TECHNICAL DATA SHEET CAT 6 S/FTP Stranded LSOH PATCHCORD
code version date page
NN01297 2.2 2010-03-03 1/5
Application: · High Density Switch & Hub · Working area cord and telecommunications equipment cord in Local Area Networking environments · Support current and future Category 6 applications, such as: 1000Base-T (Gigabit Ethernet), 100 Base-T, 10 Base-T, FDDI, ATM General standards: · ISO/IEC 11801 2nd edition, 2002 · EN 50173-1, 2002 · ANSI/TIA/EIA 568-B.2-1, 2001 · IEC 60603-7-1, 2009 · FCC 47, Part 68, Subpart F · IEC 603-7, 1990 (for plug) Construction
Figure 1 Belden CAT 6 modular cord assembly
1. Patch cord structure (In figure 1) Cable Jacket: Plug Housing: Contact Blade: Shield: Assembly: Boot:
LSOH (Low Smoke Zero Halogen) Polycarbonate (PC), UL 94V-2 rated Phosphor bronze plated with 1.27um gold over 2.54um nickel undercoat Copper (0.25mm) plated with 0.67um Nickel 568B on both sides PVC (Drawing referred to PX103800-811)
ã Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner
code version date page
TECHNICAL DATA SHEET CAT 6 S/FTP Stranded LSOH PATCHCORD
NN01297 2.2 2010-03-03 2/5
2. Patch cable structure (Shown in Figure 2)
1 2 3 4 5 Figure 2 CAT 6 Stranded S/FTP patch cable
1) Conductor
Material Diameter
Stranded bare copper ETP 7x0.16 (AWG 26)
2) Insulation
Material Nominal diameter over insulation
Foam Polyethylene 1.03 mm
3) Cable core
Pair Pair shielding
Number of pairs Colour code pair 1 Colour code pair 2 Colour code pair 3 Colour code pair 4
2 twisted insulated conductors Laminated aluminium-polyester Aluminium facing outside 4, all twisted together White / Blue White / Orange White / Green White / Brown
4) Braid shielding
Material Coverage
Tinned copper (16/5/0.10mm) ≥ 55%
5) Jacket
Material LSOH Diameter 6.2± 0.2 mm Color Refer to PS-08008 Standard text: BELDEN (15759) STRANDED SHIELDED S/FTP CAT 6 LSOH MODULAR CORD 4PR/26 AWG ã Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner
TECHNICAL DATA SHEET CAT 6 S/FTP Stranded LSOH PATCHCORD
code version date page
NN01297 2.2 2010-03-03 3/5
Technical information 1. Electrical characteristics The patch cords are tested on the coils for NEXT and return loss. (>180mm diameter) The equipment is: Fluke DTX1800 (Fluke Networks part number DTX-1800) Firmware revision 2.22 and up with Patch cords test head adapter (Fluke Networks part number DTX-PCU6S) And the test setup is shown in Figure 3. Patch cords under test (coiled in 180mm diameter)
Fluke DTX Main
Fluke DTX remote
Figure 3. NEXT & Return loss Test setup for the patch cords
NEXT requirement: Return loss requirement: Current Rating: Insulation Resistance: Contact Resistance: Dielectric Strength: Voltage:
1dB margin compared to TIA/EIA-568-B.2 Limit 1dB margin compared to TIA/EIA-568-B.2 Limit 1.5 A 500 MΩ min. 20 mΩ max. 1000 VAC (rms) 72 VDC max.
(See Annex 1) (See Annex 1)
ã Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner
TECHNICAL DATA SHEET CAT 6 S/FTP Stranded LSOH PATCHCORD
2.
code version date page
NN01297 2.2 2010-03-03 4/5
Mechanical characteristics
Insertion Life: Temperature rating installation: Temperature rating operation and storage:
750 mating cycles 0/50℃ -20/60℃
Part number structure The physical and electrical characteristics of the Belden CAT 6 shielded modular cords are defined regarding color and length: Part Number:
NN01297.AACLL
AA
=
Color (refer to PS-08008, the color specifications) 01=Brown, 02=Red, 03=Orange, 04=Yellow, 05=Green, 06=Blue, 07=Purple, 08=Grey, 09=White, 10=Black
C
=
Coil in Bag
LL
=
Cord Length in meter D5 = 0.5 m, 1= 1 m, 2= 2 m, 3= 3 m, 5= 5 m, 10= 10 m, 15= 15 m
Packaging Each patch cord is packed in a plastic bag with identification label. Each carton to be filled in line with the defined packaging quantity for the different lengths.
Length in Metres 0.5 1 2 3 5 10 15
Quantity per carton 200 150 100 70 50 25 20
Change history: · · · ·
2009-12-16: First issue of this specification. Version 1 2010-01-21: Second issue with the following changes Version 2 § 7 Color codes changed in the part number structure to match Belden Richmond code § Cable specifications corrected to reflect approved product. 2010-02-26: Third issue with the following changes Version 2.1 § All 10 Color codes changed in the part number structure to match Belden Richmond code 2010-03-03: Fourth issue with the following changes Version 2.2 § Standard Text updated with Vendor code. ã Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner
TECHNICAL DATA SHEET CAT 6 S/FTP Stranded LSOH PATCHCORD
§
code version date page
NN01297 2.2 2010-03-03 5/5
Annex 1 Required Electrical performance for the CAT 6 S/FTP stranded patch cord
Belden declares this product to be in compliance with the environmental regulations EU RoHS (Directive 2002/95/EC, 27 January 2003); this is valid for all material produced after the RoHS compliant date for this product.
ã Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner
