- 05 EX WIRELESS PS3 QUICK SETUP GUIDE

Page 1 of 6

Set Up

CHARGING THE WIRELESS CONTROL BOX 2

1

HEADSET CONNECTOR

3

The Wireless Control Box contains a rechargeable Lithium-ion battery. It is strongly recommended to fully charge the battery for 3 hours before first use. 1 To charge the Wireless Control Box plug the mini jack connector (of the supplied mini jack to USB cable) into the socket on the ‘game’ side of the Wireless Control Box. 2 Plug the USB connector into a spare USB port on your PS3. 3 The LED will glow red when charging. (Note: the PS3 must be turned on and not in standby mode for the headset to charge).

Page 2 of 6

Set Up

PLAYSTATION 3 WITH A/V CABLES (Without HDMI)

AV MULTI OUT

USB

2

5

AV RCA CABLE (Supplied with PS3 console)

1

YELLOW/ VIDEO TV/MONITOR INPUTS

4

3

You need the following cable for this set up option: 1. AV RCA CABLE (which came with the console)

1 Connect the AV RCA Cable into the back of your PS3 console. 2 Plug the USB connector attached to the Gioteck Wireless Receiver into an available USB port on the front of your PS3 Console. 3 Connect the Mini Jack end of the provided RCA/Mini Jack Cable into the corresponding socket on the Gioteck Wireless Receiver. 4 Connect the AV RCA Cables RED/WHITE plugs into the corresponding sockets of the RCA/Mini Jack Cable coming from the Gioteck Wireless Receiver. 5 Plug the yellow AUDIO connector into the Video IN socket of your TV/Monitor. 6 Turn on your console and make sure that your controller is wirelessly connected to your console (do not leave the controller charging or it may transfer electrical noise into your headset)

Page 3 of 6

Set Up

PAIRING THE WIRELESS CONTROL BOX

A

7

HEADSET CONNECTOR

B

8

7 Turn the Wireless Control Box ON (The power switch is on the ‘game’ side of the Wireless Control Box). 8 Press and hold the mute button for 5 seconds. 9 The Wireless Receiver (A) and Wireless Control Box (B) LEDs will flash repeatedly until paired – solid LED. 10 Go to Settings > Accessory Settings > Audio Device Settings and select EX-05 Headset (which will appear in the drop down menu) for both the Input and Output. You will be able to hear yourself talking into the microphone through the headset earcups. Set the desired volume level. 11 Go to Settings > Sound Settings > Audio Output Settings, choose Audio Input Connector/ Scart / AV Multi.

Page 4 of 6

Set Up

PLAYSTATION 3 WITH HDMI CABLE (HDMI Option 1)

HDMI OUTPUT

AV MULTI OUT USB

3

1 HDMI CABLE (NOT Supplied)

2

AV RCA CABLE (Supplied with PS3 console)

4 5

TV/MONITOR HDMI INPUT

You need the following cables for this set up option:

1. AV RCA CABLE (which came with the console) 2. HDMI CABLE (not supplied)

1 2 3 4 5

Connect the HDMI lead between the PS3 and your TV/Monitor. Connect the AV RCA cable into the back of your PS3. Plug the USB connector attached to the Gioteck Wireless Receiver into an available USB port on the front of your PS3 Console. Connect the Mini Jack end of the provided RCA/Mini Jack Cable into the corresponding socket of the Gioteck Wireless Receiver. Connect the AV RCA Cables RED/WHITE plugs into the corresponding sockets of the RCA/Mini Jack Cable coming from the Gioteck Wireless Receiver.

Page 5 of 6

Set Up

PAIRING THE WIRELESS CONTROL BOX

A

6

HEADSET CONNECTOR

B

7

6 Turn the Wireless Control Box ON (The power switch is on the ‘game’ side of the Wireless Control Box). 7 Press and hold the mute button for 5 seconds. 8 The Wireless Receiver (A) and Wireless Control Box (B) LEDs will flash repeatedly until paired – solid LED. 9 Go to Settings > Accessory Settings > Audio Device Settings and select EX-05 Headset (which will appear in the drop down menu) for both the Input and Output. You will be able to hear yourself talking into the microphone through the headset earcups. Set the desired volume level. 10 Go to Settings > Sound Settings > Audio Output Settings, choose Audio Input Connector/ Scart / AV Multi.

Page 6 of 6

Set Up

PLAYSTATION 3 WITH HDMI CABLE (HDMI Option 2) HDMI OUTPUT USB

5 1 HDMI CABLE (NOT Supplied)

2

RED

WHITE

TV / MONITOR HDMI INPUT

TV / MONITOR AUDIO OUT

You need the following cable for this set up option: 1. HDMI CABLE (not supplied) N.B. Your TV/monitor will need to have Audio Out (RED/WHITE) sockets. Most, but not all TVs/ Monitors have RED/WHITE Audio IN and YELLOW Video IN sockets but not all TV’s,and even fewer monitors have RED/WHITE Audio OUT sockets!

1 Connect the HDMI lead between your PS3 Console and TV/Monitor. 2 Plug the USB connector attached to the Gioteck Wireless Receiver into an available USB port on the front of your PS3 Console. 3 Connect the Mini Jack end of the provided RCA/Mini Jack Cable into the corresponding socket of the Gioteck Wireless Receiver. 4 Plug the RED/WHITE connectors (from the Mini Jack Cable coming from the Gioteck Wireless Receiver) into the Audio OUT RED/WHITE sockets on your TV/Monitor Please note that you may need to make some adjustments to your TV/Monitor’s settings to enable the audio to come through the headset (Consult your TV manual) Then proceed as HDMI Option 1, Instructions 6 – 10.