ITS-P-08019FH_2 (Page 1 of 9)
FH41 Series 0.5 mm Pitch, High Speed Transmission FFC Connector Supports next gen. chip V-by-One ® HS* by THine
ighhlyly pt h g s i d eeeds h conncceept c c e u n SSuccn deessigign croies!!!! ovveen d 28SSeeries r p o pr ofFFHH28 of
*High speed serial interface technology for picture transmission
Features 1. Accepts impedance matched shielded FFC with ground contacts 2. Differential impedance 100 Ω ± 10 % (1 Gbps+) 3. Firm & clear tactile click to confirm lock completion 4. Robust lock structure 5. FFC tabs allow high connection reliability 6. Utilizes same FFC as vertical FH48 7. Visible SMT leads for visual check 8. RoHS Compliant, Halogen-free Product* *This product satisfies halogen free requirements defined as 900 ppm maximum chlorine, 900 ppm maximum bromine, and 1500 ppm maximum total of chlorine and bromine. Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Mar. 30, 2011
ITS-P-08019FH_2 (Page 2 of 9)
Dimensions Dimensions: 68 pos. Front Flip Actuator
2.5 mm
38
Ground Contact 2.5 mm pitch
mm
Signal Contact 0.5 mm pitch
Ground contacts are placed every 5 signal pins.
6.2 mm (Mounting Area) FFC: t (Signal Contact Area) = 0.3 mm ± 0.05 t (Grounding Plate) = 0.5 mm ± 0.05 Bottom Contact
Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings, or availabilities.
2.5 m
mP itch
Issued: Mar. 30, 2011
ITS-P-08019FH_2 (Page 3 of 9)
High Speed Transmission Capability Impedance Matched Shielded FFC Impedance Matched Shielded FFC Differential Impedance: 100 Ω ± 10 % Contact area for signal
FFC Contact area for grounding
Signal GND Contacts Only for Grounding Connected to Shielded FFC for Impedance Matching Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings, or availabilities.
Impedance Controlled Contact Design Differential Impedance: 100 Ω ± 10 % Issued: Mar. 30, 2011
ITS-P-08019FH_2 (Page 4 of 9)
Robust Lock Structure Succeedshighly highly Succeeds provendesign designconcept concept proven ofFH28 FH28Series!! Series!! of
Metal fitting firmly supports rotating actuator from below
Strong thick actuator
Each contact tip hooks down the actuator from above
Actuator does not come off, even under rough operation! Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Mar. 30, 2011
ITS-P-08019FH_2 (Page 5 of 9)
High Operational Reliability Wide FFC Entry
Confirmed Locking
110˚ wide actuator opening makes FFC insertion easier.
The firm & clear tactile click verifies lock completion
Side-Catches hold the tabbed FFC in place, which enables… - Stable FFC temporary holding - Easy and accurate FFC guided positioning - Consistent connection quality with all operators - High FFC retention force
FFC tabs FFC
47 N
FFC
(Horizontal direction, 68 pos.)
Stable & Reliable Connection Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Mar. 30, 2011
ITS-P-08019FH_2 (Page 6 of 9)
Compatible FFC with FH48 FH41 Horizontal type 0.5 mm pitch 2.5 mm grounding pitch 2.5 mm height
0.3 mm thick tabbed FFC Common FFC for FH41 and FH48
FH48 Vertical type
Enables the mixed use of FH41 and FH48 for customer’s convenience.
0.5 mm pitch 2.5 mm grounding pitch 6.18 mm height *PCB layout is not compatible with FH48. Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Mar. 30, 2011
ITS-P-08019FH_2 (Page 7 of 9)
Visible SMT Lead for Visual Check The solder joints can be visually checked from above. Visual VisualCheck Check from Above from Above
0.25 mm
0.5 mm
5.45 mm
Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Mar. 30, 2011
ITS-P-08019FH_2 (Page 8 of 9)
Application Examples Car Navigation, Car audio
Game Machine
LCD, LCD TV PDP, Digital TV
Notebook PC
Medical Equipment
Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings, or availabilities.
DVD Player / Recorder
Issued: Mar. 30, 2011
PPC, MFP
ITS-P-08019FH_2 (Page 9 of 9)
Specifications • Material and Finish Component
Material
Finish & Remarks
Housing
LCP*
Gray / UL94V-0
Actuator
LCP*
Black / UL94V-0
Signal Contacts
Phosphor Bronze
Contact area: Gold plated Others: Nickel plated
GND Contacts
Phosphor Bronze
Tin plated over Nickel under plating
Metal Fitting
Phosphor Bronze
Tin plated over Copper under plating
• Performance Characteristics Contact Resistance**
100 mΩ MAX.
Withstanding Voltage
AC 150 V for 1 minute
Insulation Resistance
500 MΩ MIN. (DC 100 V)
Rated Current
0.5 A
Rated Voltage
AC / DC 50V
• Applicable FFC thickness required at mating area: 0.3 ± 0.05 mm • Varieties: 28, 30, 31, 40, 50 and 68 pos. (Sample availability: 21, 24 and 51 pos.) • RoHS compliant, Halogen-free product (Consult cable manufactures about halogen-free FFC.) *NOTE: This product satisfies halogen free requirements defined as 900 ppm maximum chlorine, 900 ppm maximum bromine, and 1500 ppm maximum total of chlorine and bromine. ** includes FFC conductor resistance (L = 8 mm) Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Mar. 30, 2011
Appendix 1
ITS-P-08019FH_2 (Page 10)
Automatic Mounting ♦ Recommended Vacuum Pick Up Area Pick & Place Nozzle Level Surface
Side view
Actuator GND contact Signal contact
Housing
Metal Fitting
38 (36) (1.64)
Vacuum Pick Up Area
Top view Core-outs are provided on the actuator, depending on the contact position.
Dimension Example: 68 positions, Weight: 0.57 grams (All dimensions in millimeters) Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Mar. 30, 2011
Appendix 2
ITS-P-08019FH_2 (Page 11)
Recommended PCB Layout Dimension Example: 68 positions, Recommended stencil thickness: 0.1 mm
(All dimensions in millimeters) Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Mar. 30, 2011
Appendix 3
ITS-P-08019FH_2 (Page 12)
Recommended FFC Layout ♦Dimension Example: 50 pos.
Contact area at grounding plate: Tin plating
Contact area of signal contact: Gold plating
(All dimensions in millimeters) Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Mar. 30, 2011
Appendix 4
ITS-P-08019FH_2 (Page 13)
FFC Material Configuration Examples This specifies the recommended FFC configuration mating area. The applicable FFC mating area thickness: Contact area for signal = 0.3 mm ± 0.05 Contact area for grounding = 0.5 mm ± 0.05 Single-sided Shielded area
Ground plate
Shielded area
Layer Shielding Material Conductive Adhesive Copper Foil (Tin plating) Adhesive Base Film Adhesive Insulator Layer Adhesive Soft Copper Foil (Nickel Under Plating / Gold Plating) Adhesive Insulator Layer Adhesive Stiffener
Total Thickness at Ground Plate (µm)
Material Polyester Type Acrylic Type Polyester Type Acrylic Type Polyester Type Polyester Type
70 24 12 24 25 35 35
35
Polyester Type Polyester Type Polyester Type Polyester Type
35 25 30 188
Total
503
35 25 30 188 313
1. This configuration example is for reference. 2. Please consult FFC suppliers for configuration details.
Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings, or availabilities.
Total Thickness at Conductor End (µm)
Issued: Mar. 30, 2011
ITS-P-08019FH_2 (Page 14)
High Speed Transmission Characteristics - Differential Impedance - Eye Diagram - EMI Characteristics
Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Mar. 30, 2011
ITS-P-08019FH_2 (Page 15)
High Speed Transmission Characteristics Differential Impedance 130
Rise time (Tr: 10 % - 90 %): 175 ps, 233 ps, 350 ps, 700 ps (Ω)
Tr
175 [ps]
233 [ps]
350 [ps]
700 [ps]
FH28-Normal FFC
81
86
93
99
FH41 HS FFC*
92.8
95.5
96.1
96.6
FH48 HS FFC*
90.8
93.3
95.2
110
90
FH41 Series
Connector
70
110
*Manufactured by Hitachi Cable.
52.5
52.7
52.9
53.1
53.3
53.5
Time [ns]
175[ps] 233[ps] 350[ps] 700[ps]
130
FH48 Series 120 110 Impedance[Ω] [Ω] Impedance
Impedance [Ω] Impedance [Ω]
120
175[ps] 233[ps] 350[ps] 700[ps]
PCB
80
95.6
175[ps] 233[ps] 350[ps] 700[ps]
FFC
100
*Manufactured by Hitachi Cable. 130
FH28 Series
120 Impedance [Ω]
Input signal
Offset voltage: S+ 200 mV, S- 200 mV
FFC
100
FFC
100
PCB 90
Connector 80
PCB 90
Connector 80
70 50.0
50.5
51.0
51.5
52.0
Time [ns] Time[ns]
Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings, or availabilities.
70 50.0
50.5
51.0
Time Time[ns][ns]
Issued: Mar. 30, 2011
51.5
52.0
ITS-P-08019FH_2 (Page 16)
High Speed Transmission Characteristics Eye Diagram -FH28 and FH41FH28 - Normal FFC (80 mm)
FH41- High Speed FFC (80 mm)
1 Gbps
2 Gbps
3 Gbps
4 Gbps
Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Mar. 30, 2011
ITS-P-08019FH_2 (Page 17)
High Speed Transmission Characteristics Eye Diagram -FH41 and FH48FH41 - High Speed FFC (500 mm)
FH48- High Speed FFC (500 mm)
1 Gbps
2 Gbps
3 Gbps
3.75 Gbps
Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Mar. 30, 2011
ITS-P-08019FH_2 (Page 18)
EMI Characteristics
Magnetic Near-Field Measurement Method FH41 / FH48 – High Speed FFC
FH28 - Normal FFC Measured area
EMI Map
EMI Map
Measured area
Drastic reduction of Noise Frequency :3 GHz
Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Mar. 30, 2011
