GB
SERVICE MANUAL Washing Machine 2005 Aqualtis
DRAFT
All the parts included in this document are the property of Indesit Company S.p.A. All rights reserved. This document and the information it contains are supplied without liability for possible errors or omissions; no part of this document can be reproduced, used or copied without written permission or without being authorised by the terms of a contract clause.
Service Manual Aqualtis - 2005
Edition 2005.07.06
Language English
GB
CONTENTS OF THE MANUAL: NOTE FOR THE ENGINEER This manual is a supporting document for technical personnel. It contains a description of the various product types, the general operating principle, and indications concerning assistance. Technical personnel should anyway consult the specific model on (servicenet.indesitcompany.com) to access data and updates of electrical diagrams, technical bulletins, and spare parts.
Service Manual Aqualtis - 2005
Edition 2005.07.06
Language English
2
GB CONTENTS 1. PRODUCT TYPE
4-7
Legend Interfaces Technical features Energy Label
4 5 6 7
2. OPERATING LOGIC
8-14
Product features Explanations on Setting & Functioning Programs
8-10 11-12 13-14
3. COMPONENTS
15-17
4. WIRING DIAGRAMS
18-19
5. TECHNICAL ASSISTANCE
20-28
Demo Mode Auto Test (Testing / Running-in) Auto Test sequence Fault & Solutions Doctor Trouble Shooting Assembly/Disassembly
20 20 20 21-23 24 24-25 26-28
6. EXPLODED VIEW
29-33
7. APPENDIX
31-41
Wash data table Programs diagrams
Service Manual Aqualtis - 2005
34 35-47
Edition 2005.07.06
Language English
3
GB
TYPE
1. TYPOLOGY OF PRODUCT: 1.1. LEGEND:
A Q 1st letter Brand A=Ariston
2nd letter Product line Q=washing machine QM=washerdryer
L 8 3rd letter Type blank= standard 6kg x= maxi 7,5kg S = Slim
4th letter user interface L= led F=lcd/digit D= DISPLAY
1st&2nd Number Max Spin Speed 4 = 400 5 = 500 16 = 1600
9 H 3rd Number Specs 8/9=SILENT 3=2 Function button 4=3 function button
4th letter height h: 100cm high blank = std 5=with delay timer
5th letter Colour S = Silver blank = White
Example AQL 89H Ariston led WM; 800rpm;triphase motor; 100CM
Service Manual Aqualtis - 2005
Edition 2005.07.06
Language English
4
GB
TYPE
1.2. INTERFACE:
LED
LCD
DISPLAY
1 1. 2. 3. 4. 5. 6.
2
3
Button /LED ON/OFF AND RESET KNOB PROGRAM Button TEMPERATURE Button SPIN Button INTENSITY Button /LED OPTIONS
Service Manual Aqualtis - 2005
4
6
5 7. 8. 9. 10. 11.
7 8
9
10
11
Icon ECO Icon WASH PHASES Button /LED START/ PAUSE LED DOOR LOCK Button /LED CHILD LOCK
Edition 2005.07.06
Language English
5
GB
TYPE
1.3. TECHNICAL FEATURES:
MODELLO:
AQUALTIS 1600
Capacity:
from 1 to 7,5 Kg
Dimensions: Width:
59,5 cm
Height:
85
Depth:
64,5 cm
cm
Water supply: Maximum pressure:
10
bar
Minimum pressure:
0,5
bar
Drum capacity
62
litres
Power supply: Tension:
220/240 volt. 50 Hz
Maximum power absorbed:
2100 Watt.
Maximum spin speed:
Service Manual Aqualtis - 2005
1600 rpm
Edition 2005.07.06
Language English
6
GB
Energy
Washing machine
ARISTON
Manufacturer Model
TYPE
1.3. ENERGY LABEL:
AQUALTIS
Brand Modello
More efficient
A
Energy class
Less efficient
1.27
Energy c o n s u m p t i o n kWh/cy c l e
Energy consumption Kw/h - normal cycles
(based on standard test results for 60° C cotton cycle) Actual energy consumption will depend on how the appliance is used
Washing performance A: higher
G: lower
Spin drying performance A: higher
AB C D E F G
Wash class
AB C D E F G
Spin class
G: lower
Spin speed (rpm)
1600
rpm
Capacity (cotton) kg Water consumption
7. 5 62
Max load Kg Water volume (litres) - normal cycles
Noise (dB (A) re 1 pW)
Washing Spinning
Further information is contained in product brochures
Norm EN 60456 Washing machine label Directive 95/12/EC
REMARK: The washing machine, with the function MINI LOAD in operation, maintains the energetic conditions indicated on the label (Energy “A”, Wash “A” and Spin “A”) if all the wash features are observed, otherwise the increase of energy consumption will change the energy class in B.
Service Manual Aqualtis - 2005
Edition 2005.07.06
Language English
7
GB 2. FUNCTIONING: 2.1. PRODUCT FEATURES AND TECHNOLOGICAL INNOVATIONS: DISPENSER: OPERATION
It is like a traditional dispenser, with the same principles of functioning. It is placed inside the machine, behind the door; you can reach it by opening the door. Some models are equipped with Push-Push lock.
DRUM ASSEMBLY: The drum assembly is held up by three springs, it is 5°-inclined to make the machine more ergonomic and to facilitate the introduction of clothes into the drum, whose maximum capacity is 7,5 Kg.
REMARK: the right position of the springs is important to maintain a correct inclination.
OKO SYSTEM: The Oko ball is placed inside the tube, connecting the drum to the drain pump.
Service Manual Aqualtis - 2005
The drum is provided with a rubber ring, which absorbs the noises produced by the contact of the Oko ball with the drum.
Edition 2005.07.06
Language English
8
GB PRESSURE SWITCH: The connection of the pressure switch tube is placed in the lower part of the drum, but not on the level with the pump tube, as in other washing machines.
OPERATION
Its housing is obtained by die-casting and it is the final part of an air trap, which determines the right functioning of the washing machine.
DOOR: The door of this washing machine is a single assembly composed by the lock, the hinges, the display board cable, the door, the inner door.
HOW TO OPEN THE DOOR, BLOCKED IN CASE OF AN EMERGENCY: There are special circumstances which cause the blockage of the door, for example a prolonged interruption of power supply, any blockage of the pump, impossibility to open the door; the clothes inside the machine can be recovered after having unlocked the door, even if there is water in the tank. This procedure must be performed, paying attention to the following safety instructions:
3. Using a flat-type screw driver, remove the plinth of the machine. 4. Pull the emergency cord at the bottom on the left to unlock and open the door.
1. Switch off the washing machine 2. For further safety reason, unplug the washing machine (remember that water could drop on the floor).
Service Manual Aqualtis - 2005
Edition 2005.07.06
Language English
9
GB WATER FILLING: Water filling can occur in two phases: the first is common to all the programs, the filling is controlled by the pressure switch; the second phase, performed by some programs only, water filling changes according to the wash cycle of the washing machine setting.
For example, in the diagram below (standard wash cycle at 40°), after a first water filling controlled by the pressure switch, the machine performs a second water filling (1 litre + 1 litre of water) of two litres of water.
Service Manual Aqualtis - 2005
Edition 2005.07.06
OPERATION
To know if a program performs a second water filling, look at the wash diagrams in the appendixes (from page 34 to page 42).
Language English
10
GB
This button has a double function: it switches on/off the machine and resets a program in progress. To switch on the machine, press the button. The indicator lights (led) turn on simultaneously for 1 second. To switch off the machine, press the button again, the machine will be on stand-by. To reset the machine, press and hold the button for three seconds to cancel the program in progress.
OPERATION
2.2. BUTTONS AND WASH FUNCTIONS: ON/OFF & RESET BUTTON:
START/PAUSE BUTTON:
It is used to start/stop a wash cycle selected.
PROGRAM SELECTOR:
It permits the selection of a program and can be turned clockwise and anticlockwise indifferently. A lit icon corresponding to the program switches on. The electronic board sets temperature, spin speed and wash intensity, according to the program chosen. The user can always change the program through the suitable buttons.
Service Manual Aqualtis - 2005
Edition 2005.07.06
Language English
11
GB
When this icon is lit, the door is blocked to prevent accidental opening or eventual damages. To unblock the door, wait for the light to switch off. This model allows the user to open the door during the program by pressing the Pause button. The door will open, but in presence of safety conditions, for example: no much water in the tank, a low temperature of the machine.
OPERATION
DOOR LOCK LED:
BUTTONS SELECTING WASH FEATURES:
It is possible to change the wash features of the cycle selected in order to choose temperature, spin speed or wash intensity for your clothes. REMARK: The machine automatically escapes the selection of different incompatible functions.
DOOR LOCKED LIGHT:
It has a safety function. The selection of this function avoids anyone using it improperly. All the buttons of the washing machine are blocked, during the normal functioning or when the machine is on Stand-by. To unlock the buttons, press and hold the button for about four seconds.
Service Manual Aqualtis - 2005
Edition 2005.07.06
Language English
12
GB 2.3. PROGRAMS: 2.3.1 SETTING A PROGRAM:
OPERATION
To set a program (wash cycle), follow these instructions:
1. Open the door and load the clothes to be washed. 2. Open the dispenser and pour detergent on it. 3. Close the detergent dispenser. 4. Close the door. 5. Switch on the washing machine. 6. Select a program by turning the knob clockwise
or anticlockwise. 7. The user could eventually customize the wash cycle by changing temperature, spin speed, wash intensity or other characteristics. 8. Start the wash cycle selected by pressing Start/ Pause button.
2.3.2 CHANGING A PROGRAM ALREADY SET: How to change a program already set:
1. Press ON/OFF/Reset button 3 seconds to reset the cycle already set. 2. Press again Power On/Reset button.
3. Choose a new program. 4. Customize the wash cycle 5. Press Start/Pause button to start a new cycle.
2.3.3 PROGRAM PROGRESS LIGHTS:
These lights switch on progressively to indicate the phase reached by the wash cycle selected.
Service Manual Aqualtis - 2005
Edition 2005.07.06
Language English
13
GB 2.3.4 PROGRAM TABLE Program table Detergents Icon
Max temperature (°C)
Program overview
Wash
Softener
Max. load (Kg)
Normal
With Mini Load
Cycle duration
Normal
With Mini Load
OPERATION
Daily programs WHITE COTTONS COLOURED COTTONS DELICATE SYNTHETICS MIN30': It is used to refresh not very dirty clothes (it is not suitable to wool, silk and clothes to be preferably washed by hand). Intensive programs PRE-WASH: to remove obstinate stains. (Add detergent in the suitable dispenser). DURABLE SYNTHETICS Special programs SHIRTS SILK: for silk, viscose clothes, lingerie. WOOL: for wool, cashmere, etc. DUVETS: for goose down clothes. BED & BATH: for bed and bath linen. Partial programs Rinse of durable clothes Rinse of delicate clothes Spin of durable clothes Spin of delicate clothes Drain
FUNCTIONS: Aqualtis washing machine is provided with classical and innovative functions, as:
Function
Effect
Characteristic
Not compatible with
It makes clothes The machine increases the quantity of water to be Mix 30min., Silk, Wool, whiter, perfectly supplied and the cycle grows longer to wash very Duvets and partial prodirty clothes intensely. clean. grams. Super Wash: It reduces creases on the clothes, making the ironing easier.
It reduces the creases changing wash and spin programs. At the end of the cycle, the drum slowly turns at regular intervals to avoid the formation of creases on the clothes. The “Easy Iron” light flashes during this phase. In case of selection of the “Silk” program, the clothes remains soaked and the light flashes up to press Start/Pause button or “Easy Iron” button.
Wool, Strong spin, Soft spin and Drain.
Easy Iron:
Extra Rinse:
Mini Load
It makes the rinse It permits another rinse to assure the whole elimination of Mix 30min., Strong spin, detergent. It is especially useful to people with skin sensimore efficacious. tive to detergents. It is advisable to start the machine with Soft spin and Drain. a full load and to use a high dosage of detergent (look at the Appendix: Wash data table)
It is suitable for loads equal to or lower than the half of the maximum capacity of the machine.
Service Manual Aqualtis - 2005
It lowers power and water consumption and shortens the duration of the wash cycle. REMARK: Use a dosage of detergent which is equal to or lower than the half of the maximum quantity provided for this cycle.
Edition 2005.07.06
Strong spin, Soft spin and Drain.
Language English
14
GB
COMPONENTS
3. COMPONENTS:
Tachometric
Motor Tension: Watt: Amp: Ohm:
230 volt. 800 3,07 amp. 3.51
Ohm:
115,00
Drain pump Solenoid valve unit Tension: Ohm:
230 volt. 170,00
Tension: Amp: Ohm:
230 volt. 3,07 amp. 170,00
Heater Tension: Watt: Amp: Ohm:
Service Manual Aqualtis - 2005
Edition 2005.07.06
230 volt. 2200 10 amp. 25,00
Language English
15
GB
COMPONENTS
Display board.
Main board.
Door.
NTC.
Transformer.
Door lock.
Service Manual Aqualtis - 2005
Edition 2005.07.06
Language English
16
GB Back part. 1 Pulley. 2 Belts 3 Motor 4 Tank
4
5 Heater
1
6 Shock absorber
COMPONENTS
7 Drain pump
2 6 5 3 7
Upper part. 1 Display cable
7
6
1
5
2 Door gasket 3 Hopper 4 Counterweight
2
4
5 Pressure switch 6 Spring 7 Anti-noises filter 8 Solenoid valve unit
3 8
Service Manual Aqualtis - 2005
Edition 2005.07.06
Language English
17
GB
WIRING DIAGRAMS
4. WIRING DIAGRAMS:
Service Manual Aqualtis - 2005
Edition 2005.07.06
Language English
18
WIRING DIAGRAMS
GB
Service Manual Aqualtis - 2005
Edition 2005.07.06
Language English
19
GB 5. TECHNICAL ASSISTANCE: 5.1. DEMO MODE: It is available only on models with LCD and Display interface. Activation:
Power On + Start/Reset + 4th button at the lower part for 6 seconds.
Deactivation:
Power On + Start/Reset for 3 seconds.
5.2. AUTO TEST (TESTING / RUNNING_IN): The Hardware Key permits the execution of the platform EVO II Auto Test program. On the hardware key switches on a BLUE LED, indicating it is an EVO II washing machine. A flashing RED led on the key (when it is connected with the appliance) indicates that the electronic board is communicating with the hardware key. If the hardware key does not succeed in connecting with the washing machine, the message “ERR” will flash on the display
Initial conditions to start Auto Test: 1.
Washing machine without water in the tank.
2. Door closed.
Remember that the Auto Test program activates the heater to warm up water and controls the spin; so it is necessary to select a temperature higher than 30°C and not to exclude the spin. To start the AUTO-TEST program, press and leave the button marked as AUTO-TEST. A soundsignal will be given out and on the display will slide the writing “AUTO-TEST”.
ASSISTANCE
3. Switch on the washing machine and fit the key on the suitable housing.
Auto Test sequence for Washing Machines and Washer Dryer - Loading of wash solenoid valve for 10" ca. - Loading of pre-wash solenoid valve for 10" ca. - Loading of hot water solenoid valve for 10" ca (in machines equipped with this solenoid valve). - Motor movement on both directions. - Activation of the wash heater: warming up to the temperature of 30°C. - Drain and spin. -
Stop.
NOTICE!! If now the washing machine works correctly, but previously it has had a FAULT, it will not start up the AUTO-TEST program, but such a FAULT will be surely shown on the display of the hardware key. In this case, to start up the “Auto-test” program is necessary to remove the hardware key.
Service Manual Aqualtis - 2005
Edition 2005.07.06
Language English
20
GB 5.3. FAULT ANALYSIS & SOLUTIONS: SIMBOLS: LED 5 LED 4 LED 3 LED 2 LED 1
led ON
led OFF
LED COMBINATION FAULT
CAUSE
F01
Motor piloting triac shor t circuited
LED 5
LED 4
LED 3
LED 2
LED 1
F02
Motor blocked, motor tacho open / short circuited
LED 5
LED 4
LED 3
LED 2
LED 1
F03
Wash NTC probe open / short circuited
LED 5
LED 4
LED 3
LED 2
LED 1
F04
“Empty” + pressure switch overflow simultaneously
LED 5
LED 4
LED 3
LED 2
LED 1
F05
“Empty” pressure switch not reached, drain pump clogged
LED 5
LED 4
LED 3
LED 2
LED 1
F07
No absor ption of the wash heater
LED 5
LED 4
LED 3
LED 2
LED 1
F08
Wash heater relay welded to the NA/NC contact
LED 5
LED 4
LED 3
LED 2
LED 1
F09
Fault of setup file (EEPROM not programmed or not working)
LED 5
LED 4
LED 3
LED 2
LED 1
F10
No signal of simultaneous “full” and “empty”
LED 5
LED 4
LED 3
LED 2
LED 1
F11
No supply to the drain pump
LED 5
LED 4
LED 3
LED 2
LED 1
F12
No communication between display board and control board
LED 5
LED 4
LED 3
LED 2
LED 1
F18
Faulty communication between Microprocessor and DSP (Digital Signal Processor).
LED 5
LED 4
LED 3
LED 2
LED 1
Service Manual Aqualtis - 2005
Edition 2005.07.06
ASSISTANCE
TEMPERATURE LED
Language English
21
GB The models equipped with LCD and DIGIT interface allows to read the code of the fault occurred in the washing machine on the display (example: F-08).
CAUSE
CHECK-UP -
F01
Motor piloting triac short circuited
-
F02
Motor blocked, motor tacho open / short circuited -
F03
F04
Wash NTC probe open / shor t circuited or wash heater relay welded (signalled with full pressure switch) “Empty” + pressure switch overflow simultaneously. If pressure switch contact is fixed on “empty”, the WM fills water up to reach the overflow. The drain pump is automatically activated by the overflow contact.
-
F05
“Empty” pressure switch not reached.
-
F07
No absorption of the wash heater (signalled only by “empty” pressure switch).
-
Service Manual Aqualtis - 2005
Check eventual leaks of water which may involve the J9 connector, short-circuiting its contacts; Check motor terminal board (problem caused by the eventual aggression of working - chemical residues, which may produce a s.c.); Replace the board Verify if the motor is blocked; Check the tacho winding verifying that on J9 wiring connector between the pins 1 and 2 is shown a resistance value included between 115 and 170 . In case of s.c. or open contact, check the wiring between the pins 1 and 2 of J9 relative to the tacho. In case of a tri-phase motor, verify that between the pins 6 and 7 of J9 there is ohm-continuity; Replace motor; Replace board Check the efficiency of the contacts of J3 connector on the board; Check the state of the pressure switch verifying ohm-continuity on J3 wiring connector, pins 2 and 4 (only with empty tank) and pins 2 and 1 (only with water in the tank, over half door glass level); Check wiring of J3 connector/pressure switch; Replace pressure switch; Replace board. Check the efficiency of the contacts of J9 on the board, verifying that between pins 8 and 9 the tension is 220 V; Verify that the pump is supplied; Check pump filter + wall-drain; Replace pump; Replace board.
Check the efficiency of the contacts of J8 connector on the board; Check NTC verifying that on J8 wiring connector, pins 11 and 12 the resistance value at room temperature is about 20 k; If the measure is wrong, check wiring continuity J8/NTC. Check directly on NTC this same parameter. Replace NTC; Replace board. Check the efficiency of the contacts of J3 connector on the board; Check on J3 connector, pins 5 and 6 the continuity of the wash heater. The heater is of 1800W 230V and has a value of 25 ; Check pressure switch, connector J3 pins 2 and 3: there must be no ohm-continuity (main contact with “full”); Check pressure switch, connector J3 pins 2 and 3: there must be ohm-continuity; Replace pressure switch; Replace heater Replace board
Edition 2005.07.06
ASSISTANCE
FAULT
Language English
22
GB
CAUSE
F08
Wash heater relay welded (signalled in presence of “empty”) or pressure switch fixed on “empty” (empty and full simultaneously).
F09
Fault of setup file (EEPROM not programmed or not working)
CHECK-UP -
-
F10
No signal of simultaneous “full” and “empty” -
F11
F12
F18
Service Manual Aqualtis - 2005
No pump feedback (drain pump disconnected or winding interrupted). No communication between display board and control board
Faulty communication between Microprocessor and DSP (Digital Signal Processor).
-
Check the efficiency of the contacts of J3 connector on the board; Check the state of the pressure switch verifying ohm-continuity on J3 wiring connector, pins 2 and 4 (only with empty tank), pins 2 and 3 (only with water in the tank) and pin 2 and 1 (only with water in the tank over half door glass level); Ambient with a high rate of humidity; In case of board with EEPROM welded on it, replace board and EEPROM; In case of spare EEPROM, check the correct fitting of the EEPROM in the socket of the board. Check the efficiency of contact on J3connector on the board; Check the state of the pressure switch, verifying the ohm-continuity on the wiring connector J3 pins 2 and 4 (it must be present with empty tank only) and pins 2 and 1 (it must be present with water in tank over half door glass level); Check the wiring of J3-connector/pressure switch; Replace pressure switch; Replace board. Check the efficiency of the contacts of J9-connector on the board; Verify on J15 connector, pins 1 and 2 (in case of wm with Easy Door door lock) or on J9 connector, pins 8 and 9 (in case of general door lock) the continuity of the pump, checking the resistance value 170 ; Check the wiring of the J15 connector (or J9)/pump; Replace pump; Replace board.
-
Check efficiency of contacts of the J11 connector on the board; Check the continuity of J11-connector/5-output connector of the display board; Replace main board;
-
Replace board display
Edition 2005.07.06
ASSISTANCE
FAULT
Language English
23
GB 5.4. DOCTOR: The main board is installed on the back part, on the right. The interface, protected by a cover, allows the connection of the hardware key to the machine: * Connect the handheld to the hardware key; * Follows the instruction in the “WM DOCTOR” manual.
5.5. TROUBLE SHOOTING:
It does not switch on It does not fill itself with water It continuously fills it- self with water The motor does not run The drum does not rotate It does not drain -
Service Manual Aqualtis - 2005
ANALISYS
Check the socket. Verify if the door closes the safety switch. Door micro door-lock Display board Tap closed or low pressure Solenoid valve clogged Solenoid valve not supplied Solenoid valve broken Drain tube too low Check pressure switch Air trap or pressure switch tube Check pressure switch Check motor winding Motor terminal box or board The motor is not under tension Check driving belt Check the motor Function excluded Check drain pump and filter Check drain pump tension Verify if the program provides drain block Check wall-drain
Edition 2005.07.06
ASSISTANCE
PROBLEM
Language English
24
GB
PROBLEM
It does not wash well
ANALISYS
- Wrong wash temperature - Lack of a detergent - The program selected is not the right one - Too much detergent
Presence of foam at the - Faulty drain end of the wash - The presence of foam is normal, because of the presence of zeolites
Noisy spin
-
Unbalanced load Check bearing Belt worn-out Loose wash paddles Loose counterweight
Loss of current
- Check earth-drain - Anti-noise filter
ASSISTANCE
The motor performs - Load too much unbalanced - False contacts in the terminal box washes but not spins
Service Manual Aqualtis - 2005
Edition 2005.07.06
Language English
25
GB 5.5 ASSEMBLY & DISASSEMBLY: Disassembly of the Drum: To demount the drum, follow the same procedure as in the previous models of washing machine. In assembling it, there is something different: make
sure to fit the spring supporting the drum in the right position (5°-inclined) in order to maintain the drum in the correct position and inclination.
Disassembly of the Door:
ASSISTANCE
2. Remove the screws fixing the hinges to the front panel side (the hinges are components of the drum assembly).
1. Take off the cable of the display board.
3. Unhook hinges and pull away the cable.
Service Manual Aqualtis - 2005
Edition 2005.07.06
Language English
26
GB Disassembly of the Drum tube & Oko gasket:
ball and in the drum there is the Oko soundproof rubber ring.
1. Remove the screw fixing the tube to the drum.
2. Pull back the tube; inside of it there is the Oko
3. Remove the rubber ring.
Disassembly of the Display board:
2. Remove 5 screws in the back part of the panel and remove the cover.
Service Manual Aqualtis - 2005
ASSISTANCE
1. Open the door.
3. Remove the hooks fixing the board on its right side, by pushing lightly the knob.
Edition 2005.07.06
Language English
27
GB
5. Remove the connector of the board.
6. Remove the buttons.
To dismantle the components listed below, follow the same procedure as on the former models of washing machine:
9.
1. Disassembly of the Belt. 2.
Disassembly of the Motor.
3.
Disassembly of the Drain pump.
4.
Disassembly of the Top.
5.
Disassembly of the Back Cover
6.
Disassembly of the Main Board.
7.
Disassembly of the Anti-noise Filter
8.
Disassembly of the Pulley
Service Manual Aqualtis - 2005
ASSISTANCE
4. Unhook the left side of the board to completely remove it from its housing.
Disassembly of the Shock Absorbers.
10. Disassembly of the Heater. 11. Disassembly of the Door Gasket
Edition 2005.07.06
Language English
28
GB 6. EXPLODED VIEW: CABINET - LCD AESTHETIC. 18
17 19 1
2
16 3
15 14
4
13 12 11 10 9
5 6 7
Ref. Item 000 000 001 002 003 004 009 010 011 012
AQUALTIS QUICK GUIDE HANDBOOK IT CONTROLS COVER AQUA ASSY MODULE LCD DISPLAY AQUALTIS KNOB LCD DISPLAY AQUALT FULL DOOR ASSY AQXD AQUALTIS WHITE PLINTH AQUALTIS ADJUSTABLE FOOT + SPRING M8 H = 2,3 CM FOOT SPRING D =11 MM H = 8,5 MM WHITE CABINET PW ARIS.AQUALTIS CERN.150°
Service Manual Aqualtis - 2005
Ref. Item 013 014 015 016 017 017 018 019 020 021
DRAIN TUBE COLLAR ‘AB636TX’ HARDWARE RUNNING-IN CAP FOR CABINET ‘LBE8X’ SUMP HANDLE AQUALTIS BACK PANEL B PW CON BUGNA WIRING CLIP ‘AB636TX’ DRAIN TUBES SUPPORT ‘WM2000’ WHITE TOP AQUALTIS RIGHT/LEFT SOUND-PROOF PANEL FRONTAL SOUND-PROOF PANEL AQUA HINGE SCREW AQUAL
Edition 2005.07.06
EXPLODED
VIEWS
8
Language English
29
GB CABINET - DISPLAY AESTHETIC 18
17 19 1
2
16 3
15 14
4
13 12 11 10 9
5 6 7
Ref. Item 001 SCREW FOR COUNTERWEIGHT/TANK AQUALT 003 UPPER COUNTERWEIGHT VPL 13KG AQUAL 004 SPRING RING NUT AQUAL 005 TANK WHITE SPRING 8,5 SPIRE AQUAL 006 PLASTIC TANK ASSY. 62 L H=20 MM AQUAL 007 BACK SPRING TIGHT RING AQUAL 008 DOOR GASKET AQUALTIS 009 FRONT RING AQUALTIS 010 FRON COUNTERWEIGHT VPL 9,4KG 011 OKO TUBE BALL EVO II 013 DRAIN BELLOWS AQUALTIS 014 PIPE-CLIP BAND DRAIN PUMP SIDE 015 PIPE-CLIP BAND PRESSURE SWITCH
Service Manual Aqualtis - 2005
Ref. Item 016 PIPE-CLIP BAND TANK SIDE 019 BELLOWS DRAIN GASKET OKO AQUAL 020 EXPANDER 021 NUT ROMOB M6X20X1,6 022 SHOCK ABSORBER 100 N INCL. 023 BELLOWS DETERGENT FILLING AQUALTIS 024 DUCT PULLEY D=280 MM H=20 MM 025 SCREW M8X23 TEFL’AL68X’ 026 ELASTIC BELT AQUAL 027 VIOLET TANK SPRING 10,5 SPIRE AQUAL 028 SCREW TORX M8 X 27 DRI-LOC’ALS748TX’ 028 EXTRACTABLE WASH PADDLE DRUM. 46L
Edition 2005.07.06
EXPLODED
VIEWS
8
Language English
30
GB CABINET - LED AESTHETIC 18
17 19 1
2
16 3
15 14
4
13 12 11 10 9
5 6 7
Ref. Item 000 000 001 002 003 004 009 010 011 012
AQUALTIS QUICK GUIDE HANDBOOK IT CONTROLS COVER AQUA ASSY MODULE LCD DISPLAY AQUALTIS KNOB LCD DISPLAY AQUALT FULL DOOR ASSY AQXD AQUALTIS WHITE PLINTH AQUALTIS ADJUSTABLE FOOT + SPRING M8 H = 2,3 CM FOOT SPRING D =11 MM H = 8,5 MM WHITE CABINET PW ARIS.AQUALTIS CERN.150°
Service Manual Aqualtis - 2005
Ref. Item 013 014 015 016 017 017 018 019 020 021
DRAIN TUBE COLLAR ‘AB636TX’ HARDWARE RUNNING-IN CAP FOR CABINET ‘LBE8X’ SUMP HANDLE AQUALTIS BACK PANEL B PW CON BUGNA WIRING CLIP ‘AB636TX’ DRAIN TUBES SUPPORT ‘WM2000’ WHITE TOP AQUALTIS RIGHT/LEFT SOUND-PROOF PANEL FRONTAL SOUND-PROOF PANEL AQUA HINGE SCREW AQUAL
Edition 2005.07.06
EXPLODED
VIEWS
8
Language English
31
GB DRUM ASSEMBLY. 1 26 3 25
4
24
5 6
7 23
27
8 9
22 20
28
19
21
1
11
10
16 13
15
14
VITE AUTORASCHIANTE 3,5X8 TRIFOIL DENT SUPPLY CABLE. 3 x 1.5 1,5MT SHUKO TRIF. SPIRALLED SUPPORT FOR DRAIN TUBE DRAIN TUBE USA WASHING MACHINES PH HOPPER COVER PRESSURE SWITCH SUPPORT ‘LB818’ PRESSURE SWITCH 1 L. 78-50 ANTITR. 310 PIPE-CLIP BAND PRESSURE SWITCH AIR TRAP TUBE 470 EVO II INDUCTANCE AQUALTIS FIXING SCREW MOTOR/TANK THREE-PHASE MOTOR CIM2-55 AD6 AQUALTIS DRAIN PUMP 220-240V./50HZ AQUA FILTER HANDLE ASKOLL/PLASET’044998' PUMP FILTER KIT ASKOLL/PLASET’044998' FILTER GASKET ASKOLL/PLASET’044998' EEPROM AQXD169IT S/W 28376570000 THREE PHASE MODULE .NO EEPROM RESINED AQUALTIS EXTRACTING PLIERS INTEGRATED LB2000’ELCART
Service Manual Aqualtis - 2005
019 019 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036
n1040317 SERIAL KEY EVOII - LB2000 - PC SERIAL CABLE WM2000 EVOII-PC MASC/FEMM HEATER WITH THERMOF.2000W/230V L=190MM TEMPERATURE SENSOR NTC ELTH TL PH2001 HOPPER AQUALTIS EXTRACTOR DETERGENT DRAWER.AQUALTIS COMMON DETERGENT DRAWER AQUALTIS ADDITIVES COVER AQUALTIS ADDITIVES TRAY DRAWER AQUALTIS DETERGENT DISPENSER BLUE CAP TIE DOOR OPENING AQUALTIS MICRO DOOR LOCK AQUALTIS INLET TUBE 1500 MM ‘BENT SIDE’ SOLENOID VALVE IE2U 7 LT.RST 2,5 230 V HOPPER GASKET ‘WM2000’ INLET TUBE GASKET INLET TUBE FILTER SOLENOID VALVE SUPPORT 1 EV’LVB2000'
Edition 2005.07.06
VIEWS
001 002 003 004 005 006 007 008 009 012 013 014 015 016 016 016 017 018 019
Ref. Item
EXPLODED
Ref. Item
Language English
32
GB
EXPLODED
VIEWS
ELECTRICAL AND ELECTRONICAL COMPARTMENTS.
Ref. Item 001 BASIC WIRING D 24000096600 002 WIRING ML + PS 240000700L0 003 WIRING THREE-PHASE EARTH 240000700Y0
Service Manual Aqualtis - 2005
Ref. Item 004 WIRING EVL + EVP 240000700C1 005 WIRING DISPLAY COMMUNICATION 240000700B1 006 BASIC WIRING A 24000096600
Edition 2005.07.06
Language English
33
GB 7. APPENDX: Wash data table: Name
White cotton
Standard Mini Load Super Wash Easy Iron Extra Rinse Standard Super Wash Easy Iron Mini Load Extra Rinse Standard Mini Load Super Wash Easy Iron Extra Rinse Standard Mini Load Super Wash Easy Iron Extra Rinse Standard Mini Load Easy Iron Standard Mini Load Easy Iron Super Wash Extra Rinse Standard Mini Load Super Wash Easy Iron Extra Rinse Standard Mini Load Super Wash Easy Iron Extra Rinse Standard Mini Load Extra Rinse Easy Iron Standard Mini Load Extra Rinse Standard Mini Load Extra Rinse Easy Iron Standard Mini Load Super Wash Easy Iron Extra Rinse
Coloured cotton
Delicate Synthetics
Mix 30' (ex-daily)
Pre-washed Cottons
Durable Synthetics
Shirts
Silk
Wool
Duvets
Bed & Bath
Service Manual Aqualtis - 2005
Temperature Max load kg Energy kwh/kg 60°C 60°C 60°C 60°C 60°C 90°C 90°C 90°C 90°C 90°C 40° 40° 40° 40° 40° 40° 40° 40° 40° 40° 28°C 28°C 28°C 90° 90° 90° 90° 90° 60° 60° 60° 60° 60° 35°C 35°C 35°C 35°C 35°C 28°C 28°C 28°C 28°C 40°C 40°C 40°C 30°C 30°C 30°C 30°C 50°C 50°C 50°C 50°C 50°C
7,5 3,5 7,5 7,5 7,5 7,5 7,5 7,5 3,5 7,5 7,5 3,5 7,5 7,5 7,5 3,5 1,5 3,5 3,5 3,5 3,5 1,5 3,5 7,5 3,5 7,5 7,5 7,5 3,5 1,5 3,5 3,5 3,5 2,1 1 2,1 2,1 2,1 2 1 2 2 2 1 2 3 1,5 3 3 7,5 3,5 7,5 7,5 7,5
Wash R.W.
Tot time min
0,18 0,22 0,26 0,18 0,18 0,30 0,40 0,30 0,45 0,30 0,11 0,15 0,16 0,11 0,12 0,13 0,23 0,19 0,11 0,14 0,05 0,05 0,05 0,36 0,37 0,36 0,41 0,36 0,22 0,38 0,32 0,20 0,23 0,37 0,47 0,40 0,37 0,37 0,20
1,026 1,025 1,045 n.r. n.r. 1,04 1,08
129 100 149 150 145 148 169
84 53 98 84 84 96 116
22,4 13,6 26,3 22,4 22,4 22,2 26,6
72 53 74 94 96 73,7 82,1
1,07 n.r. 0,90 0,92 0,94 n.r. n.r. 0,86 0,91 0,95 n.r. n.r. n.r.
132 164 95 83 100 107 111 70 67 85 83 81 33
78 96 45 40 53 45 45 33 24 48 31 33 15
15,1 22,2 22 14 27 22 22 12,6 9,5 17,4 14 13 13
57,8 97,7 71 55,6 78,9 92 95 53,5 33 58,4 79 77 52
n.r. 1,05 1,09
33 175 136
15 123 97
13 31,5 20,5
54 85 59
1,09 n.r. 0,97 1,01 1,09 n.r. n.r. 0,80 0,78 0,83 n.r. n.r. n.r.
190 191 85 72 108 98 96 75 70 78 73 85 53
135 123 52 39 67 50 52 43 37 45 39 43 31
32 31,5 12,5 9,2 16,3 14 13 36 26,1 36,6 35,3 36 27,5
87 109 53,5 31,5 56,4 79 78 82,7 73,2 83,6 83,8 103 106
0,20 0,20 0,20 0,35 0,20 0,12 0,20 0,12 0,12 0,20 0,24 0,22 0,20 0,20
n.r. n.r. n.r. n.r. n.r. n.r. n.r. n.r. n.r. 0,97 1,03 1:01
59 53 65 59 75 74 69 88 80 112 104 123
31 31 24 24 24 34 26 34 29 63 48 74
27,5 27,5 12,5 10,6 12,5 19,6 13,5 19,6 20,4 26,4 15,1 27
126 106 84 72,5 99 96,6 65,2 122 99 90,8 63,1 91,3
n.r.
125
63
26,4
110
Edition 2005.07.06
Wash time Wash water Tot water min lt lt
APPENDIX
No.
Language English
34
Service Manual Aqualtis - 2005
Edition 2005.07.06
APPENDIX
Diagram: Wash cycle at 60°C + Super Wash
Diagram: Standard wash 60°C - Aqualtis
PROGRAM DIAGRAMS
GB
Language English
35
Service Manual Aqualtis - 2005
Edition 2005.07.06
-
Prec
90" Imbib.
4"off - 6" on 4"off - 11" on 25 rpm
APPENDIX
Movimento
Fase
°C 60 55 50 45 40 35 30 25 20 15 10
Scalda 24°C carica 1 lt 4"off - 6" on 4"off - 11" on 25 rpm carica 1 lt
Scalda 40°C 2"off - 13" on 40 rpm
Scalda 28°C 4"off - 6" on 4"off - 11" on 25 rpm stand 5'
40°C
2"off - 13" on 40 rpm
4' Mecc.
2"off 13" on 40 rpm
Scalda 41°C
Diagram: Standard wash cycle at 40°C - Aqualtis
Diagram: “Miniload” wash cycle
2' Mecc. 2"off 13" on 40 rpm
41°C
2"off 13" on 40 rpm
Scalda 41°C
41°C
2"off - 13" on 40 rpm
12' Meccanico
Scarica
Scarica
GB
Language English
36
Service Manual Aqualtis - 2005
-
Prec
4"off - 6" on 4"off - 11" on 25 rpm
90" Imbib.
Scalda 24°C carica 1 lt 4"off - 6" on 4"off - 11" on 25 rpm carica 5,5 lt 4"off - 6" on 4"off - 11" on 25 rpm
Scalda 28°C 2"off - 13" on 40 rpm
Scalda 40°C
40°C
2"off - 13" on 40 rpm
6' Mecc.
Edition 2005.07.06
-
Prec
90" Imbib.
4"off - 6" on 4"off - 11" on 25 rpm
APPENDIX
Movimento
Fase
°C 60 55 50 45 40 35 30 25 20 15 10
Scalda 28°C 4"off - 6" on 4"off - 11" on 25 rpm stand 5'
28°C
2"off - 13" on 40 rpm
Scalda 40°C
40°C
4' Mecc. 2"off - 28" on 40 rpm
on 40 rpm
28"
Scalda 41°C 2"off -
2' Mecc.
5' Mecc.
Scalda 41°C
41°C
6"off 9" on 40 rpm
2"off 28" on 40 rpm
Scalda 41°C
6"off 9" on 40 rpm
41°C
28" on 2"off 40 rpm
41°C
2"off 13" on 40 rpm
Scalda 41°C
Diagram: Mini Load wash cycle at 40°C - Aqualtis
Movimento
Fase
°C 60 55 50 45 40 35 30 25 20 15 10
Diagram: Super Wash cycle at 40°C - Aqualtis
Scal.41°C
2"off - 28" on 40 rpm
5' Meccanico
Scarica
Scarica
2"off 13" on 40 rpm
7' Mecc.
41°C
Scarica
9" 6"off 9" 6"off on on 40 rpm 40 rpm
2' Mecc.
41°C
GB
Language English
37
Service Manual Aqualtis - 2005
Mec.10'
6"off - 9" on 6"off - 9" on 40 rpm
Ris. 27°
4"off - 6" on 4"off - 11" on 25 rpm
27°C
-
Prec
4"off - 6" on 4"off - 11" on 25 rpm
90" Imbib.
Scalda 24°C 4"off - 6" on 4"off - 11" on 25 rpm carica 1 lt
Scalda 40°C 6"off - 9" on 6"off - 9" on 40 rpm
Scalda 30°C 4"off - 6" on 4"off - 11" on 25 rpm stand 3' 6"off - 9" on 6"off - 9" on 40 rpm
4' Bio
40°C
6"off - 9" on 6"off - 9" on 40 rpm
Ris. a 50°C
Edition 2005.07.06
Fase
Movimento
Prec
-
Mec.10'
6"off - 9" on 6"off - 9" on 40 rpm
Ris. 27°
4"off - 6" on 4"off - 11" on 25 rpm
27°C
APPENDIX
°C 90 80 70 60 55 50 45 40 35 30 25 20 15 10
90" Imbib.
4"off - 6" on 4"off - 11" on 25 rpm
Scalda 24°C 4"off - 6" on 4"off - 11" on 25 rpm carica 5,5 lt
Scalda 30°C 4"off - 6" on 4"off - 11" on 25 rpm stand 3'
4' Bio 6"off - 9" on 6"off - 9" on 40 rpm
Scalda 40°C 6"off - 9" on 6"off - 9" on 40 rpm
40°C
6"off - 9" on 6"off - 9" on 40 rpm
Ris. a
82°C
6"off - 9" on 6"off - 9" on 40 rpm
5' Meccanico
50°C
6"off - 9" on 6"off - 9" on 40 rpm
Risc.82°C
Diagram: Super Wash Cotton Wash Cycle at 90°C - Aqualtis
Movimento
Fase
°C 90 80 70 60 55 50 45 40 35 30 25 20 15 10
Diagram: Standard Cotton Wash Cycle at 90°C - Aqualtis
6"off - 9" on 6"off - 9" on 40 rpm
7' Meccanico
6"off - 9" on 6"off - 9" on 40 rpm
Risc.72°C
72°C
Risc.82°C
a fermo
82°C
82°C
6"off - 9" on 6"off - 9" on 40 rpm
6"off - 9" on 6"off - 9" on 40 rpm
82°C
17' Meccanico
6"off - 9" on 6"off - 9" on 40 rpm
8' Meccanico
Scarica
Scarica
GB
Language English
38
Service Manual Aqualtis - 2005
Prec
-
Mec.10'
6"off - 9" on 6"off - 9" on 40 rpm
Ris. 27°
4"off - 6" on 4"off - 11" on 25 rpm
27°C
90" Imbib. 4"off - 6" on 4"off - 11" on 25 rpm
Scalda 30°C 4"off - 6" on 4"off - 11" on 25 rpm stand 3' 4' Bio 6"off - 9" on 6"off - 9" on 40 rpm
Scalda 40°C 6"off - 9" on 6"off - 9" on 40 rpm
Ris. a 50°C 6"off - 9" on 6"off - 9" on 40 rpm
Edition 2005.07.06
90" Imbib.
4"off - 6" on 4"off - 11" on 25 rpm
Prec
-
APPENDIX
Movimento
Fase
°C 90 80 70 60 55 50 45 40 35 30 25 20 15 10
Scalda 24°C 4"off - 6" on 4"off - 11" on 25 rpm carica 1 lt
Scalda 30°C 4"off - 6" on 4"off - 11" on 25 rpm stand 3'
5' Meccanico 6"off - 9" on 6"off - 9" on 40 rpm
Ris. a 6"off - 9" on 6"off - 9" on 40 rpm
4' Bio 6"off - 9" on 6"off - 9" on 40 rpm
Scalda 40°C 6"off - 9" on 6"off - 9" on 40 rpm
50°C
6"off - 9" on 6"off - 9" on 40 rpm
Risc.72°C
72°C
a fermo
82°C
82°C
Risc.72°C 6"off - 9" on 6"off - 9" on 40 rpm
6"off - 9" on 6"off - 9" on 40 rpm
72°C
4' Meccanico
50°C
Diagram: Standard Cotton Wash Cycle at 90°C - Aqualtis
Movimento
Fase
°C 90 80 70 60 55 50 45 40 35 30 25 20 15 10
Diagram: Mini Load Cotton Wash Cycle at 90°C - Aqualtis
a fermo
82°C
82°C
6"off - 9" on 6"off - 9" on 40 rpm
17' Meccanico
6"off - 9" on 6"off - 9" on 40 rpm
17' Meccanico
Scarica
GB
Language English
39
Service Manual Aqualtis - 2005
-
Prec
Scalda 40°C 6"off - 9" on 6"off - 9" on 40 rpm
Scalda 30°C 4"off - 6" on 4"off - 11" on 25 rpm stand 3'
Scalda 24°C
4"off - 6" on 4"off - 11" on 25 rpm carica 5,5 lt
90" Imbib.
4"off - 6" on 4"off - 11" on 25 rpm
6"off - 9" on 6"off - 9" on 40 rpm
4' Bio 6"off - 9" on 6"off - 9" on 40 rpm
Ris. a 50°C
50°C
6"off - 9" on 6"off - 9" on 40 rpm
Risc.82°C
72°C
Edition 2005.07.06
-
Prec
4"off - 6" on 4"off - 11" on 25 rpm
90" Imbib.
APPENDIX
Movimento
Fase
°C 90 80 70 60 55 50 45 40 35 30 25 20 15 10
Scalda 30°C 4"off - 6" on 4"off - 11" on 25 rpm stand 3'
4' Bio 6"off - 9" on 6"off - 9" on 40 rpm
Scalda 40°C 6"off - 9" on 6"off - 9" on 40 rpm
Risc.72°C 6"off - 9" on 6"off - 9" on 40 rpm
4' Meccanico 6"off - 9" on 6"off - 9" on 40 rpm
Ris. a 50°C 6"off - 9" on 6"off - 9" on 40 rpm
50°C
72°C
a fermo
82°C
6"off - 9" on 6"off - 9" on 40 rpm
7' Meccanico
82°C
82°C
Diagram: Mini Load Cotton Wash Cycle at 90°C - Aqualtis
Movimento
Fase
°C 90 80 70 60 55 50 45 40 35 30 25 20 15 10
Diagram: Super Wash Cotton Wash Cycle at 90°C - Aqualtis
6"off - 9" on 6"off - 9" on 40 rpm
17' Meccanico
6"off - 9" on 6"off - 9" on 40 rpm
Risc.82°C
82°C
Scarica
6"off - 9" on 6"off - 9" on 40 rpm
8' Meccanico
Scarica
GB
Language English
40
Service Manual Aqualtis - 2005
-
Prec
Ris.40°C
2"off -13" on 40 rpm
Ris.30°C
carica 3lt 4"off - 6" on 4"off - 11" on 25 rpm stand 5'
90" Imbib.
4"off - 6" on 4"off - 11" on 25 rpm
53°C
2"off -13" on 40 rpm
Risc. A 53°C - 20' Mec.
Edition 2005.07.06
-
Prec Ris.56°C
2"off -13" on 40 rpm
Ris.30°C
carica 4,5 lt 4"off - 6" on 4"off - 11" on 25 rpm stand 5'
90" Imbib.
4"off - 6" on 4"off - 11" on 25 rpm
APPENDIX
Movimento
Fase
°C 60 55 50 45 40 35 30 25 20 15 10
Diagram: Super Wash cycle at 60°C - Aqualtis
Movimento
Fase
10
15
20
25
30
35
40
45
50
55
60
°C
Scarica
2"off -13" on 40 rpm
Mec.10'
56°C
Diagram: Standard Synthetics Wash cycle at 60°C - Aqualtis
6"off -9" on 40 rpm
Ris.57°C
57°C
S ca r i c a
2"off -13" on 40 rpm
Mec.20'
GB
Language English
41
Service Manual Aqualtis - 2005
-
Prec
90" Imbib. 4"off - 6" on 4"off - 11" on 25 rpm
Ris.30°C 4 off - 6 on 4"off - 11" on 25 rpm stand 5' 2"off -13" on 40 rpm
2"off -13" on 40 rpm
Edition 2005.07.06
-
Prec
APPENDIX
Movimento
Fase
°C 60 55 50 45 40 35 30 25 20 15 10 Ris.40°C
2"off -13" on 40 rpm
Ris.30°C
carica 1lt 4"off - 6" on 4"off - 11" on 25 rpm stand 5'
90" Imbib.
4"off - 6" on 4"off - 11" on 25 rpm
30°C
40°C
2"off -13" on 40 rpm
15' Mec.
Risc. 53°C - 10' Mec.
Ris.40°C
53°C
Diagram: Synthetics Wash cycle at 40°C
Movimento
Fase
°C 60 55 50 45 40 35 30 25 20 15 10
Scarica
Scarica
Diagram: Mini Load Synthetic Wash cycle at 60°C - Aqualtis
GB
Language English
42
Service Manual Aqualtis - 2005
-
Prec
2"off -13" on 40 rpm
carica 4,5lt 4"off - 6" on 4"off - 11" on 25 rpm stand 5'
4"off - 6" on 4"off - 11" on 25 rpm
Edition 2005.07.06
-
Prec
APPENDIX
Movimento
Fase
°C 60 55 50 45 40 35 30 25 20 15 10
90" Imbib. 4"off - 6" on 4"off - 11" on 25 rpm
Ris.30°C 4"off - 6" on 4"off - 11" on 25 rpm
2"off -13" on 40 rpm
2"off -13" on 40 rpm
2"off -13" on 40 rpm
5' Mec.
7' Mec.
40°C
40°C
Ris.40°C
30°C
Ris.40°C
Ris.28°C
28°C
90" Imbib.
Diagram: Mini Load Wash cycle
Movimento
Fase
°C 60 55 50 45 40 35 30 25 20 15 10
Diagram: Super Wash cycle
Scarica
2"off -13" on 40 rpm
Ris.40°C
40°C
2"off -13" on 40 rpm
5' Mec.
Scarica
GB
Language English
43
Service Manual Aqualtis - 2005
-
Prec
90" Imbib. 4"off - 6" on 4"off - 11" on 25 rpm Scalda 35°C 14"off - 16" on 14"off - 16" on 55 rpm
35°C
14' Meccanico 14"off - 16" on 14"off - 16" on 55 rpm
Scarica
Edition 2005.07.06
-
Prec
APPENDIX
Movimento
Fase
60 55 50 45 40 35 30 25 20 15 10
°C
Scalda 28°C - 5' Mecc. 4"off - 6" on 4"off - 11" on 25 rpm
28°C
2"off 13" on 40 rpm
3' Mecc.
Scarica
Scarica
Diagram: Standard Mix30' Wash cycle at 30°C - Aqualtis
“Shirts” with “Mini Load” and “Super Wash” options: it is the same of the standard cycle, the difference consists in the quantity of water used during the wash. The standard cycle requires additional 20 lt of water, instead of 18 lt of Mini Load and 28 lt of Super Wash.
Movimento
Fase
°C 60 55 50 45 40 35 30 25 20 15 10
Diagram: “Shirts” Wash cycle
GB
Language English
44
Service Manual Aqualtis - 2005
56"off - 4" on
12"off - 4" on 12"off - 4" on 25 rpm
25 rpm
Ris.28°C
Imbib.
28°C
12"off -4" on 25 rpm
12' Mec.
Scarica
Edition 2005.07.06
4"off - 6" on 4"off - 11" on 25 rpm
Prec.-90" Imbib.
APPENDIX
Movimento
Fase
60 55 50 45 40 35 30 25 20 15 10
°C
Scalda 24°C 4"off - 6" on 4"off - 11" on 25 rpm carica 1 lt
Ris.40°C 2"off - 13" on 2"off - 13" on 40 rpm
Scalda 28°C 4"off - 6" on 4"off - 11" on 25 rpm
40°C
2"off -13" on 40 rpm
4' Mec.
2"off -28" on 40 rpm
Ris.52°C
Diagram: Bed & Bath wash cycle with “Mini Load” - Aqualtis
Movimento
Fase
10
15
20
25
30
35
40
45
50
55
°C 60
Diagram: Silk wash cycle - Aqualtis
52°C
2"off -13" on 40 rpm
6' Mec.
Scarica
GB
Language English
45
Service Manual Aqualtis - 2005
4"off - 6" on 4"off - 11" on 25 rpm
Prec.-90" Imbib.
Scalda 24°C 4"off - 6" on 4"off - 11" on 25 rpm carica 5,5 lt 4"off - 6" on 4"off - 11" on 25 rpm
Scalda 28°C 2"off - 28" on 2"off - 28" on 40 rpm
Ris.40°C
40°C
2"off -13" on 40 rpm
3' Mec.
Edition 2005.07.06
Prec.-90" Imbib. 4"off - 6" on 4"off - 11" on 25 rpm
APPENDIX
Movimento
Fase
60 55 50 45 40 35 30 25 20 15 10
°C
Scalda 24°C 4"off - 6" on 4"off - 11" on 25 rpm
Scalda 28°C 4"off - 6" on 4"off - 11" on 25 rpm
Ris.40°C 4"off - 6" on 4"off - 11" on 25 rpm
40°C
2"off -13" on 40 rpm
3' Mec.
Diagram: Bed & Bath wash cycle - Aqualtis
Movimento
Fase
60 55 50 45 40 35 30 25 20 15 10
°C
Diagram: Bed & Bath wash cycle - Aqualtis
Ris.52°C
Ris.52°C
4' Mec.
4' Mec. 2"off -28" on 40 rpm
52°C
2"off -28" on 40 rpm
52°C
2"off -28" on 40 rpm
4' Mec.
2"off -28" on 40 rpm
Risc.57°C
Scarica
Mecc.12' 2"off -28" on 40 rpm
57°C
Scarica
GB
Language English
46
Service Manual Aqualtis - 2005
Ris.37°C
a fermo stand 5'
Precarica - carico
precarica carica 4lt mov19 stand 1'
APPENDIX
Movimento
Fase
60 55 50 45 40 35 30 25 20 15 10
°C
37°C
Diagram: Wool wash cycle - Aqualtis
120" 90rpm
Mec.(5')
Scarica
GB
Edition 2005.07.06
Language English
47
GB
Indesit Company viale Aristide Merloni, 47 60044 Fabriano - Italy tel. +39 0732 66 11 - telex 560196 - fax +39 0732 66 2954 - www.indesitcompany.com
Service Manual Aqualtis - 2005
Edition 2005.07.06
Language English
