Fluorescent Luminaires

222

WWW.FINELITE.COM

Series 12-ID

Series 16

High Performance Recessed

Series 18 Edge

Series 15

Check out our complete line of products in the following pages...

WWW.FINELITE.COM

223

High Performance Recessed Collection The Finelite High Performance Recessed (HPR) luminaire creates an ideal

balance of energy efficiency, high visual comfort, and affordability. Ranging in size from 1x1 to 2x4, our recessed luminaires accommodate T8, T5, T5HO, high lumen twin and triple tube compact fluorescent lamps. Our High Performance Recessed (HPR) collection offers sizes and configurations to meet all of your lighting needs.

224

WWW.FINELITE.COM

Project: UCSD Sustainable Resources Center Location: La Jolla, CA Architect: Jimmy Sullivan of Citizen Design Product: High Performance Recessed (HPR) 2x2 Representative: OSC Lighting and Control, Inc.

WWW.FINELITE.COM

225

HPR 2x2 HPR 2x4

Feature Spotlight

100% Serviceable from Below

Door Designs

Light Engine 4” HPR-F (Flat)

HPR-A (Angled)

24”

ANR- ANGLE NARROW RAIL (OPTIONAL)

Shielding Options FT40/50/55W 2x2 only

T8/T5/T5HO Slotted Center Optic

Diffuse Center Optic

Specifications

CONSTRUCTION: Fixture assembly constructed using die-formed 20-gauge cold-rolled steel housing and ends. All components are hard-tooled to tolerances of 0.010". Ballast compartment is accessed from below. Optical system retained using hinged door frame assembly to provide easy access to ballast compartment and for re-lamping from below without the need of tools. Seismic brackets are integrated into the fixture assembly. Additional wire entrances are positioned on the ends of the housing to allow easy wiring access for the installer. FINISHES: Housing and door assembly painted with 96 LG high reflectance matte white powder coat paint. Available in matte white only. REFLECTORS: Die-formed 20-gauge cold-rolled steel reflectors are finished in 96 LG high reflectance matte white powder coat paint.

Round Center Optic

ELECTRICAL: Fixtures and electrical components are ETL listed conforming to UL1598 in the USA, and Canada and ETL listed certified to CAN/CSA C22.2 No. 250.0. In accordance with NEC code 410.73 (G) this luminaire contains an internal ballast disconnect. IC-Rated for all lamping except 3 T5HO. Optional Chicago Plenum available. vContact factory. LIGHT ENGINE: Available in 1, 2, or 3 T8, T5, or T5HO lamp cross sections. MOUNTING: Standard flange design works with most lay-in ceiling types. Integral pryout tabs secure luminaire to ceiling grid from above. Fixture offers tiein locations for tie-wire on all corners. Consult local code for appropriate tie-wire recommendations. Drywall Kit available. Surface mount version available; refer to separate tech sheet.

OPTICAL SYSTEM: Optical system components include side lens panels and a center optic element held in place with a frame constructed from die-formed cold-rolled steel. The side lenses are UV-stabilized and impact-resistant frosted virgin acrylic, 0.080” thick. Available parallel to the ceiling plane. Available options for the center optic elements: Diffuse Center Optic, Slotted Center Optic, and Round Center Optic.

HPR-A: 1 T8-DCO (2x4)

HPR-A: 2 T5-DCO (2x4)

Efficiency: 87.6% Peak Candela Value: 990@ 0° LSI Report: 25411

HPR-A: 2 T8-DCO (2x4)

Efficiency: 86.9% Peak Candela Value: 1548@ 0° LSI Report: 25441

275 550

900

CANDLEPOWER SUMMARY 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90

22.5 990 988 976 953 922 880 827 764 693 615 533 449 365 284 208 137 75 26 0

45 67.5 990 990 987 985 974 971 951 948 917 913 874 869 821 816 758 756 687 692 614 623 535 548 453 467 370 380 288 293 207 210 134 135 71 70 23 20 0 0

90 990 979 966 943 908 864 812 754 693 627 554 473 386 298 213 135 69 20 0

950 1425

CANDLEPOWER SUMMARY Flux 95 267 401 474 476 408 286 145 31

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90

0.0 1548 1545 1522 1485 1434 1367 1288 1195 1093 983 864 740 615 491 369 254 150 61 0

Refer to the Finelite website for additional photometry and product information.

226

475

1350

825

0.0 990 988 975 953 922 880 828 765 695 617 535 451 367 287 210 139 77 29 0

Efficiency: 84.8% Peak Candela Value: 1733@ 20° LSI Report: 25417

450

WWW.FINELITE.COM

22.5 1548 1544 1525 1492 1446 1387 1314 1227 1130 1022 904 778 646 513 383 262 150 58 0

45 1548 1545 1531 1505 1468 1420 1362 1292 1208 1107 987 852 708 558 409 272 152 52 0

67.5 1548 1546 1536 1517 1488 1454 1410 1352 1276 1177 1053 907 746 581 422 276 148 44 0

90 1548 1537 1531 1515 1492 1462 1424 1372 1300 1201 1074 923 757 589 426 276 145 43 0

CANDLEPOWER SUMMARY Flux 149 424 653 805 845 750 542 286 65

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90

0.0 1687 1689 1672 1640 1595 1533 1454 1357 1244 1117 979 832 683 538 398 267 151 58 0

22.5 1687 1693 1682 1659 1623 1570 1499 1408 1297 1167 1023 868 710 555 408 271 150 56 0

45 1687 1697 1700 1694 1677 1644 1586 1502 1392 1256 1099 930 757 586 422 274 148 51 0

67.5 1687 1699 1713 1725 1723 1702 1650 1566 1451 1306 1140 960 773 592 421 268 140 44 0

90 1687 1688 1710 1729 1733 1715 1666 1581 1465 1318 1148 963 773 591 419 266 138 43 0

Flux 164 477 752 927 950 815 569 288 64

HPR 1x2 HPR 1x4

Feature Spotlight

100% Serviceable from Below

Door Designs

Light Engine 4”

HPR-F (Flat)

HPR-A (Angled)

12”

FT40/50/55W 1x2 only

Shielding Options

T8/T5/T5HO

Slotted Center Optic

Diffuse Center Optic

Specifications

CONSTRUCTION: Fixture assembly constructed using die-formed 20-gauge cold-rolled steel housing and ends. All components are hard-tooled to tolerances of 0.010". Ballast compartment is accessed from below. Optical system retained using hinged door frame assembly to provide easy access to ballast compartment and for re-lamping from below without the need of tools. Seismic brackets are integrated into the fixture assembly. Additional wire entrances are positioned on the ends of the housing to allow easy wiring access for the installer. FINISHES: Housing and door assembly painted with 96 LG high reflectance matte white powder coat paint. Available in matte white only. REFLECTORS: Die-formed 20-gauge cold-rolled steel reflectors are finished in 96 LG high reflectance matte white powder coat paint.

Round Center Optic

ELECTRICAL: Fixtures and electrical components are ETL listed conforming to UL1598 in the USA and Canada, and ETL listed certified to CAN/CSA C22.2 No. 250.0. In accordance with NEC code 410.73 (G) this luminaire contains an internal ballast disconnect. Optional low profile battery pack available for 1x4. Battery pack delivers 1500 lumens. Minimum luminaire length for battery pack: 8’. LIGHT ENGINE: Available in 1, 2, or 3 T8, T5, or T5HO lamp cross sections. MOUNTING: Standard flange design works with most lay-in ceiling types. Integral pryout tabs secure luminaire to ceiling grid from above. Fixture offers tie-in locations for tie-wire on all corners. Consult local code for appropriate tie-wire recommendations. Drywall Kit available. Surface mount version available; refer to separate tech sheet.

OPTICAL SYSTEM: Optical system components include side lens panels and a center optic element held in place with a frame constructed from dieformed cold-rolled steel. The side lenses are UV-stabilized and impact-resistant frosted virgin acrylic, 0.080” thick. Available parallel to the ceiling plane. Available options for the center optic elements: Diffuse Center Optic, Slotted Center Optic, and Round Center Optic.

HPR-F: 1 T8-DCO (1x4)

HPR-F: 1 T8-DCO (1x2)

250

Efficiency: 78.0% LSI Report: 25829

125

Efficiency: 77.2% LSI Report: 25834v

500

250

750

375

CANDLEPOWER SUMMARY 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90

0.0 882 883 871 852 825 788 744 690 628 559 484 406 328 253 184 122 69 26 0

22.5 882 879 866 844 814 775 729 675 616 551 479 404 328 253 184 122 69 25 0

45 67.5 882 882 878 876 861 855 833 825 798 790 761 760 719 732 676 699 628 655 570 591 498 509 417 417 334 325 235 240 179 166 116 105 62 54 18 16 0 0

90 882 872 850 819 786 761 738 708 662 593 506 410 316 231 159 99 50 16 0

CANDLEPOWER SUMMARY Flux 84 235 353 429 439 367 245 121 26

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90

0.0 417 418 412 402 388 370 347 320 289 255 219 181 145 111 80 52 28 10 0

22.5 417 417 409 398 381 361 337 310 280 248 214 179 144 110 79 52 28 9 0

45 67.5 417 417 413 410 404 400 389 384 371 366 351 350 330 335 308 319 285 298 256 268 223 230 186 188 148 145 111 106 78 73 49 45 25 21 6 6 0 0

90 417 410 398 383 365 352 340 326 304 272 232 187 143 104 71 43 20 6 0

Flux 40 110 164 197 199 164 108 52 10

Refer to the Finelite website for additional photometry and product information.

WWW.FINELITE.COM

227

Project: Ariba Location: Sunnyvale, CA Architect: Whitney Polcyn Architects Product: High Performance Recessed (HPR) 2x4 Representative: Associated Lighting Representatives

228

WWW.FINELITE.COM

High Performance Recessed (HPR)

Project: Ariba Location: Sunnyvale, CA Architect: Whitney Polcyn Architects Product: High Performance Recessed (HPR) 2x4 Representative: Associated Lighting Representatives

Ordering Guide HPR - F - 2x4 - DCO - 1T8 - 277 - SC - C1 - IS.88 - OBO Finelite Series HPR Luminaire Styles (A - Angled, F - Flat, ANR - Angled Narrow Rail) Size (2x4, 2x2, 1x4, 1x2, 1x1) Center Optic (DCO - Diffuse, SCO - Slotted, RCO - Round, CSO - Curve Slotted) Light Engine (1, 2 or 3 T8, T5 or T5HO) Voltage (120, 277, 347V) Circuiting (SC - Single Circuit, DC - Dual Circuit, SD - Step Dimming) Mounting (C1 - 1" T-Bar, C2 - 9/16" T-Bar, C3 - Screw Slot, DW - Drywall Kit, SM - Surface Mount) Ballast (IS - Instant Start, PS - Program Start, BL - Bi-level, DI - Dimming, and specify BF*) Integrated Sensors (OBD - Daylight, OBO - Occupancy, OBB - Both) * Standard 0.88 for T8 lamps, 1.0 for T5 or T5HO. Contact factory for available BF’s Contact factory for Master/Satellite and factory-supplied whip options.

WWW.FINELITE.COM

229

HPW

Feature Spotlight Lens Options

Light Engine Frosted Ceiling System Information T8

Open Quick Connect Harness

T5/T5HO

Specifications CONSTRUCTION: Fixture assembly constructed using die-formed, 20-gauge, cold-rolled steel housing and ends. Lens and lamps are easily removable from below ceiling without the need for tools. The ballast compartment is also accessible from below ceiling by removing the reflector cover. Seismic brackets are integrated into the fixture assembly. FINISHES: Housing assembly painted with Signal White powder coat finish. REFLECTORS: Reflector is die-formed 25-gauge Alanod 8516GP semi-specular aluminum with 94% high reflectance finish. SHIELDING OPTIONS: T8 luminaires are available with an optional clear or frosted lens. T5 and T5HO luminaires are standard with frosted lenses. All lenses are UV-stabilized and impact resistant virgin acrylic. Frosted lenses are 0.080” thick and clear lenses are 0.0625” thick. ELECTRICAL: Luminaires and electrical components are ETL certified to UL and C-UL standards. In accordance with NEC code 410.73 (G) this luminaire contains an internal ballast disconnect. IC-Rated for all lamping. Optional Chicago Plenum available. Contact factory.

4" 3/ 4

5 " 8"

700

HPW-1: 1 T8 Fully Open (FO)

1050

Efficiency: 89.2% Peak Candela Value: 1685 @ 30° LSI Report: 25849

1750

1400

CANDLEPOWER SUMMARY 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90

0.0 852 841 831 812 785 750 706 653 594 531 462 391 319 248 178 113 57 18 0

67.5 852 935 1009 1073 1128 1174 1210 1218 1190 1131 1057 956 823 681 527 342 149 19 0

45 852 1000 1145 1292 1427 1498 1519 1516 1454 1356 1237 1096 918 692 451 220 49 11 0

22.5 852 1040 1239 1445 1573 1636 1659 1609 1534 1426 1297 1093 851 595 333 134 34 9 0

90 852 1054 1274 1491 1612 1682 1685 1628 1549 1436 1288 1063 810 546 302 95 29 8 0

Flux 50 176 318 427 471 430 291 111 12

Refer to the Finelite website for additional photometry and product information.

230

WWW.FINELITE.COM

BALLAST: UL listed class P electronic instant-start ballast