04-Serie G-A_04-Serie G-A 06/11/14 13:56 Page8
G series Slide switches - telecom grade Distinctive features and specifications UG1410A
❑ Panel and PC mount models ❑ 6 actuator lengths ❑ Wide variety of contact materials
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load : - silver contacts (codes 1 or 2) : 3A 30VDC - gold plated brass contacts (code 0) : 0,4VA 20VAC or DC max. • Initial contact resistance : 10 mΩ • Insulation resistance : 1.000 MΩ min. • Dielectric strength : 1.000 Vrms 50 Hz min. • Electrical life with resistive load : - silver contacts (codes 1 or 2) : 2 positions : 40.000 cycles 3 positions : 20.000 cycles - gold plated brass contacts (code 0) : 60.000 cycles (0,4VA max.)
MATERIALS
E
GENERAL SPECIFICATIONS
• Case : PES • Actuator : polyamide, glass filled • Cover : stainless steel • Contacts 0 : brass, gold plated 1 : silver 2 : silver, gold plated 5 : special contact, lower rating, minimum quantity : consult factory • Terminal seal : epoxy
• Travel : 2,20 mm (.086), except actuator N on SP model : 2,60 mm (.102) • Operating temperature : -30°C to +85°C • Recommended soldering : 300°C 5 sec. max.
The company reserves the right to change specifications without notice. E-8
www.apem.com
APEM
04-Serie G-A_04-Serie G-A 06/11/14 13:56 Page9
G series Slide switches - telecom grade Overview
G
Actuators
SERIES
C H L B E N
3,50 mm (.137) 5,10 mm (.200) Standard 6,40 mm (.251) 7,65 mm (.301) 9,10 mm (.358) 9,50 mm (.374)
Number of poles 3 4
Terminals
Electrical functions
Single pole Double pole
6 9
ON ON
OFF
ON ON
S0 P0 W0 WW Y0 Y4
Types L, B and E for single pole models only.
Contact and terminal materials 0 1 2 5
Brass, gold plated Silver Silver, gold plated Special contact, lower rating
Special options 2
Special options 1 00 10 11 12
Standard model Switch without ground plate 10,35 mm (.407) PC terminals Same as 11, without ground plate
Solder lugs Straight PC Right angle, horizontal Right angle, vertical Straight PC with short bracket Straight PC with tall bracket
00 01 10 11
No epoxy seal Epoxy sealed terminals Extended terminals Same as 10, with epoxy seal
ABOUT THIS SERIES On the following pages, you will find successively : - model structure of switches - options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information.
Packaging unit : 100 pieces for SP solder lug (S0) and straight terminal (P0) models. 50 pieces for other models.
APEM
www.apem.com
E-9
E
04-Serie G-A_04-Serie G-A 06/11/14 13:56 Page10
G series Slide switches - telecom grade
1.10 (.043)
1.80 (.070)
4.00 (.157)
3
5.90 (.232)
2
4.20 (.165)
1
1.90 (.074)
• Solder lug, straight PC or right angle terminals • Single and double pole configurations
1.10 (.043)
MODEL STRUCTURE Shown with standard actuator (type H) 19.50 (.767)
0.50 (.019)
OFF
ON ON
7.60 (.299) 4.40 (.173) 9.50 (.374)
4.70 (.185)
4.75 (.187) 9.53 (.375)
www.apem.com
4.70 (.185)
3.85 (.151)
13.60 (.535)
3.30 (.129)
4.30 (.169)
Ø1.60 (.062 DIA) 4.70 (.185)
3.85 (.151)
4.70 (.185)
3.85 (.151)
1.30 (.051)
9.53 (.375)
0.80 (.031)
13.20 (.519)
E-10
5.10 (.200)
8.25 (.324) 1.17 (.046)
13.60 (.535)
0.50 (.019)
4.70 (.185)
4.70 (.185)
1.10 (.043)
0.50 (.019)
0.80 (.031)
12.70 (.500)
Single pole Double pole GH36W0 GH46W0 ON GH39W0 GH49W0 ON
0.80 (.031)
3.85 (.151)
Ø1.60 (.062 DIA)
4.70 (.185)
3.85 (.151)
3.85 (.151)
11.40 (.448)
Ø1.60 (.062 DIA)
4.70 (.185)
Right angle terminals - horizontal
1.10 (.043)
4.70 (.185)
4.70 (.185)
12.70 (.500)
12.70 (.500)
0.80 (.031)
10.55 (.415)
12.70 (.500)
3.81 (.150)
ON ON
4.00 (.157)
OFF
3.85 (.151)
5.10 (.200)
Single pole Double pole GH36P0 GH46P0 ON GH39P0 GH49P0 ON
6.65 (.261)
0.50 (.019)
4.00 (.157)
12.70 (.500)
0.80 (.031)
5.10 (.200)
Order with epoxy sealed terminals (option 01).
3.85 (.151)
6.10 (.240)
11.40 (.448) 12.70 (.500)
Straight PC terminals
0.30 (.011) 5.80 (.228)
3.85 (.151)
3.85 (.151)
6.35 (.250) 0.50 (.019)
4.20 (.165)
5.10 (.200)
ON ON
4.70 (.185)
3.85 (.151)
3.85 (.151)
0.80 (.031)
E
6.10 (.240)
4.70 (.185)
OFF
17.53 (.690)
2.40 (.094)
6.65 (.261)
17.53 (.690)
0.30 (.011)
Single pole Double pole GH36S0 GH46S0 ON GH39S0 GH49S0 ON
19.50 (.767) 2.40 (.094)
Solder lug terminals
5.70 (.224)
0.50 (.019) 13.20 (.519)
3.10 (.122)
Ø1.60 (.062 DIA) 4.70 (.185)
APEM
04-Serie G-A_04-Serie G-A 06/11/14 13:56 Page11
G series Slide switches - telecom grade
3.18 (.125) 4.70 (.185)
0.50 (.019)
4.70 (.185)
0.80 (.031)
0.50 (.019)
4.70 (.185)
7.50 (.295)
15.75 (.620)
Ø1.60 (.062 DIA)
11.40 (.448)
3.85 (.151)
E
3.85 (.151)
4.70 (.185) 0.80 (.031)
0.50 (.019)
15.75 (.620)
Ø1.60 (.062 DIA)
4.75 (.187)
15.75 (.620)
10.46 (.411)
0.40 (.015)
4.70 (.185)
4.75 (.187) 3.18 (.125)
4.75 (.187)
3.85 (.151)
13.65 (.537)
0.40 (.015)
15.75 (.620)
3.85 (.151)
4.70 (.185)
0.80 (.031)
ON ON
11.40 (.448)
3.85 (.151)
Ø1.60 (.062 DIA)
4.70 (.185)
OFF
3.18 (.125)
Single pole Double pole GH36Y4 GH46Y4 ON GH39Y4 GH49Y4 ON
3.81 (.150)
15.75 (.620)
7.50 (.295)
3.85 (.151)
12.70 (.500)
Ø1.60 (.062 DIA)
15.75 (.620)
Straight PC terminals - tall bracket : Y4
4.75 (.187)
4.70 (.185)
0.40 (.015)
15.75 (.620)
6.35 (.250)
14.90 (.586)
4.70 (.185) 0.50 (.019)
2.80 (.110)
9.20 (.362)
3.85 (.151)
3.85 (.151)
0.40 (.015)
7.50 (.295) 4.70 (.185)
15.75 (.620)
4.70 (.185)
10.16 (.400)
11.40 (.448)
3.18 (.125)
Ø1.60 (.062 DIA)
3.85 (.151)
Ø1.60 (.062 DIA)
3.18 (.125)
3.81 (.150)
7.50 (.295)
0.80 (.031)
ON ON
1.10 (.043)
6.35 (.250)
3.85 (.151)
12.70 (.500)
4.70 (.185)
2.80 (.110)
3.18 (.125)
OFF
3.85 (.151)
4.70 (.185)
ON ON
Straight PC terminals - short bracket : Y0
Single pole Double pole GH36Y0 GH46Y0 ON GH39Y0 GH49Y0 ON
3.85 (.151)
10.16 (.400)
OFF
4.45 (.175)
Single pole Double pole GH36WW GH46WW ON GH39WW GH49WW ON
12.70 (.500)
6.65 (.261)
4.70 (.185)
12.70 (.500)
Right angle terminals - vertical
Solder lug model
17.53 (.690)
Ø2.40 (.094 DIA)
4.20 (.165)
PANEL CUT-OUT
6.50 (.255)
APEM
www.apem.com
14.90 (.586)
13.65 (.537)
10.46 (.411)
9.20 (.362)
6.35 (.250)
5.70 (.224) 12.70 (.500)
11.40 (.448)
3.30 (.129)
9.50 (.374)
8.25 (.324)
6.65 (.261)
PCB MOUNTING
E-11
04-Serie G-A_04-Serie G-A 06/11/14 13:56 Page12
G series Slide switches - telecom grade ACTUATORS Replace second digit (H) of basic model number with one of the codes below.
G H . . . .
5.10 (.200)
3.50 (.137)
L
Standard
For single pole only
9.10 (.358)
9.50 (.374)
H
7.65 (.301)
C
6.40 (.251)
Dimensions below are for solder lug (S0) and straight terminals (P0) models. For other models (WO - WW - Y0 - Y4), height is less 0,4 mm (.015).
B
E
For single pole only
For single pole only
N
E CONTACT AND TERMINAL MATERIALS
0 1 2 5
E-12
Brass, gold plated Silver Silver, gold plated Special contact, lower rating, minimum quantity : consult factory
www.apem.com
APEM
04-Serie G-A_04-Serie G-A 06/11/14 13:56 Page13
G series Slide switches - telecom grade SPECIAL OPTIONS
1
00
Standard switch as presented under "Model Structure"
10
Switch without ground plate For right angle only (W0 and WW models)
11
10.35 (.407)
10 10,35 mm (.407) long PC terminals
12
10,35 mm (.407) long PC terminals without ground plate
10.35 (.407)
11
12
SPECIAL OPTIONS
2
No epoxy seal
01
Epoxy sealed terminals (compulsory on solder lug models)
10
Extended terminals For vertical right angle (WW models)
11
Extended terminals as above, with epoxy seal
E
21.60 (.850)
00
APEM
10
EPOXY
11
www.apem.com
E-13
