EXPLOSIONPROOF INSTRUMENT HOUSING
Explosionproof Instrument Housings Adalet Explosionproof Instrument Housings are designed to house electrical systems in hazardous environments.
Multiple Designs Available
EXPLOSIONPROOF
Instrument Housings
XIH Series
XIHL Series
XDH Series
• P recision machined from sand-cast copper-free aluminum • Internal and external ground screws and tamper resistant cover set screw for extra safety • Buna-Nitrile rubber gasket for NEMA Type 4X watertight applications • Corrosion resistant, “safety blue” polyester powder coating(other colors available) • Stainless steel hardware • Front Boss Modifications Available • Solid & glass covers • Double and single ended
194
The ADALET Engineering Department is Available to Assist you in the Selection of Enclosures and Accessories.
EXPLOSIONPROOF INSTRUMENT HOUSING
XIHL
XDHL
XIHM
XDHM
XIHMK
XIH
XDH
XIHS
Size
Large
Large
Medium
Medium
Medium
Standard
Standard
Small
Single
Double
Single
Double
Single
Single
Double
Single
Throat Diameter
4.00”
4.00”
3.56”
3.63”
3.56”
3.19”
3.19”
2.63”
3.31”
3.31”
2.63”
2.63”
2.50”
2.63”
2.63”
1.13”
B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
cUL B,C,D
cUL B,C,D
cUL B,C,D
cUL B,C,D
cUL B,C,D
cUL B,C,D
cUL B,C,D
cUL B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
B,C,D
ATEX/EExd Avail?
Yes - IIC
Yes - IIB+H2
Yes - IIC
Yes - IIC
Yes - IIC
Yes - IIC
Yes - IIC
No
NEMA 4X & IP66
Both
Both
Both
Both
Both
Both
Both
Type 4
Cast Mtg. Feet
Yes
No
Optional
No
Yes
Optional
No
No
Powder Coat Std.
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Backwall Entry
NPT,NPSM,Metric
N/A
NPT
N/A
NPT
Consult Factory
N/A
NPT on XIHSB/D
Front Boss Entry
NPT,NPSM,Metric NPT,NPSM,Metric NPT,NPSM,Metric NPT,NPSM,Metric NPT,NPSM,Metric NPT,NPSM,Metric NPT,NPSM,Metric
Single or Double Sided
Glass Cover Viewing Diameter UL
Canadian
FM
Terminal Strips Thru Dividing Wall Interior Mounting Means
Dividing Wall
Penetrate/Remove
N/A
Yes 2-12
N/A
Yes 2-8
Versatile Thickwall
Versatile Thickwall
Versatile Thickwall
Versatile Thickwall
N/A
Yes
N/A
Yes
4801 West 150th Street, Cleveland, Ohio 44135
N/A
N/A
Versatile Bosses Thickwall N/A
N/A
Yes, Hub
Yes 2-4
N/A
Versatile Thickwall
Bosses
Yes
N/A
TE L 216.267.9000 FAX 216.267.1681
[email protected]
EXPLOSIONPROOF
Basic Catalog #
Instrument Housings
QUICK REFERENCE CHART FOR INSTRUMENT HOUSINGS
195
EXPLOSIONPROOF INSTRUMENT HOUSING
XIH (Standard) SERIES
3-3/16” ID Enclosures XIH housings are designed for small to medium size electronic assemblies. The 3-3⁄16" ID provides ample clearance to accommodate a wide variety of measurement and control devices. Precision machined from sand-cast copper-free aluminum.
STANDARD FEATURES
• Four interior mounting bosses at 45° orientation accommodate blind tapped holes on a 2-1⁄2" bolt circle. Consult factory for other mounting options. • 1⁄2" or 3⁄4" NPT conduit feed-through hubs, offset for maximum clearance and capacity • Internal and external ground screws and tamper resistant cover set screw for extra safety • Glass cover models have a 2-5⁄8" diameter, tempered glass window for local read out • Buna-Nitrile rubber gasket for NEMA Type 4X watertight applications • Corrosion resistant, “safety blue” polyester powder coating (other colors available) • Stainless steel hardware
DESIGN OPTIONS
• 1⁄4-20 UNC holes in front boss for bracket mounting. Consult factory for other sizes.
EXPLOSIONPROOF
Instrument Housings
• Front Boss Modifications: 1⁄2" or 3⁄4" NPT entry for sensor, probe or conduit. NPSM & metric entries also available, consult factory. • Mounting lugs with 5⁄16" holes (add suffix “L” to catalog number) • Other interior mounting bosses available – please consult factory
Certifications
196
Class I, Groups B,C,D
UL 1203
Class II, Groups E,F,G
FM 3615
Class III
CSA C22.2 No. 30.
Class I, Zone 1, AEx d IIC
UL 60079-0/UL 60079-1
Ex d IIC
CSA 60079-0/CSA 60079-1
0539 II 2GD (Optional)
ATEX Directive 94/9/EC
EEx d IIC (Optional)
EN 50014, EN50018 (Optional)
Type 4X
UL 50
IP 66
IEC 60529
4X, 7BCD, 9EFG
NEMA Compliance
The ADALET Engineering Department is Available to Assist you in the Selection of Enclosures and Accessories.
EXPLOSIONPROOF INSTRUMENT HOUSING
XIH (Standard) SERIES 4 1⁄2"
4 1⁄8" 4 13⁄16"
3 1⁄4"
Optional Mounting Lugs (2)
Solid Cover Arrangements
Glass Cover Arrangements 25⁄8"
3 3⁄16"
3 7⁄16"
Catalog Number
GLASS COVER
Description
Catalog Number
Description
XIHFCX2
Flat Cover, 1/2" NPT Hubs
XIHFGCX2
Flat Glass Cover, 1/2" NPT Hubs
XIHFCX3
Flat Cover, 3⁄4" NPT Hubs
XIHFGCX3
Flat Glass Cover, 3⁄4" NPT Hubs
EXPLOSIONPROOF
SOLID COVER
Instrument Housings
2 3⁄16"
2 9 ⁄ 16 "
3 13⁄16"
3 3⁄16"
25⁄8"
4 15⁄16"
4 7⁄16"
5 13⁄16"
3 3 ⁄16"
3 3⁄16"
SOLID COVER
Catalog Number
6"
GLASS COVER
Description
Catalog Number
XIHDCX2
Dome Cover, 1⁄2" NPT Hubs
XIHDGCX2
Dome Glass Cover, 1⁄2" NPT Hubs
XIHDCX3
Dome Cover, 3⁄4" NPT Hubs
XIHDGCX3
Dome Glass Cover, 3⁄4" NPT Hubs
4801 West 150th Street, Cleveland, Ohio 44135
Description
TE L 216.267.9000 FAX 216.267.1681
[email protected]
197
EXPLOSIONPROOF INSTRUMENT HOUSING
XIH 3-LUG
3-3/16” ID Enclosures 3-Lug Mounting
XIH housings are designed for small to medium size electronic assemblies. The 3-3⁄16" ID provides ample clearance to accommodate a wide variety of measurement and control devices. Precision machined from sand-cast copper-free aluminum.
STANDARD FEATURES
• 3 factory drilled mounting lugs • Four interior mounting bosses at 45° orientation accommodate blind tapped holes on a 2-1⁄2" bolt circle. Consult factory for other mounting options. • 1⁄2" conduit feed-through hubs, offset for maximum clearance and capacity • Internal and external ground screws and tamper resistant cover set screw for extra safety • Glass cover models have a 2-5⁄8" diameter, tempered glass window for local read out • Buna-Nitrile rubber gasket for NEMA Type 4X watertight applications • Corrosion resistant, “safety blue” polyester powder coating (other colors available) • Stainless steel hardware
DESIGN OPTIONS EXPLOSIONPROOF
Instrument Housings
• 1⁄4-20 UNC holes in front boss for bracket mounting. Consult factory for other sizes. • Front Boss Modifications: 1⁄2" or 3⁄4" NPT entry for sensor, probe or conduit entry. NPSM & metric entries also available, consult factory. • Other interior mounting bosses available – please consult factory
Certifications
198
Class I, Groups B,C,D
UL 1203
Class II, Groups E,F,G
FM 3615
Class III
CSA C22.2 No. 30.
Class I, Zone 1, AEx d IIC
UL 60079-0/UL 60079-1
Ex d IIC
CSA 60079-0/CSA 60079-1
0539 II 2GD (Optional)
ATEX Directive 94/9/EC
EEx d IIC (Optional)
EN 50014, EN50018 (Optional)
Type 4X
UL 50
IP 66
IEC 60529
4X, 7BCD, 9EFG
NEMA Compliance
The ADALET Engineering Department is Available to Assist you in the Selection of Enclosures and Accessories.
EXPLOSIONPROOF INSTRUMENT HOUSING
XIH 3-LUG 49⁄16"
5 5⁄16"
45⁄8"
1/2-14 NPT (2) PLACES
31⁄4"
Solid Cover Arrangements
Glass Cover Arrangements 25⁄8"
3 3⁄16"
3 3⁄16" 41⁄8"
3 3⁄4"
SOLID COVER
GLASS COVER
Catalog Number
Description
Catalog Number
XIHFCX 2L-3 Lug
Flat Cover, 1/2" NPT Hubs
XIHFGCX 2L-3 Lug
Description Flat Glass Cover, 1/2" NPT Hubs
25⁄8"
4 15⁄16"
47⁄16" 61⁄8"
6 5⁄16"
3 3⁄16"
SOLID COVER
Catalog Number XIHDCX 2L-3 Lug
EXPLOSIONPROOF
2 9 ⁄ 16 "
Instrument Housings
2 3⁄16"
3 3 ⁄16"
GLASS COVER
Description
Catalog Number
Dome Cover,- 1⁄2" NPT Hubs
XIHDGCX 2L-3 Lug
4801 West 150th Street, Cleveland, Ohio 44135
Description Dome Glass Cover, 1/2" NPT Hubs
TE L 216.267.9000 FAX 216.267.1681
[email protected]
199
EXPLOSIONPROOF INSTRUMENT HOUSING
XDHI (Mini) SERIES
1-5/16” ID Enclosures Double-Ended Housing
XDHI housings are designed to isolate incoming power connections from instrumentation. The 1-5⁄16" ID provides ample clearance to accommodate a wide variety of miniature measurement and control devices, with back-to-back chambers separated by a solid, 3⁄16" thick wall. Precision machined from sand-cast copper-free aluminum.
STANDARD FEATURES
• 1/2" NPT conduit feed-through hubs, offset into power side for maximum clearance and capacity • Front boss with 1/2" NPT opening into instrument side for conduit, sensor or probe (see design options for other sizes) • Internal and external ground screws and tamper resistant cover set screws for extra safety • A choice of solid covers or 1-13/16" diameter tempered glass window for local read out and display • Buna-Nitrile rubber gasket for NEMA Type 4X watertight applications • Corrosion resistant, “safety blue” polyester powder coating (other colors available) • Stainless steel hardware
DESIGN OPTIONS
• 2- point, power side terminal strip with sealed pass-through to instrument (add suffix “2T” to catalog number) • Power side (shallow side) cover options:.
Flat Solid
—
Standard.
Dome Glass
—
Add Suffix “A”.
Flat Glass
—
Add Suffix “B”.
Dome Solid
—
Add Suffix “C”
• 1⁄4–20 UNC holes in front boss for bracket mounting. • Front Boss Modifications: 3/4” NPT & various NPSM & Metric entries available in place of standard 1/2” NPT. Consult factory.
Certifications
200
Class I, Groups B,C,D
UL 1203
Class III
CSA C22.2 No. 30.
Class I, Zone 1, AEx d IIB+H2
UL 60079-0/UL 60079-1
Ex d IIB+H2
CSA 60079-0/CSA 60079-1
0539 II 2GD (Optional)
ATEX Directive 94/9/EC
Ex d IIB+H2 (Optional)
EN 60079-0 & EN 60079-1 (Optional)
IEC Ex (Optional)
IEC 60079-0 & IEC 60079-1 (Optional)
Type 4X
UL 50
IP 66
IEC 60529
4X, 7BCD, 9EFG
NEMA Compliance
The ADALET Engineering Department is Available to Assist you in the Selection of Enclosures and Accessories.
EXPLOSIONPROOF INSTRUMENT HOUSING
XDHI (Mini) SERIES 31⁄2"
1⁄2"
313⁄16"
2 1⁄4"
Solid Cover Arrangements
Glass Cover Arrangements 1 13⁄16"
1 5⁄16" 1 5⁄16"
1"
SOLID COVER
Catalog Number
XDHIFCX
1 5⁄16" 2 1⁄2" 1 5⁄16"
3" 2 1⁄4"
1"
13⁄8"
Description
GLASS COVER
Catalog Number
Flat Cover, 1/2" NPT Hubs
XDHIFGCX
3 3⁄4"
13⁄8"
Description Flat Glass Cover, 1/2" NPT Hubs
113⁄16"
33⁄4"
43⁄4" 15⁄16"
1 5⁄16" 1 5⁄16"
215⁄16"
1"
SOLID COVER
Catalog Number
XDHIDCX
15⁄16"
1"
13⁄8"
GLASS COVER
Description
Catalog Number
Dome Cover, 1/2" NPT Hubs
XDHIDGCX
4801 West 150th Street, Cleveland, Ohio 44135
31⁄2"
13⁄8"
Description Dome Glass Cover, 1/2" NPT Hubs
TE L 216.267.9000 FAX 216.267.1681
[email protected]
201
EXPLOSIONPROOF INSTRUMENT HOUSING
XDH (Standard) SERIES
3-3/16” ID Enclosures Double-Ended Housing
XDH housings are designed to isolate incoming power connections from instrumentation. The 3-3⁄16" ID provides ample clearance to accommodate a wide variety of measurement and control devices, with back-to-back chambers separated by a solid, 3⁄8" thick wall. Precision machined from sand-cast copper-free aluminum.
STANDARD FEATURES
• 3⁄4" NPT conduit feed-through hubs, offset into power side for maximum clearance and capacity • Front boss with 3⁄4" NPT opening into instrument side for conduit, sensor or probe (see design options for other sizes) • Internal and external ground screws and tamper resistant cover set screws for extra safety • A choice of solid covers or 2-5⁄8" diameter tempered glass window for local read out and display • Buna-Nitrile rubber gasket for NEMA Type 4X watertight applications • Corrosion resistant, “safety blue” polyester powder coating (other colors available) • Stainless steel hardware
DESIGN OPTIONS EXPLOSIONPROOF
Instrument Housings
• 2- or 4-point, power side terminal strip with sealed pass-through to instrument (add suffix “2T” or “4T” to catalog number) • Power side (shallow side) cover options:.
Flat Solid
—
Standard.
Dome Glass
—
Add Suffix “A”.
Flat Glass
—
Add Suffix “B”.
Dome Solid
—
Add Suffix “C”
• 1⁄4–20 UNC holes in front boss for bracket mounting. (Consult factory for other sizes.) • Front Boss Modifications: 1⁄2 NPT & various NPSM & Metric entries available in place of standard 3⁄4 NPT. Consult factory. • 1⁄2" NPT feed-through reducers are available – add suffix “2” to catalog‑number.
Certifications
202
Class I, Groups B,C,D
UL 1203
Class II, Groups E,F,G
FM 3615
Class III
CSA C22.2 No. 30.
Class I, Zone 1, AEx d IIC
UL 60079-0/UL 60079-1
Ex d IIC
CSA 60079-0/CSA 60079-1
0539 II 2GD (Optional)
ATEX Directive 94/9/EC
EEx d IIC (Optional)
EN 50014, EN50018 (Optional)
Type 4X
UL 50
IP 66
IEC 60529
4X, 7BCD, 9EFG
NEMA Compliance
The ADALET Engineering Department is Available to Assist you in the Selection of Enclosures and Accessories.
EXPLOSIONPROOF INSTRUMENT HOUSING
XDH (Standard) SERIES 4 1⁄2"
13⁄ 16"
4 11 ⁄16"
2 1⁄4"
Solid Cover Arrangements
Glass Cover Arrangements 25⁄8"
1 5⁄16"
SOLID COVER
Catalog Number
XDHFCX
3 3⁄16" 2 5⁄16" 3⁄4"
17⁄8"
1 5⁄16"
Description
GLASS COVER
Catalog Number
Flat Cover, 3⁄4" NPT Hubs
XDHFGCX
3 7⁄8"
17⁄8"
Description Flat Glass Cover, 3⁄4" NPT Hubs
EXPLOSIONPROOF
3⁄4"
3 1⁄2"
2 11⁄16"
Instrument Housings
3 3⁄16"
25⁄8"
5 7⁄8"
6 1⁄16" 3 3⁄16"
3 3⁄16" 3⁄4"
5 1⁄16"
1 5⁄16"
SOLID COVER
Catalog Number
XDHDCX
3⁄4"
1 5 ⁄16"
17⁄8"
GLASS COVER
Description
Catalog Number
Dome Cover, 3⁄4" NPT Hubs
XDHDGCX
4801 West 150th Street, Cleveland, Ohio 44135
4 9⁄16"
17⁄8"
Description Dome Glass Cover, 3⁄4" NPT Hubs
TE L 216.267.9000 FAX 216.267.1681
[email protected]
203
EXPLOSIONPROOF INSTRUMENT HOUSING
XIHM (Medium) SERIES
3-9/16” ID Enclosure (standard) 3-5/8” ID Enclosure (available-see note) XIHM housings accommodate large diameter assemblies, multi-level circuit boards or wide angle readouts and displays. The 3-9⁄16" ID provides maximum clearance to facilitate instrument mounting, calibration or service. Precision machined from sandcast, copper-free aluminum.
STANDARD FEATURES
• 3⁄4" NPT conduit feed-through hubs offset for maximum clearance and capacity • 7⁄16" thick base for blind tapped instrument mounting holes in any location • Glass cover models have a large 2-5⁄8" diameter, tempered glass window for local read out • 60° chamfer on window opening provides enhanced viewing angle • Buna-Nitrile rubber gasket for NEMA Type 4X watertight applications • Front boss for bracket mounting or for use as additional conduit or sensor entry • Corrosion resistant, “safety blue” polyester powder coating (other colors available) • Internal and external ground screws and tamper resistant cover set screw for extra safety • Stainless steel hardware
EXPLOSIONPROOF
Instrument Housings
DESIGN OPTIONS
• Mounting lugs with 5⁄16" holes (add suffix “L” to catalog number) • Additional small hole drilling and tapping in the backwall for mounting of instrumentation • 1⁄2" NPT or 3⁄4" NPT opening into back wall for conduit, sensor or probe • Front Boss Modifications: 1⁄2", 3⁄4" or 1" NPT; 1⁄2", 3⁄4" or 1" NPSM; or 20mm or 25mm for sensor, probe or conduit entry • 1⁄2" NPT reducers are available – add suffix “2” to catalog‑number • 1⁄4–20 UNC holes in front boss for bracket mounting (Consult factory for other sizes).
NOTE Throat diameter can be increased to 3 5⁄8" – please consult factory
Certifications
204
Class I, Groups B,C,D
UL 1203
Class II, Groups E,F,G
FM 3615
Class III
CSA C22.2 No. 30.
Class I, Zone 1, AEx d IIC
UL 60079-0/UL 60079-1
Ex d IIC
CSA 60079-0/CSA 60079-1
0539 II 2GD (Optional)
ATEX Directive 94/9/EC
EEx d IIC (Optional)
EN 50014, EN50018 (Optional)
Type 4X
UL 50
IP 66
IEC 60529
4X, 7BCD, 9EFG
NEMA Compliance
The ADALET Engineering Department is Available to Assist you in the Selection of Enclosures and Accessories.
EXPLOSIONPROOF INSTRUMENT HOUSING
XIHM (Medium) SERIES 5"
5 1⁄4" 4 5⁄8"
3 7⁄ 8"
Optional mounting lugs (2)
Solid Cover Arrangements
Glass Cover Arrangements 25⁄8"
4 1⁄4"
*
4 3⁄4"
3 9⁄16"
3 9⁄16" 3 5⁄16" *
SOLID COVER
Catalog Number
GLASS COVER
Description
Catalog Number
XIHMFGCX
XIHMFCX
Flat Cover, 3⁄4" NPT Hubs
XIHMMCX
Mid Size Cover, 3/4" NPT Hubs
Description Flat Glass Cover, 3⁄4" NPT Hubs
EXPLOSIONPROOF
* Midsize solid cover available, add 11/16” to above dimensions
Instrument Housings
3 1⁄16"
25⁄8"
6 11⁄16"
4 3⁄4" 7 5⁄8"
63⁄8" 3 9⁄16"
3 9⁄16"
SOLID COVER
Catalog Number
XIHMDCX
GLASS COVER
Description
Catalog Number
Dome Cover, 3⁄4" NPT Hubs
XIHMDGCX
4801 West 150th Street, Cleveland, Ohio 44135
Description Dome Glass Cover, 3⁄4" NPT Hubs
TE L 216.267.9000 FAX 216.267.1681
[email protected]
205
EXPLOSIONPROOF INSTRUMENT HOUSING
XIHMK(Medium) K SERIES XIHM
3-9/16” ID Enclosures
Custom Colors
XIHMK housings accommodate large diameter assemblies, multi-level circuit boards or wide angle readouts and displays. The 3-9 ⁄16” ID provides maximum clearance to facilitate instrument mounting, calibration or service. Precision machined from sand-cast, copper-free aluminum.
Glass Cover
STANDARD FEATURES
• 3⁄4” NPT conduit feed-through hubs offset for maximum clearance and capacity • 7⁄16” thick base for blind tapped instrument mounting holes in any location • Glass cover models have a large 2.5” diameter, tempered glass window for local read out
Solid Cover
• Buna-Nitrile rubber gasket for NEMA Type 4X watertight applications • Front boss for use as additional conduit or sensor entry • Corrosion resistant, “safety blue” polyester powder coating (other colors available) • Internal and external ground screws and tamper resistant cover set screw for extra safety • Stainless steel hardware
DESIGN OPTIONS
• Mounting lugs with 5⁄16" holes EXPLOSIONPROOF
Instrument Housings
• Additional small hole drilling and tapping in the backwall for mounting of instrumentation • 1⁄2" NPT or 3⁄4" NPT opening into back wall for conduit, sensor or probe • Front Boss Modifications: various entry sizes available for sensor, probe or conduit. Consult factory. • 1⁄2" NPT reducers are available – add suffix “2” to catalog‑number
Certifications
206
Class I, Groups B,C,D
UL 1203
Class II, Groups E,F,G
FM 3615
Class III
CSA C22.2 No. 30.
Class I, Zone 1, AEx d IIC
UL 60079-0/UL 60079-1
Ex d IIC
CSA 60079-0/CSA 60079-1
0539 II 2GD (Optional)
ATEX Directive 94/9/EC
EEx d IIC (Optional)
EN 50014, EN50018 (Optional)
Type 4X
UL 50
IP 66
IEC 60529
4X, 7BCD, 9EFG
NEMA Compliance
The ADALET Engineering Department is Available to Assist you in the Selection of Enclosures and Accessories.
EXPLOSIONPROOF INSTRUMENT HOUSING
XIMH (Medium) K SERIES XIMHK
5/3
52
52
5 5⁄32"
5/3
5"
Glass Cover Arrangements 21⁄2"
EXPLOSIONPROOF
Solid Cover Arrangements
Instrument Housings
51⁄ 2"
4 3⁄4"
4 1⁄4" 3 9⁄16" 3"
SOLID COVER
Catalog Number
XIHMKFCX
23⁄16"
GLASS COVER
Description
Catalog Number
Flat Cover, 3⁄4" NPT Hubs
XIHMKFGCX
4801 West 150th Street, Cleveland, Ohio 44135
Description Flat Glass Cover, 3⁄4" NPT Hubs
TE L 216.267.9000 FAX 216.267.1681
[email protected]
207
EXPLOSIONPROOF INSTRUMENT HOUSING
XDHM (Medium) SERIES
3-5/8” ID Enclosures Double-Ended Housing
XDHM housings are designed to isolate incoming power connections from instrumentation. The 3-5⁄8" ID provides maximum clearance to facilitate instrument mounting, calibration or service, with back-to-back chambers separated by a solid, 1⁄2" thick wall. Precision machined from sand-cast, copper-free aluminum.
STANDARD FEATURES
• 3⁄4" NPT conduit feed-through hubs, offset into power side for maximum clearance and capacity • Front boss with 3⁄4" NPT opening into instrument side for conduit, sensor or probe (see design options for other sizes) • Internal and external ground screws and tamper resistant cover set screws for extra safety • A choice of solid covers or 2-5⁄8" diameter tempered glass window for local read out and display • 60° chamfer on window opening provides enhanced viewing angle • Buna-Nitrile rubber gasket for NEMA Type 4X watertight applications • Corrosion resistant, “safety blue” polyester powder coating (other colors available) • Stainless steel hardware
EXPLOSIONPROOF
Instrument Housings
DESIGN OPTIONS
• 2- to 8-point, power side terminal strip with sealed pass-through to instrument (add suffix “2T”, “4T”, “6T” or “8T” to catalog number) • Internal wall can be modified (Drilled & Tapped) to suit design needs, or be completely removed and still maintain approvals. Please consult factory. • Power side (shallow side) cover options:.
Flat Solid Dome Glass Flat Glass Dome Solid Midsize Solid
— — — — —
Standard. Add Suffix “A”. Add Suffix “B”. Add Suffix “C” Add Suffix “D”
• Front Boss Modifications: 1⁄2", 3⁄4" or 1" NPT; 1⁄2", 3⁄4" or 1" NPSM; or 20mm or 25mm opening modify for sensor, probe or conduit entry • 1⁄2" NPT reducers are available – add suffix “2” to catalog‑number • 1⁄4–20 UNC holes in front boss for bracket mounting. (Consult factory for other sizes.)
Certifications
208
Class I, Groups B,C,D
UL 1203
Class II, Groups E,F,G
FM 3615
Class III
CSA C22.2 No. 30.
Class I, Zone 1, AEx d IIC
UL 60079-0/UL 60079-1
Ex d IIC
CSA 60079-0/CSA 60079-1
0539 II 2GD (Optional)
ATEX Directive 94/9/EC
EEx d IIC (Optional)
EN 50014, EN50018 (Optional)
Type 4X
UL 50
IP 66
IEC 60529
4X, 7BCD, 9EFG
NEMA Compliance
The ADALET Engineering Department is Available to Assist you in the Selection of Enclosures and Accessories.
EXPLOSIONPROOF INSTRUMENT HOUSING
XDHM (Medium) SERIES 5"
1 1⁄ 8"
5 1⁄4"
2 1⁄4"
Solid Cover Arrangements
Glass Cover Arrangements 25⁄8"
*
* 3 5⁄16"
3 1⁄16"
13⁄16"
* 1 7⁄16"
4 13⁄16"
3 5⁄8"
1 7⁄16"
115⁄16" *
115⁄16"
* Midsize solid cover available – add 11/16" to above dimensions.
SOLID COVER
Catalog Number
GLASS COVER
Description
Catalog Number
XDHMFCX
Flat Cover, 3/4" NPT Hubs
XDHMFGCX
XDHMMCX
Mid Size Cover, 3/4" NPT Hubs
Description Flat Glass Cover, 3⁄4" NPT Hubs
EXPLOSIONPROOF
13⁄16"
4 5⁄16"
Instrument Housings
3 5⁄8"
25⁄8"
7 11⁄16"
6 7⁄16"
3 5⁄8" 13⁄16"
3 5⁄8" 6 11⁄16"
1 7⁄16"
SOLID COVER
Catalog Number
XDHMDCX
13⁄16"
4 3⁄4"
1 7⁄16" 115⁄16"
GLASS COVER
Description
Catalog Number
Dome Cover, 3⁄4" NPT Hubs
XDHMDGCX
4801 West 150th Street, Cleveland, Ohio 44135
115⁄16"
Description Dome Glass Cover, 3⁄4" NPT Hubs
TE L 216.267.9000 FAX 216.267.1681
[email protected]
209
EXPLOSIONPROOF INSTRUMENT HOUSING
XIHL (Large) - LargeSERIES
4” ID Enclosures XIHL housings accommodate large diameter assemblies, multi-level circuit boards or wide angle readouts and displays. The 4" ID provides maximum clearance to facilitate instrument mounting, calibration or service. Precision machined from sand-cast copper-free aluminum.
STANDARD FEATURES
• 3⁄4" NPT conduit feed-through hubs offset for maximum clearance and capacity • 1⁄2" thick base for blind tapped instrument mounting holes in any location • Glass cover models have a large 3-5⁄16" diameter, tempered glass window for local read out • Buna-Nitrile rubber gasket for NEMA Type 4X watertight applications • Corrosion resistant, “safety blue” polyester powder coating (other colors available) • Internal and external ground screws and tamper resistant cover set screw for extra safety • Stainless steel hardware
DESIGN OPTIONS
• Four 1⁄4–20 UNC holes in front boss for bracket mounting
EXPLOSIONPROOF
Instrument Housings
• Front Boss and Backwall Modifications: 1⁄2" to 1" NPT, 1⁄2" to 3⁄4" NPSM or 20 mm for sensor, probe or conduit entry. Consult factory for other sizes. • 1⁄2" NPT reducers are available – add suffix “2” to catalog‑number
Certifications
210
Class I, Groups B,C,D
UL 1203
Class II, Groups E,F,G
FM 3615
Class III
CSA C22.2 No. 30.
Class I, Zone 1, AEx d IIC
UL 60079-0/UL 60079-1
Ex d IIC
CSA 60079-0/CSA 60079-1
0539 II 2GD (Optional)
ATEX Directive 94/9/EC
EEx d IIC (Optional)
EN 50014, EN50018 (Optional)
Type 4X
UL 50
IP 66
IEC 60529
4X, 7BCD, 9EFG
NEMA Compliance
The ADALET Engineering Department is Available to Assist you in the Selection of Enclosures and Accessories.
EXPLOSIONPROOF INSTRUMENT HOUSING
XIHL (Large) XIHL -SERIES Large 5 7⁄16"
5"
5 5⁄8"
4 1⁄16" 5⁄16"
Diameter Mounting Lugs
Solid Cover Arrangements
Glass Cover Arrangements 3 5⁄16"
5 5⁄8"
5 1⁄8" 4"
4"
SOLID COVER
Catalog Number
XIHLFCX
GLASS COVER
Description
Catalog Number
Flat Cover, 3⁄4" NPT Hubs
XIHLFGCX
Description
Flat Glass Cover, 3⁄4" NPT Hubs 3 5⁄16"
6"*
5 3⁄4"
7 1⁄8" *
EXPLOSIONPROOF
Instrument Housings
3 3⁄4"
4"
7 5⁄8"
4"
4"
* Extended dome height cover available, add 15/16” to dimensions
SOLID COVER
Catalog Number
GLASS COVER
Description
Catalog Number
XIHLDGCX
XIHLDCX
Dome Cover, 3⁄4" NPT Hubs
XIHLECX
Extended dome cover
4801 West 150th Street, Cleveland, Ohio 44135
Description
Dome Glass Cover, 3⁄4" NPT Hubs
TE L 216.267.9000 FAX 216.267.1681
[email protected]
211
EXPLOSIONPROOF INSTRUMENT HOUSING
XDHL (Large) SERIES
4” ID Enclosures
Double-Ended Housing XDHL housings are designed to isolate incoming power connections from instrumentation. The 4" ID provides maximum clearance to facilitate instrument mounting, calibration or service, with back-to-back chambers separated by a solid, 1⁄2" thick wall. Precision machined from sand-cast, copper-free aluminum.
STANDARD FEATURES
• 3⁄4" NPT conduit feed-through hubs, offset into power side for maximum clearance and capacity • Front boss with 3⁄4" NPT opening into instrument side for conduit, sensor or probe (see design options for other sizes) • Internal and external ground screws and tamper resistant cover set screws for extra safety • A choice of solid covers or 3-5⁄16" diameter tempered glass window for local read out and display • Buna-Nitrile rubber gasket for NEMA Type 4X watertight applications • Corrosion resistant, “safety blue” polyester powder coating (other colors available) • Stainless steel hardware
DESIGN OPTIONS EXPLOSIONPROOF
Instrument Housings
• 2- to 12-point, power side terminal strip with sealed pass-through to instrument (add suffix “2T”, “4T”, “6T”, “8T”, “10T” or “12T” to catalog number) • Internal wall can be modified (Drilled & Tapped) to suit design needs, or be completely removed and still maintain approvals. Please consult factory. • Power side (shallow side) cover options:.
Flat Solid
—
Standard.
Dome Glass Flat Glass Dome Solid
— — —
Add Suffix “A”. Add Suffix “B”. Add Suffix “C”
• Front Boss Modifications: 1⁄2", 3⁄4" or 1" NPT; 1⁄2", 3⁄4" or 1" NPSM; or 20mm, 25mm or 30mm entry for sensor, probe or conduit • 1⁄2" NPT reducers are available – add suffix “2” to catalog‑number • Four 1⁄4–20 UNC holes in front boss for bracket mounting. (Consult factory for other sizes)
Certifications
212
Class I, Groups B,C,D
UL 1203
Class II, Groups E,F,G
FM 3615
Class III
CSA C22.2 No. 30.
Class I, Zone 1, AEx d IIC
UL 60079-0/UL 60079-1
Ex d IIC
CSA 60079-0/CSA 60079-1
0539 II 2GD (Optional)
ATEX Directive 94/9/EC
EEx d IIC (Optional)
EN 50014, EN50018 (Optional)
Type 4X
UL 50
IP 66
IEC 60529
4X, 7BCD, 9EFG
NEMA Compliance
The ADALET Engineering Department is Available to Assist you in the Selection of Enclosures and Accessories.
EXPLOSIONPROOF INSTRUMENT HOUSING
XDHL (Large) SERIES 53⁄8"
1 5⁄ 16" 5 5⁄8"
2 1⁄4"
Solid Cover Arrangements
Glass Cover Arrangements 3 5⁄16"
SOLID COVER
Catalog Number
XDHLFCX
3 3⁄4"
13⁄16"
2 1⁄8"
5 1⁄2"
2 1⁄8"
2 5⁄8"
GLASS COVER
Description
Catalog Number
Flat Cover, 3⁄4" NPT Hubs
XDHLFGCX
2 5⁄8"
Description Flat Glass Cover, 3⁄4" NPT Hubs 3 5⁄16"
7" *
71⁄2" 4"
4" 13⁄16"
EXPLOSIONPROOF
4"
13⁄16"
4"
5"
Instrument Housings
4"
6"*
2 1⁄8"
13⁄16"
5 3⁄4"
2 1⁄8"
2 5⁄8"
2 5⁄8"
* Extended height cover available, add 15/16” to dimensions
SOLID COVER
Catalog Number
GLASS COVER
Description
Catalog Number
XDHLDCX
Dome Cover, 3⁄4" NPT Hubs
XDHLDGCX
XDHLECX
Extended dome cover, 3⁄4" NPT Hubs
4801 West 150th Street, Cleveland, Ohio 44135
Description Dome Glass Cover, 3⁄4" NPT Hubs
TE L 216.267.9000 FAX 216.267.1681
[email protected]
213
EXPLOSIONPROOF INSTRUMENT HOUSING
XIHS (Small) SERIES
2-5/8” ID Enclosures XIHS housings are designed to accommodate small instruments or devices. The 2-5⁄8" ID enclosure is offered in six different conduit configurations and a choice of cover arrangements. Precision machined from sand-cast, copper-free aluminum.
STANDARD FEATURES
• 1⁄2", 3⁄4" or 1" NPT conduit feed-through hubs for power • Internal ground screw • Interior instrument mounting bosses that accommodate blind tapped holes on a 2" bolt circle • Glass cover arrangements with a 1-1⁄8" diameter tempered glass window for local read out • Buna-Nitrile rubber gasket for NEMA Type 4X watertight applications • Tumblast, natural aluminum finish
DESIGN OPTIONS
• Corrosion resistant, “safety blue” polyester powder coating (other colors available)
EXPLOSIONPROOF
Instrument Housings
Certifications
214
Class I, Groups B,C,D
FM Standard 3615
Class II, Groups E,F,G
UL Standard 1203
Class III
CSA Standard C22.2 No. 30
4X, 7BCD, 9EFG
NEMA Compliance
The ADALET Engineering Department is Available to Assist you in the Selection of Enclosures and Accessories.
EXPLOSIONPROOF INSTRUMENT HOUSING
XIHS (Small) SERIES
COVER ARRANGEMENTS
4" 2 5⁄8" 1 11⁄16"
SOLID COVER
Base Styles
B C D
2 5⁄8"
3 1 ⁄2"
3⁄16"
4 1⁄16"
5 1⁄16"
2 5⁄8"
2 5⁄8"
3 1 ⁄2"
3 1 ⁄2"
5 3⁄4"
Catalog #
Conduit Size
Catalog #
Conduit Size
Catalog #
Conduit Size
XIHSBFC2
1⁄2" NPT
XIHSBDC2
1⁄2" NPT
XIHSBDGC2
1⁄2" NPT
XIHSBFC3
3⁄4" NPT
XIHSBDC3
3⁄4" NPT
XIHSBDGC3
3⁄4" NPT
XIHSBFC4
1" NPT
XIHSBDC4
1" NPT
XIHSBDGC4
1" NPT
XIHSCFC2
1⁄2" NPT
XIHSCDC2
1⁄2" NPT
XIHSCDGC2
1⁄2" NPT
XIHSCFC3
3⁄4" NPT
XIHSCDC3
3⁄4" NPT
XIHSCDGC3
3⁄4" NPT
XIHSCFC4
1" NPT
XIHSCDC4
1" NPT
XIHSCDGC4
1" NPT
XIHSDFC3
3⁄4" NPT
XIHSDDC3
3⁄4" NPT
XIHSDDGC3
3⁄4" NPT
XIHSDFC4
1" NPT
XIHSDDC4
1" NPT
XIHSDDGC4
1" NPT
XIHSLFC2
1⁄2" NPT
XIHSLDC2
1⁄2" NPT
XIHSLDGC2
1⁄2" NPT
XIHSLFC3
3⁄4" NPT
XIHSLDC3
3⁄4" NPT
XIHSLDGC3
3⁄4" NPT
XIHSLFC4
1" NPT
XIHSLDC4
1" NPT
XIHSLDGC4
1" NPT
XIHSTFC2
1⁄2" NPT
XIHSTDC2
1⁄2" NPT
XIHSTDGC2
1⁄2" NPT
XIHSTFC3
3⁄4" NPT
XIHSTDC3
3⁄4" NPT
XIHSTDGC3
3⁄4" NPT
XIHSTFC4
1" NPT
XIHSTDC4
1" NPT
XIHSTDGC4
1" NPT
XIHSXFC2
1⁄2" NPT
XIHSXDC2
1⁄2" NPT
XIHSXDGC2
1⁄2" NPT
XIHSXFC3
3⁄4" NPT
XIHSXDC3
3⁄4" NPT
XIHSXDGC3
3⁄4" NPT
XIHSXFC4
1" NPT
XIHSXDC4
1" NPT
XIHSXDGC4
1" NPT
XIHSYFC23
ONE 1⁄2” NPT
XIHSYDC23
ONE 1⁄2” NPT
XIHSYDGC23
ONE 1⁄2” NPT
T X Y
ONE 3⁄4" NPT
ONE 3⁄4" NPT
EXPLOSIONPROOF
L
Instrument Housings
ONE 3⁄4" NPT
NOTE Above dimensions are for 1/2" and 3/4" NPT. For 1" NPT housings, add 5/16" to height dimensions
E
A
C
E
E
A C
D
D
B F
Style “D”
Style “B”
Conduit Size
A
B
C
D
E
F
1/2
3 1/2
2-1/16
2-5/8
1-11/16
7/8
7/8
3/4
3 1/2
2-1/16
2-5/8
1-11/16
7/8
7/8
1
3 1/2
2-3/8
2-5/8
2
1
1
4801 West 150th Street, Cleveland, Ohio 44135
TE L 216.267.9000 FAX 216.267.1681
[email protected]
215
EXPLOSIONPROOF INSTRUMENT HOUSING
XDF
Custom Enclosure Systems for Digital Instrumentation
Environments requiring explosionproof or dust-tight enclosures. Housing for panel mounted instrumentation with or without external operator functions – can accommodate standard DIN or other size devices.
INSTRUMENTATION EXAMPLES
• Flow Meters • Level Indicators • Motion Controllers • Temperature Monitors • Gas Analyzers
FEATURES
• Space saving rectangular design • Enclosure dimensions customized to match the instrument • A range of rectangular window openings • Choice of quantity and location of miniature operators including “key pad” configuration • Front or rear accessibility for instrument service EXPLOSIONPROOF
Instrument Housings
• Watertight NEMA 4 gasketing
6 9⁄16"
Optional Configurations
3 3⁄4"
• Choice of surface finishes • Recessed Allen Head cover bolts for appearance and security • Special nameplating available. 9 1⁄4" AVAILABILITY & SUPPORT
12 1⁄16"
• Adalet engineering will review your specific requirements. • Adalet offers design support, custom dimensional layout, product prototyping, testing and certification assistance.
Front Plate
• Production scheduling and inventory to match defined needs. • Custom sizes available, consult factory for details. 10 3⁄16"
8 1⁄2"
Body
Back Plate
Certifications Class I, Groups C & D
FM Standard 3615
Class II, Groups E, F, & G
CSA Standard C22.2 No. 30.
Class III NEMA 4, 7CD, 9EFG
216
The ADALET Engineering Department is Available to Assist you in the Selection of Enclosures and Accessories.