dimmer that it is connected to in terms of dimming range and resolution • Works with any Dimensions Multi-zone Controller/Dimmer to extend load capacity for electronic low voltage loads on any zone 2.06
MOUNTING
4.50
2.80
4.72
All Power Extenders must have 4-1/2" spacing above and below each unit for proper ventilation and heat dissipation (refer to figure 3). Line voltage wiring should be at least 6ft away from sound or electronic equipment wiring. Mount Power Extender to wall box with “TOP” facing up as follows: For Wall Box Mounting (refer to figure 1), for Flush Mounting (refer to figure 2) and for Panel Mounting (not shown), proceed as follows: a. The enclosure must be in accordance with all local and national electrical codes.
Figure 3: Front View Spacing 1900 Box
b. Leviton DOES NOT recommend using a door to enclose the front of a panel, since this restricts airflow to the controls. c. If mounting multiple controls in an enclosure: • Ambient timperature within an enclosure “MUST REMAIN BETWEEN”32 o-104o F (0 o-40 oC).
2 Gang Raised Cover Raised Cover Mounting Screws (4 Places)
TOP
4-1/2" (11.4 cm) Minimum
Power Extender Power Extender Wallplate
Figure 1: Surface Mounting
• If not mounting in a metal enclosure, all units “MUST” be mounted in a wall box. d. To improve heat dissipation of controls, remove the faceplate from the unit.
1900 Box 2 Gang Raised Cover Raised Cover Mounting Screws (4 Places)
4-1/2" (11.4 cm) Minimum
TOP
Power Extender
Figure 2: Flush Mounting
Power Extender Wallplate
Leviton Mfg. Co., Inc. 59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
Visit our Website at: www.leviton.com
PE400-1 Power Extender
Leviton’s PE400-1 Power Extender allows a dimmers power handling capacity to be extended to a full 1000W/VA on 120V input power. It allows a dimmer to dim or switch a fully loaded circuit of electronic low voltage and incandescent loads only.
PE400-1 .........................
Product Specifications SPECIFICATIONS
Wiring Diagram 1: Single Feed Wiring Application
Compatibility Used if Dimmer/Switch has Neutral connection ( Hot (Black) (120VAC)
)
(Load)
Neutral Line
SWITCH HOT
LOAD
HOT
CONTROL
NEUTRAL
• For dimmers that include a Neutral wire (such as some scene-capable dimmers), the dimmer Neutral wire must be connected
Neutral
OR
Line Load
Load Green Ground
Power Extender
INPUT
Green Ground
OUTPUT
• For Architectural Systems: Works with all families • Compatible with all new Dimensions Multizone controllers
Dimmer
D3206/08 Controller/Dimmer
• For Monet™ installations, use a 120V, 600VA Monet Magnetic Low Voltage dimmer (requires a Neutral wire)
NEUTRAL
• For Box-Mounted Dimmers: Must use a 120V, 600W Incandescent version from the following families: IllumaTech™, Mural™, True Touch™, SureSilde™, TouchPoint™ and Home Controls
LOAD Black
ELECTRONIC LOW-VOLTAGE BALLAST White
Neutral (White)
Electrical Input Voltage: 120V, 50/60Hz
Wiring Diagram 2: Dual Feed Wiring Application
Load Rating: 1000W/VA Load Output Power: Phase independent of control device Dimmer Input: 120V 50/60Hz Testing/Code Compliance: UL Listed, CSA Certified and FCC Part 15
Used if Dimmer/Switch has Neutral connection ( Hot (Black) Line 1 (120VAC)
)
(Load)
Neutral 1 (White)
Environmental Operating Temperature Range: 0ºC to 40ºC
HOT
LOAD
Neutral Line
SWITCH HOT
NEUTRAL
CONTROL
NEUTRAL
Color: Aluminum clear anodized extruded heat sink with a snap-on molded white cover
OR
Load
Neutral Line Load
Green Ground
Power Extender
Size: 4.72"L x 4.5"W x 0.5"H (120mm x 114mm x 12.7mm)
Dimmer
D3206/08 Controller/Dimmer
Physical
INPUT
Green Ground
OUTPUT
LOAD
Hot (Black) Line 2 (120VAC)
Black
Neutral 2 (White)
White
ELECTRONIC LOW-VOLTAGE BALLAST
Storage Temperature Range: -10ºC to 85ºC Relative Humidity: 20%-90% non-condensing
Wiring Diagram 3: Dual Feed Wiring Application w/Controller and Two Power Extenders
Warranty: Limited 2-Year Warranty
Hot (Black) Line (120VAC)
(Load)
(Load)
D3206/08 Controller/Dimmer
Power Extender
Hot (Black) Line 1 (120VAC)
LOAD
SWITCH HOT
HOT
NEUTRAL
CONTROL
NEUTRAL
SWITCH HOT
HOT
LOAD
CONTROL
NEUTRAL
Power Extender
NEUTRAL
Neutral (White)
Neutral Line Load Green Ground
LOAD 1 Black
Neutral (White)
ELECTRONIC LOW-VOLTAGE BALLAST White
Hot (Black)
Black
LOAD 2 Line 2 (120VAC) Neutral (White)
Leviton Mfg. Co., Inc. 59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
Visit our Website at: www.leviton.com © Copyright 2003 Leviton Manufacturing Co., Inc. All rights reseved. G-6836/A4-tp
ELECTRONIC LOW-VOLTAGE BALLAST White
PRODUCT SPECIFICATIONS
Timer Switches for Energy Management
LTB30-1L
LTT60-1L
Better than ever – Leviton Decora Timer Switches offer advanced features, superior accuracy and contemporary aesthetics. Our robust selection provides convenient timed control of lighting and motor loads in homes, offices, schools, hotel rooms and other small commercial applications. An easy upgrade, automatic timers help reduce energy costs, improve security and add convenience. Homeowners can set lights to turn on and off for a lived-in look while they are away, or automate control of heat lamps, pool pumps or bathroom fans. Our versatile selection includes fully programmable and preset timers in popular styles and colors. All are backed by Leviton’s long history of quality and reliability.
APPLICATIONS n Residential/commercial indoor, outdoor and holiday lighting n Ventilation, exhaust, attic and ceiling fans n Heaters, heat lamps, pool filters and hot tubs
FEATURES AND BENEFITS n Single pole or 3-way applications (most models) n Replaces a standard wall switch (neutral required
for select models)
6651
6652
New 5-Button Decora Timer Switches (neutral required) For lighting, heat lamps, hot tubs, attic and exhaust fans n Improved 15-, 30-, or 60-minute timers, plus 12- and new 2-hour options n Four preset buttons and OFF n Simple press and hold override timer function n Flexibility to program timer to convert to any other timer interval n Color/Timer change kits available n Three colors in one box
New 5-Button Decora Timer Switches For incandescent indoor and outdoor lighting n 30- or 60-minute timers n Four present buttons and OFF n Simple press and hold override timer function 14-Hour Programmable Timer Switch For residential incandescent indoor/outdoor and seasonal lighting n Automatic and manual ON/OFF control option n 14 hour program capability in 1 hour increments n Program repeats daily
n Soothing green LEDs
n Battery backup protects memory in event of power outage
n Coordinates with Decora screwless wallplates
Countdown Timer Switch For residential/light commercial indoor/outdoor lighting, office lights and ceiling fans n Simple rotary dial time selection of settings, from 1 minute to 18 hours n Automatic and manual ON/OFF control option n Illuminated LED indicates load is ON n Blinking LED accompanied by annunciator sound indicates end of time cycle
New Vizia + 24-Hour Programmable Timer Switch For indoor/outdoor lighting, fans and pool filters n Easy to program and operate n Timer settings at a glance with large, back-lit display n Flexibility to program all days, weekdays, weekends or any combination of days n Astronomical clock automatically adjusts to local sunrise/sunset times n Automatic daylight savings time option n Rechargeable battery keeps time during temporary power outages n Three colors in one box n Color change kits available ®
SPECIFICATIONS
Operating Temperatures 0˚ C to 40˚ C
Leviton Mfg. Co., Inc. 201 North Service Road Melville, NY 11747 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com © 2009 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Decora® Timer Switches for Energy Management
VPT24-1P
AGENCY STANDARDS AND COMPLIANCE
WARRANTY INFORMATION
n
n Limited Five-Year Warranty
n CSA Certified (File #152105) n UL Listed VPT24, LTBxx Series and LTTxx Series (File #E-328809) n UL Listed 6651 and 6652 (File #E-148771)
DIMENSIONAL DRAWINGS VPT24-1P
LTBxx-1L Series
1.40 (35.6)
1.75 (44.5)
1.40 (35.6)
1.75 (44.5)
2.751
1.652 0.255
4.13 (104.9)
4.13 (104.9)
2.71 (68.8)
4.500
3.812
2.72 (69.1)
0.19 (4.9)
.038 (9.7)
Line VAC, 60Hz
1.73 (44.0)
6651/6652 1.35 (34.2)
0.23 (5.8)
1.19 (30.2)
2.76 (70.1)
2.70 (68.6)
4.13 (104.9)
0.25 (6.4)
4.13 (104.9)
Decora® Timer Switches for Energy Management
LTTxx-1L Series 1.74 (44.2)
*6651 Shown
WIRING DIAGRAMS Vizia + Programmable Timer Switch
VPT24-1P
Single Pole Wiring Application WH
BK
Hot (Black)
WH
Black
Green Ground
White
(unused)
BK
WH
YL
Green Ground
Line 120VAC, 60Hz
Load
BK
Black
YL/RD RD
Timer Sw
Coordinating Remote Switch (no LED)
Timer Switch
Load
Use lead for 3-Way or more applications only. For single pole applications, do not remove the insulating label.
RD
YL/RD
(unused)
RD
White
Gree Grou
Neutral (White)
VPT24-1P
3-Way Wiring with Coordinating Remote Switch, VP0SR-10 (no LED) Application Timer Switch Coordinating Remote Switch Timer (no LED) Switch Coordinating Remote Switch (no LED)
N
VPT24-1P
3-Way Wiring with Matching Remote Switch, VP0SR-1L (w/LED) Application Matching Remote Switch Timer (w/LED)Switch Timer Switch Matching Remote Switch (w/LED)
Hot (Black) Hot (Black)
ck)
WH Black
Black
WH BK
(unused) Green Ground
Load
e le
l.
Complies with FCC Part 15, Class B
White
Load RD
(unused)
RD YL/RD
(unused)
White
te)
BK WH
(unused) Green Ground
YL/RD RD
WH BK
BK
YL/RD
YL/RD
RD
Green Ground
Line Line 120VAC, 60Hz120VAC, 60Hz
(Black) Hot (Black) Hot WH
Green Ground
Line Line 120VAC, 60Hz120VAC, 60Hz
Green Ground
Neutral (White) Neutral (White)
YL/RD
WH BK Green Ground
YL/RD RD
WH BK Green Ground
RD YL/RD
BK
Black Green Ground
YL/RD
Load
White Neutral (White) Neutral (White)
Leviton Mfg. Co., Inc. 201 North Service Road Melville, NY 11747 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com © 2009 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
WH BK
Black Load White
WIRING DIAGRAMS
5-Button Timer Switches
LTBxx Series
Single Pole Wiring Application Timer Switch White
Coordinating Remote Switch (no LED)
Black
WH
Hot (Black)
Green Ground
BK
Green Ground
Yellow/Red
Black
RD
Insulating Label
Line 120 VAC, 60Hz
BK
Hot (Black)
Green Ground
RD
YL/RD
(unused)
Load
Load
WH
(unused)
Black
Red
Timer Switch
YL/RD
Line 120VAC, 6
White
White
Neutral (White
Neutral (White)
LTBxx Series
LTBxx Series
3-Way Wiring with Coordinating Remote Switch, VP0SR-10 (no LED) Application
3-Way Wiring with Matching Remote Switch, VP0SR-1L (w/LED) Application
Coordinating Remote Switch (no LED) Timer Switch Coordinating Remote Switch (no LED) Timer Switch WH Black
Line ine VAC, 60Hz 120 AC, 60Hz
BK
BK
(unused)WH (unused) Green Green Ground Ground
Black RD
Load White
WH
YL/RD RD YL/RD
RD(unused) Load(unused)
WH
RD
BK
Matching Remote Switch (with LED) Timer Switch Matching Remote Switch (with LED) Timer Switch
BK Hot (Black) Hot (Black)
Hot (Black) Hot (Black) WH
Green Green Ground Ground
WH
YL/RD Line YL/RD Line 120VAC, 60Hz 120VAC, 60Hz
Green Ground
Line Line 120VAC, 60Hz 120VAC, 60Hz
WH
BK
BK
YL/RD
WH
BK
Green Ground
Green Ground
YL/RD
RD
BK
RD
YL/RD
Green Ground
Black
YL/RD
Load
White
Load
White
Neutral (White) Neutral (White)
White)
Black
White
Neutral (White) Neutral (White)
LTTxx Series
Single Pole Wiring Application
Timer Hot (Black)
Black
Black Black
Line 120VAC 60Hz
Load
Green Ground
White Neutral (White)
6651/6652 3-Way Wiring with a 3-Way Switch
Single Pole Wiring Application
Timer Switch
Timer Switch
Blue
Hot (Black)
Blue
Black
Hot (Black)
Black
Line 120V AC 60 Hz
Yellow
Load
Black OFF
Yellow
Green Ground
Switch
Common Terminal Load
Line 120V AC 60 Hz
White
Green Ground
Green Ground White
Neutral (White) Neutral (White)
Leviton Mfg. Co., Inc. 201 North Service Road Melville, NY 11747 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com © 2009 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Decora® Timer Switches for Energy Management
Black)
DERATING/MAXIMUM CAPACITY
In multi-gang installations, all devices must be derated in accordance with the following chart: Cat No.
Single Gang
Double Gang
Triple Gang or More
VPT24-1P
No derating required
No derating required
No derating required
6651
No derating required
No derating required
No derating required
6652
No derating required
No derating required
No derating required
LTBxx Series
Resistive: 20A (2400W) Incandescent: 1800W Inductive: 20A, Motor: 1HP
Resistive: 16A (1920W) Incandescent: 1800W Inductive: 16A, Motor: 1HP
Resistive: 16A (1920W) Incandescent: 1800W Inductive: 16A, Motor: 1HP
LTTxx Series
600W
500W
400W
Decora® Timer Switches for Energy Management
ORDERING INFORMATION Decora® Timer Switches - Programmable Electronic Timer Switches, Single Pole or 3-Way Cat. No.
Description
Rating
Color*
VPT24-1L
Vizia +® 24 Hour, with astronomical clock; neutral required
1800W Incandescent, 15A Resistive/ Inductive, 1 HP @ 120VAC
Z
6651
14 hour programmable in 1 hour intervals
500W Incandescent @ 120VAC
W, I
6652
Variable countdown, 1 minute to 18 hour intervals, neutral required
500W Incandescent, 500VA Rapid Start Ballasts only 1/6 HP 120VAC 60 Hz
W, I, A
5-Button Timer Switches - Four Preset Buttons and OFF Single Pole or 3-Way, Neutral Required, 1800W Incandescent, 20A Resistive/Inductive, 1 HP @ 120VAC Cat. No.
Description
Interval
Color*
LTB15-1L
15 minute
2-5-10-15 minutes
Z
LTB30-1L
30 minute
5-10-15-30 minutes
Z
LTB60-1L
60 minute
10-20-30-60 minutes
Z
LTB02-1L
2 hour, Title 24 Compliant
15M-30M-1H-2 hours
Z
LTB12-1L
12 hour
2-4-8-12 hours
Z
Single Pole, Neutral Not Required, 600W Incandescent, 5A Resistive Cat. No.
Description
Interval
Color*
LTT30
30 minute
5-10-15-30 minutes
I, W, T
LTT60
60 minute
10-20-30-60 minutes
I, W, T
Color Change Kits Cat. No.
Description
Color*
VPTKT
Vizia + 24 Hour Timer Color Change Kit
W, I, T, G, E, B
LTBKT
5-Button Timer Color Change Kit
W, I, T, E, B
*To order colors, add suffix to basic Cat. No. White (-W), Ivory (-I), Light Almond (-T). Products with suffix –Z are packaged 3 colors in a box: White, Ivory and Light Almond. Color Change Kits in White (-W), Ivory (-I), Light Almond (-T), Gray (-G), Black (-E), Brown (-B).
Leviton Manufacturing Co., Inc. 201 North Service Road, Melville, NY 11747-3138 Telephone: 1-800-323-8920 • Fax: 1-800-832-9538 • Tech Line: (8:30AM-7:00PM E.T. Monday-Friday): 1-800-824-3005
Leviton Manufacturing of Canada, Ltd. 165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • Fax: 1-800-563-1853
Leviton S. de R.L. de C.V. Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • Fax. (+52) 5386-1797 • www.leviton.com.mx Decora and Vizia + are registered trademarks of Leviton Manufacturing Co., Inc.
Visit our website at www.leviton.com © 2009 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-8264/L09-sw
product data
Self-Contained PIR Ceiling Mount Occupancy Sensor
BASIC OPERATION The ODC0S-I uses passive infrared (PIR) detection technology to monitor a room for occupancy through a segmented Fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches its lighting loads ON. The lights will remain ON as long as there is an occupant moving through the sensor zones. APPLICATIONS Leviton’s Self-Contained Passive Infrared Ceiling Occupancy Sensor is the cost-effective choice for commercial and institutional installations, where installation of the recessed ceiling unit is difficult, inconvenient or costly. Available in 120V, 220V and 277V versions, the ODC0S-I is ideal for: • Storage areas • Small bathrooms • Retrofit • Copy rooms • Mop/sink closets • Small spaces without wall switches. The Self-Contained Ceiling Sensor does not require an external control unit for power or switching the load ON and OFF.
FEATURES • Sensor and switching relay in one unit—reduces labor and need for additional materials. • 360° field-of-view with approximately 530 sq. ft. of coverage when mounted at 8 ft. This reduces the number of additional sensors typically required in many spaces. • Adjustable Delayed-OFF time setting between 20 seconds and 15 minutes allows custom adjustment for maximum savings. • Light Sensor - an ambient light override option can be set between 2 and 500+ foot candles and full brightness to prevent the sensor from switching lights ON when ample natural sunlight is available. Hold-OFF feature. • Segmented Fresnel lens contains 79 segments for optimum sensitivity and detection performance. • A standard A/C toggle switch may be used to provide manual-OFF override so that lights may be switched OFF. • Red LED indicator light flashes when sensor detects motion, to verify power placement and function of sensor at installation.
Leviton Mfg. Co., Inc. Lighting Management Systems 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/lms © 2010 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
ODC0S-I1 • ODC0S-I7 • ODC0S-I2
ODC0S-I
product data INSTALLATION The ideal location for the Self-Contained Occupancy Sensor unit is in a ceiling area that provides a full view of the space with an unobstructed path to the entrance way(s), but out of line from hallway traffic. The sensor should be positioned at least 6 feet from HVAC registers to prevent false triggering. The ODC0S-I may be mounted directly to a three or fourinch octagon box. The sensor wires directly to the lighting fixtures. An ODCCG protective cage is recommended to guard against accidental breakage.
-I1W
ODC0S-I1 • ODC0S-I7 • ODC0S-I2
-I2W
-I7W
Line Voltage
120V
220V
277V
Power Consumption
1.45W
1.31W
1.89W
Operational Frequency
60Hz
50Hz
60Hz
Load Rating Incandescent
1000W
1000W
1000W
Load Rating Fluorescent
1000VA
500VA
2700VA
Wire Designation
TOP VIEW 13
0
13
SPECIFICATiONS Electrical
Field of View (in feet) FIELD-OF-VIEW
ODC0S-I Field-of-View (in feet)
SIDE VIEW 8
0 13
7
3
0
3
7
13
DIMENSIONAL DIAGRAM ODC0S
Line - black, Neutral - white, Load - blue
Environmental Operating Temperature
32°F - 122°F (0°C - 50°C)
Storage Temperature
14°F - 185°F (-10°C - 85°C)
Relative Humidity
20-90% Non-condensing
OTHER Listings
UL Listed and CSA Certified, Complies with CEC Title 24, Complies with FCC Regulations
Warranty
WIRING DIAGRAMS
Limited Five-Year Warranty
ORDERING INFORMATION Cat. NO.
Description
ODC0S-I1 ODC0S-I2 ODC0S-I7
Self-Contained Ceiling Mounted Occupancy Sensor & Switching Relay
ODCCG
Protective Cage
* To indicate color, add suffix to the end of hte catalog number. White (-W) ODC0S-I1 Wiring Diagram with optional switch for override to OFF * Same wiring for all voltages.
leviton specification submittal JOB NAME: JOB NUMBER:
CATALOG NUMBERS:
Leviton Manufacturing Co., Inc. Lighting Management Systems
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/lms
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/lms © 2010 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-8334/I10-ak REV SEP 2010
PRODUCT DATA
OSFHU Passive Infrared Fixture Mount High Bay Occupancy Sensor
BASIC OPERATION Passive Infrared Technology (PIR) is used to sense occupancy by comparing the infrared energy from an object in motion and the background space. PIR sensors minimize false ON from background environmental conditions such as air movement to provide reliable detection of lineof-sight motion. The OSFHU high-bay occupancy sensor is specifically designed for high mounted areas such as warehouses, manufacturing and other high ceiling applications. The OSFHU installs directly to an industrial fluorescent luminaire or an electrical junction box. It is a self-contained sensor and relay that turns individual light fixtures ON or OFF based on occupancy in the detection zone. It comes with three interchangeable lenses for use in either a 360° high-bay or 360° low-bay general area or an aisle way. The OSFHU provides reliable coverage up to 40 ft. mounting heights. The OSFHU is also available in a model for cold storage applications with temperatures as low as -40° F.
To improve the field-of-view for deep body fixtures, a separate offset adapter accessory (OSFLO or OSFOA) can be used to position the sensor below the fixture body. The adapter simply snaps into a 1/2” knockout on the end of the industrial fixture to attach the sensor. The OSFHU and OSFLO/OSFOA provides the most labor savings available with quick snap, 42” wire leads, and no power required to configure. INSTALLATION The OSFHU mounts directly to an industrial fluorescent fixture or an electrical junction box through a standard 1/2” knockout using the provided lock-nut. Wiring is connected inside the fixture body. For deep body fixtures, the OSFLO or OSFOA accessory installs into the fixture 1/2” knockout using the provided lock-nut. The OSFHU sensor is installed in one of three, 1/2” punch-outs positioning the OSFHU at the correct field-of-view position flush or below the fixture reflector assembly. When applicable, wiring is routed through the OSFLO or OSFOA to the fixture body for wiring.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les © 2012 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSFHU
OSFHU
PRODUCT DATA FEATURES Quicksnap: built into the 1/2” nipple, this locking mechanism allows for the fastest and easiest mounting not requiring a threaded lock-nut Reduce time and materials: easily reach the ballast at either end of the fixture without requiring more wire or connectors with the included 42” wire leads Fast, easy time delay setting: can be set at any time without requiring power to the sensor; time delay is variable from 30s-20m Instantly verify fixture operation and wiring connections: “instant ON” closing relay fires lamps in under 5 seconds High Inrush Stability (H.I.S. Technology): - Zero crossing circuitry optimizes relay operation for reliable, long-life operation - Robust mechanical latching relay is durable for all load types Auto temperature calibration: automatically adjusts the PIR sensitivity as ambient temperature rises to increase detection of heat movement through the field-of-view
OSFHU
Return to last state: for safety and energy savings, the OSFHU contains a latching relay so that in the event power is lost to the device, the device will return to the last known state of the relay False detection intelligence: for increased energy savings and to mitigate nuisance tripping, the super bright LED indicates advanced detection has been activated and the lights will only turn ON when true occupancy has been determined
FIELD-OF-VIEW
9.1m (30 ft)
High Bay 360˚ Top View
Side View
9.1m (30 ft)
6.1m (20 ft)
Aisle Top View
3m (10 ft)
9.1m (30 ft)
6.1m (20 ft)
Low Bay 360˚ Top View
3m (10 ft)
0
0
3m (10 ft)
3m (10 ft)
6.1m (20 ft)
6.1m (20 ft)
9.1m (30 ft)
9.1m (30 ft)
0
0
Side View
6.1m (20 ft)
6.1m (20 ft) 9.1m (30 ft)
12.2m (40 ft)
12.2m (40 ft) 3m 9.1m 6.1m (30 ft) (20 ft) (10 ft)
0
3m 6.1m 9.1m (10 ft) (20 ft) (30 ft)
Hot (Black)
3.0m (10 ft) 0 3.0m (10 ft) 6.1m (20 ft)
OSFOA
9.1m (30 ft)
6.1m (20 ft)
9.1m (30 ft) 0 S H E L V E S
S H E L V E S
Side View
6.1m (20 ft)
OSFHU 3m Wiring Diagram 0 3m 6.1m 9.1m 9.1m 6.1m
(30 ft) (20 ft) (10 ft)
2.4m (8 ft)
7.6m (25 ft)
9.1m 6.1m 3.0m (30 ft) (20 ft) (10 ft
(10 ft) (20 ft) (30 ft)
Black Line 9.1m (30 ft) 120-277-347 VAC 50/60Hz 6.1m (20 ft)
9.1m (30 ft)
Low Bay 360˚ Top View
3m (10 ft) 0
9.1m (30 ft)
9.1m (30 ft)
0
0
S H E L V E S
S H E L V E S
OSFHU (480V) Wiring Diagram
Side View
2.4m (8 ft)
6.1m (20 ft)
12.2m (40 ft)
7.6m (25 ft) 3m 9.1m 6.1m (30 ft) (20 ft) (10 ft)
3m 6.1m 9.1m (10 ft) (20 ft) (30 ft)
White
3.0m (10 ft) 6.1m (20 ft)
6.1m (20 ft)
0
3m 6.1m 9.1m (10 ft) (20 ft) (30 ft)
240/480V 50/60Hz
9.1m 6.1m 3.0m (30 ft) (20 ft) (10 ft)
0
3.0m 6.1m 9.1m (10 ft) (20 ft) (30 ft)
9.1m (30 ft)
Low Bay 360˚ Top View
6.1m (20 ft)
Sheet Metal* Punch Dimensions for Optional Snap-In Installation
3.0m (10 ft) 0 3.0m (10 ft) 6.1m (20 ft) 9.1m (30 ft) 0
S H E L V E S
Side View
2.4m (8 ft)
6.1m (20 ft) 7.6m (25 ft)
3m 6.1m 9.1m (10 ft) (20 ft) (30 ft)
Load
0
6.1m (20 ft)
9.1m (30 ft)
White
Sensor
Neutral (White)
3m (10 ft)
Side View
3.0m (10 ft)
Black
9.1m 6.1m 3.0m (30 ft) (20 ft) (10 ft)
0
3.0m 6.1m 9.1m (10 ft) (20 ft) (30 ft)
*18-22 Gauge Steel
Leviton Mfg. Co., Inc. Lighting & Energy Solutions 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les © 2012 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSFHU
Aisle Top View
6.1m (20 ft)
Red
PRODUCT DATA SPECIFICATIONS ELECTRICAL Input Voltage
120-230-277-347VAC; 240/480VAC (-I4W models)
Operational Frequencies
50/60Hz
Load Rating
800VA @ 120VAC Ballast 1200VA @ 277VAC Ballast 1500VA @ 347VAC Ballast 2000VA @ 480VAC Ballast Motor: 1/4 HP Load @ 120V
Standby Power Consumption
120V – 130mW – .13W 277V – 450mW – .45W 347V – 460mW – .46W
Time Delay
30 seconds-20 minutes (factory set to 30 sec – no power required to set)
Wire Designation
-ITW/-CTW models: Line-Black, Load-Red, Neutral-White -I4W/-C4W models: Line-Black, Load-Red, Load-Red
ENVIRONMENTAL Operating Temperature Range
14° F to 160° F (-10° C to 71° C)
Cold Storage Operating Temperature Range
-40° F to 160° F (-40° C to 71° C)
Storage Temperature Range
-14° F to 160° F (-25° C to 71° C)
Relative Humidity
20% to 90% non-condensing
OSFHU
PHYSICAL Dimensions
OSFHU: 3.50” H x 3.50” W x 1.25” D OSFOA: 5.50” H x 2.00” W x 2.00” D OSFLO: 4.325” H x 2.00” W x 2.00” D
Construction
High-impact, injection molded plastic housing
Color
White
OTHER Agency Listings
UL and CUL Listed (OSFHU models)
Warranty
Limited 5-Year
ORDERING INFORMATION CAT. NO.
DESCRIPTION
OSFHU-ITW
PIR Fixture Mount High Bay Sensor with 3 Interchangeable Lenses, White
OSFHU-CTW
PIR Fixture Mount High Bay Sensor with 3 Interchangeable Lenses for Cold Storage, White
OSFHU-I4W
PIR Fixture Mount High Bay Sensor with 3 Interchangeable Lenses, 480V, No Neutral, White
OSFHU-C4W
PIR Fixture Mount High Bay Sensor with 3 Interchangeable Lenses for Cold Storage, 480V, No Neutral, White
OSFOA-00W
Offset Adapter Accessory for OSFHU, 3 Position, White
OSFLO -00W
Offset Adapter Accessory for OSFHU, 1 Position, White
OSFCG -00W
Protective Cage for Fixture Mounted Sensors
NAFTA and Made in USA models available.
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les © 2012 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-7366G/A12-tb REV JAN 2012
G-6987A ODC04-I rev
2/17/05
10:57 AM
Page 1
OSC04-IOW OSC15-IOW
Occupancy Sensor Infrared Ceiling Sensor The all-digital & microprocessor based OSCxx-I is the most advanced infrared ceiling sensor available. Self-calibrating sensitivity and timer allow the installer to “install & forget.” THE OSCXX-I OCCUPANCY DETECTOR • PASSIVE INFRARED TECHNOLOGY (PIR) • SIMPLE, FAST INSTALLATION • SELF-ADJUSTING • DIGITAL TECHNOLOGY, COMPLETE RELIABILITY • PHOTOCELL CONTROL • IMMUNITY TO AIR CURRENTS GENERAL OPERATION The OSCxx-IOW Infrared Ceiling Sensor is a low voltage occupancy detector that works in conjunction with the Leviton OSPxx power pack to control lighting. The detector’s main function is to turn the lights on or maintain the lights on while movement is detected within the sensor’s range and to turn the lights off when the space is left unoccupied. The sensor uses a small semiconductor heat detector that resides behind a multi-zone optical lens. This Fresnel lens establishes dozens of zones of detection. The sensor is sensitive to the heat emitted by the human body. In order to trigger the sensor, the source of heat must move from one zone of sensing to another. Non-moving hot objects will not cause the lights to turn on.
Small Size: Installed sensor appears almost invisible. Fast, Simple Installation: Easy ceiling mount, three wire connection (low voltage) and twist-lock sensor attachment. Self-Adapting: An internal microprocessor continually analyzes, evaluates and adjusts settings. Performance is kept at a maximum and user complaints are eliminated. Maximum Reliability, Low Cost: All digital circuitry uses a minimum of components. Timer Setting: Automatic - 30s to 30 min. Manual and Automatic. Test mode - 6 sec. Ambient Light Recognition: A photocell prevents lights from turning on when the room is adequately lit by natural light. Non-Volatile Memory: Learned and adjusted settings saved in protected memory are not lost during power outages.
HOW THE ODC04-I AUTOMATICALLY ADAPTS Condition Timer Left In Test Mode - The sensor remains in an 6 sec. test mode.
Example An installer accidentally leaves the sensor in the 6 sec. timer test mode and the lights may go off or on every 6 sec.
Adaptive Reaction The sensor automatically resets the timer to 10 min after . 15 .min of test mode.
False-On -The sensor incorrectly turns the lights on.
The sensor detects movement in the corridor or hallway and the room lights turn on.
After an initial movement is sensed, if another movement is not sensed within the timer setting then the delayed off time setting is automatically reduced.
False-Off -The sensor incorrectly turns the lights off.
The sensor does not detect movement because an occupant sits virtually motionless at a desk and the lights turn off.
If motion is sensed within a short period after the lights go off, then the current delayed off-time setting is increased.
A dedicated internal microprocessor continually analyzes the room environment and adjusts itself automatically. The internal timer and infrared sensitivity are automatically adjusted. Once installed, the OSCxx does not require manual adjustment or calibration.
OSC04-IOW OSC15-IOW
At a distance close to the sensor, slight movement can be sensed. As the distance away from the sensed increases, the space between the zones of sensitivity increases, and therefore the amount of motion required to trigger the sensor increases.
FEATURES
SPECIFICATION SUBMITTAL JOB NAME:
CATALOG NUMBERS:
JOB NUMBER:
Leviton Mfg. Co., Inc. 59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
Visit our Website at: www.leviton.com
1
G-6987A ODC04-I rev
2/17/05
10:57 AM
Page 2
Product Specifications
OSC04-IOW OSC15-IOW .........................
PRODUCT SPECIFICATIONS
RANGES OSC15
Models Part Number OSC04-IOW OSC15-IOW
Lens Type
Coverage
Additional Features
High Density Extended Range
450 sq. ft. 1500 sq. ft
Photocell Photocell
TOP VIEW 20
10
CONTROLS PIR (Infrared Sensitivity): High to low. Timer Adjustment (Manual): 30s - 30 min. - Factory set 10 min. PC (Photocell Adjustment): 20 to 3,000 Lux - Factory set 3,000 Lux (Disable photocell)
0
10
DIP switch settings Switch A1 A2 A3 A4 B1 B2 B3 B4
Switch Functions Bank A N/A N/A Manual Mode Walk-Thru Disable Bank B Override to On Override to Off Test Mode LED Disable
OFF — — Auto Adapting Enabled Walk-Thru Enabled Auto Mode Auto Mode OFF¡ON¡OFF LEDS Enabled
Field of View (in feet)
20
Switch Settings ON — — Auto Adapting Disabled Walk-Thru Disabled
SIDE VIEW 8
0 20
15
3 5.6
20
15
9 11
Field of View (in feet)
OSC04
Lights forced On Lights forced Off Enter/Exit Test Mode LEDS Disabled
0
5.6 3
11 9
TOP VIEW
12
5
INDICATOR Red LED Lamp: Infrared motion.
0
SPECIFICATIONS Construction: Housing -- Rugged, high-impact, injection molded plastic. Color coded leads are 6” long (16.24 cm). Size & Weight: 4.5” dia., 1.5” height; 5 oz. (114 mm dia., 38 mm height; 142 g). Power Requirements: 24 VDC, 20mA from the OSPxx-series power pack. Output: 24 VDC active high logic control signal with short circuit protection. Operating Environment: 32°F to 104°F (0°C to 40°C); 0% to 95% relative humidity, non-condensing. For indoor use only. Warranty: 5 yrs.
5
12
Major Motion, IR
9
12
7
5
3
0
OSPxx Series Power Pack
Black Blue
(control)
Red Black Blue* (occupancy)
Red Black Blue
12
Neutral (White) CATALOG NUMBERS:
JOB NUMBER:
Leviton Mfg. Co., Inc. 59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538 G-6987A/C4-tp
Blue* (occupancy) Gray* (photocell + occupancy)
Load White
White
Blue Black
VAC60Hz
Visit our Website at: www.leviton.com
9
Black
Hot Black Line 120/277/347
2
7
NC-Brown Common-Green NO-Brown/White To HVAC System
Gray*
JOB NAME:
5
Sensor
(photocell + occupancy)
SPECIFICATION SUBMITTAL
3
PHYSICAL WIRING
Red (24VDC)
*When the photocell function is not being used, connect the Blue Occupancy Sensor lead to the Blue Power Pack lead. When using the Photocell function, connect the Gray Occupancy Sensor lead to the Blue Power pack lead–Do not use the Blue Occupancy Sensor lead for the photocell function.
Minor Motion, IR
SIDE VIEW 8
product data
Multi-Technology Ceiling Occupancy Sensor
• Self-Adjusting: Internal microprocessor continua lly analyzes, evaluates and adjusts the sensitivity and time delay. Performance is kept at a maximum and user complaints are eliminated. • Custom off-white color matched for shaded ceilings. • Fast, Simple Installation: Easy ceiling mount, three wire connection (low voltage) and twist-lock sensor attachment for 360° rotation and flexibility. • Maximum Reliability, Low Cost: digital circuitry uses a minimum of components. • Small Motion Sensitivity: The ultrasonic technology provides excellent small motion sensitivity. • Timer Setting Feature: Automatic – 30sec – 30min. Test mode – 6sec with auto exit programming. • Non-Volatile Memory: Learned and adjusted settings saved in protected memory are not lost during power outages. • Walk-Through: Provides increased energy savings by decreasing the time delay to 2.5min when someone momentarily walks through the monitored space. • Wide Coverage: Units from 500 to 2000 sq. ft. available. • Power base (OPB 15) available for line voltage applications • Ambient Light Recognition: A Light Sensor prevents lights from turning on when the room is adequately lit by natural light. • Ultrasonic (U/S) Components: One or two U/S transducers and one or two narrow bandwidth receivers each 16mm in diameter. Frequency -Crystal controlled to ±.005%. • Device: Rugged, high-impact, injection molded plas tic, off -white. Color coded leads 6” (16.24 cm).
Basic Operation Occupancy sensors have two tasks: 1) Keeping the lights ON while the room is occupied, and 2) Saving energy by keeping the lights OFF while the room is unoccupied. Passive Infrared (PIR) is an excellent and precise technology for initially turning the lights ON, but lacks sensitivity for minor motion at distances. Ultrasonic (U/S) technology provides maximum sensitivity with continuous reflective high frequeny waves. This is opitmal for keeping the lights ON. Leviton’s multi-technology sensor combines the benefits of both PIR and U/S technologies for unrivaled performance and reliability. APPLICATIONS • Cafeterias • Computer rooms • Day care centers • Workspaces • Offices with cubicles • Restrooms • Storage rooms
• Classrooms • Conference rooms • Filing rooms • Open warehouses • Open areas • Stairwells • Executive, open, and private offices
How The OSCxx-M Automatically Adapts Condition Timer Left In Test Mode - The sensor remains in an 6 sec. test mode.
Example An installer accidentally leaves the sensor in the 6 sec. timer test mode and the lights may go off or on every 6 sec.
Self-Adaptive Reaction The sensor automatically resets the timer to 10 min after . 15 min of test mode.
False-On - The sensor incorrectly turns the lights on.
The sensor detects movement in the corridor or hall way and the room lights turn on.
After an initial movement is sensed, if another mov ement is not sensed within the timer setting then the delayed off time setting is automatically reduced.
False-Off - The sensor incorrectly turns the lights off.
The sensor does not detect movement because an occupant sits virtually motionless at a desk and the lights turn off.
If motion is sensed within a short period after the lights go off, then the current delayed off-time setting is increased.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSCxx-M0W
Features
product data Dimensions
DIP switch settings Switch Switch Functions Switch Settings Bank A OFF ON A1 N/A Multi-Tech Single Tech A2 N/A PIR Ultrasonic A3 Manual Mode Auto Adapting Enabled Auto Adapting Disabled A4 Walk-Thru Disable Walk-Thru Enabled Walk-Thru Disabled Bank B Override to On Auto Mode Lights forced On B1 B2 Override to Off Auto Mode Lights forced Off B3 Test Mode OFF’ON’OFF Enter/Exit Test Mode B4 LED Disable LEDs Enabled LEDs Disabled
1.571” 4.200”
*Bold items are factory defaults
field-of-view
SPECIFICATIONS TOP VIEW
ELECTRICAL20
20
Power Requirements
20 16
24 VDC, from11.5OSPxx Power Pack or OPB15 Power Base 8.5
11.5
8.5
Power Consumption
11.5
OSC05: 25mA, OSC10: 35mA, OSC20: 30mA
0
0
0
Output
TOP VIEW
TOP VIEW
24 VDC active high logic control signal with short circuit protection 8.5
8.5
11.5
11.5
11.5 CONTROLS
16 20
Ultrasonic Sensitivity
0-100%; green knob (factory setting: 50%)
SIDE VIEW 8 Infrared Sensitivity
SIDE VIEW 0-100%; red knob; (factory setting: 75%) 8
20
20
Light Sensor
0
0
3 5.6
Time Delay
OCS05-M0W
9 11
15
20 to 3,000 Lux; blue knob; factory set at 0 20 20 15 11 9 5.6 3 0 3 5.6 9 11 15 100% (*grey wire23required) 23 17 17
17
20
32
23
30sec-30min;OSC10-M0W black knob (factory setting: 10min)
OSCxx-M0W
11 9 5.5 3 0 3 5.5 9 11
15
20 22.5
32
TOP VIEW 20
TOP VIEW
20
20
U/S motion technology
Red LED
Infrared motion technology
20
8.5
0
0
8.5 8.5
8.5
20 SIDE VIEW
8
SIDE VIEW
0 0
0 03 5.6 3 5.6 9 119 11 15
Multi-Technology Ceiling Sensor, 500 sq. feet of coverage Multi-Technology Ceiling Sensor, 1000 sq. feet of coverage
OSC20-M0W
Multi-Technology Ceiling Sensor, 2000 sq feet of coverage
SIDE VIEW
SIDE VIEW
23
20
8
15 2011 9 155.6 11 3 90 5.6 3 5.6 15 92011 15 3 90 113 5.6 20 17 23 23 17 23 17 17
OSC10-M, 1000 sq. ft.
OSC10-M0W OSC10-M0W
Physical Wiring Sensor
OSPxx Series Power Pack Major Motion, IR Minor Motion, MajorUltrasonic Motion, IR
Red (24VDC) Minor Motion, Ultrasonic Major Motion, Ultrasonic
Black Blue
NC-Brown Common-Green NO-Brown/White To HVAC System
Major Motion, Ultrasonic
(control)
Red Black Blue* (occupancy) Gray*
Black
OSC10-M0W
0
0
1520 2320 23 17
17
OSC05-M, 500 sq. ft.
ORDERING INFORMATION OSC05-M0W
20
8
8
OCS05-M0W OCS05-M0W
Limited Five-Year Warranty
DESCRIPTION
16
20
20
20 8
CAT NO.
11.5
11.5
OTHER CUL/US Certified, meets ASHRAE Standard 90.1 and CEC Title 24 requirements
11.5
11.5
11.5
Listings
0
0
0
8.5
8-12 feet
11.5
8.5
8.5
32°F to 104°F (o°C to 40°C)
16
8.5
11.5
11.5
Major Motion, Ultrasonic
Mouting Height
20
11.5
Minor Motion, Ultrasonic
0% to 95% non-condensing, for indoor use only
TOP VIEW
11.5
Major Motion, IR
ENVIRONMENTAL
Warranty
15
OSC20-M, 2000 sq. ft.
TOP VIEW
Green LED
Relative Humidity
20 22.5
OSC20-M0W
INDICATORS
Operating Temperature Range
Major Motion, PIR
SIDE VIEW 8
(photocell + occupancy)
Red Black
NAFTA compliant and Made in USA models available Hot Black
Blue Black
Blue* (occupancy) Gray* (photocell + occupancy)
Load White
120/277/347 VAC60Hz
White
Line
Blue
Neutral (White)
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Visit our Website at: www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-8357/G10-cb
32
OSC20-M0W
product data
Basic Operation Occupancy sensors have two tasks: 1) Keeping the lights ON while the room is occupied, and 2) Saving energy by keeping the lights OFF while the room is unoccupied. Leviton’s OSCxx-RMW sensors combine the benefits of both PIR and U/S technologies for unrivaled performance and reliability. Additionally, the sensor is designed with an isolated relay contact; which enables the sensor to interface with other systems (example: BAS, HVAC or any dry-contact capable device or system). APPLICATIONS • Cafeterias • Computer rooms • Day care centers • Workspaces • Restrooms • Offices with cubicles Features
• Classrooms • Conference rooms • Stairwells • Executive, open, and private offices
• Multi-Technology: By using both PIR and U/S signals,
the sensor minimizes false triggering for high reliability. • Isolated Relay: Supports HVAC or other Class 2 low voltage signals • Supports both 24VAC/VDC power supplies • Wide Coverage: Units from 500 to 2000 sq. ft. available. • Self-Adjusting: Internal microprocessor continually analyzes, evaluates and adjusts the sensitivity and time delay. Performance is kept at a maximum and user complaints are eliminated.
• Custom white color matched for most common daylight harvesting architecture • Uses OSPxx Series Power Pack: Uses Class 2, 24 volt wiring, three wire connection (low voltage). Multiple sensors can control single or multiple power packs. • Additional mid-range lens assembly included for applications with mounting heights between 12’20’ • Fast, Simple Installation: Easy ceiling mount, twistlock sensor attachment for 360° rotation and flexibility. • Small Motion Sensitivity: The ultrasonic technology provides excellent small motion sensitivity. • Timer Setting Feature: Automatic – 30sec – 30min. Test mode – 4sec with auto exit programming. • Non-Volatile Memory: Learned and adjusted settings saved in protected memory are not lost during power outages. • Walk-Through: Provides increased energy savings by decreasing the time delay to 2.5min when someone momentarily walks through the monitored space. • Ultrasonic (U/S) Components: One or two U/S transducers and one or two narrow bandwidth receivers each 16mm in diameter. Frequency -Crystal controlled to ±.005%. • Device: Rugged, high-impact, injection molded plas tic, white. Color coded leads 7” (17.78 cm).
Leviton Mfg. Co., Inc. Lighting & Energy Solutions 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSCxx-RMW
Multi-Technology Ceiling Occupancy Sensor with Isolated Relay
product data How The OSCxx-R Automatically Adapts Condition Timer Left In Test Mode - The sensor remains in an 4 sec. test mode.
Example An installer accidentally leaves the sensor in the 4 sec. timer test mode and the lights may go off or on every 4 sec.
Adaptive Reaction The sensor automatically resets the timer to the preset time delay after 15 minutes of test mode
False-On - The sensor incorrectly turns the lights on.
The sensor detects movement in the corridor or hallway and the room lights turn on.
After an initial movement is sensed, if another movement is not sensed within the timer setting then the delayed off time setting is automatically reduced.
False-Off - The sensor incorrectly turns the lights off.
The sensor does not detect movement because an occupant sits virtually motionless at a desk and the lights turn off.
If motion is sensed within a short period after the lights go off, then the current delayed off-time setting is increased.
*Bold items are factory defaults **This setting is only used if the Single Techonology Option (Switch A1) is selected
field-of-view
TOP VIEW 20
TOP VIEW
20 TOP VIEW
TOP VIEW
20
20
8.5
11.5
20
11.5
11.5
11.5
11
16
8.5 8.5
8.5
0
0
0
TOP VIEW
20
11.5
11.5
16
0
0
0
8.5 8.5
11.5 16
11
8.5 11.5 8.5
11.5
11.5
11.5
16
11.5
20
20 SIDE VIEW
15 20 23 17
20
20
8
8
9 11
OSCxx-RMW
Sidebar Title Goes Here OSCxx-RMW
DIP switch settings Switch Switch Functions Switch Settings Bank A OFF ON A1 Single/Multi-tech Multi-Tech Single Tech A2 PIR/Ultrasonic PIR** Ultrasonic A3 Manual Mode Auto Adapting Enabled Auto Adapting Disabled A4 Walk-Thru Disable Walk-Thru Enabled Walk-Thru Disabled Bank B Override to On Auto Mode Lights forced On B1 B2 Override to Off Auto Mode Lights forced Off B3 Test Mode OFF’ON’OFF Enter/Exit Test Mode B4 LED Disable LEDs Enabled LEDs Disabled
20 22.5
32
15
11 9 5.5 3 0 3 5.5 9 11
15
SIDE VIEW
SIDE VIEW
0
32
Major Motion, PIR
OSC20-M0W
20 8
0
20 22.5
20
0
23 23
SIDE VIEW 0 Major Motion, IR MinorMotion, Motion,IR Ultrasonic Major Major Motion, Ultrasonic
Minor Motion, Ultrasonic Major Motion, Ultrasonic
15ft 20ft 30ft
25ft
20ft
15ft
10ft
5ft
0
5ft
Mid-Bay Lens
10ft
15ft
20ft
25ft
30ft
20 9 95.65.6 3 30 2017 1515 1111 17
OSC10-M0W OSC10-M0W
OSC05-R, 500 sq. ft.
10ft
8
00
3 5.6 30 5.6 9 119 1115 15 2020 23 17 17 23
OCS05-M0W OCS05-M0W
OSC20-R, 2000 sq. ft.
SIDE VIEW
SIDE VIEW
8
8
30 5.6 9 11 9 15 20 3 5.6 11 15 20 23 23 17 17
OSC10-R, 1000 sq. ft.
OSC20-MO
Physical Wiring
Sensor
OSPxx Series Power Pack Bas (Or Other Building Management System)
Red Black Blue (Control)
Red Black
N/C – Brown Common – Green
Blue
+24v - Red Com - Black Control - Blue
N/C - Brown Common - Green N/O - Brown/white
N/O – Brown/White
Load Blue
Hot (Black)
Red
Blue
Black
Black
Occupancy Sensor
Black
To BAS System
Line 120-277-347 VAC 60 Hz
To BAS System
Blue White
N/C – Brown Common – Green N/O– Brown/White
White
Neutral (White)
SPECIFICATIONS Power Requirements
15-28 VAC/VDC from OSPxx Power Pack or other Class 2 power supplies
Isolated Relay
1A @ 30VAC/VDC
Power Consumption
DC: OSC05: 25mA, OSC10: 30mA, OSC20: 30mA AC: OSC05: 45mA, OSC10: 50mA, OSC20: 50mA
Output
24 VDC active high logic control signal with short circuit protection
CONTROLS Ultrasonic Frequency
OSC05/OSC10: 40kHz OSC20: 32kHz
Ultrasonic Sensitivity
0-100%; green knob (factory setting: 50%)
Infrared Sensitivity
0-100%; red knob; (factory setting: 75%)
Time Delay
30sec-30min; black knob (factory setting: 10min)
INDICATORS Green LED
U/S motion technology
Red LED
Infrared motion technology
ENVIRONMENTAL Operating Temperature Range
32°F to 104°F (o°C to 40°C)
Relative Humidity
0% to 95% non-condensing, for indoor use only
OTHER Mouting Height
Low-range lens (default) 8-12 feet Mid-range lens 12-20 feet
Dimensions
4.2” W x 1.57” D
Listings
CUL/US Certified, meets ASHRAE Standard 90.1 and CEC Title 24 requirements
Warranty
Limited Five-Year Warranty
ORDERING INFORMATION CAT NO.
DESCRIPTION
OSC05-RMW
Multi-Technology Ceiling Sensor, 500 sq. feet of coverage
OSC10-RMW
Multi-Technology Ceiling Sensor, 1000 sq. feet of coverage
OSC20-RMW
Multi-Technology Ceiling Sensor, 2000 sq feet of coverage
NAFTA compliant and Made in USA models available
Leviton Mfg. Co., Inc. Lighting Management Systems 20497 SW Teton Avenue, Portland, OR 97062 1-800-736-6682 Tech Line: 1-800-959-6004 Fax: 503-404-5594 www.leviton.com/lms © 2010 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Sidebar OSCxx-RMW Title Goes Here
ELECTRICAL
OSCxx-RMW
product data
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Visit our Website at: www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-8579/E11-cb
product data
BASIC Operation
Occupancy sensors have two tasks: 1) Keeping the lights ON while the room is occupied, and 2) Saving energy by keeping the lights OFF while the room is unoccupied. Passive Infrared (PIR) is an excellent and precise technology for initially turning the lights ON, but lacks sensitivity for minor motion at distances. Ultrasonic (U/S) technology provides maximum sensitivity with continuous reflective high frequeny waves. This is opitmal for keeping the lights ON. Leviton’s OSW12 sensor combines the benefits of both PIR and U/S technologies for unrivaled performance and reliability.
APPLICATIONS
• Cafeterias • Classrooms • Conference rooms • Computer rooms • Day care centers • Filing rooms • Offices with cubicles • Open areas • Partitioned restrooms • Storage rooms • Workspaces • Open warehouses • Executive, private and open offices
Features
• Multi-Technology: By using both PIR and U/S signals,
the sensor minimizes false triggering for high reliability.
How The OSW12-M Automatically Adapts
• Flexible Base Mounting: Supplied twist-and-lock base mount permits fast alignment. Supplied cover hides mounting hardware and wires. Can be used with raceways for hard surface installations. Adjustable canopy for wall or ceiling mount. • Wide Coverage: Over 1200 sq. ft of coverage. • Fast, Simple Installation: A single mounting post and three color coded wires make installation easy. lly • Self-Adjusting: Internal microprocessor continua analyzes, evaluates and adjusts sensitivity and time delay settings. Performance is kept at a maximum and user complaints are eliminated. • Non-Volatile Memory: Learned and adjusted settings saved in protected memory are not lost during power outages. • Timer Setting Feature: Automatic – 30sec – 30min. Test mode – 6sec with auto exit programming. • Ambient Light Recognition: A Light Sensor prevents lights from turning on when the room is adequately lit by natural light. • Walk-Through: Provides increased energy savings by decreasing the time delay to 2.5min when someone momentarily walks through the monitored space. • Custom off-white color matched for shaded ceiling/ corner spaces and most common ceiling tiles. • Uses OSPxx Series Power Pack: Uses Class 2, 24 volt wiring, three wire connection (low voltage). Multiple sensors can control single or multiple power packs. • Power base (OPB 15) available for line voltage applications • High Motion Sensitivity: The large lens area and multi-element lens design give excellent range and sensitivity. • Infrared Sensing: High sensitivity 9.8 micron detector dual element. • Device: High-impact housing and injection molded plastic. Color coded wire leads are 6” long (16.24 cm). • Lens: 110˚ aperture, lens opening 2.2” x 1.47”, 36 elements (72 zones) small motion range 31 ft, large motion 68 ft
Condition Timer Left In Test Mode - The sensor remains in an 6 sec. test mode.
Example An installer accidentally leaves the sensor in the 6 sec. timer test mode and the lights may go off or on every 6 sec.
Self-Adaptive Reaction The sensor automatically resets the timer to 10 min after . 15 min of test mode.
False-On - The sensor incorrectly turns the lights on.
The sensor detects movement in the corridor or hall way and the room lights turn on.
After an initial movement is sensed, if another mov ement is not sensed within the timer setting then the delayed off time setting is automatically reduced.
False-Off - The sensor incorrectly turns the lights off.
The sensor does not detect movement because an occupant sits virtually motionless at a desk and the lights turn off.
If motion is sensed within a short period after the lights go off, then the current delayed off-time setting is increased.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSW12-M0W
Multi-Technology Wall/Corner Occupancy Sensor
product data Adjustment Range
Mounting Bracket
Dimensions
Base Cover Sensor
Mounting Base
Base Cover
Long Range Lens
6.43 inch
Mounting Base
4.23 inch
4.67 inch
Sensor
DIP switch settings Switch Switch Functions Switch Settings Bank A OFF ON A1 N/A Multi-Tech Single Tech A2 N/A PIR Ultrasonic A3 Manual Mode Auto Adapting Enabled Auto Adapting Disabled A4 Walk-Thru Disable Walk-Thru Enabled Walk-Thru Disabled BANK B B1 Override to On Auto Mode Lights forced On B2 Override to Off Auto Mode Lights forced Off B3 Test Mode OFF’ON’OFF Enter/Exit Test Mode B4 LED Disable LEDs Enabled LEDs Disabled
2.80 inch
field-of-view Field of View (in feet) TOP VIEW 58
31
*Bold items are factory defaults
16 11.5
SPECIFICATIONS ELECTRICAL
0
Power Requirements
24 VDC, 25 mA (.6W) from OSPxx Power Pack or OPB15 Power Base
Power Consumption
25mA Stand-by
Output
24 VDC active high logic control signal with short circuit protection
11.5 16
31
Minor Motion, IR Major Motion, IR 58
Minor Motion, Ultrasonic
OSW12-M0W
CONTROLS Ultrasonic (U/S) Sensitivity
0 to 100%: red knob (factory setting: 75%)
Infrared Sensitivity
0 to 100%: green knob (factory setting: 50%)
Light Sensor
Blue knob 20 to 3,000 Lux. Factory set at 100% (Grey wire required)
Time Delay
30sec-30min; black knob (Factory setting: 10min)
SIDE VIEW
8
0
03 8
15 23
Major Motion, Ultrasonic
68
31 32
INDICATORS Red LED
Infrared motion technology
Green LED
Ultrasonic (U/S) motion technology
Physical Wiring NC-Brown Common-Green NO-Brown/White
ENVIRONMENTAL Operating Temperature Range
32°F to 104°F (o°C to 40°C)
Relative Humidity
0% to 95% non-condensing, for indoor use only
OTHER Mouting Height
8-10 feet
Listings
CUL/US Certified, meets ASHRAE Standard 90.1 and CEC Title 24 requirements
Warranty
Red (24VDC) Black
CAT NO.
DESCRIPTION
OSW12-M0W
Multi-Technology Wall/Corner Occupancy Sensor
NAFTA compliant and Made in USA models available
Sensor
Blue (Control)
Black
Red
OSPxx Series Power Pack
Black Blue* (occupancy)
Gray*
Blue
Hot (Black)
(photocell + occupancy)
Blue
Line 120-277-347VAC 60Hz
Load
Red
Black
Limited Five-Year Warranty
ORDERING INFORMATION
To HVAC System
Black White
Blue* (occupancy)
Gray* (photocell + occupancy)
Neutral (White)
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-7732A/G10-cb
White
product data
BASIC Operation Specifically designed for long, relatively narrow spaces such as warehouse aisle and corridors, the OSWHBI0W Occupancy Sensor provides long range and high sensitivity. The OSWHB-I0W Occupancy Sensor is a “high bay” lens. This lens provides coverage up to 55 ft. when mounted 20 ft. above the floor. Can be mounted lower if needed. The mounting base, provided with the sensor, allows quick and easy mounting in corners, on walls or on ceilings. The most common applications are factory storage areas, warehouse aisles and corridors. APPLICATIONS • Hallways • Cafeterias • Parking garages • Stairwells • Warehouses • Workspaces
• Loading docks • Storage rooms
Features • Fast, Simple Installation: Easy base mount, three wire connection (low voltage) and twist-and-lock detector attachment. • Self-Adjusting: Internal microprocessor continua lly analyzes, evaluates and adjusts the infrared sensi tivity and time delay. Performance is kept at a maxi mum and user complaints are eliminated. • Flexible Base Mounting: Supplied twist-and-lock base mount permits fast alignment. Supplied cover hides mounting hardware and wires. Can be used with How The OSwhb-i Automatically Adapts
raceways for hard surface installations. Adjustable canopy for wall or ceiling mount. • Range & Coverage: Up to 55 ft. for gross body motion or forklift. Max. 7 feet wide. • Multi-element, high bay lens for mounting up to 30 feet. • Power base (OPB15) available for line voltage applications. • Ambient Light Recognition: A Light Sensor prevents lights from turning on when the room is adequately lit by natural light. • Non-Volatile Memory: Learned and adjusted settings saved in protected memory are not lost during power outages. • Timer Setting Feature: Automatic – 30sec – 30min. Test mode – 6sec with auto exit programming. • Walk-Through: Provides increased energy savings by decreasing the time delay to 2.5min when someone momentarily walks through the monitored space. • High Motion Sensitivity: Large lens area and multi-element lens design gives excellent range and sensitivity. • Custom off-white color matched for shaded ceiling/ corner spaces and most common ceiling tiles. • Uses OSPxx Series Power Pack: Uses Class 2, 24 volt wiring, three wire connection (low voltage). Multiple sensors can control single or multiple power packs. • Device: High-impact housing and injection molded plastic. Color coded wire leads are 6” long (16.24 cm). • Infrared Sensing: High sensitivity 9.8 micron detector dual element.
Condition Timer Left In Test Mode - The sensor remains in an 6 sec. test mode.
Example An installer accidentally leaves the sensor in the 6 sec. timer test mode and the lights may go off or on every 6 sec.
Self-Adaptive Reaction The sensor automatically resets the timer to 10 min after . 15 min of test mode.
False-On - The sensor incorrectly turns the lights on.
The sensor detects movement in the corridor or hall way and the room lights turn on.
After an initial movement is sensed, if another mov ement is not sensed within the timer setting then the delayed off time setting is automatically reduced.
False-Off - The sensor incorrectly turns the lights off.
The sensor does not detect movement because an occupant sits virtually motionless at a desk and the lights turn off.
If motion is sensed within a short period after the lights go off, then the current delayed off-time setting is increased.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSWHB-I0W
Passive Infrared Aisle (High Bay) Occupancy Sensor
product data adjustment Range
Mounting Bracket
Dimensions
60° Mounting Base
85°
Base Cover
Long Range Lens
6.43 inch
4.23 inch
4.67 inch
Sensor
DIP switch settings Switch Switch Functions Switch Settings Bank A OFF ON N/A A1 A2 N/A A3 Manual Mode Auto Adapting Enabled Auto Adapting Disabled A4 Walk-Thru Disable Walk-Thru Enabled Walk-Thru Disabled Bank B B1 Override to On Auto Mode Lights forced On B2 Override to Off Auto Mode Lights forced Off B3 Test Mode OFF’ON’OFF Enter/Exit Test Mode B4 LED Disable LEDs Enabled LEDs Disabled
2.80 inch
Field-of-viewField of View (in feet) TOP VIEW 3.5 0 3.5
*Bold items are factory defaults SIDE VIEW
30
SPECIFICATIONS ELECTRICAL
Major Motion, PIR
Power Requirements
24 VDC, 15mA (.36W) from OSPxx Power Pack or OPB15 Power Base
Power Consumption
15mA Stand-by
Output
24 VDC active high logic control signal with short circuit protection
OSWHB-I0W
CONTROLS
0
Infrared Sensitivity
0 to 100%: red knob (factory setting: 75%)
Light Sensor Adjustment
Blue knob 20 to 3,000 Lux. Factory set at 100% (Grey wire required)
Time Delay
30sec-30min; black knob (Factory setting: 10min)
INDICATORS Red LED
3
13
25
55'
OSWHB-I0W
Physical Wiring
Infrared motion technology
ENVIRONMENTAL Operating Temperature Range Relative Humidity
NC-Brown Common-Green NO-Brown/White
32°F to 104°F (o°C to 40°C)
To HVAC System
Red (24VDC) Black
0% to 95% non-condensing, for indoor use only
OTHER Mounting Height
8-10 feet
Listings
CUL/US Certified, meets ASHRAE Standard 90.1 and CEC Title 24 requirements
Sensor
Blue (Control)
Black
Red
OSPxx Series Power Pack
Black Blue* (occupancy)
Warranty
Hot (Black)
CAT NO.
DESCRIPTION
OSWHB-I0W
Infrared Aisle (High Bay) Occupancy Sensor
(photocell + occupancy)
Blue
Line 120-277-347VAC 60Hz
Load
Red
Black
Limited Five-Year Warranty
ORDERING INFORMATION
Gray*
Blue
Black White
Blue* (occupancy)
Gray* (photocell + occupancy)
Neutral (White)
NAFTA compliant and Made in USA models available
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-7734A/G10-cb
White
product data
BASIC Operation Specifically designed for long, relatively narrow spaces such as hallways and corridors, the OSWLR-I Occupancy Sensor provides long range and high sensitivity. The OSWLR-I Occupancy Sensor utilizes a “long range” lens. This lens provides coverage up to 100 ft. when mounted 10 ft. above the floor. Can be mounted lower if needed. The mounting base, provided with the sensor, allows quick and easy mounting in corners, on walls or on ceilings. The most common applications are factory storage areas, warehouse aisles and corridors. Applications • Hallways • Loading docks • Cafeterias • Open offices • Parking garages • Storage rooms • Warehouses • Workspaces • Vending rooms Features • Fast, Simple Installation: Easy base mount, three wire connection (low voltage) and twist-and-lock detector attachment. • Self-Adjusting: Internal microprocessor continually analyzes, evaluates and adjusts the infrared sensitivi ty and time delay. Performance is kept at a maximum and user complaints are eliminated. • Multi-element, long range lens • Flexible Base Mounting: Supplied twist-and-lock base
mount permits fast alignment. Supplied cover hides mounting hardware and wires. Can be used with raceways for hard surface installations. Adjustable canopy for wall or ceiling mount. • Range & Coverage: Up to 100 ft. for gross body motion or forklift. Max. 33.2 feet wide. • Custom off-white color matched for shaded ceiling/ corner spaces and most common ceiling tiles. • High Motion Sensitivity: The large lens area and multi-element lens design give excellent range and sensitivity. • Ambient Light Recognition: A Light Sensor prevents lights from turning on when the room is adequately lit by natural light. • Non-Volatile Memory: Learned and adjusted settings saved in protected memory are not lost during power outages. • Timer Setting Feature: Automatic – 30sec – 30min. Test mode – 6sec with auto exit programming. • Walk-Through: Provides increased energy savings by decreasing the time delay to 2.5min when someone momentarily walks through the monitored space. • Uses OSPxx Series Power Pack: Uses Class 2, 24 volt wiring, three wire connection (low voltage). Multiple sensors can control single or multiple power packs. • Power base (OPB 15) available for line voltage applications • Device: High-impact housing and injection molded plastic. Color coded wire leads are 6” long (16.24 cm). • Infrared Sensing: High sensitivity 9.8 micron detector dual element.
How The OSWLR-I Automatically Adapts Condition Timer Left In Test Mode - The sensor remains in an 6 sec. test mode.
Example An installer accidentally leaves the sensor in the 6 sec. timer test mode and the lights may go off or on every 6 sec.
Self-Adaptive Reaction The sensor automatically resets the timer to 10 min after . 15 min of test mode.
False-On - The sensor incorrectly turns the lights on.
The sensor detects movement in the corridor or hall way and the room lights turn on.
After an initial movement is sensed, if another mov ement is not sensed within the timer setting then the delayed off time setting is automatically reduced.
False-Off - The sensor incorrectly turns the lights off.
The sensor does not detect movement because an occupant sits virtually motionless at a desk and the lights turn off.
If motion is sensed within a short period after the lights go off, then the current delayed off-time setting is increased.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSWLR-I0W
Passive Infrared Aisle (Long Range) Occupancy Sensor
product data Mounting Bracket
Adjustment Range
Dimensions
Mounting Base
85°
4.23 inch
60°
Base Cover
6.43 inch
4.67 inch
Long Range Lens
Sensor
DIP switch settings Switch Switch Functions Switch Settings Bank A OFF ON A1 N/A A2 N/A A3 Manual Mode Auto Adapting Enabled Auto Adapting Disabled A4 Walk-Thru Disable Walk-Thru Enabled Walk-Thru Disabled BANK B B1 Override to On Auto Mode Lights forced On B2 Override to Off Auto Mode Lights forced Off B3 Test Mode OFF’ON’OFF Enter/Exit Test Mode B4 LED Disable LEDs Enabled LEDs Disabled
2.80 inch
FIELD-OF-VIEW Field of View (in feet) TOP VIEW 16.6
*Bold items are factory defaults 0
SPECIFICATIONS ELECTRICAL
16.6
Power Requirements
24 VDC, 15mA (.36W) from OSPxx Power Pack or OPB15 Power Base
Power Consumption
15mA Stand-by
Output
24 VDC active high logic control signal with short circuit protection
OSWLR-I0W
CONTROLS Infrared Sensitivity
0 to 100%: red knob (factory setting: 75%)
Light Sensor
Blue knob 20 to 3,000 Lux. Factory set at 100% (Grey wire required)
Time Delay
30sec-30min; black knob (Factory setting: 10min)
SIDE VIEW
10
Major Motion, PIR
0 0
14
42
71
100
OSWLR-I0W
Physical Wiring
INDICATORS Red LED
NC-Brown Common-Green NO-Brown/White
Infrared motion technology
ENVIRONMENTAL Operating Temperature Range
32°F to 104°F (o°C to 40°C)
Relative Humidity
0% to 95% non-condensing, for indoor use only
Listings Warranty
Black
Sensor
Blue (Control)
Black
Red
OTHER Mounting Height
To HVAC System
Red (24VDC)
OSPxx Series Power Pack
Black Blue* (occupancy)
8-10 feet CUL/US Certified, meets ASHRAE Standard 90.1 and CEC Title 24 requirements Limited Five-Year Warranty
Gray*
Blue
Hot (Black)
(photocell + occupancy)
Blue
Red
Black
Line 120-277-347VAC 60Hz
Black White
DESCRIPTION
OSWLR-I0W
Passive Infrared Aisle (Long Range) Occupancy Sensor
Blue* (occupancy)
Gray* (photocell + occupancy)
ORDERING INFORMATION CAT NO.
Load
Neutral (White)
NAFTA compliant and Made in USA models available
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-7733A/G10-cb
White
product data
OSP/OSA Power Pack Series
Containing both a 24VDC supply and a 20A line voltage relay for most models, the Leviton compact Power Pack provides low voltage power and line voltage control for Leviton Occupancy Sensors. Versions include Auto-ON and ManualON inputs for occupancy sensors, Hold-ON and Hold-OFF capabilities, and a local input for momentary or maintained dry contact switches. The internal relay can control up to 20A for 120, 230, 277VAC or 347VAC ballast loads and 120VAC incandescent loads. The OSP Power Pack Series is also used to supply power to the OSA AddA-Relay model. The Power Pack conveniently mounts in a knockout hole of a standard junction box. The unit can be placed inside or outside the junction box with a simple twist-on nut.
• OSP20-RD - Interface to BAS/BMS and HVAC • OSP20-RDH - Bi-Level or A/B lighting - Shared emergency lighting - Inexpensive 3-Way switching • OSA20 - Expanding circuit switching capacity - Cost conscious mixed voltage solutions Easy Mounting
APPLICATIONS Use a Leviton Power Pack with Leviton Occupancy Sensors in the following applications. • Classrooms • Conference rooms • Anywhere optimal lighting and energy savings are desired • Load shed/Interface hold-OFF applications • Retail hold-ON/bypass applications • OSP20 - Multi-circuit switching - Ceiling access lighting and energy management controls
Twist-On Nut
Junction Box
Ballast Cavity of Light Fixture
Ballast
Leviton Mfg. Co., Inc. Lighting & Energy Solutions 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSP/OSA Power Pack Series
Provides low voltage power and line voltage control for Leviton Occupancy Sensors
product data FEATURES OSP20-0D0/OSP20-ND0 • Self-contained transformer and relay • Internal voltage regulator – regulated 24VDC current, 150mA output • Fast installation - mounts inside or outside junction box, or inside fluorescent ballast cavity with a simple twist-on nut • Single or multiple luminaire control • Zero crossing circuitry • UL 2043 Plenum Rated • Companion Add-A-Relay provides additional capacity (OSA20-R00) • NAFTA compliant (OSP20-ND0) • Made in USA compliant (OSP20-DA0)
dimensions
3.13” (79.5mm)
OSP/OSA Power Pack Series
OSP20-RD0/OSP15-R30/OSP20-NH0 Includes the same features as the OSP20-0D0, plus: • Dry contact relay for combined sensor control of lighting and heating/air conditioning • Dry contact for designing controlled closure • Form A relay for interface to Building Automation/ Management Systems (BAS/BMS) • NAFTA compliant (OSP20-NH0) • Made in USA compliant (OSP20-RAD) OSP20-RDH/OSP20-RNH Includes the same features as the OSP20-RD0, plus: • Auto-ON and Manual-ON inputs for occupancy sensors • “Hold-ON” input – when activated, unit is always ON regardless of any other input • “Hold-OFF” input – when activated, unit is always OFF regardless of any other input • Local inputs for momentary or maintained dry contact low voltage switching • Robust mechnical batching relay designed to perform as a Form C normally closed device • Increased power supply output to 255mA • Upon loss of power, latching relay maintains current state (closed or open) - H.I.S. >(High In-rush Stability) - Heavy duty zero crossing circuitry • Robust mechanical latching relay • NAFTA compliant (OSP20-RNH) • Made in USA compliant (OSP20-RAH) OSA20-R00/OSA20-RNO • 15A relay can be added to any OSP20 power pack for flexible design • For design flexibility when cost conscious • Inexpensive solution for mixed voltage lighting design • Used for expanding circuit switching capacity • Use OSP20 power packs for Emergency Lighting circuits and OSA20 Add-A-Relays for inexpensive control of normal lighting • NAFTA compliant (OSA20-RN0) • Made in USA compliant (OSP20-RA0)
3.81” (96.8mm)
2.40” (61mm) 1.43” (36.3mm)
OSPxx Series Power Pack
Sensor NC-Brown Common-Green NO-Brown/White
Red (24VDC)
To HVAC System
Black Blue (Control)
Black Red Black Blue* (occupancy)
Gray*
Blue
Hot (Black)
Blue
Red
Black
Line 120-277-347VAC 50/60Hz
Load
(photocell + occupancy)
Black
White
White
Blue* (occupancy)
Gray* (photocell + occupancy)
Neutral (White)
NC-Brown Common-Green NO-Brown/White To HVAC System
OSA20 Add-A-Relay Hot (Black) Line 120-277-347VAC 60Hz Neutral (White)
Blue
Blue Black
Load White
OSP20-RxH Bi-Level Switching OSP20-RxH Bi- Level Switching N
Yellow
Zone 1 – Auto ON
H
Orange Orange/Yellow
Black
Blue
White
White/Blue
Blue
Green
Blue
Brown/White Brown
Occupancy Sensor
Local SW 1 Auto ON
+24VDC
Red
Com
Black
LOAD 1
LOAD 2
Yellow
Zone 2 – Manual ON
Orange Orange/Yellow
Black
Blue
White
White/Blue
Local SW 2 Momentary or Maintained Switches
Manual ON
Blue
Green
Blue
Brown/White Brown Red Black
Com
SIGNAL TYPE Line Voltage Wires Line 120-230-277VAC (OSP20-Rx0) Neutral Load Load Class 2 Wires Power (24VDC) DC Return Occupancy Auto-ON Occupancy Manual-ON Hold-ON Hold-OFF Local Switch Input SIGNAL TYPE
COLOR
GAUGE
Black
18AWG
White Blue Blue
18AWG 14AWG 14AWG
Red Black Blue Blue/White Yellow Orange Yellow/Orange COLOR
22AWG 22AWG 22AWG 22AWG 22AWG 22AWG 22AWG GAUGE
HVAC Wires Dry Contact Common Dry Contact NO (Normally Open) Dry Contact NC (Normally Closed)
Green Brown/White
22AWG 22AWG
Brown
22AWG
• All wires rated at 105ºC, 600V insulation. • Class 2 wires are Teflon jacketed, for plenum applications. • Dry Contact wiring is Class 1 and Class 2 rated.
Power Pack Capacity Formula Leviton power packs can be used to provide power to one or more occupancy sensors. Since current consumptions of occupancy sensors may vary, the best way to ensure you order the correct number of power packs and add-a-relays is by using this formula: # of sensor Model As X + Sensor A current consumption rating
# of sensor Model Bs X + Sensor B current consumption rating
# of Add a Relays X 50mA
< 150mA per power pack
DESCRIPTION OSC04-I, OSC15-I, OSWHB-I, OSWLR-I, OSWWV-I
current consumption
OSC05-M, OSC05-U, OSW12-M
30mA
OSC10-M, OSC10-U
40mA
OSC20-M, OSC20-U
32mA
OSA20-R00 Add a Relay
50mA
20mA
Leviton Mfg. Co., Inc. Lighting & Energy Solutions 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSP/OSA Power Pack Series
WIRING Designations
product data SPECIFICATIONS ELECTRICAL Line Voltage
120-230-277 VAC
Relay Rating
HVAC Relay: 0.5A @ 120VAC, 1.0A @ 30VDC
ENVIRONMENTAL Operating Temperature Range
32°F to 104°F (o°C to 40°C)
Relative Humidity
0% to 90% non-condensing, for indoor use only
OTHER Construction
Case: high impact, UL rated plastic Relay: class B (130°C) insulating material; silver alloy contacts Wire: 6” leads, 18AWG input; LV connections: 7” leads 22AWG
Dimensions
2.400”H x 3.811”W x 1.432”D (60.96mm x 96.80mm x 36.37mm)
Listings
UL/CUL Listed, FCC Certified, NOM Certified, and meets ASHRAE 90.1 requirements
Color
Black
Warranty
Limited Five-Year Warranty
OSP/OSA Power Pack Series
ORDERING INFORMATION Description
Cat. No.
Power Input
Relay Rating
Control Input
Power Supply Output
Power Pack
OSP20-0D0
120-230-277VAC, 50/60 Hz
20A fluorescent/incandescent @ 120V, 20A fluorescent @ 230-277V; 1HP @ 120V, 2HP @ 240V
5mA, 24VDC
150mA, 24VDC
Power Pack with Dry Contact Relay
OSP20-RD0
120-230-277VAC, 50/60 Hz
20A fluorescent/incandescent @ 120V, 20A fluorescent @ 277V; 1HP @ 120V, 2HP @ 240V; HVAC: 0.5A @ 120VAC, 1A @ 30VDC
5mA, 24VDC
150mA, 24VDC
Power Pack with Dry Contact Relay
OSP15-R30
347VAC, 60 Hz
15A fluorescent @ 347V; 1HP @ 120V, 2HP @ 240V; HVAC: 0.5A @ 120VAC, 1A @ 30VDC
5mA, 24VDC
120mA, 24VDC
Add-A-Relay Unit with Dry Contact Relay
OSA20-R00
15A incandescent @ 120V, 20A fluorescent @ 120V, 20A fluorescent @ 277V, 15A fluorescent @ 347V; HVAC: 0.5A @ 120VAC, 1A @ 30VDC
5mA, 24VDC
20A fluorescent/incandescent @ 120V; 20A fluorescent@ 277V; 1HP @ 120V, 2HP @ 240V; HVAC; .05A @ 120VAC, 1A @ 20VDC and 15A fluorescent @ 347V; 1HP @ 120V; 2HP @ 240; HVAC: 0.5A @ 120V, 1A @ 30VDC
5mA, 24VDC
Power Pack with Dry Contact Relay and Override Inputs for Occupancy Sensors
OSP20-RDH
—
120-230-277VAC, 50/60Hz
—
225mA, 24VDC
* Consult factory for 208, 220, and 240V models.
leviton specification submittal JOB NAME: JOB NUMBER:
CATALOG NUMBERS:
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-8226B/A11-ak
PRODUCT data
Power Base Adaptor
Problem: Hard ceilings with limited access for low-voltage wiring installations Solution: Leviton’s Power Base Adaptor
Description Leviton’s OPB15-0DW is a self-contained transformer and relay adaptor with a patent-pending technology that converts any Leviton low-voltage ceiling or wall sensor to line voltage. The OPB150DW conveniently mounts to a standard 2.125” deep x 4” octagon, 2.125” deep x 4” square electrical box with mud ring, or to 4” surface mount wire raceway boxes. It provides wire leads for simple connection to a line-voltage circuit and a two-part terminal block for fast, easy low-voltage connections to the sensor. The Power Base Adaptor is ideal for both existing buildings with limited access to wiring and new construction with line-voltage circuiting only. The OPB15-0DW offers the same performance features as Leviton’s OSP Power Pack Series. By providing the flexibility to install Leviton’s full line of low-voltage sensors in any application, the Power Base Adaptor is a “problem solver” that increases the versatility of Leviton’s low-voltage ceiling occupancy sensors.
Applications • Lavatories • Remodels in hard ceiling spaces • Energy conservation retrofits • Any installation with limited access for low-voltage wiring installation • Surface mount boxes Features & Benefits • Ability to convert Leviton low-voltage ceiling sensors to line-voltage offers greater versatility in any application • Streamlined installation offers customers an immediate energy-management solution • Mounts easily in electrical box and provides leads for simple line voltage connection • Two-piece terminal block provides fast, easy low-voltage connections to the sensor • Zero-crossing circuitry for enhanced reliability and long-life operation • Patented
Use the OPBCA Cosmetic Adaptor for surface mount wire raceway boxes or to cover any wallboard cuts for a professional finish to all projects.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions 20497 SW Teton Avenue, Tualatin, OR 97062 1-800-736-6682 Tech Line: 1-800-959-6004 Fax: 503-404-5594 www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OPB15 Power Base Adaptor
Convert any Leviton low-voltage sensor to line voltage.
product BULLETIN
OPB15 Power Base Adaptor
Specifications Electrical Input Voltage Output Voltage
120-277 VAC @ 50/60Hz 24 VDC, 40mA nominal, full-wave rectified and filtered, unregulated.(Each Leviton sensor contains an internal voltage regulator.) Load Rating 15A Incandescent, Electronic or Magnetic Fluorescent Ballast; 3/4 HP at 120V Wire Designation Line-Black, Load-Blue, White-Neutral Power Consumption Lights On: 120V - 1.58W, 277V - 2.34W (base only) Lights Off: 120V - .27W, 277V - 1.04W Environmental Operating 0°C to 40°C (32°F to 104°F) Temperature Range Storage -10°C to 85°C (14°F to 185°F) Temperature Range Relative Humidity 0% to 90% non-condensing Physical Case High impact plastic Relay Class B (130°C) insulating material. Silver alloy contacts switching power supply — 120/230/277 VAC Wire 6” leads 14 AWG input, two-part terminal block output Size 4.5” dia. x 1.75” deep Color White Agency Standards and Compliance OPB15-0DW UL and cUL Listed NOM CEC Title 24 Backed by Limited Five-Year Warranty Ordering Information Cat. No. Description OPB15-0DW Occupancy Sensor Power Base Adaptor OPBCA-00W Power Base Cosmetic Adaptor Plate
Installation and Wiring Connect and mount the OPB15 to the electrical box. Using the terminal block, connect the low voltage sensor. Match the arrows on the sensor to the base and twist to lock. Test the sensor for correct operation.
Wiring diagram
Color White White
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
20497 SW Teton Avenue, Tualatin, OR 97062 Telephone: 1-800-736-6682 • FAX: 503-404-5594 • Tech Line (6:00AM-4:00PM P.S.T. Monday-Friday): 1-800-959-6004
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-8533/A11-cb
56081-2I Leviton Catalog #: 56081-2I Description: 3 Amp, 24 Volt, Decora Plus Rocker Double-Throw Ctr-OFF Momentary Contact Single-Pole AC Quiet Switch, Commercial Grade, Self Grounding, Back & Side Wired, - Ivory Product Features: Ground: Feature: Amperage: Voltage: Termination: Actuator Material: Body Material: Strap Material: Color: Warranty:
Self Grounding Double-Throw Ctr-OFF Momentary Contact 3 Amp 24 Volt Back & Side Thermoplastic Thermoplastic Steel Ivory 10 Year Limited
For answers to technical questions call our Techline at 1-800-824-3005 (8:30AM-6:00PM EST M-F). For Other products go to www.leviton.com and select Leviton EZ-Find. Leviton Manufacturing Co., Inc. 59-25 Little Neck Parkway, Little Neck, NY 11362-2591 Telephone: 1-800-323-8920 FAX: 1/800-832-9538 Leviton Manufacturing of Canada, Ltd. 165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 Outside Canada: 1-514-954-1840 FAX: 1-514-954-1853/1854 Inside Canada: 1-800-469-7890 Techline: 1-800-405-5320 FAX 1-800-563-1853
56081-2W Leviton Catalog #: 56081-2W Description: 3 Amp, 24 Volt, Decora Plus Rocker Double-Throw Ctr-OFF Momentary Contact Single-Pole AC Quiet Switch, Commercial Grade, Self Grounding, Back & Side Wired, - White Product Features: Ground: Feature: Amperage: Voltage: Termination: Actuator Material: Body Material: Strap Material: Color: Warranty:
Self Grounding Double-Throw Ctr-OFF Momentary Contact 3 Amp 24 Volt Back & Side Thermoplastic Thermoplastic Steel White 10 Year Limited
For answers to technical questions call our Techline at 1-800-824-3005 (8:30AM-6:00PM EST M-F). For Other products go to www.leviton.com and select Leviton EZ-Find. Leviton Manufacturing Co., Inc. 59-25 Little Neck Parkway, Little Neck, NY 11362-2591 Telephone: 1-800-323-8920 FAX: 1/800-832-9538 Leviton Manufacturing of Canada, Ltd. 165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 Outside Canada: 1-514-954-1840 FAX: 1-514-954-1853/1854 Inside Canada: 1-800-469-7890 Techline: 1-800-405-5320 FAX 1-800-563-1853
PRODUCT DATA
Decora® Wall Switch PIR Occupancy Sensor
BASIC OPERATION The ODS10-ID uses passive infrared (PIR) detection technology to monitor a room for occupancy through a segmented Fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as there is an occupant moving through the sensor zones. OPTIMAL
LED READY™
LED
DESIGN
Exclusive LED High Inrush Stability (H.I.S.) circuitry designed to handle the high inrush electronic ballast loads of today’s LED lighting and offer unmatched durability and service. Our true ZeroCross Relay switches are at the zero crossing point of the AC power curve, ensuring maximum contactor life and compatibility with LED ballasts. Leviton Occupancy and Vacancy Sensors are the premiere choice for LED compatibility.
APPLICATIONS Leviton’s Cat. No. ODS10-ID Decora® Wall Switch Passive Infrared (PIR) Occupancy Sensor is used to provide automatic lighting control for energy savings and convenience in a variety of commercial applications including: • Small offices • Conference rooms • Lounges • Classrooms The ODS10-ID can be used for automatic switching of incandescent lamps and fluorescent and low-voltage lighting with electronic or magnetic ballasts. The unit also features a manual override switch that can be used to keep lights OFF while an area is occupied, which may be desired in conference rooms and other areas during slide or film presentations. The unit installs in place of a single-pole wall switch and fits in a standard wall box. The unit requires a ground connection.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les © 2014 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
ODS10
ODS10-ID
ODS10
PRODUCT DATA FEATURES • Fits in standard wallbox and replaces single-pole wall switch. Gangable with other units. • Low-profile design eliminates obtrusive “scanning-device” look. Elegant Decora wallplates complement any interior for sleek aesthetics; uses Decora wallplates and coordinates with Leviton’s popular line of Decora wiring devices. • 180° field-of-view provides approximately 2100 square feet of coverage suitable for small offices, conference rooms, classrooms, lounges and a variety of commercial areas. • Convenient pushbutton provides manual-ON/OFF light switching at any time. • Two dual element PIR sensors used to widen detection range. • Segmented Fresnel lens provides optimum sensitivity and performance. Designed with an extensive “minor motion” area where even slight body movements will be detected. • Vandal resistant PIR lens. • Patented Blinders - horizontal field-of-view may be adjusted between 180° and 60° of arc by using integral blinders located on either side of the lens. No masking tape required. • Manual-ON/auto-OFF mode for installations where manual-ON switching is required but auto-OFF switching is still desired for CA Title 20/24 energy savings. • To comply with CA Title 20, red LED indicator light flashes wh en sensor detects motion to verify detection is active. •Time Delay adjustment for delayed-OFF time settings of 30 seconds (for walking test), 10 minutes, 20 minutes, and 30 minutes. Allows customized adjustments to maximize energy savings. • Light Sensor Adjustable Ambient Light Override ranges from approximately 2 foot-candles (20 lux) to 500+ foot-candles (5000+ lux) to prevent lights from turning ON automatically during periods of ample natural light, increasing energy savings. • Light sensor enables the load hold-OFF feature once level has been set. • Vacancy confirmation - when the time out expires and the lights turn OFF a 30 second vacancy confirmation exists to turn the lights back ON. • False detection circuitry.
• Presentation Mode feature for slide or film presentations allows push buttons to turn lights OFF and keep them OFF while the room is occupied. • One unit can be used for 120V through 277V lighting. Compatible with both electronic and magnetic ballasts. • Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts. • Exclusive Leviton H.I.S. Circuitry. Specifically designed to handle today’s high inrush electronic ballast loads and offer unmatched durability and service. • No neutral design is optional for retrofit applications. FIELD-OF-VIEW The ODS10-ID provides a 180° field-of-view with a maximum coverage area of approximately 2100 square feet. The maximum sensing distance in front of the sensor is 40 feet, and at each side is 30 feet. A “minor motion” zone detects relatively small body movements and allows the lights to stay ON even though a person may not be moving or walking around the room. The remainder of the field-of-view, the “major motion” zone, exhibits a lesser degree of sensitivity and requires larger movements. 40 TOP VIEW 30
15
0
15
30
Major Motion, IR Minor Motion, IR
40 SIDE VIEW
5 4 0 0
ODSXX-ID
15
ODS10-ID Field-of-View (in feet)
40
DIMENSIONAL DIAGRAMS 1.75” (44.4mm)
Mounting Yoke 0.48” (12.6mm)
1.30” (33.0mm)
Vandal Resistant PIR Lens 1.35” (34.4mm)
Patented Blinders Control Panel, Cover Removed
BLINDERS 2
4
TIME
2.60” (66.2mm)
7
LED Window and Light Sensor
10
3
4.06” (103.2mm)
2.61” (66.3mm)
1
RANGE
Push Button
WIRING DIAGRAM ODS10/15
ODS10/15
Blue
Blue Blue
Black
Black
Black
Black
Line 120-230-277VAC, 50/60Hz
Load
White
Neutral (White) Note: Ground must be connected
Load
Green Ground
Green Ground
Neutral (White) Note: Ground must be connected
ODS10/15 Wall Switch Occupancy Sensor Wiring Diagram, Single Location Control
ODS10/15 Wall Switch Occupancy Sensor Wiring Diagram, Multi-Location Control
Leviton Mfg. Co., Inc. Lighting & Energy Solutions 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les © 2014 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
White
Green Ground
Line 120-230-277VAC, 60Hz
ODS10
Hot (Black)
Black
Hot (Black)
PRODUCT DATA INSTALLATION The ODS10-ID may replace a single-pole wall switch mounted in a standard wallbox. The unit must be properly grounded in order to operate. The unit’s integral blinders may be used to restrict the fieldof-view to prevent unwanted detection of hallway traffic. It should be positioned at least 6 feet away from HVAC registers. Note that whenever the unit is powered up, it will take approximately one minute to begin normal operation. ELECTRICAL Line Voltage Power Consumption Operational Frequency Wire Designation Load Rating
120-230-277 VAC 120V - 100mW 277V - 250mW 50/60Hz Line - Black, Load - Blue, Ground - Green No neutral required Fluorescent: 1200VA @ 120V, 2700VA @ 277V Incandescent: 800W @ 120V Motor: 1/4 HP @ 120V
ENVIRONMENTAL
ODS10
Operating Temperature Range Storage Temperature Range Relative Humidity
32°F to 122°F (0°C to 50°C)
14°F to 185°F (-10°C to 85°C)
20% to 90% non-condensing
OTHER Listings
Warranty
UL Listed/CSA Certified, CA Title 20/24, Compliant, Complies with FCC Regulations, NOM Certified Limited Five-Year Warranty
ORDERING INFORMATION CAT. NO.*
DESCRIPTION
ODS10-ID
Decora Wall Switch Occupancy Sensor
To indicate color, add suffix to the end of the catalog number. White (-W) , Ivory (-I), Light Almond (-T), Gray (-G), Ebony (-E), and Red (-R). *NAFTA compliant and Made in USA models available.
Leviton Manufacturing Co., Inc. Global Headquarters
201 N. Service Rd. Melville, NY 11747-3138 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
20497 SW Teton Avenue, Tualatin, OR 97062 • Tel: 1-800-736-6682 • FAX: 503-404-5594 • Tech Line (6:00AM-4:00PM P.S.T. Mon-Fri): 1-800-959-6004
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les © 2014 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-8333B/C14-aa REV MAR 2014
PRODUCT DATA
ODS0D-ID-TD
BASIC OPERATION The ODS0D uses passive infrared (PIR) technology to monitor a room for occupancy through a segmented Fresnel lens. This specialized lens divides the field-ofview into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches two separate lighting loads ON. The lights will remain ON as long as there is an occupant moving through the sensor zones. The ODS0D-TD has an adjustable 30 minute time delay setting for the first and second relay to comply with CEC Title 24. The second relay is manual-ON only. APPLICATIONS Leviton’s ODS0D Dual-Relay Decora Wall Switch Passive Infrared (PIR) Occupancy Sensor is used to provide automatic lighting control for energy savings and convenience in a variety of commercial applications, including: • Classrooms • Conference rooms • Offices • Multimedia rooms • Day care centers • Lounges • Daylight harvesting • Bi-level or A/B switching The ODS0D provides automatic switching of two separate lighting loads from a single unit. It is compatible with incandescent, fluorescent and low-voltage lighting. The unit features dual manual-override switches that can be used to toggle the ON/OFF status of each lighting load while an area is occupied. The ODS0D can be installed in place of two single-pole wall switches and fits in a standard single-gang wall box. The unit requires a ground connection for proper operation.
FEATURES • Provides automatic switching for two separate banks of fluorescent, incandescent, or low-voltage lighting from a single unit. • Convenient dual pushbuttons provide manual-ON/ OFF light switching of each load at any time. • ODSOD-ID Conference Room Mode—primary and secondary relays switch lighting to last ON/OFF status when personnel enter room, providing a consistent lighting level from one occupancy period to the next. Both relays respond to Ambient Light Override, preventing lights from turning ON automatically during periods of ample natural light, for increased energy savings. • ODS0D-ID Classroom Mode—both primary and secondary relays always switch lighting ON when personnel enter room, regardless of their ON/OFF status during last period of occupancy. Secondary relay only responds to Ambient Light Override—primary does not, ensuring that students and personnel never enter a darkened room. • Presentation Mode feature for slide or film presentations allows push buttons to turn lights OFF and keep them OFF while the room is occupied. • Auto adapting delayed-OFF time interval compensates for real-time occupancy patterns, preventing unnecessary ON/OFF switching. • Exclusive Walk-Through feature provides increased energy savings by not leaving the lights ON for an extended period after only momentary occupancy. • Non-Adaptive Mode disables Self-Adjusting DelayedOFF Time and Walk-Through feature in applications where these features are not desired. • Daylight harvesting light sensor measures the ambient light in the room when it first detects motion. It leaves the lights OFF if there is enough light in the room or turns the lights connected to the first relay ON if there is not enough light in the room. • Low-profile design eliminates obtrusive “scanningdevice” look. Elegant Decora wallplates complement any interior for sleek aesthetics; uses Decora wallplates and coordinates with Leviton’s popular line of Decora wiring devices. • 180° field-of-view provides approximately 2100 square feet of coverage, suitable for a variety of commercial areas. • Segmented Fresnel lens provides optimum sensitivity and performance. Designed with an extensive “minor motion” area where even slight body movements will be detected. • Patented blinders: horizontal field-of-view may be adjusted between 180° and 60° arc by using integral blinders located on either side of the lens. No mask-
continued …
Leviton Mfg. Co., Inc. Lighting & Energy Solutions 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
1
ODS0D
Dual-Relay Decora® Wall Switch PIR Occupancy Sensor
PRODUCT DATA ing tape required. • Time delay adjustment for delayed-OFF time settings of 30 seconds, 5, 10, and 30 minutes. Allows customized adjustments to maximize energy savings. • Vandal resistant PIR lens. • False detection circuitry. • Light Sensor adjustable Ambient Light Override ranges from approximately 2FC (20 LUX) to 500+FC (5000+ LUX). • Manual-ON/auto-OFF mode for installations where manualON switching is required but auto-OFF switching is still desired for CEC Title T24 energy savings. • To comply with CEC Title 24, red LED indicator light flashes when PIR sensor detects motion to verify detection is active. • Beep warn - unit beeps 3 times after delayed-OFF time
expires, then waits 10 seconds before turning lights OFF. • One unit can be used for 120V through 277V lighting. Compatible with both electronic and magnetic ballasts. • Primary relay switches at the zero crossing point of the AC power curve to ensure longer contact life and compatibility with electronic ballasts. • Unit fits in standard single-gang wallbox and replaces two single-pole wall switches; ground connection required. Gangable with other devices. • Exclusive Leviton H.I.S. Circuitry. Specifically designed to handle today’s high inrush electronic ballast loads and offer unmatched durability and service.
ODS0D
OPERATION IN CONFERENCE ROOM MODE (ODS0D-ID) Lighting status Ambient Light Room vacant, delayed-OFF during occupancy Override time expires. Lighting status when personnel re-enter darkened room
Room vacant, delayed-OFF time expires. Lighting status when personnel re-enter room with ample natural lighting
1
Primary: ON Not Set Secondary: ON
Primary: ON Secondary: ON
Primary: ON Secondary: ON
2
Primary: ON Set Secondary: ON
Primary: ON Secondary: ON
Primary and Secondary remain OFF due to light override
3
Primary: ON Not Set Secondary: OFF
Primary: ON Secondary: OFF
Primary: ON Secondary: OFF
4
Primary: ON Set Secondary: OFF
Primary: ON Secondary: OFF
Primary and Secondary remain OFF due to light override
5
Primary: OFF Not Set Secondary: ON
Primary: OFF Secondary: ON
Primary: OFF Secondary: ON
6
Primary: OFF Set Secondary: ON
Primary: OFF Secondary: ON
Primary and Secondary remain OFF due to light override
7
Both Primary and Not Set Secondary turned OFF for viewing mode
Primary: ON Secondary: OFF
Primary: ON Secondary: OFF
8
Both Primary and Set Secondary turned OFF for viewing mode
Primary: ON Secondary: OFF
Primary and Secondary remain OFF due to light override
OPERATION IN CLASSROOM MODE (ODS0D-ID)
Lighting status Ambient Light Room vacant, delayed-OFF during occupancy. Override time expires. NOTE: Previous Lighting status when personnel status does not re-enter darkened room in Class Room Mode
1 Not applicable Not Set
Primary: ON Secondary: ON
2* Not applicable Set Primary: ON Secondary: ON *Example Number 2, with the Ambient Light Override set, is more typical of the Classroom Mode.
Room vacant, delayed-OFF time expires. Lighting status when personnel re-enter room with ample natural lighting Primary: ON Secondary: ON Primary: ON Secondary: OFF (Secondary responds to light override
FIELD-OF-VIEW The ODS0D provides a 180° field-of-view with a maximum coverage area of approximately 2100 square feet. The maximum sensing distance in front of the sensor is 40 feet, and at each side is 30 feet. The “minor motion” zone detects relatively small body movements and allows the lights to stay ON even though a person may not be moving or walking around the room. The remainder of the field-of-view, the “major motion” zone, exhibits a lesser degree of sensitivity and requires larger movements.
INSTALLATION The ODS0D is designed to control two separate lighting loads for bi-level or A/B switching (inner and outer banks of fluorescent lighting or separate banks of incandescent lighting) in the area it is monitoring. The light sensor Ambient Light Override is an important energy-saving, daylight harvesting feature that also distinguishes the functioning of the Conference Room and Classroom modes (see “Operation Modes”). The Ambient Light Override should always be adjusted during the time of day when the ambient light is at a level where no additional lighting is required. Exclusive auto-adapting operating features will automatically compensate for real-time occupancy patterns to provide maximum convenience and energy savings.
40 TO P VIEW 30 TO P VIEW 30
The ODS0D mounts in a standard single-gang wallbox and will replace two single-pole wall switches that control two separate lighting loads. The unit must be properly grounded in order to operate. The unit’s patented integral blinders may be used to restrict the field of view to prevent unwanted detection of hallway traffic. No masking tape required.
15 15
0 0
15 15
30 40 5 4 0
30
M inor M otion,IR
M inor M otion,IR
SID E VIEW SID E VIEW 5 4 0 0 0 15 15
O D SXX-ID
O D SXX-ID
40
40
ODS0D-ID/-TD Field-of-View (in feet)
O D S0D
WIRING DIAGRAMS
H ot(B lack) Phase 1
Line 120-230-277VAC , 60H z
B lack Line 120-230-277VAC , 60H z
O D S0D
R ed
H otO(BDlack) S0D Phase 1 R ed
N eutral(W hite)
The ODS0D should be positioned at least 6 feet away from HVAC registers. The switch located under the push-button provides three operational settings: “ON” turns the lighting load ON indefinitely (motion detection not active), “OFF” disconnects the lighting load from the power for relamping purposes, and “AUTO” activates automatic motion detection. Note that whenever the unit is powered up, it will take approximately 1 minute to begin normal operation.
M ajor M otion,IR
M ajor M otion,IR
40
B lack R ed B lue
G reen G round N eutral(W hite)
Prim ary Load
Hot (Black) Phase 1 Prim ary Load
Secondary Load
N ote:G round m ustbe connected
ODS0D-ID Wiring Diagram for Single Pole Application—Single Phase N ote:G round m ust be connect ed
R ed
H ot(B lack) ODS0D Phase 1 Red (To Phase 2)
R ed B lue
G reen G round
ODS0D
40
Secondary Load
R ed
B lack Red
Black Line 120-230-277VAC , 60H z
Line 120-230-277VAC, 50/60Hz
Neutral (White)
B lue
Blue
Green Ground N eutral(W hite)
G reen G roundPrimary Load
Prim ary Load Secondary Load
N ote:G round m ustbe connected
ODS0D-ID Wiring Diagram for Single Pole Application—2 Phase
Leviton Mfg. Co., Inc. Lighting & Energy Solutions 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
3
Secondar Load
PRODUCT DATA SPECIFICATIONS
DIMENSIONAL DIAGRAMS
ELECTRICAL
1.75 (44.4 mm)
Line Voltage
120-230-277 VAC
Power Consumption
120V - 110mW 277V - 270mW
Operational Frequency
50/60Hz
Wire Designation
Primary Relay— No. 16 AWG leads: Line—Black Load—Blue Ground—Green
Secondary Relay— N0. 18 AWG isolated contact leads: (2) Red
Load Rating
Primary Relay— Fluorescent: 1200VA @ 120V 2700VA @ 277V Incandescent: 800W @ 120V
Secondary Relay— Fluorescent: 800VA @ 120V 1200VA @ 277V Incandescent: 800W @ 120V
0.48 (12.6 mm)
1.30 (33.0 mm)
OFF
AUTO
2.60 (66.2 mm)
4.06 (103.2 mm)
2.61 (66.3 mm)
1.35 (34.4 mm)
ON
BOTTOM
ENVIRONMENTAL Operating Temperature Range
32°F to 122°F (0°C to 50°C)
Storage Temperature Range
-50°F to 185°F (-10°C to 85°C)
Relative Humidity
20% to 90% non-condensing
Mounting Yoke Vandal Resistant PIR Lens
OTHER Listings
CUL/US Certified, CEC Title 24 Compliant FCC Compliant
Warranty
Limited Five-Year Warranty
Patented Blinders
1
2
4
7
4
7
Control Panel, Cover Removed
3 10 10 TIME RANGE LIGHT
ODS0D
ORDERING INFORMATION CAT. NO.*
DESCRIPTION
ODS0D-ID
Dual-Relay Decora Wall Switch Occupancy Sensor for 120/277 VAC applications CEC Title 24 Compliant Dual-Relay Decora Wall Switch Occupancy Sensor for 120/277 VAC applications
ODS0D-TD
Pushbutton 2
LED Window & Light Sensor Pushbutton 1 OFF AUTO
ON
BOTTOM
Service Switch
* To indicate color, add suffix to the end of the catalog number. White (-W), Ivory (-I), Light Almond (-T), Gray (-G), Ebony (-E), and Red (-R) NAFTA and Made in USA models available.
SPECIFICATION SUBMITTAL JOB NAME: JOB NUMBER:
CATALOG NUMBERS:
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-8318A/K11-tb REV NOV 2011
PRODUCT DATA
Decora® Wall Switch Multi-Technology Occupancy Sensor
OSSMT-MD/GD
The PIR sensors provide immunity to false ON through a specialized Fresnel lens which divides the field-ofview into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights ON. The Ultrasonic (U/S) sensors provide maximum sensitivity and range in difficult spaces with irregular shaped rooms and partitions that can block the PIR field-of-view. A pair of U/S sensors will detect Doppler shifts caused by motion in a space preventing false OFF. These sensors are more sensitive to small movements since they do not rely on zones.
SELF-ADAPTIVE TECHNOLOGY Designed for “install and forget” use, the OSSMT automatically analyzes room conditions and adapts to errors or changing environment. HOW THE OSSMT-MD AUTOMATICALLY ADAPTS CONDITION
EXAMPLE
ADAPTIVE REACTION
False-ON: Sensor incorrectly turns the lights ON.
The sensor detects movement in the corridor or hallway and the room light turns ON.
After an initial movement is sensed, if another movement is not sensed within the timer setting the delayed off-time setting is automatically reduced.
False-OFF: Sensor incorrectly turns the lights OFF.
The sensor does not detect movement because an occupant is virtually motionless and the lights turn OFF.
If motion is detected shortly after the lights go OFF, the current delayed offtime setting is increased.
APPLICATIONS Leviton’s OSSMT Multi-Technology Decora Wall Switch Occupancy Sensor is used to provide automatic lighting control for energy savings and convenience in a variety of commercial applications: • Retrofit • Private and executive offices • Conference rooms • Storage areas • Restrooms • Classrooms • Lounges • Training areas • Multi-location switching (similar to 3-way) Leviton Mfg. Co., Inc. Lighting & Energy Solutions 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSSMT
BASIC OPERATION Occupancy sensors have two tasks: keeping the lights ON while the space is occupied and turning the lights OFF when unoccupied.
FEATURES • Fast, simple Installation: Fits in a standard wall box and replaces a single-pole wall-switch; neutral and no neutral options available. Sensor can be ganged together with other units in a multiple-switch wall plate. • Low-profile design eliminates obtrusive “scanning-device” look. Elegant Decora wallplates complement any interior for sleek aesthetics; uses Decora wallplates and coordinates with Leviton’s popular line of Decora wiring devices. • Convenient Pushbutton provides manual-ON/OFF light switching at any time. • Segmented Fresnel lens provides optimum sensitivity and performance. Designed with an extensive “minor motion” area where even slight body movements will be detected. • Vandal resistant PIR lens. • Patented Blinders: Adjustable horizontal field-of-view (PIR may be adjusted between 180° and 60° of arc by using integral blinders located on either side of the lens). No masking required. • Manual-ON/auto-OFF mode for installations where manual-ON switching is required but auto-OFF switching is still desired for CEC Title 24 energy savings. • To comply with CED Title 24, LED indicator light flashes when sensor detects motion to verify detection is active. Green flashes for ultrasonic, red flashes for PIR. • Time: The delayed OFF time is preset at 30 minutes in the Auto Adapting mode. A choice of four delayed-OFF time settings are available: 30-seconds (for walking test purposes only), 10, 20, and 30 minutes for fixed time and auto adapting. The LED will flash when the adjusting knob is set to the indicated time value. • Ambient Light Recognition: Integrated light sensor prevents lights from turning on when the room is adequately illuminated by natural light. • Self-Adaptive Technology: Callbacks for adjustment are eliminated. Time delay and sensitivity settings are continually adjusted to occupant patterns of use in auto adapt mode. • Exclusive Walk-through Feature provides increased energy savings by not leaving the lights ON for an extended period after only momentary occupancy. • Vacancy Confirmation: When the time out expires and the relays turn OFF, a 30 second (OSSMT-G) or 40 second (OSSMT-M) vacancy confirmation exists to turn the relays back on. • False detection circuitry. • Small Motion Sensitivity (U/S): Ultrasonic technology provides excellent minor motion sensitivity. • Ability to disable U/S (OSSMT-M). For added flexbility, OSSMT-G has the ability to disable both PIR and U/S. • Presentation Mode feature: For slide or film presentations, allows pushbuttons to turn lights OFF and keep them OFF while the room is occupied. • Exclusive Leviton H.I.S. Circuitry. Specifically designed to handle today’s high inrush electronic ballast loads and offer unmatched durability and service. • True Zero-Cross Relay switches at the zero crossing point of the AC power curve to ensure maximum contactor life and compatibility with electronic ballasts.
FIELD-OF-VIEW The OSSMT provides a 180° field-of-view with a maximum coverage area of approximately 2400 square feet. The maximum sensing distance in front of the sensor is 40 feet, and side to side is 30 feet. The “minor motion” zone detects relatively small body movements and allows the lights to stay ON even though a person may not be moving or walking around the room. The remainder of the field-ofview, the “major motion” zone, exhibits a lesser degree of sensitivity and requires larger movements. TOP VIEW
30 20
0
20 30 5 4 0
SIDE VIEW 0
20
40
Major Motion, PIR
Major Motion, U/S
Major Motion, PIR
Major Motion, U/S
Minor Motion= Dual Technology coverage. This also represents the
maximum ultrasonic range coverage. DIMENSIONAL DIAGRAMS
1.85in 46.99mm
1.75in 44.45mm
.5in/12.62mm 1.35in 34.37mm
2.65in 67.26mm
4.06in 103.12mm
Mounting Yoke Vandal Resistant PIR Lens Patented Masking Blinders 2.60 (66.2 mm)
OSSMT
PRODUCT DATA
Control Panel, Cover Removed 1
2
4
7
4
7
3 10 10 TIME RANGE LIGHT
LED & Light Sensor
Pushbutton BOTTOM
Ultrasonic Sensors
INSTALLATION The OSSMT is preset to deliver optimum performance in a wide variety of applications without requiring any adjustments during installation. Exclusive self-adjusting operating features will automatically compensate for real-time occupancy patterns to provide maximum convenience and energy savings. The unit may replace a single-pole wall switch mounted in a standard wall box. The OSSMT-MD must have a neutral and be properly grounded in order to operate. The OSSMT-GD does not require a neutral for installation. The unit’s integral blinders may be used to restrict the field of view to prevent unwanted detection of traffic. It should be positioned at least 6 feet away from HVAC registers. Note that whenever the unit is powered up, it will take approximately 1 minute to begin normal operation.
WIRING DIAGRAM
Line 120-230-277/347VAC 50/60Hz
OSSMT-MD Wall Switch Occupancy Sensor Wiring Diagram, Single Location Control
SPECIFICATIONS ELECTRICAL Line Voltage
120-230-277/347 VAC PIR only
120V 277V 347V
390mW 480mW 500mW
190mW 270mW 350mW
OSSMT-GD
120V 277V
110mW 340mW
70mW 310mW
Operational Frequency
50/60Hz
Ultrasonic Operating Frequency
40kHz
Wire Designation
Line-Black Neutral-White Load-Blue Ground-Green
Load Rating
Incandescent/Tungsten: 800W @ 120V Fluorescent: 1200VA @ 120V 2700VA @ 277V , 1500VA @ 347V Motor: 1/4 HP @ 120V,
OSSMT-MD
ENVIRONMENTAL Operating Temperature Range Storage Temperature Range Relative Humidity
32°F to 104°F (0°C to 40°C) 14°F to 185°F (-10°C to 85°C) 20% to 90% non-condensing
OTHER Listings Warranty
OSSMT-MD = Ul/cUL OSSMT-GD = ETL/cETL Listed, CSA OSSMT-M3 = cETL Listed, CSA CEC Title 24 Compliant, FCC Compliant Limited Five-Year Warranty
Line 120-230-277VAC 50/60Hz
Note: Ground wire must be connected. OSSMT-GD Wall Switch Occupancy Sensor Wiring Diagram, Single Location Control
Sensor 1
Black (Hot)
Black
Sensor 2
Blue
DESCRIPTION
OSSMT-MDx OSSMT-GDx
Multi-Technology Wall Switch Occupancy Sensor No Neutral, Multi-Technology Wall Switch Occupancy Sensor
OSSMT-M3x
Multi-Technology Wall Switch Occupancy Sensor 347V
Black Load Green Ground
Green Ground
Neutral (White)
Note: Ground wire must be connected. OSSMT-GD Wall Switch Occupancy Sensor Wiring Diagram, Two Location Control
* Replace x with (W) White, (I) Ivory, (T) Light Almond, (G) Gray, Ebony (-E), or Red (-R) NOTE: OSSMT-M3x model available in (W) White and (I) Ivory only. * NAFTA compliant and Made in USA models available.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Black
Line 120-230-277VAC 50/60Hz
ORDERING INFORMATION CAT. NO. *
Blue
White
OSSMT
U/S & PIR
Power Consumption
OSSMT
PRODUCT DATA
LEVITON SPECIFICATION SUBMITTAL JOB NAME: JOB NUMBER:
CATALOG NUMBERS:
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice
G-7357D/K11-tb REV NOV 2011
PRODUCT DATA
Dual Relay Decora® Wall Switch Multi-Technology Occupancy Sensors
OSSMD-FT
BASIC OPERATION The PIR is used to detect motion and turn lights ON, while either technology is used to keep lights ON while occupied. This allows the Ultrasonic (U/S) to be set to higher sensitivity levels minimizing false OFF conditions. The PIR portion gives immunity to false ON through a specialized lens that divides the field-ofview into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the primary lighting load ON while the secondary relay operaties in manual-ON/auto-OFF (MD/ GD models). With the FT models, both relays operate in auto-ON/auto-OFF. The lights will remain ON as long as there is an occupant moving through the sensor zones. The U/S sensors give maximum sensitivity and range in difficult spaces with irregular shaped rooms and partitions that can block the PIR field-of-view. The OSSMD also features the ability to turn off PIR or U/S to become a single tech device. APPLICATIONS • Private and Executive offices • Conference rooms • Daylight harvesting • Classrooms • Restrooms • Storage areas • Training areas • Multimedia rooms • Day care centers • Lounges • Retrofits • Bi-level or A/B switching • Multi-location switching (similar to 3-way)
The OSSMD provides automatic lighting control for two separate loads from a single unit. It is compatible with incandescent, fluorescent, low-voltage lighting, and fan loads. The unit features dual manual-override switches that can be used to toggle the ON/OFF status of each lighting load while an area is occupied. The OSSMD can be installed in place of two single-pole wall switches and fits in a standard single-gang wall box. To comply with CEC Title 24, the second relay is a manual-ON only. The OSSMD-FT is a Leviton exclusive model which also provides automatic switching of two spearate loads from a single unit. The unit features a single manual override switch for the first relay. The second, “fan relay”, is an auto-ON with relay 1 and has an extended time delay of 10 minutes after relay 1. This provides both energy efficiency and optimum ventilation control from a single device.
HOW THE OSSMD AUTOMATICALLY ADAPTS CONDITION
EXAMPLE
ADAPTIVE REACTION
False-On: Sensor incorrectly turns the lights ON.
The sensor detects movement in the corridor or hallway and the room light turns ON.
After an initial movement is sensed, if another movement is not sensed within the timer setting the delayed off-time setting is automatically reduced.
False-Off: Sensor incorrectly turns the lights OFF.
The sensor does not detect movement because an occupant is virtually motionless and the lights turn OFF.
If motion is detected shortly after the lights go off, the current delayed offtime setting is increased.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSSMD
OSSMD-MD/-GD
OSSMD
PRODUCT DATA FEATURES • Provides automatic lighting control for two separate banks of fluorescent, incandescent, or lowvoltage lighting from a single unit. • The second relay is a manual-ON only with a maximum 30 minute time-out for maximum energy savings to comply with CEC Title 24 • The OSSMD-FT is intended to control a light circuit and a fan. The button on the sensor provides ON control for both circuits and OFF for lighting circuits only. The sensor will automatically turn ON both when occupancy is detected. When no movement is detected, the primary relay will turn OFF after the delay OFF time expires. The fan will remain ON to clear the airspace for an additional 10 minutes after the time-out or button press. • Fits in a standard single-gang wall box and replaces two single-pole wall-switches for fast and easy installation; neutral and ground connection required for OSSMD-MD and OSSMD-FT. OSSMD-GD does not require a neutral for installation. • Low-profile design eliminates obtrusive “scanningdevice” look. Elegant Decora wallplates complement any interior for sleek aesthetics; uses Decora wallplates and coordinates with Leviton’s popular line of Decora wiring devices. • 180° field-of-view provides approximately 2400 square feet of coverage, suitable for a variety of commercial areas. • Convenient pushbuttons provide manual-ON/OFF light switching of each load at any time. • Segmented Fresnel lens provides optimum sensitivity and performance. Designed with an extensive “minor motion” area where even slight body movements will be detected. • Vandal resistant PIR lens. • Patented blinders - adjustable horizontal field-ofview (PIR) may be adjusted between 180° and 60° of arc by using integral blinders located on either side of the lens. No masking tape required. • Manual-ON/auto-OFF mode for installations where manual-ON switching is required but auto-OFF switching is still desired for CEC Title 24 energy savings. • To comply with CEC Title 24, LED indicator light flashes when sensor detects motion to verify detection is active. Green flashes for ultrasonic, red flashes for PIR. • Time delay adjustment for delayed-OFF time settings of 30 seconds (for walking test), 10 minutes, 20 minutes, and 30 minutes. Allows customized adjustments to maximize energy savings. • Light sensor measures the ambient light in the room when it first detects motion and leaves the lights OFF (hold-off) if there is enough light in the room or turns the lights connected to the first relay ON if there is not enough light in the room.
• Self-Adaptive technology eliminates callbacks for adjustments. Time delay and sensitivity settings are continually adjusted to occupant patterns of use in auto adapt mode. • Exclusive Walk-Through feature provides increased energy savings by not leaving the lights ON for an extended period after only momentary occupancy. • Non-Adaptive Mode disables self-adjusting delayedOFF time and walk-through feature in applications where these feature are not desired. Optional manual adjustment for delayed-OFF time settings allows customized adjustments to maximize energy savings. • Vacancy confirmation; when the time out expires and the relay turns OFF, a 30-second vacancy confirmation exists to turn the relays back ON. • False detection circuitry. • U/S technology provides excellent minor motion sensitivity. • Ability to disable PIR or U/S for added flexibility. • Presentation Mode feature for slide or film presentations allows pushbuttons to turn lights OFF and keep them OFF while the room is occupied. • Exclusive Leviton High Inrush Stability (H.I.S.) Circuitry. Specifically designed to handle today’s high inrush electronic ballast loads and offer unmatched durability and service. • One unit can be used for 120V through 277V lighting. Compatible with both electronic and magnetic ballasts. • True zero-cross relay switches at the zero crossing point of the AC power curve to ensure maximum contactor life and compatibility with electronic ballasts.
20
0
20 30 5 4 0
INSTALLATION The OSSMD mounts in a standard single-gang wall box and replaces two single-pole wall switches that control two separate lighting loads. The unit must be properly grounded in order to operate. The unit’s integral blinders may be used to restrict the field-of-view to prevent unwanted detection of hallway traffic. The OSSMD should be positioned at least 6 feet away from HVAC registers. Note that whenever the unit is powered up, it will take approximately 1 minute to begin normal operation.
SIDE VIEW 0
20
40
Major Motion, PIR
Major Motion, U/S
Major Motion, PIR
Major Motion, U/S
OSSMD Field-of-View (in feet) Minor Motion= Dual Technology coverage. This also represents the maximum ultrasonic range coverage.
Sensor 1
Sensor 2 Red
Red Hot (Black) Phase 1
Black White
Line 120-230-277VAC 60Hz
Black Red Blue
Secondary Load
Red Blue White Green Ground
Green Ground
Primary Load
Neutral (White)
MULTI-LOCATION
OSSMD
FIELD-OF-VIEW The OSSMD provides a 180° field-of-view with a maximum coverage area of approximately 2400 square feet. The maximum major motion sensing distance in front of the sensor is 40 feet, and side to side is 30 feet. The “minor-motion” zone detects relatively small body movements and allows the lights to stay ON even though a person may not be moving or walking around the room. This zone is approximately 40 feet by 20 feet.
TOP VIEW
30
WIRING DIAGRAMS Sensor
Sensor
Red
H Phase 1
Black White Line 120-230-277VAC 50/60Hz
Red
H Phase 1
Red
Black Blue
Red Blue
Load
Load
Line 120-230-277VAC 50/60Hz
Load
Ground
Neutral (White)
Ground
Neutral (White)
Note: Ground wire must be connected.
OSSMD-MD/OSSMD-FT
OSSMD-GD
Leviton Mfg. Co., Inc. Lighting & Energy Solutions 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Load
PRODUCT DATA SPECIFICATIONS
DIMENSIONAL DIAGRAMS
ELECTRICAL
Operational Frequency U/S Operating Frequency Wire Designation
Load Rating
1.75in/44.4mm
120-230-277 VAC -FT 120V 220mW 277V 430mW 50/60Hz
-MD 210mW 410mW
0.48in/12.6mm
1.30in/33.0mm
1.35in/34.4mm
40kHz Primary RelayNo. 16 AWG leads: Line-Black Load-Blue Ground-Green White-Neutral (where provided) Primary Relay: Fluorescent: 1200VA @ 120V 2700VA @ 277V Incandescent: 800W @ 120V
ENVIRONMENTAL
1.75 (44.4 mm)
Operating Temperature Range 1.30
(33.0 mm)
Storage Temperature Range Relative Humidity
Secondary RelayNo. 16 AWG isolated contact leads: (2) Red
Secondary Relay: Fluorescent: 800VA @ 120V 1200VA @ 277V Incandescent: 800W @ 120V Motor: 1/4 HP
BOTTOM
Mounting Yoke
32°F to 104°F (0° C to 40° C)mm) 0.48 (12.6 -50°F to 185°F (-10° C to 85° C) 20% to 90% non-condensing 1.35
Vandal Resistant PIR Lens
(34.4 mm)
OTHER
ETL/cETL Listed, CSA, CEC Title 24 Compliant, FCC Compliant, NOM
Warranty
Limited Five-Year Warranty
Patented Masking Blinders 2.60 (66.2 mm)
ORDERING INFORMATION
2.61 (66.3 mm)
Listings
4.06 (103.2 mm)
OSSMD
-GD 140mW 360mW
2.60in/66.2mm
Line Voltage Power Consumption
Control Panel, Cover Removed 1
2
4
7
4
7
3 10 10 TIME RANGE LIGHT
LED and Light Sensor
Ultrasonic Sensors Pushbutton 2 *
CAT. NO.*
DESCRIPTION
OSSMD- MD
Dual Relay Multi-Tech Wall Switch Occupancy Sensor
OSSMD- GD
No Neutral, Dual Relay Multi-Tech Wall Switch BOTTOM Occupancy Sensor
OSSMD- FT
Dual Relay Multi-Tech Wall Switch Occupancy Sensor with 10-minute Delayed-OFF for Second Relay
Pushbutton 1 BOTTOM
* Not present in OSSMD-FT
* To indicate color, add suffix to the end of the catalog number. White (-W), Ivory (-I), Light Almond (-T), Gray (-G), Ebony (-E), and Red (-R) * NAFTA compliant and Made in USA models available.
LEVITON SPECIFICATION SUBMITTAL JOB NAME: JOB NUMBER:
CATALOG NUMBERS:
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-8013C/K11-tb REV NOV 2011
PRODUCT DATA
Decora® Wall Switch PIR Occupancy Sensor with LED NightLight
NightLight High Level
BASIC OPERATION The passive infrared (PIR) sensor detects motion from a heat-emitting source within its field-ofview to automatically switch lights ON and OFF, offering the same performance features as the ODS family of occupancy sensors. OSSNL has the ability to reduce (dim) and turn off the “Guide Light” function with a simple dial setting. The LED NightLight consumes less than 1/2 W providing energy savings and guide lighting when room lights are off. APPLICATIONS OSSNL is perfect for use in hospitality and health care facilities with either auto-ON or manual-ON settings with adjustable time delay settings of 30 seconds to 2 hours. The NightLight Occupancy Sensor Wall Switch can be used to provide automatic lighting control for energy savings and convenience in a variety of commercial applications, including: • Hotel restrooms • Conference rooms • Small offices • Storage areas
• Hospital restrooms • Classrooms • Lounges • Bathrooms
FEATURES
• Fits in standard wallbox and replaces single-pole wall switch; ground and neutral connection required. Gangable with other units. • Low-profile design eliminates obtrusive “scanningdevice” look. Elegant Decora wallplates complement any interior for sleek aesthetics; uses Decora wallplates and coordinates with Leviton’s popular line of Decora wiring devices. • 180° field-of-view provides approximately 2100 SF of coverage. • Convenient pushbutton provides manual-ON/OFF light switching at any time. • Two dual element PIR sensors used to widen detection range. • Segmented Fresnel lens provides optimum sensitivity and performance. Designed with an extensive “minor motion” area where even slight body movements will be detected. • Vandal resistant PIR lens. • Patented blinders - horizontal field-of-view may be adjusted between 180° and 60° of arc by using integral blinders located on either side of the lens. No masking tape required. • Manual-ON/auto-OFF mode for installations where manual-ON switching is required but auto-OFF switching is still desired for CEC Title 24 energy savings.
Leviton Mfg. Co., Inc. Lighting & Energy Solutions 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSSNL
NightLight Off
PRODUCT DATA
OSSNL
FEATURES CONT.
• To comply with T24, red LED indicator light flashes when sensor detects motion to verify detection is active. • Time Delay adjustment for delayed-OFF time settings of 30 seconds (for walking test), 10 minutes, 20 minutes, and 30 minutes. Allows customized adjustments to maximize energy savings. • Light Sensor Adjustable Ambient Light Override ranges from approximately 2 foot-candles (20 lux) to 500+ foot-candles (5000+ lux) to prevent lights from turning ON automatically during periods of ample natural light, increasing energy savings. • Light sensor enables the load hold-OFF feature once level has been set. • Vacancy confirmation - when the time out expires and the relays turn OFF, a 30 second vacancy confirmation exists to turn the relays back ON. • False detection circuitry. • Presentation Mode feature for slide or film presentations allows push buttons to turn lights OFF and keep them OFF while the room is occupied. • LED NightLight offers “Guide Light” functionality. • Adjustable NightLight illumination setting for continuous or dimmed NightLight. • NightLight Mode - the factory default setting for the NightLight Mode is Dimmed Mode. This means the NightLight will automatically dim to 5% of full brightness after 2 minutes of no occupancy when activated by the internal light sensor. • One unit can be used for 120V through 277V lighting. Compatible with both electronic and magnetic ballasts. • Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts. • Exclusive Levition H.I.S. Circuitry. Specifically designed to handle today’s high inrush electronic ballast loads and offer unmatched durability and service.
FIELD OF VIEW The OSSNL provides a 180° field of view with a maximum coverage area of approximately 2100 square feet. The maximum sensing distance in front of the sensor is 40 feet, and at each side is 30 feet. A “minor-motion” zone detects relatively small body movements and allows the lights to stay ON even though a person may not be moving or walking around the room. The remainder of the field of view, the “major-motion” zone, exhibits a lesser degree of sensitivity and requires larger movements. 40 TO P VIEW 30
15
0
15
30 40 5 4 0
M ajor M otion,IR
M inor M otion,IR
SID E VIEW
0
15
40
OSSNL Field-of-View (in feet)
O D SXX-ID
INSTALLATION The OSSNL is preset to deliver optimum performance in a wide variety of applications without requiring any adjustments during installation. The unit may replace a single-pole wall switch mounted in a standard wall box. The unit must have a neutral and be properly grounded in order to operate. The unit’s integral blinders may be used to restrict the field-of-view to prevent unwanted detection of hallway traffic. It should be positioned at least 6 feet away from HVAC registers. Note that whenever the unit is powered up, it will take approximately 1 minute to begin normal operation. OSSNL/OSS10 Blue Black (Hot)
Black
Line 120-230-277VAC, 50/60Hz
White
Black Load
Green Ground
White
Neutral (White) OSSNL Wall Switch Occupancy Sensor Wiring Diagram, Single Location Control
DIAGRAMS Blinder adjustment levers
30M
1H
30S
4
7
4
AU
TO
10
2H TIM E
MA
N
BLINDERS
RANGE
ON MODE/NL DIM
Control Panel Cover
OSSNL Sensor Features
0.48 (12.6 mm)
2.60 (66.2 mm)
4.06 (103.2 mm)
2.61 (66.3 mm)
1.35 (34.4 mm)
Vandal Resistant Lens with PIR and LED Night Light LED Indicator and Light Sensor
Dimensions Night Light
Leviton Mfg. Co., Inc. Lighting & Energy Solutions 201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Patented Blinders Control Panel Cover Pushbutton
OSSNL
1.75 (44.4 mm) 1.30 (33.0 mm)
PRODUCT DATA SPECIFICATIONS ELECTRICAL Line Voltage
120-230-277VAC
Power Consumption
120V, Nightlight OFF - 190mW 120V, Nightlight ON max - 350mW 277V, Nightlight OFF - 250mW 277V, Nightlight ON max - 410mW
Operational Frequency
50/60Hz
Wire Designation
Line - Black Load - Blue Ground - Green Neutral - White
Load Rating
Fluorescent: 1200VA @ 120V, 2700VA @ 277V Incandescent: 800W @ 120V, Motor – 1/8 HP @ 120V
ENVIRONMENTAL Operating Temperature Range
32° to 122°F (0°C to 50°C)
Storage Temperature Range
14°F to 185°F (-10°C to 85°C)
Relative Humidity 20% to 90% non-condensing
OSSNL
OTHER Listings
CUL/US Certified, NOM CEC Title 24 Compliant, FCC Compliant
Warranty
Limited Five-Year Warranty
ORDERING INFORMATION CAT. NO. *
DESCRIPTION
OSSNL-IDx
Occupancy Sensor Wall Switch with NightLight
To indicate color, add suffix to the end of the catalog number. White (-W) , Ivory (-I), Light Almond (-T), Gray (-G), Black (-E) and Red (-R). *NAFTA compliant and Made in USA models available.
LEVITON SPECIFICATION SUBMITTAL JOB NAME: CATALOG NUMBERS: JOB NUMBER:
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/les © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-7543B/K11-tb REV NOV 2011
