Energy Saver Residential Gas Water Heaters

Energy Saver Residential Gas Water Heaters Energy Saver Gas Models Lochinvar’s Energy Saver residential gas models are available in 30, 40, 50 and 55 ...
Author: Christal Booth
2 downloads 2 Views 8MB Size
Energy Saver Residential Gas Water Heaters Energy Saver Gas Models Lochinvar’s Energy Saver residential gas models are available in 30, 40, 50 and 55 gallon capacities in short, medium and tall configurations.

Standard Features • Code Compliance - The Energy Saver residential gas water heater meets the National Appliance Energy Conservation Act (NAECA) Energy Factor requirements effective April 16, 2015. Meets the thermal efficiency and standby loss requirements of ASHRAE/IES 90.1. Meets UBC, CEC and HUD national codes. • Flammable Vapor Ignition Resistant - Combustion air is directed through a stainless steel flame arrestor plate specifically designed to prevent flame rollout and flammable vapor ignition. The design includes a safety thermal switch and protection from lint, dust and oil buildup. • Electronic Gas Control - The gas valve features an internal microprocessor for precise temperature control, fast response and an LED status indictor for simplified service diagnostics. The valve is powered by a thermopile pilot requiring no external power source. • Low NOx Burner - The patented radial burner design reduces NOx emissions by more than 33% delivering less than 40 ng/j of NOx. • Glass-Lined Steel Tank - The durable glass lining is fused to the steel tank at 1600°F to assure lasting protection against rust and corrosion while providing clear, clean hot water. 300 PSI test pressure; 150 PSI working pressure. • Non-CFC Foam Insulation - A uniform coverage of thick closed-cell foam insulation minimizes standby heat loss, maximizes heat retention and delivers a high Energy Factor. • Tank Saver Anode - A large diameter, high capacity anode inhibits corrosion of the tank interior for long, trouble-free service. • Heat Trap - Heat traps are built into the inlet and outlet connections to eliminate heat migration and heat loss in the water piping. • Temperature & Pressure Relief Valve - Factory installed for optimum safety. • Brass Drain Valve - An enhanced ball valve design for effective drainage and positive shut-off. • 6- Year Limited Tank & Parts Warranty* – See warranty sheet for details. • 10-Year Extended Warranty Available – Available for residential applications only.

*1-year limited tank & parts warranty when installed in a commercial application.

All models meet or exceed the NAECA and ASHRAE Energy Efficiency Standards preliminary as of january 6, 2015 - details subject to change

Dimensions and Specifications: TOP VIEW ANODE

FOR EASE IN ORDERING BY MODEL NUMBER G

S

030 35

te t Ra Inpu city apa on C Gall as ral G Natu

rt Sho Gas tial den Resi

T&P

N

This is a short residential natural gas 30 gallon water heater with 35,500 Btu/Hr input rate.

T&P

FRONT VIEW Nat. Gas LP Gas

Model Gal. Btu/Hr Btu/Hr Energy 1st Hr. GPH @ Gas Water Vent Ship. Number Cap. Input Input Factor Rating 90°F Rise A B C D E F Conn. Conn. Size Wt.

Energy Saver with Insulation Blanket - Short Models GSN030 35B 30 35,500 32,000 0.63 62 36 50” 18” 46-1/4” 40” 12” 8” 1/2” 3/4” 3” or 4” GSN040 40B 40 40,000 36,000 0.62 69 41 51-1/2” 20” 47-3/4” 41-1/4” 12” 8” 1/2” 3/4” 3” or 4” Energy Saver - Short Models GSN030 35 30 35,500 32,000 0.63 64 36 50” 20” 46-1/4” 40” 12” 8” 1/2” 3/4” 3” or 4” GSN040 40 40 40,000 36,000 0.62 70 41 51-1/2” 22” 47-3/4” 41-1/4” 12” 8” 1/2” 3/4” 3” or 4” GSN050 40 50 40,000 40,000 0.60 93  41 53”  24” 49-1/4” 41-1/2” 12” 8” 1/2” 3/4” 3” or 4”  Energy Saver with Insulation Blanket - Tall Models GTN030 35B 30 35,500 32,000 0.63 64 36 61-3/4” 16” 58” 51-3/4” 12-1/4” 8” 1/2” 3/4” 3” or 4” GTN040 40B 40 40,000 36,000 0.62 70 41 62” 18” 58-1/4” 52” 12-1/4” 8” 1/2” 3/4” 3” or 4” GTN050 60B* 50 60,000 54,000 0.60 98 61 65-1/2” 22” 61” 54-1/4” 13-1/2” 8” 1/2” 3/4” 4” Energy Saver - Tall Models GTN030 35 30 35,500 32,000 0.63 67 36 61-3/4” 18” 58” 51-3/4” 12-1/4” 8” 1/2” 3/4” 3” or 4” GTN040 35 40 35,500 N/A 0.62 67 36 62” 20” 58-1/4” 52” 12-1/4” 8” 1/2” 3/4” 3” or 4” GTN040 40* 40 40,000 36,000 0.62 70 41 62” 20” 58-1/4” 52” 12-1/4” 8” 1/2” 3/4” 3” or 4” GTN040 50* 40 50,000 N/A 0.62 75 51 62” 20” 58-1/4” 52” 12-1/4” 8” 1/2” 3/4” 4” GTN050 40* 50 40,000 37,000 0.60 88 41 60-3/4” 21” 57-1/4” 50-1/2” 12-1/4” 8” 1/2” 3/4” 3” or 4” GTN050 50* 50 50,000 45,000 0.60 92 58 60-3/4” 22” 57-1/4” 50-1/2” 12-1/4” 8” 1/2” 3/4” 4” GTN055 60* 55 60,000 54,000 0.59 103 61 60” 24” 55-1/2” 48” 13-1/2” 8” 1/2” 3/4” 4”

110 134 118 135 177 132 158 190 123 150 150 150 148 165 189

Notes: In the model number, “N” indicates Natural gas; replace “N” with “L” to indicate L.P. gas models * Optional Side Tappings are available on these models. Add “ST” to the end of the model number (Ex: GTN04040ST).

Certified for Potable Water and Space Heating Applications This water heater is suitable for water heating and space heating. Toxic chemicals, such as those used for boiler water treatment shall NEVER be introduced into this system. This water heater may NEVER be connected to any existing heating system or components previously used with nonpotable water heating appliances.

Lochinvar, LLC 300 Maddox Simpson Parkway Lebanon, Tennessee 37090 P: 615.889.8900 / F: 615.547.1000

www.Lochinvar.com

RG-08 (Replaces RG-07

10/13)

PDP-5M-12/14-Printed in U.S.A.

Large Capacity Gas Water Heaters Large Capacity Models Lochinvar’s Large Capacity gas models are available in 75 and 100 gallon capacities for residential and light commercial applications.

Standard Features • Code Compliance – Meets the thermal efficiency and standby loss requirements of ASHRAE/IES 90.1. Meets UBC, CEC and ICC national codes. • Gas Control – The gas valve features simple operation, accurate temperature control and a push-button piezo igniter. The valve is powered by a thermopile pilot requiring no external power source. • Glass-Lined Steel Tank – The durable glass lining is fused to the steel tank at 1600°F to assure lasting protection against rust and corrosion while providing clear, clean hot water. 300 PSI test pressure; 150 PSI working pressure. • Non-CFC Foam Insulation – A uniform coverage of thick closedcell foam insulation minimizes standby heat loss and maximizes heat retention. • Tank Saver Anode – A large diameter, high capacity anode inhibits corrosion of the tank interior for long, trouble-free service. • Temperature & Pressure Relief Valve – Factory installed for optimum safety. • Brass Drain Valve – An enhanced ball valve design for effective drainage and positive shut-off. • 6 Year Limited Tank & Parts Warranty* – See warranty sheet for details. • 10 Year Extended Warranty – Available for residential applications only.

*1-year limited tank & parts warranty when installed in a commercial application.

All models meet or exceed the NAECA and ASHRAE Energy Efficiency Standards

Dimensions and Specifications: TOP VIEW

F FOR EASE IN ORDERING BY MODEL NUMBER T&P VALVE

L

C

COLD CONNECTION

HOT CONNECTION

N

075 75

te t Ra Inpu city apa on C Gall as ral G Natu

D

A

Tall Gas tial den Resi

B

T

This is a tall residential natural gas 75 gallon water heater with 75,100 Btu/Hr input rate.

HOT

E

FRONT VIEW

Nat. Gas LP Gas Gas Water Vent Ship. Model Gal. Btu/Hr Btu/Hr GPH @ B C D E F Conn. Conn. Size Wt. Number Cap. Input Input 90°F Rise A Large Capacity Models LTN075 75* 74 75,100 75,100 81 61” 26-1/2” 58-1/2” 50-1/4” 15-1/4” 16” 1/2” 1” 4” 275 LTN100 75 98 75,100 75,100 81 68-1/2” 27-3/4” 66-1/2” 57-1/2” 15-1/4” 16” 1/2” 1-1/4” 4” 350 Notes: In the model number, “N” indicates Natural gas; replace “N” with “L” to indicate L.P. gas models. In the model number, change “L” to “X” for 10-year tank and 6-year parts warranty. * Optional Side Tappings are available on the LTN07575 models only. Add “ST” to the end of the model number (Ex: LTN07575ST).

Certified for Potable Water and Space Heating Applications This water heater is suitable for water heating and space heating. Toxic chemicals, such as those used for boiler water treatment shall NEVER be introduced into this system. This water heater may NEVER be connected to any existing heating system or components previously used with non-potable water heating appliances.

Lochinvar, LLC 300 Maddox Simpson Parkway Lebanon, Tennessee 37090 P: 615.889.8900 / F: 615.547.1000

www.Lochinvar.com

RLC-01 (New)

PDP-5M-12/14–Printed in U.S.A.

Power Vented Residential Gas Water Heaters Power Vented Water Heaters Lochinvar’s Power Vented residential gas models are available in 40, 50 and 75 gallon capacities, feature a power vent system for sidewall or rooftop termination and are qualified for ENERGY STAR.

Standard Features

• ENERGY STAR® - The Power Vented water heaters meet the ENERGY STAR requirement with .68 and .70 Energy Factors and are eligible for most utility rebate programs. • Code Compliance – The Power Vented water heater meets the National Appliance Energy Conservation Act (NAECA) Energy Factor requirements effective April 16, 2015. Meets the thermal efficiency and standby loss requirements of ASHRAE/IES 90.1. • Power Vented Exhaust System – A quiet and efficient blower provides power vent operation through 2”, 3” or 4” PVC, CPVC or Polypropylene vent pipe and plug into a standard 110v/120v outlet with a 6 foot power cord. The vent may terminate through a sidewall or the roof and may run up to 180 equivalent feet. • Flammable Vapor Ignition Resistant – An air intake snorkel elevates the combustion air openings which prevents flammable vapors from entering the combustion chamber. • Electronic Gas Control – The gas valve features hot surface ignition, control logic for precise temperature control and an LED status indictor for simplified service diagnostics. The design includes a safety thermal high limit switch, a flammable vapor sensor and protection from lint, dust and oil buildup. • Glass-Lined Steel Tank – The durable glass lining is fused to the steel tank at 1600°F to assure lasting protection against rust and corrosion while providing clear, clean hot water. 300 PSI test pressure; 150 PSI working pressure. • Non-CFC Foam Insulation – A uniform coverage of thick closed-cell foam insulation minimizes standby heat loss, maximizes heat retention and delivers a high Energy Factor. • Tank Saver Anode – A large diameter, high capacity anode inhibits corrosion of the tank interior for long, trouble-free service. • Heat Trap – Heat traps are built into the inlet and outlet connections to eliminate heat migration and heat loss in the water piping. • Sight Glass – A built-in sight glass provides an unobstructed view of the burner and pilot flame. • Temperature & Pressure Relief Valve – Factory installed for optimum safety. • Brass Drain Valve – An enhanced ball valve design for effective drainage and positive shut-off. • 6 Year Limited Tank & Parts Warranty* – See warranty sheet for details. • 10 Year Extended Warranty – Available for residential applications only. * 1-year limited tank & parts warranty when installed in a commercial application.

All models meet or exceed the NAECA and ASHRAE Energy Efficiency Standards preliminary as of january 6, 2015 - details subject to change

Dimensions and Specifications:

Max. Vent Length (Total equivalent feet) 2”

3”

4”

PVN040 40

50

125

180

PVN040 50

50

125

180

PVN050 40

50

125

180

PVN050 50

50

125

180

PVN050 65ST

N/A

50

125

PVN075 75ST

N/A

50

125

TOP VIEW

Model Gal. Btu/hr Energy 1st Hr. GPH @ Gas Vent Water Ship. Number Cap. Input Factor Rating 90°F Rise A B C D E F Conn. Diam. Conn. Wt. Power Vented Models PVN040 40 40 40,000 0.70 73 45 59” 22” 49-3/4” 42-1/2” 14-1/4” N/A 1/2” 3/4” 2”, 3” or 4” 174 PVN040 50 40 50,000 0.70 90 56 68-1/2” 20” 59-1/4” 53-1/4” 14-1/4” 15-1/4” 1/2” 3/4” 2”, 3” or 4” 176 PVN050 40 50 40,000 0.70 90 45 60-1/4” 24” 50-3/4” 43-3/4” 14-1/4” N/A 1/2” 3/4” 2”, 3” or 4” 198 PVN050 50 50 50,000 0.70 96 56 68-1/4” 22” 58-3/4” 51-3/4” 14-1/4” 15-1/4” 1/2” 3/4” 2”, 3” or 4” 192 PVN050 65ST 50 62,000 0.70 110 70 61-1/4” 24” 52” 44-1/2” 14-1/4” 15-1/4” 1/2” 3/4” 3” or 4” 212 PVN075 75ST 75 72,000 0.68 155 81 70-3/4” 26” 61-1/4” 53” 14-1/4” 15-1/4” 1/2” 3/4” 3” or 4” 277 Notes: In the model number, “N” indicates Natural gas; replace “N” with “L” to indicate L.P. gas models. For the 50,000 Btu models, add “ST” to the model number for optional Side Tappings. (Ex: PVN05050ST) Side Tappings are standard on 62,000 and 72,000 Btu models and not available on 40,000 Btu models.

FOR EASE IN ORDERING BY MODEL NUMBER PV

040 40

t npu hr I Btu/ city apa on C Gall as ral G Natu

d ente er V Pow

Certified for Potable Water and Space Heating Applications This water heater is suitable for water heating and space heating. Toxic chemicals, such as those used for boiler water treatment shall NEVER be introduced into this system. This water heater may NEVER be connected to any existing heating system or components previously used with non-potable water heating appliances.

N

This is a Power Vented, residential, natural gas 40 gallon water heater with 40,000 Btu/hr input.

Lochinvar, LLC 300 Maddox Simpson Parkway Lebanon, Tennessee 37090 P: 615.889.8900 / F: 615.547.1000

www.Lochinvar.com

PVN-02 Replaces PVN-01 - 6/14)

PDP-5M © Lochinvar, LLC - 12/14 - Printed in U.S.A.

Power Direct Vent Models

Power Direct Vent Residential Gas Water Heaters

Lochinvar’s Power Direct Vent residential gas models are available in 40, 50 and 75 gallon capacities, feature a power direct vent system for sidewall or rooftop termination and are qualified for ENERGY STAR.

Standard Features

• ENERGY STAR® - The Power Direct Vent water heaters meet the ENERGY STAR requirement with .69, .70 and .71 Energy Factors and are eligible for most utility rebate programs. • Code Compliance – The Power Direct Vent water heater meets the National Appliance Energy Conservation Act (NAECA) Energy Factor requirements effective April 16, 2015. Meets the thermal efficiency and standby loss requirements of ASHRAE/IES 90.1. Meets UBC, CEC and HUD national codes. • Power Direct Vent System – This 2-pipe closed combustion system utilizes a vent to exhaust the byproducts of combustion and a separate air intake to provide fresh combustion air. Vents through a sidewall or through the roof using 2”, 3” or 4” PVC, CPVC or Polypropylene vent material. The design is Flammable Vapor Ignition Resistant. • Electronic Gas Control – The gas valve features electronic ignition, control logic for precise temperature control and an LED status indictor for simplified service diagnostics. • Glass-Lined Steel Tank – The durable glass lining is fused to the steel tank at 1600°F to assure lasting protection against rust and corrosion while providing clear, clean hot water. 300 PSI test pressure; 150 PSI working pressure. • Non-CFC Foam Insulation – A uniform coverage of thick closed-cell foam insulation minimizes standby heat loss, maximizes heat retention and delivers a high Energy Factor. • Tank Saver Anode – A large diameter, high capacity anode inhibits corrosion of the tank interior for long, trouble-free service. • Heat Trap – Heat traps are built into the inlet and outlet connections to eliminate heat migration and heat loss in the water piping. • Sight Glass – A built-in sight glass provides an unobstructed view of the burner and pilot flame. • Temperature & Pressure Relief Valve – Factory installed for optimum safety. • Brass Drain Valve – An enhanced ball valve design for effective drainage and positive shut-off. • 6 Year Limited Tank & Parts Warranty* – See warranty sheet for details. • 10 Year Extended Warranty – Available for residential applications only. * 1-year limited tank & parts warranty when installed in a commercial application.

All models meet or exceed the NAECA and ASHRAE Energy Efficiency Standards preliminary as of january 6, 2015 - details subject to change

Dimensions and Specifications

SIDE TAPPING

B

A C D SIDE TAPPING

F

E

Model Gal. Btu/hr Energy 1st Hr. GPH @ Number Cap. Input Factor Rating 90°F Rise A B C D E F PRN040 40ES 40 40,000 0.71 71 45 58-1/4" 22" 49-1/2" 42-1/2" 13-1/4" 15-1/4" PRN050 45ES 50 45,000 0.70 93 50 67-1/2" 22" 58-3/4" 51-3/4" 13-1/4" 15-1/4" PRN050 65ESST 50 62,000* 0.71 115 73 69" 22" 60-1/4" 52-3/4" 13-1/4" 15-1/4" PRN075 70ESST 75 72,000 0.69 154 82 70-3/4" 26" 60-1/2" 53" 13-1/4" 15-1/4"

Notes: In the model number, "N" indicates Natural gas; replace "N" with "L" to indicate L.P. gas models.. For PRN04040ES & PRN05045ES, add "ST" to the model number for optional Side Tappings. (Ex: PRN04040ESST) * Propane model rated for 58,000 Btu/hr

Vent Kits 2" Concentric Vent Kit 3" Concentric Vent Kit 2" Vent Kit * 3" Vent Kit * High Ambient Air Kit **

Ship. Wt. 174 192 200 277

FOR EASE IN ORDERING BY MODEL NUMBER P

R

N

050

65

ES

ST

GS PIN AP ET SID AR ST GY ER EN T PU IN HR U/ BT N LLO CITY GA PA CA S GA T. L NA TIA EN SID RE T ER EN W TV PO IREC D

Certified for Potable Water and Space Heating Applications This water heater is suitable for water heating and space heating. Toxic chemicals, such as those used for boiler water treatment shall NEVER be introduced into this system. This water heater may NEVER be connected to any existing heating system or components previously used with non-potable water heating appliances.

Gas Water Air Intake Vent Conn. Conn. Sizes Sizes 1/2" 3/4" 2", 3" or 4" 2", 3" or 4" 1/2" 3/4" 2", 3" or 4" 2", 3" or 4" 1/2" 3/4" 3" or 4" 3" or 4" 1/2" 3/4" 3" or 4" 3" or 4"

This heater is a 62,000 Btu/hr Power Direct Vent natural gas water heater with a 50 gallon storage capacity and side tappings.

Part Number 9008586005 9006328005 330828-000 330851-000 9009024015

* Vent Kit includes: Coupling, Termination elbows and Sound Suppressor ** High Ambient Air Kit must be installed with CPVC vent material only

Lochinvar, LLC 300 Maddox Simpson Parkway Lebanon, Tennessee 37090 P: 615.889.8900 / F: 615.547.1000

www.Lochinvar.com

RPD-09 (Replaces RPD-08 11/14)

PDP-5M-12/14–Printed in U.S.A.

Ultra Low NOx Residential Gas Water Heaters Ultra Low NOx Models Lochinvar’s Ultra Low NOx residential gas models are available in 30, 40 and 50 gallon capacities in short and tall configurations. The Ultra Low NOx burner meets 10 ng/j NOx requirement for the South Coast Air Quality Management District.

Standard Features • South Coast Approved – The patented radial burner design reduces NOx emissions to 10 ng/j of NOx which complies with South Coast Rule 1121 for low NOx performance. • Code Compliance – The Ultra Low NOx water heater meets the National Appliance Energy Conservation Act (NAECA) Energy Factor requirements effective April 16, 2015. Meets the thermal efficiency and standby loss requirements of ASHRAE/IES 90.1. Meets UBC, CEC and HUD national codes. • Flammable Vapor Ignition Resistant – Combustion air is directed through a stainless steel flame arrestor plate specifically designed to prevent flame rollout and flammable vapor ignition. The design includes a safety thermal switch and protection from lint, dust and oil buildup. • Electronic Gas Control – The gas valve features an internal microprocessor for precise temperature control, fast response and an LED status indictor for simplified service diagnostics. The valve is powered by a thermopile pilot requiring no external power source. • Glass-Lined Steel Tank – The durable glass lining is fused to the steel tank at 1600°F to assure lasting protection against rust and corrosion while providing clear, clean hot water. 300 PSI test pressure; 150 PSI working pressure. • Non-CFC Foam Insulation – A uniform coverage of thick closed-cell foam insulation minimizes standby heat loss, maximizes heat retention and delivers a high Energy Factor. • Tank Saver Anode – A large diameter, high capacity anode inhibits corrosion of the tank interior for long, trouble-free service. • Heat Trap – Heat traps are built into the inlet and outlet connections to eliminate heat migration and heat loss in the water piping. • Sight Glass – A built-in sight glass provides an unobstructed view of the burner and pilot flame. • Temperature & Pressure Relief Valve – Factory installed for optimum safety. • Brass Drain Valve – An enhanced ball valve design for effective drainage and positive shut-off. • 6 Year Limited Tank & Parts Warranty* – See warranty sheet for details. • 10 Year Extended Warranty – Available for residential applications only.* 1-year limited tank & parts warranty when installed in a commercial application.

All models meet or exceed the NAECA and ASHRAE Energy Efficiency Standards preliminary as of january 6, 2015 - details subject to change

Dimensions and Specifications

Model Gal. Btu/Hr Energy 1st Hr. GPH @ Gas Number Cap. Input Factor Rating 90°F Rise A B C D E F Conn. Ultra Low NOx - Short Model USN040 40 40 40,000 0.62 71 41 51-1/2” 22” 47-3/4” 41-1/4” 12” 8” 1/2” Ultra Low NOx with Insulation Blanket - Tall Models UTN040 40B 40 40,000 0.62 71 41 62” 18” 58-1/4” 52” 12” 8” 1/2” Ultra Low NOx - Tall Models UTN030 30 30 33,000 0.63 55 34 61-3/4” 16” 58” 51-3/4” 12” 8” 1/2” UTN040 40 40 40,000 0.62 71 41 62” 20” 58-1/4” 52” 12” 8” 1/2” UTN050 40 50 40,000 0.60 TBD 42 60-3/4” 20” 57-1/4” 50-1/2” 12” 8” 1/2” Notes: Ultra Low NOx models are available in Natural Gas ONLY.

Water Vent Conn. Size

Ship. Wt.

3/4”

3” or 4”

138

3/4”

3” or 4”

TBD

3/4” 3/4” 3/4”

3” or 4” 3” or 4” 3” or 4”

126 153 TBD

.

For Ease In Ordering By Model Number U

T

N

030 30

hr Btu/ t Inpu city apa on C Gall as ral G Natu

Tall Ox wN a Lo Ultr

Certified for Potable Water and Space Heating Applications This water heater is suitable for water heating and space heating. Toxic chemicals, such as those used for boiler water treatment shall NEVER be introduced into this system. This water heater may NEVER be connected to any existing heating system or components previously used with non-potable water heating appliances.

This is a tall residential Ultra Low NOx natural gas 30 gallon water heater with 33,000 Btu/hr input.

For Power Vented Models, see the “Ultra-Low NOx Power Vented Residential Gas Water Heaters” literature sheet.

Lochinvar, LLC 300 Maddox Simpson Parkway Lebanon, Tennessee 37090 P: 615.889.8900 / F: 615.547.1000

www.Lochinvar.com

RGU-04 (Replaces RGU-03 10/14)

PDP-5M-12/14–Printed in U.S.A.

Ultra Low NOx Power Vent Models

Ultra Low NOx Power Vent Residential Gas Water Heaters

Lochinvar’s Ultra Low NOx Power Vent residential gas models are available in 40 and 50 gallon capacities and feature a power vent system for sidewall or rooftop termination. The Ultra Low NOx Power Vent models meet 10 ng/j NOx requirement for the South Coast Air Quality Management District and at 0.68 Energy Factor, they qualify for ENERGY STAR®.

Standard Features • South Coast Approved – The patented radial burner design reduces NOx emissions to 10 ng/j of NOx which complies with South Coast Rule 1121 for low NOx performance. • ENERGY STAR® - The Ultra Low NOx Power Vent water heater meets the ENERGY STAR requirement with .68 Energy Factor and is eligible for most utility rebate programs. • Code Compliance – The Ultra Low NOx Power Vent water heater meets the National Appliance Energy Conservation Act (NAECA) Energy Factor requirements effective April 16, 2015. Meets the thermal efficiency and standby loss requirements of ASHRAE/IES 90.1. Meets CEC code. • Power Venting – A quiet and efficient blower provides power vent operation through 2” or 3” PVC or CPVC vent pipe and plug into a standard 110v/120v outlet with a 6 foot power cord. • Flammable Vapor Ignition Resistant – Combustion air is directed through a stainless steel flame arrestor plate specifically designed to prevent flame rollout and flammable vapor ignition. The design includes a safety thermal switch and protection from lint, dust and oil buildup. • Electronic Gas Control – The gas valve features electronic ignition, control logic for precise temperature control and an LED status indictor for simplified service diagnostics. • Glass-Lined Steel Tank – The durable glass lining is fused to the steel tank at 1600°F to assure lasting protection against rust and corrosion while providing clear, clean hot water. 300 PSI test pressure; 150 PSI working pressure. • Non-CFC Foam Insulation – A uniform coverage of thick closed-cell foam insulation minimizes standby heat loss, maximizes heat retention and delivers a high Energy Factor. • Tank Saver Anode – A large diameter, high capacity anode inhibits corrosion of the tank interior for long, trouble-free service. • Heat Trap – Heat traps are built into the inlet and outlet connections to eliminate heat migration and heat loss in the water piping. • Sight Glass – A built-in sight glass provides an unobstructed view of the burner and pilot flame. • Temperature & Pressure Relief Valve – Factory installed for optimum safety. • Brass Drain Valve – An enhanced ball valve design for effective drainage and positive shut-off. • 6 Year Limited Tank & Parts Warranty* – See warranty sheet for details. • 10 Year Extended Warranty – Available for residential applications only. * 1-year limited tank & parts warranty when installed in a commercial application.

All models meet or exceed the NAECA and ASHRAE Energy Efficiency Standards preliminary as of january 6, 2015 - details subject to change

Dimensions and Specifications BLOWER TOP VIEW

BLOWER

G EXHAUST OUTLET F

G

EXHAUST OUTLET

E F

E

FRONT VIEW Model Gal. Btu/Hr Energy 1st Hr. GPH @ Gas Water Vent Ship. Number Cap. Input Factor Rating 90°F Rise A B C D E F G Conn. Conn. Size Wt. Ultra Low NOx Power Vented Models UPN040 40ES 40 42,000 0.68 69 43 67” 20” 58-3/4” 51-1/2” 12-1/4” 8” 25” 1/2” 3/4” 2” or 3” 170 UPN050 40ES 50 42,000 0.68 81 43 65-3/4” 22” 57-1/2” 51” 12-1/4” 8” 27” 1/2” 3/4” 2” or 3” 207 Notes: Ultra Low NOx Power Vent models are available in Natural gas ONLY. .

For Atmospheric Models, see the “Ultra-Low NOx Residential Gas Water Heaters” literature sheet.

For Ease In Ordering By Model Number U

P

N

040 40

ES

Star rgy Ene hr Btu/ t Inpu city apa on C Gall as ral G Natu ent er V Pow Ox wN a Lo Ultr

Certified for Potable Water and Space Heating Applications This water heater is suitable for water heating and space heating. Toxic chemicals, such as those used for boiler water treatment shall NEVER be introduced into this system. This water heater may NEVER be connected to any existing heating system or components previously used with non-potable water heating appliances.

This is a residential power vent Ultra Low NOx natural gas 40 gallon water heater with 40,000 Btu/hr input. This unit is also Energy Star rated.

Lochinvar, LLC 300 Maddox Simpson Parkway Lebanon, Tennessee 37090 P: 615.889.8900 / F: 615.547.1000

www.Lochinvar.com

RUP-01 (New)

© PDP-5M-12/14–Printed in U.S.A.

High Efficiency Residential Gas Water Heaters High Efficiency Models Lochinvar’s High Efficiency residential gas models are available in 40 and 50 gallon capacities in short and tall configurations and are qualified for ENERGY STAR®.

Standard Features • ENERGY STAR® - The High Efficiency water heaters meet the ENERGY STAR requirement with .67 Energy Factor and are eligible for most utility rebate programs. • Code Compliance – The High Efficiency water heater meets the National Appliance Energy Conservation Act (NAECA) Energy Factor requirements effective April 16, 2015. Meets the thermal efficiency and standby loss requirements of ASHRAE/IES 90.1. Meets UBC, CEC, SBCC, HUD and BOCA national codes. • Flammable Vapor Ignition Resistant – Combustion air is directed through a flame arrestor plate specifically designed to prevent flame rollout and flammable vapor ignition. • Electronic Gas Control – The gas valve features electronic ignition, control logic for precise temperature control and an LED status indictor for simplified service diagnostics. Energy Star water heaters plug into a standard 110v/120v outlet and include a 10 foot power cord. • Low NOx Burner – The patented radial burner design reduces NOx emissions by more than 33% delivering less than 40 ng/j of NOx. • Flue Damper – An automatic flue damper opens and closes to reduce heat loss up the vent during standby mode. • Glass-Lined Steel Tank – The durable glass lining is fused to the steel tank at 1600°F to assure lasting protection against rust and corrosion while providing clear, clean hot water. 300 PSI test pressure; 150 PSI working pressure. • Non-CFC Foam Insulation – A uniform coverage of thick closed-cell foam insulation minimizes standby heat loss, maximizes heat retention and delivers a high Energy Factor. • Tank Saver Anode – A large diameter, high capacity anode inhibits corrosion of the tank interior for long, trouble-free service. • Heat Trap – Heat traps are built into the inlet and outlet connections to eliminate heat migration and heat loss in the water piping. • Sight Glass – A built-in sight glass provides an unobstructed view of the burner and pilot flame. • Temperature & Pressure Relief Valve – Factory installed for optimum safety. • Brass Drain Valve – An enhanced ball valve design for effective drainage and positive shut-off. • 6 Year Limited Tank & Parts Warranty* – See warranty sheet for details. • 10 Year Extended Warranty – Available for residential applications only. *1-year limited tank & parts warranty when installed in a commercial application.

All models meet or exceed the NAECA and ASHRAE Energy Efficiency Standards preliminary as of january 6, 2015 - details subject to change

COLD Dimensions and Specifications: CONNECTION F B

FOR EASE IN ORDERING BY MODEL NUMBER

ANODE ROD

G

D

C

N

COLD CONNECTION

A F B

040 40

ES

Star rgy Ene te t Ra Inpu city apa on C Gall as ral G Natu

T&P VALVE 1/2" GAS CONNECTION

T

Tall Gas tial den Resi

HOT CONNECTION

This is a tall residential natural gas 40 gallon water heater with 40,000 Btu/Hr input rate with Energy Star endorsement.

E T&P VALVE



Model Number

Gal. Cap.

1/2" GAS

C

A

CONNECTION Nat. Gas LP Gas D Btu/Hr Btu/Hr Energy 1st Hr. GPH @ Input Input Factor Rating 90°F Rise A B C D E F

Gas Water Conn. Conn.

Vent Size

Ship. Wt.

High Efficiency Short Models GSN040 40ES 40 40,000 36,000 0.67 67 42 54” 22” 47-3/4” 41” 13” 8” 1/2” 3/4” 3” or 4” 149 E High Efficiency Tall Models GTN040 40ES 40 40,000 36,000 0.67 67 42 64-1/4” 20” 58-1/4” 51-3/4” 13” 8” 1/2” 3/4” 3” or 4” 152 GTN050 40ES 50 40,000 37,000 0.67 81 42 63-1/2” 22” 57-1/4” 50-1/4” 13” 8” 1/2” 3/4” 3” or 4” 167 Notes: “N” indicates Natural gas, replace “N” with “L” to indicate LP gas model.

Certified for Potable Water and Space Heating Applications This water heater is suitable for water heating and space heating. Toxic chemicals, such as those used for boiler water treatment shall NEVER be introduced into this system. This water heater may NEVER be connected to any existing heating system or components previously used with non-potable water heating appliances.

Lochinvar, LLC 300 Maddox Simpson Parkway Lebanon, Tennessee 37090 P: 615.889.8900 / F: 615.547.1000

www.Lochinvar.com

RES-01 (New)

PDP-5M-12/14–Printed in U.S.A.

Manufactured Home Models

Manufactured Home Residential Gas Water Heater

Lochinvar’s Manufactured Home residential gas models are available in 30, 40 and 50 gallon capacities in atmospheric and direct vent configurations. Meets HUD requirements for manufactured home installations.

Standard Features • Code Compliance – The Manufactured Home water heater meets the National Appliance Energy Conservation Act (NAECA) Energy Factor requirements effective April 16, 2015. Meets the thermal efficiency and standby loss requirements of ASHRAE/IES 90.1. Meets UBC, CEC and HUD national codes. • Flammable Vapor Ignition Resistant – With Direct Vent models, combustion air may be pulled through an air intake pipe to separate the combustion chamber from the installed space to eliminate flammable vapor ignition. • Electronic Gas Control – The gas valve features precise temperature control, fast response and an LED status indictor for simplified service diagnostics. The valve is powered by a thermopile pilot requiring no external power source. • Low NOx Burner – The patented radial burner design reduces NOx emissions by more than 33% delivering less than 40 ng/j of NOx. • Glass-Lined Steel Tank – The durable glass lining is fused to the steel tank at 1600°F to assure lasting protection against rust and corrosion while providing clear, clean hot water. 300 PSI test pressure; 150 PSI working pressure. The vessel also includes ¾” side mount inlet connection. • Non-CFC Foam Insulation – A uniform coverage of thick closed-cell foam insulation minimizes standby heat loss, maximizes heat retention and delivers a high Energy Factor. • Tank Saver Anode – A large diameter, high capacity anode inhibits corrosion of the tank interior for long, trouble-free service. • Heat Trap – Heat traps are built into the inlet and outlet connections to eliminate heat migration and heat loss in the water piping. • Sight Glass – A built-in sight glass provides an unobstructed view of the burner and pilot flame. • Temperature & Pressure Relief Valve – Factory installed for optimum safety. • Brass Drain Valve – An enhanced ball valve design for effective drainage and positive shut-off. • 6 Year Limited Tank & Parts Warranty* – See warranty sheet for details. • 10 Year Extended Warranty – Available for residential applications only. * 1-year limited tank & parts warranty when installed in a commercial application.

All models meet or exceed the NAECA and ASHRAE Energy Efficiency Standards preliminary as of january 6, 2015 - details subject to change

HOT WATER OUTLET CONNECTION 3/4˝ NIPPLE SUPPLIED

Dimensions and Specifications TOP VIEW ANODE ROD

T&P VALVE HOT WATER OUTLET CONNECTION 3/4˝ NIPPLE SUPPLIED

B A

C

COLD WATER INLET CONNECTION, 3/4˝ NIPPLE SUPPLIED

D

E

M

G

N

030

30

T&P VALVE

t npu Hr I Btu/ city apa on C Gall as ral G Natu ent ct V Dire d ture ufac Man me Ho

F

FOR EASE IN ORDERING BY MODEL NUMBER

B

Manufactured Homes Direct Vent / Closed Combustion

Design evaluated in accordance with the H.U.D. Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280.707 (d)(2) for energy efficiency.

This is a manufactured A home, direct vent, natural gas C 30 gallon water heater COLD WATER INLET with 30 Btu/hr input.

D

GAS CONNECTOR FRONT VIEW 1/2˝ FEMALE

CONNECTION, 3/4˝ NIPPLE SUPPLIED

Nat. Gas LP Gas F Model Gal. Btu/Hr Btu/Hr Energy 1st Hr. GPH @ Gas Water Vent Ship. E Number Cap. Input Input Factor Rating 90°F Rise A B C D E F Conn. Conn. Size Wt. Direct Vent Models GAS CONNECTOR MGN030 30 30 30,000 29,000 0.63 49 31 61” 18” 58” 52-1/2” 13” 14-1/4” 1/2” 3/4” 3” 129 1/2˝ FEMALE MGN040 30 40 32,000 29,000 0.62 61 33 61-3/4” 20” 58-3/4” 52-1/4” 13” 14-1/4” 1/2” 3/4” 3” 153 MGN050 40 50 40,000 37,000 0.60 77 39 60” 22” 57” 50” 13” 14-1/4” 1/2” 3/4” 3” 168 Atmospheric Vent Models MFN030 35 30 35,500 32,000 0.63 55 36 61-1/2” 18” 58” 52” 13” 14-1/4” 1/2” 3/4” 3” or 4” 129 MFN040 35 40 35,500 32,000 0.62 62 36 61-3/4” 20” 58-1/4” 51-3/4” 13” 14-1/4” 1/2” 3/4” 3” or 4” 153

Optional Equipment Roof Jack Kit – Manufactured Home water heaters must be installed with one of the approved Roof Jack Kits listed on the table. This kit is ordered separately and must be installed per the installation instructions. Specify roof jack kit size when ordering. Air Inlet Kit – An optional Air Inlet kit is available for Direct Vent models installed over open subfloor spaces. The kit allows for horizontal air intake piping up to 30 feet with Schedule 40 PVC pipe. Order kit number 9002986005 for 30 and 40 gallon models. Order kit number 9002987005 for 50 gallon models.

Roof Jack Kits Kit Number Min. Max. Ship. Wt. 9002964005 - 12” 10 9002965005 17” 32” 13 9002966005 32” 60” 17 9002967005 49” 96” 22 Certified for Potable Water and Space Heating Applications This water heater is suitable for water heating and space heating. Toxic chemicals, such as those used for boiler water treatment shall NEVER be introduced into this system. This water heater may NEVER be connected to any existing heating system or components previously used with nonpotable water heating appliances.

Lochinvar, LLC 300 Maddox Simpson Parkway Lebanon, Tennessee 37090 P: 615.889.8900 / F: 615.547.1000

www.Lochinvar.com

MFH-07 (Replaces MFH-06 -6/14)

PDP-5M © Lochinvar, LLC - 12/14 - Printed in U.S.A.

Balanced Flue Direct Vent Models

Balanced Flue Direct Vent Residential Gas Water Heaters

Lochinvar’s Balanced Flue Direct Vent residential gas models are available in 40 and 50 gallon capacities and feature a sealed combustion, direct vent system for sidewall or rooftop termination.

Standard Features

• Code Compliance – The Balanced Flue Direct Vent water heater meets the National Appliance Energy Conservation Act (NAECA) Energy Factor requirements effective April 16, 2015. Meets the thermal efficiency and standby loss requirements of ASHRAE/ IES 90.1. Meets UBC, CEC and HUD national codes. • Balanced Flue Direct Vent System – This 2-pipe closed combustion system utilizes a vent to exhaust the byproducts of combustion and a separate air intake to provide fresh combustion air. Each model comes with the concentric vent pipe up to 80 inches plus termination cap. The design is also Flammable Vapor Ignition Resistant. • Electronic Gas Control – The gas valve features electronic ignition, control logic for precise temperature control and an LED status indictor for simplified service diagnostics. The valve is powered by a thermopile pilot requiring no external power source. • Glass-Lined Steel Tank – The durable glass lining is fused to the steel tank at 1600°F to assure lasting protection against rust and corrosion while providing clear, clean hot water. 300 PSI test pressure; 150 PSI working pressure. • Non-CFC Foam Insulation – A uniform coverage of thick closedcell foam insulation minimizes standby heat loss, maximizes heat retention and delivers a high Energy Factor. • Tank Saver Anode – A large diameter, high capacity anode inhibits corrosion of the tank interior for long, trouble-free service. • Heat Trap – Heat traps are built into the inlet and outlet connections to eliminate heat migration and heat loss in the water piping. • Sight Glass – A built-in sight glass provides an unobstructed view of the burner and pilot flame.

All models include vent pipe and outside vent cap as shown in the images.

• Temperature & Pressure Relief Valve – Factory installed for optimum safety. • Brass Drain Valve – An enhanced ball valve design for effective drainage and positive shut-off. • 6 Year Limited Tank & Parts Warranty* – See warranty sheet for details. • 10 Year Extended Warranty – Available for residential applications only. * 1-year limited tank & parts warranty when installed in a commercial application.

All models meet or exceed the NAECA and ASHRAE Energy Efficiency Standards preliminary as of january 6, 2015 - details subject to change

Dimensions and Specifications

FOR EASE IN ORDERING BY MODEL NUMBER G

B

N

050

40

t npu hr I Btu/ city apa on C Gall as ral G Natu

Flue nced Bala Gas tial den Resi

This is a Balanced Flue, Direct Vent, natural gas 50 gallon water heater with 40,000 Btu/hr input.

Model Gal. Btu/hr Energy 1st Hr. GPH @ Gas Water Coaxial Number Cap. Input Factor Rating 90°F Rise A B C D E F G Conn. Conn. Vent

GBN040 40* 40 GBN050 40* 50 GBN050 50* 50

38,000 40,000 47,000

0.63 0.62 0.61

72 91 92

41 43 51

49-3/4” 59” 60”

22” 22” 22”

42-1/2” 15-1/4” 51-3/4” 15-1/4” 52-3/4” 15-1/4”

13-1/4” 13-1/4” 13-1/4”

Notes: In the model number, “N” indicates Natural gas; replace “N” with “L” to indicate L.P. gas models. * Optional Side Tappings are available on these models. Add “ST” to the end of the model number (Ex: GBN04040ST)

64” 73” 74”

29” 29” 29”

Ship. Wt. 1/2” 3/4” 3” vent/6” air 178 1/2” 3/4” 3” vent/6” air 200 1/2” 3/4” 3” vent/6” air 215

Certified for Potable Water and Space Heating Applications This water heater is suitable for water heating and space heating. Toxic chemicals, such as those used for boiler water treatment shall NEVER be introduced into this system. This water heater may NEVER be connected to any existing heating system or components previously used with non-potable water heating appliances.

Lochinvar, LLC 300 Maddox Simpson Parkway Lebanon, Tennessee 37090 P: 615.889.8900 / F: 615.547.1000

www.Lochinvar.com

RBF-07 (Replaces RBF-06 -10/14)

PDP-5M-12/14–Printed in U.S.A.

Suggest Documents