Durable Antistatic additives I Surface treatment I Antistatic Equipment I Surface tension
The specialist in antistatic materials and surface tension
Antistatic Additives These are internal static treatments. The additives are added when producing the materials in order to obtain permanent antistatic properties. ■■
■■
■■
Durable Antistatic additives
Antistatic additives are used in plastics to obtain
by absorbing moisture from the air. The molecules comprise both hydrophilic and hydrophobic compounds. The hydrophilic compounds absorb water molecules from the air causing the material to become conductive.
Antistatic liquid
permanent
antistatic properties. Their role is to make the material conductive
PP, Polypropylene (FILM, INJECTION) STATICONTROL® AS 11: Internal processing of PP ( PP granules). Quality of treatment: 1010/11 ohms/cm (at 50% RH/20° C), suitable for food. Duration: several years in the absence of friction and depending on the dosage. 100% active granules. LDPE FILMS STATICONTROL® AS 15: Internal treatment of LDPE ( low density polyethylene). Quality of treatment: 1010/11 ohms/cm (at 50% RH/20° C), suitable for food. Duration: several years in the absence of friction and depending on the dosage. polypropylene STATICONTROL® MSG STAT 190: Internal processing of PP. Quality of treatment: 1011 ohms/cm (at 50% RH/20° C), suitable for food. Duration: several months less durable but more economical than AS 11.
Unlike the antistatic additives, liquids are sprayed on the surface of the material. The effect varies depending on the materials and type of liquid used. ■■
■■
PLEXIGLAS STATICONTROL ® AS90E10 Antistatic agent is applied on the surface of plexiglass. Quality of treatment: 1010 ohm/cm (at 50% RH/20° C), suitable for food. polystyrene and PVC STATICONTROL ® AS77E10 Quality of treatment: 1015 – 109 to see 108 ohms/cm. This prevents all static charges (applications: electronics, dustfree, ...). Measuring of static charges is important for the purposes of investigation of static problems.
Corona treatment An electrode connected to a high frequency generator and high AC voltage, emits an electric field in the form of corona. This changes physically and chemically the material (adhesion of inks, glues, ...). Mini-corona Corona treatment for laboratory and small series. ■■ with 3 electrodes ■■ frequency: 4-5 MHz ■■ voltage: 10-48 kV Industrial Equipment Our customized CORONA stations. ■■ From a few centimeters to several meters. ■■ All types of dielectric cylinders (covered with silicone or silicone sleeves, rectified or not, ceramics). ■■ All electrodes (multileaf, U adjustable aluminum segments and stainless steel, ceramic electrodes).
Surface treatment
Specifications Depending on your application, the product being treated, your width and speed of treatment, we can offer the right system.
vacuum Plasma treatment / nanocoating Plasma treatment is the most elaborated process. This is an activation that takes place in a vacuum environment. For simplicity, it is a “corona” under vacuum with an ionizing gas (choice depending on the properties required). The ionized gas enters the surfaces of the material to be processed.
Operation ■■ Increased surface tension: hydrophilic: better adhesion of glues and paint. ■■ Decrease surface tension: super hydrophobic or oleophobic: to make materials waterproof (nanocoating). ■■ Ultrafine cleaning of materials. Applications ■■ Etching of silicone ... ■■ Cleaning of contaminated parts. ■■ Plasma activation of plastic (printing, glueing). ■■ Film deposition. Water and oil repellent nanocoating.
Segmented Stainless Steel Electrodes => interrupt processing. Electrodes multileaf. => regular treatment in the transverse direction with high quality. Ceramic electrodes. => any treatment support (conductive or not).
IONSTORM most powerful BAR on the market! Advanced pulsed DC ionization to neutralize static electricity over long distances without blower or air assistance (up to 1500 mm). ■■
■■
■■
■■
■■
■■
Produces positive and negative ions from specialized emitters. The amount of ions attracted by the object is based on the size of the load. Powered by a generator ionstrom 3700. The power is fully adjustable and can be fixed on specific settings. Bar up to 3 m long can be connected in series (up to 10 m long). The Boussey Control bars are ‘shockproof’.
The HP version works in the same way but is optimized for distances between
Antistatic Equipment
200 and 750 mm.
Neutralization on short distance
Neutralization on long distance
Dust gun
High voltage generator (Power Supply Unit)
To neutralize plastic film, paper, textile at distances up to 150 mm.
For applications at distances up to 1500 mm.
Removes dust and other contaminants.
The generator provides the energy needed to operate the electrostatic charge emitters.
Inductive discharge
Hazardous Area Products
Static electricity generator
Measuring instruments
Effective and efficient solution, easy to install and requires little maintenance.
Certified for ATEX zone.
The power of static electricity (charge) can be used to obtain a temporary adhesion in many applications.
Measuring of static charges is important with the purpose of investigation on static problems.
Product Range ■■ ■■ ■■ ■■ ■■ ■■
■■ ■■ ■■
Jumbo pen: pen 45 ml Jumbo kit: includes 6 pens 45 ml 100 ml bottle: 100 ml bottle 50 ml bottle kit: includes 8 x 50 ml 100 ml bottle kit: includes 6 x 100 ml Surface test kit: includes 6 bottles x 100 ml, 6 empty Jumbo pens and a pair of gloves. Empty pens and pads available. Box: 8 bottles x 50 ml Box: 16 bottles x 50 ml
All of our pads on Jumbo pens can be changed in order to avoid contamination of the ink. All bottles and pencil kits listed above, can be delivered in any desired combination of levels dyne/cm.
surface tension
Non-toxic conform the ASTM D-2578 norm. Eco: green ink - 28-58 dynes/cm (mN/m) ECO: red ink - 59-71 dynes/cm (mN/m) Toxic conform the ASTM D-2578 norm. NOT-ECO: blue ink - 38-58 dynes/cm (mN/m) Our range of inks is delivered with Material Safety Data Sheets. They are labeled in accordance with EU regulations for health and safety.
Also available: Quicktest pens: 38-40-42-44 dynes/cm
Meersbloem - Melden 46 9700 Oudenaarde, Belgium tel. +32 (0) 55 61 21 13 fax +32 (0) 55 61 21 01
tel. +33 (0) 3 28 33 28 24 fax +33 (0) 3 28 33 28 36
[email protected] www.boussey-control.com
your agent: