GF Piping Systems
Section 13
Fusion Machines and Tools
409
410
½"–3"
N/A
N/A
1½"–12"
1½"–6"
1½"–12"
PPro-Seal™
SYGEF® Plus®
SYGEF®
Fuseal®
Fuseal 25/50™
Fuseal Squared™
N/A
N/A
PROGEF® Natural
PE100
N/A
PROGEF® Standard
Electro Plus
N/A
1½"–12"
1½"–6"
1½"–12"
N/A
N/A
½"–3"
N/A
N/A
MSA 250
2”–26”
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Easy Fuse
Electrofusion
N/A
N/A
N/A
N/A
16–63
N/A
N/A
N/A
16–110
MSE Hand Tool
N/A
N/A
N/A
N/A
16–63
N/A
N/A
N/A
16–110
SG-110
Socket
Fusion Technology Product Range
N/A
N/A
N/A
N/A
32–160
N/A
N/A
32–90
32–160
SG-160
Contact Butt or Socket Manual
N/A
N/A
N/A
N/A
N/A
N/A
N/A
20–90
20–110
MC 110
2”–4”
N/A
N/A
N/A
N/A
N/A
N/A
N/A
40–160
GF 160
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
75–250
GF 250
Contact Butt
4”–10”
N/A
N/A
N/A
N/A
N/A
N/A
N/A
90–315
GF 315
8”–18”
N/A
N/A
N/A
200–315
N/A
N/A
N/A
200–400
GF 500
2”
N/A
N/A
N/A
20–63
20–63
N/A
20–63
20–63
IR 63 Plus®
N/A
N/A
N/A
N/A
20–110
20–110
N/A
20–90
20–110
IR 110 Plus®
2”–8”
N/A
N/A
N/A
63–225
63–225
N/A
63–90
63–225
IR 225 Plus®
Infrared (IR)
N/A
N/A
N/A
N/A
250–315
250–315
N/A
N/A
N/A
IR 315 Plus®
N/A
N/A
N/A
N/A
20–110
20–110
N/A
20–90
N/A
BCF® Plus
Bead and Crevice Free
Table of contents Page Equipment for Cutting, Chamfering, Peeling Plastic Pipe
413
Electro Plus & Accessories
422
MSA 250 & Accessories
424
MSA 330 & Accessories
426
MSA 340 & Accessories
428
SG 125 and MSE63/MSE110 Socket Fusion
432
MC 110 Butt Fusion Machine
437
TM 160-250-315 CNC
439
GF 400 CNC Butt Fusion Machine
440
GF 630 CNC Butt Fusion Machine
442
Facing Tool Blade Sets for GF 160-630
444
IR63 Plus® Fusion Joining Machine and Accessories
447
IR-110 Plus® Fusion Joining Machine and Accessories
450
411
Page
412
IR-225 Plus® Fusion Joining Machine and Accessories
452
Upgrade Programs for IR Plastic Fusion Joining Machines
455
BCF Plus Plastic Fusion Joining Machine
458
Accessories for IR and BCF Plastic Fusion Joining Machines
463
Rental Program
465
Equipment for Cutting, Chamfering, Peeling Plastic Pipe PPC Plastic pipe cutter
D
• For cutting plastic pipes d10 - d160 Article
d-d
Part No.
[mm]
PPC 63, s max. = 7.2 mm PPC 110, s max. = 12.7 mm PPC 160, s max. = 19.0 mm
USD
10 ‐ 63 790 109 001 * 50 ‐ 110 790 109 002 * 110 ‐ 160 790 109 003 *
97.78 208.31 248.70
closest inch [inch]
1 ∕8 ‐ 2 1 1∕2 ‐ 4 4‐6
Replacement cutting wheels
D
• for plastic pipe cutter d-d
Article
[mm]
Part No.
10 ‐ 63 SR 63 max. s = 7.2 mm 50 ‐ 110 SR 110/160 max. s = 12.7 mm 110 ‐ 160 SR 160 max. s = 19.0 mm
USD
790 109 011 * 790 109 012 * 790 109 013 *
27.63 45.70 54.20
EX 360E Pipe Cutter • Voltage / Power: 230V / 1750W • Voltage / Current: 110V, 120V / 15A Description
*
Part No.
USD
weight
75mm – 360mm (3”- 14”) Pipe 150 100 300 Cutter
[lb]
0.0
3,000.00
KS 355Plastic pipe cutter
D
• Unique clamping mechanism, no additional tools like belts, chains or reduction inserts necessary.
d-d
[mm]
Part No.
USD
160 ‐ 355 790 202 001 *
4,166.22
KS 355 Saw blade Ø 180x30 Part No. 790 202 011 *
D
USD
357.10
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
413
Manual pipe peeling tool d
[mm]
20 25 32 40 50 63 75 90 110
Part No. 799 300 260 * 799 300 270 * 799 300 280 * 799 300 290 * 799 300 300 * 799 300 310 * 799 300 320 * 799 300 330 * 799 300 340 *
USD
136.04 136.04 136.04 187.05 198.75 226.38 255.07 294.40 318.84
Replacement Blade Peeling tool blade d
[mm]
20 25 32 40 50 63 75 90 110
Part No. 799 300 266 * 799 300 276 * 799 300 286 * 799 300 296 * 799 300 306 * 799 300 316 * 799 300 326 * 799 300 336 * 799 300 346 *
D
D
USD
25.51 25.51 25.51 25.51 25.51 37.20 37.20 53.14 53.14
Chamfering Tools
D
• Chamfering tool (15° bevel) for plastic pipes (PVC, ABS, PB, PP, PE). Coated prism surface suitable for clean room applications. Fast and reliable adjustment to the different pipe diameters and wall thickness.
d-d
Part No.
[mm]
USD
16 ‐ 200 790 309 003 * 63 ‐ 400 790 309 004 *
426.19 556.91
Chamfering Tool for PPro-Seal, Fuseal PP, Fuseal 25/50 and PE-100. Sizes 1/2" 1-1/4" Size [inch]
∕2 ∕4 1 1 1∕4 1 3
414
Part No. 150 309 010 * 150 309 011 * 150 309 012 * 150 309 013 *
USD
29.66 29.66 30.30 33.33
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
D
Chamfering Tool
D
Chamfering tool for PPro-Seal, Fuseal PP, and Fuseal 25/50. Sizes 1 1/4" to 4". Part No. 150 109 104 *
USD
Description
103.07 1 1/4" - 4" Chamfering Tool
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
415
KS 1600 Plastic pipe cutter
D
• The easy handling and an optimal safety do make the saw indispensable on each construction site
• Motor hand-circular saw with chain guiding • The machine consists of a motorized hand saw, with guide carriage and tensioning chain for each pipe diameter
• The tensioning chain is to be out around the pipe and tight•
ened by means of the chain tensioner. The carriage is applied with the hand circular saw. The pipe is cut by moving the carriage around the pipe. A quick, clean and right angled cut is the result
The KS 1600 is used for cutting plastic pipes fast, cleanly and properly right-angled from diameter 500 mm up to 1600 mm with a wall thickness of max. 60 mm. For each pipe diameter, the appropriate chain length is necessary. The saw is to be put on the tensioned chain as per user manual which serves as a guiding device for the saw over a full 360° turn. The guard plate covers the saw blade also during operation and provides full protection for the user at all times. The KS 1600 basic kit consists of a circular-hand saw, 230 V / 2200 W with carriage, 2 tension chains for d560 mm and d630 mm as well as a chain tensioner. The whole equipment comes in a convenient and robust transport box. The easy handling and the optimal safety features make this tool indispensable on every building site. Scope of delivery: 1 Circular-hand saw, 1 tensioning chain d560 mm, 1 tensioning chain d630 mm, 1 chain tensioner, 1 hex-wrench size 5, 1 hexwrench size 6, 1 operating instruction, transport box Technical data: Dimension range:d500 - 1600 mm (In combination with the respective tensioning chain) Plug: EU-Plug Voltage:230 V AC Power: 2200 Watt Frequency:50-60 Hz Circular saw blade outer-Ø: 240 mm RPM: 4100 Sound level: 104 dB (A) Weight saw: 15.5 kg Weight KS 1600 Basic Kit: 43.5 kg Dimensions saw (W x H x D): 790 x 330 x 335 mm Dimensions Transport Box: 950 x 400 x 395 mm d-d
[mm]
416
Type
Part No.
500 ‐ 1600 KS 1600 Basic Kit
790 109 600 *
USD
5,796.58
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
KS 1600 Chain Holder
D
• Chain tensioner is included in the scope of delivery of the KS 1600 Basic Kit (790 109 600).
d-d
Part No.
[mm]
USD
500 ‐ 1600 790 109 616 *
597.30
KS 1600 Tensioning Chains
D
• Chains for d560 mm and d630 mm are included in the scope of delivery of the KS 1600 Basic Kit (790 109 600).
d
[mm]
Part No.
USD
500 790 109 605 *
523.97
weight [kg]
5.200
AQUATAP Installation Tools
D
Tool Box not sold separately Number
1-7 2 3 4 5 6
Description Complete Tool Box Kit (Includes Items 1-7) Heater Plate Protector 5/8" Flare - Heater Bushing Flare Mandrel Tubing Hex Jaw Pliers Tube Cutter (KTS 125)
Part No. 799 530 200 * 799 530 001 * 799 530 155 * 799 530 156 * 799 530 157 * 799 530 158 *
USD
495.27 29.76 66.42 104.16 29.76 31.88
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
417
Rotary Peeler RS
D
This innovative Rotary Peeler RS is designed for universal peelung at the pipe end for electrofusion couplings, tees and elbows and as well as for electrofusion saddles. Suitable for peeling PE80, PE100, PEX and PP pipes. Features and your advantage: Spring loaded peeling blade: Peeling quality independent of pipe ovality or tolerance Pivoted mounted peeling blade: To compensate the shape of coiled pipe Optimized cutting geometry: Definded chip thickness with cutting width overlap One tool per dimension: Minimized swivel radius for peeling in narrow locations Peeling length: No limitation of peeling length Guidance rolls: 3-point-support for dimensional optimized cutting feed Time saving: Tool is always ready for use, it can be used for the next peeling without having to set the peeling blade back in its origin position Your adavantage: Time saving and highest repeatable peeling quality at smallest rotaion radius. No operator errors possible when changing dimension Included: 1 x Rotary Peeöer RS, Transport case, Operating manual, Spare parts list Article RS 40 RS 50 RS 63 RS 75 RS 90 RS 110 RS 160 RS 225 RS 250
d
[mm]
40 50 63 75 90 110 160 225 250
Part No.
USD
790 136 001 * 790 136 002 * 790 136 003 * 790 136 004 * 790 136 005 * 790 136 006 790 136 009 * 790 136 012 * 790 136 013 *
421.00 421.00 443.30 534.02 534.02 534.02 592.78 683.51 742.27
Replacement blade to Rotary Peeler RS d-d
[mm]
418
Description
40 ‐ 315 Hard metal
Part No. 790 136 100
USD
95.00
weight [kg]
0.140
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
D
Transport cases for Rotary Peeler RS
D
• Included in the scope of delivery of the Rotary Peeler RS Article
Part No.
RSTC 40-110 RSTC 125-160 RSTC 180-225 RSTC 250-315
USD
790 136 211 790 136 212 790 136 213 790 136 214
weight [kg]
27.00 34.00 68.00 103.00
0.718 1.212 1.796 2.901
Description
Dimension [mm]
for RS 40-RS 110 for RS 125-RS 160 for RS 180-RS 225 for RS 250-RS 315
Peeling tool PT 2
326 ‐ 222 ‐ 116 437 ‐ 395 ‐ 116 450 ‐ 360 ‐ 132 566 ‐ 435 ‐ 156
D
• Scope of delivery: 1 tool (size 1, 2 or 3) in a metal carrying case.
• The rotating Peeling Tool PT 2 are suitable for preparing pipe
ends (when installing Electrofusion couplers and fittings). The tool ensures a constant peeling quality on the complete peeling surface and is suitable for PE80, PE100 and PEX pipes.
d-d
Part No.
[mm]
USD
63 ‐ 250 799 300 752 *
Description
Call Size 1, peeling length 140 mm
Peeling tool PT 4
D
• The easy-to-use peeling tools PT 4 are suitable for prepar-
ing pipe ends (when installing Electrofusion couplers and fittings). The tools ensure a constant peeling quality on the whole peeled area and are suitable for PE80 and PE100 pipes. There is no tool service arrangement for the PT 4. Scope of delivery: 1 tool with exchangeable blade (4 cutting surfaces).
• e
[mm]
1.9 2.3 3.0 3.7 4.6 5.8
d
Part No.
[mm]
20 25 32 40 50 63
USD
799 300 704 * 799 300 706 * 799 300 708 * 799 300 709 * 799 300 710 * 799 300 711 *
Description Pipe Insert SDR 11 Pipe Insert SDR 11 Pipe Insert SDR 11 Pipe Insert SDR 11 Pipe Insert SDR 11 Pipe Insert SDR 11
118.56 118.56 118.56 126.80 126.80 174.23
Double clamp
D
• The user-friendly Double Clamps are suitable for coupler con•
nections. They are quickly and easily put into position and prevent pullout and pipe movements during the fusion time and cooling time. Scope of delivery: 1 tool consisting of 1 beam (compact), 2 Vclamps complete with ratchet and belt.
d-d
[mm]
Part No.
63 ‐ 125 799 301 484 * 110 ‐ 225 799 301 486 * 225 ‐ 500 799 301 488 *
USD
344.33 541.24 837.11
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
419
Quadruple clamp
D
• The professional Quadruple Clamps are suitable for coupler • •
connections. They are quickly and easily put into position and ensure a stress-free fusion. They prevent pullout and pipe movements during the fusion and cooling times. Recommended for difficult site conditions with large installation-induced stresses. Scope of delivery: 1 tool consisting of 1 beam (long), 4 Vclamps complete with ratchet and belt.
d-d
[mm]
Part No.
USD
63 ‐ 125 799 301 459 * 110 ‐ 225 799 301 461 * 225 ‐ 500 799 301 463 *
Call Call Call
Turbo Scrapers For use with cordless drills Part No. 150 201 000 150 201 001 150 201 002 150 201 003 150 201 004 150 201 005
420
USD
215.67 215.67 224.54 224.54 233.40 233.40
d
[mm]
20 25 32 40 50 63
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
421
1:32
1:36
1½"
1:39
1:30
1:50
2"
1:52
1:40
1:30
3"
2:10
1:55
4"
3:55
3:10
6"
4:00
8"
4:00
10"
5:00
12"
Fuseal 25/50™
Fuseal
PPro-Seal™
Electro Plus and MSA 250
®
Product
Electrofusion 4
½" 4
¾" 4
1"
Number of Joints Possible per Cycle
4
4 4
4
2"
4
1½"
4
4
4
3"
4
4
4"
4
4
6"
2
8"
2
10"
2
12"
*All times in miutes: seconds and are approximate based in 68˚F/20˚C ambient temperature. These times are only for the fusion process and do not include the cooling times.
1:26
1:27
1"
Fuseal 25/50™
1:20
¾"
1:20
PPro-Seal™
Electro Plus and MSA 250
½"
Fuseal®
Product
Electrofusion
Electrofusion Process Times
Electro Plus & Accessories Electro Plus®
D
Advantages Intuitive user interface Multiple joint capability for speedy installations Integral carrying case for ease of transportation One-button repeat fusion cycle for same size joints Self-diagnostic error detection system Automatic compensation for ambient temperature The Electro Plus® fusion machine can be used to join the following piping systems: Fuseal 1½-12'', Fuseal Squared 1½-12'', Fuseal 25/50 1½-6'' and PPro-Seal ½-3''. This complete machine includes: Fusion Power Unit, Hand Held Unit and the Cable Assembly. Technical Data Operating Temper- 14°F (-10°C) to 113°F (45°C) ature Input Voltage
100-130 V AC / 200-250 V AC
Input Frequency
50Hz - 60 Hz
Output Voltage
0 – 28.5 V AC
Output Current
0-50 Amps
Power Consumption
1200 Watts max.
Power Cable Length
5ft. (1.5m)
Fusion Cable Length
18ft. (5.5m)
Remote Cable Length
20ft. (6m)
Dimensions (WxHxD)
22x14x10 inch
Weight
45lbs (20.5kg)
Description Electro Plus
Part No.
USD
150 000 001 *
2,247.85
weight [lb]
0.002
Hand Held Unit
D
Complete hand held unit with connection cable and protection case. This is a replacement unit which can be used on any Electro Plus machine. Description Hand Held Unit
422
Part No. 150 000 003 *
USD
394.30
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
Cable Assembly
D
Complete cable assembly with connector plug. This is a replacement unit which can be used on any Electro Plus machine. Description Cable Assembly
Part No. 150 000 004 *
USD
557.98
Fusion Power Unit
D
Complete fusion power unit with main power cable. This is a replacement unit which can be used with any hand held unit and cable assembly. Description Fusion Power Unit
Part No. 150 000 002 *
USD
1,351.90
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
423
MSA 250 & Accessories MSA Plus 250 EX Multi Automatic Electrofusion Unit
D
Monovalent automatic electrofusion unit with barcode scanner. The MSA units with the unique inverter technology and the active cooling system for trouble-free operation from generator or mains supply. Suitable for jointing in series. The unit is robust, light and easy to use. Single push-button operation, display shows fusion time and energy consumed. Inclusive transport box, 1 pair of angle adapter clips 4.0mm, cable assembly, barcode set with continuity tester and instruction manual. The MSA Plus 250 EX Multi can be used to join the following piping systems: PE Ø 20-400; INSTAFLEX PB Ø 125, 160, 225; Fuseal SeaDrain Ø 1½-12"; Fuseal 1½-12"; Fuseal Squared 1½-12"; Fuseal 25/50 1½-6"; and PPro-Seal. Technical Data Ambient temperature
14°F (-10°C) to 113°F (+45°C)
Mains voltage
180 V - 264 V AC
Mains frequency
45Hz - 65 Hz
Fusion voltage
8 - 42 (48) V AC
Fusion current
max. 80 A
Power
max. 3500 W
Protection
1 / IP 65
Mains cable
3m
Fusion cable
3m
Dimensions (WxHxD)
20"x15"x10"
Weight incl. cables
25.5 lbs (11.5 kg)
Display
LED 1 x 4 N, 7 Segments
Size display (WxH)
50 x 18 mm
Type MSA Plus 250 EX Multi
Part No. 799 350 520 *
USD
Description
3,548.73 barcode scanner, transport case
Barcode Set with Continuity Tester
D
• Replacement barcode set with barcode cards for the following systems: Fuseal 1 1/2-12", Fuseal 25/50 1 1/2-6", Ppro-Seal 1/2-3".
Description
424
Part No.
Barcode Set with Continuity Tester 799 350 900 * Continuity Tester 799 350 901 * Operation Mode Cards MSA250 EX Multi 799 350 902 *
USD
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
29.76 18.07 11.69
weight [lb]
0.661 0.441 0.220
MSA Fusion Cables
D
Replacement MSA fusion cables 5 feet long. Description
Part No.
Single Cable 799 350 910 * Cable Assembly 799 350 911 *
USD
107.34 297.59
weight [lb]
0.882 1.764
MSA Barcode Scanner
D
• Robust, handy barcode scanner with a high reading perfor-
mance made for the construction site. Quick, safe and professional! Compatible with MSA 500, MSA 3000, MSA 250, 300, 350 and 400 and MSA Plus 250-400 Electrofusion control units.
Part No. 799 350 419 *
USD
Description
409.18 Barcode scanner with pouch and instructions
MSA Carrying Case Description
D Part No.
MSA Carrying Case, 20"x10"x15" 799 350 473 *
USD
213.63
weight [lb]
12.214
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
425
MSA 330 & Accessories MSA 330 Electrofusion unit with jointing data recording
D
The MSA 330 electrofusion unit combines high performance in jointing with easy and safe handling. The internal memory has a capacity of 500 jointing records, for data transfer the unit is equipped with an USB interface. The record is delivered as PDF or CSV format, both are manageable with common and free PC software applications. An intuitive operation menuguides youthrough the complete jointing process. For fusion data input a barcode reader pen or a scanner is connected. The entire welding process is controlled and regulated with energy output compensation depending on ambient temperature and the indication of cooling time. Robust aluminum housing with convenient cable winding and handle for weight balanced transport. The unit is suitable for jointing in series. Scope of delivery: dedicated transport case, pouch for optical pen or scanner, 2 pairs of angle adapter clips 4,0 mm and 4,7 mm, operation instructions and configuration chart. Technical Data Ambient temperature
-10Cto +45C
Mains voltage
180 V - 265 V AC
Mains frequency
40 Hz -70 Hz
Fusion voltage
8 - 48V AC
Fusion current
max. 90 A
Suggested power generator
3,5 kVA ( 5,0 kVA for fittings with >200mm )
Protection
Class 1 / IP 54
Mains cable
4m
Fusion cable
4m
Interface
USB (type A) for PC communication and software updates
Dimensions (WxHxD)
280 x 480 x 320 mm
Weight incl. cables
ca. 21,7 kg
Display
LCD (20 alphanumerical char. x 4 lines), contrast adjustment, blue background, white characters
Languages
10
Description
Part No.
barcode scanner, transport case
USD
790 160 005 *
weight [lb]
4,198.11
66.139
Adapter
D
• Adapters for Electrofusion units with 4 mm connectors.
Compatible with electrofusion units MSA 330 and MSA 340 Type
426
4.0 x 4.7mm
Description
Part No.
Adapter, white 150 000 201 *
USD
98.81
weight [lb]
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
0.00
MSA Barcode Scanner
D
Compatible with MSA 330 and MSA 340 Part No.
USD
weight
Description
150 000 202 *
[lb]
0.002
476.40
Barcode scanner with pouch and instructions
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
427
MSA 340 & Accessories MSA 340 Traceability Electrofusion unit with GPS function High performance electrofusion unit providing an entire documentation of fusion and traceability data (ISO 12176) including GPS coordinates added automatically to each fusion record. The internal memory has a capacity of 1000 jointing records, for data transfer the unit is equipped with an USB interface. The record is delivered as PDF or CSV format, both are manageable with common and free PC software applications. An intuitive operation menu guides you through the complete jointing process. For fusion data input a barcode scanner is connected. The entire welding process is controlled and regulated with energy output compensation depending on ambient temperature and indication of cooling time. Robust aluminum housing with convenient cable winding and handle for weight balanced transport. The unit is suitable for jointing in series. Rental time period programmable by the machine owner, unit blocks on expiring date, reset by password. Scope of delivery: dedicated transport case, pouch for scanner, 2 pairs of angle adapter clips 4.0 mm and 4.7 mm, operation instructions and configuration chart. Technical Data Ambient temperature
-10Cto +45C
Mains voltage
180 V - 265 V AC
Mains frequency
40 Hz -70 Hz
Fusion voltage
8 - 48V AC
Fusion current
max. 90 A
Suggested power generator
3,5 kVA (5,0 kVA for fittings with >200mm)
Protection
Class 1 / IP 54
Mains cable
4m
Fusion cable
4m
Interface
USB (type A) for PC communication and software updates
Dimensions (WxHxD)
280 x 480 x 320 mm
Weight incl. cables
ca. 21,7 kg
Display
LCD (20 alphanumerical char. x 4 lines), contrast adjustment, blue background, white characters
Languages
10
Description
Part No.
barcode scanner, transport case
428
790 160 007 *
USD
5,001.59
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
D
MSA 340 -115 Volt Traceability Electrofusion unit with GPS function
D
High performance electrofusion unit providing an entire documentation of fusion and traceability data (ISO 12176). GPS coordinates of fusion location added automatically to each fusion record. Optional ability of operator ID and job number recognition. The internal memory has a capacity of 1000 jointing records, for data transfer the unit is equipped with an USB interface. The record is delivered as PDF or CSV format, both are manageable with common and free PC software applications. Rental time period programmable by the machine owner, unit blocks on expiring date, reset by password. An intuitive operation menu is guiding through the complete jointing process. For fusion data input a barcode scanner is connected (manual data input configurable). The entire welding process is controlled and regulated with energy output compensation depending on ambient temperature and indication of cooling time. The unit is suitable for jointing in series. Robust aluminum housing with convenient cable rewind and handle for weight balanced transport. Fusion cable detachable with military connector. Inclusive dedicated transport case, pouch for scanner, 2 pairs of angle adapter clips 4.0 mm and 4.7 mm, operation instructions and configuration chart. Technical Data Ambient temperature
-10Cto +45C
Mains voltage
90 V - 135 V AC
Mains frequency
40 Hz -70 Hz
Fusion voltage
8 - 48V AC
Fusion current
max. 90 A
Suggested power generator
3,5 kVA (5,0 kVA for fittings with >200mm)
Protection
Class 1 / IP 54
Mains cable
10 m
Fusion cable
3m
Interface
USB (type A) for PC communication and software updates
Dimensions (WxHxD)
280 x 480 x 320 mm
Weight incl. cables
ca.25 kg
Display
LCD (20 alphanumerical char. x 4 lines), contrast adjustment, blue background, white characters
Languages
10
Description
Part No.
barcode scanner, transport case
USD
790 160 014 *
5,001.59
Adapter
D
• Adapters for Electrofusion units with 4 mm connectors.
Compatible with electrofusion units MSA 330 and MSA 340 Type
4.0 x 4.7mm
Description
Part No.
Adapter, white 150 000 201 *
USD
98.81
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
weight [lb]
0.00
429
MSA Barcode Scanner
D
Compatible with MSA 330 and MSA 340 Part No.
USD
weight
Description
150 000 202 *
430
[lb]
0.002
476.40
Barcode scanner with pouch and instructions
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
431
15 14
PROGEF® Natural SYGEF® PVDF
16
15
15
20
18
21
21
25
26
24
24
32
28
38
38
40
34
44
44
50
44
62
62
63
68
68
75
88
88
90
110
110
*All times in seconds and are approximate based on 68°F/20°C ambient temperature. Times do not account for facing, peeling, and cleaning per the GF Fusion Training program.
15
PROGEF® Standard
MSE Handtools or SG 110
16
Product
Socket Fusion
Socket Fusion Process Times*
SG 125 and MSE63/MSE110 Socket Fusion For fusion jointing of PP, PE, PB and PVDF pipes and fittings
D
• Portable heating element - socket fusion machine for use in • • • • • • • • • • • • • • •
the workshop and on job sites. Dimension 20 - 90 Base machine Compact, sturdy design, distortion-free machine bed Handwheel with torque locking mechanism for the slide movement Fast selection of insertion depth according to the pipe dimension Heater Thermostatic temperature control High temperature accuracy over the entire heating surface Additional standard equipment on the basic model Universal, left and right prismatic clamping devices, complete, for chlamping pipe and fittings. Additional set of prismatic clamping devices for outer clamping of pipes available as an option. V-shaped pipe support d 20 - 125 mm Back stop Machine specific tool set Timer to clock fusion times Including transport packaging, without accessories
d-d
[mm]
Performance
20 ‐ 90 115 V/1500 W
Part No.
USD
790 310 036 *
Call
Transportation Box SG125 Description
Part No.
Transportation Box SG125 155 701 276 *
D USD
343.29
Universal prismatic clamping device, complete d-d
[mm]
Part No.
20 ‐ 125 790 310 040 *
USD
532.47
Backstop, complete d-d
[mm]
432
Part No.
20 ‐ 110 790 310 012 *
D
D
USD
177.49
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
V-shaped pipe support, complete d-d
[mm]
Part No.
USD
20 ‐ 110 790 310 013 *
177.48
Replacement heating element SG125 d-d
[mm]
Description
20 ‐ 125 thermostatic
Performance
Part No.
115 V/1500 W
D
USD
790 310 046 *
922.52
Replacement heating element SG110 Description thermostatic
d-d
Performance
[mm]
Part No.
20 ‐ 110 115 V/1200 W
D
USD
790 310 017 *
786.48
MSE 63/MSE 110 Socket fusion tools
D
• for fusion jointing of PP, PE and PVDF pipes and fittings • Choice of electronic or thermostatic temperature control • Support for heating bushes and spigots of d 16 to 63 mm (110 • • • •
mm) Pick up for floor stand or table clamp Monitoring and setting of heating element temperature High temperature accuracy over the entire heating surface T = thermostatic temperature control / E = electronic temperature control
d-d
[mm]
Performance
16 ‐ 63 115 V/800 W 16 ‐ 110 115 V/1500 W
Type MSE 63 T MSE 110 T
Part No. 790 105 096 * 790 105 126 *
USD
286.96 414.50
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
433
MSE 63/MSE 110 - Set - Socket fusion tools
D
• for fusion jointing of PP, PE and PVDF pipes and fittings • All devices equipped with on/off switch, mains and temperautre control lamp
• Choice of electronic or thermostatic temperature control • Support for heating bushes and spigots of d 16 to 63 mm (110 mm) Pick up for floor stand or table clamp Monitoring and setting of heating element temperature High temperature accuracy over the entire heating surface High-quality, non-stick PTFE-coating with long service life Heating bushes and spigots Available as a complete set in a practical metal case Table clamp Floor stand for MSE 63 Alen screws and key T = thermostatic temperature control / E = electronic temperature control
• • • • • • • • • •
Performance 115 V/800 115 V/1500
d-d
Type
[mm]
16 ‐ 63 MSE 63 T 16 ‐ 110 MSE 110 T
Part No. 790 105 098 * 790 105 128 *
USD
1,124.46 1,841.85
Heating spigots and bushes
D
• High-quality, non-stick PTFE-coating with long service life • Type B according to DVS 2208-1 (mechanical calibrated pipe ends)
• Always delivered in pairs (also usable for SG 100, SG 125, not for SG 160)
d
[mm]
16 20 25 32 40 50 63 75 90 110
Part No.
USD
799 300 155 * 799 300 156 * 799 300 157 * 799 300 158 * 799 300 159 * 799 300 160 * 799 300 161 * 799 300 162 * 799 300 163 * 799 300 164 *
82.90 89.28 94.59 107.34 117.97 136.04 154.11 177.49 237.01 301.84
Floor stand for manual fusion tools SSE/ MSE Part No. 790 105 063 *
434
USD
19.13
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
D
Metal case
D
• For butt and socket fusion hand tools Article MSE 63 MSE 110
Part No.
USD
790 105 089 * 790 105 090 *
116.91 128.25
Table clamp for SSE/MSE
D
• For correct placement of heater Part No. 790 109 315 *
USD
74.50
SP
weight [kg]
0
0.660
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
435
436 18.00 18.00
PROGEF Standard ®
PROGEF Standard PROGEF Standard
GF 315
GF 315
GF 500
15.00
18.00
21.00
21.00
21.00
21.00
21.00
110
29.00
29.00
29.00
29.00
29.00
160
35.00
35.00
35.00
35.00
200
38.00
38.00
38.00
38.00
225
42.00
42.00
42.00
42.00
250
52.00
52.00
52.00
315
*All times in minutes:seconds and are approximate based on 68°F/20°C ambient temperature. Times only account for heating, joining and cooling of products per the GF Fusion Training Program. GF recommends IR Plus® fusion for SYGEF® PVDF products.
®
18.00
®
12.00
18.00
PROGEF Standard
11.00
15.00
GF 250
8.00
12.00
®
11.00
PROGEF Standard
8.00
GF 160
90
7.00
75
®
63
PROGEF Standard
50
SG 160
40
32 ®
Product
Machine
Contact Butt Fusion Process Times*
56.00
355
63.00
400
70.00
450
MC 110 Butt Fusion Machine Machine MC 110, complete with electric planer
D
• Portable butt fusion machine for use in the workshop and on
job sites. For fusion jointing of PP and PE pipes and fittings as well as prefabrication of segments in the size range of d 20 110 mm and up to SDR 11. Machine MC 110 complete includes: machine mounting, base machine, 2 base clamping plates (wide), base clamping plate (left narrow), electrically operated planer, thermostatic controlled heater, table clamp and transport box. Including transport packaging, without accessories
• •
d-d
Performance
[mm]
20 ‐ 110 115V/1360W
Part No.
USD
790 109 321 *
4,506.32
Reduction clamping inserts, wide
D
• Each code number defines 1 half shell. Per wide base clamping plate 2 reduction half-shells are needed.
• 20 - 90 mm d
[mm]
20 25 32 40 50 56 63 75 90
Part No.
USD
790 109 326 * 790 109 327 * 790 109 328 * 790 109 329 * 790 109 330 * 790 109 342 * 790 109 331 * 790 109 332 * 790 109 333 *
24.44 24.44 24.44 24.44 24.44 24.44 24.44 24.44 24.44
SP
weight [kg]
0 0 0 0 0 0 0 0 0
0.150 0.139 0.133 0.130 0.113 0.137 0.120 0.110 0.100
Base clamping plate, right narrow
D
• 110 mm for fitting/pipe joints • For mounting the narrow reduction clamping inserts • Freely adjustable (max. 15°) d
[mm]
Part No.
USD
110 790 109 310 *
266.77
Reduction clamping inserts, narrow
D
• Each code number defines 1 half shell. Per wide base clamping plate 2 reduction half-shells are needed.
d
[mm]
20 25 32 40 50
Part No.
USD
790 109 334 * 790 109 335 * 790 109 336 * 790 109 337 * 790 109 338 *
15.94 15.94 15.94 15.94 15.94
table continued next page ^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
437
d
[mm]
56 63 75 90
Part No.
USD
790 109 343 * 790 109 339 * 790 109 340 * 790 109 341 *
15.94 15.94 15.94 15.94
Planer, electrically operated
D
• Center of planing radial adjustable. d-d
[mm]
Performance
Part No.
20 ‐ 110 115V/560W
USD
790 109 324 *
1,501.75
Heater • • • •
Choice of electronic or thermostatic temperature control Including machine mounting Control lamps (power, status) PTFE coating
d-d
[mm]
D
Description
Performance
20 ‐ 110 thermostatic
115V/800W
Part No. 790 109 322 *
USD
Call
Table clamp
D
• For correct placement of heater Part No.
USD
790 109 315 *
74.50
Flange adapter clamping unit
D
• For correct clamping and fusion joining of short end fittings d-d
[mm]
Part No.
25 ‐ 110 790 109 316 *
USD
349.67
Replacement blades
D
• Sharpened on both sides (1 set = 2 pieces) Description short
438
Part No.
USD
790 118 043 *
95.65
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
TM 160-250-315 CNC Machine complete
D
• High quality, reliable and user-friendly heating element butt • •
• •
fusion machine for automated fusion jointing of PE and PP pipes and fittings on building sites. Designed for applications in gas and water distribution. Machine equipped with innovative CNC hydraulic control unit and the machine components of the TM TOP machines: sturdy base machine, powerful planer, high performance heating element, storage case for the planer and heater. The distance control (potentiometer) mounted into the base machine grants control and safety throughout the complete welding process. Scope of delivery includes transport packaging (wooden crate), not the reduction inserts and other accessories !
CNC Control Unit
• Operator guidance from preparation to the end of the jointing • • • • • • • • • • • • •
process by use of symbols and graphics. Intuitive data input by touch screen operation (welding standard, material, diameter, SDR, traceability data). Automatic calculation, regulation and control of the fusion parameters - pressure, time and temperature - according to country specific guidelines. 10 freely programmable welding cycles available (e.g. for non standard dimensions (Relining), special materials etc.). Various configuration possibilities, such as cooling time reduction according to the measured ambient temperature (CTC) and automatic bead build-up phase. Selection of language. Welding report storage on removable standard USB memory key (memory key supplied with the machine). Operator ID (ISO 12176-3), job number and pipe codes (ISO 12176-4) could be added to each welding record by the use of the optional barcode scanner (790152052) Data transfer to PC (SUVI WIN-WELD software supplied with the machine) via USB interface. Shock absorbing plastic housing in attractive design. Integrated power outlets for planer and heating element. Preinstalled socket for connection of the barcode scanner (Accessory). Oil level control and refilling without disassembling the unit. Two handles to carry the hydraulic unit.
Type TM 160 CNC TM 250 CNC TM 315 CNC
Performance 230V/2000W 230V/3150W 230V/3750W
d-d
[mm]
Part No.
40 ‐ 160 790 150 012 * 75 ‐ 250 790 151 012 * 90 ‐ 315 790 152 012 *
USD
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
24,170.10 26,584.54 30,417.69
439
GF 400 CNC Butt Fusion Machine Machine complete
D
• High quality, reliable and user-friendly heating element butt
fusion machine for automated fusion jointing of PE and PP pipes and fittings on building sites. Designed for applications in gas and water distribution. Machine equipped with innovative CNC hydraulic control unit and the machine components of the GF 400 machine: sturdy base machine, powerful planer, high performance heating element, storage case for the planer and heater. The distance control (potentiometer) mounted into the base machine grants control and safety throughout the complete welding process. Scope of delivery includes transport packaging (wooden crate), not the reduction inserts and other accessories!
• •
• •
CNC Control Unit • Operator guidance from preparation to the end of the jointing process by use of symbols and graphics. • Intuitive data input by touch screen operation (welding standard, material, diameter, SDR, traceability data). • Automatic calculation, regulation and control of the fusion parameters - pressure, time and temperature - according to country specific guidelines. • 10 freely programmable welding cycles available (e.g. for non standard dimensions, special materials etc.). • Selection of language. • Welding report storage on removable standard USB memory key (memory key supplied with the machine) and for safety reasons additionally in the CNC unit. • Data transfer to PC (SUVI WIN-WELD software supplied with the machine) via USB interface. • Robust aluminium case with shock-absorbing plastic cover in attractive design. • Integrated power outlets for planer and heating element. • Easy oil-level-control and refilling without opening the unit. Performance 400 V/5700 W
d-d
Type
[mm]
125 ‐ 400 GF 400 CNC
Part No. 790 153 001 *
USD
31,093.63
Reduction clamping inserts, narrow • Each code number defines 1 piece of reduction clamping insert
d
[mm]
440
Part No.
160 790 112 102 * 200 790 112 104 * 250 790 112 106 *
USD
225.32 225.32 356.04
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
D
Reduction clamping inserts, narrow
D
In order to mount the inserts d 315/d 355/d 400/d 450 to the base clamp d 630, the reduction clamping insert d 500 mm, code 790 117 012, must also be used • Each code number represents 1 piece of reduction clamping insert. Per machine and dimension maximum 8 narrow or wide reduction clamping inserts are needed. • We recommend 4 wide and 4 narrow half shells. d
[mm]
Part No.
USD
315 790 127 111 *
398.55
Reduction clamping inserts set
D
• 4 wide and 4 narrow clamping inserts of each dimension • 8 wide clamping inserts d 315 mm • Reductions in inch sizes or special diameters upon request d-d
[mm]
Part No.
USD
125 ‐ 355 790 127 156 *
6,252.52
GF 400 Crane Part No. 790 127 028
D
USD
Call
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
441
GF 630 CNC Butt Fusion Machine GF 630 CNC Type
D
d-d
Performance
[mm]
GF 630 CNC
315 ‐ 630 400 V/6300 W
Part No. 790 155 001
USD
42,359.44
Reduction clamping inserts set
D
• 4 wide and 4 narrow clamping insets d 315, d 355, d 400, d 450
• 8 wide reduction inserts d 500, d 560 Part No. 790 117 021 *
USD
13,209.69
Reduction clamping inserts, wide In order to mount the inserts d 315/d 355/d 400/d 450 to the base clamp d 630, the reduction clamping insert d 500 mm, code 790 117 012, must also be used • Each code number represents 1 piece of reduction clamping insert. Per machine and dimension maximum 8 narrow or wide reduction clamping inserts are needed. • We recommend 4 wide and 4 narrow half shells. d
[mm]
442
315 355 400 450
Part No. 790 116 012 * 790 116 013 * 790 116 014 * 790 116 015 *
USD
225.32 225.32 225.32 225.32
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
D
Reduction clamping inserts, narrow
D
• Each code number represents 1 piece of reduction clamp-
ing insert. Per machine and dimension maximum 8 narrow or wide reduction clamping inserts are needed. • We recommend 4 wide and 4 narrow half shells. In order to mount the inserts d 315/d 355/d 400/d 450 to the base clamp d 630, the reduction clamping insert d 500 mm, code 790 117 012, must also be used d
[mm]
315 355 400 450
Part No.
USD
790 116 020 * 790 116 021 * 790 116 022 * 790 116 023 *
225.32 225.32 225.32 225.32
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
443
Facing Tool Blade Sets for GF 160-630 Planer Blades set GF 160
D
• Blade has 2 cutting edges (1 set = 2 blades) d-d
[mm]
Part No.
USD
40 ‐ 160 790 113 056 *
171.11
Planer Blades set GF 250
D
• Blade has 2 cutting edges (1 set = 2 blades) d-d
[mm]
Part No.
USD
75 ‐ 250 790 115 024 *
212.56
Planer Blades set GF 315
D
• Blade has 2 cutting edges (1 set = 2 blades) d-d
[mm]
Part No.
USD
90 ‐ 315 790 112 110 *
248.70
Planer Blades set GF 500
D
• Blade has 2 cutting edges (1 set = 2 blades) Part No. 790 116 041 *
USD
283.77
weight [lb]
1.543
Planer Blades set GF 630 • Blade has 2 cutting edges (1 set = 2 pieces) Part No. 790 117 041 *
444
USD
323.09
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
D
IR Plus® Infrared Butt Fusion Technology Features • Non-contact Infrared heating • Completely controlled and repeatable fusion process using our proven overlap system • Minimized and defined weld bead • Proven reliability and safe high purity fusion system • Controlled cooling process based on ambient and bead temperature IR-63 Plus®
• PCMCIA-interface for electronic downloading of fusion data • Integrated interface for label and standard printers (hard copy printout)
IR-225 Plus®
IR-315 Plus®
445
446 3:00
SYGEF PN 10 SYGEF PN 16 SYGEF PN 10 ®
®
®
N/A
3:27
7:17
6:59
63
PROGEF® Natural PN 6
3:23
5:50
5:36
50
5:00
2:32
4:41
4:30
40
PROGEF® Standard
2:32
3:51
3:41
32
3:00
-
6:00
6:00
75
3:30
3:30
7:00
7:30
90
4:30
3:45
8:00
9:00
110
4:00
12:30
160
5:00
15:30
200
5:30
17:30
225
8:00
250
10:00
315
*All times in minutes:seconds and are approximate based on 68°F /20°C ambient temperature. Times only account for heating, joining and cooling of products per the GF Fusion Training Program.
®
IR-315 Plus
IR-225 Plus®
1:48
SYGEF® PN 16
1:48
3:19
®
PROGEF Natural PN 10 2:28
25 2:53
PROGEF® Standard
IR-63 Plus®
20 2:23
Product
Machine
Infared (IR) Plus® Fusion Process Times*
IR63 Plus® Fusion Joining Machine and Accessories IR-63 Plus® Fully-Equipped Machine Model: • Clamping inserts d 20-63 mm (8 pcs. per dimension) • End caps PE d 20-63 mm (4 pcs. per dimension) • Power supply cable 230 V (1 pcs.) • Extension cable for remote weld device (1 pcs.) • Extension cable for heater (1 pcs.) • Extension cable for facing tool (1 pcs.) • Cleaning brush No. 8 (1 pcs.) • Hexagon key 3 mm (1 pcs.) • Hexagon key 4 mm (1 pcs.) • Heater protection shield (1 pcs.) • Clamping unit extension (8 pcs.) • Socket wrench (facing blades) (1 pcs.) • Screw driver, Size 0 (1 pcs.) • Accessory Tray (1 pcs.) • Manual (1 pcs.) • Fully-equipped fusion jointing machine for welding SYGEF Standard, SYGEF Plus, PROGEF Standard, PROGEF Natural, PROGEF Plus, PE 100, PFA in dimensions d 20-63 mm with integrated remote welding unit, 2 USB interfaces, monochrome display with icons and 12 languages. • 1-phase AC (50/60 Hz) 230 V L/N/PE • Machine housing complete (1 pcs.) • Heater assembly (1 pcs.) • Remote weld device (1 pcs.) • Facing tool (1 pcs.) • Transport box (1 pcs.) • Pipe stop (1 pcs.) d-d
Part No.
[mm]
USD
20 ‐ 63 790 131 005 *
weight [lb]
32,383.89
77.162
Power Converter
D
Description
D
Part No.
USD
Power Converter 115/230V AC 790 103 095 *
1,334.89
Clamping Inserts
D
• The clamping inserts are different for each dimension. They are used to clamp and position the pipe components. d
[mm]
* * * * * *
25 32 40 50 20 63
Part No. 150 131 039 150 131 040 150 131 041 150 131 042 * 150 131 038 150 131 043
USD
62.71 62.71 62.71 62.71 62.71 62.71
weight [lb]
0.198 0.115 0.163 0.220 0.309 0.077
Pieces
1 1 1 1 1 1
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
447
Clamping Inserts, IPS
D
• The clamping inserts are different for each dimension. They are used to clamp and position the pipe components.
d
Part No.
[inch]
790 131 446 * 790 131 447 * 790 131 448 * 790 131 449 * 150 131 042 * 790 131 450 *
∕4 ∕2 3 ∕4 1 1 1∕2 2 1
USD
1
weight
Pieces
[lb]
62.71 62.71 62.71 62.71 62.71 62.71
0.126 0.121 0.117 0.112 0.220 0.090
1 1 1 1 1 1
Replacement Blades for Facing Tool
D
• A set includes two facing knives. Each facing knife has four
blades. The blade may be turned three times before it must be replaced.
d-d
Part No.
[mm]
USD
20 ‐ 63 790 131 045 *
Pieces
157.30
2
PE Pipe End Caps
D
• A set includes 4 end caps. The end caps are different for each dimension. The ends of the pipe must be closed. The caps prevent heat loss due to airflow in the fusion zone and guarantee optimum fusion results of the pipe components.
d
[mm]
20 25 32 40 50 63
Part No.
USD
790 131 030 * 790 131 031 * 790 131 032 * 790 131 033 * 790 131 034 * 790 131 035 *
19.13 19.13 24.44 24.44 24.44 31.88
Pieces 4 4 4 4 4 4
Heater Shield Description
D
Part No.
USD
Heater Shield IR63 790 131 051 *
46.76
Extension Cable clamping carriage
D
• Extension cable for remote fusion. d-d
[mm]
448
Part No.
20 ‐ 63 790 131 047 *
USD
472.95
weight [lb]
1.764
Pieces
1
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
Extension Cable facing tool
D
• Extension cable for remote fusion. d-d
[mm]
Part No.
USD
20 ‐ 63 790 131 048 *
155.17
Pieces 1
Extension Cable heater
D
• Extension cable for remote fusion. d-d
[mm]
Part No.
USD
20 ‐ 63 790 131 049 *
559.04
Pieces 1
Power Cord IR63 Description
D
Part No.
USD
Power Cord IR63 150 131 246 *
44.64
Pipe Stop
D
• The pipe stop defines the allowance when the pipes are clamped into position.
d-d
[mm]
Part No.
USD
20 ‐ 63 790 131 046 *
111.60
weight [kg]
0.430
Pieces 1
Adjustment Tools Description
Part No.
Allen Wrench 3mm 150 900 567 * Allen Wrench 4mm 790 131 264 * T-10 Torx Wrench 790 131 129 *
D USD
2.13 9.35 8.50
weight [lb]
0.002 0.086 0.004
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
449
IR-110 Plus® Fusion Joining Machine and Accessories IR-110 Plus Fully-Equipped Machine Model: • Fully-equipped fusion joining machine for welding SYGEF® Standard, SYGEF® Plus, PROGEF® Standard, PROGEF® Natural, PROGEF® Plus, PE 100 (PFA/ECTFE on request) in dimensions d 20-110 mm, 2 USB interfaces, monochrome display with icons and 12 languages. • 1-phase AC (50/60 Hz) 230 V L/N/PE • Machine housing complete (1 pcs.) • Heater and facing tool assembly (1 pcs.) • Transport box (1 pcs.) • Pipe stop (1 pcs.) • Clamping inserts d 20-90 mm (8 pcs. per dimension) • End caps PE d 20-110 mm (4 pcs. per dimension) • Power supply cable 230 V (1 pcs.) • Cleaning brush No. 8 (1 pcs.) • Hexagon keys 4 mm (1 pcs.), 5 mm (1 pcs.), 6 mm (1 pcs.) • Socket wrench (facing blades) (1 pcs.) • Accessory Tray (1 pcs.) • Manual (1 pcs.) d-d
Part No.
[mm]
USD
20 ‐ 110 790 132 001 *
D
46,413.01
Clamping inserts
D
• The clamping inserts are different for each dimension. They are used to clamp and position the pipe components.
d
[mm]
20 25 32 40 50 63 75 90
Part No. 790 132 051 * 790 132 052 * 790 132 053 * 790 132 054 * 790 132 055 * 790 132 056 * 790 132 057 * 790 132 058 *
USD
95.65 95.65 95.65 95.65 95.65 95.65 95.65 95.65
Pieces 1 1 1 1 1 1 1 1
Clamping inserts PFA
D
• The clamping inserts are different for each dimension. They are used to clamp and position the pipe components.
d
[inch]
∕4 ∕2 3 ∕4 1 2 1 1
450
Part No. 790 132 062 * 790 132 063 * 790 132 064 * 790 132 065 * 790 132 066 *
USD
134.98 134.98 134.98 134.98 134.98
Pieces
1 1 1 1 1
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
Replacement Blades for Facing Tool
D
• A set includes two facing knives. Each facing knife has four
blades. The blade may be turned three times before it must be replaced.
d-d
Part No.
[mm]
USD
20 ‐ 110 790 132 061 *
208.31
Pieces 2
PE Pipe End Caps
D
• A set includes 4 end caps. The end caps are different for each dimension. The ends of the pipe must be closed. The caps prevent heat loss due to airflow in the fusion zone and guarantee optimum fusion results of the pipe components.
d
[mm]
20 25 32 40 50 63 75 90 110
Part No.
USD
790 131 030 * 790 131 031 * 790 131 032 * 790 131 033 * 790 131 034 * 790 131 035 * 790 133 036 * 790 133 037 * 790 133 038 *
Pieces
19.13 19.13 24.44 24.44 24.44 31.88 35.07 35.07 43.58
4 4 4 4 4 4 4 4 4
Pipe Stop
D
• The pipe stop defines the allowance when the pipes are clamped into position.
d-d
[mm]
Part No.
USD
20 ‐ 110 790 132 059 *
269.95
Pieces
1
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
451
IR-225 Plus® Fusion Joining Machine and Accessories IR-225 Plus Fully-Equipped Machine with HP Working Table (HP = High Purity)
D
Model: • Fully-equipped fusion jointing machine for welding SYGEF Standard, SYGEF Plus, PROGEF Standard, PROGEF Natural, PROGEF Plus, ecoFIT in dimensions d 63-225 mm, 2 USB interfaces, monochrome display with icons and 12 languages. • Machine base (1 pcs.) • Heater assembly (1 pcs.) • Facing tool (1 pcs.) • Movable clamping units (1 pcs.) • Clamping inserts d 63-225 mm (8 pcs. per dimension) • End caps PE d 63-225 mm (4 pcs. per dimension) • Transportation lock (1 pcs.) • Combination ring /open-jaw wrench 13 mm (1 pcs.) • Cleaning brush (1 pcs.) • Connecting cable 400 V - 230 V (1 pcs.) • Ball for lever (1 pcs.) • Manual (1 pcs.) • 1-phase AC (50/60 Hz) 230 V L/N/PE or 3-phase AC (50/60 Hz) 400 V/230 V L1/L2/L3/N/PE • Working table, HP (1 pcs.) • Pipe stop (1 pcs.) • Hexagon key 5 mm (1 pcs.) • Hexagon key 6 mm (1 pcs.) d-d
Part No.
[mm]
USD
63 ‐ 225 790 133 009 *
66,302.48
HP Stainless Steel Work Table and Transportation Container
D
• Multifunction working table for the IR-225 Plus® fusion joining machine with two integrated drawer. Especially for the use in clean room environment. The working table is made of steel with a stainless steel table.
Part No. 790 133 021 *
USD
Pieces
6,546.92
1
Pipe Clamp Inserts
D
• The clamping inserts are different for each dimension. They are used to clamp and position the pipe components.
d
[mm]
452
63 75 90 110 160 200 225
Part No. 790 133 026 * 790 133 027 * 790 133 028 * 790 133 029 * 790 133 032 * 790 133 033 * 790 133 034 *
USD
163.67 163.67 163.67 163.67 163.67 163.67 163.67
Pieces
1 1 1 1 1 1 1
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
Pipe Clamp Inserts, IPS
D
• The clamping inserts are different for each dimension. They are used to clamp and position the pipe components.
d
[inch]
2 3 4 6 8
Part No.
USD
150 900 442 * 150 900 443 * 150 900 444 * 150 900 445 * 150 900 446 *
Pieces
269.95 269.95 269.95 269.95 269.95
1 1 1 1 1
Replacement Blades for Facing Tool
D
• A set includes two facing knives. Each facing knife has four
blades. The blade may be turned three times before it must be replaced.
d-d
Part No.
[mm]
USD
63 ‐ 225 790 133 046 *
Pieces
366.67
2
PE Pipe End Caps
D
• A set includes 4 end caps. The end caps are different for each dimension. The ends of the pipe must be closed. The caps prevent heat loss due to airflow in the fusion zone and guarantee optimum fusion results of the pipe components.
d
[mm]
63 75 90 110 160 200 225
Part No.
USD
790 131 035 * 790 133 036 * 790 133 037 * 790 133 038 * 790 133 041 * 790 133 042 * 790 133 043 *
Pieces
31.88 35.07 35.07 43.58 64.83 103.09 170.05
4 4 4 4 4 4 4
Adjustable Clamping Station left
D
• The movable, external clamping unit ensure high operat• •
ing convenience. Short pipe pieces can be clamped on both sides. Included in the delivery when a new IR-225 Plus® is ordered. Previous IR 225 fusion jointing machines can be upgraded.
d-d
[mm]
Part No.
USD
63 ‐ 225 790 133 061 *
1,881.18
Pieces
1
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
453
Adjustable Clamping Station right
D
• The movable, external clamping unit ensure high operat• •
ing convenience. Short pipe pieces can be clamped on both sides. Included in the delivery when a new IR-225 Plus® is ordered. Previous IR 225 fusion jointing machines can be upgraded.
d-d
[mm]
Part No.
USD
63 ‐ 225 790 133 062 *
Pieces
1,881.18
1
Pipe Stop
D
• The pipe stop defines the allowance when the pipes are clamped into position.
d-d
[mm]
Part No.
USD
63 ‐ 225 790 133 047 *
75.46
Pieces 1
Adjustment Tools Description
454
Allen Wrench 5mm Allen Wrench 6mm T-25 Torx Wrench Open Wrench 13mm
Part No. 24387005 * 790 101 238 * 790 133 577 * 790 133 140 *
D USD
4.25 12.75 13.82 25.51
weight [lb]
0.176 0.020 0.110
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
Upgrade Programs for IR Plastic Fusion Joining Machines IR 63 Plus Upgrade
D
In order to give you our existing IR-Plus customers the full benefit of the adavantages we offer a modification kit which enables a reconstruction of all existing IR-Plus machines. The following modifications are included:
• • • •
2 USB interfaceds Monochrome display with icons New navigation panel operator guidance in 12 languages
The upgrade of the new IR-Plus components will be executed by Georg Fischer service centres in the USA/Tustin, Singapore and CSO Schaffhausen. Type IR-63 Plus
Part No. 790 131 124 *
USD
8,808.59
IR Plus Upgrade Program Description
Part No.
Left Side Adjustable Clamping Station 790 131 110 * Right Side Adjustable Clamping Station 790 131 109 *
D USD
1,351.90 1,428.42
weight [lb]
Modification Kit
5.952 4.828
D
In order to give you our existing IR-Plus customers the full benefit of the adavantages we offer a modification kit which enables a reconstruction of all existing IR-Plus machines. The following modifications are included:
• • • •
2 USB interfaceds Monochrome display with icons New navigation panel operator guidance in 12 languages
The upgrade of the new IR-Plus components will be executed by Georg Fischer service centres in the USA/Tustin, Singapore and CSO Schaffhausen. Type IR-225 Plus
Part No. 790 133 124 *
USD
8,927.62
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
455
Bead and Crevice Free (BCF®) Plus Fusion
Evolution of Innovation Unsurpassed fusion quality • No beads • No crevices • No transitions • No dead legs and no microorganic deposits • Very high weld strength • Very little stress in the fusion zone, therefore less prone to stress cracking • Controlled and secured manufacturing processes • Globally accepted certification training for quality control personnel and installers
456
457
63
75
10:00
10:00
12:00
14:00
13:00
20:00
18:00
21:00
36:00
20:00
30:00
24:00
110
*All times in minutes:seconds and are approximate based on 68°F/20°C ambient temperature. Times only account for heating and cooling of products per the GF Fusion Training Program.
7:00
11:00
24:00
®
7:00
9:00
SYGEF PN 16
7:00
15:00
6:00
17:00
90
SYGEF® PN 10
®
16:00
50
PROGEF Natural PN 10
40
13:00
32
PROGEF® Natural PN 6
25
BCF® Plus
20
Product
Machine
BCF® Plus Fusion Process Times*
BCF Plus Plastic Fusion Joining Machine BCF® Plus fully equipped machine d 20 63 mm Fully-equipped machine for bead and crevice free jointing of SYGEF Standard, SYGEF Plus, PROGEF Natural of the dimensions d 20-63 mm with integrated remote welding unit, 2 USB interfaces, monochrome display with icons and 12 languages. Supply: 1-phase AC (50/60 Hz) 115 / 230 V L/N/PE Delivery includes: • Machine housing (1 pcs.) incl. remote welding unit (1 pcs.) • Transport box (1 pcs.) • HP working table (1 pcs.) • Heating stations d 20-63 mm (6 pcs.) • Clamping units small (2 pcs.) with clamping inserts d 20-63 mm (24 pcs.) • Facing tool small (1 pcs.) with facing inserts d 20-63 mm (6 pcs.) • Facing tool support (1 pcs.) • Hose box (1 pcs.) incl. air hose (1 pcs.) • Supporting tools small d 20-63 mm (2 pcs.) • BReT (1 pcs.) • Hose cutter (1 pcs.) • Air hose reducer (6-4 mm) (1 pcs.), air hose socket (4-4 mm) (1 pcs.) • Extension cable (1 pcs.) • Manual (1 pcs.) d-d
[mm]
458
Part No.
20 ‐ 63 790 121 002 *
USD
53,565.73
SP
weight [kg]
0
153.000
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
D
BCF® Plus fully-equipped machine d 20 -110 mm
D
Fully-equipped machine for bead and crevice free jointing of SYGEF Standard, SYGEF Plus, PROGEF Natural of the dimensions d 20-110 mm with integrated remote welding unit. Bladders to be ordered separately. Supply: 1-phase AC (50/60 Hz) 115 / 230 V L/N/PE Delivery includes:
• • • • • • • • • • • • • • • • • •
Machine housing (1 pcs.) incl. remote welding unit (1 pcs.) Transport box (1 pcs.) HP working table (1 pcs.) Heating stations d 20-110 mm (9 pcs.) Clamping units small (2 pcs.) with clamping inserts d 20-63 mm (24 pcs.) Clamping units big (2 pcs.) with clamping inserts d 75-110 mm (12 pcs.) Adapter for clamping unit d 75-110 mm (2 pcs.) Facing tool small (1 pcs.) with facing inserts d 20-63 mm (6 pcs.) Facing tool big (1 pcs.) with facing inserts d 75-110 mm (3 pcs.) Facing tool support (1 pcs.) Hose box (1 pcs.) incl. air hose (1 pcs.) Supporting tools small d 20-63 mm (2 pcs.) Supporting tools big d 75-110 mm (2 pcs.) BReT (1 pcs.) Hose cutter (1 pcs.) Air hose reducer (6-4 mm) (1 pcs.), air hose socket (4-4 mm) (1 pcs.) Extension cable (1 pcs.) Manual (1 pcs.)
d-d
[mm]
Part No.
USD
20 ‐ 110 790 121 001 *
SP
65,469.23
weight [kg]
0
188.000
BCF® Plus large dimension package d 75-110 mm
D
• This package is necessary to complete BCF Plus machines which are only equipped for small dimensions d 20-63 mm.
• Delivery includes: • Clamping units big (2pcs.) with clamping inserts d 75-110 mm (12 pcs.)
• Facing tool big (1 pcs.) with facing inserts d 75-110 mm (3 pcs.)
• Supporting tools tall (2 pcs.) • Adapter for clamping unit d 75-110 mm (2 pcs.) • Heater heads not included d-d
[mm]
Part No.
USD
75 ‐ 110 790 121 022 *
5,832.71
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
459
BCF® Plus Heating stations d
[mm]
20 25 32 40 50 63 75 90 110
Part No. 790 121 211 790 121 212 790 121 213 790 121 214 790 121 215 790 121 216 790 121 217 790 121 218 790 121 219
USD
Pieces
Call Call Call Call Call Call Call Call Call
1 1 1 1 1 1 1 1 1
BCF® Bladder for SYGEF® PVDF
D
• Only suitable for welding SYGEF® PVDF and not for PROGEF® Natural. Silver tip.
d
[mm]
20 25 32 40 50 63 75 90 110
Part No. 790 122 041 * 790 122 042 * 790 122 043 * 790 122 044 * 790 122 045 * 790 122 046 * 790 121 047 * 790 121 048 * 790 121 049 *
USD
Pieces
116.91 116.91 124.35 124.35 140.29 157.30 298.65 310.34 337.97
1 1 1 1 1 1 1 1 1
BCF® Plus Bladder for PROGEF® Natural Polypropylene
D
• Only suitable for welding PROGEF® Natural. Blue tip. d
[mm]
20 25 32 40 50 63 75 90 110
Part No. 790 122 091 * 790 122 092 * 790 122 093 * 790 122 094 * 790 122 095 * 790 122 096 * 790 121 047 * 790 121 048 * 790 121 049 *
USD
Pieces
142.42 142.42 151.98 151.98 175.36 198.75 298.65 310.34 337.97
1 1 1 1 1 1 1 1 1
BCF® Plus Facing Tool
D
• Inclusive crank handle, mounting material and clamping in-
serts. Suitable for SYGEF (PVDF) as well as PROGEF Natural.
d-d
[mm]
460
Part No.
20 ‐ 63 790 121 052 * 75 ‐ 110 790 121 053 *
USD
2,023.59 2,618.77
Pieces
1 1
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
BCF® Plus Facing Tool Inserts
D
• These dimension-specific parts are inserted into the facing
tool, in order to be able to face the end of the pipes smoothly and parallel.
d
[mm]
20 25 32 40 50 63 75 90 110
Part No.
USD
790 121 061 * 790 121 062 * 790 121 063 * 790 121 064 * 790 121 065 * 790 121 066 * 790 121 067 * 790 121 068 * 790 121 069 *
Pieces
130.73 130.73 130.73 130.73 130.73 130.73 178.55 178.55 178.55
1 1 1 1 1 1 1 1 1
BCF® Plus Facing Tool Mounting Plate
D
• To attach facing tool on workbench d-d
Part No.
[mm]
USD
20 ‐ 110 790 121 055 *
Pieces
595.17
1
BCF® Plus Clamp Inserts d
[mm]
20 25 32 40 50 63 75 90
Part No.
USD
790 131 038 * 790 131 039 * 790 131 040 * 790 131 041 * 790 131 042 * 790 131 043 * 790 121 036 * 790 121 037 *
62.71 62.71 62.71 62.71 62.71 62.71 88.21 88.21
D
Pieces 1 1 1 1 1 1 1 1
BCF® Plus Hose Reel
D
• For the clean and professional storage of the air hose. d
[mm]
Part No.
USD
4 790 121 151 *
Length
Pieces
[m]
666.38
11
1
BCF® Plus Hose d
[mm]
Part No.
USD
4 790 122 087 *
34.01
D Length [m]
11
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
461
BCF Air Hose Reducer Size [mm]
Part No.
USD
4 x 6 790 122 103 *
D
20.82
BCF® Plus Supporting Tool d-d
[mm]
Part No.
USD
20 ‐ 63 790 121 072 * 75 ‐ 110 790 121 073 *
D
Pieces
476.14 654.69
1 1
BCF® Plus Bladder Removal Tool Part No.
USD
790 121 075 *
130.73
D
Pieces 1
Modification Kit
D
In order to give our existing BCF Plus customers the full benefit of the advantages we offer a modification kit which enables a reconstruction of all existing BCF Plus machines. The following modifications are included: • 2 USB interfaces • Monochrome display with icons • New navigation panel • operator guidance in 12 languages The upgrade of the new BCF Plus components will be executed by Georg Fischer service centres in the USA/Tustin, Singapore and CSO Schaffhausen. Type BCF Plus
462
Part No.
USD
790 121 124 *
9,046.66
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
Accessories for IR and BCF Plastic Fusion Joining Machines Tangit KS-Cleaning Tissues
D
• Wet Tangit cleaning tissues to clean the fusion faces • One box contains 100 tissues Part No. 799 298 024 *
USD
26.57
weight [lb]
0.734
IR Plus® Win Weld Program
D
• The PC data transfer software makes it possible to manage and evaluate easily the recorded fusion data as required.
• incl. Record card / USB stick Standard
Part No.
WIN 2000/XP 790 131 471 * WIN 95/98/Me 790 131 472
USD
Pieces
812.41 773.73
1 1
D
BCF® Plus Win-Weld Program • incl. Record card / USB stick • The PC data transfer software makes it possible to manage and evaluate easily the recorded fusion data as required.
Standard
Part No.
WIN 2000/XP 790 121 471 * WIN 95/98/Me/NT 790 121 472
USD
773.73 773.73
Pieces 1 1
Step-Up and Down Transformer Description
*
*
Part No.
Step-Down 480V 150 000 011 to 400V Step-Up 220V to 150 000 036 400V
USD
3,826.80 3,826.80
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
463
Thermal Transfer Labels
D
• Label size: 38 x 19 mm • Specification information available on request from George Fischer.
• The labels are made of white polyester. The printing, as well • • • • •
as the labels themselves, are resistant against: UV resistant Temperatures up to 140 °C (284 °F) Up to 95% humidity Cleaning agents (Isopropylalcohol etc.) Two identical labels are printed for each weld. Each roll contains 2500 labels.
Part No. 790 131 028
464
USD
Call
SP
weight [kg]
1
0.400
Pieces
1
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
Rental Program Electro Plus
D
• Prices are daily, prorated by calendar day, billed by the end of the month
• Complete Electro Plus Fusion Machine d-d
[inch]
∕2 ‐ 12
1
Description
Part No.
USD
Electro Plus R150000001B
13.14
MSA250
D
• Prices are daily, prorated by calendar day, billed by the end of the month
• Includes Cable Assembly, Bar Code Set with Continuity Tester and Carrying Case
d-d
[inch]
∕2 ‐ 12 ∕2 ‐ 12
1
Description
MSA250 SE, 115V AC R799350500B MSA250 EX Multi, 230V AC R799350520B
1
Part No.
USD
13.14 13.14
MSA 330/340
D
• Prices are daily, prorated by calendar day, billed by the end of the month
• Includes Cable Assembly, Bar Code Set with Continuity Tester and Carrying Case
Description
Part No.
MSA 330 230V MSA 340 230V MSA 330 115V MSA 340 115V
R790160005B R790160012B R010011335B R150900564B
USD
13.40 13.40 13.40 13.40
SG110/SG125 Socket Fusion Machines
D
• Prices are daily, prorated by calendar day, billed by the end of the month
• Rental does not include heater bushings or peeling tools; these items must be purchased separately
d-d
[mm]
16 ‐ 110 20 ‐ 90
Description
Part No.
SG110 Socket Fusion Machine R790310003B SG125 Socket Fusion Machine R790310036B
USD
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
28.16 28.16
465
Contact Butt Fusion Machines
D
• Prices are daily, prorated by calendar day, billed by the end of the month
• The GF315 is equipped with an automatic heater d-d
Description
[mm]
20 ‐ 110 40 ‐ 160 75 ‐ 250 90 ‐ 315 200 ‐ 500 315 ‐ 630
Part No.
MC110 TM160 GF250 GF315 CNC GF500 TM 630
USD
R790109321B R790114061B R790115030B R790112030B R790116040B R790117069B
Call 52.57 71.35 97.64 116.41 128.42
Type 515 Diaphragm Valve Assemble/Disassemble Tool
D
• Prices are daily, prorated by calendar day, billed by the end of the month
Size [inch]
1 1 ∕4 1 1∕2 2 1
Part No. 150 515 001 150 515 002 150 515 003 150 515 004
USD
Call Call Call Call
Rental Part No.
USD
R150515001B R150515002B R150515003B R150515004B
Call Call Call Call
IR Plus Machines
D
• Prices are daily, prorated by calendar day, billed by the end of the month
• A power converter (115/230V AC) is included with the IR63 and IR110 machine
d-d
Description
[mm]
20 ‐ 63 20 ‐ 63 20 ‐ 110 63 ‐ 225 250 ‐ 315
IR63 Plus IR 63 with PFA Software and 1/4-2" inserts IR110 Plus IR225 Plus IR315 Plus
Part No.
USD
R790131005B R155131005B R790132001B R790133009B R790134001B
BCF Plus Machine the month
• Rental includes facing tool and remote head. Rental does not
include bladders and air hose which must be purchased separately.
[mm]
466
20 ‐ 63 75 ‐ 110
Description
D
• Prices are daily, prorated by calendar day, billed by the end of
d-d
78.86 90.13 93.88 103.27 127.68
Part No.
BCF Plus R790121002B BCF Plus Extension Package R790121022B
USD
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
90.13 7.51
Pipe Cutter Tools
D
• Prices are daily, prorated by calendar day, billed by the end of the month
• Rental does not include cutting blades, which must be purchased separately
d-d
Description
[mm]
110 ‐ 250 110 ‐ 250 160 ‐ 355 315 ‐ 500
Part No.
PPC 250 PPC 250 HP KS 355 KS 1600
USD
R790201002B R790201011B R790202001B R790109601B
21.61 16.90 21.61 31.92
EX 360E Pipe Cutter • Prices are daily, prorated by calendar day, billed by the end of the month Part No.
USD
Description
R150100300B
25.77
75mm - 360mm (3" - 14") Pipe Cutter
COOL-FIT® Pipe Calibration Tool
D
• Prices are daily, prorated by calendar day, billed by the end of the month
• including transportation case
Model: • To calibrate pipe inner diameters of COOL-FIT pipes d-d
Part No.
[mm]
USD
140 - 225 R790205001B *
13.14
weight [lb]
0.002
closest inch [inch]
5-8
Rotary Peeler RS
D
• Prices are daily, prorated by calendar day, billed by the end of the month
d
[mm]
63 75 90 110 160 225 250
Part No.
USD
R790136003B R790136004B R790136005B R790136006B R790136009B R790136012B R790136013B
5.15 5.15 6.19 6.19 7.22 8.25 8.25
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
467
Step-Up and Down Transformer
D
• Prices are daily, prorated by calendar day, billed by the end of the month
Part No.
USD
R150000036B R150000011B
Description
10.62 Step-Up 220V to 400V Step-Down 480V 10.62 to 400V
Double clamp
D
• Prices are daily, prorated by calendar day, billed by the end of the month
d-d
[mm]
468
Part No.
USD
63 - 110 R799301484B 110 - 225 R799301486B 225 - 250 R799301488B
5.15 6.19 8.25
^ = 40% Restock Charge * = Non-Cancelable/Non-Returnable
Machine Rental Agreement This agreement is made as of the ____________ day of _______________ 20_______, between Georg Fischer LLC and _____________________________________________________ _____________________________________________________ _______________________________(Herein named Distributor) This rental agreement covers the rental of the following products/machines: _________________________ Serial Number _______________ _________________________ Serial Number _______________ _________________________ Serial Number _______________ _________________________ Serial Number _______________ Other items/accessories: _______________________________ _____________________________________________________ _____________________________________________________ _____________________________________________________ _____________________________________________________ Rental charges begin 7 days after shipping date and end on date machine is received at Georg Fischer and are based on a daily rate prorated by calendar days. The distributor will be invoiced for rental charges at the end of the starting rental month and each month thereafter until the conclusion of the rental agreement and return of rented equipment. Georg Fischer will not assume any responsibility for delays in shipment due to shipping errors, strikes or circumstances beyond its control. Default Remedies If Distributor fails to pay any rental payment or other sum due Georg Fischer hereunder in a timely manner or fails to observe, keep or perform any other provision of this agreement required to be observed, kept or performed by Distributor, and does not cure such default within 5 days after notice from Georg Fischer, then Georg Fischer shall have the right to:
of availability of rental equipment. Maintenance During the term of this Agreement, Distributor shall be responsible for maintaining, or causing to be maintained, the Equipment by providing or causing to be provided, routine preventative maintenance and inspection services, to assure proper operation thereof. In addition, Distributor shall be solely responsible for any and all repairs and maintenance required to be made to the Equipment during the term of this Agreement. Use of Equipment Distributor shall insure that the Equipment is used in a careful and proper manner and in strict conformity with the purposes and functions for which it was designed and is intended to be used, shall insure compliance in all respect with the operating and routine operator maintenance procedures as described in any manuals relating to the Equipment supplied to Distributor by Georg Fischer and shall comply with and conform to all applicable federal, state and municipal laws, ordinances and regulations relating to the possession, use or operation of the Equipment. In addition, Distributor shall not modify, alter, or change in any way the equipment. Receipt of Equipment by Distributor When Equipment is received by the Distributor, it is the responsibility of the Distributor to check the contents and packing slip to determine if all material is correct. Any discrepancies must be reported in writing to a Georg Fischer representative within 7 days after receipt of said Equipment by Distributor. Return of Rented Equipment
(d) Pursue any other available remedy to Georg Fischer at law or in equity.
All Equipment must be returned by the designated reshipment date and clearly tagged and identified with the RMA number. The distributor has to inform Georg Fischer about any circumstances that will affect the designated date of reshipment. Such notice has to be given at least 20 days prior to the designated day. The Equipment must be returned in the original container, properly packed and labeled. Lost, damaged, non-repairable shipping containers will be charged to the Distributor according to the Georg Fischer then effective Billing Procedures. The freight carrier must be approved by Georg Fischer. No machines shall be shipped by UPS without specific authorization from Georg Fischer LLC. All BCF and IR-63 machines shall be secured to a shipping pallet for all shipments. All C.O.D.s will be refused. All Equipment must be returned directly to Georg Fischer in Tustin, CA for inspection. A normal rework time of 2 hours is allowed per piece of Equipment. Rework time of more than 2 hours for a piece of Equipment will be charged to the Distributor according to the Georg Fischer then effective Billing Procedures.
Obligation of Distributor Continues
Equipment Failure
Notwithstanding any repossession of any item of Equipment by Georg Fischer or any other action which Georg Fischer may take, Distributor shall be and remain liable for the full performance of all of its obligations under this Agreement.
Georg Fischer reserves the right to repair or replace any rental equipment which fails. When equipment must be returned to Georg Fischer for repairs or replacement before the end of the rental, and these repairs are due to normal wear and tear, Georg Fischer will pay for the surface shipping fees to Georg Fischer and return. Carrier must be a Georg Fischer approved carrier, see Return of Rented Equipment for details.
(a) Sue for and recover all rents and other payments then accrued or thereafter accruing under this agreement; (b) Take possession of any or all of the items of Equipment covered by this Agreement, without demand or notice to Distributor, wherever the Equipment may be located, without any court order or other process of law, in which event Distributor grants Georg Fischer access and waives any and all damages occasioned by such taking of repossession, including, but not limited to, any damage caused to Distributor's premises in connection with the removal of the Equipment. (c) Terminate this Agreement as to any or all items of Equipment covered by this Agreement; or
Availability of Rental Equipment Georg Fischer does not guarantee the availability of rental equipment and will under no circumstances be liable for any loss of any nature, directly or indirectly arising from the lack
Item #M245 (4/2014)
page 1 of 3
469
Insurance Distributor shall name Georg Fischer as an additional named insured, with respect to the equipment, on Distributor's insurance policies covering all risk or hazards to the equipment. DISCLAIMER Georg Fischer will under no circumstances be liable for any loss or damage of any nature, directly or indirectly arising from any injury caused to the operator of the Equipment, so long as the Equipment is in the possession and/or control of Distributor or any third party. DISCLAIMER OF WARRANTIES Georg Fischer makes no express or implied warranty of any kind whatsoever with respect to the equipment including, but not limited to: the merchantability of any item of equipment or its fitness for any particular purpose; the design or condition of any item or equipment; the quality or capacity of any item of equipment; the workmanship in any item of equipment; compliance of any item of equipment with the requirements of any law, regulation, specification or contract pertaining thereto; patent infringement; or patent defects. Georg Fischer shall not be liable for any loss or damage, directly or indirectly arising from the use of the equipment for any incidental, special or consequential damages, such as loss or profits, loss or production, loss of use or loss of contract, arising for any reason, including damages resulting from defective design, materials or workmanship or from faulty instructions and whether such damages are claimed to arise from breach of contract, in tort, the theory of product liability or otherwise. General Provisions Georg Fischer’s Inspection Rights Georg Fischer shall, at any time and all times during regular business hours of Distributor or User, have the right to enter the premises of Distributor or User where the Equipment may be located for the purposes of inspecting the same or observing its operation and use. Distributor shall give Georg Fischer immediate notice of any attempted or actual attachment or other judicial process or levy affecting any of the Equipment. Ownership of Equipment Georg Fischer, Distributor and User acknowledge and agree that Distributor or User has no right, title or interest in or to the Equipment except for the rental interest set forth in this Agreement. To the extent necessary to affirm Georg Fischer's ownership interest in the Equipment, Distributor or User shall permit Georg Fischer to affix a label to each item of Equipment indicating Georg Fischer's ownership interest. This Agreement is intended by the parties hereto to create a rental agreement and not a sale, conditional sale, consignment or any other legal relationship. Upon request by Georg Fischer, Distributor or User agrees to execute UCC-1 financing statements, in form satisfactory to Georg Fischer, evidencing the rental of the Equipment pursuant to this Agreement. Georg Fischer, as the owner of the Equipment, shall be entitled to such deductions, credits and benefits as are provided by the Internal Revenue Code of 1986, as amended to the date hereof or at any time hereafter, to an owner of personal property including, without Item #M245 (4/2014)
470
limitation, any investment tax credit with respect to the Equipment. No Encumbrances or Liens: Notice Distributor shall not pledge, encumber, create a security interest in or permit any lien to become effective on or with respect to any of the Equipment. If any of these events take place, Distributor shall be deemed to be in default of this Agreement. Distributor shall immediately notify Georg Fischer of any such liens, charges or other encumbrances of which Distributor has knowledge. Distributor shall immediately pay or satisfy any obligation from which any such lien, charge or encumbrance arises, and shall otherwise keep the Equipment and all right, title and interest therein free and clear of all such liens, charges and encumbrances. Distributor shall deliver to Georg Fischer appropriate satisfactions, waivers or evidence of payment or satisfaction of any such obligation. Risk of Loss All risk of loss, damage, theft or destruction of or to the Equipment shall be borne by Distributor. No such loss, damage, theft or destruction of or to the Equipment in whole or in part, shall impair the obligations of Distributor under this Agreement, all of which shall continue in full force and effect; and Distributor, at Georg Fischer's option, shall: (a) place the affected Equipment in good repair, condition and working order; (b) replace the same with like Equipment in good repair, condition and working order; (c) pay Georg Fischer an amount equal to all unpaid rent due and to become due under this Agreement during the term of this Agreement or (d) pay Georg Fischer the full replacement value of the affected Equipment. Indemnification of Georg Fischer Distributor shall indemnify and defend and hold Georg Fischer, its officers, directors, shareholders, agents, legal representatives, successors and assigns, and each of them, harmless from and against any and all claims, liabilities, actions, suits, proceeding, damages, judgments, costs and expenses, including attorneys's fees, arising out of, connected with or resulting from: (a) Distributor's and/or Distributor's employees', agents' or invitees' use or misuse of the Equipment; or (b) the breach by Distributor of any covenant or obligation contained in this Agreement to be performed or observed by Distributor. The terms of this paragraph shall specifically survive the termination of this Agreement. Governing Law This Agreement will be construed and enforced in accordance with the internal laws of the State of California without regard to its conflicts law. Recovery of Litigation Costs If any arbitration or other legal proceeding is brought for the enforcement of this Agreement, or because of any alleged dispute, breach, default or misrepresentation in connection with or arising out of any of the provisions of this Agreement, the successful or prevailing party will be entitled to recover such party's reasonable attorneys' fees and other costs incurred by such party in such arbitration or other legal proceeding, in addition to any other relief to which such party or parties may be entitled. Severability In the event that any provision or any part of any provision of this agreement is held to be illegal, invalid or unenforceable, such illegality, invalidity or unenforceability will not affect the
page 2 of 3
validity, legality or enforceability of any other provision or part thereof. Successors and Assigns. This Agreement will not be assignable by either party without the prior written consent of the other party. Waiver Failure to insist on compliance with any of the terms, covenants or conditions hereof will not be deemed a waiver of such terms, covenants or conditions, nor will any waiver or relinquishment of any right or power hereunder at any one time or more times be deemed a waiver or relinquishment of such rights or powers at any other time or times.
THIS AGREEMENT is made as of the _____________ day of _______________, 20______ between Georg Fischer LLC and: Co: ________________________________________________ By: _________________________________________________ Print: ________________________________________________ and Georg Fischer: ______________________________________ Print: _______________________________________________ SPECIAL TERMS: _________________________________________________________________________________________ _________________________________________________________________________________________________________ Effective start date: _______________End date:______________ Approved by: __________________________________________ PO Number: __________________________________________
Transformer or converter may be required to operate Georg Fischer welding equipment. I have read and understand the power requirement for the equipment rented.
Item #M245 (4/2014)
page 3 of 3
471
