ACTUATORS
ELECTRIC CYLINDERS SERIES ELEKTRO
1
ACTUATORS
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
An electric cylinder with a connection interface in accordance with in-line version ISO 15552. The piston rod extension is controlled by a system with a hardened screw and recirculating ball screw nut. The piston has a guide strip calibrated to reduce to a minimum play with the barrel and hence vibration during ball screw rotation. The cylinder can be equipped with a built-in non-rotating system featuring two opposing slides that run in separate longitudinal slots in the barrel. The piston comes with magnets and the barrel has longitudinal slots for housing sensors. The piston rod has increased outside diameter and thickness to make it extra rigid and more resistant to radial and peak geared version loads. A system for greasing the screws is included. Numerous standard accessories for pneumatic cylinders, can be used for mounting the cylinder. Accessories made of aluminium, or made of steel for heavy-duty operations, can be used. The motor can be selected from an optimised range, which encompasses both STEPPING and BRUSHLESS motors. There is a version with a brake mounted on the motor. Stepper motors are also available with a brake and encoder (all BRUSHLESS motors come with an encoder). It is important to remember that the brake is static type, so the motor must be stopped before the brake is engaged. There is a version for in-line assembly, where the drive shaft is jointed directly onto the screw. There is also a geared motor version, where transmission is provided by pulleys and a cog belt with a transmission ratio of 1:1. A planetary gear box, in the case of a Ø 100 in-line cylinder, and pulleys with a non-unitary gear ratio, in the case of a Ø 80 and Ø 100 cylinder, can be used to increase the torque. Suitable motor drives are provided. Special adaptor flanges and joints can be provided if the customer wishes to use a particular brand of motor. NB: A piston rod anti-rotation system must be used. If the piston rod is not fixed firmly to an element, a flange or to any other device preventing it from rotating, a cylinder in the anti-rotation version must be used.
TECHNICAL DATA Piston rod thread Environmental temperature range for STEPPING motors BRUSHLESS motors Electrical protection rating with STEPPING motors BRUSHLESS motors Maximum relative humidity of the air for IP55 STEPPING motor IP65 BRUSHLESS motor Minimum stroke for version with non-rotating Minimum stroke for version without non-rotating Maximum stroke Positioning repeatability Positioning accuracy Overall radial oscillation of the piston rod (without load) for 100 mm of stroke Versions
Uncontrolled impact at the end of stroke Sensor magnet Maximum angle of twist of the piston rod for non-rotating version Work position
°C °C
mm mm mm mm mm
Ø 32
Ø 50
M10x1.25
M16x1.5
Ø 63 - 63 HD
** indicative average data that gets influenced by various factors such as the stroke, the type of motor, the cylinder version, etc ...
2
Ø 80
Ø 100
M16x1.5 M20x1.5 from -10 to +50 from 0 to +40 IP40 or IP55 (see key to codes on page 30) IP40 or IP65 (see key to codes on page 30) 90% with 40°C; 57% with 50°C (no condensate) 90% (no condensate) Twice the screw pitch (to guarantee ball lubrication) 80 (in order to re-grease the screw) 125 (in order to re-grease the screw) 1370 1500 ± 0.02 ± 0.2 ** 0.4 With or without piston rod non-rotating With or without piston rod non-rotating; in line or geared motor; wth or without planetary gear box NOT ALLOWED (it provides an extra-stroke minimum 5 mm) YES 1°30’ 1° 0°45’ 0°35’ 0°30’ Any
MECHANICAL FEATURES
Maximum number of revs Maximum speed (Vmax)
Ø 50
Ø 63
Ø 63 HD
Ø 80
Ø 100
mm 4 12 5 10 16 5 10 20 5 10 5 10 32 10 40 mm 12 12 16 16 16 20 20 20 20 20 32 32 32 50 40 N 3300 4300 7500 12800 27150 36080 N 5200 5600 10500 6670 4330 10010 12800 4880 17600 18980 30000 43000 26000 73000 43000 Calculate mean axial load and the calculate life (see graphs on page 8) 1/min 4000 3000 2500 2500 2000 2200 mm/s 267 800 250 500 800 208 417 833 208 417 165 310 1100 500 1500
ACTUATORS
Screw pitch (p) Screw diameter Static axial load (Fo)* Dynamic axial load (F)
Ø 32
WEIGHTS (ONLY CYLINDER) Screw pitch (p) Weight at stroke 0 Additional weight each mm of stroke Moving mass at stroke 0 (non-rotating version) Mx Additional moving mass each mm of stroke
Ø 32 mm g g g g
Ø 50
4 12 896 973 3.98 3.96 270 353 1.25
5 1990 6.64 586
10 2043 6.62 629 1.84
Ø 63 - 63 HD 16 2086 6.55 703
5 2942 6.25 956
10 3209 6.32 1215 1.98
Ø 80
20 3056 6.32 1067
5 8658 15.6 3709
10 8629 15.3 3730 4.9
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
* N.B. Static loads bearable without damage. Useful loads are shown in the diagrams on page 10 onwards.
Ø 100 32 8650 16 3667
10 40 15049 13719 35.5 26 6630 6171 15 9.6
MASS MOMENTS OF INERTIA
Screw pitch Transmission ratio (τ) J0 at stroke 0 J1 each metre of stroke J2 each kg of load J3 in-line transmission J3 geared transmission
Screw pitch Transmission ratio (τ) J0 at stroke 0 J1 each metre of stroke J2 each kg of load J3 in-line transmission J3 geared transmission
Screw pitch Transmission ratio (τ) J0 at stroke 0 J1 each metre of stroke J2 each kg of load J3 in-line transmission J3 geared transmission
mm kgmm2 kgmm2/m kgmm2/kg kgmm2 kgmm2
Ø 32
4 1:1 1.2407 12.2592 0.4053
12 1:1 2.4309 17.8468 4.0858
0.42 53.2
mm
10 1:1 6.1360 38.5264 2.5332 2.6 126.5
10 1:1.25 420.3 608 2.5330 388.3
1:1
430 688 0.6333 74.1 1041.7
1:1
163.9 1041.7
16 1:1 9.1113 49.1936 6.4849
5 1:1 12.4043 86.2990 0.6333
Ø 63 - 63 HD 10 1:1 14.8767 96.6652 2.5332 18.1 237.7
Ø 80
1:1.25
mm kgmm2 kgmm2/m kgmm2/kg kgmm2 kgmm2
Ø 50
5 1:1
kgmm2 kgmm2/m kgmm2/kg kgmm2 kgmm2
5 1:1 5.3455 35.2305 0.6333
388.3
10 1:2 1357 3984 2.5330 1161.1
74.1 1041.7
20 (only Ø63) 1:1 23.5427 116.3671 10.1327
32 1:1.5
1:1
1:1.5 438.8 753 25.9382
1071.6
Ø 100 1:3 ●
1:1
385.9 -
163.9 1041.7
74.1 1041.7
40 1:2 1042.4 1869.3 40.5284 1161.1
1071.6
1:3 ●
385.9 -
● in line with gear box The total mass moment of inertia (Jtot) reduced for the motor is: Jtot = [J1 . corsa [m] + J2 . (Carico [kg] + Mx [kg]) + J0] . τ2 + J3 Mx is defined in the weight table.
3
ACTUATORS
CALCULATION OF MEAN AXIAL LOAD Fm AND VERIFICATION Peak axial load in a work cycle must not exceed the static axial load Fo. The peak value is usually achieved during upward acceleration in vertical installation. Exceeding this value leads to greater wear and hence shorter life of the recirculating ball screw. Mean axial load Fm
Fm = 3
SF
3
x
Fx13 x
x
VX Vm
VX1 Vm
x
x
q 100
q1 100
Fx1
=
+ Fx23 x
Fo Fx3
VX2 Vm
q V q + 2 + Fx33 x X3 x 3 + ... 100 Vm 100
Fx = Axial load at stage x Fm = Mean axial load during extension Fo = Static axial load q = Time segment Vx = Speed in the phase x Vm = Average speed
Fm
Fx2
Fx [N]
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
Fm = 3
q1
q2
q3
q [100%]
The mean axial load must not exceed the dynamic axial load: Fm ≤ F The graphs on page 8 show screw life as a function of Fm BARREL CROSS SECTION Ø 63
Ø 50
Ø 32
Ø 100 Ø 80
a Slots for sensors b Slots for anti-rotation
4
COMPONENTS
ACTUATORS
CYLINDER WITH IN-LINE MOTOR
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
CYLINDER
CYLINDER WITH GEARED MOTOR a FRONT CYLINDER HEAD: anodised aluminium b BARREL: extruded and anodised aluminium alloy c PISTON ROD: grinded chrome steel d WORM SCREW: hardened steel e BALL SCREW: steel f REAR CYLINDER HEAD: anodised aluminium g WIPER RING: polyurethane h PISTON ROD GASKET: NBR (IP55/ IP65 version only) i GUIDE BUSHING: steel strip with bronze and PTFE insert j BUFFER: technopolymer k MAGNET: plastoferrite l GUIDE STRIP: self-lubricated calibrated technopolymer m PISTON: aluminium n BEARING: oblique with two ball rings o BEARING LOCKING RING: anodised aluminium p BELL: extruded and anodised aluminium alloy q COUPLING r ADAPTOR PLATE: anodised aluminium s ELECTRIC MOTOR u 20 ELECTRIC MOTOR u 21 TRANSMISSION PLATE: anodised aluminium u 22 DRIVE BELT u 23 PULLEY: steel u 24 SHRINK DISC u 25 COVER: anodised aluminium u 26 PLANETARY GEAR BOX
CYLINDER WITH MOTOR AND GEAR BOX
PEAK LOADS With vertical installations, the following load conditions applied to the piston rod must be met. Axial load [N]
Stroke [mm]
5
ACTUATORS
CRITICAL VELOCITY
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
The two variables (stroke and linear speed) must meet the conditions in the graph below, otherwise resonance could be generated and affect the system. Ø 32
Ø 50
Speed [mm/s]
Speed [mm/s]
Stroke [mm]
Stroke [mm]
screw pitch 4
screw pitch 5
screw pitch 12
screw pitch 10
Ø 63 - Ø 63 HD
Ø 80
Speed [mm/s]
Speed [mm/s]
Stroke [mm] screw pitch 5
screw pitch 5 screw pitch 10
Ø 100 Speed [mm/s]
Stroke [mm] screw pitch 10 screw pitch 40
6
Stroke [mm]
screw pitch 10 screw pitch 20 (only Ø 63)
screw pitch 16
screw pitch 32
MAXIMUM RADIAL LOADS ON PISTON ROD
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
ACTUATORS
Radial loads can be applied to the piston rod. They must not exceed the values in the adjacent chart, otherwise the guides on the rod and piston will be subjected to excessive wear.
Radial loads [N]
Stroke [mm]
PISTON ROD SPEED DEPENDING ON THE NUMBER OF SCREW TURNS SCREW PITCH 4 5
10
12 16 20 32 40
TRANSMISSION RATIO 1:1 1:1 1:1.25 1:1 1:1.25 1:1.5 1:2 1:3 1:1 1:1 1:1 1:1 1:1.5 1:1 1:2 1:3
K (n/V) 15 12 15 6 7.5 9 12 18 5 3.75 3 1.87 2.81 1.5 3 4.5
The table shows the direct correspondence between the number of turns (1/min) and the translation speed of the stem (mm/s). In any case all the other conditions and limitations of each specific cylinder will have to be complied. Example: V = 100 mm/s pitch = 10 transmission ratio = 1:1.5 K=9 n = V x K = 900 rpm
DRIVE TORQUE AS A FUNCTION OF THE AXIAL LOAD APPLIED TO THE PISTON ROD SCREW PITCH 4 5
10
12 16 20 32 40
TRANSMISSION RATIO 1:1 1:1 1:1.25 1:1 1:1.25 1:1.5 1:2 1:3 1:1 1:1 1:1 1:1 1:1.5 1:1 1:2 1:3
h (C/F) 0.0008 0.0010 0.0008 0.0020 0.0016 0.0013 0.0010 0.0007 0.0024 0.0032 0.0040 0.0064 0.0043 0.0080 0.0040 0.0027
The friction generated in the mechanical system is taken into account. Example: F = 1000 N pitch = 10 transmission ratio = 1:1.5 h = 0.0013 C = F x h = 1.3 Nm
7
ACTUATORS
LIFE CHARACTERISTICS AS A FUNCTION OF THE MEAN AXIAL LOAD Life characteristics can vary considerably from those indicated in the graphs due to different operating conditions (radial loads, temperature, lubrication status, etc.). Ø 32 Mean axial load [N] 2200
screw pitch 4
2000
screw pitch 12
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
1800 1600 1400 1200 1000 800 600 400 200 0
0
1000 2000 3000 4000 5000 6000 7000 8000 9000 10000
Cylinder life [km]
Ø 50 Mean axial load [N] 2800
screw pitch 5 screw pitch 10
2400
screw pitch 16
2000 1600 1200 800 400 0 0
1000 2000 3000 4000 5000 6000 7000 8000 9000 10000
Cylinder life [km]
Ø 63 - Ø 63 HD Mean axial load [N] 7500
screw pitch 5
7000 6500
screw pitch 10
6000
screw pitch 20
5500
screw pitch 5 HD
5000
screw pitch 10 HD
4500 4000 3500 3000 2500 2000 1500 1000 500 0 0
1000 2000 3000 4000 5000 6000 7000 8000 9000 10000
Cylinder life [km]
8
ACTUATORS
Ø 80 Mean axial load [N] screw pitch 5 screw pitch 10
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
screw pitch 32
Cylinder life [km]
Ø 100 Mean axial load [N] screw pitch 10 screw pitch 40
Cylinder life [km]
NOTES
9
ACTUATORS
AXIAL LOAD CURVES AS A FUNCTION OF SPEED (CYLINDER COMPELTE WITH MOTOR AND DRIVE) N.B.: The obtainable load values already take the efficiency of the system into account. For STEPPING motors, with the motor off, the drive current is automatically reduced by 50% to prevent overheating. Consequently, available axial load with the motor stopped is also reduced by 50%. Ø 32 with pitch 4 screw, STEPPING motors and motor 1 STEPPING with BRAKE Axial load [N]
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
1600
37M1110000 (24VDC) 37M1110000 (48VDC) 37M1110000 (75VDC) 37M1120000 (24VDC) or 37M5120000 (with brake, 24VDC)
1400 1200 1000
37M1120000 (48VDC) or 37M5120000 (with brake, 48VDC)
800
37M1120000 (75VDC) or 37M5120000 (with brake, 75VDC)
600
37M1120001 (24VDC) 37M1120001 (48VDC) 37M1120001 (75VDC)
400 200 0 0 50 100 150 200 250 300
Speed [mm/s] Ø 32 with pitch 4 screw, STEPPING motors with BRAKE + ENCODER Axial load [N] 3500
37M3220000 (24VDC) 37M3220000 (48VDC) 37M3220000 (75VDC) 37M3230000 (24VDC) 37M3230000 (48VDC) 37M3230000 (75VDC)
3000 2500 2000 1500 1000 500 0 0 20 40 60 80 100 120
Speed [mm/s] Ø 32 with pitch 12 screw, STEPPING motors and motor 1 STEPPING with BRAKE Axial load [N] 550
37M1110000 (24VDC) 37M1110000 (48VDC) 37M1110000 (75VDC) 37M1120000 (24VDC) or 37M5120000 (with brake, 24VDC)
500 450 400 350
37M1120000 (48VDC) or 37M5120000 (with brake, 48VDC)
300 250
37M1120000 (75VDC) or 37M5120000 (with brake, 75VDC)
200 150
37M1120001 (24VDC) 37M1120001 (48VDC) 37M1120001 (75VDC)
100 50 0 0 200 400 600 800 1000
Speed [mm/s]
10
1250
37M3220000 (24VDC) 37M3220000 (48VDC) 37M3220000 (75VDC) 37M3230000 (24VDC) 37M3230000 (48VDC) 37M3230000 (75VDC)
1000
750
500
250
0 0 50 100 150 200 250 300 350
Speed [mm/s] Ø 50 with pitch 5 screw, STEPPING motors Axial load [N] 4500
37M1430000 (48VDC) 37M1430000 (75VDC) 37M1430000 (140VDC) 37M1440000 (48VDC) 37M1440000 (75VDC) 37M1440000 (140VDC)
4000 3500 3000 2500
ACTUATORS
Axial load [N]
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
Ø 32 with pitch 12 screw, STEPPING motors with BRAKE + ENCODER
2000 1500 1000 500 0 0
50 100 150 200 250
Speed [mm/s]
Ø 50 with pitch 5 screw, STEPPING motors with BRAKE + ENCODER Axial load [N] 6000
37M3430000 (24VDC) 37M3430000 (48VDC) 37M3430000 (75VDC) 37M3460000 (24VDC) 37M3460000 (48VDC) 37M3460000 (75VDC)
5000
4000
3000
2000
1000
0 0 25 50 75 100 125 150
Speed [mm/s]
11
ACTUATORS
Ø 50 with pitch 10 screw, STEPPING motors Axial load [N] 2500
37M1430000 (48VDC) 37M1430000 (75VDC) 37M1430000 (140VDC) 37M1440000 (48VDC) 37M1440000 (75VDC) 37M1440000 (140VDC)
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
2000
1500
1000
500
0 0 100 200 300 400 500
Speed [mm/s] Ø 50 with pitch 10 screw, STEPPING motors with BRAKE + ENCODER Axial load [N] 3000
37M3430000 (24VDC) 37M3430000 (48VDC) 37M3430000 (75VDC) 37M3460000 (24VDC) 37M3460000 (48VDC) 37M3460000 (75VDC)
2500
2000
1500
1000
500
0 0 50 100 150 200 250 300
Speed [mm/s]
Ø 50 with pitch 16 screw, STEPPING motors Axial load [N] 1400
37M1430000 (48VDC) 37M1430000 (75VDC) 37M1430000 (140VDC) 37M1440000 (48VDC) 37M1440000 (75VDC) 37M1440000 (140VDC)
1200 1000 800 600 400 200 0 0 100 200 300 400 500 600 700 800
Speed [mm/s]
12
1750
37M3430000 (24VDC) 37M3430000 (48VDC) 37M3430000 (75VDC) 37M3460000 (24VDC) 37M3460000 (48VDC) 37M3460000 (75VDC)
1500 1250 1000 750 500 250 0 0 50 100 150 200 250 300 350 400 450
Speed [mm/s] Ø 63 with pitch 5 screw, STEPPING motors Axial load [N] 10000
37M1450000 (48VDC) 37M1450000 (75VDC) 37M1450000 (140VDC) 37M1470000 (24VDC) 37M1470000 (48VDC) 37M1470000 (75VDC)
9000 8000 7000 6000
ACTUATORS
Axial load [N]
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
Ø 50 with pitch 16 screw, STEPPING motors with BRAKE + ENCODER
5000 4000 3000 2000 1000 0 0 25 50 75 100 125 150
Speed [mm/s]
Ø 63 with pitch 5 screw, STEPPING motors with BRAKE + ENCODER Axial load [N] 10000
37M3450000 (24VDC) 37M3450000 (48VDC) 37M3450000 (75VDC) 37M3460000 (24VDC) 37M3460000 (48VDC) 37M3460000 (75VDC) 37M3470000 (24VDC) 37M3470000 (48VDC) 37M3470000 (75VDC)
9000 8000 7000 6000 5000 4000 3000 2000 1000 0 0 25 50 75 100 125 150
Speed [mm/s]
13
ACTUATORS
Ø 63 with pitch 10 screw, STEPPING motors Axial load [N] 5000
37M1450000 (48VDC) 37M1450000 (75VDC) 37M1450000 (140VDC) 37M1470000 (24VDC) 37M1470000 (48VDC) 37M1470000 (75VDC)
4500 4000
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
3500 3000 2500 2000 1500 1000 500 0 0 50 100 150 200 250 300 350 400 450
Speed [mm/s] Ø 63 with pitch 10 screw, STEPPING motors with BRAKE + ENCODER Axial load [N] 5000
37M3450000 (24VDC) 37M3450000 (48VDC) 37M3450000 (75VDC) 37M3460000 (24VDC) 37M3460000 (48VDC) 37M3460000 (75VDC) 37M3470000 (24VDC) 37M3470000 (48VDC) 37M3470000 (75VDC)
4500 4000 3500 3000 2500 2000 1500 1000 500 0 0 50 100 150 200 250 300
Speed [mm/s]
Ø 63 with pitch 20 screw, STEPPING motors Axial load [N] 1800
37M1450000 (48VDC) 37M1450000 (75VDC) 37M1450000 (140VDC)
1600 1400 1200 1000 800 600 400 200 0 0 100 200 300 400 500 600 700 800 900
Speed [mm/s]
14
1600
37M3450000 (24VDC) 37M3450000 (48VDC) 37M3450000 (75VDC) 37M3460000 (24VDC) 37M3460000 (48VDC) 37M3460000 (75VDC)
1400 1200 1000 800 600 400 200 0 0
100 200 300 400 500 600
Speed [mm/s] Ø 80 with pitch 5 screw, STEPPING motors Axial load [N] 37M1890000 + 37D1362001 (230VDC) 37M1890000 + 37D1362001 (115VDC)
ACTUATORS
Axial load [N]
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
Ø 63 with pitch 20 screw, STEPPING motors with BRAKE + ENCODER
Speed [mm/s]
Ø 80 with pitch 10 screw, STEPPING motors Axial load [N] 37M1890000 + 37D1362001 (230VDC) 37M1890000 + 37D1362001 (115VDC)
Speed [mm/s]
15
ACTUATORS ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
Ø 80 with pitch 32 screw, STEPPING motors Axial load [N] 37M1890000 + 37D1362001 (230VDC) 37M1890000 + 37D1362001 (115VDC)
Speed [mm/s] Ø 100 with pitch 10 screw, STEPPING motors Axial load [N] 37M1890000 + 37D1362001 (230VDC) 37M1890000 + 37D1362001 (115VDC)
Speed [mm/s]
Ø 100 with pitch 40 screw, STEPPING motors Axial load [N] 37M1890000 + 37D1362001 (230VDC) 37M1890000 + 37D1362001 (115VDC)
Speed [mm/s]
16
Nominal torque 37M2200000 or 37M4200000 (with brake) + 37D2200000 (200W) Nominal torque 37M2220000 or 37M4220000 (with brake) + 37D2400000 (400W)
6000 5000 4000
Max torque 37M2200000 or 37M4200000 (with brake) + 37D2200000 (200W)
3000
Max torque 37M2220000 or 37M4220000 (with brake) + 37D2400000 (400W)
2000 1000 0 0 50 100 150 200 250 300
Speed [mm/s] Ø 32 with pitch 12 screw, BRUSHLESS motors and BRUSHLESS motors with BRAKE Axial load [N] 2200
Nominal torque 37M2200000 or 37M4200000 (with brake) + 37D2200000 (200W)
2000 1800
ACTUATORS
Axial load [N] 7000
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
Ø 32 with pitch 4 screw, BRUSHLESS motors and BRUSHLESS motors with BRAKE
Nominal torque 37M2220000 or 37M4220000 (with brake) + 37D2400000 (400W)
1600 1400 1200
Max torque 37M2200000 or 37M4200000 (with brake) + 37D2200000 (200W) Max torque 37M2220000 or 37M4220000 (with brake) + 37D2400000 (400W)
1000 800 600 400 200 0 0 100 200 300 400 500 600 700 800 900
Speed [mm/s]
Ø 50 with pitch 5 screw, BRUSHLESS motors and BRUSHLESS motors with BRAKE Axial load [N] Nominal torque 37M2220000 or 37M4220000 (with brake) + 37D2400000 (400W)
7000 6000
Nominal torque 37M2330000 or 37M4330000 (with brake) + 37D2400000 (750W)
5000
Max torque 37M2220000 or 37M4220000 (with brake) + 37D2400000 (400W)
4000 3000
Max torque 37M2330000 or 37M4330000 (with brake) + 37D2400000 (750W)
2000 1000 0 0 50 100 150 200 250 300
Speed [mm/s]
17
ACTUATORS
Ø 50 with pitch 10 screw, BRUSHLESS motors and BRUSHLESS motors with BRAKE Axial load [N] 4000
Nominal torque 37M2220000 or 37M4220000 (with brake) + 37D2400000 (400W)
3500
Nominal torque 37M2330000 or 37M4330000 (with brake) + 37D2400000 (750W)
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
3000 2500
Max torque 37M2220000 or 37M4220000 (with brake) + 37D2400000 (400W)
2000 1500
Max torque 37M2330000 or 37M4330000 (with brake) + 37D2400000 (750W)
1000 500 0 0 100 200 300 400 500 600
Speed [mm/s] Ø 50 with pitch 16 screw, BRUSHLESS motors and BRUSHLESS motors with BRAKE Axial load [N] 2500
Nominal torque 37M2220000 or 37M4220000 (with brake) + 37D2400000 (400W)
2000
1500
Nominal torque 37M2330000 or 37M4330000 (with brake) + 37D2400000 (750W)
1000
Max torque 37M2220000 or 37M4220000 (with brake) + 37D2400000 (400W)
500
Max torque 37M2330000 or 37M4330000 (with brake) + 37D2400000 (750W)
0 0
100 200 300 400 500 600 700 800 900
Speed [mm/s]
Ø 63 - Ø 63 HD with pitch 5 screw, BRUSHLESS motors and BRUSHLESS motors with BRAKE (750 W) Axial load [N] Nominal torque 37M2330000 or 37M4330000 (with brake) + 37D2400000 (750W)
7000 6000
Max torque 37M2330000 or 37M4330000 (with brake) + 37D2400000 (750W)
5000 4000 3000 2000 1000 0 0 50 100 150 200 250
Speed [mm/s]
18
Nominal torque 37M2540000 or 37M4540000 (with brake) + 37D2400000 (1000W)
10000
Max torque 37M2540000 or 37M4540000 (with brake) + 37D2400000 (1000W)
8000
6000
4000
2000
0 0
50 100 150 200 250 300
Speed [mm/s] Ø 63 - Ø 63 HD with pitch 10 screw, BRUSHLESS motors and BRUSHLESS motors with BRAKE (750 W) Axial load [N] 4000
Nominal torque 37M2330000 or 37M4330000 (with brake) + 37D2400000 (750W)
3500 3000
ACTUATORS
Axial load [N] 12000
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
Ø 63 HD with pitch 5 screw, BRUSHLESS motors and BRUSHLESS motors with BRAKE (1000 W)
Max torque 37M2330000 or 37M4330000 (with brake) + 37D2400000 (750W)
2500 2000 1500 1000 500 0 0
50 100 150 200 250 300 350 400 450
Speed [mm/s]
Ø 63 HD with pitch 10 screw, BRUSHLESS motors and BRUSHLESS motors with BRAKE (1000 W) Axial load [N] 6000
Nominal torque 37M2540000 or 37M4540000 (with brake) + 37D2400000 (1000W)
5000
Max torque 37M2540000 or 37M4540000 (with brake) + 37D2400000 (1000W)
4000
3000
2000
1000
0 0
100 200 300 400 500 600
Speed [mm/s]
19
ACTUATORS
Ø 63 with pitch 20 screw, BRUSHLESS motors and BRUSHLESS motors with BRAKE Axial load [N] 2000
Nominal torque 37M2330000 or 37M4330000 (with brake) + 37D2400000 (750W)
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
1600
Max torque 37M2330000 or 37M4330000 (with brake) + 37D2400000 (750W)
1200
800
400
0 0 100 200 300 400 500 600 700 800 900
Speed [mm/s] Ø 80 with pitch 5 screw, BRUSHLESS motors and BRUSHLESS motors with BRAKE (1000W) Axial load [N] Max torque 37M2540000 or 37M4540000 (with brake) + 37D2400000 (1000W) in-line version (1:1) Nominal torque 37M2540000 or 37M4540000 (with brake) + 37D2400000 (1000W) in-line version (1:1) Max torque 37M2540000 or 37M4540000 (with brake) + 37D2400000 (1000W) geared version (1:1.25) Nominal torque 37M2540000 or 37M4540000 (with brake) + 37D2400000 (1000W) geared version (1:1.25)
Speed [mm/s]
Ø 80 with pitch 10 screw, BRUSHLESS motors and BRUSHLESS motors with BRAKE (1000W) Axial load [N] Max torque 37M2540000 or 37M4540000 (with brake) + 37D2400000 (1000W) in-line version (1:1) Nominal torque 37M2540000 or 37M4540000 (with brake) + 37D2400000 (1000W) in-line version (1:1) Max torque 37M2540000 or 37M4540000 (with brake) + 37D2400000 (1000W) geared version (1:1.25) Nominal torque 37M2540000 or 37M4540000 (with brake) + 37D2400000 (1000W) geared version (1:1.25)
Speed [mm/s]
20
Max torque 37M2770000 or 37M4770000 (with brake) + 37D2600001 (3000W) in-line version (1:1) Nominal torque 37M2770000 or 37M4770000 (with brake) + 37D2600001 (3000W) in-line version (1:1) Max torque 37M2770000 or 37M4770000 (with brake) + 37D2600001 (3000W) geared version (1:1.5) Nominal torque 37M2770000 or 37M4770000 (with brake) + 37D2600001 (3000W) geared version (1:1.5)
Speed [mm/s] Ø 80 with pitch 32 screw, BRUSHLESS motors and BRUSHLESS motors with BRAKE (3000W) Axial load [N] Max torque 37M2770000 or 37M4770000 (with brake) + 37D2600001 (3000W) in-line version (1:1)
ACTUATORS
Axial load [N]
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
Ø 80 with pitch 10 screw, BRUSHLESS motors and BRUSHLESS motors with BRAKE (3000W)
Nominal torque 37M2770000 or 37M4770000 (with brake) + 37D2600001 (3000W) in-line version (1:1) Max torque 37M2770000 or 37M4770000 (with brake) + 37D2600001 (3000W) geared version (1:1.5) Nominal torque 37M2770000 or 37M4770000 (with brake) + 37D2600001 (3000W) geared version (1:1.5)
Speed [mm/s]
Ø 100 with pitch 10 screw, BRUSHLESS motors and BRUSHLESS motors with BRAKE (3000W) Axial load [N] Max torque 37M2770000 or 37M4770000 (with brake) + 37D2600001 (3000W) in-line version with gear box (1:3)
Speed [mm/s]
Nominal torque 37M2770000 or 37M4770000 (with brake) + 37D2600001 (3000W) in-line version with gear box (1:3) Max torque 37M2770000 or 37M4770000 (with brake) + 37D2600001 (3000W) geared version (1:2) Nominal torque 37M2770000 or 37M4770000 (with brake) + 37D2600001 (3000W) geared version (1:2) Max torque 37M2770000 or 37M4770000 (with brake) + 37D2600001 (3000W) in-line version (1:1) Nominal torque 37M2770000 or 37M4770000 (with brake) + 37D2600001 (3000W) in-line version (1:1)
21
ACTUATORS ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
Ø 100 with pitch 40 screw, BRUSHLESS motors and BRUSHLESS motors with BRAKE (3000W) Axial load [N]
Speed [mm/s]
Max torque 37M2770000 or 37M4770000 (with brake) + 37D2600001 (3000W) in-line version with gear box (1:3) Nominal torque 37M2770000 or 37M4770000 (with brake) + 37D2600001 (3000W) in-line version with gear box (1:3) Max torque 37M2770000 or 37M4770000 (with brake) + 37D2600001 (3000W) geared version (1:2) Nominal torque 37M2770000 or 37M4770000 (with brake) + 37D2600001 (3000W) geared version (1:2) Max torque 37M2770000 or 37M4770000 (with brake) + 37D2600001 (3000W) in-line version (1:1) Nominal torque 37M2770000 or 37M4770000 (with brake) + 37D2600001 (3000W) in-line version (1:1)
LUBRICATION DIAGRAMS LUBRICATION OF VERSION WITH NON-ROTATING PISTON ROD • Retract the piston rod towards the rear head. The piston rod/piston ball screw/system must rest against the buffer of the rear head • Unscrew the cap on the lubricator port (see note 1 to the drawing on page 23) • Screw the lubricating pin (see accessory on page 35) into the thread. Make sure you enter the corresponding hole in the piston below. • Pump grease (code 9910506) in 4-5 times using a suitable lubricator • Unscrew the lubricating pin and make the piston rod perform four complete strokes. The piston rod should end up in the initial (retracted) position • Repeat the last two operations • The operation of re-greasing will have to be repeated every 200 km, approximately.
LUBRICATION OF VERSION WITHOUT NON-ROTATING PISTON ROD • Extend the piston rod completely. The piston rod/piston/ball screw system must rest against the buffer of the front head • Unscrew the cap on the lubricator port (see note 1 to the drawing on page 23) • Screw the lubricating pin (see accessory on page 35) into the thread. Make sure you enter the corresponding hole in the piston below. • Pump grease (code 9910506) in 4-5 times using a suitable lubricator • Unscrew the lubricating pin and make the piston rod perform four complete strokes. The piston rod should end up in the initial (extended) position • Repeat the last two operations • The operation of re-greasing will have to be repeated every 200 km, approximately.
22
DIMENSIONS
a = lubricator port (*) = only for Ø 63 - Ø 80 - Ø 100 + = add the stroke Ø 32 50 63 63 HD 80 100
ØB (d11) 30 40 45 45 60 90
Ø 32 50 63 63 HD 80 100
L1 86.3 100.8 112.3 132.3 181.1 200.6
B1 7 7 9 9 15 25
B2 19.5 28 34.5 34.5 42.5 21
BG 14.5 17.5 17.5 17.5 21 21
C1 16 25 25 25 31 34
CH1 17 21 26 26 41 65
CH2 17 24 24 24 30 30
CH3 6 8 8 8 10 10
ØD (f7) 20 25 30 30 45 70
L2 23 24 34 34 41.7 46.9
L3 27 28.4 39.5 39.5 47.2 54.9
L4 215 232.5
ØMM 19 24 29 29.5 42 69
N 4.5 5.5 5.5 5.5 5 5
O 19 19
P 14 19
Q 44 58
ØD1 (h7) 6.35 10 12 12 19 24 R (h7) 10 12
S 9 9
ØD2 32 50 63 63 80 100
ØD4 (h7) 3 3 3 3 3 5 T M10 M12
V 17.5 20
E 46 64.5 75.5 75.5 93 110 RT M6 M8 M8 M8 M10 M10
F 22 32 32 32 40 40
G 26 30 32 32 38 38 TG 32.5 46.5 56.5 56.5 72 89
G1 26 30 32 46 67 77 VA 3 5.5 5.5 5.5 5.5 8
VD 4.5 5.5 6.5 6.5 17.5 20
H 9 9 9 9 9 9
KK M10x1.25 M16x1.5 M16x1.5 M16x1.5 M20x1.5 M20x1.5
L 160 194 210 230 294 321.5
L0 134 157 173 193 248 270.5
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
ACTUATORS
CYLINDER DIMENSIONS (WITHOUT MOTOR)
WH 26 37 37 37 46 51
NOTES
23
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
ACTUATORS
MOTOR-DRIVE COUPLINGS FOR VARIOUS CYLINDER BORES MOTOR CODES Metal Work Manufacturer Metal Work Manufacturer STEPPING 37M1110000 Motor SANYO DENKI 103-H7123-1749 (4A 75V max) 37M1120000 Motor SANYO DENKI 103-H7126-1740 (4A 75V max) 37M1120001 Motor SANYO DENKI 103-H7126-6640 (5.6A 75V max) 37M1430000 Motor SANYO DENKI 103-H8221-6241 (6A 140V max) 37M1440000 Motor SANYO DENKI 103-H8222-6340 (6A 140V max) 37M1450000 Motor SANYO DENKI SM-2863-5255 (6A 140V max) 37M1470000 Motor B&R 80MPH6.101S000-01 (10A 80V max) 37M1890000 Motor SANYO DENKI 103-H8223-6341 (6A 230V max) STEPPING WITH BRAKE 37M5120000 Motore SANYO DENKI 103-H7126-1710B (4A 75V max) STEPPING WITH BRAKE + ENCODER 37M3220000 Motor B&R 80MPF3.500D114-01 (5A 80V max) 37M3230000 Motor B&R 80MPF5.500D114-01 (5A 80V max) 37M3430000 Motor B&R 80MPH1.600D114-01 (6A 80V max) 37M3460000 Motor B&R 80MPH3.600D114-01 (6A 80V max) 37M3450000 Motor B&R 80MPH4.101D114-01 (10A 80V max) 37M3470000 Motor B&R 80MPH6.101D114-01 (10A 80V max)
37D1332000 RTA NDC 96 (6A 24÷75VDC)
Ø32 Ø32 -
Ø32 ◆ Ø32 ◆ Ø32 Ø50 Ø50 Ø63 - Ø63 HD -
Ø32 -
Ø32 ◆
Metal Work Manufacturer Metal Work Manufacturer BRUSHLESS 37M2200000 Motor SANYO DENKI R2AA06020FXH11M (200W) 37M2220000 Motor SANYO DENKI R2AA06040FXH11M (400W) 37M2330000 Motor SANYO DENKI R2AA08075FXH11M (750W) 37M2540000 Motor SANYO DENKI R2AAB8100HXH29M (1000W) 37M2770000 Motor DELTA ECMA-J11330R4 (3000W) BRUSHLESS WITH BRAKE 37M4200000 Motor SANYO DENKI R2AA06020FCH11M (200W) 37M4220000 Motor SANYO DENKI R2AA06040FCH11M (400W) 37M4330000 Motor SANYO DENKI R2AA08075FCH11M (750W) 37M4540000 Motor SANYO DENKI R2AAB8100HCH29M (1000W) 37M4770000 Motor DELTA ECMA-J11330S4 (3000W)
NOTES
DRIVES CODES 37D1442000 RTA PLUS A4 (6A 77÷140VDC)
37D1552000 37D1362001 RTA PLUS B7 X-MIND B6 (10A 28÷62VAC) ● (6A 110÷230VAC) ●
Ø 50 Ø 50 Ø63 - Ø63 HD -
Ø32 ■ Ø32 ■ Ø32 ■ Ø50 ◆ Ø50 ◆ Ø63 - Ø63 HD ◆ Ø63 HD -
Ø50 ▲ Ø50 ▲ Ø63 - Ø63 HD ▲ Ø80 - Ø100
-
Ø32 ■
-
Ø32 ◆ Ø32 ■ Ø32 ■ Ø32 ◆ Ø32 ■ Ø32 ■ Ø50 Ø50 ▲ Ø50 ◆ Ø50 - Ø63 - Ø63 HD Ø50 - Ø63 - Ø63 HD ▲ Ø50 - Ø63 - Ø63 HD ◆ Ø63 - Ø63 HD Ø63 HD
MOTOR CODES
◆ Important! Limit current ■ Important! Limit current and voltage
24
37D1222000 RTA CSD 94 (4.4A 24÷48VDC)
37D2200000 SANYO DENKI RS1A01 (15A 200W)
DRIVES CODES 37D2400000 SANYO DENKI RS1A03 (30A 400÷750÷1000 W)
37D2600001 DELTA ASD-A2-3043-M (3000W)
Ø32 -
Ø32 - Ø50 Ø50 - Ø63 - Ø63 HD Ø63 HD - Ø80 -
Ø80 - Ø100
Ø32 -
Ø32 - Ø50 Ø50 - Ø63 - Ø63 HD Ø63 HD - Ø80 -
Ø80 - Ø100
▲ Important! Limit voltage ● Important! AC drive to continuous voltage VDC = VAC ·
2
VERSION WITH MOTOR Size Motor type
For any missing dimensions, please refer to page 23. Code for cylinder complete with motor 371032_ _ _ _ _ _2200 371032_ _ _ _ _ _2220 371032_ _ _ _ _ _1110 371032_ _ _ _ _ _1120 371032_ _ _ _ _ _1121 371050_ _ _ _ _ _2330 371063_ _ _ _ _ _1450 371H63_ _ _ _ _ _1450 371H63_ _ _ _ _ _1470 371080_ _ _ _ _ _2770 371100_ _ _ _ _ _2770
Code for motor mounted on the cylinder 37M2200000 37M2220000 37M1110000 37M1120000 37M1120001 37M2330000 37M1450000 37M1450000 37M1470000 37M2770000 37M2770000
Motor torque [Nm] 0.64 1.27 0.8 1.2 1.2 2.39 6.7 6.7 9.3 9.5 9.5
Coupling flange 60 60 NEMA 23 NEMA 23 NEMA 23 80 NEMA 34 NEMA 34 NEMA 34 130 130
VERSION WITH MOTOR AND BRAKE Size Motor type Code for cylinder complete with motor BRUSHLESS 371032_ _ _ _ _ _4200 371032_ _ _ _ _ _4220 32 STEPPING 371032_ _ _ _ _ _3220 371032_ _ _ _ _ _3230 371032_ _ _ _ _ _5120 BRUSHLESS 371050_ _ _ _ _ _4330 50 STEPPING 371050_ _ _ _ _ _3430 371050_ _ _ _ _ _3460 371063_ _ _ _ _ _3460 63 STEPPING 371063_ _ _ _ _ _3450 371H63_ _ _ _ _ _3450 63 HD STEPPING 371H63_ _ _ _ _ _3460 371H63_ _ _ _ _ _3470 80 BRUSHLESS 371080_ _ _ _ _ _4770 100 BRUSHLESS 371100_ _ _ _ _ _4770
Code for motor mounted on the cylinder 37M4200000 37M4220000 37M3220000 37M3230000 37M5120000 37M4330000 37M3430000 37M3460000 37M3460000 37M3450000 37M3450000 37M3460000 37M3470000 37M4770000 37M4770000
Motor torque [Nm] 0.64 1.27 1.2 2.5 1.2 2.39 2.9 5.5 5.5 6.3 5.5 6.3 9.3 9.5 9.5
Coupling flange 60 60 60 60 NEMA 23 80 NEMA 34 NEMA 34 NEMA 34 NEMA 34 NEMA 34 NEMA 34 NEMA 34 130 130
BRUSHLESS 32
STEPPING
50 63
BRUSHLESS STEPPING STEPPING
63 HD 80 100
BRUSHLESS BRUSHLESS
VERSION WITH MOTOR Size Motor type 50
STEPPING
80 100
STEPPING STEPPING
B
L1
L2
L3
60 60 56 56 56 80 85.5 85.5 86.6 130 130
62 62 45 45 45 77.4 63.5 63.5 63.5 120 126
69.5 95.5 53.8 75.8 75.8 107.3 127 127 130 187.5 187.5
15 15 12 12 12 35 16 16 16 26 40
B
L1
L2
L3
60 60 60 60 56 80 86.6 86.6 86.6 86.6 86.6 86.6 86.6 130 130
62 62 45 45 45 77.4 63.4 63.4 63.5 63.5 63.5 63.5 63.5 120 126
97.5 123.5 151.8 184.5 112 143 156.5 188.5 188.5 188.5 188.5 188.5 220.5 216 216
15 15 7 7 12 35 9.9 9.9 9.9 9.9 16 16 16 26 40
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
ACTUATORS
DIMENSIONS OF CYLINDERS WITH IN-LINE MOTOR
For any missing dimensions, please refer to page 23. Code for cylinder complete with motor 371050_ _ _ _ _ _1430 371050_ _ _ _ _ _1440 371080_ _ _ _ _ _1890 371100_ _ _ _ _ _1890
Code for motor mounted on the cylinder 37M1430000 37M1440000 37M1890000 37M1890000
Motor torque [Nm] 2.4 4.2 17.5 17.5
Coupling flange NEMA 34 NEMA 34 NEMA 42 NEMA 42
B
Ø B1
L1
L2
L3
83 83 106.4 110
86 86 106.4 106.4
61.4 61.4 102 109
62 92.2 221 221
25 25 35 35
25
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
ACTUATORS
DIMENSIONS OF CYLINDERS WITH IN-LINE MOTOR
VERSION WITH MOTOR Size Motor type
For any missing dimensions, please refer to page 23. Code for cylinder complete with motor 371050_ _ _ _ _ _2220 371063_ _ _ _ _ _2330 371H63_ _ _ _ _ _2330 371H63_ _ _ _ _ _2540 371080_ _ _ _ _ _2540
Code for motor mounted on the cylinder 37M2220000 37M2330000 37M2330000 37M2540000 37M2540000
Motor torque [Nm] 1.27 2.39 2.39 3.18 3.18
Coupling flange 60 80 80 86 86
VERSION WITH MOTOR AND BRAKE Size Motor type Code for cylinder complete with motor 50 BRUSHLESS 371050_ _ _ _ _ _4220 63 BRUSHLESS 371063_ _ _ _ _ _4330 BRUSHLESS 371H63_ _ _ _ _ _4330 63 HD 371H63_ _ _ _ _ _4540 80 BRUSHLESS 371080_ _ _ _ _ _4540
Code for motor mounted on the cylinder 37M4220000 37M4330000 37M4330000 37M4540000 37M4540000
Motor torque [Nm] 1.27 2.39 2.39 3.18 3.18
Coupling flange 60 80 80 86 86
50 63 63 HD 80
BRUSHLESS BRUSHLESS BRUSHLESS BRUSHLESS
B
B1
L1
L2
L3
74.5 94 94 94 93
60 80 80 84.4 84.4
61.4 78.5 78.5 78.5 102
95.5 107.3 107.3 137.1 137.1
25 25 25 25 35
B
B1
L1
L2
L3
74.5 94 94 94 93
60 80 80 84.4 84.4
61.4 78.5 78.5 78.5 102
123.5 143 143 163 163
25 25 25 25 35
DIMENSIONS OF CYLINDERS WITH IN-LINE MOTOR AND GEAR BOX
VERSION WITH MOTOR Size Motor type
Code for cylinder Code for motor Code for gear Motor torque complete with motor mounted on the cylinder mounted on the cylinder [Nm] 371100_ _ _ _ _ _6770 37M2770000 37R0364000 9.5
Coupling flange 130
VERSION WITH MOTOR AND BRAKE Size Motor type Code for cylinder Code for motor Code for gear Motor torque complete with motor mounted on the cylinder mounted on the cylinder [Nm] 100 BRUSHLESS 371100_ _ _ _ _ _7770 37M4770000 37R0364000 9.5
Coupling flange 130
100
26
For any missing dimensions, please refer to page 23.
BRUSHLESS
B
L1
L2
L3
L4
130
135
338.5
49
151
B
L1
L2
L3
L4
130
135
367
49
151
VERSION WITH MOTOR Size Motor type Code for cylinder Code for motor Motor complete with motor mounted on torque the cylinder [Nm] STEPPING 371032_ _ _ _ _ _1110 37M1110000 0.8 32 371032_ _ _ _ _ _1120 37M1120000 1.2 371032_ _ _ _ _ _1121 37M1120001 1.2 63 STEPPING 371063_ _ _ _ _ _1450 37M1450000 6.7 63 HD STEPPING 371H63_ _ _ _ _ _1450 37M1450000 6.7 80 BRUSHLESS 371080_ _ _ _ _ _2540 37M2540000 3.18 VERSION WITH MOTOR AND BRAKE Size Motor type Code for cylinder Code for motor Motor complete with motor mounted on torque the cylinder [Nm] STEPPING 371032_ _ _ _ _ _3220 37M3220000 1.2 32 371032_ _ _ _ _ _3230 37M3230000 2.5 371032_ _ _ _ _ _5120 37M5120000 1.2 80 BRUSHLESS 371080_ _ _ _ _ _4540 37M4540000 3.18
VERSION WITH MOTOR Size Motor type Code for cylinder complete with motor 50
STEPPING
Code for motor Motor mounted on torque the cylinder [Nm] 371050_ _ _ _ _ _1430 37M1430000 2.4 371050_ _ _ _ _ _1440 37M1440000 4.2
For any missing dimensions, please refer to page 23. Coupling flange NEMA 23 NEMA 23 NEMA 23 NEMA 34 NEMA 34 86
Coupling flange 60 60 NEMA 23 86
ØB B1 (d11) 30 30 30 45 45 45
128.5 128.5 128.5 179.5 179.5 204.5
ØB B1 (d11) 30 30 30 45
128.5 128.5 128.5 204.5
B2
B3
B4
B5
BG
E
L1
62 62 62 92 92 115
31 31 31 46 46 57
67.5 67.5 67.5 87.5 87.5 97.5
56 56 56 84.5 85.5 86
B2
B3
B4
B5
BG
E
L1
62 62 62 115
31 67.5 60 31 67.5 60 31 67.5 56 57 97.5 86
15 15 15 21
46 46 46 -
49 49 49 80.5
15 46 49 15 46 49 15 46 49 17 75.5 70 17 75.5 70 21 - 80.5
L2
L3
L4
TG
RT
VA
53.8 75.8 75.8 127 127 137.1
50 50 50 72 72 -
48 48 48 68 68 -
32.5 32.5 32.5 56.5 56.5 72
M6 M6 M6 M8 M8 M10
4 4 4 4 4 4
L2
L3
L4
TG
RT
VA
151.8 50 184.5 50 112 50 163 -
48 32.5 M6 48 32.5 M6 48 32.5 M6 72 M10
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
ACTUATORS
DIMENSIONS OF CYLINDERS WITH GEARED MOTOR
4 4 4 4
For any missing dimensions, please refer to page 23. Coupling flange NEMA 34 NEMA 34
ØB B1 (d11)
B2
B3
B4
B5
40 159.5 79 39.5 80 40 159.5 79 39.5 80
80 83
ØB6 BG
86 86
E
L1
L2
L3
TG
RT
VA
17 64.5 59 62 61 46.5 M8 17 64.5 59 92.2 61 46.5 M8
4 4
27
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
ACTUATORS
DIMENSIONS OF CYLINDERS WITH GEARED MOTOR
VERSION WITH MOTOR AND BRAKE Size Motor type Code for cylinder complete with motor 50
STEPPING
Code for motor Motor mounted on torque the cylinder [Nm] 371050_ _ _ _ _ _3430 37M3430000 2.9 371050_ _ _ _ _ _3460 37M3460000 5.5
VERSION WITH MOTOR Size Motor type Code for cylinder complete with motor
Code for motor Motor mounted on torque the cylinder [Nm] 32 BRUSHLESS 371032_ _ _ _ _ _2200 37M2200000 0.64 371032_ _ _ _ _ _2220 37M2220000 1.27
28
For any missing dimensions, please refer to page 23. Coupling flange NEMA 34 NEMA 34
ØB (d11)
B1
B2
40 159.5 79 40 159.5 79
B3
B4
B5
BG
E
L1
39.5 39.5
80 80
86.6 86.6
17 17
64.5 64.5
L2
L3
59 156.5 61 59 188.5 61
TG
RT
VA
46.5 46.5
M8 M8
4 4
For any missing dimensions, please refer to page 23. Coupling flange 60 60
ØB B1 (d11)
B2
B3
B4
B5
BG
E
L1
L2
L3
L4
30 128.5 62 30 128.5 62
31 31
67.5 67.5
60 60
15 15
46 46
49 49
69.5 95.5
50 50
51 51
TG
RT
VA
32.5 M6 32.5 M6
4 4
For any missing dimensions, please refer to page 23.
VERSION WITH MOTOR Size Motor type Code for cylinder complete with motor
Coupling flange
ØB (d11)
B1
B2
B3
B4
B5
BG
L1
L2
TG
RT
VA
80 100
NEMA 42 NEMA 42
45 55
249 285
130 150
65 75
120 120
106.4 106.4
21 21
84.5 91.5
221 221
72 89
M10 M10
4 4
STEPPING STEPPING
Code for motor Motor mounted on torque the cylinder [Nm] 371080_ _ _ _ _ _1890 37M1890000 17.5 371100_ _ _ _ _ _1890 37M1890000 17.5
ACTUATORS BRUSHLESS 371050_ _ _ _ _ _2220 BRUSHLESS 371063_ _ _ _ _ _2330 BRUSHLESS 371H63_ _ _ _ _ _2330 371H63_ _ _ _ _ _2540 63 HD STEPPING 371H63_ _ _ _ _ _1470 50 63
VERSION WITH MOTOR AND BRAKE Size Motor type Code for cylinder complete with motor BRUSHLESS 371050_ _ _ _ _ _4220 BRUSHLESS 371063_ _ _ _ _ _4330 63 STEPPING 371063_ _ _ _ _ _3460 371063_ _ _ _ _ _3450 BRUSHLESS 371H63_ _ _ _ _ _4330 371H63_ _ _ _ _ _4540 63 HD STEPPING 371H63_ _ _ _ _ _3470 371H63_ _ _ _ _ _3450 371H63_ _ _ _ _ _3460 50
Code for motor Motor mounted on torque the cylinder [Nm] 37M2220000 1.27 37M2330000 2.39 37M2330000 2.39 37M2540000 3.18 37M1470000 9.3
Code for motor Motor mounted on torque the cylinder [Nm] 37M4220000 1.27 37M4330000 2.39 5.5 37M3460000 37M3450000 6.3 37M4330000 2.39 37M4540000 3.18 9.3 37M3470000 37M3450000 6.3 37M3460000 5.5
VERSION WITH MOTOR Size Motor type Code for cylinder complete with motor 50 80 100
Code for motor Motor mounted on torque the cylinder [Nm] BRUSHLESS 371050_ _ _ _ _ _2330 37M2330000 2.39 BRUSHLESS 371080_ _ _ _ _ _2770 37M2770000 9.5 BRUSHLESS 371100_ _ _ _ _ _2770 37M2770000 9.5
VERSION WITH MOTOR AND BRAKE Size Motor type Code for cylinder Code for motor Motor complete with motor mounted on torque the cylinder [Nm] BRUSHLESS 371032_ _ _ _ _ _4200 37M4200000 0.64 32 371032_ _ _ _ _ _4220 37M4220000 1.27 50 BRUSHLESS 371050_ _ _ _ _ _4330 37M4330000 2.39 80 BRUSHLESS 371080_ _ _ _ _ _4770 37M4770000 9.5 100 BRUSHLESS 371100_ _ _ _ _ _4770 37M4770000 9.5
Coupling flange
ØB (d11)
B1
B2
B3
B4
B5
60 80 80 86 NEMA 34
40 45 45 45 45
159.5 179.5 179.5 179.5 179.5
79 92 92 92 92
39.5 46 46 46 46
Coupling flange
ØB (d11)
B1
B2
B3
B4
60 80 NEMA 34 NEMA 34 80 86 NEMA 34 NEMA 34 NEMA 34
40 45 45 45 45 45 45 45 45
159.5 179.5 179.5 179.5 179.5 179.5 179.5 179.5 179.5
79 92 92 92 92 92 92 92 92
39.5 46 46 46 46 46 46 46 46
80 87.5 87.5 87.5 87.5 87.5 87.5 87.5 87.5
BG
E
17 17 17 17 17
64.5 75.5 75.5 75.5 75.5
B5
BG
E
L1
L2
60 80 86.6 86.6 80 86 86.6 86.6 86.6
17 17 17 17 17 17 17 17 17
64.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5
59 70 70 70 70 70 70 70 70
123.5 143 188.5 188.5 143 163 220.5 188.5 188.5
80 60 87.5 80 87.5 80 87.5 86 87.5 86.6
L1
L2
L3
TG
RT
VA
46.5 56.5 56.5 56.5 56.5
M8 M8 M8 M8 M8
4 4 4 4 4
L3
TG
RT
VA
61 72 72 72 72 72 72 72 72
46.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5
M8 M8 M8 M8 M8 M8 M8 M8 M8
4 4 4 4 4 4 4 4 4
59 95.5 61 70 107.3 72 70 107.3 72 70 137.1 72 70 130 72
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
VERSION WITH MOTOR Size Motor type Code for cylinder complete with motor
For any missing dimensions, please refer to page 23.
For any missing dimensions, please refer to page 23. Coupling flange 80 130 130
Coupling flange 60 60 80 130 130
ØB B1 (d11)
B2
B3
B4
B5
40 159.5 79 39.5 80 80 45 249 130 65 119 130 55 285 150 75 145 130
ØB B1 (d11)
B2
B3
B4
B5
30 128.5 62 31 67.5 60 30 128.5 62 31 67.5 60 40 159.5 79 39.5 80 80 45 249 130 65 119 130 55 285 150 75 145 130
BG
E
L1
L2
L3
17 64.5 59 107.3 61 21 - 84.5 187.5 21 - 91.5 187.5 -
BG
E
L1
L2
L3
15 46 49 67.5 50 15 46 49 123.5 50 17 64.5 59 143 61 21 - 84.5 216 21 - 91.5 216 -
L4
TG
RT
64 46.5 M8 72 M10 89 M10
L4
TG
RT
51 32.5 M6 51 32.5 M6 64 46.5 M8 72 M10 89 M10
VA
4 4 4
VA
4 4 4 4 4
29
KEY TO CODES FOR ELECTRIC CYLINDER SERIE ELEKTRO ISO 15552
KEY TO CODES FOR ELECTRIC CYLINDER SERIE ELEKTRO ISO 15552
ACTUATORS
KEY TO CODES CYLINDER WITHOUT MOTOR CYL
37
1
0
32 BORE
0 STD ◆ H Heavy duty
32 50 63 80 100
TYPE 37 Electric actuators
1 ISO 15552 electric cylinder
0100 STROKE
1 SCREW PITCH 1 Pitch 4 2 Pitch 5 4 Pitch 10 5 Pitch 12 6 Pitch 16 7 Pitch 20 8 Pitch 32 9 Pitch 40
5 VERSION 5 Without antirotation IP40 6 With antirotation IP40 7 Without antirotation IP55/IP65 8 With antirotation IP55/IP65
NB: For the possible ordering codes, please refer to the next page. ◆ Only for Ø63 with screw pitch 5 or pitch 10 NB: An piston rod anti-rotation system must be used. If the piston rod is not fixed firmly to an element, a flange or to any other device preventing it from rotating, a cylinder in the anti-rotation version must be used.
KEY TO CODES CYLINDER WITH MOTOR CYL
37 TYPE
1
37 Electric actuators
1 ISO 15552 electric cylinder
0
0 STD ◆ H Heavy duty
32 BORE 32 50 63 80 100
0100 STROKE
1 SCREW PITCH 1 Pitch 4 2 Pitch 5 4 Pitch 10 5 Pitch 12 6 Pitch 16 7 Pitch 20 8 Pitch 32 9 Pitch 40
1 VERSION IN-LINE IN-LINE ● 1 Without antirotation IP40 ● 2 With antirotation IP40 ■ 3 Without antirotation IP55/IP65 ■ 4 With antirotation IP55/IP65 GEARED ● 5 Without antirotation IP40 ● 6 With antirotation IP40 ■ 7 Without antirotation IP55/IP65 ■ 8 With antirotation IP55/IP65
1
2
2
0
DRIVE MOTOR 1 STEPPING 2 BRUSHLESS 3 STEPPING with BRAKE + Encoder 4 BRUSHLESS with BRAKE 5 STEPPING with BRAKE without Encoder 6 BRUSHLESS with gear box 7 BRUSHLESS with BRAKE + gear box
FLANGE 1 NEMA 23 2 60 3 80 4 NEMA 34 5 86 7 130 8 NEMA 42
TORQUE 0 0÷0.79 Nm 1 0.8÷1.19 Nm 2 1.2÷2.19 Nm 3 2.2÷3 Nm 4 3.01÷5 Nm 5 6.21÷7 Nm 6 5.01÷6.2 Nm 7 7.01÷10 Nm 9 15.01÷25 Nm
0 Base 1 Greater rpm
NB: For the possible ordering codes, please refer to the next page. ◆ Only for Ø63 with screw pitch 5 or pitch 10 ● Version available for all STEPPING and BRUSHLESS motors, all sizes ■ Version IP55 available for STEPPING motors, for only the sizes 50, 63, 80 and 100 all the motors, with the exception of motor code 37M1470000; for Ø 32 only for motor code 37M1120001; version IP65 available for BRUSHLESS motors, BRUSHLESS with BRAKE and STEPPING with BRAKE + ENCODER motors (all sizes).) NB: An piston rod anti-rotation system must be used. If the piston rod is not fixed firmly to an element, a flange or to any other device preventing it from rotating, a cylinder in the anti-rotation version must be used.
30
Ø 50
Drive Version Screw pitch 371032_ _ _ _
Drive Version Screw pitch 1 5
1 2 5 6
1110 1120 1121 5120 2200 2220 3220 3230 4200 4220
3 4 7 8
1121 2200 2220 3220 3230 4200 4220
_ _ _ _ = Enter the stroke in mm
371050_ _ _ _
Drive Version Screw pitch 2 4 6
1 2 3 4 5 6 7 8
1430 1440 2220 2330 3430 3460 4220 4330
_ _ _ _ = Enter the stroke in mm
Ø 80
Ø 63 HD
2 4
1 2 5 6
3 4 7 8
1450 1470 2330 2540 3450 3460 3470 4330 4540 1450 2330 2540 3450 3460 3470 4330 4540
_ _ _ _ = Enter the stroke in mm
371080_ _ _ _
371063_ _ _ _
2 4 7
1 2 3 4 5 6 7 8
1450 2330 3450 3460 4330
_ _ _ _ = Enter the stroke in mm
Ø 100
Drive Version Screw pitch
Drive Version Screw pitch 371H63_ _ _ _
Ø 63
Drive Version Screw pitch 2
3 4 7 8
1890 2540 4540
4
3 4 7 8
1890 2540 2770 4540 4770
3 4 7 8
1890 2770 4770
8
_ _ _ _ = Enter the stroke in mm
371100_ _ _ _
4 9
3 4
1890 2770 4770 6770 7770
7 8
1890 2770 4770
KEY TO CODES FOR ELECTRIC CYLINDER SERIE ELEKTRO ISO 15552
Ø 32
ACTUATORS
POSSIBLE ORDERING CODES
_ _ _ _ = Enter the stroke in mm
NOTES
31
ACCESSORIES FOR ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552 N.B.: Where specified, limit the maximum axial loads (Fmax) according to the electric cylinders FOOT - MODEL A
ACCESSORIES FOR ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
ACTUATORS
STEEL Code W0950322001 W0950502001 W0950632001 W0950632001 W095E802001 W095EA12001
Ø 32 50 63 63 HD 80 100
Ø AB 7 9 9 9 12 14
AH 32 45 50 50 68.5* 79*
AO 11 15 15 15 20 25
AT 4 4 6 6 6 6
AU 24 32 32 32 41 41
TR 32 45 50 50 63 75
E 45 65 75 75 95 115
Weight [g] 76 162 266 266 414 518
* Dimensions not to ISO 15552 Note: Individually packed with 2 screws
FOOT ON CYLINDER HEADS STEEL Code 0950807042 0951007042
Weight [g] Fmax [N] Ø Ø AB AH AO AT AU TR E ØM H7 N P Q R H7 SA 80 11 93 19 22 35 120 145 8 26 6 2 8 215 770 10000 100 13 111 19 24 35 140 165 8 27 6 2 8 232.5 945 16000
Note: Individually packed with 2 screws, 3 pins
FEMALE HINGE - MODEL B ALUMINIUM Code W0950322003 W0950502003 W0950632003 W0950632003
Ø 32 50 63 63 HD
UB 45 60 70 70
CB 26 32 40 40
FL 22 27 32 32
øCD 10 12 16 16
MR 10 12 16 16
STEEL Code Ø UB CB FL øCD MR W095E322003 32 45 26 22 10 10 W095E502003 50 60 32 27 12 12 W095E632003 63 70 40 32 16 16 W095E632003 63 HD 70 40 32 16 16 W095E802003 80 90 50 36 16 16 W095EA12003 100 110 60 41 20 20 Note: Supplied with 4 screws, 4 washers, 2 snap-rings, 1 pin
L 12 15 20 20
Weight [g] 116 252 394 394
Fmax [N] 800 2000 3000 3000
L 13 16 21 21 22 27
Weight [g] 348 756 1182 1182 2010 3255
Fmax [N] 1600 4000 6000 6000 10000 16000
MALE HINGE - MODEL BA ALUMINIUM Code W0950322004 W0950502004 W0950632004 W0950632004
Ø 32 50 63 63 HD
EW 26 32 40 40
FL 22 27 32 32
MR 11 13 17 17
øCD 10 12 16 16
L 12 15 20 20
Weight [g] 94 220 316 316
Fmax [N] 800 2000 3000 3000
STEEL Code W095E322004 W095E502004 W095E632004 W095E632004 W095E802004 W095EA12004
Ø 32 50 63 63 HD 80 100
EW 26 32 40 40 50 60
FL 22 27 32 32 36 41
MR 10 12 16 16 16 20
øCD 10 12 16 16 16 20
L 13 16 21 21 22 27
Weight [g] 282 660 948 948 1734 2550
Fmax [N] 1600 4000 6000 6000 10000 16000
Note: Supplied with 4 screws, 4 washers
32
Fmax [N] 1600 4000 6000 6000 10000 16000
Ø 32 50 63 63 HD
DL 22 27 32 32
MS 16 19 24 24
L 12 15 20 20
øCX 10 12 16 16
EX 14 16 21 21
Weight [g] 106 236 336 336
Fmax [N] 800 2000 3000 3000
STEEL Code W095E322006 W095E502006 W095E632006 W095E632006 W095E802006 W095EA12006
Ø 32 50 63 63 HD 80 100
DL 22 27 32 32 36 41
MS 15 20 23 23 27 30
L 14 17 22 22 23 28
øCX 10 16 16 16 20 20
EX 14 21 21 21 25 25
Weight [g] 318 708 1008 1008 1716 2520
Fmax [N] 1600 4000 6000 6000 10000 16000
Note: Supplied with 4 screws, 4 washers
CETOP HINGE FOR MODEL B - MODEL GL ALUMINIUM Code W0950322008 W0950502008 W0950632008 W0950632008
Ø 32 50 63 63 HD
A 26 32 40 40
B 19 26 33 33
C 7 9 11 11
D 10 12 16 16
E 25 32 40 40
F 20 32 50 50
G 32 45 63 63
H 37 54 75 75
I 41 52 63 63
L 18 25 32 32
M 8 10 12 12
N 10 12 15 15
Weight [g] 96 212 440 440
Fmax [N] 800 2000 3000 3000
Note: Supplied with 4 screws, 4 washers
ISO HINGE FOR MODEL B - MODEL GS ALUMINIUM Code W0950322108 W0950502108 W0950632108 W0950632108
Ø 32 50 63 63 HD
B 25.5 31.5 39.5 39.5
C 32.5 46.5 56.5 56.5
D 45 65 75 75
E 7 9 9 9
G 32 45 50 50
J 11 13 17 17
L 10 12 12 12
M 10 12 16 16
N 10 12 15 15
Weight [g] 106 252 350 350
Fmax [N] 800 2000 3000 3000
Fmax [N] 800 2000 3000 3000
ACCESSORIES FOR ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
ALUMINIUM Code W0950322006 W0950502006 W0950632006 W0950632006
ACTUATORS
ARTICULATED MALE HINGE - MODEL BAS
Note: Supplied with 4 screws, 4 washers
ISO 15552 HINGE FOR MODEL B - MODEL AB7 ALUMINIUM Code W0950322017 W0950502017 W0950632017 W0950632017
Ø 32 50 63 63 HD
EM 26 32 40 40
B 20 26 30 30
ØHB 6.6 9 9 9
ØCK 10 12 16 16
TE 38 50 52 52
RA 18 30 35 35
PH 32 45 50 50
UR 31 45 50 50
UL 51 65 67 67
L 3 3 2 2
BT EA 8 10 12 16 14*16 14*16
P 21 21 21 21
Q 3 3 3 3
Weight [g] 60 162 191 191
STEEL Code W095E322017 W095E502017 W095E632017 W095E632017 W095E802017 W095EA12017
Ø 32 50 63 63 HD 80 100
EM 26 32 40 40 50 60
B 20 26 30 30 30 38
ØHB 6.6 9 9 9 11 11
ØCK 10 12 16 16 16 20
TE 38 50 52 52 66 76
RA 18 30 35 35 40 50
PH 32 45 50 50 63 71
UR 31 45 50 50 60 70
UL 51 65 67 67 86 96
L 3 3 2 2 7 5
BT 8 12 12 12 14 15
P 21 21 21 21 21 11
Q 3 3 3 3 3 3
Weight [g] 180 486 573 573 996 1566
EA 10 16 16 16 20 20
Fmax [N] 1600 4000 6000 6000 10000 16000
* Dimensions not to ISO 15552
33
FRONT FLANGE - MODEL C
ACTUATORS
Code W0950322002 W0950502002 W0950632002 W0950632002
Ø 32 50 63 63 HD
TF 64 90 100 100
UF 80 110 120 120
E 50 65 75 75
MF 10 12 12 12
R 32 45 50 50
øFB 7 9 9 9
W 16 25 25 25
Weight [g] 246 522 670 670
F M10x1.25 M16x1.5 M16x1.5 M16x1.5 M20x1.5 M20x1.5
H 6 8 8 8 9 9
CH 17 24 24 24 30 30
Weight [g] 6 20 20 20 32 32
C 20 32 32 32 40 40
A 20 32 32 32 40 40
L 52 83 83 83 105 105
F 40 64 64 64 80 80
Fmax [N] 1600 5000 7000 7000
ACCESSORIES FOR ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
Note: Supplied with 4 screws
ROD NUT - MODEL S Code 0950322010 0950502010 0950502010 0950502010 0950802010 0950802010
Ø 32 50 63 63 HD 80 100
Note: Individually packed
FORK MODEL GK-M Code W0950322020 W0950502020 W0950502020 W0950502020 W0950802020 W0950802020
Ø 32 50 63 63 HD 80 100
øM 10 16 16 16 20 20
B 10 16 16 16 20 20
D M10x1.25 M16x1.5 M16x1.5 M16x1.5 M20x1.5 M20x1.5
N 26 40 40 40 40 48
Weight [g] 92 340 340 340 690 690
Note: Individually packed
ROD EYE - MODEL GA-M Code W0950322025 W0950502025 W0950502025 W0950502025 W0950802025 W0950802025
Ø 32 50 63 63 HD 80 100
øM 10 16 16 16 20 20
C 15 22 22 22 26 26
B1 10.5 15 15 15 18 18
B 14 21 21 21 25 25
A 28 42 42 42 50 50
L 57 85 85 85 102 102
F 43 64 64 64 77 77
D M10x1.25 M16x1.5 M16x1.5 M16x1.5 M20x1.5 M20x1.5
øG 15 22 22 22 27.5 27.5
CH 17 22 22 22 30 30
øG1 19 22 22 22 27 27
Weight [g] 78 226 226 226 404 404
SW5 17 24 24 24 30 30
Weight [g] 216 620 620 620 680 680
Note: Individually packed
SELF ALIGNING ROD COUPLER - MODEL GA-K Code W0950322030 W0950502030 W0950502030 W0950502030 W0950802030 W0950802030
Ø 32 50 63 63 HD 80 100
Note: Individually packed
34
A M10x1.25 M16x1.5 M16x1.5 M16x1.5 M20x1.5 M20x1.5
B 20 32 32 32 40 40
C 20 32 32 32 40 40
D 71 103 103 103 119 119
øF 22 32 32 32 32 32
øE 4 4 4 4 4 4
SW1 12 20 20 20 20 20
SW2 30 41 41 41 41 41
SW3 30 41 41 41 41 41
SW4 19 30 30 30 30 30
+ = ADD THE STROKE
STEEL Code 0950322107 0950502107 0950632107 0950632107
Ø 32 50 63 63 HD
X (min) 63 83 88 88
IN LINE 123 148 163 163
X (max) GEARED * * * *
TM 50 75 90 90
TL 12 16 20 20
TD e 9 12 16 20 20
TK 22 28 36 36
UW 65 95 105 105
Weight [g] 170 580 950 950
Fmax [N] 500 1200 2000 2000
ACTUATORS
INTERMEDIATE HINGE - MODEL EN
COUNTER-HINGE FOR MODEL EN - MODEL EL Code W0950322009 W0950402009 W0950632009 W0950632009
Ø 32 50 63 63 HD
A 46 55 65 65
A1 32 36 42 42
B 18 21 23 23
C 30 36 40 40
C1 15 18 20 20
D1 11 15 18 18
D2 7 9 11 11
D 12 16 20 20
E 6.5 8.5 10.5 10.5
Note: 2-pieces pack with 4 screws
GREASING NEEDLE Code 0950327108 0950507108 0950637108 0950637108 0950637108 0951007108 1 = GREASE NIPPLE B M8x1 UNI 7662 GALVANIZED
Ø 32 50 63 80 100 100
Pitch 10 40
X 12 19.3 23.6 23.6 23.6 28.6
H 10.5 12 13 13
øL 22 28 35 35
Weight [g] 162 278 414 414
ACCESSORIES FOR ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
* Depending on motor length Note: Supplied with 8 grub screws, 2 pins
Note: Individually packed
GREASE Code 9910506
Description Grease pipe RHEOLUBE 363 AX1
Weight [g] 400
NOTES
35
ACCESSORIES AND SPARE PARTS FOR ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
ACTUATORS
GUIDE UNIT Version Sliding on bronze bushings (GDH)
Code Bore Type W0700322... 32* UNIT MW DH 032... W0700502... 50 UNIT MW DH 050... W0700632... 63 UNIT MW DH 063... W070E802... 80 UNIT MW DH 080... W070EA12... 100 UNIT MW DH 100... * V-Lock version also available. Note: The guide units must only be used with anti-rotation cylinders. To complete the type and code, add the 3-digit stroke (e.g. 50=050) For technical data and dimensions see general catalogue W0700323... 32* UNIT MW DM 032... W0700503... 50 UNIT MW DM 050... W0700633... 63 UNIT MW DM 063... W070E803... 80 UNIT MW DM 080... W070EA13... 100 UNIT MW DM 100... * V-Lock version also available. Note: The guide units must only be used with anti-rotation cylinders. To complete the type and code, add the 3-digit stroke (e.g. 50=050) For technical data and dimensions see general catalogue
Sliding on ball bearing (GDM)
RETRACTABLE SENSOR WITH INSERTION FROM ABOVE Code W0952025390 W0952225390 W0952029394 W0952022180 W0952222180 W0952028184 W0952125556 W0952025500* W0952029504* W0952022500* W0952128184*
Description HALL N.O. sensor, vertical insertion 2.5 m HALL N.O. sensor, vertical insertion 2.5 m robotics HALL N.O. sensor, vertical insertion 300 mm M8 robotics REED N.O. sensor, vertical insertion 2.5 m REED N.O. sensor, vertical insertion 2.5 m robotics REED N.O. sensor, vertical insertion 300 mm M8 robotics HALL N.O. sensor, vertical insertion 2 m ATEX HALL N.O. sensor, vertical insertion HS 2.5 m HALL N.O. sensor, vertical insertion HS 300 mm M8 REED N.O. sensor, vertical insertion HS 2.5 m REED N.O. sensor, vertical insertion HS 300 mm M8
* For use when standard sensors do not detect the magnet, e.g. near metal masses. Note: Individually packed. For technical data see general catalogue.
SPARE PARTS ELEKTRO ISO 15552 Ø 100 GEAR BOX
L2
L6
±0
L1
D8
N1
D3 h7
D4
D5
D1 h7
D2 h7
L3
D6
D7
L4
N1
45°
Code
Description
Application
COUT nominal [Nm]
37R0364000 Gear box Elektro ISO 15552 100 MP105 1:3 Ø 100
36
www.metalwork.eu
D9
.05
L5
NIN nominal [1/min]
J reduced to motor shaft Mass [kgmm2] [kg]
D1 D2 D3
2500
222
25 70 106 24 110 85 M8 145 M8x20 57.5 5
6.5
D4 D5
D6 D7 D8
D9
Dimensions and data shown in this catalogue are subject to variations at any time without prior notice
L1
L2 L3
L4
L5
L6
N1
50.5 107.5 48 6.5 120
MNWS01098_GB - IM00_10/2016