Drives and Controls for Roller Shutters

All you need for automation

Wireless Technology

Energy Saving Clever timing also enables you to reduce your heating costs. Tip: Automatic closing of roller shutters during nightfall – thus saving 40 percent of your household energy.

Tubular drives with integrated radio receiver C PROF+ Range Individual, group and central control with up to 16 transmitters possible Automatic and manual setting of the end limits Intelligent Installation Management

Advantages of the wireless remote system

Soft obstacle detection with reverse function Freeze protection (blocking detection) in both the lower and upper positions

Anti-lifting device And if a burglar attempts to enter your home, he will be stopped by the ingenious combination of antilifting device and roller shutter drive. Take this safety feature into consideration when selecting your drives – ask your authorized dealer for more details!

Automatic and manual detection of rigid safety springs

Interference-free radio frequency

Pluggable drive cable

Varying code in the transmission protocol

Ø 35 mm 5 – 13 Nm Ø 45 mm 8 – 40 Nm

Easy to extend and easy group setting

Large operating range

Radio control units Centronic Basic controls Handheld transmitter EC541-II

2 channels with LED display

Individual or central control

Possible programming of 2 indivdually selectable intermediate positions

Available in black and white Handheld transmitter EC545-II 5-channel 5 groups/drives, individual control possible Central channel „all“

Obstacle detection Intelligent tubular drives stop automatically when recognising an obstacle. This protects the obstacle as well as the roller shutter and, on top of this, saves your nerves.

Handheld transmitter EC142-II

1-channel

Individual-, group- or central control Metal key ring

Convenience class controls

Handheld transmitter with memory function MC441-II Programming of 2 free individually selectable intermediate positions possible Individual or central control Available in black and white

Wall-mounted transmitter with memory function MC511 Two switching times are easily programmable Individual or central control Can be integrated into existing switch ranges

Premium class controls Handheld transmitter with display & timer TC445-II

Timer for light sensor, radiocontrol TC511

5 groups/drives, individual control possible

Integrated astro function

Central channel „all“

Optional: Light sensor SC43

Individual or central control

Astro evening function TC4410-II 10-channel handheld transmitter Light Sensor Small but perfectly formed! The usage of a light sensor protects you from over-heated rooms, faded furniture as well as from wilting plants. An essential part of an intelligent roller shutter automation.

Sep. time control for every channel Light sensor, radio control SC431-II Sunshade and twilight function Integrated glass-break vibration sensor

5 channel wall transmitter EC315 5 channel with LED display Programming of 2 free individually selectable intermediate positions possible

Premium Technology

Tubular drives with electronic limit switches RP and RP+ Range RP+ with anti-lifting device Automatic and manual setting of end limits Intelligent Installation Management Sensitive obstacle detection Freeze protection (blocking detection) in both the lower and upper positions

Advantages of the premium system

Programmable torque adjustment

Automatic detection of end limits

Parallel switching possible without relays

Obstacle detection

Type RP, RP+: Ø 45 mm 8 – 40 Nm

Save cost for cut-off relays

Ø 35 mm 5 – 13 Nm series PR+ with electronic limit switches

Jammed/Frozen shutter protection Anti-lifting device ensures greater security

Timers Convenience class control Memory pushbutton MC42

Premium class control Timer TC52 and TC42

Intelligent pushbutton with automatic mode

Date, time and control programme are preset

Two switching times are easily programmable

Individual switching times can be easily set Astro- and Holidayfunction Light sensor (TC52)

External receivers Radio receiver with zero potential VC520

Individual control device with operating element UC520

Zero potential switch contact

Integrated radio receiver

Can be used, e.g., for alarm systems

Blind-mode: Exact setting of blind louvres via jogging mode

External radio receiver flushmounted VC120 Compact design ideal for mounting inside the roller shutter box Combinable with light sensor SC431-II Receiver socket VC180 Switching 230 V devices Switching capacity up to 2.000 W

Radio receiver VC320 Mountable in roller shutter box Integrated Memory-Timer-Function

Memory switch time programmable

Radio receiver, flush-mounted VC420-II To retrofit existing drives to make them radio-controlled Can be used also as a lighting control device Roller Shutter VarioSet Radio control RVS241-II Radio control retrofit set for existing roller shutter drives Can be used, e.g., for lighting systems

Basic Technology

Tubular drives with mechanical limit switches C M Range Quiet, smooth operation Easy setting of end limits For roller shutter and sun protection applications Ø 35 mm

5 – 13 Nm

Ø 45 mm

8 – 50 Nm

Ø 58 mm 44 – 120 Nm

Individual controls Basic products Switch / pushbutton EC41 Can be used as a nonlocking or a locking pushbutton switch Surface mounting Switch / pushbutton EC42

Advantages of the basic system Easy setting of final positions Overheat protection for motor Shutter/screen/cloth can be wound up around motor head

Group controls Individual control device UC42 Fits into any flush-mounted switch box (Ø 58 mm min.) Individual, group and central contoller Individual control device with operating element UC52

Can be used as a nonlocking or a locking pushbutton switch

Individual, group and centralcontroller

Flush mounting

Compatible with many types of switchgear

Switch / pushbutton EC52

Automatic command can be deactivated

Can be used as a nonlocking or a locking pushbutton switch Compatible with many types of switchgear

Timers Convenience class products U25 Clearly arranged display Simple operation Individually programmable and pre-programmed switching times Connection for light sensor LS25

U30 For unobtrusive integration in an existing belt box Clearly arranged display Individually programmable and pre-programmed switching times Connection for light sensor LS30

Diese Seite um 16mm verkürzen

Pluggable drive cable

Why more expensive is actually less expensive … A closer look shows that the roller shutter drive with the most functions is not necessarily the most expensive: Becker - Drives with radio receiver and electronic limit switches offer the highest comfort and benefit during installation and use. Extra costs would be required to achieve the same wide range of benefits with conventional drives. A comparative price analysis there-fore throws up a few surprises: So, all in all, the more expensive drive is actually the less expensive one.

COST COMPARISON Radio-controlled drive PROF+ Electronic drive PR+ Mechanical drive M

Only individual control unit

Individual and group control units

Differences in price for drive with control unit

Differences in price for drive with control unit

The explanation is quite simple: The proven standard electronics in the radio-controlled drive provides some exceptionally useful features, such as obstacle and jam recognition and burglar protection to name just a few.

Differences in price for an individual drive

Drives and control units for sun protection Please ask your authorised dealer!

Differences in price for an individual drive

Easy and effective operation does not involve routing control cables to the drives. Control functions are carried out simply, interference free and without any health risks at all via a radio transmitter. This enables the operation of individual roller shutters and the control of entire rollershutter groups. Many functions are preset and run fully automatically. And it goes without saying that manual intervention is possible at any time. Quite simple, just as you wish.

For a selection of interesting automated roller shutter functions, take a look inside this brochure. Your Becker specialised dealer will be pleased to explain further details which will increase your comfort in every day life.

Drives and control units for garage doors Please ask your authorised dealer!

Drive types

M

RP+

PR+

PROF+

Mechanical

Electronic

Electronic

Radio control

Drive functions (not always possible without the respective accessories)

• • • • • •

• •1) • • • •

• •1) • • • •

•

•

•

•4) • •

•4) • •

•4) • •

•

•

•

•

•

•

• • • • • • • •

Jam recognition when opening (e.g. bottom edge frozen) Obstacle recognition when closing (e.g. flower pot located on a window sill) Soft stop at the top

•3)

Parallel drive connection 2) Automatic adjustment of power requirements resulting from alterations to the element Curtain length adjustment: Exact switch-off in the final positions during the entire service life Automatic locking when using burglar resistant anti-lifting devices Functions resulting from the drive type and operating element (selectable) Wireless operating element. The choice of position in a room is usually entirely free (whilst taking local conditions into consideration) Simple automatic switching times („memory function“) High-quality automatic switching time mechanism (timer) Set-up and alter groups without the need for electrical wiring Set-up and alter the central control unit without the need for electrical wiring Retrofit a sun sensor with an existing timer Combined sun and twilight sensor, can be retrofitted with glass break alarm, wireless Automatically move to selected intermediate positions (sun protection, ventilation)

Not included in the comparison: Drives with gearbox designed to facilitate manual operation via a hand crank. Type: „HK“

Special drives

Drives with a 12 V or 24 V power supply (e.g. for garage roller doors). Type: „G“ 1) 2) 3)

with rigid tube connectors resp. usage of an adapter for obstacle protection (PROF+) several drives are always simultaneously controlled via a single command, e.g. bay only with cut-off relays

4) Radio-controlled operation possible via an external receiver. Suitable for retrofitting existing conventional drives into a radio network of the same frequency.

E-Mail: [email protected] www.becker-antriebe.com

Why roller shutters?

1 2 3

And why automation…? Insulation Roller shutters closed on time reduce effectively heat loss through windows and save heating cost. Energy saving.

Noise protection Noise can ruin your life and make you ill. Modern roller shutters offer an effective sound insulation.

1 2

5

Roller shutters need to be opened and closed throughout your home every day. Enjoy the comfort of automated roller shutters.

Security Automated roller shutters create the perception that your home is occupied even when you are away and cannot be easily pushed-up.

Privacy

Sun protection

Roller shutters keep out prying eyes after dark.

Window-mounted light sensors control each roller shutter individually. Even when you are not at home.

3

Heat insulation

4

Effective comfort

Roller shutters provide effective sun protection in the summer. Your home stays cool and your plants protected.

Value enhancement Roller shutters really improve the energy balance of your home, increasing the value of the property.

4 5

Ecological responsibility Automated roller shutters help to cut heating costs in the winter and reduce energy for air conditioning systems in the summer.

Comfortable investment Greater energy efficiency and higher property value ensure increased comfort and a better quality of life.

01/2012 4995 600 310 0 www.DIVIICE.de

BECKER-Antriebe GmbH Friedrich-Ebert-Str. 2-4 35764 Sinn Germany Tel.: +49 (0) 27 72/5 07-0 Fax: +49 (0) 27 72/5 07-151