SPECIAL ROOFING AND WATERPROOFING MATERIALS

Transformintoyoaur mwaostrkerpiece!

Liquid and paste waterproofing materials and accessories

SPECIAL ROOFING AND WATERPROOFING MATERIALS

The huge range of Special Products is divided in: • Liquid and paste waterproofing materials and systems • Roof accessories and application tools • Breathable Layers and functional layers

Special Products and accessories for finishing and waterproofing

Primer coat for concrete surfaces. Waterproofing of basins, terraces, balconies, bathrooms, swimming pools, tanks (always under water). Waterproofing of foundations, retaining walls.

C

Waterproofing of roofs, terraces, old bituminous layers.

C

Protection of bituminous layers. Bonding of insulation panels. Sealing of joints and/or vertical connections for skylights, aerators, filling of cracks and in concrete. Roads’ maintenance, filling of small holes, renovation of small surfaces and patches; sealing of small road cracks even with traffic in progress. Water-based product for wooden structures, for concrete casting. Cold bonding of bitumen polymer membranes in horizontal layers. Fixing primer for the removal of asbestos-cement sheets. Protection of gutters, pipes, tanks, poles, transmission towers, structural elements, metal structures in general. Protective and fixing varnish for granules. Water-based product and/or anyway solvent free

Solvent-based product

C Product available in a selected range of colours

POLYFIBREX

MINERAL FIX

BETONSHIELD

BITUMINA

REMOVAL

PRONTO

POLYCOLL

DISARMANTE

POLYCEM

POLYFIX

POLYVER ALU

POLYVER S

POLYVER ACRIL

POLYSINT

POLYCOAT

ELASTOPAINT PLUS

IDROPLAST

ACRIPLAST

Fields of application

IDROPRIMER

POLYPRIMER

PRODUCT TABLE

POLYPRIMER HP 45 PRO

A big range of special products such as glues, sealants, liquid membranes, breathable systems and fixing systems permit the most effective use of Polyglass products. Polyglass technical assistance is always at your complete disposal to verify if the chosen solution is the right one.

POLYPRIMER

POLYPRIMER HP 45

IDROPRIMER

ACRIPLAST

IDROPLAST

POLYCEM

POLYPRIMER is a bituminous primer containing oxidized bitumen and a mix of technical quick drying solvents. It is a fixing primer which stops powder and fills porosity of concrete surfaces in order to make easier the application of torch on, self-adhesive and liquid bituminous membranes.

POLYPRIMER HP 45 is a bituminous primer containing oxidized bitumen and selected fast drying solvents. It is a fixing primer which stops powder and fills porosity of concrete surfaces in order to make easier the application of torch on, self-adhesive and liquid bituminous membranes.

IDROPRIMER is a bituminous water-based primer used as a fixing primer which stops powder and fills porosity of concrete surfaces in order to ease the application of torch on, self-adhesive and liquid bituminous membranes. IDROPRIMER is not flammable and it is not dangerous for the applicator. Avoid the application in cold or humid weather, or in case of imminent rain to ease the product drying.

ACRIPLAST is a liquid bituminous elastomeric solvent based membrane particularly r e commended for roof application, on concrete terraces and on metallic structures. ACRIPLAST is an alternative to the bitumen polymer membrane for those applications where traditional membranes cannot be applied.

IDROPLAST is a liquid bituminous elastomeric water-based membrane particularly recommended for roof applications, concrete terraces, old bituminous membranes and foundations. IDROPLAST is an alternative to the bitumen polymer membrane for those applications where traditional membranes cannot be applied.

Bituminous solventbased asphalt particularly recommended for bonding of the waterproofing membranes to vertical connections, to the exhaust outlets, skylights and aerators. POLYCEM is also used to seal cracking of various dimensions on concrete surfaces before the application of waterproofing membranes.

POLYCOAT

POLYSINT

POLYVER ACRIL

POLYVER S

ELASTOPAINT PLUS is a waterproofing bitumen water-based paste, containing polystyrene spheres and rubber granules. ELASTOPAINT PLUS is a system particularly recommended for waterproofing foundations, basements and waterproofing basins, tanks, and wells from the outside, to protect the concrete from aggressive water.

Bituminous water-based cold asphalt with synthetic resins and selected filler particularly recommended for waterproofing concrete structure foundations and protective walls against the soil. It is recommended to apply two coats of POLYCOAT; the second coat must be applied when the first is completely dry.

It is a liquid waterproo fing elastomeric protective water-based membrane particularly recommended for roof applications, concrete terraces, cement, wood and metallic surfaces. Polysint is also recommended for renovating and repairing bituminous membranes.

Protective water-based paint with elastomers and mineral pigments particularly recommended as a finishing layer and also as a protective paint for new and/or old bitumen polymer membranes.

Protective solventbased paint with elastomers and mineral pigments particularly recommended as finishing layer and also as a protective paint for new and/or old bitumen polymer membranes.

Liquid and paste waterproofing materials and systems

ELASTOPAINT PLUS

POLYVER ALU

POLYFIX

DISARMANTE

POLYCOLL

PRONTO

REMOVAL

Protective bituminous solvent-based paint containing aluminum pigments, particularly recommended as finishing layer and also as a protective reflective paint for new and/or old bitumen polymer membranes.

POLYFIX is a solventbased bituminous glue for cold bonding by means of spots or stripes of insulating panels on concrete, metal, wood and on polymer bitumen membranes. POLIFIX does not leak even exposed to high temperatures, it has an immediate and constant adhesion; it is easy to apply and no primer is required.

DISARMANTE is a form release agent for plywood, planed, rough and wood formwork. DISARMANTE reduces the formwork cleaning operations, it has a low cost application and it improves the surface finishing.

POLYCOLL is a solventbased bituminous glue for cold bonding of polymer bitumen membranes on horizontal surfaces (slope max 10%) apt to be glued both on old bituminous membranes and on the waterproofing of new concrete or wood surfaces replacing the traditional bonding flame.

PRONTO is a cold bituminous conglomerate made of a mix of bitumen, emulsifiers and selected inert for small road reparations and maintenance where a quick repair service and a practical use is necessary. For a better result it is recommended to sprinkle a layer of concrete in summer and thin sand in winter.

Solvent free fixing primer based on acrylic resins suitable for asbestos treatment to avoid the environmental contamination by asbestos fibres during the removal/treatment of asbestos cement roofing sheets and/or the application of Polymant insulation.

BETONSHIELD

MINERAL FIX

POLYFIBREX

BITUMINA is a protective quick drying solvent based bituminous varnish. It is water repellent and it has excellent characteristics of resistance to chemical agents. It is recommended for protection of gutters, pipes, pylons, carpentry elements and metallic structures in general. It protects from dampness and from chemical agents underground tanks, drain pipes and sewers.

Concrete-based bicomponent mortar ideal for waterproofing and protection of concrete structures. It is apt for waterproofing of concrete surfaces such as balconies, bathrooms and swimming pools.

Mineral fix is a milky white water-based fixing varnish that once dry become transparent. MINERAL FIX is particularly suitable for protecting and fixing slate chippings on polymer bitumen membranes and on bituminous tiles.

POLYFIBREX is a solvent-based fibre-reinforced elastoplastic coating, resistant to ponding water, used for waterproofing and for UV protection of concrete surfaces and surfaces consisting of old polymer bitumen membranes.

Liquid and paste waterproofing materials and systems

BITUMINA

POLYOXID POLYOXID is an organic compound made of a mix of hydrocarbons, of black colour, coming from the processing of crude oil. POLYOXID has binding, adhesive and waterproofing properties. It presents itself solid at room temperature but softens by heating.

POLYVEL, POLYDREN and poliestere 60 POLYVEL is a glass fiber net used as a separation layer and reinforcement for liquid waterproofing systems. POLYDREN is a TNT polyester felt recommended for drainage systems for roof gardens and as separation layers. POLIESTERE 60 is a white nonwoven fabric with a mass of 60 g/m2 that is usually used as reinforcement for liquid membranes waterproofing.

POLYCART C

POLYVENT

POLYCART C is a bituminous felt paper made of felt paper filled with bitumen till saturation. Its application comes through hot coating of our Polyoxid for multilayer waterproofing or dry for sliding layers.

POLYVENT is a membrane made of a modified bitumen compound with polypropylene and of a fabric of reinforced drilled glass fiber.

POLYFOND KIT GLASSFIBER NET POLYFOND KIT DRAIN POLYFOND KIT is a protective system consisting of high density extruded polyethylene (HDPE). It is particularly recommended for the protection of foundations’ waterproofing. In POLYFOND KIT DRAIN the polypropylene white geotextile guarantees an excellent drainage capacity for roof gardens.

Glass fiber net applied as a reinforcement between the coats gives to the system an apt resistance to movements of the various layers due to the temperature range and to the shrinkage, avoiding possible cracks.

www.polyglass.com

POLYTEGOLA

POLYWOOD ECOVAP

SILVERTEK 15

POLYDECK

PVC dilatation waterstop with excellent features of water resistance and mechanical dilatation, recommended for joints.

P O LY T E G O L A i s a Canadian-Style bituminous shingle which meets the European Norm EN 544. It is made of a fiberglass structure soaked in oxidized bitumen and covered with coloured mineral granules on the upper face. POLYTEGOLA is available in two shapes: rectangular with three elements and beavertail with five elements.

POLYWOOD and ECOVAP are bituminous protective screens recommended for undertile layers and for wood ventilated roofs. They consist of a TNT polyester reinforcement saturated in modified bitumen with TNT polypropylene finishing on the surface.

SILVERTEK 15 is a breathable synthetic protection obtained by the combination of three polypropylene layers. It is a breathable layer between the insulation and the ventilation chamber. It is an insulation protection from infiltrations due to condensation and it is breathable to permit the passage of water vapour but not of water.

POLYDECK is a bituminous protective screen recommended for under tile layer and for wood ventilated roofs. It consists of a TNT polyester reinforcement saturated in modified bitumen with talc finishing on the surface.

Sd = 50

Sd = 0,02

Sd = 100

WATER FLAT PVC dilatation waterstop particularly apt to guarantee perfect continuity of concrete casting and at the same time it ensures a perfect water impermeability.

Roof accessories and application tools

WATER BULB

OUTLET SUPER

POLYETHYLENE VENTS

CORNER OUTLET

PROPANE GAS TORCH

LEAF GUARD

GRANULES

IGOM. CE. outlet with 250 mm height and available in 60, 80, 100, 125, 140 mm diameter.

Vapour outlet. It can be simple type with 7,5 cm of diameter and 27 cm height or double draft.

Plastic Outlet. The model at 90° has a section of 10 x 10 cm and a length of 50 cm. The product with round/ square fitting has a diameter of 8 or 10 cm.

Hot air torch working with propane gas specific for the application of bituminous membranes. It guarantees excellent performances thanks to the strong flame power.

Universal polyethylene model for outlets available in diameters from 7,5 to 12,5 cm.

Granules available in the following colours: natural grey, green, red, brown and white. Other colours could be supplied on demand.

www.polyglass.com

PROPAN GAS TORCH

HOT AIR LEISTER

Plastic anchors with expansion plugs.

Torch which develops hot air working with propane gas, specific where the use of free flame is limited.

Hot air efficient tool to weld without difficulty thanks to its limited weight and to the small handle diameter.

LEISTER NOZZLE

SILICON ROLLER

Nozzle with wide Silicon pressure opening plug-in roller of 40 mm with applied (40 and 60 ball-bearings. mm diameter).

PRESSING ROLLER Available in small or big models.

www.polyglass.com

Breathable Layers and functional layers

ANCHORS

relational - 08/11 - 3000

SPECIAL ROOFING AND WATERPROOFING MATERIALS

POLYGLASS SPA

Sede Registered Legale -Office Viale -Jenner, Viale Jenner, 4 - 20159 4 - 20159 MILANO MILANO - Sede -Amministrativa Head Office - Via - Via dell’Artigianato, dell’Artigianato, 3434 - 31047 - 31047 Ponte Ponte di di Piave Piave (TV) (TV) - Italy - Italy Tel. +39 04227547 - Fax +39 0422854118 - www.polyglass.com - [email protected]