FULL HD SPORTS WIFI CAMERA USER MANUAL

FULL HD SPORTS WIFI CAMERA USER MANUAL Thank you for purchasing the 3SIXT Full HD Sports Action WiFi Camera Before getting started, please read thi...
38 downloads 1 Views 784KB Size
FULL HD SPORTS WIFI CAMERA

USER MANUAL

Thank you for purchasing the 3SIXT Full HD Sports Action WiFi Camera Before getting started, please read this User Manual* FULLY and carefully to ensure correct operation and optimised performance.

FULL HD SPORTS WIFI CAMERA

Important information to keep your camera and captured videos/images safe • Please check the camera operates normally before use. • Do not expose the camera to direct sunlight, or point its lens to sunlight - the image sensor may get damaged. • Take good care of the camera and prevent water or sand particles from entering the housing when it is used on the beach or in water. Water, sand particles, dust or composites containing salt may damage the camera.

2

*The screen display and images used in this User Manual are for illustration purposes only and may differ on actual unit.

Please see page 19 for more information on correct use of supplied Waterproof Case. • Keep the camera free of dust and chemical materials. Place it in a cool, dry and well ventilated environment. Do not place the camera in a high temperature, moist or dusty place. • If dust is accumulated on the camera or on its lens - use a soft, clean and dry cloth to wipe away the build-up gently. • Do not use a cloth to wipe dirt or sand particles. Blow them away gently then wipe the camera gently with a cloth suitable for optical devices. • Do not use solvents to clean the video camera. • Do not touch the lens surface with your fingers. • This camera supports a microSD Memory Card (not included) up to 32GB. For best results, we recommend using Lexar Class 10 microSD cards. Please insert a microSD card before use. A microSD card is not included with this product and needs to be purchased separately. • Memory cards are manufactured from precise electronic components. Data may be lost or damaged if the card is taken out or power supply is interrupted when the camera or computer is connected to the memory card (i.e. during reading, writing and formatting). 3

Buttons, Connections and LCD Panel

1

2

3

See page 6 for more detail

6 12 7 4

4

13

5

1

Shutter Button

4

Lens

2

Built-in microphone

5

WiFi Button/Status Indicator

3

LCD Panel

6

Power/Mode Button

3 2 1

See page 6 for more detail

4 8 9 10 11 7

Infrared Light

11 External Microphone Port

8

micro USB Port

12 Battery Cover Switch

9

Mini HDMI port

13 Status LED

10 microSD Card Slot

5

1

2

3

4

5

7

6

9

1

Camera Mode

2

Video Mode

3

WiFi (displayed when enabled)

4

microSD card (displayed when card inserted)

5

Photo resolution/video size*

6

Mute mode (displayed when enabled)

7

Photo counter (displays up to 999)

8

Video recording timer (displays hrs and mins)

9

Battery power status

* In camera mode - HI = 8MP, Lo = 5MP. In video mode - HI = FullHD (1920 x 1080 @ 30fps), HILo = 1280 x 720 @60fps, LO = HD (1280 x 720 @ 30fps)

6

Installing and charging the battery Installing the battery First make sure that the camera is off when inserting or removing the battery. 1. Slide up the battery cover switch 12 while sliding the back open in the direction of the arrow to open the battery cover. 2. Insert the lithium battery into the battery compartment. Make sure the contacts of the battery are corresponding to the symbols on the camera body. 3. Return the battery cover by placing it back then sliding it firmly in the opposite direction of the arrow until it clicks into place. Charging the battery 1. Make sure that the camera is switched off. If the camera is switched on, the battery will not charge. 2. Connect the camera’s micro USB port 8 with a PC or MAC via the USB cable to start battery charging. The status LED 13 will be lit blue while charging and will disappear when charging is completed.

Numbers in black circles refer to diagrams on pages 4 & 5

7

Installing a microSD memory card Use memory cards with speeds faster than Class 4 and up to 32GB. We recommend Lexar Class 10 microSD memory cards for FullHD video capturing. 1. Make sure the cameras is off when inserting or removing the microSD card. 2. Make sure the memory card is inserted in the correct direction (the gold contacts of the microSD card should face the front of the camera) into the microSD card slot 10 . Failure to do so may lead to damaged or lost data. 3. To remove the memory card, press down on the memory card until it clicks and pops up. If a microSD card is removed or power supply is interrupted when the camera or computer is connected to the memory card (i.e. during reading, writing and formatting) your captured images and video may be lost or damaged.

8

Numbers in black circles refer to diagrams on pages 4 & 5

Turning On/Off and Mode Selection Install the battery, charge fully and insert the microSD card as described on pages 7 & 8. Turning on the camera Press and hold the Power/Mode Button ( 6 ) for 4 seconds until the LCD panel 3 displays ON and a beep sound is heard. Turning off the camera Press and hold the Power/Mode Button for about 4 seconds until the LCD panel 3 displays OFF and a beep sound is heard. The camera will be automatically shut down after 5 minutes if not used to save power. Scrolling through modes After the camera is turned on, press the Power/Mode Button

to switch through modes:

1. HI Video (FullHD @ 30fps) 2. Lo Video (HD @ 30fps) 3. HILo Video (HD @ 60fps) Numbers in black circles refer to diagrams on pages 4 & 5

4. HI Camera (8MP) 5. Lo Camera (5MP) 6. Back to HI Video 9

Video Mode To record a video, make sure the camera is in video recording mode which should be displayed on the LCD panel 3 . If not, short press the button repeatedly until appears. To START recording Short press the Shutter ( 1 ) button. The video icon and the [ : ] on the LCD panel 3 will flash. The Infrared Light 7 will flash red which indicates that a recording is in progress. To STOP recording Short press the Shutter ( 1 ) button. The video icon and the [ : ] on the LCD panel 3 will STOP flashing. The Infrared Light 7 will also stop flashing which indicates that a recording has ceased. When the microSD memory card is full or the battery is drained, recording will cease automatically. The recorded video will be saved before the camera goes off.

10

Numbers in black circles refer to diagrams on pages 4 & 5

Photo Capture Mode To take a still image, make sure the camera is in photo capture mode which should be displayed on the LCD panel 3 . If not, short press the button repeatedly until appears. To capture an image Short press the Shutter ( 1 ) button. There will be a beep sound and the Infrared Light 7 will flash red which indicates that an image is being processed by the camera.

Sound Setting Mode Sound is enabled by default. In video or photo mode, press and hold the Shutter ( 1 ) button to mute sound. The mute icon will be displayed on the LCD panel 3 when the sound is muted. Long press the Shutter the sound.

Numbers in black circles refer to diagrams on pages 4 & 5

(

1

) button to activate

11

Enabling WiFi Connection for viewing, recording, playback and download* You can view, record, playback and download your captured videos and images using the cameras in-built WiFi, connected to compatible iOS and Android devices using the dedicated app, SYMAGIX. Getting SYMAGIX and connecting to your device For iOS devices 1. Find the SYMAGIX app at the iTunes app store on your device or scan this QR Code - and install it. When installation is completed, the SYMAGIX icon will show on your home/menu screen. 2. Make sure a microSD card is in your camera and turned ON. 3. Press the WiFi/Status Button ( 5 ) on the side of the camera to active the camera’s WiFi. When the camera’s WiFi is starting up, the WiFi/Status Button ( 5 ) will be flashing. When the camera’s WiFi is ready, the WiFi/Status Button ( 5 ) will stay red and WiFi icon will be displayed on the LCD panel 3 . 12

Numbers in black circles refer to diagrams on pages 4 & 5

1. Go to Settings > WiFi on your iOS device, then scan or wait until 3SIXT5000 becomes available in your list of available networks. 2. Select 3SIXT5000 from the list and when prompted enter the password 1234567890 and wait for confirmation of a connection. 3. Exit iOS Settings, then select the SYMAGIX icon your home/menu screen.

on

What you should see on your iOS device while SYMAGIX app is open and connected to your camera’s WiFi:

1

3

2

4

5

7

6

8

1

Battery power status 4

Setup menu

7

Photo mode

2

Video resolution

5

Playback mode

8

Video mode

3

White balance

6

Shutter

*Playback may not be supported on some devices.

13

For Android devices* 1. Find the SYMAGIX app at the Google Play store on your device or scan this QR Code - and install it. When installation is completed, the SYMAGIX icon will appear on your home/menu screen. 2. Make sure a microSD card is in your camera and turned ON. 3. Press the WiFi/Status Button ( 5 ) on the side of the camera to active the camera’s WiFi. When the camera’s WiFi is starting up, the WiFi/Status Button ( 5 ) will be flashing. When the camera’s WiFi is ready, the WiFi/Status Button ( 5 ) will stay red and WiFi icon will be displayed on the LCD panel 3 . 4. Go to Settings > Connections > WiFi then scan or wait until 3SIXT5000 becomes available in your list of available WiFi networks. Please see your Android’s device user manual for specific instructions. 5. Select 3SIXT5000 from the list and when prompted enter the password 1234567890 and wait for confirmation of a connection. 6. Exit Settings, then select the SYMAGIX icon home/menu screen. 14

on your

Numbers in black circles refer to diagrams on pages 4 & 5

What you should see on your Android device while SYMAGIX app is open and connected to your camera’s WiFi:

1

5

2

6

3

7

4

8

1

Video resolution

4

Playback mode

7

Video mode

2

White balance

5

Shutter

8

WiFi signal

3

Setup menu

6

Photo mode

9

Battery power status

*Playback may not be supported on some devices.

15

Downloading captured videos and images to external devices via cable Connecting to a PC or MAC using supplied micro USB cable 1. Turn the camera ON and connect it to PC or MAC via supplied micro USB cable. 2.

will be then be displayed on the LCD panel 3 .

3.  For PC: Your captured videos and images will be located in My Computer > Removable Disc. For MAC: Your captured videos and images will be located in the desktop item No Name.

Playback and delete captured videos and images on a HDTV via cable Connect to a HDTV using a HDMI cable (not supplied) 1. Before connecting or removing the HDMI cable, stop any recording and disconnect the WiFi connection. 16

2. Connect the a HDMI cable (Mini HDMI) between the camera and a HDTV. 3. For playback mode, short press the Power/Mode Button ( 6 ) to switch between videos and photos. When there are several videos or photos, press the WiFi/Status Button ( 5 ) to select the desired video or photo. When a video clip is selected, press the Shutter ( 1 ) button to start playback and press the Shutter ( 1 ) button again to stop playback. 4. When the camera is connected to a HDTV the LCD panel 3 will show the following:

1

2

3 1

Playback Mode (e.g camera is currently in Playback Mode)

2

File Number (e.g There are 31 files and the current file is 19)

3

File Type (Video Clip or Still Image)

Numbers in black circles refer to diagrams on pages 4 & 5

17

Downloading captured videos and 5. In Playback Mode, press and hold the Shutter images toand external viamemory cable ( 1 ) button a prompt fordevices file deletion and formatting will appear. 6. Press the WiFi/Status Button ( 5 ) to switch between file deleting and memory formatting. Press the Power/ Mode Button ( 6 ) to select YES or NO. 7. Press the Shutter

(

1

) to confirm and exit.

Capturing video and images using Remote Control You can use the remote control to record videos, take photos and turn OFF the camera. When using the remote control, make sure that the signal emission port on the remote control is pointing to the infrared light 7 on the camera. 1. Press the video button stop the recording.

to record a video and

2. Press the photo button

to take a photo.

3. Press the Power button

to turn camera OFF.

18

Special instructions for Waterproof Case The camera is only submersible up to 2M if it is correctly sealed within the supplied Waterproof Case. Before sealing the Waterproof Case, keep the camera housing’s rubber seal clean. A single hair or grain of sand can cause leaking. You must test it by closing the case without inserting the camera. Submerse the case completely in water for about one minute. Remove the case from the water, dry off its exterior with a towel, and then open the case. If the interior is dry, the case is safe for use under water. • After use in salt water you will need to rinse the case appearance parts with fresh water and dry it. This will prevent corrosion of the hinge pin, which can cause failure. • To clean the seal, rinse in fresh water and wind dry (drying with a cloth may cause lint to compromise the seal). Re-install the seal into the grooves in the backdoor of the housing. Failure to test the Waterproof Case before use may lead to subsequent damage of your camera and void warranty. 19

Limitation of Liability and Indemnity Intended use To the maximum extent permitted by applicable law, 3SIXT shall not be liable for any damages suffered as a result of using, modifying, contributing, copying, distributing, or downloading the materials, use of the 3SIXT FullHD Sports Action WiFi Camera User Manual or use of any 3SIXT product and/or related apps. In no event shall 3SIXT be liable for any indirect, extraordinary, exemplary, punitive, special, incidental, or consequential damages (including, without limitation, loss of data, revenue, profits, use or other economic advantage) however arising, whether for breach of contract or in tort, even if 3SIXT has been previously advised of the possibility of such damage. You agree that you have sole responsibility for adequate protection and backup of data and/ or equipment used in connection with the product and software and will not make a claim of any nature against 3SIXT for lost data, inaccurate output, work delays or lost profits resulting from the use of the materials. You agree to indemnify, hold harmless and defend 3SIXT, together with its affiliates, parent and subsidiary entities, successors, assigns, partners, managers, members, employees, officers, directors and shareholders, from and against any and all damages, liens, liabilities, losses, demands, actions, causes of action, claims, costs and expenses (including, without limitation, reasonable attorneys’ fees, charges and disbursements, as well as the cost of in-house counsel and appeals) arising from or related to 3SIXT, the use of the 3SIXT FullHD Sports Action WiFi Camera User Manual or any 3SIXT

product and/or related apps. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. The camera’s WiFi should only be used to establish a data connection to your device via a wireless network with a wireless router or other wireless-enabled device. Any other use or extended use is not supported. Any claims for damage resulting from improper use are excluded. The risk is with the operator.

Limitations of liability Referenced websites/apps The 3SIXT FullHD Sports Action WiFi Camera User Manual may contain or reference links to third-party sites and apps, however, please be aware that 3SIXT is not responsible for and cannot control these other sites/apps. 3SIXT makes no representations or warranties whatsoever about any other websites/apps which you may access as a result of reading this User Manual, or otherwise.

1 Year Warranty 3SIXT will replace the faulty product at no cost to the consumer. The warranty does not extend to any consequential damages or costs that may be incurred and is valid for 1 year from date of purchase. The consumer must return the faulty product to the retail store it was purchased from together with proof of purchase. The benefits to the consumer under this warranty are in addition to other rights and remedies of the consumer under Australian and New Zealand laws in relation to the goods to which the warranty relates. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Due to possible user resealing error, this product is not covered under warranty against Waterproof Case leakage or any resulting damage. Please review and follow the instructions carefully when sealing the Waterproof Case. The warranty is provided by: Australia: Cellnet Group Limited 59-61 Qantas Dr, Eagle Farm, QLD 4009 Phone: 1300 CELLNET (1300 235 563) Email: [email protected]

New Zealand: Cellnet Limited 10a Orbit Dr, Rosedale, Auckland 0632 Phone: 0800 CELLNET (0800 235 563) Email: [email protected].

Specifications Image Sensor

CMOS sensor

Lens

F/3.1, f = 2.9 mm, View Angle 120°

Video Resolution

1920 x 1080 (1080p @30fps) 1280 x 720 (720p @60fps) 1280 x 720 (720p @30fps)

Picture Resolution

8MP (3264 x 2448) 5MP (2592 x 1944)

Storage Media (not included)

microSD/microSDHC (up to 32GB)

File Format

JPEG / MOV (H.264)

Interface

Mini HDMI / micro USB

Power Source

3.7V rechargeable Lithium-ion battery

Built-in WiFi

802.11 b/g/n

Dimensions

61 x 38 x 25 mm

Weight

60g (battery excluded)

What’s included in this box:

CAMERA

WATERPROOF CASEˇ

MICRO USB CABLE

BIKE MOUNT

REMOTE CONTROL

HELMET MOUNT

3sixtgear.com

HELMET BAND