Experience that Delivers

03

Wood Group Kenny

An introduction to Wood Group Kenny

04/05

Subsea, Pipelines & Risers

06/07

Project Experience

Wood Group Kenny strives to provide leading-edge life cycle engineering and management for subsea, pipeline and associated developments all over the world.

All-of-Facility Integrity Management

We pride ourselves in nurturing the best talent, winning and delivering the most challenging projects, and creating industry leading software and technology.

08/09

Our global expertise and capabilities Our experience of multidiscipline and niche projects

Our innovative solutions and technologies

10

Pipelines, Flow Assurance and Technology

Our dedicated, high performance workforce brings a wealth of experience to the industry and ensures that we always deliver exceptional value for our clients.

Renewables

Wood Group Kenny has long-established bases in the main energy hubs of the world, and we continue to extend our global reach with permanent operations in 16 countries.

Specialist expertise and our commitment to innovation

11

Our services for renewable energies

Steve Wayman, Chief Executive Officer, Wood Group Kenny

Field Development Studies Flow Assurance Analysis Subsea Systems Design Offshore Pipelines Design Riser and Mooring Systems Design Floating Systems Engineering Materials Engineering Onshore Pipelines and Facilities Design All-of-Facility Integrity Management Operations Support Simulation-based Decision Support Solutions Project Management Renewables Engineering Design by Lighthouse www.lighthouse.co

Software and Technology Development

Introduction

Wood Group Kenny is a global organisation providing life-cycle engineering, project management, operations support and integrity solutions for the offshore and onshore energy industries. We have over 2500 employees located around the world, (office locations indicated as • on map below) providing multidisciplinary teams for front-end engineering design through to operations support. Wood Group Kenny has thirty years worldwide experience providing specialist capabilities within the following service areas: • Subsea and pipelines engineering design and project management • Riser design, software and advanced subsea technology • Flow assurance and process optimisation • Integrity management and materials engineering • Offshore & onshore renewables • Offshore and onshore pipelines engineering Combining the expertise and track record of our leading

brands, Wood Group Kenny’s key strengths include: • Operating the largest independent subsea hardware delivery and project management team in the world • The ability to provide a fully integrated technology based service delivery from our 25 offices throughout the world • Independence from equipment suppliers, vessel contractors and inspection contractors • The capability to fully integrate pipeline, riser, flow assurance, mooring and vessel engineering disciplines in delivering a SURF design solution to our clients • Our independent asset lifecycle management consultancy providing bespoke, fit-for-purpose engineering solutions and advice • A global offshore and onshore pipeline resource with an extensive network of engineers and specialists.

Wood Group Kenny’s specialist businesses are:

Wood Group Kenny is a business within the Engineering division of the international energy services company, Wood Group. Wood Group Engineering comprises Wood Group Kenny and Wood Group Mustang. Wood Group Engineering operates in more than 20 countries and holds a strong position in the engineering and project management of facilities and topsides through Wood Group Mustang, and subsea and pipelines through Wood Group Kenny. Wood Group employs more than 41,000 people worldwide, has annual sales of more than $6billion and operates in 50 countries.

03

04

Subsea

Subsea, Pipelines & Risers Wood Group Kenny has the largest and widest internationally spread team of subsea engineering specialists in the world. We are a global leader in riser design and flexible pipe technology, and we have the largest independent subsea hardware delivery and project management team worldwide. We provide total life services and can offer a combination of experience, responsiveness and engineering innovation.

www.woodgroupkenny.com

Subsea

Project and Delivery Management Subsea Projects

Wood Group Kenny has 30 years experience in engineering subsea projects in offshore basins all over the world. The company has designed subsea infrastructure for developments that range from single subsea tieback wells to developments with up to 100 subsea wells, in water depths up to 2,500m. Our engineering scopes have ranged from concept definition studies to Front End Engineering Design (FEED) to Detail Engineering and Project Management scopes. Our capabilities and experience also extend into providing engineering and project management services for the operations phase of a subsea development.

At Wood Group Kenny, we have a dedicated project management services group spread across our business internationally consisting of project management professionals with extensive experience of the offshore oil and gas industry.  Over many years we have developed best-practice project management procedures that are tailored to the needs of both our clients and our business. These include procedures for project and document control, quality control and quality assurance implementation, technical safety, cost estimation, specification and request-for-tender preparation, procurement coordination, risk and interface management, and the development and management of subsea project execution plans.

Our key strength is that we provide a fully integrated engineering capability from the subsea wellhead up to the topsides connection that includes subsea equipment and controls design, subsea manifolds and structures design, flow assurance analysis, and the design of pipelines, umbilicals and risers.  For floating production subsea developments, the riser system design is also performed in an integrated manner with the floating vessel motions and mooring design. Design for effective subsea integrity management and life cycle assurance is always integral to our design approach.

Within our overall project management capability, we offer specific “Delivery Management” services whereby we combine our project management skills with unique technical and design know-how of a part of the subsea system, particularly where such know-how is crucial to a successful delivery and offshore installation. Such examples include our Delivery Management services for flexible, steel and hybrid risers. Here our unique knowledge of riser system design and technology enhances our ability to deliver a safe, effective and efficient riser solution to our client.

All our engineering and project management services are provided independently of any subsea equipment suppliers, subsea construction contractors and platform vessel owners.  Hence, our focus is on providing a solution that best meets the requirements of our client’s subsea development.

Subsea Operations Support

We deliver our subsea services based on technical engineering excellence combined with strong project management skills, all underpinned by our experience.  Our engineers variably work on technically advanced specialist studies and participate in large multi-disciplined teams for subsea, umbilical, risers and flowlines (SURF) FEED and detail design projects.

Wood Group Kenny is a market leader in the provision of operations support and asset management services through our Operations Support Group. We have unrivalled experience in providing total life services and can offer the best combination of experience, responsiveness and engineering innovation. Our team has provided a full range of operation support services to a number of operators for more than a decade. We are able to tailor our support to suit our customer’s needs from the provision of a full subsea operations team, to dealing with specific operating problems and one-off technical challenges.

Pipeline Engineering

J P Kenny leads our pipeline engineering design for subsea projects. We are technology leaders in pipeline engineering and have been responsible for designing infield pipelines for some of the longest subsea tieback developments in the world in water depths up to 2,500 metres and on some of the most complex seabed conditions leading to the development of patented anchoring systems. We have led the industry in the application of limit-state design techniques, pipe-in-pipe systems, pipeline stability and a host of pipeline related techniques. We have engineered the majority of high-pressure, high–temperature systems operating worldwide, developed snake lay solutions to deal with pipeline lateral buckling and believe that we have more extensive pipe-in-pipe experience than any other company. A full range of services is offered throughout a project’s life cycle, from feasibility through FEED into detailed design and into operations support.

Flow Assurance

Our specialised consultancy, MSi Kenny, is experienced in the application of advanced technology for the design and optimal operation of oil and gas production, pipeline and processing facilities. Our consultants are recognised as world-class experts in flow assurance and combine strong analytical capabilities and innovative technology in transient multiphase flow, thermodynamics, dynamic process simulation, production chemistry, and computational fluid dynamics. Our know-how in engineering and operations of multiphase production systems is embedded in our field-proven simulation software suite called Virtuoso®. Through our software suite, we provide project-specific, turnkey, cost-effective solutions for real-time optimisation of both single-phase and multiphase production facilities and pipelines.

Riser Engineering

Our riser engineering business, MCS Kenny, is a world leader in dynamic riser design with an extensive track record across all riser types and water depths. This includes flexible risers, steel catenary risers, hybrid steel-flexible risers, and top tensioned risers for both floating production and floating drilling platforms. Our design capability is supported by world leading, in-house developed, industry validated riser analysis software. On a number of occasions over the last twenty five years, we have led the way in the design of new riser concepts and in the design of riser solutions for the deepest of water depths worldwide. MCS Kenny is a world leading authority on flexible pipe technology, and through our management of ongoing joint industry initiatives, we have written a number of key industry standards for both riser and flexible pipe design. We have extensive experience of riser configuration design for drilling, completion and workover risers to enable safe riser operations for drilling, completing and intervening on subsea wells. This includes the determination of top tension and buoyancy requirements to keep extreme loads and motions within allowable limits and to minimise subsea wellhead fatigue.

Floating Systems Engineering MCS Kenny provides specialised services to the offshore industry within the disciplines of naval architecture, hydrodynamic analysis and structural engineering. Using a combination of in-house developed software and licensed commercial software packages, we can carry out frequency and time domain analysis, mooring design and analysis, vessel motion analysis, marine structural design and complex non-linear system analysis.

05

06

Projects

Project Experience... With over 25 offices across the globe, Wood Group Kenny brings a wealth of experience in delivering to the energy industry. These selected case studies highlight the specialist expertise within Wood Group Kenny, displaying our latest experience and engineering techniques.

Browse LNG Project Western Australia The Browse liquefied natural gas (LNG) development, with first gas planned for 2017, is located northwest of Broome off Western Australia’s Kimberley coast. It is one of the largest offshore developments currently being undertaken worldwide, and encompasses the Calliance, Brecknock and Torosa gas-condensate fields. Wood Group Kenny consultants successfully completed the concept development, basis of design and FEED phases for the subsea and pipelines design and for the system flow assurance. Wood Group Kenny consultants also performed the steel catenary risers (SCRs) FEED in support of the Aker Solutions design concept for the Calliance and Brecknock infield facilities. The subsea and pipelines design work scope included feasibility, concept screening and FEED of the subsea infrastructure, including route selection. Major design challenges for which solutions were developed include the routing and on-bottom stability of the export pipelines through difficult terrain and very onerous metocean conditions, and the pipeline lateral buckling mitigation under high fluid temperatures. Flow assurance work continued through all project phases with challenging solutions required for waxy liquids, corrosion issues, hydrates, liquid holdup, high and low temperatures and a complicated operating envelope. This complex, hydraulically coupled system is challenging to model transiently using traditional techniques, and so the Wood Group Kenny software solutions team developed a transient integrated engineering simulator of the entire network from well perforations to onshore using the Virtuoso® software. This approach provided new insights into the operability and dynamics of the Browse offshore network and led to a more robust system design.

www.woodgroupkenny.com

Projects

Quad 204

Anadarko

Total Egina

Shah Deniz

West of Shetland

Gulf of Mexico

West of Africa

Caspian Sea

The BP Quad 204 project encompasses the redevelopment of the Schiehallion and Loyal fields, which are located approximately 150km West of Shetland in a water depth of 350m - 500m. Wood Group Kenny has been appointed by BP to provide engineering design and project management services for the subsea, umbilical, riser and flowline (SURF) infrastructure from concept through to commissioning and operations support.  Wood Group Kenny assisted BP in the evaluation of a wide range of concept options. The concept design that has been taken forward is to replace the existing FPSO with a new-build FPSO on the same location and to re-use the existing subsea infrastructure where practicable, replacing only where required and extending it as required to support additional wells. Wood Group Kenny is responsible for the design of approximately $1.2billion worth of subsea, pipeline and riser infrastructure for the project. The dedicated Wood Group Kenny engineering team is 85 strong and co-located with BP in a number of project offices around the centre of Aberdeen. Key challenges include: integrity assessment of the existing infrastructure; integration of the new subsea equipment with the re-usable existing infrastructure; detailed design of 81 new structures (totalling over 2750te) and 15 new flowlines; determination and mitigation of Flow Induced Pulsations (FLIP) in structures piping, and qualification of large, two-part riser bend stiffeners. The project commenced in 2008 and is due to start-up at the beginning of 2016.

Since 2002, Wood Group Kenny employees have served as key members of Anadarko’s Gulf of Mexico (GoM) Integrated Project Team. Over this time, Wood Group Kenny has supported Anadarko with five independent greenfield developments in water depths up to 7000ft, namely Gunnison, Constitution, I-Hub, Lucius and Heidelberg. Furthermore we have worked on numerous brownfield expansions of these and other existing GoM deepwater facilities, namely Boomvang, Nansen, Neptune, Red Hawk and Marco Polo. Our engineering responsibilities have included pre-FEED, FEED, detailed design and installation verification support on subsea tieback systems. We have provided project technical support on the manufacture of subsea trees and tree control system components, the manufacture of ultra high pressure flexible pipe, and fabrication support on numerous subsea pressure containing structures. We recently assisted Anadarko with the replacement of a critical path flexible riser system with steel lazy wave risers for their Constitution Spar - the first application of a steel lazy wave riser system in the GoM. Ongoing consultancy work to Anadarko has included flow assurance analysis; riser Certified Verification Agent (CVA); welding metallurgy and corrosion expertise; and risk assessment and integrity management strategy development. In addition to project specific engineering, consultancy and installation support responsibilities, Wood Group Kenny continually provides operational support to Anadarko associated with tree control system intervention, subsea hydrate mitigation, tieback system abandonment and support for their ever increasing, governmental regulatory and critical documentation maintenance needs.

Discovered in 2003, the Egina field is situated offshore Nigeria within the Oil Mining Lease -130, 200km from Port Harcourt, in water depths up to 1750m. The Egina Main Field development facilities will act as a production hub for the development of additional oil accumulations at Egina South and Preowei Fields. The Egina field is being developed by TOTAL Upstream Nigeria Ltd. Wood Group Kenny, alongside Nigerian engineering company Dover Engineering, completed the first comprehensive Front End Engineering Design (FEED) undertaken locally in Nigeria for the Egina Main Field. The combined team worked more than 60,000 man-hours in-country on the project. The subsea scope of work included comprehensive design studies and engineering assessments for the riser and umbilical systems, and production manifolds; the preparation of procurement specifications for the flowlines and pipeline; and the verification of material selections. The scope also included developing specifications, documentation and technology studies relating to the design of the umbilicals, flowlines, risers and the subsea production systems. Wood Group Kenny was responsible for all aspects of the riser system which is based on the use of a Steel Hybrid Riser solution. This involved the development of a full set of riser system specifications, and the design of the riser and its key components, including the buoyancy tanks. Wood Group Kenny was also responsible for the dynamic umbilicals and the pipeline system.

The Shah Deniz field was discovered in 1999 and is one of the world’s largest gas-condensate fields, with over 30 trillion cubic feet - 1 trillion cubic metres - of gas in place. It is located on the deep water shelf of the Caspian Sea, in water depths ranging from 50 to 500m. Shah Deniz Stage 2 is a giant project that will bring gas from Azerbaijan to Europe and Turkey. The project is expected to add a further 16 billion cubic meters per year (bcma) of gas production to the approximately 9 bcma from Shah Deniz Stage 1. It is one of the largest gas development projects anywhere in the world. Plans for the project include 26 subsea wells and 500km of subsea pipelines, with production commencing in 2017. We are BP’s Subsea Engineering and Project Management Services (EPMS) Contractor for this long term project and we have a team of 170 people working on this fascinating project.  ur scope of work includes O overall subsea system design and responsibility, functionality and technical assurance for the subsea production system, flowline and export pipeline design, detailed process and flow assurance assessments.

07

08

Asset Integrity

All-of-Facility Integrity Management Wood Group Integrity Management (WGIM) is Wood Group Kenny’s global all-of-facility asset integrity technology and management consultancy. WGIM’s global team delivers innovative asset integrity management (AIM) solutions and technologies across a broad range of industries. With a focus on materials engineering, we have developed a deserved reputation for excellence and impartiality. Our industry leading professionals, continually invest in new ideas and technologies, and we have developed a market leading suite of integrated services and AIM expert systems.

Our global network provides 24-hour business support, focusing on delivering local expertise backed by our worldwide resources and knowledge base. Our engineering advice is independent. We critically review third party services and products, assessing the engineering facts and ensuring we deliver the very best techno-economic solution for your organisation’s specific needs.

www.woodgroupkenny.com

Asset Integrity

Materials and Corrosion Based Services

Risk Based Integrity Management System Development

WGIM supports brownfield operations with our materials selection, coating, cathodic protection, chemical selection and fitness-for-service assessment expertise. The focus is a clients asset group or a particular material failure problem. WGIM commonly conducts a site visit of the assets in question and where relevant, corrosion, coating and cathodic protection surveys. A failure analysis report, forward looking corrosion management or integrity management plan are typical deliverables. Engineering assessments of any anomalies found by visual survey, NDT (Non Destructive Testing) or intelligent pig survey are conducted by our engineering team using specialist in-house assessment software and FEA (Finite Element Analysis) capability.

WGIM uses extensive risk assessment methodology to enable cost effective and focused integrity management of existing or design phase client assets. Up front risk engineering studies are performed to understand the threats and controls related to the assets in question. Reliability studies are performed to understand equipment, sparing and maintenance resource criticality. The assessment results are then used for the basis of development of integrity management strategies, pipeline or facility integrity management plans, IMMR (Inspection, Maintenance, Monitoring and Repair) plans, reliability plans, performance standards, written schemes of examination etc. WGIM ensures all requirements of local legislation and relevant local and international standards are employed in our best practice IM (Integrity Management) approach.

NEXUS IC for Pipelines Integrity Oman Gas Company The Oman Gas Company (OGC) has managed the integrity of their 40 pipelines on paper which has proved labour intensive, slow and prone to error. They have a vision of an integrated system that would allow the maintenance of their pipeline system integrity as before but recorded, monitored, analysed and planned within a single database that would reduce time and cost as well as minimising error.

NEXUS Integrity Centre (NEXUS IC) allows them to apply industry standard models, such as DNV and ASME B31.G, and algorithms based on their own experience into a single system. By analysing in-line inspection data within NEXUS IC, they can now combine corrosion rate predictions and fitness for service methods to determine the remaining life of pipelines subject to active corrosion. OGC committed to NEXUS IC because they saw it’s flexibility, configurability and capability would allow them to improve their time, cost and accuracy.

H2S Risk Assessment North American Operator, Gulf of Mexico WGIM was contracted by a North American Operator in 2011 to provide technical support and to facilitate a workshop to systematically assess the risk profile of continuing to operate their flexible pipelines with hydrogen sulphide (H2S) present in the bore. The initial design had not anticipated sour wells and so sweet service flexible pipes were installed, allowing only a very limited level of H2S in the bore. In 2010, bore fluid composition indicated that the wells were now producing higher than expected levels of H2S, and the workshop was set up to determine a safe and justifiable H2S exposure envelope for continued production. The workshop consisted of various activities including: a systematic and comprehensive review of the HSE risks; threat identification indicating failure modes, initiators and mechanisms, and potential consequences as applicable to sour service; and the identification of ongoing measures to validate the technical integrity of the system and reduce risk. Workshop participants established the maximum H2S operating threshold to support safe operations and recommendations were made for implementation of controls and monitoring measures such as improving H2S sampling capability and establishing controls to restrict floating vessel excursions.

Riser & Pipeline Integrity Management

Gorgon Field Development Chevron, Western Australia

BP, West of Shetland WGIM has provided continuous integrity management support to BP’s West of Shetland operations since 1997. Project support services have included: • Development and maintenance of Risk Based Inspection management strategies for the flexible risers, jumpers, rigid pipelines, and oil offloading lines • Development of new inspection, monitoring, and assessment techniques to assure integrity in these challenging environmental regions • Management of riser fatigue life re-assessment programs. In particular, WGIM provides an integrity management framework which allows BP to manage and maintain system integrity, whilst also ensuring that all operational data is logged, assessed, and stored should assessment of life extension be required. Regulatory authorities have commented that the systematic and diligent approach with which WGIM personnel have taken to maintain the integrity of BP’s operating systems demonstrates a best in class approach.

The Gorgon Project is developing the Greater Gorgon and Jansz gas fields, located about 130km and 200km respectively off the north-west coast of Western Australia, in what is Australia’s largest ever resources project. As part of a Wood Group Kenny team, executing the concept select, concept validation, FEED and detailed design set of workscopes from 2005 through to 2012, WGIM provided ongoing materials engineering expertise, and has been instrumental in establishing a life-cycle integrity management plan for Gorgon, with a designfor-integrity focus throughout. WGIM’s scope of work included extensive corrosion modelling, corrosion monitoring assessment and the development of a corrosion management, reliability management and inspection plan. The work was applied to the extensive Gorgon upstream system which includes offshore, onshore, and domestic gas pipelines and subsea architecture. Throughout the design, WGIM’s scope also included material selection for the production flowline spools, infield flowlines, manifolds, trees, valves and export pipelines. WGIM has been an integral part of a combined Wood Group Kenny, Technip and Chevron team executing the FEED and detailed design scope for the game changing Gorgon project.

09

10

Pipelines/Flow Assurance

Pipelines

Flow Assurance

Since 1978, J P Kenny has been an industry leader in designing onshore and offshore pipelines in all major locations throughout the world and to internationally recognised standards.

MSi Kenny is experienced in the application of advanced technology for the design and optimal operation of oil and gas production, pipeline and processing facilities.

Our strong global brand name and our reputation for excellence in delivery are unrivalled. Our vast and varied experience includes a significant proportion of the world’s major trunkline projects, including both subsea and onshore sections. We have achieved multimilliondollar cost savings through continuous innovation and are pleased to have pioneered many of the design methods, material technologies and installation techniques used in the industry today.

We provide full services flow assurance support at every phase of a project life cycle from pre-FEED to operation optimisation.

Our multidisciplined teams deliver innovative engineering design for offshore oil and gas developments by addressing the challenges of projects that are moving further offshore into deeper waters and harsher environments around the world. Our 20-year focus on extending deepwater capability has secured our inclusion in an engineering or management role on the majority of the deepwater systems in the world and to depths of 2,500m. We have spearheaded technology development to extend traditional fabrication limitations for major deepwater trunklines. Our expertise includes the design of export pipelines, in-field flowlines, pipe-in-pipe and bundle flowlines, tie-in pipe systems, trunklines and onshore pipelines for the transportation of oil, gas and multiphase products, and including the design of associated Above Ground Installations (AGIs), crossings and landfalls. Our onshore pipeline group operates globally in the upstream, transportation and distribution sectors, and has completed pipeline project scopes ranging from upstream in-field systems to low pressure distribution networks. Our knowledge of the design of cryogenic pipelines has been reinforced by the detailed design of the world’s first operational LPG loading line and includes technical leadership in proprietary LNG loading line systems. Finally, J P Kenny has over 15 years of experience in utilising Geographic Information Systems (GIS) and use these and allied technologies to develop cost effective and timely solutions for onshore and offshore pipeline distribution systems within a safe and environmentally sound framework. This use of spatial intelligence may help to eliminate many of the pipeline engineering design challenges by performing image interpretation to generate valuable information without extensive field survey work.

Our consulting services offer resolutions of multiphase flow dynamics, slugging, erosion, wax, hydrates, emulsion and scale problems in subsea, pipeline and riser systems. We maintain detailed knowledge in a wide variety of simulation and modeling tools that enables us to provide value to our customers in diverse ways. Our software products provide essential operational and commercial functionalities based on the unique challenges confronting each installation. These project-specific solutions address the most complex multiphase and single-phase gathering, production, transportation and processing issues. With over thousands of technical consulting projects delivered globally for 150 different companies in 50 countries, we offer unparalleled experience in vital upstream engineering disciplines such as concept screening and development, flow assurance, pre-FEED/FEED, field planning, well test, fluid sampling and laboratory analysis, among others. Our team has over 15 years of experience installing and maintaining simulation-based monitoring, optimisation, and control software for upstream production operations for 500 pipelines and 30 Integrated Process Facilities. We currently have more than 25 simulation-based, decision-support systems operating 24/7 around the world, supporting oil and gas production, and pipeline operations.

Technology Development and Software Innovation, engineering software development and technology development are key differentiators by which Wood Group Kenny has distinguished its engineering expertise over the past three decades. They are at the forefront of our business and we believe they allow us over time to deliver effective solutions and cost savings to our clients.

Technology & Software/ Renewables

www.woodgroupkenny.com

Technology Development At Wood Group Kenny, we have a global team of technology and innovation leaders who are committed to keeping our engineering at the leading edge. Through the leadership of a dedicated Group Technology Director, our technology team coordinates the delivery of our T4B (Technology for Business) and R&D programmes. Annually, we invest significant internal funds into these programmes in i) technology development that is aligned to the strategic development of our business, and ii) in innovation that has been identified directly from our subsea project experience. Furthermore, we undertake technology development projects supported by the external funds received from participants to our ongoing Joint Industry Projects (JIPs). Our track record in successfully managing and delivering results from JIPs has been established over our thirty years in business. Typically, many of our industry leading JIPs are financially supported by between 10 and 15 international companies from a mix of operator, contractor, manufacturer and regulatory authority companies, with operators largely dominating the participation. Some examples of our JIPs over the years include topics such as slug loading and response in pipelines; integrated riser and mooring design methodology; flexible pipe fatigue design methodology; design guidelines and analysis techniques for spirally welded pipelines; thermoplastic composite riser concept development for deepwater; subsea integrity management strategy and associated inspection and monitoring technology; and numerical modelling and experimental testing for seabed pipeline stability.

Software Wood Group Kenny’s key software products cover riser and pipeline engineering, flow assurance and integrity management. Our advanced riser engineering analysis software offers clients tangible business benefits in drilling, design, analysis and operations. The range includes the widely validated and industry-proven Flexcom, as well as PipeLay, DeepRiser, OptiLay, Optima and Ariane 3-Dynamic. Virtuoso® is a suite of flow assurance software products used for off-line engineering and operator trainer applications, and online real-time simulation of production operations. Over the last twenty years, 90 systems have been deployed to more than 25 companies in 20 countries. The company’s software solutions provide a variety of operational and commercial functionalities based on the unique challenges associated with each installation, addressing even the most complex multiphase and single-phase production, transportation and processing issues. The NEXUS IC suite of software is the culmination of our ongoing investment in the development of bespoke technologies and expert systems. It’s a world-class asset integrity management software suite, designed to cater for all-of-facility integrity needs and to integrate with leading CMMS systems to reduce data duplication and improve productivity.

Renewables SgurrEnergy is Wood Group Kenny’s leading engineering consultancy specialising in renewable energy projects worldwide. Our multi-disciplinary team has the capability to deliver at every phase of a project, from the early stages of site selection, feasibility and design right through to project management and operations and maintenance. With extensive experience and an international reputation for technical excellence, our global team has assessed more than 65,000MW of renewable energy projects in over 40 countries, across six continents. Headquartered in Scotland with six international offices in key renewable energy markets, SgurrEnergy has an unparalleled depth of international technical expertise and is active across the spectrum of renewable technologies. We provide advice on renewable energy projects from small off-grid power systems, specially designed for remote locations, right up to some of the world’s largest renewable energy developments, with capacities of thousands of MW, across all terrains and environments. From the Galapagos Islands to Mongolia, our engineers and consultants are working to support efficient, successful developments, ensuring the best technical advice and project management to clients. As a trusted partner for renewable energy developers, lenders, investors and operators worldwide, our dedication to working in partnership with clients and our expertise in delivering expert engineering and technical services has positioned the company as one of the leading engineering consultancies in the industry today.

Galion: The definitive wind Lidar SgurrEnergy’s flagship product, Galion, is an advanced Lidar for visualisation and measurement of wind speed, direction and behaviour. Offering a unique, all sky scanning capability and up to 4km range, both onshore and offshore, Galion is transforming the way in which wind data is collected and analysed. Beyond its 1st generation Lidar capabilities, Galion is used to conduct advanced wind flow profiling across a wind farm site, giving greater visualisation over complex terrain. The device provides project developers and investors with increased certainty, improved efficiency and a reduction in risk at every stage of the project lifecycle.

11

Wood Group Kenny has world leading experience in subsea, pipelines and riser engineering, materials engineering, flow assurance, renewable energy and all-of-facility integrity management. Our engineering capability is supported by world class, in-house developed engineering software across many disciplines.

www.woodgroupkenny.com