221D Articulated Wheel Loader ENGINE

DRIVETRAIN

HYDRAULICS

Model ........................... Perkins 704-30 Type................ 4-stroke, turbocharged Cylinders ............................................. 4 Bore/Stroke .................... 3.82” x 3.94” (97 X 100 mm) Displacement .............. 183 in3 (2.96 L) Fuel injection.............................. Direct Fuel......................................... #2 Diesel Fuel filter......... Replaceable, full flow spin-on cartridge Air filter .................. Dry type element w/warning restriction indicator Radiator Core type.......................... Staggered Fan Style ......................................... Puller Diameter .................... 21” (535 mm) Water pump Style ...................................... Integral Engine oil Pump........ Deep sump plate cooler with pressurized under-piston nozzles Pump operating angle ratings Side-to-side ..................... Rated 35° Fore and aft..................... Rated 35° Oil filtration................. Replaceable, full flow spin-on cartridge Engine speeds (rpm) Rated speed, full load .............. 2500 Low idle ........................... 1020–1080 High idle, no load ........... 2220-2280 Horsepower Gross....... 62 (46.5 kW) @ 2500 rpm Net ............. 59 (44 kW) @ 2300 rpm Peak torque @ 1600 rpm Gross.................. 155 lb·ft (210 N·m) Net ..................... 148 lb·ft (200 N·m) Torque rise ................................ 17.98%

Transmission .................... Hydrostatic transmission Pump relief....... 6743 psi (46 500 kPa) Pump flow...... 36 gpm (136.7 L/min) Differential ............. Front limited slip w/45% transfer on front axles Rear axle oscillation .............. 24° total Front axle Differential ratio ........................ 3.87 Planetary ratio............................ 6.00 Final axle ratio ......................... 23.25 Planetaries............................ Outboard Service brakes .............. Hydraulically actuated, maintenance-free, multiple wet disc w/accumulator to rear axle & joint shaft Brake surface area... 210.8 in2 per hub (0.136 m2) Parking brakes.................. Mechanical Travel speeds – mph (km/h) w/223/80 R18 tires Forward Reverse Low ......... 0-3.7 (0-6) ....... 0-3.7 (0-6) High .... 0-12.4 (0-20) ... 0-12.4 (0-20)

Pump (steering/ implement) ...............Open-centered pressure/flow compensated Fixed gear type ...................................... 17.4 gpm @ 2500 rpm @ 3335 psi (66.1 L/min @ 2500 rpm @ 23 000 kPa) Loader control valve ..... Open-center, 1 lever loader control w/ forward/reverse switch, detents in float Loader auxiliary Steering ................... Hydraulic orbital center-pivot articulating w/on-demand oil flow Main relief pressure............... 3335 psi (23 000 kPa) Filtration ............................. 15-micron, full flow replaceable cartridges on return line, condition indicator light for filter

NOTE: Travel speeds at full engine throttle.

ELECTRICAL Voltage...... 24 Volts, negative ground Alternator................................. 65 amp Batteries............................... (1) 12-Volt

NOTE: Gross horsepower and torque per SAE J1995. Net horsepower and torque per SAE J1349.

221D – page 1 of 6

CYLINDERS Lift cylinder Bore diameter.......... 2.95” (75 mm) Rod diameter .......... 1.77” (45 mm) Stroke ................... 27.17” (690 mm) Dump cylinder (Z-Bar) Bore diameter.......... 3.54” (90 mm) Rod diameter .......... 1.77” (45 mm) Stroke ................... 17.72” (450 mm)

J K

E F

A

H

L

D

C B

DIMENSIONS Height to – A.Top of ROPS cab .............................................................................................................................................. 110” (2793 mm) B. Wheelbase ..................................................................................................................................................... 88.58” (2250 mm) C. Ground clearance........................................................................................................................................... 14.96” (380 mm) D.Angle of departure................................................................................................................................................................ 35° Width – Overall* w/o bucket ....................................................................................................................................... 75” (1904 mm) Centerline tread........................................................................................................................................... 60.8” (1526 mm) Turning radius* – outside ........................................................................................................................... 155.9” (3961 mm) Turning angle – From center ......................................................................................................................................................................... 41° Total angle ........................................................................................................................................................................... 82° Rear axle oscillation, total .................................................................................................................................................... 24° NOTE: *Dimensions taken with 365/80 R20 tires. Additional dimensions on pages 3 & 4.

WEIGHT ADJUSTMENTS Tipping Load Tipping Load Weight Adjustment Adjustment Select Options Adjustment Straight 40° Turn Optional counterweight ........................................................ 396 lb (180 kg) ............ 512 lb (233 kg) ............ 417 lb (190 kg) 14.5-20 ply MPT E91 Dunlop ................................................... 98 lb (44 kg) ................ 67 lb (30 kg).............. -31 lb (-14 kg) 405/70 R20 SPT9 Dunlop.......................................................... 45 lb (20 kg)................ -15 lb (-7 kg).............. -38 lb (-17 kg) NOTE: **Unit equipped with Z-Bar loader arms, 1.18 yd3 (0.9 m3) general purpose pin on bucket w/bolt-on edge, 365/80 R20 tires, ROPS cab with heater, standard counterweight, standard batteries, front and rear fenders, full fuel and 165 lb (75 kg) operator. Adjust select options from rated weight.

221D – page 2 of 6

PERFORMANCE DATA

E. F. G. H. J. K.

L.

1.3 yd3 GP (1.0 m3) 1.3 yd3 GP (1.0 m3) 21D Z-Bar Bucket w/Bolt-on Edge Bucket w/Teeth & Segments SAE bucket capacity – struck........................................................ 1.09 yd3 (0.83 m3) ................................ 1.09 yd3 (0.83 m3).................. Heaped ...................................................................................... 1.30 yd3 (1.00 m3) ................................ 1.30 yd3 (1.00 m3).................. Bucket width – outside ................................................................... 82.7” (2100 mm) ................................. 82.7” (2100 mm).................. Bucket weight ................................................................................... 1,069 lb (485 kg) .................................... 981 lb (445 kg) .................. Operating height – fully raised w/spillguard ................................ 161.1” (4091 mm) ............................... 161.1” (4091 mm).................. Hinge pin height – fully raised.................................................... 125.3” (3182 mm) ............................... 125.3” (3182 mm).................. Overall length – bucket level on ground.................................... 211.2” (5365 mm) .................................. 213” (5411 mm) .................. Dump angle – fully raised ..................................................................................... 41°......................................................... 41° ................. Dump height – fully raised, 45° dump......................................... 98.5” (2503 mm) ................................. 97.4” (2474 mm).................. Bucket reach – fully raised, 45° dump............................................ 31.0” (789 mm) ................................... 33.1” (841 mm).................. Bucket reach – 7’0” (2.13 m) height, 45° dump .......................... 41.7” (1060 mm) ................................. 42.8” (1087 mm).................. Operating load – SAE.................................................................... 3,577 lb (1622 kg) ............................... 3,618 lb (1641 kg) .................. Maximum material density – SAE ................................. 2,735 lb/yd3 (1622 kg/m3) .................. 2,766 lb/yd3 (1641 kg/m3) .................. Tipping load – SAE Straight ..................................................................................... 8,873 lb (4025 kg) ............................... 8,955 lb (4062 kg) .................. 40° turn ..................................................................................... 7,154 lb (3245 kg) ............................... 7,236 lb (3282 kg) .................. Lift capacity – Full height ................................................................................ 5,853 lb (2655 kg) ............................... 5,944 lb (2696 kg) .................. Maximum reach ...................................................................... 7,774 lb (3526 kg) ............................... 7,862 lb (3566 kg) .................. Ground.................................................................................... 10,410 lb (4722 kg) ............................. 10,477 lb (4752 kg) .................. Breakout force w/tilt cylinder ................................................... 12,182 lb (5526 kg) ............................. 12,928 lb (5864 kg) .................. Maximum rollback – Ground............................................................................................................... 45°......................................................... 44° ................. Carry position................................................................................................... 49°......................................................... 49° ................. @ Maximum reach ........................................................................................... 61°......................................................... 61° ................. @ Full height ..................................................................................................... 57°......................................................... 57° ................. Dig depth ................................................................................................ 3.2” (80 mm) ....................................... 2.6” (67 mm).................. Maximum grading angle w/bucket – back dragging.................................................. 71°......................................................... 72° ................. Loader clearance circle .................................................................. 349.5” (8878 mm) ............................... 350.4” (8901 mm)..................

221D– page 3 of 6

1.18 yd3 GP (0.9 m3) 1.18 yd3 GP (0.9 m3) Bucket w/Bolt-on Edge Bucket w/Teeth & Segments ................................. 0.98 yd3 (0.75 m3) ................................ 0.98 yd3 (0.75 m3) ................................. 1.18 yd3 (0.90 m3) ................................ 1.18 yd3 (0.90 m3) ................................... 80.7” (2050 mm).................................. 80.7” (2050 mm) ................................... 1,003 lb (455 kg)..................................... 915 lb (415 kg) .................................... 159” (4037 mm)................................... 159” (4037 mm) ................................. 125.3” (3182 mm)................................ 125.3” (3182 mm) .................................... 211” (5360 mm)................................ 212.9” (5406 mm) .......................................................... 41° ......................................................... 41° ................................... 98.7” (2507 mm).................................. 97.6” (2478 mm) ..................................... 31.2” (791 mm).................................... 33.2” (844 mm) ...................................... 42” (1066 mm)..................................... 43” (1093 mm) ................................. 3,597 lb (1632 kg)................................ 3,638 lb (1650 kg) .................... 3,056 lb/yd3 (1813 kg/m3)................... 3,091 lb/yd3 (1834 kg/m3)

................................. 8,908 lb (4040 kg)................................ 8,990 lb (4078 kg) ................................. 7,194 lb (3263 kg)................................ 7,277 lb (3301 kg)

................................. 5,928 lb (2689 kg)................................ 6,019 lb (2730 kg) ................................. 7,838 lb (3555 kg)................................ 7,925 lb (3595 kg) ............................... 10,472 lb (4750 kg).............................. 10,538 lb (4780 kg) ............................... 12,248 lb (5556 kg).............................. 12,987 lb (5891 kg)

.......................................................... 45° ......................................................... 44° .......................................................... 49° ......................................................... 49° .......................................................... 61° ......................................................... 61° .......................................................... 57° ......................................................... 57° ......................................... 3.0” (75 mm)........................................ 2.4” (62 mm) .......................................................... 71° ......................................................... 72° ................................. 347.6” (8829 mm)................................ 348.5” (8852 mm)

221D – page 4 of 6

INSTRUMENTATION

OPERATOR ENVIRONMENT

SERVICE CAPACITIES

Electronic Information Center Displays/Gauges – Speedometer Fuel level Hourmeter Indicator lights – Hydraulic oil temperature Voltmeter Work lights Loader control lockout Brake pressure Master indicator Parking brake Air conditioning* Air filter restriction Direct selected F/N/R Gear selected Gear position Turn signal indicator Engine coolant temperature Engine oil pressure Audible alarms – Caution alarm Critical alarm Backup alarm Horn

Cab w/heat Key start Articulated power steering w/tilt column Fully adjustable, cloth suspension seat Foot throttle Single lever electronic speed shift control, F/N/R switch in loader control handle Cup holder Retractable seat belt Storage tray Sun screen front & rear Defroster Sliding side window Dome light Wipers rear & front 12-volt auxiliary power Lighter, 12-volt External rearview mirrors R.H. steps Coat hook

Fuel tank ........................ 26 gal (100 L) Hydraulic system Total ........................... 15.5 gal (60 L) Reservoir ................... 10.5 gal (40 L) Front and rear axle Total axle (each) ............. 4 qt (3.7 L) Engine oil w/filter ............. 9 qt (8.5 L) Cooling system -36° F (-38° C).................. 3 gal (12 L)

NOTE: *If equipped with option.

LOADER Z-bar loader linkage Single control for lift and tilt Positive hold float Automatic return-to-dig Bucket position indicator on bucket Hydraulic attachment coupler

CYCLE TIME Raise w/rated bucket load....... 5.5 sec Dump w/rated bucket load Z-Bar ....................................... 1.1 sec Lower (empty) Float down ............................. 3.0 sec

221D – page 5 of 6

OPERATING WEIGHTS Z-Bar Unit equipped with ROPS cab with heater, standard counterweight, 365/80 R20 Dunlop tires, front and rear fenders, 1.18 yd3 (0.9 m3) general purpose loader bucket w/edge, full fuel, 165 lb (75 kg) operator...................... 11,661 lb (5289 kg)

STANDARD EQUIPMENT OPERATOR’S ENVIRONMENT See page 5 ENGINE Perkins 704-30 Fuel filter w/water trap Dual element air cleaner 65 amp alternator (1) 750 CCA 12-volt battery Liquid-cooled radiator Non spark-arresting muffler LOADER See page 5 DRIVETRAIN 4-wheel drive Hydrostatic transmission Single lever electronic speed shift control, F/N/R switch in loader control handle Outboard planetary axles Conventional differentials Transmission oil cooler Hydraulic wet disc brakes Mechanical parking brake

HYDRAULICS 3-spool loader control valve (8) Diagnostic quick couplers Secondary steering OTHER Front and rear fenders Lights – (2) Front driving headlights (high/low beam) (2) Front flood (2) Stop/tail lights and backup light (2) Rear flood Front and rear turn signal/flash Drawbar hitch Articulation locking bar Lift and tie-down points – front/rear Backup alarm

OPTIONAL EQUIPMENT OPERATOR’S COMPARTMENT Cab air conditioning w/heater Radio Rotating beacon Limited slip option, rear axle LOADER Attachment auxiliary hydraulics Bucket position indicator Buckets (see page 3 & 4)

HYDRAULICS Auxiliary hydraulics Load holding control device TIRES 365/80 R20 EM SPT9 14.5 x 20 MPT E91 405/70 R20 SPT9

CASE CONSTRUCTION EQUIPMENT CONTACT INFORMATION

NOTE: All specifications are stated in accordance with SAE Standards or Recommended Practices, where applicable.

IMPORTANT: Case Corporation reserves the right to change these specifications without notice and without incurring any obligation relating to such change. Visit Case Construction on the Web at: http://www.casece.com

Form No. CE 292-03-02 Replaces Form No. CE 292-08-01

Printed in U.S.A. © 2002 CASE CORPORATION. All Rights Reserved. Case and 4 IN 1 are registered trademarks of Case Corporation. ACS and Pro Series 2000 are registered trademarks of ACS Industries, Inc.

221D – page 6 of 6

NORTH AMERICA/MEXICO: 700 STATE STREET RACINE, WISCONSIN 53404 LATIN AMERICA: AV. GENERAL DAVID SARNOFF 2237 32210 – 900 CONTAGEM – MG BELO HORIZONTE BRAZIL EUROPE/AFRICA/MIDDLE EAST: 18, PLACE DES NYMPHEAS ZI PARIS NORD 11 95915 ROISSY CDG CEDEX FRANCE ASIA PACIFIC: 31-67 KURRAJONG ROAD ST. MARY’S NEW SOUTH WALES 2760

AUSTRALIA