more than you expect
ESD safe hand tools
ESD safe tools The discharge of static electricity poses a great risk for electronical components. Even a small incospicuous discharge may damage the internal structure of the electronic component, and thus the functionality of the whole device.
The design and the surface of the handle gives the Wiha ESD safe hand tools the best possible working comfortability, slipproof grip and working efficiency.
2
more than you expect
Secure product quality with the right actions.
• ESD safe tools
• ESD protected work area, where the static electricity is safely conducted to ground.
• ESD gloves, ESD footwear and ESD wrist strap, which can be used to conduct static electricity safely to the ground via a high resistance (about 1 MΩ).
Wiha ESD screwdrivers have dissipative handles with surface resistance of 106 – 109 Ω. This ensures “a safe discharge” while working. This prevents damage done to vulnerable components by static discharge. All Wiha ESD safe tools meet the requirements for the international ESD Standard DIN EN 61340-5-1/ 61340-5-2. Note: The Wiha ESD safe hand tools are not insulated, and thus are not allowed to be used for working on devices connected to a power source.
The wide selection of Würth Elektronik Oy has a tool for any occasion. • Wiha SoftFinish® ESD- screwdrivers • Wiha ESD precision screwdrivers • Wiha ESD pliers
3
ESD-Screwdrivers
Handle: Ergonomic SoftFinish® handle. Compliant with ESD- Standard DIN EN 61340-5-1/ 61340-5-2.
Shank: Chrome plated through hardened chromevanadium-molybdenum steel. Wiha ChromTop® finishing ensures compability in every application process. Round shank.
4
more than you expect
302ESD
362ESD
ESD- slotted screwdriver
Product code 2714 302 25 2714 302 30 2714 302 40 2714 302 55 2714 302 65
311ESD
ESD- Torx® screwdriver
Product code 2.5 3.0 4.0 5.5 6.5
75 100 100 125 150
0.4 0.4 0.8 1.0 1.2
2.5 3.0 4.0 5.5 6.0
179 204 211 236 268
23 23 30 30 36
10 10 10 10 10
2714 362 4 2714 362 5 2714 362 6 2714 362 8 2714 362 9 2714 362 10 2714 362 15 2714 362 20
T4 T5 T6 T8 T9 T10 T15 T20
60 60 60 60 60 80 80 100
2.5 3.5 3.5 3.5 4.0 4.0 4.0 4.0
164 164 164 164 171 191 191 218
23 23 23 23 30 30 30 36
10 10 10 10 10 10 10 10
ESD- Phillips screwdriver
Product code 2714 311 00 2714 311 01 2714 311 02
PH0 PH1 PH2
60 80 100
3.0 4.5 6.0
164 191 218
23 30 36
10 10 10
302ESDHK5 ESD- slot/Phillips screwdriver set, 5-parts Product code
Series
2714 302 005 302ESD HK5 01
313ESD
ESD- Pozidriv screwdriver
1
302ESD
3.0x100 4.0x100
311ESD
PH0x60
PH1x80
PH2x100
Product code 2714 313 00 2714 313 01
PZ0 PZ1
60 80
3.0 4.5
191 191
23 30
10 10
362ESD K5 ESD- Torx® screwdriver set, 5- parts Product code
Series
2714 362 005 362ESD K5
1
362ESD T6x60 T8x60 T9x60 T10x80 T15x80
5
ESD-precision screwdrivers
272
275
ESD- slotted screwdriver
Product code 2714 272 15 2714 272 20 2714 272 25 2714 272 30 2714 272 35 2714 272 40
273
Product code 1.5 2.0 2.5 3.0 3.5 4.0
40 40 50 50 60 60
0.25 0.40 0.40 0.50 0.60 0.80
2.0 2.0 2.5 3.0 3.5 4.0
120 120 145 145 170 170
12.5 12.5 13.0 13.0 14.0 14.0
10 10 10 10 10 10
2714 275 07 2714 275 09 2714 275 13 2714 275 15 2714 275 20 2714 275 25 2714 275 30
2714 273 000 2714 273 00 2714 273 0 2714 273 1
276 PH000 PH00 PH0 PH1
40 40 50 60
2.0 2.0 3.0 4.0
120 120 145 170
12.5 12.5 13.0 14.0
10 10 10 10
40 40 40 50 50 60 60
120 120 120 145 145 170 170
12.5 12.5 12.5 13.0 13.0 14.0 14.0
10 10 10 10 10 10 10
ESD- ball end hex screwdriver
Product code 2714 276 15 2714 276 20 2714 276 25 2714 276 30
277
ESD- Pozidriv screwdriver
Product code 2714 274 1
0.7 0.9 1.3 1.5 2 2.5 3
ESD- Phillips screwdriver
Product code
274
ESD- standard hex screwdriver
1.5 2 2.5 3
50 50 60 60
145 145 170 170
13.0 13.0 14.0 14.0
10 10 10 10
ESD- nutdrivers
Product code PZ1
60
4.0
170
14
10
2714 277 25 2714 277 30 2714 277 35 2714 277 40 2714 277 50 2714 277 55
6
2.5 3 3.5 4 5 5.5
60 60 60 60 60 60
4.0 5.0 5.3 5.5 6.8 7.6
4.0 5.0 6.0 6.0 7.0 8.0
155 155 155 155 155 170
13.0 13.0 13.0 13.0 13.0 14.0
10 10 10 10 10 10
more than you expect
278
278IP
ESD- Torx® screwdriver
Product code 2714 278 3 2714 278 4 2714 278 5 2714 278 6 2714 278 7 2714 278 8 2714 278 9 2714 278 10 2714 278 15 2714 278 20
278R
ESD- Torx plus®
Product code T3 T4 T5 T6 T7 T8 T9 T10 T15 T20
40 40 40 40 40 40 50 50 60 60
2.5 2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.5 4.0
120 120 120 120 120 120 145 145 170 170
12.5 12.5 12.5 12.5 12.5 12.5 13.0 13.0 14.0 14.0
10 10 10 10 10 10 10 10 10 10
2714 278 40 2714 278 50 2714 278 60 2714 278 70 2714 278 80 2714 278 90 2714 278 100 2714 278 150
10 10 10 10 10 10
272K6
4IP 5IP 6IP 7IP 8IP 9IP 10IP 15IP
40 40 40 40 40 50 50 60
2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.5
120 120 120 120 120 145 145 170
12.5 12.5 12.5 12.5 12.5 13.0 13.0 14.0
10 10 10 10 10 10 10 10
ESD- Torx® screwdriver retaining spring hold
Product code 2714 278 06 2714 278 07 2714 278 08 2714 278 09 2714 278 010 2714 278 015
279-10
T6 T7 T8 T9 T10 T15
40 40 40 50 50 60
2.5 2.5 2.5 3.0 3.0 3.5
120 120 120 145 145 170
12.5 12.5 12.5 13.0 13.0 14.0
Product code
ESD- slotted / Phillips screwdriver set, 6- parts Series
2714 272 006 272 K6
278K6
ESD- chip lifter
1
272
1.5x40
273
PH00x40
2.0x40
2.5x50
3.0x50
PH0x50
ESD- Torx® screwdriver set, 6- parts
Product code 2714 279 10
3.5
50
145
13.0
Product code
10
Series
2714 278 006 278 K6
7
1
T5x40
T6x40
T10x50
T15x60
T7x40
T8x40
ESD-Pihdit Optimal ergonomic design
• Soft, comfortable to hold and firm handles.
• The non-slip handles ensures a good precision.
• Spot welded double leaf spring ensures constant and repeatable operation at maximum accuracy through out the working life of the pliers. • The durable precision box joint operates very softly and precisily without adjust- ing. • Low glare mirror polished finish reduces the risk of corrosion and the detach- ment of the chrome plating, which is easy to keep clean. • Long-lasting plier cutting edges are additionally induction hardened in order to maintain adequate sharpness through out the working life.
8
more than you expect
ESD-pliers, sharp tip Compliant with DIN / ISO 9654
Z 41 1 04 Head: Cutting: Application:
Z 40 1 04 Head: Cutting: Application:
Narrow and pointed head. Near level cutting properties. For thin and hard materials. Suitable for working in areas with limited space.
Sharp head. Normal cutting. For hard materials. For general use with electronics and electrical applications.
Product code 3714 411 04
115
4 1/2
1.4
1.0
0.4
60
5
60
5
Product code 3714 401 04
115
4 1/2
1.0
0.6
0.3
60
5
Z 41 3 04 Head: Cutting: Application:
Z 40 4 04 Head: Cutting: Application:
Sharp head. Level cutting. For copper wires.
Product code 3714 413 04
Extra narrow and short head. Almost level cutting. For copper wires and working in particularly restricted spaces.
115
4 1/2
1.0
Product code 3714 404 04
115
4 1/2
1.0
60
5
Details of cutting results of cutting pliers Symbol
Wire type
Example
Tensile strength N/mm2
Soft wire
Copper, aluminium
220 - 250
Medium hard wire
Iron nail
750 - 800
Hard wire
Spring wire, steel nails
1.600 - 1.800
Piano wire
Hardened spring steel
2.200 - 2.300
Z 41 4 04 Head: Cutting: Application:
Wide and pointed head with wire trapping spring. Almost level cutting. For copper wires, prevents the cut off parts from fall- ing.
Product code
Test wires standardized in DIN / ISO 5744
3714 414 115
9
115
4 1/2
1.2
60
5
ESD-Pliers ESD-Oblique end cutters Compliant with DIN / ISO 9654
ESD-pliers, semi-circular head Compliant with DIN / ISO 9654
Z 43 1 04 Head: Cutting: Application:
Z 46 1 04
Narrow and semi-circular head. Almost level cutting For copper wires. For working in particularly restricted spaces.
Head: Cutting: Application:
Product code 3714 431 115
Product code 115
4 1/2
1.2
60
5
3714 461 115
Z 44 1 04 Head: Cutting: Application:
Semi-circular head. Normal cutting For hard materials. General purpose pliers for electronics and electrical application.
Head: Cutting: Application:
115
4 1/2
1.4
1.0
0,4
60
3714 464 110
5
1.2
78
5
Extra narrow head. Cutting edges angled at 40°. Almost level cutting. For soft materials and working in particularly restricted spaces.
110
4 3/8
0.6
42
5
Z 47 1 04
Semi-circular head Almost level cutting. Soft materials.
Head: Cutting: Application:
Product code 3714 443 115
4 1/2
Product code
Z 44 3 04 Head: Cutting: Application:
115
Z 46 4 04
Product code 3714 441 115
Wide head, angled at 29°. Almost level cutting. For soft materials.
Extra narrow, slim shape. Almost level cutting. For soft materials and working in particularly re- stricted spaces.
Product code 115
4 1/2
1.2
60
5
3714 471 110
10
110
4 1/2
0.6
65
5
more than you expect
ESD-End cutters Compliant with DIN / ISO 9654
Z 47 2 04 Head: Cutting: Application:
Z 36 1 04
Wide head. Almost level cutting For soft, but also thicker materials.
Head:
Angled at 45°, smooth gripping surfaces
Product code 3714 361 120
Product code 3714 472 115
115
4 1/2
1.4
65
120
4 3/4
60
5
5
ESD-Gripping pliers Compliant with DIN / ISO 9655 Material C 45 Special tool steel, hardened and tempered
Z 37 0 04 Head:
Round, short jaws.
Product code 3714 370 120
120
4 3/4
60
5
Z 36 0 04 Head:
Straight, ridged gripping surfaces.
Product code 3714 360 120 3714 360 145
120 145
4 3/4 5 3/4
A
B
D
F
9.5 12.0
23 40
6.5 7.5
1.4 2.0
60 93
5 5
Z38 0 04 Kärki:
Flat, smooth gripping surfaces
Product code 3714 380 120
11
120
4 3/4
60
5
more than you expect
WE-service There is always a solution tailored to meet the invidual requirements of the customer, concerning the product selection as well as how the products are delivered and available to customer. All the products are easy to take. Compact space. Always in order. Without expensive acquisition routines. Clean solution. Versatile readiness for electrical file transfer. Enables the smart control of the warehouse by
© Würth Elektronik Oy 9/2012 TP 170 g/m2 art 1000
the rules set by the customer.
Würth Elektronik Oy • Karhutie 4 • 01900 Nurmijärvi, Finland • Tel + 358 010 308 4700 • Fax +358 010 308 4701 12 www.wurthelektronik.fi