ETHERNET COAXIAL ADAPTOR MxU 128 Mbps

Ref. 7671

User Manual

© Copyright Televés S.A.

ETHERNET COAXIAL ADAPTOR MxU

Ref. 7671

CONTENTS

Page

1- CONTENTS ....................................................... 1.1 - COAXIAL ADAPTOR 128Mbps TELEVES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 - SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 - SYSTEM REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4 - PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 5 5 5 6

2- GETTING TO KNOW THE COAXIAL ADAPTOR 128Mbps . . . . . . . . . . . . . . . . . . . . . . 2.1 - THE ADAPTOR LEDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7 8

3- INSTALLATION ON THE COAXIAL ADAPTOR MxU SOCKETS . . . . . . . . . . . . . . . . . . . 3.1 - INSTALLATION OF THE CAT-5 CABLE OF YOUR ADAPTOR . . . . . . . . . . . . 3.2 - CONNECTING TO THE COAXIAL NETWORK . . . . . . . . . . . . . . . . . . . . . . . . .

9 9 9

4- TECHNICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

5- PROBLEM SOLVING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

3

ETHERNET COAXIAL ADAPTOR MxU

Ref. 7671

Important safety instructions

- Power sockets should be close to the equipment and easily accessible. - Do not connect feed until the installation is complete. - To disconnect the equipment from the feed grid, unplug the adaptor. - Do not use oils, solvents, petrol, paint thinners or insecticides to clean this device. - This device contains no user-repairable parts. Do not open as there is a risk of electric shock. - Do not use the device near water, for example: bathtubs, washbasins, humid areas, swimming pools, etc. - Use the power feed recommended on the data plate. - Unplug the grid adaptor under the following circumstances a) If the plug is damaged. b) If the device has been in contact with water. c) If the device is not functioning normally. d) If the device has broken down.

This symbol indicates total compliance with EC marking.

This symbol indicates the equipment should be used indoors.

This symbol indicates that the equipment complies with Class II equipment safety requirements.

4

ETHERNET COAXIAL ADAPTOR MxU

Ref. 7671

1- INTRODUCTION 1.1- Coaxial Adaptor 128Mbps Televés

Thank you for purchasing the MxU Coaxial Adaptor128Mbps. Now you can immediately connect multiple PCs to the coaxial network of your home, hotel or building with no need for extra cables, Hubs or Switches. The data will be transported on the coaxial cable installation of the existing TV distribution. The MxU Coaxial Adaptor 128Mbps enables the transmission of network data at the same time as that of the existing TV channels or services. This device is equipped with two standard F connectors, 2 Ethernet ports and a feed connector, and is able to transmit up to 72 effective Mbps.

Each of the adaptors enables the connection of a possible WAN data network established on the head with each of the TV sockets of your building or house through the coaxial cable.

1.2- Specifications

Connect your computer to the shared or Internet access services, using the existing coaxial cabling of your building. Easy to install, with no need to open up the PC or install any kind of driver. 3 easy-to-read LED indicators to show the status of the adaptor. Data transfer rate of up to 72 Mbps. Shares high velocity Internet access. Connects up to 31 adaptors on your coaxial distribution network, with high velocity access. No Hubs or Switches are required. The data travel on the coaxial cable. The maximum attenuation supported between the head and the respective socket is 50 dB on the return channel. The minimum attenuation is 12 dB.

1.3- System requirements

To use this device, you must have a PC with an Ethernet 802.3 network interface (card). The system is totally Plug&Play and does not require the installation of any additional software or driver

5

Ref. 7671

ETHERNET COAXIAL ADAPTOR MxU

1.4- Contents of the Ethernet MxU Adaptor 128Mbps Kit Package

1

Coaxial Adaptor 128 Mbps

2

External feed 12V/1200mA

3

Ethernet CAT-5 Pigtail Connector

4

Coaxial Cable Pigtail Connector 2.5m white

5

Adaptors

6

Technical Data Sheet

6

ETHERNET COAXIAL ADAPTOR MxU

Ref. 7671

00 11 40 23

e od M

nc Sy

C

oa

x

Li

nk

Re

f

er w 71 Po 76 .

2- GETTING TO KNOW THE COAXIAL-ADAPTOR 128MBPS

M

AX

CO

ET-

RN

HE

ET xU

R

TE

AP

AD

1 Data/TV Connector 2 TV Connector 3 Ethernet 4 Feed

ax

c

Lin k ET-COAX ADAPTE

71

Mx U ET HERN

er

. 76

Mo de

Ref

Pow

Co

Syn

234 011 00

R

No function

1

Data/TV Connector F Female Connector for data network and TV input, directly from the TV socket.

2

TV Connector F Female Connector for services or TV channel output.

3

Ethernet Ports The Ethernet ports enable you to connect your Coaxial Ethernet Adaptor 128Mbps to the network card of your PC or notebook, as well as connecting multiple other devices such as VoIP phones, set-top boxes, etc...

7

Ref. 7671

ETHERNET COAXIAL ADAPTOR MxU

4

Feed Connector You should connect the direct current source accompanying the device, whose parameters are 15V and 800mA.

1

Power

Sync Mode

Coax Link

MxU ETHERNET-COAX ADAPTER

234011 00 Ref. 7671

2.1. The adaptor LEDs

Power This LED lights up when the adaptor is connected to the feed source.

2

Sync Mode This LED will show that connectivity has been established with the master adaptor. It should be lit up for operations of data transmission and reception.

3

Coax Link It will turn on if a link is established between two adaptors in the network. It will always turn on if there is intermittent data transmission or reception activity.

8

ETHERNET COAXIAL ADAPTOR MxU

Ref. 7671

3- INSTALLATION ON THE SOCKETS OF THE COAXIAL MXU ADAPTOR The following instructions show how to connect the Coaxial 128Mbps Adaptor from the coaxial socket to your PC. Once installed, you can directly connect it to the network interface of your PC without the need to install a driver or additional software.

3.1- Installation of the CAT-5 cable of your Adaptor

1. Connect one end of the cable to the Ethernet Network interface of the 7671 adaptor. 2. Connect the other end to the RJ-45 connector of your PC.

Your Coaxial Adaptor 128Mbps is now connected to your PC. Continue with the following instructions to connect your PC to the access point established in the coaxial network.

3.2- Connecting to the Coaxial Network

As shown in the general specifications of the Coaxial Adaptor 128Mbps, the maximum attenuation between two connected points should be less than 50 dB on the 12-28Mhz return channel.

Network

er w Po

11 40 23

e Li x oa C

Sy

nc

nk

M

od

00

Re

f.

76

71

Ref. 7671 Slave

Mx

AX CO ETERN U ETH

TV Socket

R PTE ADA

CEI + adaptor CEI-F Cable

Ethernet Cable

To connect the slave adaptor to one of the TV sockets: 1. Connect one end of the coaxial cable (CEI-female) accompanying the adaptor to the TV output port (CEI male).

9

ETHERNET COAXIAL ADAPTOR MxU

Ref. 7671

2. Connect the other end of the cable (CEI-Male+F adaptor) to the data input port of the adaptor (F female Connector).

If both the head and the adaptors have been correctly installed in the coaxial network, the slave adaptors must have the Sync Mode LED permanently lit up.

¡ Now your PC is connected to your coaxial TV distribution network!

10

ETHERNET COAXIAL ADAPTOR MxU

Ref. 7671

4.- TECHNICAL SPECIFICATIONS Output signal level

120 dBmV

Maximum attenuation

50 dB

Minimum attenuation

12 dB

Working frequency

12-28 Mhz

Maximum consumption (12V)

400 mA

Maximum spectral power density

-60 dBm/Hz

Minimum spectral density at reception -120 dBm/Hz

(Gaussian Noise in RX of -140dBm/Hz) Maximum working temperature

40ºC

Transmission velocity

128 Mpbs

Maximum distance supported