ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:45 AM Page 1
Edition 6 / 2014
ETIII SA Implant System
HIOSSEN Inc. www.hiossen.com 85 Ben Fairless Dr., Fairless Hills, PA 19030, USA TEL : 1-888-678-0001 FAX : 1-267-759-7004
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:46 AM Page 2
ETIII SA Implant System
For more information visit www.hiossen.com
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:46 AM Page 3
SA Surface
What is Hiossen’s SA Surface?
SA
x 2K
x 2K
x 4K
x 4K
RBM
S A stands for Sand blasted and Acid etched. When compared with traditional RBM surface treatment methods, Hiossen’s SA surface has shown a 45% improvement in available surface area. Additionally, Hiossen’s proprietary SA surface treatment has shown a substantial quickening of the gene expression, cell differentiation, and proliferation that are central to osseointegration. What does this mean for your patients? 3 Faster bone healing: 20% Faster than traditional RBM surface treatment 3 Earlier loading times: As soon as 6 weeks after implant placement
1
ETIII SA Implant System Catalog
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:46 AM Page 4
ETIII SA Implant ETIII SA
Key Design Features of the Hiossen ETIII SA Implant
• Self-sealing 11° Morse taper joins the abutment to the implant • Hermetic seal minimizes micro movement reducing percolation of saliva & bacteria • Slightly smaller abutment diameter keeps the interface away from the bone • Aggressive self threading design • Lower sensitivity to drill size • Maintains implant path
• Self-tapping • Ability for path change • Secure initial stability
ET III SA Implant
2
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:47 AM Page 5
ETIII SA Implant ETIII SA Fixtures ETIII SA Fixtures come in four different diameters (Ø3.5, Ø4.0, Ø4.5 and Ø5.0), and are available in both no-mount and pre-mounted configurations (Fixture + Mount + Cover screw). ETIII SA UW Fixtures come in two different diameters (Ø6.0, Ø7.0). They are available in pre-mounted configuration only.
Pre-Mounted Fixture (Simple Mount) Fixture + Mount + Cover Screw : A + Product Code (Ex:AET3R4011S)
Hex 1.2
Hex 1.2
ET III SA Fixture Ø3.5
ET III SA Fixture Ø4.0, Ø4.5, Ø5.0
Hex 1.2
ET III SA UW Fixture Ø6.0, Ø7.0
No Mount Fixture Fixture : + Cover Screw : C + Product Code (Ex:CET3R4011S)
Ø3.5
3
ETIII SA Implant System Catalog
Ø4.0
Ø4.5
Ø5.0
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:47 AM Page 6
ETIII SA
ETIII SA Fixture's internal connection come in two different sizes. Mini fixtures (Ø3.5) has a 2.1mm internal connection and Regular fixtures (Ø4.0, Ø4.5, Ø5.0) has a 2.5mm internal connection. Mini Fixtures (Ø3.5) only accept abutments color coded in yellow and Regular Fixtures (Ø4.0, Ø4.5, Ø5.0) accept all abutment color coded in green.
Hex 2.1
Hex 2.5
2.8 Hex depth
2.8 Hex depth
Mini connection
Cover Screw
Regular connection
Color
Purple
Green
Fixture
3.5mm
4.0mm, 4.5mm, 5.0mm
Code
Discontinued
GSCS40S-G/GSCS40S-B
Packing unit: cover screw Use a long cover screw when fixture is implanted under the bone level 1.2 hex driver Tightening torque: 5~8Ncm
0.4mm
Mini
Regular
ET III SA Implant
4
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:47 AM Page 7
ETIII SA Implant ETIII SA Fixtures
M
S Hex 2.1
Hex 2.5
Diameter Ø3.5 D
L
8.5mm
10mm
11.5mm
Regular
13mm
Connection
Mini
Diameter
Ø3.5
Length (mm)
Mini
8.5 10
ET3M3510S
11.5
ET3M3511S
13
ET3M3513S
15
ET3M3515S
15mm
Connection
Diameter Ø4.0
Diameter
L
8.5mm
10mm
Regular
11.5mm
13mm
Length (mm)
D
7mm
Ø4.0 7
ET3R4007S
8.5
ET3R4008S
10
ET3R4010S
11.5
ET3R4011S
13
ET3R4013S
15
ET3R4015S
Connection Diameter
10mm
Regular
11.5mm
13mm
Length (mm)
L
Ø4.5 7
ET3R4507S ET3R4508S
10
ET3R4510S
11.5
ET3R4511S
13
ET3R4513S
15
ET3R4515S
15mm
Connection
Diameter Ø5.0
Diameter
L
5
8.5mm
10mm
11.5mm
ETIII SA Implant System Catalog
13mm
15mm
Length (mm)
D
7mm
Regular
8.5
D
8.5mm
Regular
15mm
Diameter Ø4.5
7mm
ET3M3508S
Regular Ø5.0
7
ET3R5007S
8.5
ET3R5008S
10
ET3R5010S
11.5
ET3R5011S
13
ET3R5013S
15
ET3R5015S
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:47 AM Page 8
Drilling Sequence for ETIII - Taper Drill *ETIII Implants require the Taper Kit (HTAPEK)
ETIII SA
Ø3.5 Fixture ( Length :10mm )
Bone Quality
Ø2.2 Drill
Ø3.0 Drill
Ø3.5 Taper Drill
Ø3.5 Taper Cortical Driill
Soft Normal Hard
Ø3.5 Fixture Implant Placement
Ø4.0 Fixture ( Length :10mm )
Bone Quality
Ø2.2 Drill
Ø3.5 Taper Drill
Ø4.0 Taper Drill
Ø4.0 Taper Cortical Driill
Soft Normal Hard
Ø4.0 Fixture Implant Placement
Ø4.5 Fixture ( Length :10mm )
Bone Quality
Ø2.2 Drill
Ø3.5 Taper Drill
Ø4.0 Taper Drill
Ø4.5 Taper Drill
Soft Normal Hard
Ø4.5 Taper Cortical Driill Ø4.5 Fixture Implant Placement
Ø5.0 Fixture ( Length :10mm )
Bone Quality Soft Normal Hard
Ø2.2 Drill
Ø3.5 Taper Drill
Ø4.5 Taper Drill
Ø5.0 Taper Drill
Ø5.0 Taper Cortical Driill Ø5.0 Fixture Implant Placement
ET III SA Implant
6
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:47 AM Page 9
ETIII UW Implant ETIII SA UW Fixtures Regular
Connection
Diameter Ø6.0
Regular
Diameter Ø6.0
Length (mm)
D
L
7.0mm
8.5mm
10mm
11.5mm
AET3R6007S
8.5
AET3R6008S
10
AET3R6010S
11.5
AET3R6011S
13
AET3R6013S
13mm
Diameter Ø7.0
Regular
Ø6.0 7
Connection
Regular
Diameter Length (mm)
Ø6.8 D
L
7.0mm
8.5mm
10mm
11.5mm
Ø7.0 7
AET3R7007S
8.5
AET3R7008S
10
AET3R7010S
11.5
AET3R7011S
13
AET3R7013S
13mm
Drilling Sequence for ETIII UW - Taper Drill *ETIII UW Implants require the Ultra Kit (HULTRK)
Ø6.0 Fixture ( Length :10mm )
Bone Quality
Ø2.0 Drill
Ø2.0/3.0 Pilot Drill
Ø3.0 Drill
Ø3.0/3.8 Pilot Drill
Ø3.8 Drill
Ø4.6 Drill
Soft Normal Hard
Ø5.2 Direct Drill
Ø5.5 Ø6.0 Direct Drill Cortical Drill
Ø6.0 Fixture
Implant Placement
Ø7.0 Fixture ( Length :10mm )
Bone Quality Soft Normal Hard
7
ETIII SA Implant System Catalog
Ø2.0 Drill
Ø2.0/3.0 Pilot Drill
Ø3.0 Drill
Ø3.0/3.8 Pilot Drill
Ø3.8 Drill
Ø4.6 Drill
Ø6.5 Ø5.5 Ø6.2 Ø7.0 Ø7.0 Direct Drill Direct Drill Direct Drill Cortical Drill Fixture
Implant Placement
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:47 AM Page 10
Healing Abutment Prosthetic Components
Healing Abutment Mini connection 1.2
Mini
1.2
H
3.0
4.0
5.0
7.0
Ø4.0
4003M
4004M
4005M
4007M
Ø4.5
4503M
4504M
4505M
4507M
D
Ø4.0
Ø4.5
H
Fixture Level
Regular connection 1.2
1.2
1.2
Regular
1.2
H
3.0
4.0
5.0
7.0
Ø4.0
4003R
4004R
4005R
4007R
Ø5.0 Ø6.0 Ø7.0
5003R 6003R 7003R
5004R 6004R 7004R
5005R 6005R 7005R
5007R 6007R 7007R
D
Ø4.0
Ø5.0
Ø6.0
Ø7.0
• Order
Code : ETHLA + item code ex) ETHLA + 4503M = ETHLA4503M • Use a 1.2 hex driver • Packing unit : Healing abutment • Tightening torque : Hand tightening (less than 10Ncm)
H
Fixture Level
Healing Abutment Selection Guide Healing ABT. (H)
3
4
5
7
Abutment (G/H)
1
2 or 3
3 or 4
more than 5
Prosthetic Components
8
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:47 AM Page 11
Transfer Abutment
Transfer Abutment Cement retained restoration H
Mini
1.2
D
4.5mm
Type G/H
4.5mm 5.5 H G/H
Hex
Non-Hex
1.0
4515MHW
4515MNW
2.0
4525MHW
4525MNW
3.0
4535MHW
4535MNW
4.0
4545MHW
4545MNW
5.0
4555MHW
4555MNW
Fixture Level
Hex
Non-Hex
1.2
D
H
5.0mm H G/H
5.5
Fixture Level
Hex
5.0mm
Type G/H
Non-Hex
Hex
Non-Hex
1.0
5015MHW
5015MNW
2.0
5025MHW
5025MNW
3.0
5035MHW
5035MNW
4.0
5045MHW
5045MNW
5.0
-
-
• Order
code : HGTFA + item code ex) HGTFA + 4515MHW = HGTFA4515MHW • Used for making general cement-type prosthesis • 11° taper connection enhances safety • Gingival gold color for aesthetic effect • Cross-section design prevents prosthesic restoration • Used with 1.2 hex driver • Tightening torque: 20Ncm (mini), 30Ncm (Regular) Includes EbonyGold abutment screw
Regular 1.2
D
4.5mm H H G/H Fixture Level
Hex
5.5
Non-Hex
• Order
4.5mm
D G/H
Hex
Non-Hex
1.0
4515SHW
4515SNW
2.0
4525SHW
4525SNW
3.0
4535SHW
4535SNW
4.0
4545SHW
4545SNW
5.0
4555SHW
4555SNW
code : HGTFA + item code ex) HGTFA + 4515SHW = HGTFA4515SHW
9
ETIII SA Implant System Catalog
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:47 AM Page 12
Prosthetic Components
Transfer Abutment Cement retained restoration
Regular 1.2
D
5.0mm
H
H G/H
4.0
Fixture Level
Hex
5.0mm
D G/H
Non-Hex
5.5
7.0
Hex
Non-Hex
1.0
5014SHW
5014SNW
2.0
5024SHW
5024SNW
3.0
5034SHW
5034SNW
4.0
5044SHW
5044SNW
5.0
5054SHW
5054SNW
1.0
5015SHW
5015SNW
2.0
5025SHW
5025SNW
3.0
5035SHW
5035SNW
4.0
5045SHW
5045SNW
5.0
5055SHW
5055SNW
1.0
5017SHW
5017SNW
2.0
5027SHW
5027SNW
3.0
5037SHW
5037SNW
4.0
5047SHW
5047SNW
5.0
5057SHW
5057SNW
• Order code : HGTFA + item code ex) HGTFA + 5014SHW = HGTFA5014SHW
6.0mm
1.2
D
H
H G/H
Hex
4.0
Non-Hex
5.5
7.0
6.0mm
D G/H
Hex
Non-Hex
1.0
6014SHW
6014SNW
2.0
6024SHW
6024SNW
3.0
6034SHW
6034SNW
4.0
6044SHW
6044SNW
5.0
6054SHW
6054SNW
1.0
6015SHW
6015SNW
2.0
6025SHW
6025SNW
3.0
6035SHW
6035SNW
4.0
6045SHW
6045SNW
5.0
6055SHW
6055SNW
1.0
6017SHW
6017SNW
2.0
6027SHW
6027SNW
3.0
6037SHW
6037SNW
4.0
6047SHW
6047SNW
5.0
6057SHW
6057SNW
• Order code : HGTFA + item code ex) HGTFA + 6014SHW = HGTFA6014SHW
Prosthetic Components
10
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:47 AM Page 13
Transfer Abutment Components Fixture Lab Analog Code
Mini
Regular HGFLAS
Regular • Used
by dental laboratory to replicate the implant to impression coping and fixes to working model
• Locks
11
Mini HGFLAM
ETIII SA Implant System Catalog
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:47 AM Page 14
L
Mini
11 14 L
4.0mm
D
Type
Prosthetic Components
Fixture Transfer Impression Coping
Hex
4011MH
Non-Hex
4011MN
Hex
4014MH
Non-Hex
4014MN
Fixture Level
D
Hex
Non-Hex
Hex
L : 11
Non-Hex L : 14
Regular
L 11 L
14
D
Type
4.0mm
5.0mm
6.0mm
Hex
4011SH
5011SH
6011SH
Non-Hex
4011SN
5011SN
6011SN
Hex
4014SH
5014SH
6014SH
Non-Hex
4014SN
5014SN
6014SN
• Order
D
Hex
Non-Hex L : 11
Hex
Non-Hex L : 14
code : HGFTI + item code ex) HGFTI + 4011MH = HGFTI4011MH • Used for taking an impression with a ready-made tray • Triangular arc ( ) design improves identification following impression • Long and short types enhance convenience • The hex type is designed as a two-piece. The non-hex type is designed as a one-piece Includes transfer coping and guide pin Guide pins NOT sold separately
Fixture transfer impression coping
Registered triangle-circle
The fixture transfer impression coping allows easy and exact coping repositioning after the impression is made by using the triangle-circle structure ( ) for superior direction and position identification. And also the long/ short (12.5mm /9.5mm) feature overcomes path and intermaxillary interference. The vertical impression error can be prevented by blocking out the driver hex hole after connecting the coping.
Prosthetic Components
12
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:47 AM Page 15
Transfer Abutment Components Fixture Pick-up Impression Coping
L 11
Mini H
15
4.0mm
D
Type
Hex
4011MH
Non-Hex
4011MN
Hex
4015MH
Non-Hex
4015MN
L
Fixture Level D
L : 11
L : 15
Regular
L H
11 15
L
• Order
D
L : 11
13
L : 15
ETIII SA Implant System Catalog
D
Type
4.0mm
5.0mm
6.0mm
Hex
4011SH
5011SH
6011SH
Non-Hex
4011SN
5011SN
6011SN
Hex
4015SH
5015SH
6015SH
Non-Hex
4015SN
5015SN
6015SN
code : HGFPI + item code ex) HGFPI + 4011MH = HGFPI4011MH • Used for taking an impression with a customized tray • Impression coping designed with hole-in-one ; no need for resin fixation • Asymmetrical structure minimizes contact interference ( ) • Long and short types enhance convenience. Includes pick-up coping and guide pin Guide pin can be purchased separately
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:48 AM Page 16
Mini
Length
Guide pin helght
Mini
Regular
L
11
Guide Pin (H)
15
Guide Pin (H)
4.0mm 0
00M
Prosthetic Components
Fixture Pick-up Guide Pin
Regular 4.0mm
5.0mm
6.0mm
00S
0.5
05M
05S*
0.5
05ML*
05SL*
• Order
code : HGFPG + item code ex) HGFPG + 00M = HGFPG00M • Use 1.2 hex driver • * Custom Order - Please consult your sales representative for details.
Prosthetic Components
14
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:48 AM Page 17
Temporary Abutment Temporary Abutment Mini
1.2
G/H 1.0 3.0 G/H
4.0mm
D
Type
Hex
401MHT
Non-Hex
401MNT
Hex
403MHT
Non-Hex
403MNT
Fixture Level D
Hex
Non-Hex G/H 1.2
1.0 3.0
4.5mm
D
Type
Regular
Hex
451SHT
Non-Hex
451SNT
Hex
453SHT
Non-Hex
453SNT
• Order
code : HGTPA + item code ex) HGTPA + 401MHT = HGTPA401MHT • Used to make temporary prosthesis (material : Ti Gr-3) • Easy to customize ; designed for maximum flexibility • Use 1.2 hex driver • Tightening torque : 20Ncm (mini / Regular) Includes Ti abutment screw Ti abutment screw can be purchased separately (Mini : HGATSMT, Regular : HGATSST)
G/H
D
Hex
Non-Hex
Quick Temporary Abutment Cement/Screw Retained Restoration
Mini
1.2
G/H 5.0
Fixture Level D
Non-Hex
Regular
1.2
G/H
D
Hex
15
Non-Hex
ETIII SA Implant System Catalog
4.5mm
5.5mm
Hex
HGQTA455MHT
HGQTA555RHT
Non-Hex
HGQTA455MNT
HGQTA555RNT
• Cement and screw reained restorations possible • Biocompatible Plastic (PEEK) • Titanium base: Provides stable connection • Maximum Use: 180 days in the oral cavity • Final torque: 20Ncm (Mini & Regular)
G/H
Hex
D
Type
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:48 AM Page 18
Castable Abutment Prosthetic Components
GoldCast Abutment Cement or screw retained restoration
Mini
1.2
G/H
D
Type
1.0 3.0
4.0mm
Hex
401MHW
Non-Hex
401MNW
Hex
403MHW
Non-Hex
403MNW
G/H Fixture Level
G/H
D
Hex
1.0 1.2
Regular
D
Type
Non-Hex
3.0
4.5mm
Hex
451SHW
Non-Hex
451SNW
Hex
453SHW
Non-Hex
453SNW
• Order
code : HGGCA + item code ex) HGGCA + 401MHW = HGGCA401MHW • Used for cases with path and esthetic and spatial constraints • 11° taper connection for enhanced safety • Prosthesis must be cast with dental gold alloy • Melting point range of abutments (Au, Pt, Pd Alloy) : 1400°c ~ 1450°c (use of non-precious metal alloy for casting prohibited) • Use 1.2 hex driver • Tightening torque : 20Ncm (mini), 30Ncm (Regular) Includes Ebony Gold abutment screw Ebony Gold abutment screw can be purchased separately (Mini : HGATSM, Regular : HGATSS)
G/H
D
Hex
Non-Hex
NP-CAST Abutment Screw or Cement Retained Restoration
Mini
1.2
G/H
D
Type
1.0 10mm
3.0
4.0mm
Hex
HGNCA401MHW
Non-Hex
HGNCA401MNW
Hex
HGNCA403MHW
Non-Hex
HGNCA403MNW
G/H
Fixture Level D
Hex
Non-Hex
G/H
Regular
1.2
1.0 3.0
10mm
G/H
Fixture Level D
Hex
Non-Hex
D
Type
4.5mm
Hex
HGNCA451SHW
Non-Hex
HGNCA451SNW
Hex
HGNCA453SHW
Non-Hex
HGNCA453SNW
• Packing unit : Abutment + EbonyGold screw • Use for cases with path, aesthetic and spatial constraints • After customization, be sure to use only dental non-precious metal alloy for casting to make the prosthetis • Use the 1.2 hex driver • Tightening torque: 20Ncm(Mini), 20Ncm(Regular • Melting point: 1650ºC
Prosthetic Components
16
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:48 AM Page 19
LOCATOR® Abutment & Components LOCATOR® Abutment
Mini
D
G/H
1.0 2.0 3.0 4.0 5.0
1.5mm G/H Fixture level
3.7mm
3510M 3520M 3530M 3540M 3550M
D D
G/H
Regular
1.0 2.0 3.0 4.0 5.0
1.5mm G/H Fixture level
3.7mm
4010S 4020S 4030S 4040S 4050S
• Order
code : HGLCA + item code ex) HGLCA + 4010S = HGLCA4010S • Used for making implant retained overdentures • Accommodates up to 40° divergence between two implants • Stable dual retention and optimal holding capabilities against various retention forces (6N, 12N, 22N) • Use LOCATOR® torque driver • Tightening torque : 30Ncm
D
LOCATOR® Male Processing Kit
LOCATOR® male processing kit
LMPS
• Includes
denture cap, block-out spacer, black processing male & replacement males (blue, pink, clear) • packaging: 2 units
LOCATOR® Replacement Male
6N
12N
22N
Retention force 6N
LRM06S
12N
LRM12S
22N
LRM22S
• packaging:
17
ETIII SA Implant System Catalog
4 units
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:48 AM Page 20
6N
Prosthetic Components
LOCATOR® Extended Replacement Male
Retention force
12N • Used
6N
LEM06S
12N
LEM12S
for implant divergences between 10* to 20* 4 units
• packaging:
LOCATOR® Black Processing Male
LOCATOR® black processing male • Used
for laboratory production
• packaging:
LOCATOR® Block-Out Spacers
4 units
LOCATOR® block-out spacers • Used
LBPS
LBSS
for block-out process 20 units
• packaging:
LOCATOR® Impression Coping
LOCATOR® impression coping • Used
LICS
for abutment level impression 4 units
• packaging:
LOCATOR® Lab Analog
Diameter 4.0
LAL40S
5.0
LAL50S
• Replicates • packaging: LAL40S
the abutment for use by the dental laboratory 4 units
LAL50S
Prosthetic Components
18
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:48 AM Page 21
Stud Abutment & Components Stud Abutment Overdenture restoration
Mini
Regular
3.5mm
3.5mm
1.0
351M
351S
2.0
352M
352S
3.0
353M
353S
4.0
354M
354S
5.0
355M
355S
6.0
356M
356S
D
G/H
D
G/H Fixture Level
• Order
code : HGSAO + item code ex) HGSAO + 351M = HGSAO351M • Used for stud-type overdentures • Maximum path compensation of 20° • Use stud abutment driver • Tightening torque : 30Ncm Retainer cap set & O-ring can be purchased separately
19
ETIII SA Implant System Catalog
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:48 AM Page 22
Retainer cap set
Prosthetic Components
Retainer Cap Set
OARCS
• Can
be used with two types of retention force retention force with solid denture placement Includes retainer cap and O-rings (for laboratory, low retention and high retention) O-ring can be purchased separately
• Excellent
Retainer Set
Retainer set
OARS
• More
effective for small, occlusual gaps as compared to retainer cap Includes retainer + O-rings (for laboratory, low retention and high retention) O-ring can be purchased separately
O-Ring Set
O-ring set (for laboratory)
OAO100S
• Used
for production of overdentures Includes O-ring 5 piece
O-ring (for laboratory)
O-ring (Low retention)
O-ring set (Low retention)
OAO400S
• Oral
O-ring with low retention force (approximately 4N) Includes O-ring 5 piece
O-ring (High retention)
O-ring set (High retention)
OAO600S
• Oral
O-ring with high retention force (approximately 6N) Includes O-ring 5 piece
Stud Lab Analog
Stud lab analog
OAL
• Replicates
the implant for use by the dental laboratory to impression coping after the impression has been taken and fixed to the working model
• Locked
Prosthetic Components
20
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:48 AM Page 23
Rigid Abutment Rigid Abutment Cement retained restoration
Mini
H
4.0mm
D
4.0 H
G/H Fixture Level
5.5
4.0
5.5
7.0 7.0
G/H
4.0mm
4.5mm
1.0
4014MP
4514MP
2.0
4024MP
4524MP
3.0
4034MP
4534MP
4.0
4044MP
4544MP
1.0
4015MP
4515MP
2.0
4025MP
4525MP
3.0
4035MP
4535MP
4.0
4045MP
4545MP
1.0
4017MP
4517MP
2.0
4027MP
4527MP
3.0
4037MP
4537MP
4.0
4047MP
4547MP
4.5mm • Order
D
H
G/H Fixture Level
4.0
21
5.5
7.0
ETIII SA Implant System Catalog
code : HGRGA + item code ex) HGRGA + 4014MP = HGRGA4014MP • Used for making general cement-type prosthesis • Combined abutment and screw • 11° taper connection for enhanced safety • Gingival gold color for improved esthetics • Cross-section design to minimize prosthesis rotation • 4.0mm : use outer driver 4.5mm/ 5.0mm/ 6.0mm : use outer driver and 1.2 hex driver 7.0mm : Use 1.2 hex driver • Tightening torque : 30Ncm Includes protection cap (can be purchased separately)
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:48 AM Page 24
Prosthetic Components
Rigid Abutment Cement retained restoration
Regular
H
D
4.0mm H
4.0 G/H Fixture Level
4.0
5.5
7.0 5.5
D
4.5mm H
G/H
7.0
Fixture Level
4.0
5.5
H
5.0mm H
4.0
G/H
5.5
7.0
5.5
D
6.0mm H
G/H
4.0
4.0mm
4.5mm
5.0mm
1.0
4014SP
4514SP
5014SP
2.0
4024SP
4524SP
5024SP
3.0
4034SP
4534SP
5034SP
4.0
4044SP
4544SP
5044SP
5.0
-
-
5054SP
1.0
4015SP
4515SP
5015SP
2.0
4025SP
4525SP
5025SP
3.0
4035SP
4535SP
5035SP
4.0
4045SP
4545SP
5045SP
5.0
-
-
5055SP
1.0
4017SP
4517SP
5017SP
2.0
4027SP
4527SP
5027SP
3.0
4037SP
4537SP
5037SP
4.0
4047SP
4547SP
5047SP
5.0
-
-
5057SP
7.0 D
4.0
D
G/H
5.5
7.0
D
7.0
D
6.0mm
7.0mm
1.0
6014SP
-
2.0
6024SP
-
3.0
6034SP
-
4.0
6044SP
-
5.0
6054SP
-
1.0
6015SP
7015SP
2.0
6025SP
7025SP
3.0
6035SP
7035SP
4.0
6045SP
7045SP
5.0
6055SP
7055SP
1.0
6017SP
-
2.0
6027SP
-
3.0
6037SP
-
4.0
6047SP
-
5.0
6057SP
-
G/H
• Order
code : HGRGA+ item code ex) HGRGA + 4014SP = HGRGA4014SP
7.0mm H G/H
5.5
Prosthetic Components
22
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:48 AM Page 25
Rigid Abutment Components Rigid Protection Cap
Mini / Regular D
4.0mm
4.5mm
4.0
4004
4504
5.5
4005
4505
7.0
4007
4507
H
D
H
Regular H:4.0
H:5.5
D
5.0mm
6.0mm
4.0
5004S
6004S
-
5.5
5005S
6005S
7005S
7.0
5007S
6007S
-
H
H:7.0
7.0mm
• Order
code : HGRPC + item code ex) HGRPC + 4004 = HGRPC4004 • Protects abutment and minimizes patient's discomfort • Applicable as a substructure for temporary prosthesis • Conveniently locks in place
Rigid Impression Coping
Mini / Regular D
4.0mm
4.5mm
4.0(Yellow)
4004S
4504S
5.5(Gray)
4005S
4505S
7.0(Blue)
4007S
4507S
H
Regular D
5.0mm
6.0mm
7.0mm
4.0(Yellow)
5004SS
6004SS
-
5.5(Gray)
5005SS
6005SS
7005SS
7.0(Blue)
5007SS
6007SS
-
H D
H:4.0
H:5.5
H:7.0
• Order
code : HGRIC + item code ex) HGRIC + 4004S = HGRIC4004S • Used for taking impressions of rigid abutment • Color provides easy identification of abutment size - 4mm(Yellow), 5.5mm(Gray), 7.0mm(Blue) • Conveniently locks in place
23
ETIII SA Implant System Catalog
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:48 AM Page 26
Prosthetic Components
Rigid Burn-Out Cylinder
Mini / Regular Type
D
4.0mm
4.5mm
Single
40S
45S
Bridge
40B
45B Regular
D
5.0mm
6.0mm
Single
50SS
60SS
70SS
Bridge
50SB
60SB
70SB
Type D
(Single)
(Bridge)
7.0mm
• Order
code : HGRBC + item code ex) HGRBC + 40S = HGRBC40S • Used as prosthetic framework by connecting to rigid lab analog • Color provides identification of case type: Single (red), Bridge (white) • After prosthetic casting, the margin may be adjusted by a specialpurpose reamer
a. Snapped on the shoulder due to the burnout cylinder’s elasticity before casting b. Unfit due to metal inelasticity after casting c. Fit after reaming using a reamer
Rigid Lab Analog
Mini / Regular D
4.0mm
4.5mm
4.0(Yellow)
4004
4504
5.5(Gray)
4005
4505
7.0(Blue)
4007
4507
H
D
H
Regular D
5.0mm
6.0mm
7.0mm
4.0(Yellow)
5004S
6004S
-
5.5(Gray)
5005S
6005S
7005S
7.0(Blue)
5007S
6007S
-
H
H : 4.0
H : 5.5
H : 7.0
• Order
code : HGRLA + item code ex) HGRLA + 4004 = HGRLA4004 • Create rigid abutment on a working model • Color provides identification of abutments of varying lengths - 4mm(yellow), 5.5mm(gray), 7.0mm(blue)
Prosthetic Components
24
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:48 AM Page 27
Angled Abutment
Angled Abutment
G/H
Cement retained restoration
Mini 1.2
4.3mm
D
Hex(A Type)
432MAW
2.0
Hex(B Type)
432MBW
Non-Hex
432MNW
4.0
Hex(A Type) Hex(B Type) Non-Hex
434MAW 434MBW 434MNW
4.3mm 17°
Type
G/H Fixture Level D
30°
( A type ) ( B type )
( Non-Hex )
Regular
G/H
4.5mm
Type
D
Hex(A Type) 1.2
2.0
4.0
4.5mm
5.5mm
452SAW
552SAW
Hex(B Type)
452SBW
552SBW
Non-Hex
452SNW
552SNW
Hex(A Type)
454SAW
554SAW
Hex(B Type)
454SBW
554SBW
Non-Hex
454SNW
554SNW
G/H
• Order
D
( A type ) ( B type )
( Non-Hex )
5.5mm 1.2
G/H
D
( A type )
25
( B type )
( Non-Hex )
ETIII SA Implant System Catalog
code : HGAGA + item code ex) HGAGA + 432MAW = HGAGA432MAW • Used for the path adjustment of prosthesis at 17° axial angle • 11° taper connection for excellent safety • Gold color for improved esthetics • Functions as a double hex type (A and B hex types) • Abutment selector enables the selection of precise hex-type abutments • Use 1.2 hex driver • Tightening torque : 20Ncm (mini), 30Ncm (Regular) Includes Ebony Gold abutment screw Ebony Gold abutment screw can be purchased separately (Mini : HGATSM, Regular : HGATSS)
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:48 AM Page 28
Prosthetic Components
Angled Abutment Selector
Mini G/H 2.0 4.0
Regular
4.3mm
4.5mm
5.5mm
Hex(A Type)
432MA
452SA
552SA
Hex(B Type)
432MB
452SB
552SB
Hex(A Type)
434MA
454SA
554SA
Hex(B Type)
434MB
454SB
554SB
D
Type
• Order code : HGAAS + item code ex) HGAAS + 432MA = HGAAS432MA • Used for the selection of specifications such as A- or B-type Angled abutments, diameter, and G/H in the oral cavity or on a working model
Use of Angled Abutment Selector There are A/B two types of Angled Abutments. The internal hex structure of the fixture can cause interference between the 17° tapered body angled abutment and adjacent teeth. Choose an appropriate A/B Hex type using an angled abutment selector to minimize abutment reduction before prosthesis fabrication. Hex A Type
Hex B Type
Non-Hex
Hex A Type
Hex B Type
Selection Tools
A type selector connection
B type selector connection
(proper)
(improper)
Prosthetic Components
26
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:48 AM Page 29
ZioCera Abutment ZioCera Abutment Cement or screw retained restoration
Mini
4.5mm
D
4.5mm
H 1.2
Type
Hex
Non-Hex
3.5
453MHW
453MNW
5.0
455MHW
455MNW
G/H
7.0 H
G/H
Fixture Level D
Hex
Non-Hex
Regular
4.5mm
D
4.5mm
H
Type
Hex
Non-Hex
3.5
453SHW
453SNW
5.0
455SHW
455SNW
G/H
1.2
7.0 H
5.5mm
D G/H
H
Fixture Level D
Non-Hex
Hex
Non-Hex
3.5
553SHW
553SNW
5.0
555SHW
555SNW
G/H
7.0
Hex
Type
6.5mm
D H
5.5mm 1.2
7.0
Type
Hex
Non-Hex
3.5
653SHW
653SNW
5.0
655SHW
655SNW
G/H
H
• Order G/H
Fixture Level D
Hex
Non-Hex
6.5mm 1.2
H
G/H
Fixture Level D
Hex
27
Non-Hex
ETIII SA Implant System Catalog
code : HGZCA + item code ex) HGZCA + 453SHW = HGZCA453SHW • Used with esthetic prosthesis (Zirconia) • Ivory color mimics a natural tooth • The use of direct build-up method allows improved screw rotation • Use 1.2 hex driver • Tightening torque : 20Ncm (Mini), 30Ncm (Regular) Includes Ebony Gold abutment screw Ebony Gold abutment screw can be purchased separately (Mini : HGABSM, Regular : HGABSS)
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:48 AM Page 30
Prosthetic Components
ZioCera Angled Abutment Cement or screw retained restoration
Standard H 5.5mm
6.5mm
17°
Hex
Non-Hex
3.0
553SHW
553SNW
4.0
-
6.5mm
D H
G/H
Type
G/H
9.0
H
1.2
Fixture Level
5.5mm
D
9.0
Type
G/H
Hex
Non-Hex
3.0
-
-
4.0
654SHW
654SNW
D
Hex
Non-Hex
• Order code : HGZAA + item code ex) HGZAA + 553SHW = HGZAA553SHW • Used for the aesthetic prosthesis (Zirconia) • Ivory color like a natural tooth • The use of direct build-up method enables the screw restoration • The diameter which is useful and margin forms which are possible to modify • Used for the path adjustment of anterior in case of 17° axial angle • Use the 1.2 hex driver • Tightening torque : 30Ncm (Standard) ※ Includes EbonyGold abutment screw (may purchased separately. Mini : HGABSM, Standard : HGABSS)
Prosthetic Components
28
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:48 AM Page 31
FreeForm ST Abutment FreeForm ST Abutment
G/H 1.5
Mini
3.0 1.2
D
Type
Cement retained restoration
4.0mm
Hex
401MHW
Non-Hex
401MNW
Hex
403MHW
Non-Hex
403MNW
(4.0mm)
G/H Fixture Level D
Hex
Non-Hex
Regular
G/H
(4.0mm)
1.5
(5.5mm) 1.2
3.0
4.0mm
5.5mm
7.0mm
Hex
401SHW
551SHW
701SHW
Non-Hex
401SNW
551SNW
701SNW
Hex
403SHW
553SHW
703SHW
Non-Hex
403SNW
553SNW
703SNW
D
Type
• Order
G/H
D
Hex
Non-Hex
Hex
Non-Hex
(7.0mm)
code : HGFSA + item code ex) HGFSA + 401MHW = HGFSA401MHW • Used to adjust the path of abutment and customize prosthetic margin • 11° taper connection for enhanced safety • Gingival gold color for improved esthetics • Use 1.2 hex driver • Tightening torque : 20Ncm (mini), 30Ncm (Regular) Includes Ebony Gold abutment screw Ebony Gold abutment screw can be purchased separately (Mini : HGATSM, Regular : HGATSS)
1.2
When modifying Freeform ST abutment, the minimum length of the abutment after modification cannot be less than 4mm from the margin to the top of the abutment G/H
D
Hex
29
Non-Hex
ETIII SA Implant System Catalog
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:48 AM Page 32
Convertible Abutment
Screw & Cement Retained Restoration
Mini D
G/H
1.0
GSCA4010P
2.0
GSCA4020P
3.0
GSCA4030P
4.0
GSCA4040P D
4.0mm
4.8mm
6.0mm
1.0
GSCAS4010P
GSCA4810P
GSCA6010P
2.0
GSCAS4020P
GSCA4820P
GSCA6020P
3.0
GSCAS4030P
GSCA4830P
GSCA6030P
4.0
GSCAS4040P
GSCA4840P
GSCA6040P
5.0
-
GSCA4850P
GSCA6050P
G/H
Fixture Level
Regular
4.0mm
D
G/H
Prosthetic Components
Convertible Abutment
• Used
D
for creating bridges with dislocated path to switch prosthesis onto a cylinder following abutment connection in the oral cavity • 4.0mm : Used with O-ring abutment driver 4.8mm, 6.0mm : Used with Octa abutment driver • Tightening torque : 30 Ncm Includes Carrier • Designed
G/H
Convertible Combination Cylinder
Mini H
D 1.2
7.0
Regular
4.0mm
4.0mm
4070WH(Hex) 4070NWH(Non-Hex)
Ebony Gold Screw
GSFSM
4.8mm
6.0mm
4870WH (Octa)
6070WH (Octa)
GSFSR
H
• Order D
code : GSCC + item code ex) GSCC + 4870WH = GSCC4870WH • Used for making combination-retained prosthesis using convertible abutments. • Use 1.2 hex driver • Tightening torque : 20 Ncm Includes Ebony Gold Cylinder Screw
Prosthetic Components
30
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:49 AM Page 33
Convertible Abutment Components Convertible GoldCast Cylinder
Mini D
H
4.0mm
400WH(Hex)
12
400NWH(Non-Hex)
1.2
Ebony Gold Screw H
Regular
4.0mm
4.8mm
6.0mm
480WH (Octa)
600WH (Octa)
GSFSM
GSFSR
• Order
code : GSGC + item code ex) GSGC + 480WH = GSGC480WH • Used for making screw-retained prosthesis using convertible abutments • Dental gold alloy should be used to cast the prosthesis • Melting point range of cylinder (Au, Pt, Pd Alloy) : 1400°c- 1450°c (use of non-precious metal alloy for casting prohibited) • Use 1.2 hex driver • Tightening torque : 20 Ncm Includes Ebony Gold Cylinder Screw
D
Convertible Temporary Cylinder
Mini D
H
4.0mm
400WHW(Hex)
10
1.2
Regular
4.0mm
400NWH(Non-Hex)
4.8mm
6.0mm
480WH (Octa)
600WH (Octa)
GSFSM
Ebony Gold Screw
GSFSR
H
• Order
code : GSCTC + item code ex) GSCTC + 480WH = GSCTC480WH • Used to make temporary prosthesis • Easy to customize; for a large range of cases • Use 1.2 hex driver • Tightening torque : 20 Ncm Includes Ebony Gold Cylinder Screw
D
Convertible Plastic Cylinder
Mini D
H
12 1.2
EbonyGold Screw H
D
31
ETIII SA Implant System Catalog
Regular
Ø4.0
Ø4.0
400WH(Hex) 400NWH(Non-Hex) GSFSM
• Order code : GSCPL + item code ex) GSCPL + 480WH = GSCPL480WH • Used to make temporary prosthesis • Easy to customize; for a large range of cases • Use a 1.2 hex driver • Tightening torque: 20Ncm
Ø4.8
Ø6.0
480WH (Octa)
600WH (Octa)
GSFSR
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:49 AM Page 34
Mini D
Regular
4.0mm
4.0mm 400
Code
Prosthetic Components
Convertible Pick-up Impression Coping
4.8mm
6.0mm
480
600
H
• Order
D
code : GSPIC + item code ex) GSPIC + 480 = GSPIC480 • Pick-up type for taking an impression using a customized tray • Impression coping designed with Hole-in-one ; no need for resin fixation • Asymmetrical structure minimizing contact interference ( ) Includes Guide Pin
Convertible Transfer Impression Coping
Mini D
Regular
4.0mm
Code
4.0mm 400
4.8mm
6.0mm
480
600
• Order
code : GSTIC + item code ex) GSTIC + 480 = GSTIC480 • Used for taking an impression with a ready-made tray Includes Guide Pin D
Prosthetic Components
32
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:49 AM Page 35
Convertible Abutment Components Convertible Protection Cap
Mini D 1.2
Regular
4.0mm
4.0mm
Code
400WH
EbonyGold Screw
GSFSM
4.8mm
6.0mm
480WH
600WH
GSFSR
• Order
code : GSCHC + item code ex) GSCHC + 480WH = GSCHC480WH • Used for protection of convertible abutments and to minimize patient discomfort • Use 1.2 hex driver • Tightening torque : 20Ncm Includes Ebony Gold Cylinder Screw
D
Convertible Lab Analog
Mini D Code
Regular
4.0mm
4.0mm
4.8mm
6.0mm
480
600
400
D
• Order
code : GSCLA+ item code ex) GSCLA + 480 = GSCLA480 • Used to create esthetic oral abutments on working models
Convertible Polishing Protector
Mini
D
Regular
D
4.0mm
4.8mm
6.0mm
Code
400
480
600
• Order
code : GSCPC + item code ex) GSCPC + 480 = GSCPC480 • Used for polishing prosthetic casting, to avoid damaging the cylinder joint
33
ETIII SA Implant System Catalog
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:49 AM Page 36
Multi Angled Abutment
Mini
D
Regular 17°
17° G/H
Angled
17°
30°
Fixture Level
30°
30°
Prosthetic Components
Multi-Angled Abutment
Mini-4.8mm
Regular-4.8mm
2.5
217MHW
217SHW
3.0
317MHW
317SHW
4.0
417MHW
417SHW
3.5
330MHW
330SHW
4.0
430MHW
430SHW
5.0
530MHW
530SHW
G/H
• Used with esthetic low cylinders and components (non-hex only) • Connected to implant by multi-angled abutment carrier • Includes multi-angled abutment screw • Multi-angled carrier sold separately • Tightening torque : Mini - 20 Ncm, Regular - 30Ncm Order code Multi Angled Abutment package : HGMAA + item code
G/H Fixture Level
ex) HGMAA + 317MHW = HGMAA317MHW
Multi-Angled Abutment Screw EbonyGold Screw Mini 1.2
Mini
Regular
HGMATSM
HGMATSS
Regular 1.2
Multi-Angled Abutment Carrier
• Use a 1.2 hex driver • For multi-angled abutment only
Code
HGMAC
• Tool for stable & safety connect implant to multi-angled abutment
Prosthetic Components
34
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:49 AM Page 37
Esthetic-Low Cylinders & Components Esthetic Low Transfer Impression Coping
H
D 8.0
4.8mm MTTR100
• For closed tray H
D
Esthetic Low Pick up Impression Coping
H
D 8.0 15
Guide pin (L)
4.8mm MSR100 GP150*
• Packing : Esthetic low pick-up impression coping + guide pin( GP150) L 8.0
D
Esthetic Low Lab Analog
Esthetic Low Healing Cap
Code
H
MERR300
D 4.6
4.8mm MHCR100
• Used during soft tissue healing period after the impression
Esthetic Low Cylinder Screw
Code • Use 1.2 hex driver
35
ETIII SA Implant System Catalog
MTS200
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:49 AM Page 38
Type
D
Prosthetic Components
Esthetic Low Gold Cylinder
4.8mm
Non-Hex
MGR100WH
Ti Cylinder Screw
MTS200
• Used with precious alloy casting • Packaging: Esthetic low gold cylinder + Ti cylinder screw • Tightening torque : 20Ncm * Ti cylinder screw included * Ti cylinder screw can be purchased separately.
Esthetic Low Plastic Cylinder
Type
D
4.8mm
Non-Hex
MEPR100TH
Ti Cylinder Screw
MTS200
• Used with non-precious alloy casting • Packaging: Esthetic low plastic cylinder + Ti cylinder screw • Tightening torque : 20Ncm * Ti cylinder screw included * Ti cylinder screw can also be purchased separately.
Esthetic Low Temporary Cylinder
Type
D
4.8mm
Non-Hex
MTR100TH
Ti Cylinder Screw
MTS200
• For provisional restorations • Packaging: Esthetic low temporary cylinder + Ti cylinder screw • Tightening torque : 20Ncm * Ti cylinder screw included * Ti cylinder screw can be purchased separately.
Esthetic Low Polishing Protector
H
D 4.6
4.8mm MPCR100
• Use a polishing work after Casting or making provisional restorations
Prosthetic Components
36
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:49 AM Page 39
Abutment Screw Abutment Screw Ebony Gold Abutment Screw Mini 1.2
Regular
Mini
HGABSM
1.2
Regular
HGABSS
• Use
1.2 hex driver Gold abutment screw can be purchased separately • Applicable abutments - ZioCera abutment • Ebony
Old Style
Old Style
1.2
1.2
Mini
HGATSM
Regular
HGATSS
• Use
1.2 hex driver Gold abutment screw can be purchased separately • Applicable abutments - Transfer abutment - Angled abutment - FreeForm ST abutment - GoldCast abutment • Ebony
New Style
New Style
Titanium Abutment Screw Mini
Regular
Mini
HGABSMT
1.2
1.2
Regular
HGABSST
• Use
1.2 hex driver abutment screw can be purchased separately
• Titanium
Old Style
Old Style
1.2
1.2
Mini
HGATSMT
Regular
HGATSST
• Use
1.2 hex driver abutment screw can be purchased separately • Applicable abutments - Temporary abutment • Titanium
New Style
37
New Style
ETIII SA Implant System Catalog
ETIII and Prosthetics 40pp Dec2013_ETIII and Prosthetics 40pp Aug2013 12/18/13 11:49 AM Page 40
Code
Lab Screw 1.2
1.2
Mini
Regular
Lab Screw
HGATSML
HGATSSL
Waxing Screw
HGATSMW
HGATSSW
Prosthetic Components
Laboratory Screw
• Lab
Screw : Replaces abutment screw. Screw : Use for making the screw hole of a transfer jig or wax-up component. • Laboratory screw can be purchased separately • Applicable abutments - Transfer abutment - Angled abutment - FreeForm ST abutment - GoldCast abutment • Waxing
Waxing Screw 1.2
1.2
Prosthetic Components
38
