Fibre Channel Fiber-to-Fiber Media Converters
FC-155-XX & FC-131-XX
Standard Multi-mode & Single-mode series
FC-155-55E
Multi-mode to Extended Reach Multi-mode over standard fiber Illustrated: Standard Multi-mode to Single-mode Media Converters
Low
cost
Fibre
Channel
media
converters
by
Canary
Communications provide economical, long-range Gigabit data-rate connections and present increased flexibility to storage area network (SAN) design. Operating
at
1.0625
Gigabaud,
media
converters
Fiber-to-Fiber
Canary
Fibre
extend
the
Channel reach
FC-155-37/B
Multi-mode to Single-Fiber, Bi-Directional Single-Mode
FC-155W-XX
Multi-mode to Single-mode with ITU specified CWDM wavelengths
of
Fibre Channel over multi-mode and single-mode fiber and are typically used to link storage devices normally configured are
with
ideal
low-cost
for
data
multi-mode
intensive
interfaces.
backbones
They
in
the
enterprise or across the campus and can be used to create
and
capacity.
take
Use
advantage
Canary’s
Fibre
of
dispersed
Channel
storage
Fiber-to-Fiber
converters to economically link storage capacity and remote
or
back-up
servers
dispersed
throughout
the
network. Canary
offers
versions
using
standard
duplex
fiber
optics, versions providing Single-Fiber, Bi-Directional links and versions offering Extended Reach Multi-mode capability. support
Models with CWDM transmission wavelengths
Coarse
channelization
Wavelength for
ring architectures.
Division
long-distance,
Multiplexed
data
point-to-point
and
Models with similar capabilities
for Canary’s CCM-1600 and CCN-2000 chassis families are also available.
Maximizing storage potential ..…..when high speed connections matter
Economic long-range 1.0625 Gigabaud data transmission capability
Product Specifications
Fibre Channel Fiber to Fiber Converters
Power Supply: • • •
The pages that follow provide ordering information for Canary’s Gigabit Fibre Channel Fiber-to-Fiber Converter products.
External switching 100/240 VAC, 1.2/0.6 Amp 50/60 Hz
Mechanical:
• Standard 1.0625 Gigabaud Multimode to Single-mode series:
• • • • •
FC-155-XX • Multi-mode to Extended Reach Multi-Mode over standard fiber:
Height: 1.00” (2.54 cm) Length: 5.75” (14.61 cm) Width: 2.85” (7.24 cm) Ship Weight: 2.0 lb (0.9 Kg) Single Unit: 0.4 lb (0.2 Kg)
Environmental:
Operating Temp.: 0 to 49ºC Storage Temp.: -10 to 66ºC Relative Humidity: 5% to 95% noncondensing
•
FC-155-37A/B • Multi-mode to Single-mode with ITU specified CWDM wavelengths: FC-155W-XX
Regulatory: •
FC-155-55E • Multi-mode to Single-Fiber, BiDirectional Single-Mode:
Designed in compliance with CE, UL, CSA & TUV standards, ANSI X3T1 FC-AL Class 1 lasers conform to US 21CFR(J), EN 60825-1, UL 1950 and IEC-825
Specifications forYears, FC-155-55E Warranty: Five (5) parts and labor Environmental:
Operating Temp.: 0 to 49ºC Storage Temp.: -10 to 66ºC Relative Humidity: 5% to 95% noncondensing
Mechanical:
Height: Length: Width: Ship Weight: Single Unit:
1.00” 7.88” 8.14” 3.0 lb 2.5 lb
(2.54 cm) (20.0 cm) (20.7 cm) (1.4 Kg) (1.1 Kg)
WARRANTY STATEMENT Information contained within this document is subject to change without notice at Canary Communications’ sole and absolute discretion. Customer agrees that Canary Communications is not liable for any actual, consequential, exemplary or other damages arising from any use of the information contained herein. Canary warrants the performance of its products only in accordance with its stated Five-year or Three-year standard warranties. Canary Communications disclaims any and all other warranties including express, implied, statutory; and including warranties of merchantability or fitness for a particular purpose – except where prohibited by law. Canary Communications does not transfer rights to any copywrited software code contained within or used by Canary Products. © Canary Communications, Inc.2004 All rights reserved
Fibre Channel Fiber-to-Fiber Media Converters • FC-155-XX
Multi-mode to Single-mode series
• FC-131-XX
Single-mode to Single-mode series
• FC-155-55E
Multi-mode to Extended Reach Multi-Mode over standard fiber
Standard Fibre Channel multi-mode ports provide minimum over
transmission
62.5/125
50.0/125
µm
µm
distances
fiber
fiber.
or
In
of
500+
most
220+
meters
meters
over
installations,
Features include: •
Supports 1.0625 Gigabaud (Gigabit) data rate
•
Diagnostic LEDs
•
Simple plug and go installation
•
Transparent to Flow-Control commands
Standard Fibre Channel models with single-mode
•
Optional: UK, Continental European power
ports
ranging
•
Auto-sensing, 110 / 230 VAC Power Supply
from 10 to 70 kilometers over 9.0/125 µm single-
•
Dual power jacks for connecting optional,
actual transmission distances are significantly greater.
provide
transmission
distances
redundant power supply
mode fiber. •
Additional models include: Long-range single-
Canary’s Extended Reach Multi-Mode, FC-155-55E
mode, Single-Fiber Bi-Directional single-mode,
version can span up two kilometers over standard
Extended Reach multi-mode and versions
multi-mode fiber.
launching ITU specified CWDM transmitter
With Extended Reach versions,
users on maximum length fiber segments can gain full advantage of the transmission rate and capacity of Fibre Channel links!
Illustrated:
Extended Reach Multi-Mode Converter
wavelengths
ORDERING INFORMATION Model Numbers
Media Types
Min. Tx PWR
Max. Tx PWR
Rx Sensitivity
Min. PWR Budget
Max. PWR Budget
Max. Input PWR
Connector Type
Wavelengths (ηm)
Transmit Distance
FC converters with standard multi-mode fiber port connectors are designated by ( FC-155-XX) or (FC-156XX) and have similar power and sensitivity specifications FC-155-55 **
MM / MM
-9.5 dBm
-4.0 dBm
-17.0 dBm
7.5 dB
13.0 dB
0.0 dBm
SC/SC
850 ηm
220/550 m ea.
FC-156-56 **
MM / MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
7.0 dB
13.0 dB
0.0 dBm
LC/LC
850 ηm
220/550 m ea.
FC-155-55E
MM / MM
-10.5 dBm
-3.5 dBm
-19.5 dBm
9.0 dB
16.0 dB
-3.0 dBm
SC/SC
1310 ηm
550m / 2 K m
Specifications below for single-mode fiber connectors FC-131-31 **
SM / SM
-10.0 dBm
-3.0 dBm
-20.0 dBm
10.0 dB
17.0 dB
-3.0 dBm
SC/SC
1310 ηm
10Km each
FC-155-31
MM / SM
-10.0 dBm
-3.0 dBm
-20.0 dBm
10.0 dB
17.0 dB
-3.0 dBm
SC/SC
1310 ηm
550m / 10 Km
FC-156-36
MM / SM
-10.0 dBm
-3.0 dBm
-20.0 dBm
10.0 dB
17.0 dB
-3.0 dBm
LC/LC
1310 ηm
550m / 10 Km
FC-155-31E33
MM / SM
-5.0 dBm
0.0 dBm
-24.0 dBm
19.0 dB
24.0 dB
-3.0 dBm
SC/SC
1310 ηm
550m / 30 Km
FC-155-31E45
MM / SM
-5.0 dBm
0.0 dBm
-24.0 dBm
19.0 dB
24.0 dB
-3.0 dBm
SC/SC
1550 ηm
550m / 40 Km
FC-155-31E75
MM / SM
-2.0 dBm
3.0 dBm
-24.0 dBm
22.0 dB
27.0 dB
-3.0 dBm
SC/SC
1550 ηm
550m / 70 Km
** Reference optical specifications for standard multi-mode or single-mode fiber port connectors. Other table specifications for alternate (second) fiber port connector. * NOTE: Most versions of FC-1XX-XX standalone converters are available as card modules for Canary’s CCM-1600 and CCN-2000 / CCN-0400 Chassis models. Please refer to the CCM-1600 and CCN-20000 / CCN-0400 Data Sheets for more information. More versions of the FC-155-XX series may be found on the Canary web site as they become available.
Fibre Channel, Single-Fiber Bi-Directional, Media Converters • FC-155-37A and FC-155-37B Multi-mode to Single-Fiber, Bi-Directional Single-Mode • FC-131-37A & FC-131-37B Single-mode to Single-Fiber, Bi-Directional Single-mode Canary’s Fiber Channel FC-155-37A/B multi-mode to
Single-Fiber,
transport
1.0625
Bi-Directional Gigabaud
converters
(Gigabit)
data-rate
Features include: • Supports 1.0625 Gigabaud (Gigabit) data rate
multi-mode
•
Diagnostic LEDs
ports, across the enterprise via a single strand
•
Simple plug and go installation
of
•
Transparent to Flow-Control commands
traffic,
originating
single-mode
at
fiber
low-cost
cable.
FC-155-37A/B fiber
•
Optional: UK, Continental European power
capacity by using dual wavelengths transmitted
•
Auto-sensing, 110 / 230 VAC Power Supply
bi-directionally
•
converters
duplex
are
fiber
designed over
pair.
a
They
to
free-up
single are
strand
ideal
of
for
a
Dual power jacks for connecting optional, redundant power supply
data
intensive backbones in the enterprise or across the campus where extra fiber capacity is lacking but additional access is needed for redundancy, to add channels, or for alternate protocols. Canary’s Single-Fiber, Bi-Directional converters
Canary
are
available with 10 kilometer or 20
functionally
identical
to
standard
units
with the exception that units designated with an A transmit at 1550 ηm and receive on 1310 ηm, while B units transmit at 1310 ηm and receive on 1550
ηm.
Single-Fiber
converters
must
be
connected as complementary A & B pairs (one of each).
Similarly, standalone A & B units can be
connected to complementary A & B modules used in the CCN-2000/0400 or CCM-1600 Chassis families.
Illustrated:
Single-Fiber, Bi-Directional Media Converter
Single-Fiber
converters
are
kilometer transmission ranges. Standard FC multi-mode ports provide minimum
transmission
distances
of
220+ meters over 62.5/125 µm fiber or
500+
fiber.
meters
over
50.0/125
µm
ORDERING INFORMATION Model Numbers
Media Types
Min. Tx PWR
Max. Tx PWR
Rx Sensitivity
Min. PWR Budget
Max. PWR Budget
Max. Input PWR
Connector Type
Wavelengths (ηm)
Transmit Distance
FC converters with standard multi-mode fiber port connectors are designated by ( FC-155-XX) or (FC-156-XX) and have common power and sensitivity specifications Standard single--mode fiber port connectors are designated by (-31-) e.g. (FC-1XX-31) or (FC-131-XX) with Output PWR: ( -10, -3 dBm) and Sensitivity: ( -20 dBm) FC-155-55 **
MM / MM
-9.5 dBm
-4.0 dBm
-17.0 dBm
7.5 dB
13.0 dB
0.0 dBm
SC/SC
850 ηm
220/550 m ea.
Specifications below for single-mode fiber connectors FC-131-31 **
SM / SM
-10.0 dBm
-3.0 dBm
-20.0 dBm
10.0 dB
17.0 dB
-3.0 dBm
SC/SC
1310 ηm
10Km each
FC-155-37A
MM / SM
-8.0 dBm
-3.0 dBm
-21.0 dBm
13.0 dB
18.0 dB
-3.0 dBm
SC/SC
1550/1310
550m / 20 Km
FC-155-37B
MM / SM
-8.0 dBm
-3.0 dBm
-21.0 dBm
13.0 dB
18.0 dB
-3.0 dBm
SC/SC
1310/1550
550m / 20 Km
FC-155-37E4A
MM / SM
-3.0 dBm
2.0 dBm
-23.0 dBm
20.0 dB
25.0 dB
-3.0 dBm
SC/SC
1550/1310
550m / 40 Km
FC-155-37E4B
MM / SM
-3.0 dBm
2.0 dBm
-23.0 dBm
20.0 dB
25.0 dB
-3.0 dBm
SC/SC
1310/1550
550m / 40 Km
FC-131-37A
SM / SM
-8.0 dBm
-3.0 dBm
-21.0 dBm
13.0 dB
18.0 dB
-3.0 dBm
SC/SC
1550/1310
10 Km / 20 Km
FC-131-37B
SM / SM
-3.0 dBm
2.0 dBm
-23.0 dBm
20.0 dB
25.0 dB
-3.0 dBm
SC/SC
1310/1550
10 Km / 20 Km
** Reference optical specifications for standard multi-mode or single-mode fiber port connectors. Other table specifications for alternate (second) fiber port connector. * NOTE: FC-155-37X / FC1-55-37E4X standalone converters are available as card modules for Canary’s CCM-1600 and CCN-2000 / CCN-0400 Chassis models. Please refer to the CCM-1600 and CCN-20000 / CCN-0400 Data Sheets for more information. More versions of the FC-155-37A/B series may be found on the Canary web site as they become available.
Fibre Channel CWDM Fiber-to-Fiber Media Converters
• FC-155W-XX - Multi-mode to Single-mode with ITU / CWDM specified wavelengths Canary’s
Fibre
Channel,
FC-155W-XX
series
of
Coarse Wavelength Division Multiplexing (CWDM) converters provide an economical way to convert
Features include: •
Supports 1.0625 Gigabaud (Gigabit) data rate
•
Diagnostic LEDs
•
Simple plug and go installation
•
Transparent to Flow-Control commands
CWDM based networks.
•
Optional: UK, Continental European power
Coarse Wavelength Division Multiplexing reduces
•
Auto-sensing, 110 / 230 VAC Power Supply
•
Dual power jacks for connecting optional,
multi-mode 1.0625 Gigabaud (Gigabit) data-rate traffic for launch and transport through CWDM Multiplexers and provide access to high capacity
network congestion with a minimum infrastructure investment. channel),
Using discrete wavelengths (one per multiple
data
channels
can
be
redundant power supply • Optional 40+ or 60+ Kilometer transceivers
transported in parallel over a single-mode fiber cable.
CWDM enables Fibre Channel traffic to
co-exist with Gigabit Ethernet and Fast Ethernet traffic while being transported together across the network.
FC-155W-XX CWDM converters are designed to meet
CWDM converters are functionally
industry needs for an economical way to access
identical to standard units with
CWDM
the
point-to-point
networks. Frame
campus
and
metro-ring
They are used with Main Distribution
(central
multiplexers
office)
and
Multiplexer
/
De-
must
models
be
units
a
fiber
with
at link
identical
Add/Drop Multiplexers (OADMs), to insert and/or
a common channel link e.g. if one
drop
device is operating at 1470 ηm,
segments.
from
site,
of
wavelengths in order to maintain
traffic
remote
that
ends
Optical
optical
with
exception
opposite
single-mode
fiber
Specific models provide transmission
on one of eighteen discrete λs, each a unique, ITU
specified,
available Kilometer multi-mode
for
CWDM
wavelength.
either
transmission ports
40+
Versions
kilometer
distances.
provide
minimum
or
second
must
transmit
and
receive on the same wavelength.
are
Similarly, a standalone 1470 ηm
60+
unit can be connected to a CCM-
FC-155W-XX transmission
distances of 220+ meters over 62.5/125 µm fiber or 500+ meters over 50.0/125 µm fiber.
the
1600
or
chassis
CCN-2000 module
wavelength.
with
/
CCN-0400 the
same
ORDERING INFORMATION Model Numbers
Media Types
Min. Tx PWR
Max. Tx PWR
Rx Sensitivity
Min. PWR Budget
Max. PWR Budget
Max. Input PWR
Connector Type
Wavelengths (ηm)
Transmit Distance
FC converters with standard multi-mode fiber port connectors are designated by ( FC-155-XX) or (FC-156-XX) and have common power and sensitivity specifications FC1-55-55 **
MM / MM
-9.5 dBm
-4.0 dBm
-17.0 dBm
7.5 dB
13.0 dB
0.0 dBm
SC/SC
850 ηm
220/550 m ea.
Specifications below for single-mode CWDM fiber connectors FC-155W-XX *
MM / SM
-5.0 dBm
0.0 dBm
-22.0 dBm
17.0 dB
22.0 dB
-3.0 dBm
SC/SC
CWDM
550m / 40 Km
FC-155W-XXE6
MM / SM
0.0 dBm
5.0 dBm
-24.0 dBm
24.0 dB
29.0 dB
-3.0 dBm
SC/SC
CWDM
550m / 60 Km
FC-155W-XXE8
MM / SM
dBm
dBm
dBm
dB
dB
dBm
SC/SC
CWDM
550m / 80 Km
** Reference optical specifications for standard multi-mode or single-mode fiber port connectors. Other table specifications for alternate (second) fiber port connector. * NOTE 1: W-XX designates one of eighteen CWDM optical transmission wavelengths (λ) e.g. FC-155W-47 = 1470 ηm or FC-155W-61 = 1610 ηm transmission. Please refer to the CWDM (Coarse Wavelength Division Multiplexing Section for more information. * NOTE 2: FC-155W-XX CWDM converters are available as card modules for the CCM-1600 and SNMP manageable CCN-2000 / CCN-0400 Chassis models. Please refer to the CCM-1600 and CCN-20000 / CCN-0400 Data Sheets for more information. Please refer to the Standalone / Rackable CWDM data pages for information on Passive Optical Multiplexer / De-Multiplexers and OADMs. There are eighteen CWDM wavelengths (λs) specified. Eight standard wavelengths plus four O-band λs are useable over most standard single-mode fiber. Canary offers products for the standard eight wavelengths plus four O-band λs: 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610 ηm + 1290, 1310, 1330, 1350 More versions of the FC-155W-XX series may be found on the Canary web site as they become available.
ηm