Eye Ball type Camera (osd controller in the case) Owner’s Manual

CDC3611IRVA

Caution / Feature / Warning Main Part Installation Drawing OSD Guide Specification

Page 03-05 Page 07-08 Page 09-10 Page 12-12 Page 13-30 Page 30-31

Contents 3 4 5 6 7 9 11 12 13 13 14 15 15 17 19 19 20 20 20 21 21 21 22 22 23 23 23 23 24 24 24 25 25 27 27 27 28 28 28 29 29 29 30 31

Caution Features Warning Components Main Parts Installation Connection Drawing Camera Operation Menu Setting EXPOSURE LENS BACKLIGHT AGC SENSE_UP 3D_DNR RGB WB MODE RED GAIN BLUE GAIN COLOR MODE DAY&NIGHT D&N MODE NIGHT C NIGHT A FUNCTION MIRROR SHARPNESS GAMMA SLC NIGHT UP MOTION PRIVACY SET TITLE DPC MONITOR LANGUAGE OSD COLOR COMMUNICATION FACTORY SET Camera power consumption Specification

1

2

Features We thank you very much for taking our camera. First of all, please read this instruction manual carefully before use in order to avoid any mistake and to use your camera with right manner.

CAUTION To reduce the risk of electric shock, Do not remove cover ( or Back), No user serviceable parts inside. Refer servicing to qualified service personnel.

The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. INFORMATION- This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. WARNING- Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. WARNING- To prevent electric shock and risk of fire hazards: 1) Do NOT use power sources other than that specified. 2) Do NOT expose this appliance to rain or moisture.

Super Natural High Resolution

Digital Slow Shutter (SENSE-UP)

Using a 410,000 pixel Sony Super HAD II CCD produces clear image with a horizontal resolution of 620TV Lines for Color and 670TV Lines for B/W. You'll get a more vivid and clearer natural color image.

Digital Slow Shutter technology is the primary technology we offered for the better images at night. (Up to x 1024)

Digital Wide Dynamic Range (D-WDR)

The sub monitor function enables easy adjustment of the camera angle within the monitoring range during its installation.

Sub Monitor Function

Digital Wide Dynamic Range technology helps to capture perfect images in both bright and dark environments simultaneously. Without using Sony Double Scan CCD, the true WDR performance is displayed.

Smart IR LED Compensates the area that is saturated due to bright light.

Excellent Sensitivity High Light Masking (HME) Adopting a Diagonal 6mm (1/3"), highly sensitive CCD and digital signal processing technology, it can clearly distinguish the outline and color of a subject in an extremely low luminance environment – even.

Masks overly exposed light to produce a true video image of any environment. OSD

Smart 3D-DNR

The camera control is convenient by using different foreign language O.S.D. Also the camera can be controlled by selecting text displayed on the monitor screen.

The DNR function is the technology to eliminate noise for providing a distinct and clear image. The 2D filter reducing noise in the brightness of image and 3D Filter reducing noise caused by movement. When movement appears, Smart DNR works to adjust lagging, and it is automatically comes back ON if there is no more movement at a scene.

Additional Functions SYNC(INT/LL), SENS-UP, FREEZE, FLIP(H/V-REV), D-ZOOM, SHARPNESS, MOTION DETECTION and PRIVACY Communication(RS485) functions are provided.

Smart BLC Conventional cameras always have fixed BLC zones. BLC-SMART means that the camera automatically changes the BLC zone in various conditions. True Day & Night

This installation should be make by a qualified service person and should conform to all local codes.

3

Masks overly exposed light to produce a true video image of any environment.

4

Warning

Components

1) Do not install the camera in extreme temperature condition. Only use the camera under conditions where temperatures are between -10 ºC and +50 ºC (if heater have it can operate at : -45 ºC and +50 ºC) Be especially careful to provide ventilation when operating under high temperatures.

2) Do not install or use the camera in a environment where the humidity is high.

1) Dome Camera

It can cause the image quality to be poor.

3) Do not install or use the camera under unstable lighting conditions. Severe lighting change or flicker can cause the camera to work improperly.

4) Do not touch the front lens of the camera. This is one of the most important parts of the camera. Be careful not to leave fingerprints on the lens cover.

2) Cable for Extra Video

5) Do not drop the camera or protect it from physical shocks. It can cause malfunctions to occur.

6) Never keep the camera pointed directly at strong light. It can damage the CCD.

7) Do not expose the camera to radioactivity.

2) Focus-Driver / L-wrench

If exposed to radioactivity the CCD will fail.

8) The camera requires periodic inspection. Contact an authorised technician to carry out the inspection.

9) Stop using your camera when you find it malfunctioning.

3) Screw for Installation

If the camera emits smoke or is unusually hot for a long period, a fire may be caused.

10) Do not Install the camera on a surface that can not support it. If the camera is installed on an inappropriate surface, it may fall and cause injury.

4) Manual

11) Do not hold plug with wet hands. It could cause an electric shock.

12) Do not dis-assemble the camera. It may result in an electric shock or other hazards.

5) Mounting Template

13) Do not use the camera close to a gas or oil leak. It may result in a fire or other hazards.

5

6

Main Part 1) Upper Ball and Down Ball The ball can be adjust by 3 Axis , it can easy be install to anyplace. Like wall or ceiling. Also you can adjust the focus and zoom on the upper ball part by the focus-driver .

Focus adjustable

Zoom adjustable

2) OSD Board We use the joystick osd board for easily

Extra Video Connector

controlled by OSD menu.

} SET : Press the joystick button , the

MAIN MENU appears. This button can be used to confirm settings after changing the value of the selected function or current conditions.

} Left / Right and UP / Down : left and Right : Used when changing item values, by moving the cursor to the left or right on the menu screen. Up and Down : Used for selecting items by moving the cursor up and down on the menu screen.

OSD Board

3) TDN Lens (True Day & Night ) Normal used 2.8~12mm varifocal DC Auto Iris TDN Lens. 4) IR LED Board By the model name we supply 2 type ir led board. One is 42 ir led board , the others is 24 ir led Board with 4heaters. Of course , if you select the camera without ir, It means this part no have. 42 IR Led Board 5) Cover After finished Adjust, we need fix the ball by using the cover.

24 IR Led Heater Board

6) Base When you plan to install the camera, please fix this base first. 7) AC24V/DC12V Dual Power Board When you select the ac type camera, built in the Dual power sported board . 12V DC input it is ok. and 24V AC also ok.

7

8

Installation

Installation Installation Step 1) Make the hole

2) Fixed the base

1. Make the screw hole and cable hole by the mounting template. 2. Fix the Base Housing to the desired place with screws supplied. 3. Power Connect & Monitor Impedance. Made sure which power supply that you selected before you use. - DC12V regulated power supply (DC12V camera only),Make Sure "+" / "-" . Dual power supply (AC24V/DC12V both can be used) - To avoid fire or shock hazard, must use a UL listed power supply. - Set the monitor impedance switch to 75½. Check the impedance switch when the screen turns blurred.

Terminal jack : Power-in BNC : Video-out 4. Fix the ball by using the cover, and then adjust desired scene by turning and moving the ball, stopper Ring by turning it with hands. after it you can fix the screw with the L wrench.

3) Fixed the ball

OSD - Cover

5. Focus and Functions Adjust - Open the osd - cover , and connect the power , and use the extra cable to adjust the focus and others functions . After finished, please tighten the osd - cover carefully.

To test-monitor

Adjust the focus level

OSD controller

Adjust the zoom level

4) Fixed the ball Note : 1) Before you fix the osd-cover, please make sure the rubber on the osd-cover part fixed very well. 2) Before power connect, please make sure which power-type camera you buy, and select the right adaptor to supply the power.

5) Fixed the screw

9

10

Connection

Drawing (mm)

1) Connection to Monitor and Power 1) BNC : Video output

VIDEO

2) Power Jack

Adaptor

- As the connecting method varies with the instruments, refer to the manual supplied with the instrument. - If necessary, you can connect the monitor to the REMOTE jack on the back of your camera. - Only connect the cable when the power is turned off. - Set the 75Ω / Hi-Z selection switch as shown below if you have an intermediate device. VIDEO

VIDEO

Option Bracket (F13C80)

VIDEO

75Ω

Hi-Z

75Ω

Hi-Z

IN

OUT

IN

OUT

2) Connection to Power Connect the adaptor to the power input connector as shown in the figure below. The Standard voltage for camera operation : AC : DC 12V ± 10%, AC 24V±10% ; DC : DC 12V ± 10% AC (Dual type) camera series Power Jack 24VAC/12VDC input DC camera series Power Jack 12VDC input only

Note Before connect the power jack , please really have a check the power supply.

11

12

■ Camera Operation

Camera Operation ■ ■ Setting

■ Menu 1. EXPOSURE

2. RGB

3. DAY&NIGHT

LENS

WB MODE

D&N MODE

BACKLIGHT

RED GAIN

NIGHT C

AGC

BLUE GAIN

NIGHT A

SENSE_UP

COLOR MODE

6. PRIVACY

3D_DNR

5. MOTION

MASK 1

AREA SET

MASK 2

4. FUNCTION

SENSITI

MASK 3

MIRROR

SHOW INDI

MASK 4

SHARPNESS

EXTER OUT

MASK 5

GAMMA

MASK 6

SLC

MASK 7

NIGHT UP

MASK 8

Settings can be made by using the OSD controller that fixed on the camera. If joystick osd use , please press it for start the osd menu setting, and if we use the 5buttons osd board, and then please press the Set button. Extra Video Connector Joystick Switch

EXPO

7. SET

8. EXIT

TITLE

SAVE & EXIT

DPC

EXIT

RGB

LENS

D & N FUNC

BACKL I GHT AGC SENSE-UP 3D DNR EX I T JUMP

MOT I

PRIY

SET

EXIT

MANUAL OFF OFF X4 SMART

MONITOR LANGUAGE

MANUAL: Select when fixed lens is used

OSD COLOR COMMUNICA FACTORY SET 13

14

■ Camera Operation

Camera Operation ■ b) DC/VIDEO : Auto Iris Lens selection > The DC LEVEL & Shutter level can be adjustment.

■ EXPOSURE EXPOSURE Selected EXPOSURE by using the Left/Right,Up/Down buttons so that the arrow indicates EXPOSURE. 1) Lens

EXPO

On the Lens menu you can use DC or VIDEO or MANUAL Lens. When you set DC, a submenu appears where you can set the brightness of the picture.

RGB

D & N FUNC

MOT I

PRIY

LENS

EXPO

RGB

D & N FUNC

MOT I

PRIY

LENS

a) MANUAL : Manual Lens selection. > The ELC LEVEL & Shutter level can be adjustment.

SET

EXIT

EXIT

DC OFF OFF X4 SMART

BACKL I GHT AGC SENSE-UP 3D DNR EX I T JUMP

MANUAL OFF OFF X4 SMART

BACKL I GHT AGC SENSE-UP 3D DNR EX I T JUMP

SET

LENS DC

0 27 AUTO

ELC LEVEL E . SHUTTER RETURN

FOCUS TARGET

FOCUS TARGET

15

0 27 DC–AUTO

DC LEVEL E . SHUTTER RETURN

LENS MANUAL

[

0000

]

16

[

0000

]

■ Camera Operation

Camera Operation ■ - BLC MODE : MANUAL & SMART MODE

■ EXPOSURE EXPOSURE > BLC EXPOSURE by using the Left/Right,Up/Down buttons so that the arrow indicates EXPOSURE. 2) BLC (BACK LIGHT COMPENSATION) When there is a strong backlight behind the object, clear images of the background as well as the object can still be obtained by using the BACKLIGHT function. This function is to deliver a distinctive subject and background at the same time, even when t he subject is in backlight, unlike conventioned cameras.

EXPO

RGB

D & N FUNC

MOT I

PRIY

LENS BACK LIGHT AGC SENSE-UP 3D DNR EX I T JUMP

SET

► SMART : Conventional cameras always have fixed BLC zones. BLC-SMART means that the camera automatically changes the BLC zone in various conditions. ► HME : Masks overly exposed light to produce a true video image of any environment. ► D-WDR : By D-WDR image processing techniques of input image, information of input image brightness value is analyzed, that part of relatively bright and dark BACK LIGHT- BLC images is judged and through different BLC MODE SMART SET LEVEL MID Brightness value mapping RETURN will have the effect of improving the contrast ratio.

EXIT

MANUAL OFF OFF X4 SMART

BAC K LIGH T - HME

HME BLC SET MASK1 MASK2 MASK3 MASK4 MODE SET LEVEL RETURN

ON ON ON ON ALL DAY 050

BLC : Enables a user to directly select a desired area from a picture, and to view the area more clearly. BACK LIGHT- D. WDR SET LEVEL RETURN

BLC ON

BLC OFF 17

18

010

■ Camera Operation

Camera Operation ■ 5) 3D-DNR (3D Filter reducing noise caused by movement.) Newly developed 3D filtering enhances Digital Noise Reduction at low light levels.

■ EXPOSURE EXPOSURE > AGC EXPOSURE by using the Left/Right,Up/Down buttons so that the arrow indicates EXPOSURE. 3) AGC (AUTO GAIN CONTROL) The higher the gain level, the brighter the screen, but the higher the noise. - HIGHEST : 6dB ~ 52dB. - HIGH : 6dB ~ 42dB. - MIDDLE : 6dB ~ 30dB. - LOW : 6dB ~ 18dB. - OFF : The gain is fixed at 6dB.

EXPO

RGB

D & N FUNC

MOT I

PRIY

SET

► SMART 3D-DNR : With special technology, it produces less noise but more color at night. there is no image lagging. When movement appears, Smart DNR works to adjust lagging, and it is automatically comes back ON if there is no more movement at a scene.

RGB

D & N FUNC

MOT I

PRIY

SET

EXIT

MANUAL OFF OFF X4 SMART

EXIT

MANUAL OFF OFF X4 SMART

LENS BACK LIGHT AGC SENSE-UP 3D DNR EX I T JUMP

EXPO

LENS BACK LIGHT AGC SENSE-UP 3D DNR EX I T JUMP

*** 3D_DNR OFF/LOW/MID/HIGH/SMART SETTING (Adjust NOISE when low light condition)

■ COLOR

4) SENS-UP (X2~X1024) When it is night or dark, the camera automatically detects the light level and maintains a clear picture if this mode is activated.

19

EXPO

RGB

D & N FUNC

LENS BACK LIGHT AGC SENSE-UP 3D DNR EX I T JUMP

MOT I

PRIY

SET

EXIT

MANUAL OFF OFF X4 SMART

1) WB MODE (WHITE BAL. MODE) Please select the WHITE BALANCE function by the condition where you will install. ►ATW (Auto Tracking White Balance) The color temperature is monitored continuously and thereby white balance is automatically set. ►AWC (Auto White Balance Control) To find the optimal luminance level for the current environment, point the camera towards a sheet of white paper and press the Function Setup switch. If the environment changes, readjust it. ►PUSH LOCK This mode only adjust the white balance.

20

COLOR EXPO

RGB

D & N FUNC

MOT I

WB MODE RED GAIN BLUE GAIN COLOR MODE EXIT JUMP

PRIY

SET

EXIT

AWC 128 128 NORMAL

Select AWC/ATW/MANUAL/PUSH LOCK (adjust white balance)

■ Camera Operation

Camera Operation ■

2) RED GAIN ( Adjust RED Gain ) If the color so so on the monitor, we can increase/ decrease the red and blue color values and monitor the color changes of the object.

■ DAY & NIGHT Pictures can be displayed in either color or black and white.

COLOR EXPO

RGB

D & N FUNC

MOT I

PRIY

EXPO

RGB

D & N FUNC

MOT I

PRIY

SET

EXIT

EXIT

AWC 128 128 NORMAL

3) BLUE GAIN ( Adjust BLUE Gain ) we can increase/ decrease the blue color values and monitor the color changes of the object.

RED /BLUE GAIN SETTING (Adjust RED/ BLUE gain)

COLOR EXPO

4) COLOR MODE White balance adjustment, there have NORMAL / COOL / WARM selectable by the outside environment.

RGB

D & N FUNC

MOT I

WB MODE RED GAIN BLUE GAIN COLOR MODE EXIT JUMP

PRIY

SET

EXIT

AWC 128 128 NORMAL

EXPO

RGB

D & N FUNC

MOT I

D&N MODE NIGHT C. NIGHT A. EXIT JUMP

PRIY

SET

EXIT

AUTO 050 050

► AUTO: The camera automatically switches between day and night. - BURST ON/OFF SETTING (Only removing burst signal) - COLOR -> BW SWITCHING TIME SETTING - BW -> COLOR SWITCHING TIME SETTING - SMART IR function ON/OFF - READ TIME SETTING (Adjust filter switching time) - EX-IR external connecting mode : EXT

D & N- AUTO BURST COLOR-> B&W B&W->COLOR SMART IR READ TIME EX–IR INT. RETURN

White balance adjustment NORMAL / COOL / WARM

21

DAY & NIGHT

Select AUTO/COLOR/BW (TDN FUNCTION/COLOR/ BLACK AND WHITE)

RED GAIN SETTING (Adjust RED gain)

COLOR WB MODE RED GAIN BLUE GAIN COLOR MODE EXIT JUMP

SET

AWC 128 128 NORMAL

WB MODE RED GAIN BLUE GAIN COLOR MODE EXIT JUMP

1) D & N MODE Please the right mode that your camera use. - AUTO: The camera automatically switches between day and night. - COLOR: The camera stays in day mode. - B/W: The camera stays in night mode.

22

ON 028 012 ON 003 AUTO

■ Camera Operation

Camera Operation ■

■ DAY & NIGHT 2) NIGHT C. (NIGHT COLOR ) We can change the value of night color suppress setting that you wish. 3) NIGHT A. (NIGHT APERTURE ) We can change the value of night aperture suppress setting that you wish.

DAY & NIGHT EXPO

RGB

D & N FUNC

D&N MODE NIGHT C. NIGHT A. EXIT JUMP

MOT I

DAY & NIGHT PRIY

SET

EXPO

EXIT

AUTO 050 050

RGB

D & N FUNC

MOT I

SET

EXIT

AUTO 050 050

APERTURE SUPPRESS SETTING

EXPO

RGB

D & N FUNC

FUNCTION MOT I

PRIY

MIRROR SHARPNESS GAMMA SLC NIGHT-UP EXIT JUMP

SET

EXPO

EXIT

OFF 015 0.45 OFF OFF

RGB

D & N FUNC

MOT I

MIRROR SHARPNESS GAMMA SLC NIGHT-UP EXIT JUMP

PRIY

SET

EXIT

OFF 015 0.45 OFF OFF

SELECT 0.45/0.6/1.0/MANUAL (Adjust gamma level)

ADJUST SHARPNESS (Image sharpness can be adjusted)

4) SLC (Side Light Compensation) This function can make brighter image of corner of screen.

■ Function 1) MIRROR If you select MIRROR model to ON, the picture will be mirror.

FUNCTION EXPO

RGB

D & N FUNC

PRIY

OFF/MIRROR SELECTABLE

MIRROR ON

23

SLC

FUNCTION MOT I

MIRROR SHARPNESS GAMMA SLC NIGHT-UP EXIT JUMP

MIRROR OFF

3) GAMMA Select the GAMMA value of 0.45 / 0.6 / 1.0 / MANUAL .

FUNCTION PRIY

D&N MODE NIGHT C. NIGHT A. EXIT JUMP

COLOR SUPPRESS SETTING

2) SHARPNESS Please more carefully use this Function for your camera adjust. And don't increase the SHARPNESS lever too high, the picture may become distorted or noise may appear.

SET

EXIT

OFF 015 0.45 OFF OFF

EXPO

RGB

D & N FUNC

MIRROR SHARPNESS GAMMA SLC NIGHT-UP EXIT JUMP

MOT I

PRIY

SET

EXIT

SET LEVEL RETURN

OFF 015 0.45 OFF OFF

015

SLC LEVEL SETTING (corner of screen can be adjusted)

Side Light Compensation (Make brighter image of corner of screen)

24

■ Camera Operation

Camera Operation ■

5) NIGHT - UP This function is very sensitivity adjustment by SET UP. It increases the brightness at the low light condition by raising the set-up level.

2) SENSITIVE (SENSITIVITY LEVEL SETTING) Please adjust sensitivity when using motion detection. As the sensitivity level increases, even the smaller movements are detected.

FUNCTION EXPO

RGB

D & N FUNC

MOT I

PRIY

SET

MIRROR SHARPNESS GAMMA SLC NIGHT-UP EXIT JUMP

EXIT

OFF 015 0.45 OFF OFF

3) SHOW INDI SETTING Motion defected indicator can be selected as OFF / ICON / trace

MOTION EXPO

Sensitivity adjustment by SET UP

RGB

D & N FUNC

MOTION MOT I

AREA SET SENSITIV. SHOW INDI. EXTER OUT EXIT JUMP

PRIY

SET

EXPO

EXIT

RGB

D & N FUNC

AREA SET SENSITIV. SHOW INDI. EXTER OUT EXIT JUMP

020 ICON ON

MOT I

PRIY

SET

EXIT

020 ICON ON

■ MONTION MTOTION The motion detector detects the moving objects in the scene by monitoring changes in brightness level. 1) AREA SET Select the motion area that you wish to observe from the 4 areas in AREA SET mode.

AREA1 SET AREA2 SET AREA3 SET AREA4 SET RETURN

EXPO

RGB

D & N FUNC

AREA SET SENSITIV. SHOW INDI. EXTER OUT EXIT JUMP

MOT I

PRIY

SET

EXIT

020 ICON ON

OFF OFF OFF OFF

MOTION EXPO

First MOTION area ON / OFF

MOTION–AREA1 TOP BOTTOM LEFT RIGHT RETURN

MOTION area selection

RGB

D & N FUNC

AREA SET SENSITIV. SHOW INDI. EXTER OUT EXIT JUMP

MOTION–EXTER OUT MOT I

PRIY

SET

EXIT

DELAY TIME RETURN

020 ICON ON

003

020 055 030 080

Set first MOTION area

25

SHOW INDI SETTING

4) EXTER OUT (Motion external signal output) This function can make the motion pin height or low signal output. DELAY TIME : After sensitive , the alarm signal display on the screen is delayed from 1sec to 15sec.

MOTION–AREA

MOTION

SENSITIVITY LEVEL SETTING

DELAY OUT SETTING (Alarm signal display on the screen is delayed from 1sec to 15sec)

MOTION External output ON / OFF

26

■ Camera Operation

Camera Operation ■

■ PRIVACY PRIVACY : Hide an area so that it is not displayed on the monitor. - MASK1~MASK8 : Up to 8 areas are selectable. - Please select ON mode for the chosen area. - Please adjust the size of the area to be observed by using the LEFT / RIGHT, WIDTH, TOP / BOTTOM, HEIGHT button. - COLOR : Determine area color. - RETURN: Select this to save the PRIVACY menu settings and return to the PRIVACY menu.

2) DPC (Dead Pixel Compensation) - DPC AUTO/OFF SETTING : Dead pixels are automatically removed. - WHITE THR. : Cancelling White defective pixels. - BLACK THR. : Cancelling Black defective pixels. - DPC LEVEL GAIN LEVEL SETTING : Overall level can be adjusted.

EXPO

EXPO

RGB

D & N FUNC

MOT I

PRIY

SET

MASK1 MASK2 MASK3 MASK4 MASK5 MASK6 MASK7 MASK8 EXIT JUMP

EXIT

START POINT MODIFY POSITION COLOR SET RETURN

OFF OFF OFF OFF OFF OFF OFF OFF

L-TOP GRAY

Able to set shape position Able to set in different area

■ SETUP 1) CAM TITLE : If a title is entered, the title appears on the monitor.

MOT I

PRIY

TITLE DPC SET MONITOR LANGUAGE OSD COLOR COMMUNICA. FACTORY SET EXIT JUMP

SET

EXIT

ON OFF MODE 1 ENGLISH BLUE ON NO

150 030 030

WHITE THR. BLACK THR. DPC LEVEL RETURN

DPC AUTO/OFF SETTING

3) Monitor : The settings value of video appropriate to your monitor. 4) Language : Select a preferred language among the supported languages.

SETUP EXPO

USER TITLE SETUP D & N FUNC

D & N FUNC

Mask color setting (Can change the color of hidden part)

RGB

RGB

Able to set in different shapes

SELECT MASK1~8 (Set from 1 to 8 where wish to be hidden )

EXPO

DPC-AUTO

SETUP

PRIVACY–MASK1

PRIVACY

NOTE : If the cursor is moved to CLR and the SET button pressed, all letters are deleted. To edit a letter, change the cursor to the bottom left arrow and press the SET button. Move the cursor over the letter to be edited, move the cursor to the letter to be inserted and then press the SET button.

MOT I

PRIY

TITLE DPC SET MONITOR LANGUAGE OSD COLOR COMMUNICA. FACTORY SET EXIT JUMP

SET

EXIT

ABCDEFGHIJKLMNOPQRS TUVWXYZ0123456789! #$% &’( )*+,-./:;?@[\]^_

ON OFF MODE 1 ENGLISH BLUE ON NO

RGB

D & N FUNC

SETUP MOT I

TITLE DPC SET MONITOR LANGUAGE OSD COLOR COMMUNICA. FACTORY SET EXIT JUMP

PRIY

SET

EXPO

EXIT

RGB

D & N FUNC

MOT I

TITLE DPC SET MONITOR LANGUAGE OSD COLOR COMMUNICA. FACTORY SET EXIT JUMP

ON OFF MODE 1 ENGLISH BLUE ON NO

PRIY

SET

EXIT

ON OFF MODE 1 ENGLISH BLUE ON NO

CLR POS RET

Set TITLE (Select desired characters and area)

TITLE ON/OFF SETTING

27

MONITOR SETTING MODE (MODE1/MODE2 Selectable)

Select Language

28

■ Camera Operation

Camera Operation ■

5) OSD COLOR : You can change the letter color of OSD.

■ EXIT SETUP EXPO

RGB

D & N FUNC

MOT I

PRIY

TITLE DPC SET MONITOR LANGUAGE OSD COLOR COMMUNICA. FACTORY SET EXIT JUMP

SET

EXIT

ON OFF MODE 1 ENGLISH BLUE ON NO

1) SAVE & EXIT : Exit the osd menu after saving current setting. 4) EXIT : Exit the osd menu without saving the current setting.

EXIT EXPO

OSD color adjustment

RGB

EXIT D & N FUNC

MOT I

PRIY

SET

EXPO

EXIT

SAVE & EXIT EXIT

RGB

D & N FUNC

MOT I

PRIY

SET

EXIT

SAVE & EXIT EXIT

6) Communication : You can control the camera menu by RS485 and please set PELCO-D and baud rate for your communication.

SETUP EXPO

RGB

D & N FUNC

Exit OSD menu after saving current setting.

SETUP-COMMUNI. MOT I

TITLE DPC SET MONITOR LANGUAGE OSD COLOR COMMUNICA. FACTORY SET EXIT JUMP

PRIY

SET

Exit OSD menu.

EXIT

ON OFF MODE 1 ENGLISH BLUE ON NO

PELCO-D 001 9600BPS

PROTOCOL CAMERA ID BAUDRATE RETURN

Set to Communication ID, Speed

Communication ON/OFF

Camera Power Consumption ■ 7) FACTORY SET : The camera setting will go back to factory default.

Power input

42IR LED TYPE

24IR LED TYPE WITH 4HEATER

WITH IR LED TYPE

AC (Min.)

AC24V / DC12V

130mA / 180mA

130mA / 180mA

130mA / 180mA

AC (Max.)

AC24V / DC12V

330mA / 470mA

391mA / 560mA

-

DC (Min.)

DC12V

120mA

120mA

120mA

DC (Max.)

DC12V

350mA

420mA

-

-10 C to + 50 C, Under 90% (Noncondensing)

-45 C to + 50 C, Under 90% (Noncondensing)

-10 C to + 50 C, Under 90% (Noncondensing)

SETUP EXPO

RGB

D & N FUNC

MOT I

TITLE DPC SET MONITOR LANGUAGE OSD COLOR COMMUNICA. FACTORY SET EXIT JUMP

PRIY

SET

EXIT

ON OFF MODE 1 ENGLISH BLUE ON NO

Go back to factory default.

29

Power Consumption

Operating Temp. / Hum.

30

■ Specification TYPE Image Sensor Effective Pixels Scanning System Scanning requency(V)

NTSC

PAL

1/3 SONY Super HAD Ⅱ COLOR CCD 768(H) x 494(V)

752(H) x 582(V),

525 Lines 2:1 Interlace

625 Lines 2:1 Interlace

59.94Hz

50Hz

Resolution (Color)

620 TV Lines

Resolution (B/W)

670 TV Lines

Illumination Shutter Speed

Color 0.1 Lux, B/W 0.01Lux at F1.2 , IR LEDS ON : 0Lux

1/60 ~ 1/100,000 sec.

1/50 ~ 1/100,000 sec.

S/N Ratio

More than 52dB (AGC OFF)

Gamma

0.45

Video Output

VBS 1.0 Vp-p (75 ohm Load)

Sync. System

Internal / External DC / VIDEO / MANUAL

Lens BackLight AGC

OFF / SMART / HME / D-WDR HIGHEST/HIGH/MIDDLE/LOW/OFF X2 - X1024

SENSE-UP 3D_DNR

OFF/LOW/MID/HIGH/SMART

COLOR

AWC/ATW/MANUAL/PUSH LOCK AUTO/COLOR/BW

DAY&NIGHT Function

MIRROR/SHARPPNESS/GAMMA/SLC/NIGHT UP

MOTION

4 areas

PRIVACY

MASK1~MASK8

SET Dimension & Weight

TITLE/DPC/MONITOR/LANGUAGE/OSD COLOR COMMUNICATION/FACTORY SET 120mm x 109mm, About 0.62Kg 31