905-814-6859 - 1-866-517-3289 - www.marcur.com
DRILL BITS GOOD JOBBER LENGTH DRILL BITS
Economically priced
Fully ground flutes
Black oxide finish reduces chip welding
Industrial quality high speed steel 135° split point eliminates "walking"
• Self-centering 135° split points provide more consistent hole sizes and accurate hole placement without a center punch • Manufactured from high speed steel to drill faster and last longer • Fully ground flutes for consistent hole sizes and fast chip evacuation • Black oxide finish prevents chips from welding to flutes and cutting surfaces, extending cutting tool life • Top quality bits at low initial cost, ideal for cordless drills, portable drills and drill presses PROD. NO.
Diameter
Pkg
570204 570205 570206 570207 570208 570209 570210 570211 570212 570213 570214 570215 570216 570217 570218
1/16" 5/64" 3/32" 7/64" 1/8" 9/64" 5/32" 11/64" 3/16" 13/64" 7/32" 15/64" 1/4" 17/64" 9/32"
12 12 12 12 12 12 12 12 12 12 12 12 12 12 12
PROD. NO.
Diameter
570219 570220 570221 570222 570223 570224 570225 570226 570227 570228 570229 570230 570231 570232
19/64" 5/16" 21/64" 11/32" 23/64" 3/8" 25/64" 13/32" 27/64" 7/16" 29/64" 15/32" 31/64" 1/2"
Pkg 6 6 6 6 6 6 6 6 6 6 6 6 6 6
*Drill bits sold in package quantity
JOBBER LENGTH DRILL BIT SET
• Available in popular twenty-nine piece format • Strong metal index box to protect and organize your bits • Featuring the same high quality jobber length bits as offered in open stock PROD. NO.
MOD. NO.
Description
570108
29CD
29 pieces, 1/16" through 1/2" by 64ths
PRENTICE DRILL BITS Fully ground flutes for closer hole tolerances and better chip ejection
Industrial quality high speed steel
Reasonable initial cost, and good service life 135° split point eliminates “walking”, provides fast penetration
36
DRILL BITS
CAT07-AC.indd 36
• • • •
Industrial quality high speed steel prentice drill bits at a reasonable initial cost Featuring 135º split points for fast penetration and accurate hole placement without centre punching Fully ground flutes for closer hole tolerances and better chip ejection Black oxide finish reduces chip welding for longer tool life
PROD. NO.
Diameter
Shank Diameter
Pkg
PROD. NO.
Diameter
570533 570534 570535 570536 570537 570538 570539 570540 570541 570542 570543 570544 570545
33/64" 17/32" 35/64" 9/16" 37/64" 19/32" 39/64" 5/8" 41/64" 21/32" 43/64" 11/16" 45/64"
1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"
1 1 1 1 1 1 1 1 1 1 1 1 1
570546 570547 570548 570549 570550 570551 570552 570556 570560 570564 570568 570572 570580
23/32" 47/64" 3/4" 49/64" 25/32" 51/64" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-1/4"
Shank Diameter 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"
Pkg 1 1 1 1 1 1 1 1 1 1 1 1 1
www.jetequipment.com www.jetequipment.com 2/2/07 5:20:08 PM
905-814-6859 - 1-866-517-3289 - www.marcur.com
DRILL BITS BETTER
Three ground flats eliminate chuck slippage
JOBBER LENGTH DRILL BITS • • • • •
Professional grade M2 high speed steel bits at competitive prices Bronze oxide “gold” lands to reduce friction for cooler cutting and longer bit life Nitro carburized “black” flutes for improved surface hardness, bit stays sharp longer 135º split points eliminate “walking” Three ground flats eliminate chuck slipping
PROD. NO.
Diameter
Pkg
570604 570605 570606 570607 570608 570609 570610 570611 570612 570613 570614 570615 570616 570617 570618
1/16" 5/64" 3/32" 7/64" 1/8" 9/64" 5/32" 11/64" 3/16" 13/64" 7/32" 15/64" 1/4" 17/64" 9/32"
12 12 12 12 12 12 12 12 12 12 12 12 12 12 12
Fully ground flutes Bronze Oxide Gold lands reduce friction
PROD. NO.
Diameter
570619 570620 570621 570622 570623 570624 570625 570626 570627 570628 570629 570630 570631 570632
19/64" 5/16" 21/64" 11/32" 23/64" 3/8" 25/64" 13/32" 27/64" 7/16" 29/64" 15/32" 31/64" 1/2"
Pkg 6 6 6 6 6 6 6 6 6 6 6 6 6 6
JOBBER LENGTH – 3/8" REDUCED SHANK • Same as above but with 3/8" reduced shanks • Allows bits 25/64" - 1/2" diameter to fit in popular 3/8" chuck drills • Shanks offer Torque Drive 3 ground flats to eliminate slippage PROD. NO.
Diameter
Pkg
571025 571026 571027 571028 571029 571030 571031 571032
25/64” 13/32” 27/64” 7/16” 29/64” 15/32” 31/64” 1/2”
6 6 6 6 6 6 6 6
M2 H.S.S.
135° split point eliminates “walking”
Reduced Shank Fully ground flutes Bronze Oxide Gold lands reduce friction M2 H.S.S.
135° split point eliminates “walking”
JOBBER LENGTH DRILL BIT SETS
• • • •
Available in popular twenty-nine piece format Strong metal box to protect and organize your bits 570146 set contains straight shank bits 570147 set contains reduced shank bits
PROD. NO.
MOD. NO.
570146 570147
BG29 BG29RS
Description 29 PC, 1/16" through 1/2" by 64ths 29 PC, 1/16" through 1/2" by 64ths Sizes 25/64" -1/2" are 3/8" reduced shanks 570146 - 29 PC
Abrasives Catalogue CAT07-AC.indd 37
570147 - 29 PC Reduced Shank
DRILL BITS
37 37
2/2/07 5:36:34 PM
905-814-6859 - 1-866-517-3289 - www.marcur.com
DRILL BITS BEST
Bronze oxide finish to reduce friction
Fully ground flutes
Three ground flats eliminate chuck slipping
High moly steel offers greatest strength and rigidity, longer lasting cutting edges and improved hole tolerances
135° split points eliminate "walking"
Bronze oxide finish to reduce friction
Fully ground flutes
135° split points eliminate "walking"
38
DRILL BITS
CAT07-AC.indd 38
Three ground flats eliminate chuck slipping
• JET-KUT™ Gold drill bits are the most advanced drill bits available in the Canadian market • These super high performance bits feature razor sharp 135° split point self centering tips, eliminating “walking” and the need for centre punching. These bits penetrate on contact! • The superior bronze oxide (gold) ground flute finish reduces friction, allowing outstanding drilling performance with less operator pressure • Special flute form enhances chip ejection, reduces drill retractions (woodpeckering) and improves coolant flow to the tip • Heavy duty, high molybdenum steel offers greater strength and rigidity, longer lasting cutting edges and improved hole tolerances, permitting higher feed rates • JET offers the exclusive “TORQUE-DRIVE”™ three flat shank for chuck to bit gripping power that is unparalleled in the industry. (Available on 3/16" diameter and larger bits) • This unique feature eliminates slipping which greatly reduces chuck and shank damage and increases cutting efficiency, especially when used on today’s popular keyless chucks which have a tendency to slip • Drill up to four times faster and last up to 7 times longer than regular drill bits in steel, stainless steel and alloy steel applications
JOBBER LENGTH DRILL BITS PROD. NO.
Diameter
Pkg
570254 570255 570256 570257 570258 570259 570260 570261 570262 570263 570264 570265 570266 570267 570268
1/16" 5/64" 3/32" 7/64" 1/8" 9/64" 5/32" 11/64" 3/16" 13/64" 7/32" 15/64" 1/4" 17/64" 9/32"
12 12 12 12 12 12 12 12 12 12 12 12 12 12 12
PROD. NO.
Diameter
Pkg
570269 570270 570271 570272 570273 570274 570275 570276 570277 570278 570279 570280 570281 570282
19/64" 5/16" 21/64" 11/32" 23/64" 3/8" 25/64" 13/32" 27/64" 7/16" 29/64" 15/32" 31/64" 1/2"
6 6 6 6 6 6 6 6 6 6 6 6 6 6
JOBBER LENGTH 3/8" REDUCED SHANK High moly steel offers greatest strength and rigidity, longer lasting cutting edges and improved hole tolerances
• Same as above but with 3/8" reduced shanks • Allows bits over 3/8" in diameter to fit in popular 3/8" chuck drills • Shanks offer 3 ground flats to eliminate slippage PROD. NO.
Diameter
Pkg
PROD. NO.
Diameter
Pkg
571125 571126 571127 571128
25/64" 13/32" 27/64" 7/16"
6 6 6 6
571129 571130 571131 571132
29/64" 15/32" 31/64" 1/2"
6 6 6 6
www.jetequipment.com www.jetequipment.com 2/2/07 5:36:46 PM
905-814-6859 - 1-866-517-3289 - www.marcur.com
DRILL BITS BEST LETTER SIZE
• Same quality features as JET-KUT™ Gold jobber bits but in popular letter size instead of fractional sizes PROD. NO.
Diameter
Pkg
Tap Size
570906 570921
F U
12 6
5/16"-18NC 7/16"-14NC
570906
JOBBER LENGTH DRILL BIT SETS • Available in popular twenty-nine piece format • Strong metal index box to protect and organize your bits • Featuring the same high quality jobber length bits as offered in open stock PROD. NO.
MOD. NO.
570141
GF-21R
570142 570143
Description
570141 - 21 PC
570142 - 29 PC
21 pieces, 1/16" through 1/4" by 64ths & 9/32" through 1/2" by 32nds GF-29 29 pieces, 1/16" through 1/2" by 64ths GF-29RS 29 pieces, 1/16" through 1/2" by 64ths Sizes 25/64 - 1/2" are 3/8" reduced shank
PRENTICE DRILL BITS – 118° SPLIT POINT
• Heavy duty high molybdenum steel hardened above the industry standard for increased consistency and greater wear resistance • Flutes are ground to extremely tight tolerances for increased accuracy and consistency in the point and split grinding process, resulting in more accurate hole sizes • Flutes have a very thin case of nitro-carburized surface to provide extra wear resistance along the cutting edge of the point • Special flute form enhances chip ejection, reduces drill retractions (woodpeckering) and improves coolant flow to the tip • Split point provides the drill with self-centering/non-walking characteristics by giving the drill two starting points • Split point also reduces the thrust required to penetrate the workpiece • The superior bronze oxide (gold) ground flute finish reduces friction, allowing outstanding drilling performance with less operator pressure • JET offers the exclusive “TORQUE-DRIVE”™ three ground flats on the shank to provide a strong positive chuck grip virtually eliminating the potential for the drill to slip in the chuck • The thin web of the JET-KUT™ Gold Prentice bit permits fast feed rates which make it ideal for drilling work hardening steels such as 304, 306 and 316 stainless PROD. NO.
Diameter
Shank Diameter
Pkg
570436 570440 570444 570448 570452 570456 570460 570464 570472 570480
9/16" 5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 1" 1-1/8" 1-1/4"
1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"
1 1 1 1 1 1 1 1 1 1
570143 - 29 PC Reduced Shank
Three ground flats eliminate chuck slippage
Bronze oxide & nitro carburized finish to reduce friction
Fully ground flutes
118° split points eliminate walking
Abrasives Catalogue CAT07-AC.indd 39
DRILL BITS
39 39
2/2/07 5:36:53 PM
905-814-6859 - 1-866-517-3289 - www.marcur.com
DRILL BITS BEST
Cobalt Steel permits drilling speeds 30% higher than H.S.S. Fully ground flutes
Ideal for Stainless Steel, High Alloy Steels and Titanium
Bronze Oxide finish to reduce friction
135° split points eliminate "walking"
• Heavy duty bits for use in drilling hard tough metals such as free machining stainless steel, high temperature alloys, titanium and certain plastics • High red hardness of cobalt steel permits drilling speeds 30% higher than regular high speed steel drills • These super high performance bits feature razor sharp 135° split point self centering tips, eliminating “walking” and the need for centre punching. These bits penetrate on contact! • The superior bronze oxide (gold) ground flute finish reduces friction, allowing outstanding drilling performance with less operator pressure • Special flute form enhances chip ejection, reduces drill retractions (woodpeckering) and improves coolant flow to the tip • For best results use in rigidly held positive feed drilling equipment
JOBBER LENGTH DRILL BITS PROD. NO.
Diameter
Pkg
573404 573405 573406 573407 573408 573409 573410 573411 573412 573413 573414 573415 573416 573417 573418
1/16" 5/64" 3/32" 7/64" 1/8" 9/64" 5/32" 11/64" 3/16" 13/64" 7/32" 15/64" 1/4" 17/64" 9/32"
12 12 12 12 12 12 12 12 12 12 12 12 12 12 12
PROD. NO.
Diameter
Pkg
573419 573420 573421 573422 573423 573424 573425 573426 573427 573428 573429 573430 573431 573432
19/64" 5/16" 21/64" 11/32" 23/64" 3/8" 25/64" 13/32" 27/64" 7/16" 29/64" 15/32" 31/64" 1/2"
6 6 6 6 6 6 6 6 6 6 6 6 6 6
BEST TWIN END DRILL BITS 135° split points eliminate "walking"
40
DRILL BITS
CAT07-AC.indd 40
• Twin cutting ends allow twice the cutting performance and life • JET-KUT™ Gold drill bits are the most advanced drill bits available in the Canadian market • These super high performance bits feature razor sharp 135° split point self centering tips, eliminating “walking” and the need for centre punching. These bits penetrate on contact! • The superior bronze oxide (gold) ground flute finish reduces friction, allowing outstanding drilling performance with less operator pressure • Heavy duty high molybedenum steel and extra rugged uncleared construction improves performance and reduces breakage PROD. NO.
Diameter
Overall Length
Pkg
570358 570830
1/8" 30 wire gauge
1-15/16" 2"
12 12
www.jetequipment.com www.jetequipment.com 2/2/07 5:37:11 PM
905-814-6859 - 1-866-517-3289 - www.marcur.com
STEP DRILLS BEST • • • • •
Ideal for hole making in sheet metal and other thin materials M35 high speed steel stays sharp longer for fast cutting and long service life Split point, two flute design provides fast penetration and maximum chip clearance Gold finish minimizes heat build up Three flat shank prevents slipping in chuck
PROD. NO.
Size Range
579202 579204 579206 579208 579212 579214
1/8"–1/2" 3/16"–1/2" 3/16" –7/8" 1/4"–3/4" 1/4"–1" 1/4"–1-3/8"
No. of Hole Sizes 13 6 12 9 10 11
M35 high speed steel
Shank Size
Step Increments
Step Thickness
Overall Length
1/4" 1/4" 3/8" 3/8" 3/8" 3/8"
1/32" 1/16" 1/16" 1/16" * **
9/64" 3/8" 9/64" 9/64" 5/32" 9/64"
3-1/8" 3-1/8" 3-1/4" 2-3/4" 3-1/4" 3-1/4"
Gold finish
TORQUE DRIVE™ 3-flat shank
Size range laser printed on tool
* 1/4", 13/32", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" ** 1/4", 25/64", 35/64", 11/16", 13/16", 7/8", 1", 1-1/8", 1-7/32", 1-1/4", 1-3/8"
CAR REAMERS BEST • • • • • • •
Used for enlarging existing drilled or formed holes in structural steel plate Aggressive fast spiral reamers made of high tungsten tool steel for maximum life Gold and black surface treated body and clearance, cuts cooler and stays sharp longer Right hand cut with left hand spiral prevents tool from hogging into the hole Three flat shanks prevent slippage in chuck Stop collar reduces possibility of impact damage to chuck Ideal for reaming applications on truck frames, bridges, pressure vessels and rail cars
PROD. NO.
Diameter
579326 579328 579330 579333
3/8" 1/2" 5/8" 3/4"
Point Min. Starting Diameter Hole Size 0.250" 0.281" 0.343" 0.406"
5/16" 3/8" 7/16" 1/2"
Overall Shank Length Diameter 5-7/8" 5-7/8" 6-3/8" 6-7/8"
1/2" 1/2" 1/2" 1/2"
SUPER PREMIUM CAR REAMER SET • Four popular reamers in one convenient set • Featuring the same high quality reamers as offered in open stock PROD. NO.
MOD. NO.
Description
570136
4CR
4 PC, 3/8", 1/2", 5/8" & 3/4"
Abrasives Catalogue CAT07-AC.indd 41
DRILL BITS
41 41
2/2/07 5:37:17 PM