Certification Services Division Midsummer House Riverside Way, Bedford Road Northampton, NN1 5NX United Kingdom Tel: +44(0)1604-438-300. Fax: +44(0)1604-438-301. E-mail: [email protected]

EXAMINATION AVAILABILITY (PSL/4 Issue 83 dated 1st January 2017)

PCN examinations are available at a number of Authorised Qualifying Bodies (AQBs) and examination centres. Many AQBs have a high degree of flexibility and can conduct PCN examinations at any location, including overseas, upon demand. Table 1 shows all current BINDT Authorised Qualifying Bodies, whilst Table 2 shows Examination Centres where PCN examinations are either permanently or frequently available. TABLE 1 - BRITISH INSTITUTE OF NON-DESTRUCTIVE TESTING AUTHORISED QUALIFYING BODIES Aerospace Inspection Training, Units 9 & 10 Takeley Business Centre, Dunmow Road, Takeley, Stansted Airport, Bishop’s Stortford, Essex, CM22 6SJ PCN Coordinator: Jayn Lone T: +44(0)1279 870276 F: +44(0)1279 870751 E: [email protected] Website: www.aerospacendt.co.uk

African NDT Centre (PTY) Ltd 224 Witch-Hazel Avenue Highveld Techno Park, Centurion Pretoria, South Africa PCN Coordinator: Deborah Myburgh T: +27 (0) 12 6653248 F: +27 (0) 12 6654749 E: [email protected]

Apptrra Global AS Eiganesveien 14, 4008 Stavanger Norway PCN Coordinator: Ravindira C Dev T: +47 4558 6749 E: [email protected] E: [email protected]

Array Training LTD International Base Unit 3 & 3A Greenwell Road East Tullos Aberdeen, AB12 3AX PCN Coordinator: Ray Wilson T:+44 (0)1224243012 E: [email protected] Website: www.arraytraining.com

A Star Training & Consultancy Pte Ltd #05-111, 18 Boon Lay Way Tradehub 21 Sinagapore, 609966 PCN Coordinator: Shaik Khaja Mohiuddin T: +65 6465 0877 F: +65 6875 0183 E: [email protected]

ATTAR – Advanced Technologies Testing and Research Unit 1, 64 Bridge Road Keysborough, Victoria Australia, 3173 PCN Coordinator: Mr P Grosser T: + 61 3 9574 6144 F: + 61 3 9574 6133 E: [email protected] Website: www.attar.com.au

The British Institute of Non-Destructive Testing is an accredited certification body offering personnel and quality management systems assessment and certification against criteria set out in international and European standards through the PCN Certification Scheme.

TABLE 1 - BRITISH INSTITUTE OF NON-DESTRUCTIVE TESTING AUTHORISED QUALIFYING BODIES BIT Inspection Technology No.11, 6th Pillaiyarkoil Street Ambal Nagar Ekkattuthangal Chennai India, 600032 PCN Coordinator: Rajamanickam Baskar T: +91 9840800863 E: [email protected]

Guided Ultrasonics Ltd Wavemaker House Unit e Brentwaters Business Park The Ham, Brentford, TW8 8HQ PCN Coordinator: Dr Mark Evans T: +44 (0) 845 6050227 F: +44 (0) 845 6050228 E: [email protected]

IMechE Engineering Training Solutions 4 Europa View, Sheffield Business Park Sheffield, S9 1XH PCN Coordinator: Andy Kular T: +44 (0) 0114 3995720 F: +44 (0) 0114 2430035 E: [email protected] Website: http://www.imeche.org/arl

Lavender International Test Centre Unit 7 Penistone Station, Sheffield S36 6HP PCN Coordinator: Susan Young T: +44(0)1226 765769 F: +44(0)1226 760707 E: [email protected] Website: www.lavender-ndt.com

NDE Institute of Trinidad Ltd 15 Robertson Street Les Efforts East San Fernando Trinidad, West Indies PCN Coordinator: Alan St George T: + 868 6539343 E: [email protected]

NDT International PTE Limited 24A, Sannadhi Street, Kamakshi Nagar, Valasaravakkam, Chennai - 87. India PCN Coordinator: G Venkataraman T: +91 44 32999936 Mobile: +91 9840393344 E: [email protected] Website: www.ndtinternational.org

Noble Quality Evaluation Private Limited., FAO: Ramesh Narayanasamy Plot 20 & 21, Anjaneya Nagar (Near MIET) Gundur Tiruchirapalli, Tamil Nadu – 620 007 India PCN Coordinator: N Ramesh T: + 91 8220954947 / +91 8754042871 E: [email protected] Website: www.nobleqe.com

Royal Tech Training & Consultancy Plot No. A75, Opp Petrol Pump, Vuda Colony Gopalapatnam, Vishakapatnam Andhra Pradesh India 530027 PCN Coordinator: Rajasuhas T: + 918916524882 F: + 918916524008 E: [email protected]

Serco Limited, Stephenson House Railway Technical Centre, London Road Derby DE24 8UP PCN Coordinator: Paul Seaton T: +44(0)1332 264782 F: +44(0)1332 264965 E: [email protected]

SGS NDT Training & Examination Centre 2F, Building 8, No. 69, 1159 East Kangqiao Rd, Pudong District, Shanghai 201319, China. PCN Coordinator: Shelley Xu T: +86 (0)21 6818 3905 F: +86 (0)21 6818 3265 E: [email protected] [email protected] Website: www.ndt-training.sgs.com

PSL 4 Issue 83

Page 2 of 15

dated 1st January 2017

TABLE 1 - BRITISH INSTITUTE OF NON-DESTRUCTIVE TESTING AUTHORISED QUALIFYING BODIES Singapore Welding Society, c/o SETSCO Services PTE Limited, 18 Teban Gardens Crescent, Singapore 608925 PCN Coordinator: Nah Hock San T: +65 566 7777 F: +65 566 7718 E: [email protected] Website: www.sws.com.sg

Smart Technocrats & Consultancy Services (I) PVT Ltd Plot No.05, Sector 18a, Nerul (W) Navi Mumbai Maharashtra, India 400706 PCN Coordinator: Sunil Mukul T: 00 91 227706055 F: 00 91 227713643 E: [email protected]

South West School of NDT, Merton House Croescadarn Close, Pentwyn, Cardiff CF23 8HF PCN Coordinator: Alan Rees T: +44(0)2920 540000 F: +44(0)2920 540111 E: [email protected] [email protected] Website: www.minton.co.uk

Talon NDT Ltd, Unit 9 Murcar Commercial Park, Denmore Road Bridge of Don, Aberdeen AB23 8JW PCN Coordinator: Ian Judge T: 01224 822251 E: [email protected]

TCS NDT Training & Consultancy Services in NDT 19 Weymouth Boulevard Quinns Rocks, Perth Western Australia 6030 PCN Coordinator: Alisa Hewling T:+61 (0)415 573095 E: [email protected]

TÜV Rheinland Sonovation BV Elschot 30, 4905 AZ Oosterhout The Netherlands PCN Coordinator: Erik van der Spek T: +31 (0)162 425588 F: +31 (0)162 424343 E: [email protected] , [email protected] Website: www.tuv.com/andt

TWI Test Centre, Granta Park Great Abington, Cambridge CB21 6AL PCN Coordinator: Michal Skerik T: +44 (0)1223 899500 E: [email protected]

Wens Technical & Occupational Skills Training LLC PO Box 393179, Unit 2F-A-02 Empire Heights, Tower A Business Bay, Dubai United Arab Emirates PCN Coordinator: Babu Sajeesh Kumar T: +971 45546284 or +971 562428507 E: [email protected]

PSL 4 Issue 83

Page 3 of 15

dated 1st January 2017

EXAMINATION AVAILABILITY BY INDUSTRY/PRODUCT SECTOR AND NDT METHOD The headquarters location of the Authorised Qualifying Body is shown in bold type. Other locations where PCN examinations are permanently available are indicated as such. At all other examination centres, PCN examinations are available on a periodic or ad hoc basis. All initial contacts and requests for examination information should be direct to the Authorised Qualifying Body, at the address/telephone/email given in Table 1, unless alternative contact information is given under the examination centre location concerned.

African NDT Centre –(Durban) Suite 403 Block 4, Island Office Park 35-37 Island Circle Road Riverhorse Valley Durban, South Africa T: +27 126650566

U,R,RI,E1 ,M,P,V, WI

Apptrra Global AS Eiganesveien 14, 4008 Stavanger Norway PCN Coordinator: Ravindira C Dev T: +47 4558 6749 E: [email protected]

U(L2), RI(L2)

Page 4 of 15

M,P,V

M, P (Welds L2)

dated 1st January 2017

Tubes & Pipes

U,R,E1

In-service Inspection

BRS, RPS

African NDT Centre (PTY) Ltd 224 Witch-Hazel Avenue Highveld Techno Park, Centurion Pretoria, South Africa PCN Coordinator: Deborah Myburgh T: +27 (0) 12 6653248 F: +27 (0) 12 6654749 E: [email protected]

PSL 4 Issue 83

General (Multi-sector)

E1,P, M,U, R

Wrought Products

Welds

Railway

Aerospace Inspection Training, Units 9 & 10 Takeley Business Centre, Dunmow Road, Takeley, Stansted Airport, Bishop’s Stortford, Essex, CM22 6SJ Examinations permanently available PCN Coordinator: Jayn Lone T: +44(0)1279 870276 F: +44(0)1279 870751 E: [email protected]

Castings

E1 = eddy current; M = magnetic particle; P = penetrant; R = radiography; RI = radiographic interpretation; U = ultrasonic; CS = Critical Sizing V = visual testing; TOFD = Time of Flight Diffraction. U(pl) = Ultrasonic Thickness Measurement; ACFM = Alternating Current Field Measurement PA = Phased Array; Pl = plate testing WI = Welding Inspection H1 = Rail Axles H2 = Railway Rail; BRS = Basic Radiation Safety RPS = Radiation Protection Supervisor CRT = Computed Radiography, CRI = Computed Rad Interp

Aerospace

TABLE 2 - AUTHORISED QUALIFYING BODIES’ EXAMINATION CENTRES

U(TMCM) (L2)

A Star Training & Consultancy Pte Ltd #05-111, 18 Boon Lay Way Tradehub 21, Sinagapore, 609966 Examinations permanently available T: +65 6465 0877 F: +65 6875 0183 E: [email protected]

U, TOFD, RI (L2)

PA, M (L2) P (L2)

A-Star Training & Consultancy Pvt Ltd – India 47/11-1 Devadi Street, Mylapore Chennai, India 600004 T: +91 4424950082 E: [email protected]

U,RI, TOFD

M, P (Welds) PA

A-Star - Thailand 41/19 Sermsuwan Rd, T.Maptaphut A.Muangrayong, Rayong 21150 Thailand T: +66 3869115253 E: [email protected]

U(L2), TOFD(L2) , RI(L2)

PA (L2 welds), M(L2) welds, P(L2) welds

ATTAR – Advanced Technologies Testing and Research Unit 1, 64 Bridge Road Keysborough, Victoria Australia, 3173 PCN Coordinator: Mr P Grosser T: + 61 3 9574 6144 F: + 61 3 9574 6133 E: [email protected]

R, RI, U

M, P

PSL 4 Issue 83

Page 5 of 15

dated 1st January 2017

Tubes & Pipes

Array Training LTD International Base Unit 3 & 3A Greenwell Road East Tullos Aberdeen AB12 3AX T:+44 (0)1224243012 E: [email protected]

In-service Inspection

General (Multi-sector)

Wrought Products

Welds

Railway

Castings

E1 = eddy current; M = magnetic particle; P = penetrant; R = radiography; RI = radiographic interpretation; U = ultrasonic; CS = Critical Sizing V = visual testing; TOFD = Time of Flight Diffraction. U(pl) = Ultrasonic Thickness Measurement; ACFM = Alternating Current Field Measurement PA = Phased Array; Pl = plate testing WI = Welding Inspection H1 = Rail Axles H2 = Railway Rail; BRS = Basic Radiation Safety RPS = Radiation Protection Supervisor CRT = Computed Radiography, CRI = Computed Rad Interp

Aerospace

TABLE 2 - AUTHORISED QUALIFYING BODIES’ EXAMINATION CENTRES

M(L2), P(L2), BRS

Guided Ultrasonics Ltd Wavemaker House Unit e Brentwaters Business Park The Ham, Brentford, TW8 8HQ PCN Coordinator: Dr Mark Evans T: +44 (0) 845 6050227 F: +44 (0) 845 6050228 E: [email protected] IMechE Engineering Training Solutions 4 Europa View, Sheffield Business Park Sheffield, S9 1XH PCN Coordinator: Andy Kular T: +44 (0) 0114 3995720 F: +44 (0) 0114 2430035 E: [email protected] W: www.imeche.org/arl

GWT(L1)

E1, R, RI, U, CS, WI, TOFD

U,U(pl)

P,M,V, BRS, RPS, PA, CRT, CRI

IMechE Engineering Training Solutions (Array Training) Greenwell Road, Aberdeen, Scotland T: +44 (0)1224 243012 E: [email protected]

E1,RI,R,U

U,U(pl)

P,M,V, BRS, RPS

IMechE Engineering Training Solutions (NDT Ltd) Maltravers Road Sheffield T:0114 2727317 E: [email protected]

U

U, U(pl)

M,P

IMechE Engineering Training Solutions (South West School of NDT) Cardiff, Wales. Examinations permanently available. T: +44(0)2920 540000 F: +44(0)2920 540111

R,RI,U,W I

U

P,M,V, BRS, RPS

PSL 4 Issue 83

Tubes & Pipes

In-service Inspection

U(L2)

General (Multi-sector)

Wrought Products

Welds

BIT Inspection Technology No.11, 6th Pillaiyarkoil Street Ambal Nagar Ekkattuthangal Chennai, India, 600032 PCN Coordinator: Rajamanickam Baskar T: +91 9840800863 E: [email protected]

Railway

Castings

E1 = eddy current; M = magnetic particle; P = penetrant; R = radiography; RI = radiographic interpretation; U = ultrasonic; CS = Critical Sizing V = visual testing; TOFD = Time of Flight Diffraction. U(pl) = Ultrasonic Thickness Measurement; ACFM = Alternating Current Field Measurement PA = Phased Array; Pl = plate testing WI = Welding Inspection H1 = Rail Axles H2 = Railway Rail; BRS = Basic Radiation Safety RPS = Radiation Protection Supervisor CRT = Computed Radiography, CRI = Computed Rad Interp

Aerospace

TABLE 2 - AUTHORISED QUALIFYING BODIES’ EXAMINATION CENTRES

RI,U, R

Page 6 of 15

U(TMCM) (L2)

dated 1st January 2017

R,RI,U, WI

U

P,M,V, BRS, RPS

IMechE Engineering Training Solutions (Ruane-Tati) Terengganu, Malaysia. Examinations permanently available. T: 0060 9 8641044 F: 0060 9 8641043

RI,U, WI

U(pl)

P,M,V, BRS, RPS

IMechE Engineering Training Solutions (MINDT) Kuala Lumpar, Malaysia. Examinations permanently available. T: 0060 3 6280 3448 F: 0060 3 6280 0084 Email : [email protected]

RI,U, WI, P, M

U(pl)

V, BRS, RPS

IMechE Engineering Training Solutions ANDTC, South Africa Examinations permanently available. T: 0027 12665 3248 Email : [email protected]

R, RI,U, WI

P,M

IMechE Engineering Training Solutions Decibel NDE, 1st Floor-Plainfield Near Civil Court, Main Road, Pattambi Palakad District, Kerala, India 679303 T: 0091 466 2214333/0091 808 9000250 Email: [email protected]

WI,U,RI

P,M

IMechE Engineering Training Solutions Advanced Industrial Solutions (AIS) 8 Jupiter Court, Tyne Tunnel Trading Estate Newcastle-upon-Tyne, NE29 7SE Contact: Eve Roberts T: 0845 2571204

WI,RI,U( pl),E1,U

P,M.

IMechE Engineering Training Solutions (IINDT) Trikarsa Equalita, Block C No.12 Sei Panas, Batam, Indonesia 29433 Contact: Brillian Wiraprima Sardi T: +62 778472122 E: [email protected]

P,M,U,RI

PSL 4 Issue 83

Page 7 of 15

dated 1st January 2017

Tubes & Pipes

IMechE Engineering Training Solutions (Fife College) Future Skills Centre, Stenton Road, Glenrothes, Fife Scotland KY6 2RA T: +44(0)1592 568534 F: +44(0)1592 568535

In-service Inspection

General (Multi-sector)

Wrought Products

Welds

Railway

Castings

E1 = eddy current; M = magnetic particle; P = penetrant; R = radiography; RI = radiographic interpretation; U = ultrasonic; CS = Critical Sizing V = visual testing; TOFD = Time of Flight Diffraction. U(pl) = Ultrasonic Thickness Measurement; ACFM = Alternating Current Field Measurement PA = Phased Array; Pl = plate testing WI = Welding Inspection H1 = Rail Axles H2 = Railway Rail; BRS = Basic Radiation Safety RPS = Radiation Protection Supervisor CRT = Computed Radiography, CRI = Computed Rad Interp

Aerospace

TABLE 2 - AUTHORISED QUALIFYING BODIES’ EXAMINATION CENTRES

Lavender International NDT Consultancy Services Ltd Unit 7 Penistone Station, Sheffield S36 6HP Examinations permanently available. T: +44(0)1226 765769 F: +44(0)1226 760707 E: [email protected]

R,RI, U,

E1,R, RI,U, CS, TOFD, ACFM,WI

E1,U, U(pl)

P,M,V, PA, BRS, RPS, CRT,

U(TMCM) (L2)

Lavender International NDT Consultancy Services Ltd TQCC, Z Pigis 51, 38222 Volos Magnisia, Greece Examinations permanently available. T: +30 421 59881 F: +30 421 59885 E: [email protected]

R,RI, U

E1,R, RI, U,CS, TOFD, WI, ACFM

E1,U, U(pl)

P,M,V, PA,BRS , RPS,

U(TMCM) (L2)

Lavender International NDT Consultancy Services Ltd, USA LLC 15200 Middlebrook Dr.Ste.F Houston, Texas 77058 T: + 001 281 913 9064 E: [email protected]

R,RI, U

U, E1,TOFD, CS, R,RI, ACFM

U, U(pl),E1

PA, BRS, RPS,M, P,V,

U(TMCM) (L2)

Lavender International NDT Consultancy Services Ltd, (Oceaneering). Bowesfield Lane, Stockton, TS18 3HF Examinations permanently available. T: +44 (0)1642 604661 E: [email protected]

R,RI, U

U,TOFD, CS,RI,R,E 1, ACFM,

U,U(pl),E 1

M,P,V, PA,BRS , RPS,

U(TMCM) (L2)

Lavender International NDT Consultancy Services Ltd 454 Victoria Road, Malaga Western Australia, Perth, 6090 Examinations permanently available. T: +61 (8) 92496005 E: [email protected]

R,RI, U

U,TOFD, CS,RI,R,E 1, ACFM

U,U(pl),E 1

M,P,V, PA,BRS , RPS,

U(TMCM) (L2)

PSL 4 Issue 83

Page 8 of 15

dated 1st January 2017

Tubes & Pipes

In-service Inspection

General (Multi-sector)

Wrought Products

Welds

Railway

Castings

E1 = eddy current; M = magnetic particle; P = penetrant; R = radiography; RI = radiographic interpretation; U = ultrasonic; CS = Critical Sizing V = visual testing; TOFD = Time of Flight Diffraction. U(pl) = Ultrasonic Thickness Measurement; ACFM = Alternating Current Field Measurement PA = Phased Array; Pl = plate testing WI = Welding Inspection H1 = Rail Axles H2 = Railway Rail; BRS = Basic Radiation Safety RPS = Radiation Protection Supervisor CRT = Computed Radiography, CRI = Computed Rad Interp

Aerospace

TABLE 2 - AUTHORISED QUALIFYING BODIES’ EXAMINATION CENTRES

Lavender International NDT Consultancy Services Ltd Technology Centre Advanced Manufacturing Park Brunel Way, Catcliffe Rotherham S60 5WG Exams permanently available

U

U,TOFD, CS

U,U(pl)

PA

U(TMCM) (L2)

Lavender International NDT Consultancy Services Ltd Non-Destructive Academy of South Africa 3 Pastoll Road, Pinetown Sarnia, 3610 Durban South Africa T: +27 (0) 317083433 E: [email protected]

R,RI, U,

E1,R, RI,U, CS, TOFD, ACFM,WI

E1,U, U(pl)

P,M,V, PA, BRS, RPS, CRT,

U(TMCM) (L2)

Lavender International NDT Consultancy Services Ltd Ultramag Inspection Services Ltd Unit 4V, Central Crescent Marchwood Industrial Park Southampton, SO40 4BJ T: 023 80861010 E: [email protected]

E1,RI,U, WI

P,M,V, BRS, RPS

Lavender International NDT Consultancy Services Ltd Quality Control Council of Canada (QCCC) 10250-176 Street Edmonton, AB, Canada T5S 1L2 T: 1 780 9039802 E: [email protected]

TOFD

PA

Lavender International NDT Consultancy Services Ltd TQCC, G Papandreou 150 Metamorfosi , Athens, Greece T: +30 211 0127928 E: [email protected] [email protected]

E1,R, RI,U, TOFD, WI

PSL 4 Issue 83

Page 9 of 15

U(pl)

P,M,V, PA, BRS, RPS,

dated 1st January 2017

Tubes & Pipes

In-service Inspection

General (Multi-sector)

Wrought Products

Welds

Railway

Castings

E1 = eddy current; M = magnetic particle; P = penetrant; R = radiography; RI = radiographic interpretation; U = ultrasonic; CS = Critical Sizing V = visual testing; TOFD = Time of Flight Diffraction. U(pl) = Ultrasonic Thickness Measurement; ACFM = Alternating Current Field Measurement PA = Phased Array; Pl = plate testing WI = Welding Inspection H1 = Rail Axles H2 = Railway Rail; BRS = Basic Radiation Safety RPS = Radiation Protection Supervisor CRT = Computed Radiography, CRI = Computed Rad Interp

Aerospace

TABLE 2 - AUTHORISED QUALIFYING BODIES’ EXAMINATION CENTRES

U(L1,L2)

NDT International PTE Limited 24A, Sannadhi Street, Kamakshi Nagar, Valasaravakkam, Chennai - 87. Contact: G Venkataraman T: +91 44 32999936 Mobile: +91 9840393344 E: [email protected] www.ndtinternational.org

U, TOFD, RT, E1

NDT International (Vizag) D No:31-29-22/1, Santhamamidi Thota Street Vadlapudi Post, Kurmannapalem Vishakhapatnam, opp. Vizag Steel Plant Main Gate, India Contact: G Narayanaswamy T:+0891 2543637 E: [email protected]

U, TOFD, RT, E1

P, M, PA, BRS

NDT International (Singapore) 61 Bukit Batok Crescent Heng Loong Building #07-05 Singapore Contact: G Venkataraman T:+6562 1724 E: [email protected]

U, TOFD, RT, E1

P, M, PA, BRS

NDT International (Trichy) Sri Venkatachalapathy Modern Rice Mills 6 Ambethkar Street Oil Mill Road, Ariyamangalam Trichy, India, 620010 Contact: Sivaramakrishnan T:+9843083040 E: [email protected]

U, TOFD, RT, E1

P, M, PA, BRS

PSL 4 Issue 83

Page 10 of 15

P(L2), M(L2)

E1,U

P, M, PA, BRS

dated 1st January 2017

Tubes & Pipes

NDE Institute of Trinidad Ltd 15 Robertson Street Les Efforts East San Fernando Trinidad, West Indies PCN Coordinator: Alan St George T: + 868 6539343 E: [email protected]

In-service Inspection

General (Multi-sector)

Wrought Products

Welds

Railway

Castings

E1 = eddy current; M = magnetic particle; P = penetrant; R = radiography; RI = radiographic interpretation; U = ultrasonic; CS = Critical Sizing V = visual testing; TOFD = Time of Flight Diffraction. U(pl) = Ultrasonic Thickness Measurement; ACFM = Alternating Current Field Measurement PA = Phased Array; Pl = plate testing WI = Welding Inspection H1 = Rail Axles H2 = Railway Rail; BRS = Basic Radiation Safety RPS = Radiation Protection Supervisor CRT = Computed Radiography, CRI = Computed Rad Interp

Aerospace

TABLE 2 - AUTHORISED QUALIFYING BODIES’ EXAMINATION CENTRES

U(L1,L2), RI(L1,L2)

P(WL1, L2), M(WL1 ,L2)

NDT International (Cochin) Irimpan’s Angel Rudhy Tower, Opposite to St.Joseph High School Angamaly, Cochin India, 683572 T: +91 8943512550 E: [email protected]

U(L2), RI(L2)

P(WL2) M(WL2

NDT International (Kolkata, Sagnik NDE) Adarsha Pally, Near Water Pump Kolkata, West Bengal India, 700051 Contact: Suman Dey T: +91 8335816359 E: [email protected]

U(L2), RI(L2)

P(WL2) M(WL2

NDT International (Saudi Arabia) PO Box 30879 Al Khobar 31952 Saudi Arabia Contact: Jamsheed Salahudeen T: +966 138029031 E: [email protected]

U(L2), RI(L2)

P(WL2) M(WL2

Noble Quality Evaluation Private Limited., FAO: Ramesh Narayanasamy Plot 20 & 21, Anjaneya Nagar (Near MIET) via Trichy Airport, Gundur, Tiruchirapalli, Tamil Nadu – 620 007, India PCN Coordinator: N Ramesh T: + 91 8220954947 / +91 8754042871 E: [email protected] W: www.nobleqe.com

U, RI(L2)

M(L2), P(L2)

PSL 4 Issue 83

Page 11 of 15

dated 1st January 2017

Tubes & Pipes

NDT International (Mumbai) 602 Akshar Building, Blue Chip Corporate Park, Plot No D-263 MIDC, Turbhe Naka, Navi Mumbai, (New Mumbai), India 400705 Contact: Venkaiah Vanka T:+919987563012 E: [email protected]

In-service Inspection

General (Multi-sector)

Wrought Products

Welds

Railway

Castings

E1 = eddy current; M = magnetic particle; P = penetrant; R = radiography; RI = radiographic interpretation; U = ultrasonic; CS = Critical Sizing V = visual testing; TOFD = Time of Flight Diffraction. U(pl) = Ultrasonic Thickness Measurement; ACFM = Alternating Current Field Measurement PA = Phased Array; Pl = plate testing WI = Welding Inspection H1 = Rail Axles H2 = Railway Rail; BRS = Basic Radiation Safety RPS = Radiation Protection Supervisor CRT = Computed Radiography, CRI = Computed Rad Interp

Aerospace

TABLE 2 - AUTHORISED QUALIFYING BODIES’ EXAMINATION CENTRES

Page 12 of 15

U, R, RI, TOFD,

U(L3 no practical) , U(pl)

P, M, V,BRS, RPS, PA

R,RI,U

P,M, BRS, RPS, PA

U,RI, TOFD,(all L2)

PA(L2)

dated 1st January 2017

Tubes & Pipes

E1,P, M,R, U

M(L2)

In-service Inspection

U, R

Smart Technocrats & Consultancy Services (I) PVT Ltd Plot No.05, Sector 18a, Nerul (W) Navi Mumbai Maharashtra, India 400706 PCN Coordinator: Sunil Mukul T: 00 91 227706055 F: 00 91 227713643 E: [email protected]

PSL 4 Issue 83

M(L2), P(L2)

U H1, H2

SGS NDT Training & Examination Centre, 2F, Building 8, No. 69, 1159 East Kangqiao Rd, Pudong District, Shanghai 201319, China. Exams permanently available T: +86 (0)21 6818 3904 F: +86 (0)21 6818 3265 E: [email protected]

General (Multi-sector)

U,RI(L2)

Serco Limited, Stephenson House, Railway Technical Centre, London Road, Derby DE24 8UP Examinations permanently available. T: +44(0)1332 264782 F: +44(0)1332 264965 E: [email protected]

Singapore Welding Society c/o SETSCO Services PTE Ltd, 18 Teban Gardens Crescent, Singapore 608925 Examinations permanently available. T: 0065 566 7777 F: 0065 566 7718 E: [email protected]

Wrought Products

Royal Tech Training & Consultancy Plot No. A75, Opp Petrol Pump, Vuda Colony Gopalapatnam, Vishakapatnam Andhra Pradesh India 530027 PCN Coordinator: Rajasuhas T: + 918916524882 F: + 918916524008 E: [email protected]

Welds

Railway

Castings

E1 = eddy current; M = magnetic particle; P = penetrant; R = radiography; RI = radiographic interpretation; U = ultrasonic; CS = Critical Sizing V = visual testing; TOFD = Time of Flight Diffraction. U(pl) = Ultrasonic Thickness Measurement; ACFM = Alternating Current Field Measurement PA = Phased Array; Pl = plate testing WI = Welding Inspection H1 = Rail Axles H2 = Railway Rail; BRS = Basic Radiation Safety RPS = Radiation Protection Supervisor CRT = Computed Radiography, CRI = Computed Rad Interp

Aerospace

TABLE 2 - AUTHORISED QUALIFYING BODIES’ EXAMINATION CENTRES

U(L2), TOFD(L2) , E1(L2), CS

U(pl)(L2)

M(L2), P(L2), PA(L2)

TCS NDT 53 Prosperity Avenue Wangara, Western Australia, 6065 T:+61 (0)415 573095 E: [email protected]

U, TOFD, E1, (L2), CS

U(pl) (L2)

M,P, PA (L2)

TCS NDT Central Institute of Technology Perth Campus-Building 2 30 Averdeen Street, Northbridge Perth, Western Australia 6003 T:+61 (0)415 573095 E: [email protected]

U, TOFD, E1, (L2), CS

U(pl) (L2)

M,P, PA (L2)

TÜV Rheinland Sonovation BV Elschot 30, 4905 AZ Oosterhout The Netherlands PCN Coordinator: Erik van der Spek T: +31 (0)162 425588 F: +31 (0)162 424343 E: [email protected] [email protected] Website: www.tuv.com/andt

TOFD(L2)

PSL 4 Issue 83

Page 13 of 15

PA (L2)

dated 1st January 2017

Tubes & Pipes

General (Multi-sector)

TCS NDT 19 Weymouth Boulevard Quinns Rocks Western Australia 6030 PCN Coordinator: Alisa Hewling T:+61 (0)415 573095 E: [email protected]

(Talon)Units 1 & 2 Keystone Court, Hallam Way, Whitehills Business Park, Blackpool, FY4 5NZ T: +44 (0) 1253696400 [email protected]

In-service Inspection

Wrought Products

Welds

M(L2), P(L2), BRS

Talon NDT Ltd, Unit 9 Murcar Commercial Park, Denmore Road Bridge of Don, Aberdeen AB23 8JW PCN Coordinator: Ian Judge T: 01224 822251 E: [email protected]

Railway

Castings

U(pl)(L2)

E1 = eddy current; M = magnetic particle; P = penetrant; R = radiography; RI = radiographic interpretation; U = ultrasonic; CS = Critical Sizing V = visual testing; TOFD = Time of Flight Diffraction. U(pl) = Ultrasonic Thickness Measurement; ACFM = Alternating Current Field Measurement PA = Phased Array; Pl = plate testing WI = Welding Inspection H1 = Rail Axles H2 = Railway Rail; BRS = Basic Radiation Safety RPS = Radiation Protection Supervisor CRT = Computed Radiography, CRI = Computed Rad Interp

Aerospace

U(L2), E1(L2)

TABLE 2 - AUTHORISED QUALIFYING BODIES’ EXAMINATION CENTRES

E1,

P,M, BRS, RPS, VT

E1,RI,U, CS, TOFD

E1,U, U(pl)

V, BRS, RPS, PA, CRI, M,P,

E1, RI,U, TOFD

E1,U, U(pl)

P,M,V, BRS, RPS, CRI, PA

TWI Technology & Training Centre (North East) Ferrous Road, Riverside Park, Middlesbrough, TS2 1DJ Examinations permanently available. T: +44 (0)1642 216320 F: +44 (0)1642 252218 E: [email protected]

E1,P, M,R, U

R,RI,U,

E1,U,

P,M,V, BRS, RPS, CRT

TWI Examination Centre, South East Asia, No.1 Jalan Utarid U5/13 Section U5, 40150 Shah Alam, Selangor Darul Ehsan, Malaysia Examinations permanently available. T: +60 3 7848 1000 E: [email protected]

E1,P, M,U

RI,U, TOFD

E1,

P,M,V, PA

TWI India PVT Ltd 78 Chamiers Road, Nandanam Chennai, India 600018 Contact: Jim Kerins T: +91 (0)44 43189691/2/3/4 E: [email protected]

PSL 4 Issue 83

U,TOFD, E1

Page 14 of 15

P,M,PA BRS, RPS

dated 1st January 2017

Tubes & Pipes

TWI Examination Centre, Aberdeen Examinations permanently available T: +44 (0) 1224 691222 F: +44 (0) 1224 684976

U

WI, U, R, RI

In-service Inspection

RI

General (Multi-sector)

E1,U, M,P

Wrought Products

The Welding Institute (TWI) Granta Park, Great Abington, Cambridge CB21 6AL Examinations permanently available. T: +44 (0)1223 899500 E: [email protected]

Welds

E1,P, M,R, U

Railway

The South West School of NDT, Merton House, Croescadarn Close, Pentwyn, Cardiff CF23 8HF Examinations permanently available. T: +44(0)2920 540000 F: +44(0)2920 540111 E: [email protected] [email protected]

Castings

E1 = eddy current; M = magnetic particle; P = penetrant; R = radiography; RI = radiographic interpretation; U = ultrasonic; CS = Critical Sizing V = visual testing; TOFD = Time of Flight Diffraction. U(pl) = Ultrasonic Thickness Measurement; ACFM = Alternating Current Field Measurement PA = Phased Array; Pl = plate testing WI = Welding Inspection H1 = Rail Axles H2 = Railway Rail; BRS = Basic Radiation Safety RPS = Radiation Protection Supervisor CRT = Computed Radiography, CRI = Computed Rad Interp

Aerospace

TABLE 2 - AUTHORISED QUALIFYING BODIES’ EXAMINATION CENTRES

dated 1st January 2017

Tubes & Pipes

P,M,V, BRS

In-service Inspection

U

General (Multi-sector)

R, RI,U,WI

Wrought Products

Page 15 of 15

Welds

PSL 4 Issue 83

R,RI, U

Railway

Wens Technical & Occupational Skills Training LLC PO Box 393179, Unit 2F-A-02 Empire Heights, Tower A Business Bay, Dubai United Arab Emirates PCN Coordinator: Babu Sajeesh Kumar T: +971 45546284 or +971 562428507 E: [email protected]

Castings

E1 = eddy current; M = magnetic particle; P = penetrant; R = radiography; RI = radiographic interpretation; U = ultrasonic; CS = Critical Sizing V = visual testing; TOFD = Time of Flight Diffraction. U(pl) = Ultrasonic Thickness Measurement; ACFM = Alternating Current Field Measurement PA = Phased Array; Pl = plate testing WI = Welding Inspection H1 = Rail Axles H2 = Railway Rail; BRS = Basic Radiation Safety RPS = Radiation Protection Supervisor CRT = Computed Radiography, CRI = Computed Rad Interp

Aerospace

TABLE 2 - AUTHORISED QUALIFYING BODIES’ EXAMINATION CENTRES