Pressure transmitters www.ifm.com/us
Electronic pressure transmitter with gauge display Rotatable display with numeric indication
fluid sensors and diagnostic systems position sensors and object recognition
bus, identification and control systems
ifm efector – close to you! s
For sanitary applications and viscous media
PG Series Pressure Transmitter with Gauge and Numeric Displays
PG Pressure Transmitter for Sanitary Applications ifm introduces a new line of pressure transmitters that combine the best features of a gauge, a switch and a transmitter. The PG Series pressure transmitter is mounted in-line to provide quick, highly visible indication of sanitary process conditions found in the food processing, dairy, beverage, and waste water industries. The flush mount, stainless steel design offers high precision (0.2%) indication of pressure values. Long-term stability and excellent overload protection is achieved through the transmitter’s ceramic cell sensing technology.
Food processing
Dairy and beverage industries Highly visible, easy to use The PG Series transmitter offers the benefits of a highly visible gauge with the functionality of a pressure sensor. The transmitter’s pushbuttons establish application parameters, NO and NC functions, and setpoint and resetpoint.
Highly visible LED Ring A ring of LEDs can be programmed to indicate the position of the setpoint and resetpoint or to follow the position of the pointer (trend display).
4-digit LED display Alphanumeric display indicates the current pressure value which can be programmed to display different units (bar and psi). Optical touch-screen pushbuttons offer menu-guided parameter setup.
Additional functions include adjustable damping and an electronic lock function that prevents unauthorized changes. When power is off, the gauge pointer disappears behind the numeric display.
High-precision measurement of sanitary process conditions Aseptoflex Vario adapter with different sealing systems (PEEK, and Viton)
ifm’s PG Series pressure family offers a 3-in-1 solution for sanitary pressure applications.
LED ring indicates setpoint and resetpoint and trend display
The PG is a transmitter, switch and gauge in a light-weight, stainless steel housing.
Analog display with scaling in bar and psi
Rotatable display 350° for mounting flexibility
Actual size
Sanitary design and high protection rating (IP 69K)
Does not require damping liquid Extended display range
If there is no power, the pointer disappears behind the numeric display
ifm’s Aseptoflex adapters feature PEEK and Viton sealing for pharmaceutical and food and beverage applications. PEEK and Viton offer long-term sealing and are resistant to swelling and aggressive chemicals.
Application parameters are setup via optical touch-screen pushbuttons Digital display – bright LED display (no LCDs)
Ceramic cell sensing technology insures reliable pressure detection 3-in-1 Unit Transmitter and switch with the advantages of a gauge display.
Ceramic cell sensing technology eliminates the need for diaphragms The sensor’s ceramic measuring cell is made of high purity aluminum oxide (AI2O3). The ceramic cell element resembles a plate capacitor with a reference electrode and measuring electrode placed 10 µm apart.
Gauge display Indicates the current operating pressure relative to the overall range of the unit. Pointer offers smooth indication of process condition Quick reference pointer does not require damping liquid and is driven by an integrated stepper motor that eliminates the typical shaking that occurs with mechanical pointers.
The capacitance is inversely proportional to the distance between the electrodes. If the distance changes by a small value because of an increase in pressure applied to the cell, the capacitance changes proportionately. The signal is then evaluated by a microprocessor. The sensor can be placed in direct contact with media, insuring reliable pressure detection in sanitary applications.
Simple pushbutton setup Two optical pushbuttons establish application parameters, setpoint and resetpoint. Touch-screen surface eliminates pushbutton cavities and prevents liquid ingress.
Base Reference electrodes Measuring electrodes Diaphragm
4-digit LED display Numeric display indicates system pressure and set-up menu items such as analog scaling, display units, switch point.
Designed and tested for sanitary applications Temperature drift test Food and beverage processing applications expose transmitters to a wide temperature range. PG pressure transmitters are designed to experience minimal signal drift over a wide temperature range.
Rotatable display Entire display rotates 350° for optimal visibility. Ergonomic indentations on face aid in turning display.
Drift [%/10K]
0.20 0.15 0.10 0.05 0
85 ºC
5 ºC
-25 ºC
Temperature
Reliable with high precision Long-term stability, excellent overload protection and high resistance to shock and vibration.
30 sec cycles 4 GPM water 140 °F 1500 psi 4"
90˚ 60˚ 30˚
0˚
Zero-leak design test The IP69K standard test duplicates the plant floor pressure cleaning conditions. The transmitter is exposed to a 1500 psi spray of water at 176˚F for 30 seconds. The test is performed at specified angles using a spray nozzle located 4” from the switch.
Product selection Liquids and gases Type of pressure: relative pressure
Application Electrical design Connection
DC 3-wire
Process connection
G 1 BSPP Aseptoflex Vario
Measuring range
Extended display range
P overload max.
Analog start point
Analog end point
Switch point SP1
-14.4…363 psi -1…25 bar -14.4...145 psi -1…10 bar -14.5...58 psi -1…4 bar -1.8...36 psi -0.12…2.5 bar -0.7...14.5 psi -0.05…1 bar -0.2...3.6 psi -10…250 mbar -14.5...14.5 psi -1…1 bar -0.07...1.45 psi -5….100 mbar
580 psi 40 bar 232 psi 16 bar 93 psi 6.4 bar 58 psi 4 bar 23 psi 1.6 bar 5.8 psi 400 mbar 23 psi 1.6 bar 2.3 psi 160 mbar
1450 psi 100 bar 725 psi 50 bar 435 psi 30 bar 290 psi 20 bar 145 psi 10 bar 145 psi 10 bar 145 psi 10 bar 58 psi 4 bar
-14.4…489 psi -1…33.8 bar -14.5...196 psi -1…13.5 bar -14.5...78 psi -1…5.4 bar -1.8...48.9 psi -0.12…3.37 bar -0.7...19.6 psi -0.05…1.35 bar -0.2...4.9 psi -12.4….338 mbar -14.5...16 psi -1…1.1 bar -0.07...1.96 psi -5…135 mbar
75.9…580 psi 5.2…40 bar 21.2..232 psi 1.5…16 bar 0...93 psi 0…6.4 bar 7.3...58 psi 0.5…4 bar 2.9...23 psi 0.2…1.6 bar 0.73...5.8 psi 50…400 mbar -7.3...23 psi -0.5…1.6 bar 0.3...2.3 psi 20…160 mbar
-13.8…580 psi -0.96…40 bar -14.3...232 psi -0.98…16 bar -14.3...93 psi -0.99…6.4 bar -1.7...58 psi -0.12…4 bar -0.7...23 psi -0.05…1.6 bar -0.2...5.8 psi -12…400 mbar -14.5...23 psi -0.99…1.6 bar -0.07...2.3 psi -4.8…160 mbar
Operating voltage
[V DC]
Current consumption
[mA]
Current rating
[mA]
Part no.
List price (USD)
PG2793
$475.00
PG2794
$475.00
PG2795
$475.00
PG2796
$475.00
PG2797
$475.00
PG2798
$475.00
PG2799
$475.00
PG2789
$475.00
18...32 < 70 250
Output
4…20 mA / 20…4 mA scaleable analog and PNP/NPN switching ≤ 0.2% (PG2789: ≤ 0.5%)
Switchpoint accuracy Switchpoint accuracy in extended display range
1.5%
≤ 0.1%
Repeatability Medium temperature
[°F / °C]
-13…257 °F (293 °F max 1 hr) / -25...125 °C (145 °C max. 1 h) stainless steel / 316 L, ceramics (99.9% Al2O3), PTFE
Materials (wetted parts) PG2793 - PG2799 / PG2789
Accessories
57
100
Description
Part no.
List price (USD)
1.5” Tri-clamp® adapter, includes EPDM O-ring seal
E33201
$49.00
2” Tri-clamp® adapter, includes EPDM O-ring seal
E33202
$49.00
Welding adapter, includes EPDM O-ring seal
E30122
$49.00
FKM (Viton) O-ring, optional
E30123
$6.00
PEEK O-ring, optional
E30124
$19.00
M12 connector · 4-pin micro DC
Part no.
List price (USD)
153
M12 x1
1
60,5
2
Cordsets
16,8
3
24 G1
1 = analog display 2 = 4-digit alphanumeric display 3 = programming buttons
Type
5 m PVC, without LED
EVT001
$15.50
10 m PVC, without LED
EVT002
$18.50
5 m PVC, without LED
EVT004
$15.50
10 m PVC, without LED
EVT005
$18.50
5 m grey, PVC cable
E 18109
$23.50
10 m grey, PVC cable
E 18110
$33.50
5 m grey, PVC cable
E 18112
$23.50
10 m grey, PVC cable
E 18113
$33.50
ifm product line catalogs Position sensors and object evaluation Inductive sensors Inductive safety technology Magnetic and cylinder sensors Capacitive sensors Actuator and valve sensors Photoelectric sensors Object evaluation systems
Fluid and diagnostic sensors Level sensors Flow sensors Pressure sensors Temperature sensors Diagnostic systems
Networking and controls Identification systems Control systems for mobile vehicles Evaluation systems Power supplies AS-i bus system Connection technology
ifm efector North America ifm efector USA
ifm efector Canada
ifm efector Mexico
782 Springdale Drive Exton, PA 19341 800-441-8246 www.ifm.com/us
700 Dorval Drive, Suite 503 Oakville, Ontario L6K 3V3 1-800-441-8246 www.ifm.com/ca
Anillo Periferico 1816-1 Col. Hacienda San Jeronimo Monterrey, N.L. 64630 01-800-813-4363 www.ifm.com/mx
ifm supports the development of responsible forest management worldwide. The FSC Mixed Sources Label means that the wood comes from FSC certified well managed forests, company controlled sources and/or recycled material.