Fire-Dex Leather Fire Gloves OSHA Compliant Gloves Two-ply Nomex knitwrist Fully lined. Fire-Dex Honor Gloves

#255(p007-038)Turnout Gear 1/11/11 12:29 PM Page 7 OSHA Compliant Gloves Two-ply Nomex® knitwrist Fully lined Gunn cut/straight thumb design Made...
Author: Francine Ellis
0 downloads 0 Views 2MB Size
#255(p007-038)Turnout Gear

1/11/11

12:29 PM

Page 7

OSHA Compliant Gloves Two-ply Nomex® knitwrist Fully lined

Gunn cut/straight thumb design Made with double-chromed, tanned, heat-resistant leather Fully lock-stitched w/Kevlar® thread Elastic backside hugger for comfort Leather hanger loop for drying Full size leather pull tab Available in OSHA and NFPA compliant styles. Ship. wt. 1 lb.

NFPA Compliant Gloves Two-ply Nomex® knitwrist or gauntlet Crosstech® Direct Grip® liquid barrier Lining, liquid barrier and leather sewn at fingertips

TURNOUT GEAR

Fire-Dex ® Leather Fire Gloves

Specify size: S-XL X920 Fire-Dex® Gloves, OSHA Knitwrist BK203 Fire-Dex® Gloves, NFPA Knitwristr BK204 Fire-Dex® Gloves, NFPA Gauntlet

Fire-Dex ® Honor™ Gloves Maximum durability, dexterity Supple elk skin back provides and comfort unparalleled dexterity Durable, tough cow skin palm Crosstech® moisture barrier for lasting protection NFPA compliant Modacrylic® thermal liner Ship wt. 1 lb. Specify size: S-XXL BK205 Fire-Dex® Honor™ Gloves Wristlet BK206 Fire-Dex® Honor™ Gloves Gauntlet

NFPA compliant

Elk Skin Fire Fighter Gloves Gunn cut and gauntlet design with wing thumb and seamless index finger. Provides superior dexterity even after repeated periods of wetting and drying. Two-layer Kevlar® knit wristlet for unsurpassed protection without distortion and extra-long leather pull patch. Unique ”Glove-Bond” liner retention system securely attaches the SEF liner and the “Sentinel” vapor barrier to the glove shell. Meets NFPA, UL Classified FED-OSHA and CALOSHA requirements. Ship. wt. 1 lb.

Specify size: S-XXL AK026 Fire Fighter Gloves, Gunn Knit Wrist AK027 Fire Fighter Gloves, Gauntlet

Fireman I Gloves Its supple, all-leather, lightweight construction provides the basic fire protection you need. Offers a roomy Gunn cut design with a wing thumb, seamless index finger for extra durability, full sock-type liner of comfortable flame resistant SEF material, and a 2" leather cuff. Glove Meets FED, CAL-OSHA specifications. Does Not Meet NFPA standards. Ship. wt. 1 lb.

Specify size: XS-XXL AB421 Fireman I Gloves

Fireman VIII Gloves All leather Gunn cut glove with wing thumb Seamless index finger design enhances dexterity and durability Two-layer Kevlar® knit wristlet for unsurpassed protection without distortion

Specify size: XS-XXL AB422 Fireman VIII Gloves

Extra-long leather pull patch Unique “Glove-Bond” liner retention system securely attaches the SEF liner and the “Sentinel” vapor barrier to the glove shell Meets NFPA, UL Classified, FED-OSHA & CAL OSHA Ship wt. 1 lb.

1.800.323.0244 | www.edarley.com/gloves

7

TURNOUT GEAR

#255(p007-038)Turnout Gear

1/11/11

12:29 PM

Page 8

Elk/Pig NFPA Gloves Split elk hide and Shelby abrasionresistant brushed pigskin Gore™ RT7100 glove barrier fabric NFPA & CE compliant

Heavy-weight Fire retardant Shelby “Black Line” Nomex® wristlet

Specify size: S-XL, Jumbo Elk/Pig NFPA Wristlet Gloves Elk/Pig NFPA Gauntlet Gloves

BD144 BD145

Darley Gold Gloves Now with Gore Protection Offers unmatched comfort, protection and performance in an NFPA fire glove Gore RT7100 waterproof, breathable barrier system is the same proven technology used by many of the leading turnout gear manufacturers Every liner is sewn, seam sealed and 100% dunk tested Best in class technology means better dexterity, no liner pull-outs and performance even after exposures in hot structural environments Heavy weight Koala tanned outershell will remain soft after repeated soakings Made in USA

Specify size: S-XL, Jumbo BH127 Darley Gold Gauntlet Gloves

Pigskin Firewall ® Gloves Wash & Wear Pigskin Firewall® Gloves last four times longer than others. Wash & Wear Pigskin outer shell stays soft and supple even after repeated soakings. Gloves come with a sewn-in, breathable, liquid-proof barrier for bacteria and chemicals. This glove meets the highest requirements in terms of durability and abrasion resistance. AC542 and BA003 meet NFPA 1971, 2001 Edition. Made in USA. Ship. wt. 1 lb. Nomex® knitwrist Vapor barrier (NFPA only) Gunn cut seamless palm

Thermal lining OSHA and NFPA styles available

Specify size: S-XL AC542 Pigskin Firewall® Gloves, NFPA Wristlet BA003 Pigskin Firewall® Gloves, NFPA Gauntlet AC543 Pigskin Firewall® Gloves, OSHA Wristlet

Koala Gloves Shelby® Koala tanned, split cowhide Gore™ glove barrier fabric Fire retardant Wing thumb

Nomex® wristlet Breathable barrier Sewn in liner/barrier systems NFPA/CE compliant Ship. wt. 1 lb.

Specify size: S-XL AW122 Koala Gloves Knitwrist BA002 Koala Gloves Gauntlet

FIREWALL® ARFF Gloves Crosstech® Direct Grip® glove liner Aluminized PBI®/Kevlar™ knit 2-Ply Nomex® wristlet

Breathable NFPA 1976-2000 compliant

Specify size: M-XL AW114 Firewall® ARFF Gloves

8

1.800.323.0244 | www.edarley.com/gloves

#255(p007-038)Turnout Gear

1/11/11

12:30 PM

Page 9

Leather construction

Nomex® knitwrist

TURNOUT GEAR

Darley Firefighter Gloves Our firefighter gloves are designed with a liner/moisture barrier system that delivers protection without sacrificing dexterity. Ample glove cut provides a larger area of protection and better fit. Ship. wt. 1 lb.

Shop online for more gloves 24/7 at edarley.com/gloves

Leather pull tab

Specify size S-XXL AF785 Darley Firefighter Gloves

Eclipse Elk Skin Gloves Superior overall fit Swing Thumb™ style provides anatomically correct thumb to finger action & innovative wrap around index finger to provide excellent dexterity Unique convertible cuff can be worn as knitwrist or gauntlet style Reduced hand fatigue and improved grip

NFPA compliant

1" longer than others Leather retaining band acts as 360° pull tab to prevent tearing of knitwrist SEF® Modacrylic® lining and moisture barrier Meets NFPA, OSHA and CAL-OSHA standards. Ship. wt. 2 lbs.

Specify size: S-XXL AM060 Eclipse Elkskin Gloves

Blaze Fighter Gloves Blaze Fighter is a U.S. made, advanced design fire fighting glove that offers flexibility, tactility, and comfort without compromising your protection. Our new Glove Bond process locks the inner layer to the outershell for improved dexterity. True 3-D design Kevlar® goat skin back Excellent heat protection Outstanding wear protection

Curved true fit finger design Remains soft after washing NFPA certified Made in the U.S.A.

Specify size: S-XXL BG173

Blaze Fighter Glove

Super Gloves A New Era in Fire Fighting Hand Protection True 3-D hand-shaped styling with staggered layer seaming Bubble-Flex and Flex-Tuck construction with dead air spacer ridges allow natural hand flexing Eversoft black cowhide cuffs Top grain kangaroo leather on back for easy flexing and durability Digiroo™ digital kangaroo grip on palm and fingers High-temperature, stable and durable Crosstech® moisture barrier Wool 3-D heat guard on the back of hand delivers extra insulation at this often thermally-loaded area 3-D Air Assist™ thermal lining architecture that preserves microcapsules of air for thermal protection without traditional bulk NFPA 1971, 2007 edition certified

Specify size: S-XXL BG123 Gauntlet Super Gloves BG124 Wristlet Super Gloves

1.800.323.0244 | www.edarley.com/gloves

9

#255(p007-038)Turnout Gear

1/11/11

12:31 PM

Page 10

TURNOUT GEAR

14" Black Hornet Structural Bunker Boot Upper: Black Boulder waterProof, flame, and cut-resisting leather, Vibram® rubber toe and heel protection, flame-resisting ADVANCE™ shaft, with “Shark-Skin Covered Shin Guard” Construction: Goodyear Storm Welt Lining: Comfort Weave / Sympatex® waterproof barrier, blood borne pathogen compliant Insole: Polyurethane removable footbed on flexible non-woven double insole Midsole: Rubber Shank: Steel triple ladder shank Outsole: Exclusive Vibram® fire sole with chiseled edge lugs Special Features: Kevlar® Stitching. flexible L-Protection™ puncture-resisting insole material. ASTM F-2413-05 M/I/75/C/75 oblique steel toe. Tested for and meets CAN/CSA-Z195 Electric Shock Resistance. Electrical hazard. 3M™ Scotchlite™ reflective material - high visibility piping. Made in USA by ISO 9001 Certified Shoe Company.

Specify size: 5-14, 15, 16 Specify width: M, Wide, XW BH116 14” Black Hornet Structural Bunker Boot

Pull-Up Structural Leather Fire Boots You can depend on the quality and comfort of Thorogood boots - since 1892. All Thorogood structural firefighting boots meet the requirements of NFPA 1971-2000 and are constructed with the features you demand, like long-lasting Vibram® soles and Sympatex® waterproof barriers for blood borne pathogen protection. Other safety features include waterproof, flame and cut resistant leather, electric shock resisting stainless steel plate and thermal barrier. Meets NFPA & ANSI; UL Certified. Ship. wt. 6 lbs. Made in the USA Safety toe Blood borne pathogen resistant NFPA - structural firefighting Waterproof Vibram® fire sole

More boots in Wildland (p39-49) Rescue Tools (p77-126)

Medium, Wide and Extra Wide Whole and Half Sizes: 5-13, 14, 15

Specify width and size AM147 14" Pull-Up Structural Leather Fire Boots

Wide Toe Bunker Boots Black boulder, waterproof, full-grain, fire-resistant leather upper Goodyear welt construction Vibram® heat, abrasion, cut resisting Kevlar® Rubber outsole Polyurethane insole with removable insert Superknit lining Rubber midsole Fiberglass shank Built-in shin guard Sympatex® Waterproof Blood borne pathogen resisting membrane ANSI 175/C75 steel toe EH Roomier wide toe design Steel triple ladder shank

Specify width: M,W and XW Specify size: 5-13, 14, 15 AW019 Wide Toe Bunker Boots

10

1.800.323.0244 | www.edarley.com/boots

#255(p007-038)Turnout Gear

1/11/11

12:31 PM

Page 11

TURNOUT GEAR

Pro Warrington 5006 Boots Fully visible reflective Goodyear 14" leather/Advance™ rip stop w/sloped back PowerWelt™ Streamlined design Shin guard Goodyear welt construction Oblique steel toe Patented PowerToe™ Stainless steel one-piece Patented reflective PowerHeel™ protective bottom plate Patented 3" PowerBack™ Triple-ridge steel ladder shank 7 oz. Advance™ outer shell Barcoded for easy tracking Full-grain military AB leather 119 sizes available 7.5 oz. Kevlar® thermal & puncture barrier Berry Amendment Compliant Crosstech® moisture barrier Union made in USA PRO-V lining Sturdy, lined pull-on straps Patented Reflective Removable orthopedically designed insert PowerHeel™ Thermoplastic heel counter Vibram® Fire and Ice lug sole

Specify width: D, E, EEE Specify size: 5-12, 13, 14 BG301 Pro Warrington 5006 Boots

Black Diamond X2-Boots Calf-Fit System™: Exclusive calf-fit system™ allows for maximum comfort and fit Leather Upper: Fire retardant, genuine heavyweight FireTuff™ leather Pull-On Lining: CROSSTECH® fabric with Omaha lining is a high performance, System wicking fabric, originally developed for aggressive military applications Lining Construction: Stitch-down “Stroble” lining ensures no liner pull-out and maximum fit 3-Point Heel Lock System: Exclusive for fit and comfort 3M Scotchlite™ Reflective Material: Flame-resistant fluorescent and reflective material for added visibility 3-Point Heel Toe Cap Protection: Rubber toe cap for high-abrasion and steel toe Lock System HI 500 Oblique Comfort Toe meets or exceeds ASTM standard Footbed: Tri-density, multi-fit, removable comfort footbed with TPU arch support, anti-microbial, breathable and shock absorption Certification: NFPA 1971 for Structural Firefighting and NFPA 1992 for Liquid Splash

Shin-Guard Protector

Specify size: 7, 8-11, 12, 13, 14 BK274 Black Diamond X2-Boots

Hellfire Ulti-met™ Structural Bunker Boots The Ultimate in Footwear Comfort & Protection ASTM F 2413-05 M/I/C/75 EH PR Meets NFPA Requirements Made in USA by ISO 9001 Certified Shoe Company

Flame-resisting ADVANCE™ shaft

Toe Cap Protection

Cushion shin guard

Flexible lightweight I-MET® Metatarsal protection for T.R.I.

Black Boulder WATERPROOF, flame, and cut-resisting leather vamp Heat and abrasion-resisting rubber heel bumper

Tempered steel safety toe

Steel triple-ladder shank for superior arch support Thorogood exclusive Vibram® FIRE sole with lifetime warranty Specify width: M, W, XW Specify size: 7-12, 13, 14 BD196 Hellfire Ulti-met™ Structural Bunker Boots

Flexible L-Protection™ puncture-resisting insole material by Lenzitecnoline

1.800.323.0244 | www.edarley.com/boots

11

TURNOUT GEAR

#255(p007-038)Turnout Gear

1/11/11

12:36 PM

Page 12

Hellfire™ Insulated Boots Hellfire series provides superior protection for structural fire fighting. Ship. wt. 6 lbs. Unique one-piece liner construction - Utilizes Dupont’s™ premier Kevlar® knit fabric. The one piece liner eliminates overlapping seams that trap moisture and channel burning steam. Oversized steel toe cap - Allows generous layers of insulating materials to fit inside the toe cap to reduce conductive heat. Strategic placement of steel midsole blocks heat as well as punctures Separation from the foot via midsole insulation reduces temperature penetration. Cushion shin guard with rug-gripping texture - Dual-purpose design is textured for stability and cushioned for comfort. High-temperature resisting reflective patches - Vulcanized patches retain full brightness and reflectivity over time, even at high temperatures. Polyurethane removable insole - Provides athletic shoe comfort and additional thermal protection.

BB009

Specify width: M, W, XW Specify size: 7-14, 15 BB009 Felt Lined Hellfire™ White Lug Sole AZ248 Light Insulated Hellfire™ Calendared Sole AZ250 Insulated Hellfire™ Lug Sole

HazMat/Structural Boots Weight and Fit Equal to that of Leather Bunker Boots Multiple layers of flame-suppressing materials - Protects and insulates the wearer. Multi-layer/diverse types of rubber - Each layer protects with different chemical resisting properties with improved electrical hazard protection. Technologically advanced polyurethane/rubber lug sole - Super abrasion and slip resisting, improved traction in all weather conditions. Oversize steel cap and insulated midsole - Superior foot comfort High-temperature resisting reflective patches - Vulcanized patches preserve full brightness and reflectivity over time. Lightweight cushioned design - More comfort, less fatigue. Unique, durable “Flat Tacked” pull straps - Designed not to rub against the calf.

AZ248 sole

AZ250 sole

Specify width: M, W, XW Specify size: 5-15 BC011 HazMat/Structural Boots

Aluminized Rubber Boots

BC011

ARFF boots reflect radiant heat, keep feet safer, cooler, and more comfortable. Increased protection in proximity fire and rescue. Ship. wt. 25 lbs. Nomex® Linings create durable heat and penetration barriers inside this rugged, reinforced fireboot Night Sight ultra-high reflection safety stripes from 3M® shine in low light conditions. Extra layers in heel and toe increase durability, support and protection Vibram® Lug Outsoles provide a stable base for balance and traction Flex Shield stainless steel midsole meets NFPA, ANSI, OSHA, CAL-OSHA, and CSA standards for sole puncture resistance Safe-Toe® steel toe cap Kevlar®/Nomex® lining

Specify width: N, M, W Specify size: 7-16 AR313 Aluminized Rubber Boots

12

1.800.323.0244 | www.edarley.com/boots

AR313

#255(p007-038)Turnout Gear

1/11/11

12:36 PM

Page 13

TURNOUT GEAR

FireBreaker Fighting-Weight™ Boots Tremendous physical exertion in extremely dangerous conditions is one of the reasons a firefighter's job is so unconventional. Add to that situation the impact of carrying up to 100 extra pounds of protective gear and equipment and it's easy to understand how fatigue can quickly impact safety and performance. Fatigue reduction is exactly why we designed the Firebreaker Fighting Weight™ to be up to 25% lighter than heavier, conventional fireboots. Made with an exclusive Unishield™ process, a pair of Fighting-Weights™ still provides all the protection of the original Firebreaker, yet is lightweight enough so that the difference can truly be felt. Independent clinical studies reveal that reducing a pound of weight on the foot has the same stress-relieving benefit as taking five pounds off a firefighter's back. That means Fighting-Weight™ boots' lighter weight can translate to an eight-pound reduction off a firefighter's load when compared with the heaviest boots of other manufacturers. NFPA 1971 (2000 Edition) Compliant. Ship. wt. 7 lbs. Unishield™ innovative latex rubber dipping process eliminates seams, produces lighter-weight boots High abrasion-resistant outsole and heel Patented built-in shin guard FootGuard Protection System™ AccuFit Sizing™ uses widely accepted Brannock device sizing Heavy insulation

AJ540

Shop online for more boots at edarley.com/boots Specify width and size AJ540 Men’s FireBreaker Fighting-Weight™ Trac Tread Outsole AJ542 Men’s FireBreaker Fighting-Weight™ Lug Outsole AJ543 Women’s Firebreaker Fighting-Weight™ Lug Outsole

Stormking Firefighter Boots 31" high. Available insulated or non-insulated. ANSI - American National Standard Z41-1999 OSHA - Occupational Safety/Health Admin. 1988 Code of Federal Registry 1910.36,1910.156 and Appendix E. CAL-OSHA - Calif. Admin code Title 8 GISO Article 10.1 Sept 1985. CSA - Canadian Standards Assoc. Master Contract #205043. Ship. wt. 9 lbs.

AJ542

Height - 31" Vulcanized, layered rubber Upper - Rubber formulation is fire-resistant, resists cracking and oxidation Lining - 20 oz. grey felt Outsole - White high-abrasion Outsole pattern - White Sure Loc™ outsole Heel - Black molded rubber Heel reinforcement - Cotton/nylon blend Insole - 3/8" cushion sponge Steel toe - Meets ANSI Z41 1999 - Section 1 Impact & Compression Steel midsole - One piece stainless steel Steel shank - .05" x 1" x 4" triple ribbed Non-NFPA compliant Wide sizes only Whole sizes: 5-15

Specify whole sizes only J748 Stormking Firefighter Boots, Enhanced Insulation

J748

1.800.323.0244 | www.edarley.com/boots

13

TURNOUT GEAR

#255(p007-038)Turnout Gear

1/11/11

12:37 PM

Page 14

Firefighter Boots These proven performers offer superior quality at a value-focused price, so the issue of safety and protection will never be an issue of cost. Meets NFPA 1971, ANSI Z41.1 1999 standards. Complies with ANSI Z41-1999 for Personal Protective Footwear, specifically: Z41.1 impact and Compression of Steel Soles, Z41.4 Electrical Hazard Protection (Dielectric) and Z41.5 Sole Puncture Resistance. Ship. wt. 9 lbs. Superior quality at an affordable price Extra-heavy outside toe cap reinforcement Thick cork cushion insoles Easy on and off, sturdy pull-on straps Ozone-resistant compounds used throughout Steel toe exceeds ANSI Z41.1 1999 standards Flexible steel midsole and steel shank for superior protection Sure-footed cleat-grip sole pattern Narrow, Medium or Wide Whole and Half Sizes: 5-16

Specify width and size AF109 Firefighter Boots, Insulated AF110 Firefighter Boots, Non-Insulated

FireWalker Traditional Fireboots When you need comfort and protection, this boot meets the challenge with a traditional boot fit. You’ll get a fire-grade rubber boot formulated for high-heat stability, water tightness and resistance to contaminant deterioration. Inside is an extra-dense lining of heavy-duty wool felt plus a polyfoam insulation covering the entire foot and shaft. FireWalker offers great protection with Safe-Toe® built-in steel toe cap, bumper guards, tempered steel shanks and stainless steel midsoles. Durable Sure Loc™ outsoles provide protection and stability. 16" boot height. Exceeds NFPA standards; meets all ANSI, OSHA & CAL-OSHA standards. Ship. wt. 8 lbs.

Wool felt midsole Wool felt lining Extra heel reinforcement White Sure-Loc™ outsole

Specify width and size H223 FireWalker Fireboots, Insulated J601 FireWalker Fireboots, Non-Insulated

DryGuy™ Drying Systems Sweet 16™ Boot and Glove Dryer Have you ever faced the daunting prospect of putting warm feet into cold, wet footwear? Dryguy™ is the country’s leading supplier of footwear and accessory dryers to the outdoor and ski markets. These proven products are now available for the fire service professional. Both models feature a whisper-quiet rotary blower that provides a blast of heated or unheated air for fast drying. Approximate dry time for gloves or boots is 1-2 hours. 120 V AC, On/Off, three hour timer. You can count on DryGuy™ products to keep you warm and dry. What are you waiting for? Get out there!

Dries both gloves and boots up to 16"

BD142

14

1.800.323.0244 | www.edarley.com/boots

DryGuy™ Sweet 16™ Boot Dryer

#255(p007-038)Turnout Gear

1/11/11

12:45 PM

Page 15

8" convenient side zip Dual-density premium rubber insole Non-marking rubber, mini-lug outsole All-leather steel toe

Waterproof Side Zip Composite Safety Toe Boots 8" convenient side zip Dual density rubber outsole w/integrated EVA impact pads Non-marking rubber, mini-lug outsole Safety toe, blood borne pathogen resistant, waterproof and slip resistant

Specify Size and Width: (Uni-Sex) Mens: Medium and Wide 4 - 12, 13, 14 Womens: Medium and Wide 6 - 10, 11, 12 AZ478 Commando II Side Zip Boots w/Steel Toe

Specify Size and Width: (Uni-Sex) Mens: Medium and Wide 7 - 12, 13, 14 Womens: Medium and Wide 7 - 10, 11, 12 BB134 Waterproof Side Zip Boots

ATAC 6" Low Boots

ATAC Shield Comp Toe Boots

Polishable leather toe Full grain leather and nylon upper Antibacterial and moisture-wicking lining Shock Mitigation System® Oil and slip resistant, quiet outsole

High Performance waterproof-breathable Blood-borne pathogen resistant ASTMF 2413.05 composite safety toe Full-grain leather upper, 8” height Hidden pocket and side zip Antibacterial and moisture-wicking Shock Mitigation System® Oil and slip resistant, quiet outsole

Specify size: 7-12, 13, 14, 15 Wide: 7-12, 13 Specify width: Regular or Wide BK146 ATAC 6" Low Boots

Specify size: 7-12, 13, 14, 15 Wide: 7-12, 13 Specify width: Regular or Wide BK147 ATAC Shield Comp Toe boots

TURNOUT GEAR

Commando II “Deuce” Boots

Level One Socks Quite possibly the most comfortable socks you’ll ever wear. 12 engineered zones for maximum comfort, fit and support. Durable, comfortable and functional Moisture-wicking Coolmax® fibers Multiple zones of compression Superior fit Extra padding in soles of feet 80% Coolmax®, 8% nylon, 8% spandex, 4% rubber

Color: Black BK191 Level One 6" Socks BK192 Level One 9" Socks

1.800.323.0244 | www.edarley.com/boots

15

TURNOUT GEAR

#255(p007-038)Turnout Gear

1/11/11

12:51 PM

Page 16

Escape Belts

Nylon Life Belts Made For Maximum Safety, Durability, Versatility and Comfort

Made with nylon especially woven to meet rigorous strength, texture and durability requirements. Webbing has a minimum breaking strength of 9,000 pounds. Assembled belt will withstand 2,000 pounds. The 3" wide buckle strap, sewn with high-tenacity nylon thread and riveted with copper rivets to the 5" wide body strap, is fitted with a double tongue buckle, which enables fast engagement and release of belt. Ship. wt. 5 lbs. Specify belt size J922 Life Belt with Pompier Hook only J923 Life Belt with Pompier Hook, Crash Axe Sheath

Ladder Hook Extension Ladder Hook Extension allows the rescuer to attach themselves to a ladder rung or tower platform. Overall length of 18" provides the perfect length to give the rescuer both comfort and safety. NFPA requirements mandate a maximum overall length of 18". Easy-to-operate double locking snap hooks are located at each end of the strap. The XL hook on one end will open to 2.5" to accommodate any ladder rung. The small end of the Ladder Hook Extension attaches to the D-ring constructed of Kevlar® webbing. Available with steel or aluminum alloy hooks. Strength: 5000 lbs. Ship wt. 2 lbs.

First Kevlar® fire Escape Belt certified to NFPA Class I personal escape harness standards. Waist belt of harness utilizes quick connect “Double Locking” snap hook and D- ring adjuster system. Forged D-ring used for main attachment point has a minimum breaking strength of 5000 lbs., epoxy coated red. Truck/escape belt is constructed of 9000 lb. Dupont Kevlar® webbing. Kevlar® webbing is coated with a special process to reduce wear and abrasion. Belt is constructed with two layers of webbing to increase stiffness while carrying tools. Contrasting color Kevlar® thread is used to aid in visual inspection. Pad under waist buckle made of black Nomex® material. Belt comes with two additional light weight D-rings that can be adjusted on the rear of the belt to affix a Personal Escape Rope Pack. NFPA (1983/2001 Edition) Certified. Ship wt. 2 lbs. AZ102 Escape belt nylon holster can be used for carrying fire axe or halligan tool.

Specify size: L - 34-54, XL - 44-68 AZ100 NFPA Kevlar® Escape Belt AZ101 Nylon Escape Belt AZ102 Fire Tool Holster for Escape Belt

Pac Mule Ultra Ladder Belt The Ultimate Hands-Free Truckman’s Belt Designed by Firefighters X-Large Shown

AZ103 Ladder Hook Extension (Kevlar®) w/Steel Hooks AZ104 Ladder Hook Extension (Kevlar®) w/Alum. Hooks

Leather Truckman's Belt The traditional firefighter’s Truckman’s belt now has an improved design; use it for just about anything. Constructed of top-grain leather, measures 11/2" wide and is fully adjustable. Includes heavyduty snap hook and 2 heavy-duty rings. Folds are riveted as well as stitched for durability. All hardware is chrome plated brass. Optional equipment hook and ring are easily added with secure screw rivets. Ship. wt. 3 lbs.

Ring Hook H992 AR308 AR309

16

Leather Truckman's Belt Equipment Hook Equipment Ring

1.800.323.0244 | www.edarley.com/turnout

BK122 These lightweight belts provide 4" of Coolmax back padding for wraparound support and keep SCBA from hitting your spine. Carry tools and equipment in any situation without slipping or tangling. D-rings Velcro® up and out of the way when not being used. Belt is made from 3M Scotchlite, flame-resistant, highly reflective material. Adjusts easily to fit over your turnout gear. Features rear carabiner slots, a carabiner and an 18" lanyard. BK122 has the same features as AZ241 with added capabilities of making a ladder belt into a Class II harness by attaching the leg straps. Exceeds NFPA for escape belts. Color coded by size for quick identification. Ship. wt. 2 lbs.

Specify Waist Size Medium, Black: 28"-33" Large, Blue: 34"-40" AZ241 BK122

X-Large, Yellow: 42"-50" XX-Large, Red: 52" & up

Ultra Ladder Belt Ultra Ladder Belt with Harness

#255(p007-038)Turnout Gear

1/11/11

1:02 PM

Page 17

BH188

DRIFIRE® performance FR Wear provides optimum moisture management performance with an added level of protection against exposure to fire or flash flame. DRIFIRE’s performance technology is engineered into the yarn to allow moisture to seamlessly transfer outward through each layer. Dries 4x faster than cotton to keep you comfortable in any environment.

BH187

Flame Resistant - Flame Resistance is inherent to DRIFIRE® fabric. FR won’t wear out, breakdown, melt, drip or fuse to the skin if exposed to intense heat or flame. Moisture Management - Designed to wick moisture away from the skin, keeping the body cool and dry while reducing heat stress and exhaustion. Fast drying fabric helps prevent scalding by eliminating steam burns. Anti-Odor and Anti-Microbial - Anti-microbial protection prevents bacteria from forming. DRIFIRE® garments are designed with FreshGaurd® to eliminates odor and keep you smelling fresh. Comfort - Soft to the touch and color fastness will last through hundreds of washes.

Specify size: S-XXL Cat# Description BH187 Long Sleeve Medium Weight Shirt BH188 Short Sleeve Medium Weight Shirt BH189 Long Sleeve Fleece Pullover Job Shirt

TURNOUT GEAR

Performance FR Shirts

BH189

S-XL

XXL

Universal Radio Holder Three-part system (sold separately) mates comfortably with scissor snaps and D-Rings. The radio holder is universal to fit most radios and the anti-sway strap was designed to keep your radio on a tether and reach at all times. 11/4" wide and made of heavy duty leather. Speaker mic attaches to a leather loop for easy access Strap can be used on either shoulder Scissor snaps on both ends of the Anit-Sway strap allow for easy placement on your rig keeping your radio in reach at all times Designed to securely fits most radios Two elastic cords help secure the radio while the two D-Rings allow it to mate with the Radio Strap AW285 AW286 BH101

AW286

BH101

AW285

Universal Radio Holder Leather Radio Strap Anti-Sway Strap

Bunker Belt ® Transporting PPE Gear Made Easy!

BG507

The Bunker Belt® System is your bag without a bag. The Bunker Belt® enables fire fighters to easily assemble all their gear on the Bunker Belt®, including boots, bunker pants, coat, helmet, tool bag, face mask bag, gloves and any other items you want to attach. Assemble all your gear in less than 60 seconds and deploy your equipment for calls in less time. Made in the U.S.A. 2" heavy & super heavy weight webbing Red or black attachment strap with 4 carabiners Shoulder strap with rubber comfort pad Quick-release buckles for fast deployment Boot strap with custom slide and keeper for easy adjustment BG507 BG504

BG504 - Sold separately. Tools not included.

Bunker Belt® (Specify Attachment Strap Color: Black or Red) Pocket Tool Fold with Flap

BG507

1.800.323.0244 | www.edarley.com/turnout

17

#255(p007-038)Turnout Gear

1/11/11

1:03 PM

Page 18

TURNOUT GEAR

Professional Polo SS A longtime staple of the 5.11® product line, the Professional Polo is essential wear for a neat, clean and professional appearance. 6.8 oz. wrinkle, shrink and fade-resistant cotton No-roll collar Pencil pockets on the left sleeve Imported Also available for women, call for pricing

Specify color: Heather Grey or Dark Navy Specify size: S, M, L, XL, XXL, 3XL BK140 Professional Polo SS

S-XXL

3XL

S-XXL

3XL

Job Shirts 11.6 oz. poly cotton fleece Poly-cotton twill 5.11’s stain resistant finish Chest Breakthrough™ pocket with Velcro® divider Hand warmer pockets on both sides Mic pockets at both shoulders Pen pockets on left sleeve No-roll collar Locker loop

Specify size: S, M, L, XL, XXL, 3XL BK137 Job Shirt with Denim Details BK138 Job Shirt with Canvas Details 1 BK139 /4 Zip Job Shirt

18

1.800.323.0244 | www.edarley.com/turnout

#255(p007-038)Turnout Gear

1/11/11

1:04 PM

Page 19

BK150

BK149

Rugged, fade-resistant 100% cotton twill and functional innovation make the Station Pants an unbeatable value. Available in both men’s and women’s sizes and with or without cargo pockets. 8.25 oz. 100% cotton twill Self-adjusting tunnel waistband that moves with you Rear web strap 5.11 Double-Time™ belt loops YKK® zippers Prym® snaps

TURNOUT GEAR

Station Pants

Specify waist: 30", 32", 34", 36", 38", 40", 42", 44" Specify inseam: 30", 32", or 34" Color: Fire Navy BK149 Station Pants Specify waist: 30", 32", 34", 36", 38", 40", 42", 44" Specify inseam: 30", 32", or 34" Color: Fire Navy BK150 Station Cargo Pants

Tactical ® Pants 8.5-oz., 100% cotton canvas Great new women’s fit now available, call for pricing Superior durability, comfort and performance Trademarked rear strap and slash pockets Elastic action waist for fit and comfort Double thick seat and knees Genuine YKK® zippers, Prym® snaps Imported

ant! resist e d a F

EMS Pants Built of rugged, fade-resistant poly-cotton twill and loaded with user-driven features, the EMS pants have everything you’re looking for in an EMS pant. Imported. Free neoprene kneepads included w/purchase 7.25 oz poly-cotton twill is treated with Teflon® for stain, soil and liquid stain resistance Comfortable, self-adjusting tunnel waistband that moves with you Gusseted crotch allows freedom of movement and virtually eliminates seam failure Prym® snaps and YKK® zipper 5.11 Double-Time™ belt loops Full-size cargo pockets with internal dividers and external EMS-specific pockets Utility pockets at the calf

Belt loops

Specify waist: 30", 32", 34", 36", 38", 40", 42", 44" Specify inseam: 30", 32", or 34" Specify color: Fire Navy or Khaki BK151 Tactical® Pants

Specify waist: 30", 32", 34", 36", 38", 40", 42", 44" Specify inseam: 30", 32", or 34" Color: Dark Navy BK152 EMS Pants

1.800.323.0244 | www.edarley.com/turnout

19

TURNOUT GEAR

#255(p007-038)Turnout Gear

1/11/11

1:05 PM

Page 20

Responder Parka 3M™ reflective trim DuPont™ Active Layer lining with blood-borne pathogen resistance 5.11® Traxion non-slip shoulder Removable hood & fleece liner features four pockets RadioReady chest pocket Shell features 11 pockets Velcro® wrist closures and storm flaps Zippered armpit vents Stretch draw-cord waist Velcro® name tape holder Mic loops at shoulders and sternum Imported BK144: Meets ANSI Class 2, Level 2 / ISEA 107-2004 standards

BK145 BK144

Specify color BK144: Range Red, Royal Blue, Dark Navy Specify color BK145: Black, Royal Blue, Dark Navy S-XXL Specify size: S, M, L, XL, XXL, 3XL, 4XL BK144 Responder Hi-Vis Parka BK145 Responder Parka

3XL-4XL

Customize It At Darley! We have partnered with 5.11 Tactical ® to offer you superior products and embellishments at a value! Visit www.edarley.com/customshop for more information or contact your Darley representative today for quotes and pricing at 1.800.323.0244.

MALTESE5

MALTESE4

MALTESE3

MALTESE7

MALTESE1

EMS1

Now offering: Screen printing Embroidery Heat transfer Alterations on select 5.11 Tactical products 6 stock logos to choose from

20

1.800.323.0244 | www.edarley.com/turnout

#255(p007-038)Turnout Gear

1/11/11

1:18 PM

Page 21

TURNOUT GEAR

Lieutenant Duty Jacket We have heard the Lieutenant called the perfect EMS jacket because of its light weight and the ability to accommodate the zip-in insulating vest liner. Built from the ground up to utilize the latest in design and material technologies, your crew will notice the Lieutenant Duty Jacket. It will offer them warmth and breathability, free range of motion, and a good fit. The Lieutenant is one of our favorite jackets, proving that you do not have to compromise on good looks, comfort, durability, and performance. Polyester-spandex blend fabric has been designed to stretch with the wearer to provide better fit, more comfort, and free range of motion DWR (durable water repellent) finish retains a rating of 80 after 20 home washes Inside jacket fabric is brushed for softness Side seam vents are nylon tricot for high breathability and ventilation control 3M Scotchguard® reflective material All zippers are water resistant and bonded with Bemis® welding tape to reduce bulk Removable hood cleanly attaches to collar Right chest pocket and mic tabs are designed to accommodate radio

Specify size: S, M, L, XL, XXL, 3XL, 4XL Specify color: Black or Red Cat# Description BK080 Lieutenant Duty Jacket

S-XXL

3XL-4XL

Battalion Chief Duty Jacket Our Nine 1 One Gear™ Battalion Chief duty jacket is a revolutionary and stylish step forward in performance, comfort, and durability. Your crew will be working in our top-of-the-line jacket, engineered to withstand the extreme elements you face each day. The Battalion Chief high visibility jacket is ANSI class II compliant, a necessity for professionals working in the right-of-way. This is the duty jacket for professional emergency service providers. Ergonomic elongated back hem enhances protection from the elements Invisible hood tucks into body with no excess bulk Zipper guard reduces irritation to the face and body Zipper cord pulls allow for easy access to all pockets and closures Lining zipper for access to shell for patch placement Adjustable hem cords built into front pockets to reduce incidents of snagging Convenient small item sleeve pocket AirTex™ breathable outer shell waterproof to 7000mm AirTex™ P625 laminate high tech inside liner: – viral resistant and blood borne pathogen barrier – waterproof (ISO 811-exceeds 700cm hydrostatic head) Dupont Cordura® in high wear areas for added durability Ever-Quick® dry lining fabric for moisture control Bemis® seam seal taped for liquid tight integrity All zippers are water resistant and bonded with Bemis® welding tape to reduce bulk No-draft internal cuff promotes thermal retention 3M Scotchguard® reflective material meets Class II ANSI requirements

Specify size: S, M, L, XL, XXL, 3XL, 4XL Specify color: Red/Black, Black/Black, or High Vis Yellow/Black Cat# Description S-XXL BK078 Battalion Chief Duty Jacket

3XL-4XL

1.800.323.0244 | www.edarley.com/turnout

21

TURNOUT GEAR

#255(p007-038)Turnout Gear

1/11/11

1:18 PM

Page 22

Assault Gear Coat Features 32" length Two semi-bellows and hand warmer pockets Radio pocket and mic clip 3M Scotchlite™ trim Zipper with Velcro® outer closure Drag Rescue Device (DRD)

Turnout Sizing Coat Size Small

Pant Features Rear bib design for added protection Zipper with hook and loop closure Reinforced cuffs and knees Two bellows pockets FREE H Back Suspenders

32"

Medium 40"-42"

34"

Large

44"-46"

35"

XLarge

48"-50"

35"

2XLarge 52"-54"

36"

Ships in one week or less

Pants Size

Drag Rescue Device

Chest Sleeve 36"-38"

Small

Waist Inseam 30"-32"

29"

Medium 34"-36"

29"

Large

38"-40"

29"

XLarge

42"-44"

29"

2XLarge 46"-48"

29"

* Please see page 329 for a detailed sizing guide.

Nomex®

((* ((* !!!

((* ((* ((*

P84/Kevlar®

((* ((* *!!

((* ((* ((*

700

(*! !!!

1000 ((( (*!

Cost

Thermal Damage Tolerance

Cut Resistance

Degradation Temp °F

Abrasion Resistance

Tear-Trap Strength

Tensile Strength

Strength after TPP

TPP Factor

Fabric

Strength after UV

MATERIAL PERFORMANCE

$ $$

Basofil/Kevlar® (*! ((( (!! ((* ((* (*! 1000 ((( (*! $$$ PBI® Matrix®

((* (*! ((*

((* (*! (*!

1300 ((( ((( $$$$

Custom Name Panel Customize your gear with your choice of 2" (up to 12) or 3" (up to 8) letters.

Specify Material AS51901 Custom Name Panel AS51902 Letters

Nomex®/Kevlar® Assault Gear Shown

Specify coat and pant size Specify color: Yellow with red/orange solid trim or Black with yellow solid trim AR010 Nomex IIIA® Assault Gear Coat AR011 Nomex IIIA® Assault Gear Pants Specify coat and pant size Color: Khaki with lime/yellow silver triple trim BB004 Nomex®/Kevlar® Assault Gear Coat BB005 Nomex®/Kevlar® Assault Gear Pants Specify coat and pant size Specify color: Gold with lime/yellow silver triple trim or Black with red/orange triple trim AR012 P84 Assault Gear Coat AR013 P84 Assault Gear Pants Specify coat and pant size Specify color: Gold with lime/yellow solid trim or Black with red/orange solid trim AR014 PBI ® Matrix ® Assault Gear Coat AR015 PBI ® Matrix ® Assault Gear Pants

22

1.800.323.0244 | www.edarley.com/turnout

#255(p007-038)Turnout Gear

1/11/11

1:19 PM

Page 23

Pant Features

Coat Features

Inner hook and loop/outer hook and dee closure 6" rear bib 3" 3M Scotchlite™ lime yellow/silver triple trim 2 - 10"x10"x2" cargo pockets Gold Arashield knees with thermal reinforcements Gold Arashield reverse tapered cuffs Aramid thermal, Stedair 3000 MB liner Nomex® webbing take ups Expansion knees on all three layers

32” length Inner zipper, outer hook and loop closure 3-piece body with Drag Rescue Device (DRD) 3M Scotchlite™ lime yellow/silver triple trim with NYC pattern 9"x3"x2" radio pocket Left and right chest mic clips Gold Arashield cuffs Nomex® knitwrist with thumbhole 9"x9"x2" combo cargo handwarmer pockets Aramid thermal, Stedair 3000 MB liner Expansion back-pleats on all three layers

Expansion Pleats

H-Back Suspenders

Turnout Sizing Coat Size Small

Specify size: Small, medium, large, XL, XXL BG553 32" Nomex®/Kevlar® Khaki Performance DX32 Coat BG554 Nomex®/Kevlar® Khaki Performance DX32 Pants Specify color: Yellow or black Specify size: Small, medium, large, XL, XXL BG555 32" Nomex® Yellow Performance DX32 Coat BG556 Nomex® Yellow Performance DX32 Pants

Chest Sleeve 36"-38"

32"

Medium 40"-42"

34"

Large

44"-46"

35"

XLarge

48"-50"

35"

2XLarge 52"-54"

36"

Pants Size Small

Specify size: Small, medium, large, XL, XXL BG559 32" PBI® Performance DX32 Coat BG560 PBI® Performance DX32 Pants

TURNOUT GEAR

Darley Performance DX32 Gear

Waist Inseam 30"-32"

29"

Medium 34"-36"

29"

Large

38"-40"

29"

XLarge

42"-44"

29"

2XLarge 46"-48"

29"

* Please see page 329 for a detailed sizing guide.

Darley Performance DX35 Gear Coat Features 35” length 1-piece body with Drag Rescue Device (DRD) 9"x3"x2" radio pocket Left and right chest mic clips 3" 3M Scotchlite™ solid trim w/chain stitching Gold Arashield shoulder caps and cuffs Nomex® knitwrist Patch with drain reinforced with Kevlar twill side pockets Standard Stedair 3000 MB waterwells 1-piece body liner made of Nomex®, Q thermal, Stedair 3000 MB

Pant Features Regular rise pant back Inner hook and loop/outer hook and dee closure Serged and double needle lock stitched inseam 3" 3M Scotchlite™ solid trim w/ chain stitching 2 - 10"x10"x2" pockets reinforced with Kevlar twill Gold Arashield knees with thermal reinforcements Gold Arashield cuffs Liner made of Nomex®, Q thermal, Stedair 3000 MB Nomex® webbing take ups

Removable DRD

Seamless Collar

Specify coat and pant size (See chart above) Specify color: Yellow with red/orange solid trim or Black with lime/yellow solid trim BG500 Darley Performance DX35 Coat BG501 Darley Performance DX35 Pants

1.800.323.0244 | www.edarley.com/turnout

23

TURNOUT GEAR

#255(p007-038)Turnout Gear

1/11/11

1:21 PM

Page 24

Fire-Dex ® Nomex IIIA® Express

Removable DRD

Traditional 35" Coat Affordable turnout gear in 1 week or less! Express turnout gear features 7.5 oz. Nomex IIIA® outer shell, quilted Nomex thermal liner with Stedair 3000 liquid barrier, plus all the standard features shown below. Meets NFPA 1971, 2007 Edition. Ship. wt. pants 4 lbs., coat 6 lbs.

Ships in one week or less

Turnout Sizing

Coat Features

Coat

35" length Four-ply collar with thermal/moisture barrier with hook & pile closure Inner Velcro®, outer hook and dee closure Leather shoulder caps 2" and 3" Scotchlite™ combo trim 10"x10" patch pockets reinforced with Kevlar® Sleeves with waterproof wells, knitwrists and leather cuffs

Size Small

36"-38"

32"

Medium 40"-42"

34"

Large

44"-46"

35"

XLarge

48"-50"

35"

2XLarge 52"-54"

36"

Pants

Pant Features Inner Velcro®, outer hook and dee closure Leather take-up strap with buckle Leather reinforced knees and cuffs 2" Scotchlite® trim 10" x 8" leather knee patches Semi-bellow 9"x10"x2" pocket on right side

Chest Sleeve

Size Small

Accessories not Included

Waist Inseam 30"-32"

29"

Medium 34"-36"

29"

Large

38"-40"

29"

XLarge

42"-44"

29"

2XLarge 46"-48"

29"

* Please see page 329 for a detailed sizing guide. Specify coat and pant size Specify color: yellow with red-orange trim or black with lime-yellow trim AR018 Nomex IIIA® Express Coat AR019 Nomex IIIA® Express Pants

Fire-Dex ® Basofil ® Assault Gear™ Basofil® blocks heat better, allowing for a lighter and less bulky set of turnout gear.

Coat Features 32" length Two combination handwarmer, semi-bellows pocket Radio pocket Inner zipper with Velcro® outer closure Reflective trim (as pictured)

Removable DRD

Pant Features High back design for added protection 29" inseam standard Two bellows pockets (10" x 10" x 2") Inner zipper/outer Velcro® closure Reinforced cuffs and knees (Arashield® on Basofil®) Free “H” back suspenders

Accessories not Included Specify coat and pant size (See chart above) Specify color: Gold with lime/yellow triple trim or red/orange triple trim AS355 Basofil® Assault Coat AS356 Basofil® Assault Pants AS51901 Custom Name Panel AS51902 Letters

24

1.800.323.0244 | www.edarley.com/turnout

#255(p007-038)Turnout Gear

1/11/11

1:24 PM

Page 25

TURNOUT GEAR

Darley First Strike Gear UL Certified Compliant to NFPA Standard 1971-2007 Edition.

Coat Features Nomex® Aramid IIIA outer shell Inner liner assembly: fully-removable Nomex® quilt (Q/9) thermal barrier sewn to Stedair 2000 Moisture Barrier Lime/yellow Scotchlite™ reflective triple trim 7"x9" liner pocket 2 - 10"x10" patch pockets with flap and Velcro® closure Insulated outer storm-fly with hook and dee closure system Snap inner closure Radio pocket and MicTab Leather sleeve cuff

Pant Features Nomex® Aramid IIIA outer shell Velcro® hook and dee closure Inner liner assembly: fully-removable Nomex® quilt (Q/9) thermal barrier sewn to Stedair 2000 Moisture Barrier Lime/yellow Scotchlite™ reflective triple trim Insulated front fly, snap-hook and dee retainer Padded leather knees Leather cuffs Side take-up straps

Specify coat and pant size Specify color: black, yellow or tan *Yellow and black ships in 1-2 weeks, tan 3-4 weeks AZ595 Darley First Strike Gear Coat AZ596 Darley First Strike Gear Pants

Ranger Combat Ready Gear Fire Fighting is stressful enough without having to fight your gear too. That’s why we used our experience making Morning Pride brand turnouts that allow the gear to move with the firefighter’s body, not against it. Mobility, comfort, toughness. Ranger Combat Ready Bunker Gear has it all.

Tails™ Features Kevlar®/Nomex® outer shell Aralite®/Nomex® thermal liner facecloth Stedair moisture barrier Comfort chinstrap Coat cuffs Velcro® zipper closure Nomex® tabbed long wristlets Articulating rapid rescue strap with new coat Lime 2-tone Scotchlite™ reflective triple trim Radio chest pocket Half high bellow pockets Mic Tab Accessories not Included

Pant Features Kevlar®/Nomex® outer shell Aralite®/Nomex® thermal liner facecloth Stedair moisture barrier 1" narrow Velcro® fly Lime 2-tone Scotchlite™ 3" cuff trim Kevlar®/Nomex® bellows pockets Reinforced knees - Arashield gold Dyna-Fit Suspenders

Turnout Sizing Coat Size Small

Chest Sleeve 36"-38"

33"

Medium 40"-42" 331/2" Large

44"-46"

34"

XLarge

48"-50"

34"

2XLarge 52"-54"

34"

Pants Size Small

Waist Inseam 30"-32"

30"

Medium 34"-36"

30"

Large

38"-40"

30"

XLarge

42"-44"

30"

2XLarge 46"-48"

30"

* Please see page 329 for a detailed sizing guide.

Specify coat and pant size BK207 Ranger Tails™ Coat (Kevlar®/Nomex® OS Gold) BK208 Ranger Pants (Kevlar®/Nomex® OS Gold)

1.800.323.0244 | www.edarley.com/turnout

25

TURNOUT GEAR

#255(p007-038)Turnout Gear

1/25/11

8:37 AM

Page 26

Aluminized Cover Helmet The Aluminized Cover Helmet provides all of the improved fit, ride, components and tough “FYR-Glass” shell to meet the NFPA 1976, 2000 edition performance requirements for proximity / ARFF operation. “Lite Force Plus Proximity” is certified to meet these new requirements. Ship. wt. 5 lbs. Standard “Prox” configuration with adjustable throat protector Shroud/earflaps have breathable W.L. Gore moisture barrier and are lined with a “Protective Comfort” quilted FR cotton facecloth thermal liner Includes gold-coated, 6" faceshield & helmet cover

AS306

Aluminized Cover Helmet

Aluminized Attack Gear With occupational hazards becoming more complex, you can be confident that the Aluminized Attack Gear offers superior protection. When you have to face high temperatures or high risk situations, this gear provides the ultimate protection.

Coat Features:

Pant Features:

Zipper/Velcro closure Leather cuff reinforcements Neoprene sleeve wells 4" Nomex® wristers 9x9 patch pockets “Easy Grip” DRD Hanger loop Liner inspection port Thermal enhanced liner shoulders Nomex® liner pocket Die-cut leather backed hardware

Velcro/hook & dee fly closure Leather cuff reinforcements Boot cut Self material take-up straps Liner inspection port Self material knee reinforcements Double layer padded knees Die-cut leather backed hardware 8-point suspenders

Specify sizes: S-XL BK262 35” 7oz Aluminized PBI Attack Coat BK263 Optional 8"x3.5"x2" Radio Pocket BK264 7oz Aluminized PBI Attack Pants

Aluminized Complete Approach Suit Designed for personnel engaged in maintenance, repair and operational tasks in areas of low ambient temperature up to 200°, or high radiant heat up to 2000°. The aluminized glass suit comes with 32" coat, hood with gold reflective faceshield, pants, gloves and boots. Will accommodate SCBA. Not for fire entry. Ship. wt. 25 lbs.

Cat# L540

26

Description Complete Approach Suit

1.800.323.0244 | www.edarley.com/turnout

S, M, L

XL

#255(p007-038)Turnout Gear

1/11/11

1:27 PM

Page 27

A

B

D

C

E

A. EZ Adjust Padded Suspenders

D. Traditional Suspenders

Designed with 8-point attachment. EZ release - just push up with finger or thumb. EZ tighten - just pull down on the EZ to find round rings. Pads are made with FR rated closed cell foam and sewn to allow for adjustment by end user. 47" length. Ship. wt. 1 lb.

Materials

BG243

Construction Crossover style, heavy-duty elastic Crossed in rear with leather back patch 8-point leather tabs, 42" long All seams double stitched for added strength

Heavy-duty elastic ends Eight-point metal clips

2" H-Style suspenders Heavy-duty cotton webbing AZ243 AZ244

Straps: Polypropylene red, heavy-duty elastic, 2" wide, .055" thickness, 400 minimum tensile strength Attachment point elastic: 1/2" wide, double layer, 51/2" long for each of 8 button tabs Leather tabs: eight leather tabs for button attachment Leather back patch

EZ Adjust Padded Suspenders

B. Turnout Suspenders Reflective Suspenders Non-Reflective Suspenders

BD015

C. H-Style Suspenders Elastic Suspenders Non-Elastic Suspenders

A. Darley Winter Hood

Traditional Suspenders

E. Padded Suspenders 8-pt. heavy-duty button attachment Extra large “quick adjust” rings to accommodate gloved fingers

Features your choice of 2" elastic or non-elastic webbing with leather ends. An excellent choice for high back pants. Ship. wt. 1 lb. AW116 AW117

TURNOUT GEAR

More suspenders in Wildland (p39-49)

“H” back design Heavy-duty cotton webbing Foam padded straps

Specify size: S (36"), M (42"), L (48") BG568 Padded Suspenders A

B

C

Insulated against the hazards of both severe heat and frigid temperatures by combining knitted PBI blend on facing for top flame protection (external) while 100% Nomex (internal) protects against cold temperatures. Front and back extensions protect the entire neck and single ply crown top prevents bulking under helmet. Reinforced adjustable face opening allows for positive face mask seal when worn properly with breathing apparatus. Wear it with eyes only exposed or open faced. Ship. wt. 2 lbs. One size fits all X891 Darley Winter Hood-PBI

B. Carbon X Hood Highest Flame Resistance 50% Higher than Nomex 30% Higher than PBI

Lightweight Yet Excellent TPP

Non-flammable If exposed to extreme heat or flame, fabric glows but won’t burn Retains a certain tenacity at temperatures exceeding 2300°F for over 90 sec.

20% Lighter than most NFPA compliant hoods TPP rating of 28 One size fits all AW017 Ultimate™ Carbon X Hood AW115 Classic™ Carbon X Hood

C. OSHA Hoods

AW115

OSHA Nomex hoods seal tight around the face or SCBA masks to offer superior protection against heat and flames. The 6 oz. singlelayer short hood reaches to the base of neck. One size fits all. Ship. wt. 1 lb. One size fits all AS039 OSHA Short Hood-Nomex

1.800.323.0244 | www.edarley.com/turnout

27

TURNOUT GEAR

#255(p007-038)Turnout Gear

1/11/11

1:27 PM

Page 28

Our Best Hood Deal Nomex® Blend Hood UL/NFPA Compliant One-piece construction with shoulder insert 19" overall length One size fits all Nomex®/Lenzing blend AZ152

Nomex® Hood

Pac II Hoods

Add A Little Color Meets NFPA Standards (1971-2000 Edition)

Features easy-sealing face opening that fits snugly for maximum protection and keeps its shape even after repeated usage. Elastic face opening stretches to 15" for easier donning. Flat seams won’t dig and seamless chin area provides for added comfort. Hood is 2-piece construction, notched shoulder with insert. One size fits all. Ship. wt. 1 lb.

Old Glory Red, White & Blue 100% Nomex®

Convict Black & White 100% Nomex®

Tie Dyed Multi-colored Nomex® Blend

Flame Multi-colored Nomex® Blend

All Pac II hoods meet NFPA and CAL/OSHA standards. Ship. wt. 1 lb. AS717 Pac II Hood, Old Glory AS718 Pac II Hood, Convict AS719 Pac II Hood, Tie Dyed AZ161 Pac II Hood, Flame

Protective Hoods That Go On Easy & Seal Tight Meets NFPA Standards (1971-2000 Edition) Features easy-sealing face opening that fits snugly for maximum protection and keeps its shape even after repeated usage; elastic face opening stretches to 15" for easier donning. Flat seams won’t dig and seamless chin area provides for added comfort. Full 13" double layer head for better face and neck protection. Double 8" back and front bib keeps hood from coming untucked. One size fits all. Ship. wt. 1 lb.

AK020 Notched shoulder AK020 Nomex Hood AK022 PBI Hood

28

1.800.323.0244 | www.edarley.com/turnout

Black

Navy

Black

Grey

Specify color AK021 P84 Hood

CarbonKnight Hood With a TPP rating of ~37.4, Carbon Knight hoods have the highest TPP rating on the market - that is 87% higher than the NFPA requirement of 20! Manufactured with a double layer of black thermal knit material, CarbonKnight hoods are wider than the competition, which allows for superior air circulation. CarbonKnight is a tri-blend composition with added Kevlar for superior strength and durability. Ship. wt. 1 lb. TPP rating of 37.4 Meets 18" NFPA minimum requirement

Color: Black AZ246 CarbonKnight Hood

Ultra C6 Hood Protection...Comfort...Function The new carbon tri-blend Ultra C6 has been engineered to address the concerns and needs in the safety world. Its unique mix of fibers maximizes the inherent performance properties of each fiber to provide optimal protection and comfort. Enhanced comfort adds to functionality and improves performance and efficiency in the workplace. Ship. wt. 1 lb. One piece 100% Nomex thread with notched shoulder Length: 18", face opening: 5" Meets or exceeds NFPA 19712007 Edition & is UL certified

Color: Black BH029 Ultra C6 Hood

Navy

Red

Yellow

#255(p007-038)Turnout Gear

1/11/11

1:28 PM

Page 29

TURNOUT GEAR

Fire-Dex® 911 ™ Helmet The 911® helmet provides solid, dependable, comfortable protection in a multitude of environments and still allows for a wide range of vision and long-use. Helmet shell is made of the lightest fiberglass composite offering superior protection against high temperature and chemical hazards. Its unique foam impact insert assembly provides even more top and side protection. Long lasting, easy-to-clean, high-gloss, flame-retardant finish resists scratches and UV rays. Replaceable 4" PPC wrap around face shield features an easy-to-operate tension adjustment and plastic bracket to provide maximum dielectric protection. Meets NFPA 1971, 2000 Edition. Ship. wt. 5 lbs. Colored throughout fiberglass compression molded shell Fiberglass shell has superior flame and heat resistance Thermal impact cap is a low density injection mold, 2 pieces that are inseparable 6 way overhead suspension straps allowing for a more customized helmet “ride” 3 piece headbanf with ratchet assemly for easy adjustments (6.5"-9") Red

Specify color AM003 Fire-Dex® 911™ Helmet

Black Yellow White

Cairns 1010 Traditional Style Helmet Features new tough, through color, reinforced, high-temperature resistant, molded fiberglass composite shell that resists cracking and chipping. Cairns’ patented shell release helps reduce the chance of neck injury by allowing the shell to release, leaving the impact cap behind for protection under severe upward impact. Beneath the shell is a high-temperature foam cap for increased thermal and impact protection. Headband features adjustable front for perfect fit between helmet and SCBA mask and 3-position rear ratchet adjustment. Other features include high- temperature edge trim, faceshield wing protectors, Nomex® chinstrap with quick- release and postman slide, Nomex® neck/ear protector and 4" Tuffshield faceshield. Helmet fronts sold separately. Meets NFPA 1971, 2000 Edition. Ship. wt. 5 lbs. Red

Black Yellow White

Blue

Specify color AF781 Cairns 1010 Helmet

Replacement Faceshields AF093 AF094

Cairns 660 Rep. Faceshield Cairns 1010 Rep. Faceshield

$56.95 $60.95

Cairns 660C Fiberglass Helmet Helmet shell is reinforced, high-temperature resistant molded fiberglass. Cairns’ patented shell release helps reduce the chance of neck injury by allowing the shell to release, leaving the impact cap behind for protection under severe upward impact. Beneath the shell is a high-temperature foam cap for increased thermal and impact protection. Headband features adjustable front for perfect fit between helmet and SCBA mask and 3-position rear ratchet adjustment. Other features include full brim, high-temperature edge trim, faceshield wing protectors, Nomex® chinstrap with quick-release and postman slide, Nomex® neck/ear protector and 4" Tuffshield faceshield. Helmet fronts sold separately. Meets NFPA 1971, 2000 Edition. Ship. wt. 5 lbs. Red

Black Yellow White

Blue

Specify color AA843 Cairns 660C Fiberglass Helmet

1.800.323.0244 | www.edarley.com/helmets

29

TURNOUT GEAR

#255(p007-038)Turnout Gear

1/11/11

1:31 PM

Page 30

The FireDome ® LT™ Helmet The FireDome® LT structural fire helmet is the result of 20 years of Bullard engineering, polymer technology and expertise. The Bullard Tough LT comes standard with the all-new and innovative, patented Quick-Attach Blade System, that permits the firefighter to simply press on or off either a blade-mounted faceshield or blade-mounted goggles in seconds. This helmet can also be enhanced with a variety of optically correct visors, goggles, and neck protectors to equip your fire department with complete head, face and neck protection to meet your specific applications. With the new compact design and lower center of gravity, the LT keeps weight evenly distributed and holds the helmet stable on the head. Meets NFPA 1971, 2007. Ship. wt. 5 lbs. Compact Lightweight

Innovative Low center of gravity Red

Change from goggles to facemask in seconds

Blue Yellow Orange Lime

Specify color AW498 FireDome® LT Helmet with Faceshield AW499 FireDome® LT Helmet with Goggles

Black White

Firedome ® UST Traditional Helmet

AW499

Comfort and protection is now better than ever. The UST’s outer shell is made with Thermoglas® offering a new standard of toughness and durability without sacrificing comfort. Chipping and cracking found in conventional fiberglass helmets is virtually eliminated while still providing chemical resistance and stability at extreme temperatures. The UST features impact liner, high-heat thermoplastic inner shell, Sure-Lock® adjustable headband, replaceable and washable brow pad, Nomex® chin strap with quick-release buckle and postman’s slide fastener, Nomex® ear/neck protector, brass eagle, reflective tetrahedrons, and your choice of 4" faceshield or goggles. Meets NFPA 1971, 2007. Helmet fronts sold separately. Ship. wt. 5 lbs. Brass Eagle included

Red

Specify color AW373 FireDome® UST Helmet with Faceshield AW374 FireDome® UST Helmet with Goggles

Black Yellow White

Firedome ® Helmets Fiberglass or Thermoplastic outer shell Urethane foam impact liner provides insulation from heat, impact and penetration Chin strap with combination adjustment Sure-Lock® Ratchet for easy adjustment Red

Blue Yellow Orange Lime

Nylon or Nomex® energyabsorbing crown strap Optically correct faceshield Nomex Ear/Neck Protector Inner Shell

Black White

AW374

2-year warranty

FireDome ® FX Helmet - Fiberglass Firefighters frequently exposed to chemicals and hydrocarbons appreciate the FireDome® FX with a resin-bonded fiberglass outer shell. Fiberglass helmets are more resistant to chemical attack and more stable at extreme temperatures than those made of thermoplastic. Meets NFPA 1971, 2007. Ship. wt. 5 lbs. Specify color (see colors listed above) AF086 FireDome® FX Helmet with Faceshield AS354 FireDome® FX Helmet with Goggles

FireDome® PX Helmet - Thermoplastic Firefighters who need a more durable helmet choose the FireDome® helmet with injection-molded thermoplastic outer shell. Constructed with a high-heat thermoplastic providing greater impact and penetration resistance than fiberglass; plus it’s more reliable with repeated heat exposures. Meets NFPA 1971, 2007. Ship. wt. 5 lbs.

Specify color (see colors listed above) AF088 FireDome® PX Helmet with Faceshield AS027 FireDome® PX Helmet with Goggles

30

1.800.323.0244 | www.edarley.com/helmets

Shown with faceshield Shown w/goggles

#255(p007-038)Turnout Gear

1/11/11

1:59 PM

Page 31

TURNOUT GEAR

Structural Fire Helmet with Faceshield and TrakLite™ Helmet Lighting System Bullard TrakLite™ integrated helmet lighting system blends engineering, functionality and safety to help firefighters see forward in dark or smoky conditions without bulky or cumbersome additions. Performance: Features 8 bright white LEDs protected behind heatresistant glass, TrakLite™ provides a readily-available source of light in most any situation. TrakLite™ also features a bright blue “buddy indicator” light on the rear of the helmet. Safety First: The weight of TrakLite™ is distributed between the front and rear of the helmet to offer a more balanced lighting solution. Easy Operation: Single rotary switch powers both the front LEDs and the rear buddy indicator light. Powered by four AAA batteries. Runtime of at least 6 continuous hours at a minimum brightness level of 50%. Red

Blue Yellow Orange Lime

Black White

Specify helmet color BK091 Structural Fire Helmet w/Faceshield and TrakLite™ Helmet Lighting System

Ben Franklin 2 Plus Traditional Helmets

5-year warranty

You can’t beat the combinations of a traditional styled helmet with the strongest outer shell on the market by Morning Pride. Ship. wt. 4 lbs. Strongest Shell on the Market - Test show that FYR-Glass is 42% more resistant to impact penetration than helmets made of Fiberglass FYR-Glass Technology - Provides a helmet that is lighter, lower ride, more comforatble and better fitting High Heat Performance - No other shell finish stands up to high heat like FYR-Glass Low Ride, Better Fit, Low Center of Gravity - 8-point suspension and wider interior gives wearer superior comfort and fit More Sizes, More Adjustability - Our headband/ratchet will fit the largest range of hat sizes of any NFPA helmet on the market - plus for position depth adjustments Accessories - Screaming eagle, padded adjustable ratchet system, protective Nomex® earflaps, combo adjustable chin strap, Reflexite patches. Leather shield not included. Meets and exceeds NFPA 1971, 2000 Red

Black Yellow White

Specify helmet color AR319 Ben Franklin 2 Plus Helmet with Goggles AR318 Ben Franklin 2 Plus Helmet with Faceshield

Lite Force Plus Modern Helmets Morning Pride’s very best modern helmet is the perfect choice for comfort, safe head protection. Ship. wt. 4 lbs. Strongest Shell on the Market - Test show that FYR-Glass is 42% more resistant to impact penetration than helmets made of Fiberglass FYR-Glass Technology - Provides a helmet that is lighter, lower ride, more comforatble and better fitting High Heat Performance - No other shell finish stands up to high heat like FYR-Glass Low Ride, Better Fit, Low Center of Gravity - 8-point suspension and wider interior gives wearer superior comfort and fit More Sizes, More Adjustability - Our headband/ratchet will fit the largest range of hat sizes of any NFPA helmet on the market - plus for position depth adjustments Accessories - Padded adjustable ratchet system, protective Nomex® earflaps, combo adjustable chin strap, Reflexite trim Meets and exceeds NFPA 1971, 2000 Red

Black Yellow White

Specify helmet color AR321 Lite Force Plus Helmet with Goggles AR320 Lite Force Plus Helmet with Faceshield

1.800.323.0244 | www.edarley.com/helmets

31

TURNOUT GEAR

#255(p007-038)Turnout Gear

1/11/11

2:01 PM

Page 32

Authentic Leather Helmet Shields Made the old-fashioned way, these shields combine tightly sewn layers of first rate, 100% genuine leather throughout with meticulous detailing. No other leather shield is finer. Shields are custom-made and non-returnable. Available in both 4" or 6" sizes and your choice of color for shield, panel, lettering and center piece, as well as different configurations. Ask your Darley representative for a Shield Ordering Form. Ship. wt. 1 lb.

Shield Centers A variety of shield centers are available at an additional cost. Please ask your Darley representative. AR031 AR03401 AR035 AR036

Authentic Leather Shield Center Ornament for 4" Shield Center Ornament for 6" Shield Center Decal for 4" and 6" Shield

Scotchlite ® Helmet Shapes

Specify color: lime/yellow, red/orange AR038 Helmet Bar AR039 Helmet Tetrahedron AR040 Helmet Diamond AR041 Helmet Tetra Bar

Self-Adhesive Helmet Decals Rescue, Fire, and Flag Decals R715 R717 AF096

Rescue Decal Fire Helmet Decal Flag Helmet Decal

Personalized Crescents Try our personalized crescents! Each personalized crescent comes with white background and your choice of color letters (minimum order 25).

Specify personalized title AF095 Personalized Crescents

32

1.800.323.0244 | www.edarley.com/turnout

Leather Shields with Passport The shield and passport allow fire departments to know the whereabouts of their firefighters at all times. Each Passport shield comes with a removable, Velcro® center piece Passport bearing the firefighter’s name. When he takes a position, he removes the passport and places it on the engine. Shields are custom-made and non-returnable. Ship. wt. 1 lb.

Removable Passport

Specify size: 4" or 6". Specify color of shield, panel and lettering. Ask your Darley representative for a Shield Ordering form. AR032 Shields with Passport AR03402 Passport Only

Crescents White background with black letters

Crescent Titles FIREFIGHTER CAPTAIN CHIEF DEPUTY CHIEF LIEUTENANT RESCUE ASST. CHIEF BATTALION CHIEF COMMISSIONER PARAMEDIC HAZMAT TEAM

FIRST RESPONDER FIREFIGHTER/EMT FIRE RESCUE ENGINEER EMT FIRE POLICE RESERVE FIRE MARSHALL SAFETY OFFICER VOLUNTEER

Specify title R714 Crescents

#255(p007-038)Turnout Gear

1/11/11

2:07 PM

Page 33

TURNOUT GEAR

A-Tac ® Firefighter’s Goggles Protective goggles designed to specifically protect the firefighter in structural, wildland and other emergency situations. A-Tac® firefighter’s goggles pass the NFPA 5000 5-minute heat exposure test. Features a silicone strap and body with hard coated/anti-fog inner and outer lens. Fits over prescription, safety and sunglasses. Can be removed from the helmet, without tools and worn directly on head. Includes goggle clips for both traditional and contemporary helmets. Meets NFPA and ANSI. Ship. wt 1 lb. AM058

A-Tac® Firefighter’s Goggles

ESS Innerzone 2™ Goggles The ESS Innerzone 2™ is designed to withstand the rigors of structural collapses and other hazardous situations that demand primary eye protection, the Innerzone 2™ is fully NFPA compliant, including the 500˚ 5-minute NFPA oven test. NFPA 1971-2007 compliant. Functions well with all major structural firefighting helmet designs High heat-resistant mounting brackets carry a lifetime warranty and securely attach to helmet brim, no drilling required Patented Snap-on/Snap-off™ mounting system allows goggles to be stowed on the front or rear of a helmet Use on helmet alone or together with face shield or flip-downs 2-piece strap system made of 26mm-wide, high-memory woven Nomex® Frame made from high heat-resistant materials Full-perimeter ventilation and filtration system Lenses feature ESS ClearZone™ anti-fog and anti-scratch lens coating Lenses provide 100 UVA/UVB protection and precise optical clarity for distortion-free vision Lenses are highly impact resistant and exceed the impact requirements of ANSI Z87.1-2003+ AR306

Innerzone 2™ Snap On/Off Mounts

Goggle Clips Included

AR306

Snap-On/Off™ Mounts

Innerzone 3™ Wraparound Straps The ESS Innerzone 3™ features a wrap-around strap system that secures to structural helmets with two Velcro® tabs. Designed to protect eyes during extrications, USAR, and other hazardous situations that demand primary eye protections. The Innerzone3™ is fully NFPA compliant, including the 500˚ 5-minute NFPA oven test. NFPA 1971-2007 compliant. Functions well with all major structural firefighting helmet designs Patented Speed Clip™ strap system makes adjustment quick and easy 2-piece strap system made of 26mm-wide, high-memory woven Nomex® Frame made from high heat-resistant materials Full-perimeter ventilation and filtration system Lenses feature ESS ClearZone™ anti-fog and anti-scratch lens coating Lenses provide 100 UVA/UVB protection and precise optical clarity for distortion-free vision Lenses are highly impact resistant and exceed the impact requirements of ANSI Z87.1-2003+ BC014

Wraparound Strap

BC014

Innerzone 3™ Wraparound Straps

Fire Goggles Structural goggle complies with NFPA 1971 Standard .075" Ballistic Grade Lens protects against impact Passes the NFPA 500 degree Fahrenheit 5-minute heat test Optically correct lens has anti-fog coating on both sides to ensure visibility and longer life Non-vented design protects against gases, smoke, fluids, flying particles, and debris Strap passes through goggle body and lens for secure attachment AW015 AW016

Anti-fog lens

Non-NFPA Clear Fire Goggles NFPA Fire Goggles

1.800.323.0244 | www.edarley.com/goggles

33

TURNOUT GEAR

#255(p007-038)Turnout Gear

1/11/11

2:08 PM

Page 34

Glove Strap

Add-A-Clip

Never Lose Your Gloves

The fast and easy method for attaching turnout gear. Ship. wt. 1 lb. Convenience Attach your gear right where you need it. Mounts almost anywhere. Simplicity Do it yourself. Threaded stud mounts easily, penetrates webbing or fabric, screws tight. Flexibility Three different clip-options to meet your most demanding applications.

AS044 AS044 AS045 AS046 AZ242

AZ242 AS045 Add-A-Clip/Split Ring Add-A-Clip/Swivel Snap Clip Add-A-Clip/Side Release with Ring Add-A-Clip/Snap Clip

Keeps gloves ready to use and easy to locate Strap clips easily onto your turnout gear or bag with nickel plated clip Secure with heavy-duty Velcro® closure Ship. wt. 1 lb.

Velcro® Fastener

Specify color: red, yellow, or black AJ109 Glove Strap

Gear Keeper Mic Retractor The Gear Keeper is a rugged, retractable gear attachment system, designed to utilize and protect gear in severe environments with maximum break strength and durability. Fully extends to 20" and retracts safely back into place. It’s that easy; no more fumbling, dropping, dangling or damage. Ship. wt. 1 lb. Threaded stud mount High-impact case Patented flushing system salt water proof Multi-force options

AS046

Shield Saver Protects both sides of faceshield to prevent scratches Reduces eye injuries Durable marine-grade vinyl reduces frequency of faceshield replacement Velcro® closure Available for 4" or 6" faceshields Ship. wt. 2 lbs.

Specify size: 4" or 6" AW142 Shield Saver

AR303 Gear Keeper Mic Retractor

Personalized Accountability I.D. Tags Firefighters’ personalized durable plastic I.D. tags. Various colors available for customizing your emergency system. Heavy-duty trigger snap attaches to turnout gear. A simple system for satisfying accountability requirements of the fire service. Comes inscribed with Fire Department Name, Firefighter Company Number and Firefighter Name all in white letters. Yellow & white tags come with black lettering. Ship. wt. 1 lb.

Bourke Eye Shield

Specify color and inscription AF084 Accountability Tags.

Made of extremely tough polycarbonate plastic. Offers excellent eye and upper face protection, yet won’t trap smoke. Mounts easily and snugly on helmet brim. Lens holders are aluminum, other parts stainless steel. Hinged feature allows instant protection. Uses two brass screws to hold shield to brim. Ship. wt. 1 lb.

PX/FX Replacement Faceshields 4" Faceshield Hard-coated PPC Enhanced optics Mounting hardware not included 6" Faceshield Hard-coated polycarbonate Mounting hardware not included

Specify color: Clear, Smoke, Amber, or High Temp Yellow R726 Bourke Eye Shield

34

1.800.323.0244 | www.edarley.com/turnout

AF091 AF092

Replacement Faceshield 6" Replacement Faceshield 4"

#255(p007-038)Turnout Gear

1/11/11

2:09 PM

Page 35

TURNOUT GEAR

A. Fire Fighter Gear Bag One of the biggest gear bags in the industry Now available with wheels Overall bag size - 29"x17"x16" Main compartment - 18"x17"x16" 4 additional pockets including an extra large helmet pocket Reflective trim along straps and on bottom Vented main compartment with Velcro® front closure

A

BK201 BK200 BK201

Fire Fighter Gear Bag with Carrying Strap Fire Fighter Gear Bag with Wheels

B

B. Jumbo Gear Bag There is plenty of room in this one. It has four pockets along with the main storage area. The end pocket on the left is 8"Wx15"D x17"H, the right pocket is 3"Wx15"Dx17"H, along with two slot pockets. The overall measurements are 33"Lx15"Dx17"H. ID window, handle wrap, and Maltese Cross. Nylon. Red with Maltese Cross. Ship. wt. 3 lbs. AS037

Jumbo Gear Bag

C. Wide Mouth Darley ® Gear Bag Features a zipper top, making it the fastest opening bag on the market. Loading and unloading your gear has never been easier. Made of Cordura® nylon with 11/2" straps held together with Velcro® closures. Gear bag measures 24"Lx17"Hx14"W. Red with Maltese Cross. Ship. wt. 2 lbs.

BK186

C

Wide Mouth Darley® Gear Bag

D. Step-In Gear Bag

Shop online for more bags 24/7 at edarley.com/bags

This popular style gear bag allows you to use it at the fire scene as a dressing platform. Leave your boots upright and step into your boots and bunker pants. Pocket inside the bag holds your hoods and gloves. Made of durable Cordura® nylon with urethane inside coating and strong 2" wide heavy-duty poly-propylene carrying straps. Large 151/2"D x181/2"Wx20"H main compartment with lockable zipper. Red with Maltese Cross. Ship. wt. 2 lbs.

AC536

Gear not included

D

Step-In Gear Bag

1.800.323.0244 | www.edarley.com/bags

35

TURNOUT GEAR

#255(p007-038)Turnout Gear

1/11/11

2:09 PM

Page 36

A. Alpha Gear Bag Designed to hold turn out coat, pants, helmet, boots, and miscellaneous equipment. A 11⁄2" web handle supports the weight of the bag’s contents. This bag is 25% larger than the average gear bag on the market. The extra large size measures 131⁄2" x 16" x 24". Made of heavy Cordura® nylon with a urethane coated back. Has a #10 YKK self-repairing nylon coil zipper. Logo: Fire Fighter wording only, in gold print. 5,200 cu. in. Ship. wt. 1 lb.

Color: Red with Black trim BK188 Alpha Gear Bag

A

B. Darley Turnout Gear Bag Available in two sizes, this bag is designed to hold your turnout coat, helmet, boots and other miscellaneous equipment. Bag features a front outside zippered pocket to carry smaller items. Standard bag measures 131/2"Lx13"Hx24"W. The extra-large gear bag has 25% more room measuring 131/2"Lx16"Hx24"W. Available in choice of plain red, red with Maltese Cross or Royal Blue with Star of Life. Ship. wt. 3 lbs.

Red

B

Blue

Specify color: Plain Red, Red with Maltese Cross or Royal Blue with Star of Life AJ093 Standard Turnout Gear Bag AJ027 Extra-Large Turnout Gear Bag

C. Deluxe Step-In Gear Bag Designed with large zippered flap that allows the responder to access their turnout gear quickly. The flap, when unzipped, allows a dry surface to don the turnout gear. A vented and bellowed SCBA Mask Pocket keeps the mask dry and available for quick access. Large carrying straps can convert to a shoulder strap or back pack for easy transporting. Made of Cordura® nylon. measures 16"Wx16"Dx17"H plus SCBA pocket. 4650 cu. in. Ship wt. 1 lb. Red

Black

C

Yellow Black

Specify color: Red/Black or Yellow/Black BB125 Deluxe Step-In Gear Bag

D. Walk-Away Gear Bag Oversized and loaded with features. Reflective trim, Maltese Cross, handle wrap, optional shoulder strap, vinyl bottom, ID window, zippered side pocket for gloves and personal items. Mesh vents on each side under the storm flaps allow the bag to vent while the flap protects the contents from extreme weather. The three-sided heavy-duty zipper allows you to open the bag and step into your bunker gear and walk away. Measures 16"x19"x18"H. nylon. Red with Maltese Cross. Ship. wt. 3 lbs. AS035

36

Walk-Away Gear Bag

1.800.323.0244 | www.edarley.com/bags

D

#255(p007-038)Turnout Gear

1/11/11

2:10 PM

Page 37

TURNOUT GEAR

A. SCBA Carrying Bag Easy to transport and store, this durable, rectangular SCBA carrying bag features reinforced handles, a shoulder strap, and dual zipper entry. Internal padding protects SCBA and mask. Also features an accessory zipper pouch and internal straps with side release buckle. Dimensions: 30"Lx12"Wx13"H. Ship. wt. 3 lbs.

BG532

SCBA Carrying Bag

A

B. Darley Nylon Mesh Turnout Bag The Darley Nylon Mesh Bag’s large size allows you to stuff all your gear into one bag. The heavy-duty, heavyweight, nylon weave poly webbing allows for air circulation. Black mesh with lime yellow straps. Measures 24"x15"x15". Ship. wt. 2 lbs.

AC537

Mesh Turnout Bag

B

C. Hazmat Equipment Bag A great way to organize and carry your hazardous materials clothing and equipment. Made of heavy-duty Cordura® nylon. #10 YKK nylon zipper and a 2" web handle to support the load. Has an outside pocket for extra gloves and small items. Royal blue with yellow lettering. Measures 131/2x13"x24". Ship. wt. 2 lbs.

AW362

Hazmat Equipment Bag

C

D. Extinguisher -Aide Portable Fire Extinguisher Bag Designed by a firefighter for all emergency responders Fits most all 2.5 gallon pressurized water, 20 lb. ABC, and 20 lb. CO2 extinguishers Made from durable Cordura® material: resistant to the elements & tears Side pocket with Velcro® closures for storing wedges or other hand tools Host strap with Velcro® closure big enough for most CO2 extinguishers 42" shoulder strap allows freedom of movement with both hands for other fireground operations Reduces responder fatigue from carrying extinguishers by hand Promotes responder safety by providing an easier means for carrying protection on investigations, wildland fires, car accidents, and nuisance fires Fits neatly inside extinguisher brackets, equipment compartments, and wall cabinets Made in the U.S.A./patent pending 8" plastic base to prevent scuffing and increase sturdiness

Specify color: black w/lime, black w/orange, tan w/lime, tan w/orange BE027 Extinguisher-Aide Portable Fire Extinguisher Bag

8" plastic base

D

Cargo Pocket

1.800.323.0244 | www.edarley.com/bags

37

TURNOUT GEAR

#255(p007-038)Turnout Gear

1/11/11

2:11 PM

Page 38

Utility Bags Responder’s Every Day bags are made from 1050D nylon with a durable water-resistant coating. Imported. YKK® self-healing zippers with oversized pulls Light colored interior makes it easier to see contents Robust grab and haul handles Interior hanging pocket Flag holder, WriteBar™ and ID window BK132: 23"x15" x19", 6555 cubic in. BK133: 20"x11"x11", 2420 cubic in.

Color: Red BK132 BK133

BK132

BK133

Utility Bag Personal Bag

Wildland & Tanker Turnout Bags

BK135 BK134

BK134: Waterproof bottom Main compartment: 26"x14" x14", 5,096 cubic in. 2 Exterior pockets: 11.5"x11"x3", 759 cubic in.

BK135: Main compartment: 32"x16"x16", 8,192 cubic in. 2 - Exterior pockets: 13.5"x13"x3", 1,053 cubic in. BK134 BK135

Water repellent YKK® self-healing zippers Large oversized zipper pulls Prym® snaps Light colored interior Side pockets with bungee zipper stays Robust grab and haul handles

Wildland Bag Tanker Turnout Bag

Leather accents Flag holder, WriteBar™ and ID window Reflective trim on bottom front Interior hanging pocket Non-slip padded shoulder strap

BK136

Push+R+Pack The PUSH+R+ Pack is a medium-sized sling bag that can hold your every day or emergency essentials. Made from durable 1050D nylon with YKK® zippers. Two side pockets expand to hold 1-liter water bottles or equivalent sized items and the adjustable shoulder strap has a removable pad. Back of bag has belt loop and keeper strap with clasp. Main compartment: 8.5"x8.5"x4" Imported BK136

38

Push +R+ Pack

1.800.323.0244 | www.edarley.com/bags

Supplies not included

Suggest Documents