Curve™ ceiling-mounted single/dual display Technical Specifications Curve™ ceiling-mounted single/dual display Navigation Station* Ceiling-mounted high performance Image-Guided-Surgery navigation station combining the latest computer technology and superior OR efficiency. Direct mounting of the displays and camera, featuring advanced optical wireless passive marker tracking technology, to the OR ceiling enables greatly improved setup flexibility and ergonomics while optimizing OR space usage

  

   

      

 

„‟Zero OR footprint” concept provided through ceiling-mounted cameras and touch displays Sterile surgical control accessible via two large 26" widescreen touch displays Brilliant display quality with resolutions beyond full HD (1920x1200pixels per display). Image quality entirely preserved, no visualization limitations from the touch interface (surface acoustic wave technology) Motorized joints for remote-controlled camera alignment yields new degrees of freedom in terms of setup flexibility Infrared tracking cameras with extended detection volume and laser pointer for quick and intuitive positioning Central "Home Button" ensures intuitive system control Connection Unit for connectivity e.g. with surgical microscopes, fluoroscopes, endoscopes, ultrasound etc via state-of-the-art digital and analog video inputs supporting up to full HD resolution: 1x SDI 1080i (In), 1x S-Video (In), 1x CVBS (Composite) (In), USB(B) for microscope, DVI-I Fast simultaneous access to e.g. PACS/hospital network and integration with e.g. C-Arms via 2x high-speed network connection (up to 1 Gbit/s each) High-performance medical computer unit (Quad-core Server Processor Intel Xeon 3530 2.8 GHz Central Processor Unit), 6 GB RAM memory and 320 GB storage) Computer Unit and Connection Unit can be placed in and outside the OR (within 50 m connected via fiber optic cable) Direct patient data transfer from/to 4x USB and CD/DVD ± RW Easy cleansing and hygienic disinfection VESA 100 display interface for customized adaptation to existing ceiling booms Defined camera interface for customized adaptation to existing ceiling booms

IMPORTANT: CEILING ARMS are not included in this article but can be purchased through Brainlab IMPORTANT: If CEILING ARMS are not purchased from Brainlab, then customer needs to supply compatible ceiling arm system. This must meet the Brainlab specifications as defined in

© 2011 Brainlab · PLF-TS-E-Curve CM-Navigation-Station (Rev.2)

TECHNICAL REQUIREMENT SHEET FOR CURVE CEILING ARMS. Installation of CURVE CEILING-MOUNTED DUAL DISPLAY requires the TECHNICAL REQUIREMENT SHEET FOR CURVE CEILING ARMS, signed by supplier of CEILING ARMS. Brainlab reserves the right of refusing installation in case of unforeseen incompatibilities. * For further technical information please contact Brainlab‟s Integrated OR Services division: [email protected] (United States), and [email protected] (non-US

*The specifications of these items may change due to technical development **® only for US. Outside US without ®. Curve™ is a trademark of Brainlab AG, registration pending.

MAIN FEATURE DIFFERENTIATION Curve ceiling-mounted dual display Amount of displays Camera alignment Server rack outside OR needed Device Connection Panel in-wall needed

2x 26'' touch displays motorized no no

Curve ceiling-mounted single display 1x 26'' touch display manual no no

TECHNICAL DATA rd

Certificates & Standards

IEC 60601- 1 (3 edition)

Electrical Standard Approval by EN 60601-1 (IEC 60601-1) by IEC 529

Protection Level I, Type B IPX0

ENVIROMENTAL REQUIREMENTS - STORAGE Temperature

-10° C (14°F) to +50° C (122°F)

Humidity

Humidity: 10% to 90% non-condensing

Pressure

Pressure: 500hPA to 1060hPa

ENVIROMENTAL REQUIREMENTS – OR

© 2011 Brainlab · PLF-TS-E-Curve CM-Navigation-Station (Rev.2)

Temperature

10° C (50°F) to +35° C (95°F)

Humidity

Humidity: 30% to 75% non-condensing

Pressure

Pressure: 700hPA to 1060hPa

COMPUTER UNIT – TECHNICAL SPECIFICATIONS      

Quad-core Server Processor on customized „industrial“ mainboard Framegrabber Card:Matrox, VIO Primary GFX:Nvidia, Quadro FX1800 Secondary GFX:Nvidia, Quadro FX380 DVD:DVD±RW (±R DL) DVD RAM 8x/8x/5x slimdrive Positioning: Outside OR (e.g. technical room in 19” rack)

Power Consumption

Max 650 W

Voltage/Frequency range

100V – 240 VAC+-10% at 50 or 60 Hz

Processor

Intel, Xeon W3530 2,8 GHz

Dimensions (h x w x d)

17cm x 44cm x 50cm (6,69” x 17,32” x 19,68”)

Memory

6 GB RAM

I/O Support

FRONT SIDE: 

1x mains power hard switch



2x USB 2.0 (inside - for service use only)

BACK SIDE: 

1x LAN 1Gbit



4x USB 2.0 (for 3rd party integr.)



2x DVI-D (for ext.routing systems)



3x fiber optics to Connection Unit



1x fiber optics for each touch display



1x mains power plug C14



1x potential equalization plug

Heat Emission

Max 450W

Storage

HDD: Hitachi, 320 GB

Software

Windows 7 64-bit (Embedded Standard)

© 2011 Brainlab · PLF-TS-E-Curve CM-Navigation-Station (Rev.2)

CONNECTION UNIT – TECHNICAL SPECIFICATIONS   

On/Off switch for Curve ceiling-mounted Interfaces for connecting external devices powering components inside the OR (displays, camera, motorized camera joint) Positioning: On ceiling supply unit (recommended), or on shelf/wall within OR

Power Consumption

Max 650 W

Voltage/Frequency range

100V – 240 VAC+-10% at 50or 60 Hz

Dimensions (h x w x d)

10cm x 38cm x 38cm (3,93” x 14,96” x14,96”)

I/O Support

FRONT SIDE:     

4x USB 2.0 1x intraoperative LAN 100 Mbit 1x SDI 1080i (In) 1x S-Video (In) 1x CVBS (Composite) (In)

 

USB(B) for microscope DVI-I



IEEE 802.11n, b, g (supporting 2.4 and 5 GHz up to 150Mbit/s)

BACK SIDE: 

Heat Emission



power connectors for displays (2x) and camera(1x) 4x fiber optic connectors: 1 for the camera 3 to Computer Unit

  

1x mains power plug C14 1x potential equalization plug 1x mains power hard switch

Max 250W

TOUCHSCREEN DISPLAY – TECHNICAL SPECIFICATIONS    

1x or 2x 26” widescreen touch displays (1920x1200px) with beyond full HD outstanding display brilliance (surface acoustic wave touch technology) Dedicated disposable touchpens available for sterile use Affixed to highly flexible monitor arm for optimal adjustment Curve touchscreen protection cover available for safe storage

Monitor

TFT, 1920x1200px, 60 Hz (surface acoustic wave touch technology)

© 2011 Brainlab · PLF-TS-E-Curve CM-Navigation-Station (Rev.2)

Physical Characteristics

Display size Height Width Depth Weight Heat Emission

26‟‟ 40,5 cm 61,5 cm 8.5 cm 8.5 kg max 90W

Resolution

1920x1200px

Electrical Specifications

Input signal, digital data

Scan Frequency

Horizontal

30-80kHz

Vertical

50-85Hz

CAMERA SYSTEM – TECHNICAL SPECIFICATIONS    

Infrared tracking cameras with extended detection volume and laser pointer for quick and intuitive positioning Detects three-dimensional position of tools equipped with reflective marker spheres Separate mobile camera stand for flexible positioning of the infrared camera Protection cover for safe transport and storage

Physical Characteristics

Height Width Depth Weight Heat Emission (incl. Motorized)

8.6 cm (3,38”) 61,3 cm (24,13”) 15.5 cm (6,1”) 3 kg ( 6,61 lb) max 20W (max.75W)

Host Interface

RS 422

Maximum Data Rate Tracking Volume

1,23 Mbps 300 cm (118,1”)

Tracking Accuracy

0.3 mm RMS (Root Mean Square)

© 2011 Brainlab · PLF-TS-E-Curve CM-Navigation-Station (Rev.2)