E A SYU P 7000 S H E LV I N G SYSTE M S STO R A G E SYSTE M S MEZZANINE SYSTEMS
NORTH AMERICAN STEEL
EASYUP 7000 can easily be extended to provide multiple storage levels where ceiling heights permit. Economical method to add storage without adding floor space by either: extending your existing (or new) shelving by installing a Catwalk System to reach the upper level; or placing complete Mezzanine floor over your existing (or new) shelving, using the upper floor for storage. Stairs, and rail, drop zones, safety gates and conveyors are available for maximum efficiency.
Kwikerect Steel Shelving
EASY-UP 7000 SHELVING SYSTEMS
AUTOMOTIVE STORAGE EASYUP 7000 specialty units have been designed for automotive storage:
Tire Racks:
15”d x 72”w units for tire storage.
Muffler Racks:
Open shelf unit with wire mesh top shelf for muffler storage.
Pallet Racking Systems
Fender & Trim Racks: Open unit with back supports for vertical storage. Bulk Storage:
Accessible from all sides to depth of 48” x 96”. Back to Back units allow storage up to 48” x 96”.
Small Parts:
Plastic, cardboard or steel bins, plus full extension drawer inserts are available.
AUTHORIZE D DISTRI BUTOR:
Display & Convenience: Add peg board to end of rows for hanging belts, gaskets etc.
Clothes Lockers HIGH RISE SYSTEMS EASYUP 7000 heavy duty double post end frames, rigid cross members and double hooking beams provide storage units up to 40 feet in height. Cross aisle supports are provided to prevent tipping and add rigidity. Open access to all shelves allow easy picking by entry guided wire or rail picker trucks.
MAXIMUM EVENLY DISTRIBUTED STATIC LOAD PER PAIR OF BEAMS BEAM STYLE LD V-Shaped Beam MD Medium Duty Beam with tie-bar and shelf support HD Heavy Duty Beam with tie-bar and shelf support
36 in.
48 in.
60 in.
500 1200 1800 2000
400 950 1500 1400 1900
250 700 1200 1000 1700
NORTH AMERICAN STEEL 72 in. 480 900 800 1500
Calculation based on: 1 Tie-Bar and 1 Shelf-Support for 36, 48, & 60” beams. 2 Tie-Bars and 2 Shelf-Support for 66, 72, & 96” Beams. Safety Factor: 1.66
96 in.
450 900*
With 50 Years
300 Hopkins Street, Whitby, Ontario Canada L1N 2B9 Phone: (905) 668-3300 Toll Free: (800) 735-4153 Email:
[email protected] Fax: (905) 668-5477 Web: www.naseco.ca
Manufacturing Experience NORTH AMERICAN STEEL is the leading name for Innovative Storage Ideas
NORTH AMERICAN STORAGE 2103 - 7 th Street, Nisku, Alberta Canada T9E 7Y3 Phone: (780) 955-2444 Toll Free: (800) 241-8968 Email:
[email protected] Fax: (780) 955-3463 Web: www.naseco.ca
The ideal open-t ype long span shelving system Four basic inter-locking components only
E A SYU P 7000 S H E LV I N G SYSTE M S STO R A G E SYSTE M S MEZZANINE SYSTEMS
NORTH AMERICAN STEEL
EASYUP 7000 can easily be extended to provide multiple storage levels where ceiling heights permit. Economical method to add storage without adding floor space by either: extending your existing (or new) shelving by installing a Catwalk System to reach the upper level; or placing complete Mezzanine floor over your existing (or new) shelving, using the upper floor for storage. Stairs, and rail, drop zones, safety gates and conveyors are available for maximum efficiency.
Kwikerect Steel Shelving
EASY-UP 7000 SHELVING SYSTEMS
AUTOMOTIVE STORAGE EASYUP 7000 specialty units have been designed for automotive storage:
Tire Racks:
15”d x 72”w units for tire storage.
Muffler Racks:
Open shelf unit with wire mesh top shelf for muffler storage.
Pallet Racking Systems
Fender & Trim Racks: Open unit with back supports for vertical storage. Bulk Storage:
Accessible from all sides to depth of 48” x 96”. Back to Back units allow storage up to 48” x 96”.
Small Parts:
Plastic, cardboard or steel bins, plus full extension drawer inserts are available.
AUTHORIZE D DISTRI BUTOR:
Display & Convenience: Add peg board to end of rows for hanging belts, gaskets etc.
Clothes Lockers HIGH RISE SYSTEMS EASYUP 7000 heavy duty double post end frames, rigid cross members and double hooking beams provide storage units up to 40 feet in height. Cross aisle supports are provided to prevent tipping and add rigidity. Open access to all shelves allow easy picking by entry guided wire or rail picker trucks.
MAXIMUM EVENLY DISTRIBUTED STATIC LOAD PER PAIR OF BEAMS BEAM STYLE LD V-Shaped Beam MD Medium Duty Beam with tie-bar and shelf support HD Heavy Duty Beam with tie-bar and shelf support
36 in.
48 in.
60 in.
500 1200 1800 2000
400 950 1500 1400 1900
250 700 1200 1000 1700
NORTH AMERICAN STEEL 72 in. 480 900 800 1500
Calculation based on: 1 Tie-Bar and 1 Shelf-Support for 36, 48, & 60” beams. 2 Tie-Bars and 2 Shelf-Support for 66, 72, & 96” Beams. Safety Factor: 1.66
96 in.
450 900*
With 50 Years
300 Hopkins Street, Whitby, Ontario Canada L1N 2B9 Phone: (905) 668-3300 Toll Free: (800) 735-4153 Email:
[email protected] Fax: (905) 668-5477 Web: www.naseco.ca
Manufacturing Experience NORTH AMERICAN STEEL is the leading name for Innovative Storage Ideas
NORTH AMERICAN STORAGE 2103 - 7 th Street, Nisku, Alberta Canada T9E 7Y3 Phone: (780) 955-2444 Toll Free: (800) 241-8968 Email:
[email protected] Fax: (780) 955-3463 Web: www.naseco.ca
The ideal open-t ype long span shelving system Four basic inter-locking components only
E A SYU P 7000 S H E LV I N G SYSTE M S
E A SYU P 7000 S H E LV I N G SYSTE M S
E A SYU P 7000 S H E LV I N G SYSTE M S
STO R A G E SYSTE M S
C O M P O N E NT S
C O M P O N E NT S
LONG SPAN SHELVING (BULK STORAGE)
P CM LD MD HD MSS HSS TB SB SH WMS PB DI
EASYUP 7000 is the ideal universal shelving system designed for hand loading of large size or heavy merchandise. It features open accessibility from all sides as no cross bracing is required.
Shelf Size Range:
From12” x 36” to 48” x 96” Capability of 96” x 96” with back to back units.
Beam Variety:
Selection from the most economical beam to 2000 lbs. load capacity per level.
ARCHIVE STORAGE
-
Common Post Cross Member Light Duty Beam Medium Duty Beam Heavy Duty Beam Shelf Support for MD Beam Shelf Support for HD Beam Tie Bar Shelf Bar Steel Shelf Wire Mesh Shelf Particle Board Shelf Drawer Insert
EASYUP 7000 Shelving Systems provide most economical storage of Banker Boxes (letter and legal size) Tapes, X-Rays, and Medical Records. Beam sizes and capacity have been specifically developed for maximum storage utilization.
Application:
Store boxes single height and depth.
Further Space Savings:
Store boxes double high and double deep.
High Rise:
Heavy Duty end frames allow for Mezzanines and High Rise Picker Systems.
Access:
From all sides and back to back units.
A D VA N C E D F E ATU R E S
STANDARD BANKER BOX UNITS SHELF SIZE (in) 15” x 66” 30” x 66”
CONFIGURATION
NO. OF BOXES
SHELF CENTRES
1 deep/2 high 2 deep/2 high
10 20
24” 24”
* Capacities based on 35 lbs. per box
THE NEW GENERATION OF SHELVING
FOUR MAIN COMPONENTS
•
Common Posts:
•
Accessibility from all sides since no “X” braces required.
•
Common Posts reduce cost for Add-On Units.
Box Size 13”w x 15”3/4”d x 101/4”h
GARMENT AND RETAIL BULK STORAGE EASYUP 7000 garment and display racks allow garment rods and storage shelves to be integrated into any unit.
Installation:
Rods either fixed permanently at specific heights or boltless for quick adjustability.
High Capacity Rods: Available for heavy garments; lengths up to 72”.
Registry Storage Art and Artifacts Storage Rolling Stock and Carts Drug and Food Storage Fabric and Garment Storage Display Storage Tool Storage
Are 12 gauge, one piece impact resistant and squared for strength with rounded corners for safety. Posts are slotted on 2” centres for Beams and have holes on 6” centres for back to back bolting, wall anchoring or for aid in Beam positioning. For High-Rise Systems or 3 Tier Mezzanines, Posts can be doubled up at lower levels for increased load capacities.
Cross Members:
MEDIUM DUTY BEAMS: MD 36, 42, 48, 60, 66, 72
HEAVY DUTY BEAMS: HD 48, 60, 66, 72, 96
Double locking clip. 90° return bend to support the shelf. 2” front face.
Double locking clip. 90° return bend to support the shelf. 2 1/2” face front.
SHELF SUPPORTS FOR MD BEAMS: MSS 18, 24, 30, 32, 36, 48
SHELF SUPPORTS FOR HD BEAMS: HSS 24, 30, 36, 48
Designed to support shelves at any point locking into upper lip of beam.
Shelf Supports lock into the upper lip of a pair of beams.
CROSS MEMBERS:
SHELF BARS: SB 18, 24, 30, 32, 36, 48
POSTS:
Cross Member and posts form a rigid end frame. Cross Members are designed with a patented locking tab to be turned into the post for safety and rigidity.
Shelf Bars rest on upper edge of beam, retained between posts and shelves.
Slots on 2” centres, covering 3 sides. Half slot on top for flush mounted top shelf.
POST SPLICERS:
STEEL SHELVES (full size, painted): SH All standard sizes up to 24” x 48”
PARTICLE BOARD SHELVES:
Single locking clip. V-type design to support shelf. 1 1/4” front face.
TIE BARS: TB 18, 24, 30, 32, 36, 48 Clip into the bottom lip of a pair of beams, preventing beams from “bowing out” under load.
Steel splice (2 per joint) are used to extend height of post. Splicers are designed to force-fit into the hollow sections of the post.
5/8” Industrial Grade 45 lb. test particle board is an ideal economical storage shelf in conjunction with EASYUP beams. In layouts all shelves are actual size.
•
Shelves can be easily re-adjusted after being installed.
•
Back to back installation without gap and tight against a wall.
•
Post and Cross Members lock together in both planes to form a rigid end frame with high load capacities.
•
Knocked down type end frames allow for height, capacity and depth adjustability at any time.
Shelves:
SAFETY CLIPS:
AISLE SUPPORT CLIPS:
FOOT PLATES:
Are re-inforceable with Shelf Support and Tie Bars.
•
Diverse accessories allow for expansion without using more floor space.
Particle Board Shelves offer strength with economy.
Used to attached catwalk support (slotted angle) to Posts. Straight or 90° Angle
•
EASYUP is shipped knocked down to reducing freight costs.
Spring clip locks Beam into the post slots for safety. Can be removed easily. Recommended for uneven floors and for mezzanine applications on bottom & top beams of lower units.
Foot plates clip into tube section of post to disperse weight on tile or wood floors, etc. Foot plates are punched for lagging to floor, if required.
CUSTOMIZED STORAGE SYSTEMS AVAILABLE: Mobile Storage Systems Medical Record Storage Radiology Storage Tape, Cassette and Reel Storage Hanging Storage Firearms and Evidence Storage Map Storage
Complete boltless and clipless for quickest assembly.
LIGHT DUTY BEAMS: LD 36, 42, 48, 60
Are “Z” shaped, with a patented Safety Locking Tab which can be unlocked again to interchange sizes and adjust depths.
Beams:
Front and back edges are channel formed and drop over front & back beams providing extra strength (beam plus shelf capacity).
Double-Hook Beams on top and bottom provide complete lateral rigidity without the interference and cost of braces. Three types of Beams are available from single to double hooking heavy duty Beams, to match shelf load requirements with minimum Beam size.
Wire Mesh Shelves allow passage of air, light and water and will not retain dust or debris.
E A SYU P 7000 S H E LV I N G SYSTE M S
E A SYU P 7000 S H E LV I N G SYSTE M S
E A SYU P 7000 S H E LV I N G SYSTE M S
STO R A G E SYSTE M S
C O M P O N E NT S
C O M P O N E NT S
LONG SPAN SHELVING (BULK STORAGE)
P CM LD MD HD MSS HSS TB SB SH WMS PB DI
EASYUP 7000 is the ideal universal shelving system designed for hand loading of large size or heavy merchandise. It features open accessibility from all sides as no cross bracing is required.
Shelf Size Range:
From12” x 36” to 48” x 96” Capability of 96” x 96” with back to back units.
Beam Variety:
Selection from the most economical beam to 2000 lbs. load capacity per level.
ARCHIVE STORAGE
-
Common Post Cross Member Light Duty Beam Medium Duty Beam Heavy Duty Beam Shelf Support for MD Beam Shelf Support for HD Beam Tie Bar Shelf Bar Steel Shelf Wire Mesh Shelf Particle Board Shelf Drawer Insert
EASYUP 7000 Shelving Systems provide most economical storage of Banker Boxes (letter and legal size) Tapes, X-Rays, and Medical Records. Beam sizes and capacity have been specifically developed for maximum storage utilization.
Application:
Store boxes single height and depth.
Further Space Savings:
Store boxes double high and double deep.
High Rise:
Heavy Duty end frames allow for Mezzanines and High Rise Picker Systems.
Access:
From all sides and back to back units.
A D VA N C E D F E ATU R E S
STANDARD BANKER BOX UNITS SHELF SIZE (in) 15” x 66” 30” x 66”
CONFIGURATION
NO. OF BOXES
SHELF CENTRES
1 deep/2 high 2 deep/2 high
10 20
24” 24”
* Capacities based on 35 lbs. per box
THE NEW GENERATION OF SHELVING
FOUR MAIN COMPONENTS
•
Common Posts:
•
Accessibility from all sides since no “X” braces required.
•
Common Posts reduce cost for Add-On Units.
Box Size 13”w x 15”3/4”d x 101/4”h
GARMENT AND RETAIL BULK STORAGE EASYUP 7000 garment and display racks allow garment rods and storage shelves to be integrated into any unit.
Installation:
Rods either fixed permanently at specific heights or boltless for quick adjustability.
High Capacity Rods: Available for heavy garments; lengths up to 72”.
Registry Storage Art and Artifacts Storage Rolling Stock and Carts Drug and Food Storage Fabric and Garment Storage Display Storage Tool Storage
Are 12 gauge, one piece impact resistant and squared for strength with rounded corners for safety. Posts are slotted on 2” centres for Beams and have holes on 6” centres for back to back bolting, wall anchoring or for aid in Beam positioning. For High-Rise Systems or 3 Tier Mezzanines, Posts can be doubled up at lower levels for increased load capacities.
Cross Members:
MEDIUM DUTY BEAMS: MD 36, 42, 48, 60, 66, 72
HEAVY DUTY BEAMS: HD 48, 60, 66, 72, 96
Double locking clip. 90° return bend to support the shelf. 2” front face.
Double locking clip. 90° return bend to support the shelf. 2 1/2” face front.
SHELF SUPPORTS FOR MD BEAMS: MSS 18, 24, 30, 32, 36, 48
SHELF SUPPORTS FOR HD BEAMS: HSS 24, 30, 36, 48
Designed to support shelves at any point locking into upper lip of beam.
Shelf Supports lock into the upper lip of a pair of beams.
CROSS MEMBERS:
SHELF BARS: SB 18, 24, 30, 32, 36, 48
POSTS:
Cross Member and posts form a rigid end frame. Cross Members are designed with a patented locking tab to be turned into the post for safety and rigidity.
Shelf Bars rest on upper edge of beam, retained between posts and shelves.
Slots on 2” centres, covering 3 sides. Half slot on top for flush mounted top shelf.
POST SPLICERS:
STEEL SHELVES (full size, painted): SH All standard sizes up to 24” x 48”
PARTICLE BOARD SHELVES:
Single locking clip. V-type design to support shelf. 1 1/4” front face.
TIE BARS: TB 18, 24, 30, 32, 36, 48 Clip into the bottom lip of a pair of beams, preventing beams from “bowing out” under load.
Steel splice (2 per joint) are used to extend height of post. Splicers are designed to force-fit into the hollow sections of the post.
5/8” Industrial Grade 45 lb. test particle board is an ideal economical storage shelf in conjunction with EASYUP beams. In layouts all shelves are actual size.
•
Shelves can be easily re-adjusted after being installed.
•
Back to back installation without gap and tight against a wall.
•
Post and Cross Members lock together in both planes to form a rigid end frame with high load capacities.
•
Knocked down type end frames allow for height, capacity and depth adjustability at any time.
Shelves:
SAFETY CLIPS:
AISLE SUPPORT CLIPS:
FOOT PLATES:
Are re-inforceable with Shelf Support and Tie Bars.
•
Diverse accessories allow for expansion without using more floor space.
Particle Board Shelves offer strength with economy.
Used to attached catwalk support (slotted angle) to Posts. Straight or 90° Angle
•
EASYUP is shipped knocked down to reducing freight costs.
Spring clip locks Beam into the post slots for safety. Can be removed easily. Recommended for uneven floors and for mezzanine applications on bottom & top beams of lower units.
Foot plates clip into tube section of post to disperse weight on tile or wood floors, etc. Foot plates are punched for lagging to floor, if required.
CUSTOMIZED STORAGE SYSTEMS AVAILABLE: Mobile Storage Systems Medical Record Storage Radiology Storage Tape, Cassette and Reel Storage Hanging Storage Firearms and Evidence Storage Map Storage
Complete boltless and clipless for quickest assembly.
LIGHT DUTY BEAMS: LD 36, 42, 48, 60
Are “Z” shaped, with a patented Safety Locking Tab which can be unlocked again to interchange sizes and adjust depths.
Beams:
Front and back edges are channel formed and drop over front & back beams providing extra strength (beam plus shelf capacity).
Double-Hook Beams on top and bottom provide complete lateral rigidity without the interference and cost of braces. Three types of Beams are available from single to double hooking heavy duty Beams, to match shelf load requirements with minimum Beam size.
Wire Mesh Shelves allow passage of air, light and water and will not retain dust or debris.
E A SYU P 7000 S H E LV I N G SYSTE M S
E A SYU P 7000 S H E LV I N G SYSTE M S
E A SYU P 7000 S H E LV I N G SYSTE M S
STO R A G E SYSTE M S
C O M P O N E NT S
C O M P O N E NT S
LONG SPAN SHELVING (BULK STORAGE)
P CM LD MD HD MSS HSS TB SB SH WMS PB DI
EASYUP 7000 is the ideal universal shelving system designed for hand loading of large size or heavy merchandise. It features open accessibility from all sides as no cross bracing is required.
Shelf Size Range:
From12” x 36” to 48” x 96” Capability of 96” x 96” with back to back units.
Beam Variety:
Selection from the most economical beam to 2000 lbs. load capacity per level.
ARCHIVE STORAGE
-
Common Post Cross Member Light Duty Beam Medium Duty Beam Heavy Duty Beam Shelf Support for MD Beam Shelf Support for HD Beam Tie Bar Shelf Bar Steel Shelf Wire Mesh Shelf Particle Board Shelf Drawer Insert
EASYUP 7000 Shelving Systems provide most economical storage of Banker Boxes (letter and legal size) Tapes, X-Rays, and Medical Records. Beam sizes and capacity have been specifically developed for maximum storage utilization.
Application:
Store boxes single height and depth.
Further Space Savings:
Store boxes double high and double deep.
High Rise:
Heavy Duty end frames allow for Mezzanines and High Rise Picker Systems.
Access:
From all sides and back to back units.
A D VA N C E D F E ATU R E S
STANDARD BANKER BOX UNITS SHELF SIZE (in) 15” x 66” 30” x 66”
CONFIGURATION
NO. OF BOXES
SHELF CENTRES
1 deep/2 high 2 deep/2 high
10 20
24” 24”
* Capacities based on 35 lbs. per box
THE NEW GENERATION OF SHELVING
FOUR MAIN COMPONENTS
•
Common Posts:
•
Accessibility from all sides since no “X” braces required.
•
Common Posts reduce cost for Add-On Units.
Box Size 13”w x 15”3/4”d x 101/4”h
GARMENT AND RETAIL BULK STORAGE EASYUP 7000 garment and display racks allow garment rods and storage shelves to be integrated into any unit.
Installation:
Rods either fixed permanently at specific heights or boltless for quick adjustability.
High Capacity Rods: Available for heavy garments; lengths up to 72”.
Registry Storage Art and Artifacts Storage Rolling Stock and Carts Drug and Food Storage Fabric and Garment Storage Display Storage Tool Storage
Are 12 gauge, one piece impact resistant and squared for strength with rounded corners for safety. Posts are slotted on 2” centres for Beams and have holes on 6” centres for back to back bolting, wall anchoring or for aid in Beam positioning. For High-Rise Systems or 3 Tier Mezzanines, Posts can be doubled up at lower levels for increased load capacities.
Cross Members:
MEDIUM DUTY BEAMS: MD 36, 42, 48, 60, 66, 72
HEAVY DUTY BEAMS: HD 48, 60, 66, 72, 96
Double locking clip. 90° return bend to support the shelf. 2” front face.
Double locking clip. 90° return bend to support the shelf. 2 1/2” face front.
SHELF SUPPORTS FOR MD BEAMS: MSS 18, 24, 30, 32, 36, 48
SHELF SUPPORTS FOR HD BEAMS: HSS 24, 30, 36, 48
Designed to support shelves at any point locking into upper lip of beam.
Shelf Supports lock into the upper lip of a pair of beams.
CROSS MEMBERS:
SHELF BARS: SB 18, 24, 30, 32, 36, 48
POSTS:
Cross Member and posts form a rigid end frame. Cross Members are designed with a patented locking tab to be turned into the post for safety and rigidity.
Shelf Bars rest on upper edge of beam, retained between posts and shelves.
Slots on 2” centres, covering 3 sides. Half slot on top for flush mounted top shelf.
POST SPLICERS:
STEEL SHELVES (full size, painted): SH All standard sizes up to 24” x 48”
PARTICLE BOARD SHELVES:
Single locking clip. V-type design to support shelf. 1 1/4” front face.
TIE BARS: TB 18, 24, 30, 32, 36, 48 Clip into the bottom lip of a pair of beams, preventing beams from “bowing out” under load.
Steel splice (2 per joint) are used to extend height of post. Splicers are designed to force-fit into the hollow sections of the post.
5/8” Industrial Grade 45 lb. test particle board is an ideal economical storage shelf in conjunction with EASYUP beams. In layouts all shelves are actual size.
•
Shelves can be easily re-adjusted after being installed.
•
Back to back installation without gap and tight against a wall.
•
Post and Cross Members lock together in both planes to form a rigid end frame with high load capacities.
•
Knocked down type end frames allow for height, capacity and depth adjustability at any time.
Shelves:
SAFETY CLIPS:
AISLE SUPPORT CLIPS:
FOOT PLATES:
Are re-inforceable with Shelf Support and Tie Bars.
•
Diverse accessories allow for expansion without using more floor space.
Particle Board Shelves offer strength with economy.
Used to attached catwalk support (slotted angle) to Posts. Straight or 90° Angle
•
EASYUP is shipped knocked down to reducing freight costs.
Spring clip locks Beam into the post slots for safety. Can be removed easily. Recommended for uneven floors and for mezzanine applications on bottom & top beams of lower units.
Foot plates clip into tube section of post to disperse weight on tile or wood floors, etc. Foot plates are punched for lagging to floor, if required.
CUSTOMIZED STORAGE SYSTEMS AVAILABLE: Mobile Storage Systems Medical Record Storage Radiology Storage Tape, Cassette and Reel Storage Hanging Storage Firearms and Evidence Storage Map Storage
Complete boltless and clipless for quickest assembly.
LIGHT DUTY BEAMS: LD 36, 42, 48, 60
Are “Z” shaped, with a patented Safety Locking Tab which can be unlocked again to interchange sizes and adjust depths.
Beams:
Front and back edges are channel formed and drop over front & back beams providing extra strength (beam plus shelf capacity).
Double-Hook Beams on top and bottom provide complete lateral rigidity without the interference and cost of braces. Three types of Beams are available from single to double hooking heavy duty Beams, to match shelf load requirements with minimum Beam size.
Wire Mesh Shelves allow passage of air, light and water and will not retain dust or debris.
E A SYU P 7000 S H E LV I N G SYSTE M S STO R A G E SYSTE M S MEZZANINE SYSTEMS
NORTH AMERICAN STEEL
EASYUP 7000 can easily be extended to provide multiple storage levels where ceiling heights permit. Economical method to add storage without adding floor space by either: extending your existing (or new) shelving by installing a Catwalk System to reach the upper level; or placing complete Mezzanine floor over your existing (or new) shelving, using the upper floor for storage. Stairs, and rail, drop zones, safety gates and conveyors are available for maximum efficiency.
Kwikerect Steel Shelving
EASY-UP 7000 SHELVING SYSTEMS
AUTOMOTIVE STORAGE EASYUP 7000 specialty units have been designed for automotive storage:
Tire Racks:
15”d x 72”w units for tire storage.
Muffler Racks:
Open shelf unit with wire mesh top shelf for muffler storage.
Pallet Racking Systems
Fender & Trim Racks: Open unit with back supports for vertical storage. Bulk Storage:
Accessible from all sides to depth of 48” x 96”. Back to Back units allow storage up to 48” x 96”.
Small Parts:
Plastic, cardboard or steel bins, plus full extension drawer inserts are available.
AUTHORIZE D DISTRI BUTOR:
Display & Convenience: Add peg board to end of rows for hanging belts, gaskets etc.
Clothes Lockers HIGH RISE SYSTEMS EASYUP 7000 heavy duty double post end frames, rigid cross members and double hooking beams provide storage units up to 40 feet in height. Cross aisle supports are provided to prevent tipping and add rigidity. Open access to all shelves allow easy picking by entry guided wire or rail picker trucks.
MAXIMUM EVENLY DISTRIBUTED STATIC LOAD PER PAIR OF BEAMS BEAM STYLE LD V-Shaped Beam MD Medium Duty Beam with tie-bar and shelf support HD Heavy Duty Beam with tie-bar and shelf support
36 in.
48 in.
60 in.
500 1200 1800 2000
400 950 1500 1400 1900
250 700 1200 1000 1700
NORTH AMERICAN STEEL 72 in. 480 900 800 1500
Calculation based on: 1 Tie-Bar and 1 Shelf-Support for 36, 48, & 60” beams. 2 Tie-Bars and 2 Shelf-Support for 66, 72, & 96” Beams. Safety Factor: 1.66
96 in.
450 900*
With 50 Years
300 Hopkins Street, Whitby, Ontario Canada L1N 2B9 Phone: (905) 668-3300 Toll Free: (800) 735-4153 Email:
[email protected] Fax: (905) 668-5477 Web: www.naseco.ca
Manufacturing Experience NORTH AMERICAN STEEL is the leading name for Innovative Storage Ideas
NORTH AMERICAN STORAGE 2103 - 7 th Street, Nisku, Alberta Canada T9E 7Y3 Phone: (780) 955-2444 Toll Free: (800) 241-8968 Email:
[email protected] Fax: (780) 955-3463 Web: www.naseco.ca
The ideal open-t ype long span shelving system Four basic inter-locking components only
