Electromechanical Power Products
Track Circuit Uninterruptible Power Supply G1 - G2
CXP-3
Signal / Track Transformers G13 - G16 ST-400 Series
GA
Adjustable Transformer Signal Rectifiers G3 - G10 HT Series
Fixed Voltage Transformers G17 - G20 SLT Series
© Copyright 2016 s Industry Inc.
Track Transformer G11 - G12
Battery Chargers G21 - G24
ST-200-1
SJ Series
SIE-RA-CMP-001-16-EN
SIE-RA-CMP-001-16-EN
© Copyright 2016 s Industry Inc.
GB
CXP-3 Track Circuit Uninterruptible Power Supply
CXP-3 Track Circuit Uninterruptible Power Supply
4000-44350-006X
Layout
(1) 15 A Battery Fuse
(1) 1.5 A Line Fuse
115 VAC Input (4) Outputs 12 VDC Input
SIEMENS Track Circuit Uninterruptible Power Supply (CXP-3) offers a track feed transformer, a power transfer relay and a standby inverter all in a single compact housing. When used as part of a Type C track circuit, the CXP-3 acts as a track feed transformer and is operated utilizing 115 VAC input power. When unforseen AC power interruptions occur, the CXP-3 converts standby battery power to output voltage matching the same RMS value as the output would see under normal operating conditions. The standby inverter is activated through the internal power transfer relay, which is triggered AC power is lost and operates at high efficiency (88% at half power) to maximize run time on battery life.
● Meets or exceeds applicable AREMA® specifications on recommended practices regarding 3000 VAC breakdown voltage. ● Easily mountable on standard relay racks, instrument house backboards or can even be shelf mounted when removing included mounting bracket ● Weight is approx. 15 lbs. (6.80 kgs.) including connectors ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● 6.3 VAC 3.5 Amp power supply ● (1) 15 Amp battery fuse ● (1) 1.5 Amp line fuse ● (4) Output battery connections ● 115 VAC Input connection ● 12 VDC Input connection
The operating frequency is maintained to within 1 Hz of nominal power consumption under any normal voltage, load or temperature condition. Surge protection for solid state circuitry consists of (7) separate stages, including metal oxide varistors (MOV’s), transorbs, zeners, inductors and capacitors. All electronic components are isolated from chassis and outputs are isolated from the operating battery.
G1
© Copyright 2016 s Industry Inc.
SIE-RA-CMP-001-16-EN
CXP-3 Track Circuit Uninterruptible Power Supply Dimensions (Applicable for all CXP-3 Series Track Circuit Uninterruptible Power Supplies) 10.25” (26.0 cm) Overall 9” (22.9 cm) Frame
8.8” 8” (20.3 cm) (22.4 cm) Typ. Frame
2.5” (6.35 cm) Mounting Typ. 5” (12.7 cm) Overall
SIE-RA-CMP-001-16-EN
9.4” (23.9 cm) Overall
1 1/4” (3.18 cm)
© Copyright 2016 s Industry Inc.
G2
HT Series Adjustable Transformer Signal Rectifiers
HT Series Adjustable Transformer Signal Rectifiers Layout (3) AC Inputs
DC Output
Fine tuning thumbscrew Transformer core clamping locknut Replaceable selenium rectifier stacks
SIEMENS Adjustable Transformer Signal Rectifier (HT Series) model 1222X shown for reference purposes only! Actual unit selected may vary in mounting and features. SIEMENS Adjustable Transformer Signal Rectifier (HT Series) offers continuous service in charging wayside standby battery systems by delivering varying DC output in proportion to the load demands and state of battery charge, input voltage and condition. The current output varies to compensate for a charging load. Supplied with (2) replaceable, quick mounting selenium rectifier stacks, which are installed on AREMA® binding posts. This provides a secure electrical connection with no soldering nor enclosure being required. The upper stack binding posts are connected to transformer secondary terminals for convenient maintenance of the selenium rectifier stacks without needing to remove the entire assembly.
G3
© Copyright 2016 s Industry Inc.
SIE-RA-CMP-001-16-EN
HT Series Adjustable Transformer Signal Rectifiers Serviceable Battery Cells Type and Quantity s Part Number
Output Voltage
Output Current
Rectifier Stack Number
Lead (Pb)
Nickle Iron (NiFe) / Nickle Cadmium (NiCad)
4000-44000-1222X
0.8 to 3.0 VDC
2.2 A
H102
1 to 2
1 to 2
G5
4000-44000-1244X
0.8 to 3.0 VDC
4.4 A
H103
1 to 2
1 to 2
G5
4000-44000-1322X
3.0 to 7.0 VDC
2.2 A
H203
2 to 3
3 to 4
G5
4000-44000-1344X
3.0 to 7.0 VDC
4.4 A
H204
2 to 3
3 to 4
G5
4000-44000-1505X
7.0 to 13.5 VDC
0.5 A
H304
4 to 6
5 to 9
G6
4000-44000-1517X
7.0 to 13.5 VDC
1.7 A
H306
4 to 6
5 to 9
G6
4000-44000-1527X
7.0 to 13.5 VDC
2.7 A
H306
4 to 6
5 to 9
G6
4000-44000-1533X
7.0 to 13.5 VDC
3.3 A
H306
4 to 6
5 to 9
G6
4000-44000-1548X
7.0 to 13.5 VDC
4.8 A
H314
4 to 6
5 to 9
G7
4000-44000-1630X
13.0 to 15.5 VDC
3.0 A
H306
6 to 7
9 to 10
G7
4000-44000-1635X
15.0 to 20.0 VDC
3.5 A
H407
4 to 6
5 to 9
G7
4000-44000-1713X
22.0 to 31.0 VDC
1.3 A
H502
11 to 14
14 to 20
G7
4000-44000-1727X
21.0 to 27.0 VDC
2.7 A
H503
10 to 12
13 to 18
G8
SIE-RA-CMP-001-16-EN
© Copyright 2016 s Industry Inc.
Page
G4
HT Series Adjustable Transformer Signal Rectifiers
G5
4000-44000-1222X
4000-44000-1244X
● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 10.0 lbs. (4.54 kgs.) including rectifier stacks ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● (3) AC Inputs ● 115 / 230 VAC, 50 / 60 Hz Input voltage ● (1) DC Output ● 0.8 to 3.0 VDC Output voltage ● 2.2 A Output amperage ● Capable of servicing 1 lead (Pb) or 1 to 2 nickle iron (NiFe) / nickle cadmium (NiCad) battery cells ● (2) H102 replaceable selenium rectifier stacks
● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 12.0 lbs. (5.44 kgs.) including rectifier stacks ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● (3) AC Inputs ● 115 / 230 VAC, 50 / 60 Hz Input voltage ● (1) DC Output ● 0.8 to 3.0 VDC Output voltage ● 4.4 A Output amperage ● Capable of servicing 1 lead (Pb) or 1 to 2 nickle iron (NiFe) / nickle cadmium (NiCad) battery cells ● (2) H103 replaceable selenium rectifier stacks
4000-44000-1322X
4000-44000-1344X
● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 14.0 lbs. (6.35 kgs.) including rectifier stacks ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● (3) AC Inputs ● 115 / 230 VAC, 50 / 60 Hz Input voltage ● (1) DC Output ● 3.0 to 7.0 VDC Output voltage ● 2.2 A Output amperage ● Capable of servicing 2 to 3 lead (Pb) or 3 to 4 nickle iron (NiFe) / nickle cadmium (NiCad) battery cells ● (2) H203 replaceable selenium rectifier stacks
● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 16.0 lbs. (7.26 kgs.) including rectifier stacks ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● (3) AC Inputs ● 115 / 230 VAC, 50 / 60 Hz Input voltage ● (1) DC Output ● 3.0 to 7.0 VDC Output voltage ● 4.4 A Output amperage ● Capable of servicing 2 to 3 lead (Pb) or 3 to 4 nickle iron (NiFe) / nickle cadmium (NiCad) battery cells ● (2) H204 replaceable selenium rectifier stacks
© Copyright 2016 s Industry Inc.
SIE-RA-CMP-001-16-EN
HT Series Adjustable Transformer Signal Rectifiers 4000-44000-1505X
4000-44000-1517X
● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 9.0 lbs. (4.08 kgs.) including rectifier stacks ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● (3) AC Inputs ● 115 / 230 VAC, 50 / 60 Hz Input voltage ● (1) DC Output ● 7.0 to 13.5 VDC Output voltage ● 0.5 A Output amperage ● Capable of servicing 4 to 6 lead (Pb) or 5 to 9 nickle iron (NiFe) / nickle cadmium (NiCad) battery cells ● (2) H302 replaceable selenium rectifier stacks
● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 14.0 lbs. (6.35 kgs.) including rectifier stacks ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● (3) AC Inputs ● 115 / 230 VAC, 50 / 60 Hz Input voltage ● (1) DC Output ● 7.0 to 13.5 VDC Output voltage ● 1.7 A Output amperage ● Capable of servicing 4 to 6 lead (Pb) or 5 to 9 nickle iron (NiFe) / nickle cadmium (NiCad) battery cells ● (2) H304 replaceable selenium rectifier stacks
4000-44000-1527X
4000-44000-1533X
● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 16.0 lbs. (7.26 kgs.) including rectifier stacks ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● (3) AC Inputs ● 115 / 230 VAC, 50 / 60 Hz Input voltage ● (1) DC Output ● 7.0 to 13.5 VDC Output voltage ● 2.7 A Output amperage ● Capable of servicing 4 to 6 lead (Pb) or 5 to 9 nickle iron (NiFe) / nickle cadmium (NiCad) battery cells ● (2) H306 replaceable selenium rectifier stacks
● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 19.0 lbs. (8.62 kgs.) including rectifier stacks ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● (3) AC Inputs ● 115 / 230 VAC, 50 / 60 Hz Input voltage ● (1) DC Output ● 7.0 to 13.5 VDC Output voltage ● 3.3 A Output amperage ● Capable of servicing 4 to 6 lead (Pb) or 5 to 9 nickle iron (NiFe) / nickle cadmium (NiCad) battery cells ● (2) H306 replaceable selenium rectifier stacks
SIE-RA-CMP-001-16-EN
© Copyright 2016 s Industry Inc.
G6
HT Series Adjustable Transformer Signal Rectifiers
G7
4000-44000-1548X
4000-44000-1630X
● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 20.0 lbs. (9.07 kgs.) including rectifier stacks ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● (3) AC Inputs ● 115 / 230 VAC, 50 / 60 Hz Input voltage ● (1) DC Output ● 7.0 to 13.5 VDC Output voltage ● 4.8 A Output amperage ● Capable of servicing 4 to 6 lead (Pb) or 5 to 9 nickle iron (NiFe) / nickle cadmium (NiCad) battery cells ● (2) H314 replaceable selenium rectifier stacks
● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 19.0 lbs. (8.62 kgs.) including rectifier stacks ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● (3) AC Inputs ● 115 / 230 VAC, 50 / 60 Hz Input voltage ● (1) DC Output ● 13.0 to 15.5 VDC Output voltage ● 3.0 A Output amperage ● Capable of servicing 6 to 7 lead (Pb) or 9 to 10 nickle iron (NiFe) / nickle cadmium (NiCad) battery cells ● (2) H306 replaceable selenium rectifier stacks
4000-44000-1635X
4000-44000-1713X
● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 20.0 lbs. (9.07 kgs.) including rectifier stacks ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● (3) AC Inputs ● 115 / 230 VAC, 50 / 60 Hz Input voltage ● (1) DC Output ● 15.0 to 20.0 VDC Output voltage ● 3.5 A Output amperage ● Capable of servicing 4 to 6 lead (Pb) or 5 to 9 nickle iron (NiFe) / nickle cadmium (NiCad) battery cells ● (2) H407 replaceable selenium rectifier stacks
● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 19.0 lbs. (8.62 kgs.) including rectifier stacks ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● (3) AC Inputs ● 115 / 230 VAC, 50 / 60 Hz Input voltage ● (1) DC Output ● 22.0 to 31.0 VDC Output voltage ● 1.3 A Output amperage ● Capable of servicing 11 to 14 lead (Pb) or 14 to 20 nickle iron (NiFe) / nickle cadmium (NiCad) battery cells ● (2) H502 replaceable selenium rectifier stacks
© Copyright 2016 s Industry Inc.
SIE-RA-CMP-001-16-EN
HT Series Adjustable Transformer Signal Rectifiers 4000-44000-1727X
Replacement Selenium Rectifier Stacks Part Number
● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 20.0 lbs. (9.07 kgs.) including rectifier stacks ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● (3) AC Inputs ● 115 / 230 VAC, 50 / 60 Hz Input voltage ● (1) DC Output ● 21.0 to 27.0 VDC Output voltage ● 2.7 A Output amperage ● Capable of servicing 10 to 12 lead (Pb) or 13 to 18 nickle iron (NiFe) / nickle cadmium (NiCad) battery cells ● (2) H503 replaceable selenium rectifier stacks
SIE-RA-CMP-001-16-EN
Description
014652-X
For HT rectifier 014000-1222X
014652-1X
For HT rectifier 014000-1244X
014652-2X
For HT rectifier 014000-1322X
014652-3X
For HT rectifier 014000-1344X
014652-4X
For HT rectifier 014000-1505X
014652-5X
For HT rectifier 014000-1517X
014652-6X
For HT rectifiers 014000-1527X, 014000-1533X and 014000-1630X
014652-7X
For HT rectifier 014000-1548X
014652-8X
For HT rectifier 014000-1635X
014652-9X
For HT rectifier 014000-1713X
014652-10X
For HT rectifier 014000-1727X
© Copyright 2016 s Industry Inc.
G8
HT Series Adjustable Transformer Signal Rectifiers Dimensions 5 5/8” (14.29 cm) Overall
6 3/8” (16.19 cm) Overall
4 3/4” (12.07 cm) Center to Center AC1
AC2
AC3
DC
Ø 0.281” (0.71 cm) Mounting SIGNAL
RECTIFIER
CAT. NO.
A.C. VOLTS 115/230 50/60 Hz
D.C. AMPS. D.C. VOLTS CONT. SERV.
10
5
SAFETRAN SYSTEMS CORP.
0
TRANS. SEC. MAX. NO. LOAD
VOLTS
A.C.
(UP) SELENIUM RECTIFIER
STACK No.
(UP) SELENIUM RECTIFIER
STACK No.
SAFETRAN SYSTEMS CORPORATION
SAFETRAN SYSTEMS CORPORATION
DOWN FRONT
DOWN FRONT
8” (20.32 cm) Overall
H102
G9
© Copyright 2016 s Industry Inc.
SIE-RA-CMP-001-16-EN
AC1
AC2
AC3
DC
SIGNAL
RECTIFIER
CAT. NO.
A.C. VOLTS 115/230 50/60 Hz
D.C. AMPS. D.C. VOLTS CONT. SERV.
10
5
SAFETRAN SYSTEMS CORP.
0
TRANS. SEC. MAX. NO. LOAD
VOLTS
A.C.
(UP)
(UP)
SELENIUM RECTIFIER
SELENIUM RECTIFIER
STACK No.
STACK No.
SAFETRAN SYSTEMS CORPORATION
SAFETRAN SYSTEMS CORPORATION
DOWN FRONT
DOWN FRONT H102
SIE-RA-CMP-001-16-EN
© Copyright 2016 s Industry Inc.
G10
ST-200-1 Track Transformers
ST-200-1 Track Transformer
4000-44562-001X
Layout
Track Battery Connection
SE-3 Battery Connection
SIEMENS ST-200-1 Track Transformer model 4000-44562-001X shown for reference purposes only! Actual unit selected may vary in mounting and features. SIEMENS ST-200-1 Track Transformer is a 200 VA, 60 Hz to 250 Hz transformer, developed for use with Siemens SE-3 Track Circuits. It may also be used as a general purpose step up, or step down transformer for many applications. It has a two terminal track winding which will accept or deliver up to 12 volts (16 amps). The two terminal receiver winding is isolated from the former, and will accept or deliver up to 120 volts (1.6 amps).
● Meets or exceeds applicable AREMA® specifications on recommended practices regarding 3000 VAC breakdown voltage. ● Easily mountable on standard relay racks, instrument house backboards or can even be shelf mounted when removing included mounting bracket ● Weight is approx. 15 lbs. (6.80 kgs.) including connectors ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● 6.3 VAC 3.5 Amp power supply ● (1) 15 Amp battery fuse ● (1) 1.5 Amp line fuse ● (4) Output battery connections ● 115 VAC Input connection ● 12 VDC Input connection
The ST-200-1 is mounted in an aluminum extruded housing, which provides excellent heat transfer from the windings, and also allows flexibility in mounting. Tab brackets located in slots in the extrusion, allow mounting directly to a relay rack, where the transformer mounts in the same space as an ST-2 relay frame footprint. Tab brackets can be easily relocated for backboard or shelf mounting as well. Terminals are the standard AREMA® post type, rather than the commercial spade type.
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by respective holders.
G11
© Copyright 2016 s Industry Inc.
SIE-RA-CMP-001-16-EN
ST-200-1 Track Transformers Dimensions 10.25” (26.0 cm) Overall
See note 2 for mounting hole pattern
7.25” (18.4 cm) Frame
5” (12.7 cm) Overall
SIE-RA-CMP-001-16-EN
9” (22.9 cm) Frame
9.4” (23.9 cm) Overall
NOTES: 1. Generic depiction of ST-200 Series frame dimensions for representation purposes only! 2. Staggered mounting bracket hole patter is 3” (7.6 cm) on center and matches relay bar mounting hole configuration for ST series relay center to center dimensions.
© Copyright 2016 s Industry Inc.
G12
ST-400 Series Track Transformers
ST-400 Series Signal / Track Transformers Layout
Multi Tapped Isolated Primary Multi Tapped Isolated Secondary
Chassis Ground Terminal
SIEMENS ST-400 Signal / Track Transformer model 4000-44560-021X shown for reference purposes only! Actual unit selected may vary in mounting and features. SIEMENS ST-400 Signal / Track Transformer is a 400 VA, 60 Hz to 200 Hz transformer, developed for use with SIEMENS SE-3 Track Circuits. It may also be used as a general purpose step up, or step down transformer for many applications. It has a two terminal track winding which will accept or deliver up to 12 volts (16 amps). The two terminal receiver winding is isolated from the former, and will accept or deliver up to 120 volts (1.6 amps). The ST-400 is mounted in an aluminum extruded housing, which provides excellent heat transfer from the windings, and also allows flexibility in mounting. Tab brackets located in slots in the extrusion, allow mounting directly to a relay rack, where the transformer mounts in the same space as an ST-2 relay frame footprint. Tab brackets can be easily relocated for backboard or shelf mounting as well. Terminals are the standard AREMA® post type, rather than the commercial spade type.
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by respective holders.
G13
© Copyright 2016 s Industry Inc.
SIE-RA-CMP-001-16-EN
ST-400 Series Track Transformers 010560-X (ST-400 Signal Transformer)
4000-44560-021X (ST-400-1 Track Transformer)
● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 27.0 lbs. (12.25 kgs.) including hardware ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● 396 VA maximum ● 50 / 200 Hz ● (2) 120 VAC, 1.65 Amp maximum primaries ● (2) 18 VAC, 11.0 Amp maximum secondaries ● 5% zero to full rated load regulation ● Chassis ground terminal
● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 20.0 lbs. (9.07 kgs.) including hardware ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● 400 VA maximum ● 60 / 200 Hz ● (1) 120 VAC, 3.3 Amp maximum primary ● (1) 18 VAC, 22.0 Amp maximum secondary ● 5% zero to full rated load regulation ● Chassis ground terminal
010560-X-2 (ST-400-2 Track Transformer)
● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 20.0 lbs. (9.07 kgs.) including hardware ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● 400 VA maximum ● 60 / 200 Hz ● (1) 120 VAC, 3.3 Amp maximum primary ● (1) 18 VAC, 22.0 Amp maximum secondary ● 5% zero to full rated load regulation
SIE-RA-CMP-001-16-EN
© Copyright 2016 s Industry Inc.
G14
ST-400 Series Track Transformers Dimensions (Applicable for all ST-400 Series Transformers) 10.25” (26.0 cm) Overall See note 2 for mounting hole pattern
7.25” (18.4 cm) Frame
5” (12.7 cm) Overall
G15
9” (22.9 cm) Frame
9.4” (23.9 cm) Overall
NOTES: 1. Generic depiction of ST-400 Series frame dimensions for representation purposes only! 2. Staggered mounting bracket hole patter is 3” (7.6 cm) on center and matches relay bar mounting hole configuration for ST series relay center to center dimensions.
© Copyright 2016 s Industry Inc.
SIE-RA-CMP-001-16-EN
SIE-RA-CMP-001-16-EN
© Copyright 2016 s Industry Inc.
G16
SLT Series Fixed Lighting Transformers
SLT Series Fixed Lighting Transformers Layout
SIEMENS Fixed Lighting Transformer (SLT Series) model 4000-44520-020X shown for reference purposes only! Actual unit selected may vary in mounting and features. SIEMENS Fixed Lighting Transformers (SLT Series) are available in two models of 20 and 50 amperes. Secondary voltage taps are provided for 1 to 15.5 VAC. Excellent voltage regulation is assured through use of heavy cores and windings. These transformers may be shelf, backboard, or relay rack mounted. Terminals are the standard AREMA® post type, rather than the commercial spade type.
G17
© Copyright 2016 s Industry Inc.
SIE-RA-CMP-001-16-EN
SLT Series Fixed Lighting Transformers 4000-44520-020X
4000-44520-050X
● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 27.0 lbs. (12.25 kgs.) including hardware ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● 115 / 230 VAC primary volts ● 11 - 15.5 VAC secondary volts ● 20 Amps output maximum
● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 27.0 lbs. (12.25 kgs.) including hardware ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● 115 / 230 VAC primary volts ● 11 - 15.5 VAC secondary volts ● 50 Amps output maximum
SIE-RA-CMP-001-16-EN
© Copyright 2016 s Industry Inc.
G18
SLT Series Fixed Lighting Transformers Dimensions
8.5” (21.59 cm) Overall
7.5” (19.05 cm) Overall
7.5” (19.05 cm) Center to Center
6.0” (15.24 cm) 7.13” Center to (18.11 cm) Center Overall
G19
© Copyright 2016 s Industry Inc.
SIE-RA-CMP-001-16-EN
Lighting Transformers 4000-44599-101X
4000-44599-103X
● Weight is approx. 4.0 lbs. (1.81 kgs.) including hardware ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● 115 VAC primary, 10.0 V - 13.5 V, 5 A
● Weight is approx. 4.0 lbs. (1.81 kgs.) including hardware ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● 230 VAC primary, 10.0 V - 13.0 V, 5 A
4000-44599-106X
4000-44599-110X
● Weight is approx. 4.0 lbs. (1.81 kgs.) including hardware ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● 115 VAC primary, 0.2 V - 13.5 V, 5 A
● Weight is approx. 4.0 lbs. (1.81 kgs.) including hardware ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● 115 VAC primary, 4.0 V - 24 V, 50 VA
SIE-RA-CMP-001-16-EN
© Copyright 2016 s Industry Inc.
G20
SJ Series Battery Chargers
SJ Series Battery Chargers ● (2) Battery selection modes Lead Acid or Nickle Cadmium (NiCad)
Layout Line Voltage AC Input Switch Fuses
DC Output Breaker
Battery Connectors Features
AC Input Connectors
● (2) Operation modes Constant Current or Constant Voltage ● Float voltage can be adjusted with the battery connected. (When in Constant Voltage mode)
Ground Lug Voltage Display Pushbutton
Cell Quantity Selection
● Pushbutton to display voltage on demand
LED Indicators
● LED indicators and digital display
Temperature Probe Connector
Float Voltage Adjustment
● Supplied with transient suppression devices across the input and output terminals
LED Digital Display
SIEMENS Battery Charger (SJ Series) model Z927-04863-0040 shown for reference purposes only! Actual unit selected may vary in mounting and features.
Ease of Maintenance
G21
SIEMENS Battery Charger (SJ Series) offers long term, reliable charge maintenance of lead acid and nickle cadmium (NiCad) batteries and are ideally suited where remote installation, extreme temperatures and minimal maintainer involvement is expected.
© Copyright 2016 s Industry Inc.
SIE-RA-CMP-001-16-EN
SJ Series Battery Chargers Z927-04861-0000
Z927-04863-0030
SJ-20 Battery Charger ● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 27.0 lbs. (12.25 kgs.) including hardware ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● Input current: 8.2 Amps @ 115 VAC, 50/60 Hz 4.1 Amps @ 230 VAC, 50/60 Hz ● Output current: 20 Amps ● Output voltage: 10.0 - 18.8 VDC (Lead Acid) 6.5 - 19.0 VDC (NiCad) ● Cell selection range: 5 - 8 cells (Lead Acid) 5 - 12 cells (NiCad) ● Current limit: 21.5 (± 5%)
SJ-30 Battery Charger ● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 60 lbs. (27.22 kgs.) including hardware ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● Input current: 24.6 Amps @ 115 VAC, 50/60 Hz 12.3 Amps @ 230 VAC, 50/60 Hz ● Output current: 30 Amps ● Output voltage: 22.0 - 42.4 VDC (Lead Acid) 24.7 - 41.0 VDC (NiCad) ● Cell selection range: 11 - 18 cells (Lead Acid) 19 - 26 cells (NiCad) ● Current limit: 32.0 (± 5%)
Z927-04863-0040
SJ-40 Battery Charger ● Meets or exceeds applicable AREMA® specifications ● Weight is approx. 45.0 lbs. (20.41 kgs.) including hardware ● Operates in -40º F to +160º F (-40ºC to +70ºC) @ up to 95% Non-Condensing Relative Humidity ● Input current: 16.4 Amps @ 115 VAC, 50/60 Hz 8.2 Amps @ 230 VAC, 50/60 Hz ● Output current: 40 Amps ● Output voltage: 10 - 18.9 VDC (Lead Acid) 6.5 - 19.0 VDC (NiCad) ● Cell selection range: 5 - 8 cells (Lead Acid) 5 - 12 cells (NiCad) ● Current limit: 43.0 (± 5%)
SIE-RA-CMP-001-16-EN
© Copyright 2016 s Industry Inc.
G22
SJ Series Battery Chargers Dimensions (Applicable for all SJ Series Battery Chargers) 10.0” (25.4 cm) Overall
10.8” (27.43 cm) Overall
9.4” (23.88 cm) Overall
Optional Accessories Description
Part Number 052619-1
Lagdown brace
Temperature Probes Part Number
G23
Description
3250775319
Temperature probe with 12’ (3.66 m) cable
3250775328
Temperature probe with 15’ (4.57 m) cable
© Copyright 2016 s Industry Inc.
SIE-RA-CMP-001-16-EN
SIE-RA-CMP-001-16-EN
© Copyright 2016 s Industry Inc.
G24
