MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038389X
1/7
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 244 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM
TENSILE TEST / ENSAYO DE TENSIÓN Specimen condition
Specimen dimensions
Test
Y.S.
U.T.S.
Sample N° Zone
Pipe N°
Condición de la probeta
Dimensiones de la probeta
temp
Eul 0.5%
Req.
Colada N° Muestra N° Zona
Tubo N°
Ls
Heat N°
Sc
Type
Ori
Tipo 40372 40372
92580 92581
E1 E2
10005 10006
B B
AM AM
Ss Ss
L L
Size
Area
Temp. Min: 80 000
Min: 95 000
Tamaño
Sección
ensayo Max: 95 000
Max: --
mm
mm2
°C
psi
psi
37.96 x 21.00 37.87 x 19.65
797,16 744,15
RT RT
85 295 82 636
104 852 102 975
Y.S./U.T.S Req. Max.
Elongation / Alargamiento Lo
Min.
Obt.
-0.81 0.80
inch
%
%
2 2
21.6 21.3
44.0 46.0
AM: As manufactured / Según proceso de fabricación
Ls: Location of sample / Ubicación de la muestra
Req. Max: Required maximum / Máximo requerido
U.T.S: Ultimate tensile strength / Resistencia
B: Body / Cuerpo
Max: Maximum / Máximo
Req: Required / Requerido
Y.S: Yield strength / Fluencia
E1 / E2: Ends of Sampling / Extremos de Muestra
Min: Minimum / Mínimo
RT: Room temperature / Temperatura ambiente
L: Longitudinal / Longitudinal
Obt: Obtained / Obtenido
Sc: Specimen condition / Condición de la probeta
Lo: Initial length / Longitud inicial
Ori: Orientation / Orientación
Ss: Strip specimen / Muestra rectangular
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038389X
2/7
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 244 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM
CHEMICAL COMPOSITION / COMPOSICIÓN QUÍMICA Composition % / Composición % X 100
H
Heat N°
Sample N° P
Colada N° Muestra N° 40372 40372 40372
00001 92580 92581
X 1000
C
Mn
Si
Cr
Mo
S
P
Ni
Max
43
190
45
Min
--
--
--
--
--
30
30
--
--
--
--
Max
43
190
45
Min
--
--
--
--
--
30
30
--
--
--
--
H P P
23 22 22
121 122 122
30 31 31
50 51 51
8.1 8 8
1.7 0.8 0.7
12 13 13
H: Heat / Colada
X 10000
V
Cu
Al
Sn
As
Nb
250
--
350
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
250
--
350
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
60 60 60
0 0 0
134 140 140
20 19 20
8 8 8
5 5 5
0 0 0
27 27 28
16 17 15
18 18 19
74 74 74
Max: Maximum / Máximo
Ti
Ca
B
N
Min: Minimum / Mínimo
P: Product / Producto
THROUGH WALL HARDNESS / DUREZA EN EL ESPESOR Required values Valores requeridos Heat N°
Individuals / Individuales Min: --
Max: 22.0
Sample N° Zone
Pipe N°
Colada N° Muestra N° Zona
Tubo N°
Ls
Sc
10005 10006
B B
AM AM
40372 40372
92580 92581
E1 E2
Average / Promedio
Var: --
Specimen condition
Min: --
Quad. 1 1
Max: --
Hardness type HRC Var: --
Scale
Dureza tipo
OD
MW
ID
Var.
Escala
1
2
3
Avg.
1
2
3
Avg.
1
2
3
Avg.
HRC HRC
15.4 17.5
16.9 17.3
17.9 17.3
16.7 17.4
16.8 17.2
18.9 16.9
17.9 17.2
17.9 17.1
16.0 15.9
17.8 16.3
17.9 17.8
17.2 16.7
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
1.1 0.7
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038389X
3/7
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 244 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM
THROUGH WALL HARDNESS / DUREZA EN EL ESPESOR AM: As manufactured / Según proceso de fabricación
ID: Internal diameter / Diámetro interno
MW: Middle wall / Centro
Avg: Average / Promedio
Ls: Location of sample / Ubicación de la muestra
OD: Outside diameter / Diámetro externo
Var: Variation / Variación
B: Body / Cuerpo
Max: Maximum / Máximo
Quad: Quadrant / Cuadrante
E1 / E2: Ends of Sampling / Extremos de Muestra
Min: Minimum / Mínimo
Sc: Specimen condition / Condición de la probeta
IMPACT TEST / ENSAYO DE IMPACTO Type/Tipo: CHARPY V Position/Posición: N/A
Orientation/Orientación: L Temp: -46 Unit/Unidad: °C
Unit / Unidad: ft.lb Ind.Min.Req: 10 Req.Min.Avg: 15
Shear area / Área frágil % Ind.Min.Req: -Req.Min.Avg: --
Heat N° Sample N° Zone
Pipe N°
T.T
Size / Tamaño
Colada N° Muestra N° Zona
Tubo N°
Ls
Sc
°C
mm
1
2
3
Avg.
1
2
3
Avg.
10005 10006
B B
AM AM
-46 -46
10 x 10 10 x 10
77.0 85.0
75.0 93.0
91.0 85.0
81.0 88.0
60 60
60 60
60 60
60.0 60.0
40372 40372
92580 92581
E1 E2
Results / Resultados
Results / Resultados
AM: As manufactured / Según proceso de fabricación
Ind. Min. Req: Invidual Minimum Required / Requeri
Req. Min. Avg: Required minimum average / Promedio
Avg: Average / Promedio
do Mínimimo Individual
mínimo requerido
B: Body / Cuerpo
L: Longitudinal / Longitudinal
Sc: Specimen condition / Condición de la probeta
E1 / E2: Ends of Sampling / Extremos de Muestra
Ls: Location of sample / Ubicación de la muestra
T.T: Test temperature / Temperatura de ensayo
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Temp: Temperature / Temperatura
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038389X
4/7
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 244 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM
IMPACT TEST / ENSAYO DE IMPACTO Type/Tipo: CHARPY V Position/Posición: N/A
Temp: 0
Orientation/Orientación: T Unit/Unidad: °C
Unit / Unidad: ft.lb Ind.Min.Req: 12 Req.Min.Avg: 18
Shear area / Área frágil % Ind.Min.Req: 0 Req.Min.Avg: --
Heat N° Sample N° Zone
Pipe N°
T.T
Size / Tamaño
Colada N° Muestra N° Zona
Tubo N°
Ls
Sc
°C
mm
1
2
3
Avg.
1
2
3
Avg.
10005 10006
B B
AM AM
0 0
10 x 10 10 x 10
132.0 137.0
137.0 133.0
138.0 132.0
136.0 134.0
100 100
100 100
100 100
100.0 100.0
40372 40372
92580 92581
E1 E2
Results / Resultados
Results / Resultados
AM: As manufactured / Según proceso de fabricación
Ind. Min. Req: Invidual Minimum Required / Requeri
mínimo requerido
Avg: Average / Promedio
do Mínimimo Individual
Sc: Specimen condition / Condición de la probeta
B: Body / Cuerpo
Ls: Location of sample / Ubicación de la muestra
T.T: Test temperature / Temperatura de ensayo
E1 / E2: Ends of Sampling / Extremos de Muestra
Req. Min. Avg: Required minimum average / Promedio
T: Transversal / Transversal
Temp: Temperature / Temperatura
HEAT TREATMENT / TRATAMIENTO TÉRMICO Heat treatment / Tratamiento térmico: Pipe / Tubo Quench media of heat treatment process / Medio de enfriamento del tratamiento térmico: Water / Agua Temperature Scale / Escala de Temperatura: °C Type Tipo Quenched Tempered This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038389X
5/7
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 244 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM
THREADING / ROSCADO Threading Roscado THE PRODUCT HAS BEEN THREADED ACCORDING TO LICENSEE AND TENARISTAMSA INTERNAL P ROCEDURES
EL PRODUCTO HA SIDO ROSCADO DE ACUERDO A LICENCIA Y LOS PROCEDIMIENTOS INTERNOS DE TENARISTAMSA
SUPPLEMENTARY INFORMATION / INFORMACIÓN SUPLEMENTARIA Supplementary Information Información Suplementaria Manufactured by TenarisTamsa Steel making process: Electric Arc Furnace-Ladle Furnace-Continuous Casting Machine. Fully Killed Steel Material free from Mercury contamination Not repaired by welding Non destructive test. Satisfactory Inspection method WMPI COUPLING, O.D. & I.D., LONG. CERTIFICATE ACCORDING TO ISO11960/API5CT SR15
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Fabricado por TenarisTamsa Fabricación del acero: Horno de Arco Eléctrico-Horno de Afinación-Máquina de Colada Continua. Acero calmado con aluminio Material libre de contaminación de Mercurio No reparado por soldadura Control no destructivo. Satisfactorio Método de inspección WMPI COUPLING, O.D. & I.D., LONG. CERTIFICATE ACCORDING TO ISO11960/API5CT SR15
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038389X
6/7
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 244 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM
MARKING / MARCACIÓN Marking Marcación COUPLING STENCIL: TENARIS TM ISO 11960 / 5CT-0124 ? #FE2 L S13 O.P 137758 / #C***** T-XX WHERE : Coupling stock number T-XX: Heat number #C*****: Manufacturing Date #FE2: API; Monogram ?:
COPLE ESTARCIDO: TENARIS TM ISO 11960 / 5CT-0124 ? #FE2 L S13 O.P 137758 / #C***** T-XX DONDE : Numero de tubo para cople T-XX: Numero de colada #C*****: Fecha de Fabricación #FE2: Monograma; API ?:
TRACKING / RASTREABILIDAD Type / Tipo: SR 15.2 Heat N° Colada N° 40372 40372
Pipe N° Tubo N° 10005 10006
Sample N° Muestra N° 92580 92581
Tracking Pipe Number Número de Rastreabilidad de Tubo FROM 10001 TO 10009 FROM 10001 TO 10009
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038389X
7/7
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 244 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM This is to certify that the product described here has been manufactured, sampled, tested, and inspected in accordance with purchaser order requirements. This certificate is not a declaration of origin nor may it be used as a declaration of origin.
CUSTOMER . THIRD PARTY
Por el presente certificamos que el material aquí descrito ha sido fabricado, muestreado, ensayado e inspeccionado de acuerdo a los requisitos de su orden de compra. Este certificado no es, ni puede ser usado, como una declaración de origen.
TENARIS QUALITY DEPARTMENT SIGNATURE
INSPECTION COMPANY COMPAÑÍA DE INSPECCIÓN
NO APLICA Employee Name: N/A
QUALITY CERTIFICATION DEPT.
CHIEF OF QUALITY CERTIFICATION DEPT.
Quality System Certified
DEPTO. DE CERTIFICACIÓN DE CALIDAD
RESPONSABLE DEL DEPTO. DE CERTIFICACIÓN DE CALIDAD
N° 110950
Alejandro Molina Iglesias
Juan Fco. Renato Avila Aldapa
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038388
1/9
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
CASING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
REVESTIMIENTO
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
Quantity / Cantidad: 244 Pcs/Pz
7-5/8 X 0.375 INCH
N/A
37.99 / 42.49 FT
10281.102 FT
304991.286 LB
29.70 LB/FT
11.58 / 12.95 MTS
3133.680 MTS
138341.000 KG
44.20 KG/M
193.68 X 9.52 MM
TENSILE TEST / ENSAYO DE TENSIÓN Specimen condition
Specimen dimensions
Test
Y.S.
U.T.S.
Sample N° Zone
Pipe N°
Condición de la probeta
Dimensiones de la probeta
temp
Eul 0.5%
Req.
Colada N° Muestra N° Zona
Tubo N°
Ls
Heat N°
Sc
Type
Ori
Tipo 40581 40581 40591 40591 40591 40591 40591 40591
81843 81844 81837 81838 81839 81840 81841 81842
E1 E2 E1 E2 E1 E2 E1 E2
00304 00312 00020 00095 00105 00195 00205 00229
B B B B B B B B
AM AM AM AM AM AM AM AM
Ss Ss Ss Ss Ss Ss Ss Ss
L L L L L L L L
Size
Area
Temp. Min: 80 000
Min: 95 000
Tamaño
Sección
ensayo Max: 95 000
Max: --
mm
mm2
°C
psi
psi
25.43 x 9.33 25.36 x 9.66 25.28 x 9.32 25.45 x 9.46 24.41 x 9.38 25.29 x 9.84 25.26 x 9.90 25.39 x 9.45
237,26 244,98 235,61 240,76 228,97 248,85 250,07 239,94
RT RT RT RT RT RT RT RT
84 869 88 510 82 792 88 638 89 875 92 094 89 648 90 657
99 134 101 424 99 860 101 652 104 781 104 724 102 719 103 444
Y.S./U.T.S Req. Max.
Elongation / Alargamiento Lo
Min.
Obt.
-0.86 0.87 0.83 0.87 0.86 0.88 0.87 0.88
inch
%
%
2 2 2 2 2 2 2 2
16.9 17.1 16.9 17.0 16.8 17.1 17.1 17.0
34.0 31.0 35.0 33.0 32.0 31.0 30.0 30.0
AM: As manufactured / Según proceso de fabricación
Ls: Location of sample / Ubicación de la muestra
Req. Max: Required maximum / Máximo requerido
U.T.S: Ultimate tensile strength / Resistencia
B: Body / Cuerpo
Max: Maximum / Máximo
Req: Required / Requerido
Y.S: Yield strength / Fluencia
E1 / E2: Ends of Sampling / Extremos de Muestra
Min: Minimum / Mínimo
RT: Room temperature / Temperatura ambiente
L: Longitudinal / Longitudinal
Obt: Obtained / Obtenido
Sc: Specimen condition / Condición de la probeta
Lo: Initial length / Longitud inicial
Ori: Orientation / Orientación
Ss: Strip specimen / Muestra rectangular
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038388
2/9
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
CASING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
REVESTIMIENTO
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
Quantity / Cantidad: 244 Pcs/Pz
7-5/8 X 0.375 INCH
N/A
37.99 / 42.49 FT
10281.102 FT
304991.286 LB
29.70 LB/FT
11.58 / 12.95 MTS
3133.680 MTS
138341.000 KG
44.20 KG/M
193.68 X 9.52 MM
CHEMICAL COMPOSITION / COMPOSICIÓN QUÍMICA Composition % / Composición % X 100
H
Heat N°
Sample N° P
Colada N° Muestra N° 40581 40581 40581 40591 40591 40591 40591 40591 40591 40591
00001 81843 81844 00001 81837 81838 81839 81840 81841 81842
H: Heat / Colada
X 1000
C
Mn
Si
Cr
Mo
S
P
Ni
Max
43
190
45
Min
--
--
--
--
--
30
30
--
--
--
--
Max
43
190
45
Min
--
--
--
--
--
30
30
--
--
--
--
H P P H P P P P P P
24 24 24 24 24 25 25 25 25 25
132 132 134 133 131 132 134 135 133 134
26 26 26 31 29 29 29 29 29 29
8 8 8 6 6 6 6 6 6 6
2.2 2.5 2.3 1.3 1.5 1.6 1.3 1.4 1.4 1.4
2 2.7 2.4 3 3.3 3.3 3.9 3.9 3.8 4.2
12 11 11 13 12 12 12 13 12 12
X 10000
V
Cu
Al
Sn
As
250
--
350
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
250
--
350
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
60 60 60 60 60 60 60 60 60 60
0 0 0 0 0 0 0 0 0 0
143 137 140 160 157 157 159 162 159 159
25 25 24 21 22 22 21 21 22 21
10 9 9 12 11 11 11 11 11 11
5 5 4 6 5 5 5 5 5 5
0 0 0 0 0 0 0 0 0 0
32 32 30 32 31 32 31 32 31 32
17 10 8 17 16 15 13 13 15 15
22 20 19 23 20 20 21 22 21 21
78 78 78 65 65 65 65 65 65 65
Max: Maximum / Máximo
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Nb
Ti
Ca
B
N
Min: Minimum / Mínimo
P: Product / Producto
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038388
3/9
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
CASING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
REVESTIMIENTO
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
Quantity / Cantidad: 244 Pcs/Pz
7-5/8 X 0.375 INCH
N/A
37.99 / 42.49 FT
10281.102 FT
304991.286 LB
29.70 LB/FT
11.58 / 12.95 MTS
3133.680 MTS
138341.000 KG
44.20 KG/M
193.68 X 9.52 MM
THROUGH WALL HARDNESS / DUREZA EN EL ESPESOR Required values Valores requeridos Heat N°
Individuals / Individuales Min: --
Max: 22.0
Sample N° Zone
Pipe N°
Colada N° Muestra N° Zona
Tubo N°
Ls
Sc
00304 00312 00020 00095 00105 00195 00205 00229
B B B B B B B B
AM AM AM AM AM AM AM AM
40581 40581 40591 40591 40591 40591 40591 40591
81843 81844 81837 81838 81839 81840 81841 81842
E1 E2 E1 E2 E1 E2 E1 E2
Average / Promedio
Var: --
Specimen condition
Min: --
Quad. 1 1 1 1 1 1 1 1
Max: --
Hardness type HRC Var: --
Scale
Dureza tipo
OD
MW
ID
Var.
Escala
1
2
3
Avg.
1
2
3
Avg.
1
2
3
Avg.
HRC HRC HRC HRC HRC HRC HRC HRC
14.4 16.8 15.5 15.6 14.7 17.4 14.8 16.7
16.1 17.0 16.4 15.2 16.4 17.3 17.1 16.0
15.5 17.5 16.3 16.8 16.0 17.1 16.6 15.9
15.3 17.1 16.1 15.9 15.7 17.3 16.2 16.2
15.9 17.3 16.6 16.6 15.0 17.8 16.8 17.3
16.3 17.6 16.0 16.8 16.5 17.6 19.2 18.4
16.5 17.5 16.7 16.8 16.3 16.6 17.3 18.0
16.2 17.5 16.4 16.7 15.9 17.3 17.8 17.9
16.4 16.9 15.6 15.0 16.0 17.4 16.1 17.5
16.0 16.6 16.4 16.3 16.3 17.1 16.5 17.6
16.0 17.7 16.9 16.9 16.5 17.1 16.9 17.1
16.1 17.1 16.3 16.1 16.3 17.2 16.5 17.4
AM: As manufactured / Según proceso de fabricación
ID: Internal diameter / Diámetro interno
MW: Middle wall / Centro
Avg: Average / Promedio
Ls: Location of sample / Ubicación de la muestra
OD: Outside diameter / Diámetro externo
B: Body / Cuerpo
Max: Maximum / Máximo
Quad: Quadrant / Cuadrante
E1 / E2: Ends of Sampling / Extremos de Muestra
Min: Minimum / Mínimo
Sc: Specimen condition / Condición de la probeta
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
0.9 0.4 0.4 0.9 0.6 0.1 1.6 1.7 Var: Variation / Variación
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038388
4/9
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
CASING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
REVESTIMIENTO
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
Quantity / Cantidad: 244 Pcs/Pz
7-5/8 X 0.375 INCH
N/A
37.99 / 42.49 FT
10281.102 FT
304991.286 LB
29.70 LB/FT
11.58 / 12.95 MTS
3133.680 MTS
138341.000 KG
44.20 KG/M
193.68 X 9.52 MM
IMPACT TEST / ENSAYO DE IMPACTO Type/Tipo: CHARPY V Position/Posición: N/A
Orientation/Orientación: L Temp: -46 Unit/Unidad: °C
Unit / Unidad: ft.lb Ind.Min.Req: 8 Req.Min.Avg: 12
Shear area / Área frágil % Ind.Min.Req: -Req.Min.Avg: --
Heat N° Sample N° Zone
Pipe N°
T.T
Size / Tamaño
Colada N° Muestra N° Zona
Tubo N°
Ls
Sc
°C
mm
1
2
3
Avg.
1
2
3
Avg.
00304 00312 00020 00095 00105 00195 00205 00229
B B B B B B B B
AM AM AM AM AM AM AM AM
-46 -46 -46 -46 -46 -46 -46 -46
10 x 7.5 10 x 7.5 10 x 7.5 10 x 7.5 10 x 7.5 10 x 7.5 10 x 7.5 10 x 7.5
106.0 108.0 104.0 97.0 108.0 98.0 107.0 106.0
116.0 113.0 95.0 88.0 100.0 95.0 91.0 95.0
114.0 116.0 101.0 103.0 110.0 96.0 98.0 96.0
112.0 112.0 100.0 96.0 106.0 96.0 99.0 99.0
100 100 85 100 100 100 100 100
100 100 85 100 100 100 100 100
100 100 85 100 100 100 100 100
100.0 100.0 85.0 100.0 100.0 100.0 100.0 100.0
40581 40581 40591 40591 40591 40591 40591 40591
81843 81844 81837 81838 81839 81840 81841 81842
E1 E2 E1 E2 E1 E2 E1 E2
Results / Resultados
Results / Resultados
AM: As manufactured / Según proceso de fabricación
Ind. Min. Req: Invidual Minimum Required / Requeri
Req. Min. Avg: Required minimum average / Promedio
Avg: Average / Promedio
do Mínimimo Individual
mínimo requerido
B: Body / Cuerpo
L: Longitudinal / Longitudinal
Sc: Specimen condition / Condición de la probeta
E1 / E2: Ends of Sampling / Extremos de Muestra
Ls: Location of sample / Ubicación de la muestra
T.T: Test temperature / Temperatura de ensayo
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Temp: Temperature / Temperatura
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038388
5/9
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
CASING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
REVESTIMIENTO
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 244 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
7-5/8 X 0.375 INCH
N/A
193.68 X 9.52 MM
Length / Longitud:
37.99 / 42.49 FT
10281.102 FT
304991.286 LB
29.70 LB/FT
11.58 / 12.95 MTS
3133.680 MTS
138341.000 KG
44.20 KG/M
HYDROSTATIC TEST / PRUEBA HIDRÁULICA Pressure / Presión
Time / Tiempo
Unit / Unidad.
Value / Valor
Seconds / Segundos
PSI
6,300
5
Results / Resultado
Satisfactory / Satisfactorio
HEAT TREATMENT / TRATAMIENTO TÉRMICO Heat treatment / Tratamiento térmico: Pipe / Tubo Quench media of heat treatment process / Medio de enfriamento del tratamiento térmico: Water / Agua Temperature Scale / Escala de Temperatura: °C Type Tipo Quenched Tempered
THREADING / ROSCADO THE PRODUCT HAS BEEN THREADED ACCORDING TO LICENSEE AND TENARISTAMSA INTERNAL P ROCEDURES
Threading Roscado EL PRODUCTO HA SIDO ROSCADO DE ACUERDO A LICENCIA Y LOS PROCEDIMIENTOS INTERNOS DE TENARISTAMSA
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038388
6/9
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
CASING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
REVESTIMIENTO
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
Quantity / Cantidad: 244 Pcs/Pz
7-5/8 X 0.375 INCH
N/A
37.99 / 42.49 FT
10281.102 FT
304991.286 LB
29.70 LB/FT
11.58 / 12.95 MTS
3133.680 MTS
138341.000 KG
44.20 KG/M
193.68 X 9.52 MM
SUPPLEMENTARY INFORMATION / INFORMACIÓN SUPLEMENTARIA Manufactured by TenarisTamsa Steel making process: Electric Arc Furnace-Ladle Furnace-Continuous Casting Machine. Fully Killed Steel Material free from Mercury contamination Not repaired by welding Non destructive test. Satisfactory Inspection method SR-1 - EMI - FLVI - SEA Drift. Diameter. 171.46 MM / 6.750 INCH Length 152.4 MM / 6.000 INCH CERTIFICATE ACCORDING TO ISO11960/API5CT SR15 STANDARD(EMI): NOTCH 10% O.D. & I.D. LONG. & TRANSV.
Supplementary Information Información Suplementaria Fabricado por TenarisTamsa Fabricación del acero: Horno de Arco Eléctrico-Horno de Afinación-Máquina de Colada Continua. Acero calmado con aluminio Material libre de contaminación de Mercurio No reparado por soldadura Control no destructivo. Satisfactorio Método de inspección SR-1 - EMI - FLVI - SEA Drift. Diameter. 171.46 MM / 6.750 INCH Length 152.4 MM / 6.000 INCH CERTIFICATE ACCORDING TO ISO11960/API5CT SR15 STANDARD(EMI): NOTCH 10% O.D. & I.D. LONG. & TRANSV.
MARKING / MARCACIÓN PIPE STENCIL: #T***** = TENARIS TM ISO 11960 / 5CT-0124 ? #FE2 7-5/8 29.70L S S1 P 6300 PSI BC D #T***** HEAT #C**** O.P 137758 / #P*** FT MADE IN MEXICO WHERE :
Marking Marcación MASCARILLA DE TUBO ESTARCIDO: #T***** = TENARIS TM ISO 11960 / 5CT-0124 ? #FE2 7-5/8 29.70L S S1 P 6300 PSI BC D #T***** HEAT #C**** O.P 137758 / #P*** FT MADE IN MEXICO DONDE :
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038388
7/9
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
CASING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
REVESTIMIENTO
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 244 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
7-5/8 X 0.375 INCH
N/A
193.68 X 9.52 MM
Length / Longitud:
37.99 / 42.49 FT
10281.102 FT
304991.286 LB
29.70 LB/FT
11.58 / 12.95 MTS
3133.680 MTS
138341.000 KG
44.20 KG/M
MARKING / MARCACIÓN Marking Marcación Numero de colada #C****: Fecha de Fabricación #FE2: Longitud de tubo en Fts #P***: Num. de Rastreab. Total #T*****: Numero de cuadrilla =: Monograma; API ?:
Heat number #C****: Manufacturing Date #FE2: Pipe length in Fts #P***: Total Traceability Number #T*****: Shift number =: API; Monogram ?:
SUMMARY REPORT / REPORTE RESUMEN Heat N° Colada N°
Quantity Cantidad (Pieces)
(Ft.)
(Mts.)
Weight Peso (Tons)
40581 40591
16 228
672.41 9,608.69
204.95 2,928.73
9.041 129.3
Average length per pipe Longitud promedio por tubo (Ft.) (Mts.) 42.136
12.843
Length Longitud
Nominal weight per pipe Peso nominal por tubo (Lb/Ft) (Kg/Mts) 29.665
44.146
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038388
8/9
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
CASING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
REVESTIMIENTO
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
Quantity / Cantidad: 244 Pcs/Pz
7-5/8 X 0.375 INCH
N/A
37.99 / 42.49 FT
10281.102 FT
304991.286 LB
29.70 LB/FT
11.58 / 12.95 MTS
3133.680 MTS
138341.000 KG
44.20 KG/M
193.68 X 9.52 MM
TRACKING / RASTREABILIDAD Type / Tipo: SR 15.2 Heat N° Colada N° 40581 40581 40591 40591 40591 40591 40591 40591
Pipe N° Tubo N° 304 312 20 95 105 195 205 229
Sample N° Muestra N° 81843 81844 81837 81838 81839 81840 81841 81842
Tracking Pipe Number Número de Rastreabilidad de Tubo FROM 301 TO 316 FROM 301 TO 316 FROM 1 TO 100 FROM 1 TO 100 FROM 101 TO 200 FROM 101 TO 200 FROM 201 TO 234 FROM 201 TO 234
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038388
9/9
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
CASING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
REVESTIMIENTO
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
Quantity / Cantidad: 244 Pcs/Pz
7-5/8 X 0.375 INCH
N/A
37.99 / 42.49 FT
10281.102 FT
304991.286 LB
29.70 LB/FT
11.58 / 12.95 MTS
3133.680 MTS
138341.000 KG
44.20 KG/M
193.68 X 9.52 MM
This is to certify that the product described here has been manufactured, sampled, tested, and inspected in accordance with purchaser order requirements. This certificate is not a declaration of origin nor may it be used as a declaration of origin.
CUSTOMER . THIRD PARTY
Por el presente certificamos que el material aquí descrito ha sido fabricado, muestreado, ensayado e inspeccionado de acuerdo a los requisitos de su orden de compra. Este certificado no es, ni puede ser usado, como una declaración de origen.
TENARIS QUALITY DEPARTMENT SIGNATURE
INSPECTION COMPANY COMPAÑÍA DE INSPECCIÓN
NO APLICA Employee Name: N/A
QUALITY CERTIFICATION DEPT.
CHIEF OF QUALITY CERTIFICATION DEPT.
Quality System Certified
DEPTO. DE CERTIFICACIÓN DE CALIDAD
RESPONSABLE DEL DEPTO. DE CERTIFICACIÓN DE CALIDAD
N° 110950
Alejandro Molina Iglesias
Juan Fco. Renato Avila Aldapa
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038389X
1/7
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 244 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM
TENSILE TEST / ENSAYO DE TENSIÓN Specimen condition
Specimen dimensions
Test
Y.S.
U.T.S.
Sample N° Zone
Pipe N°
Condición de la probeta
Dimensiones de la probeta
temp
Eul 0.5%
Req.
Colada N° Muestra N° Zona
Tubo N°
Ls
Heat N°
Sc
Type
Ori
Tipo 40372 40372
92580 92581
E1 E2
10005 10006
B B
AM AM
Ss Ss
L L
Size
Area
Temp. Min: 80 000
Min: 95 000
Tamaño
Sección
ensayo Max: 95 000
Max: --
mm
mm2
°C
psi
psi
37.96 x 21.00 37.87 x 19.65
797,16 744,15
RT RT
85 295 82 636
104 852 102 975
Y.S./U.T.S Req. Max.
Elongation / Alargamiento Lo
Min.
Obt.
-0.81 0.80
inch
%
%
2 2
21.6 21.3
44.0 46.0
AM: As manufactured / Según proceso de fabricación
Ls: Location of sample / Ubicación de la muestra
Req. Max: Required maximum / Máximo requerido
U.T.S: Ultimate tensile strength / Resistencia
B: Body / Cuerpo
Max: Maximum / Máximo
Req: Required / Requerido
Y.S: Yield strength / Fluencia
E1 / E2: Ends of Sampling / Extremos de Muestra
Min: Minimum / Mínimo
RT: Room temperature / Temperatura ambiente
L: Longitudinal / Longitudinal
Obt: Obtained / Obtenido
Sc: Specimen condition / Condición de la probeta
Lo: Initial length / Longitud inicial
Ori: Orientation / Orientación
Ss: Strip specimen / Muestra rectangular
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038389X
2/7
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 244 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM
CHEMICAL COMPOSITION / COMPOSICIÓN QUÍMICA Composition % / Composición % X 100
H
Heat N°
Sample N° P
Colada N° Muestra N° 40372 40372 40372
00001 92580 92581
X 1000
C
Mn
Si
Cr
Mo
S
P
Ni
Max
43
190
45
Min
--
--
--
--
--
30
30
--
--
--
--
Max
43
190
45
Min
--
--
--
--
--
30
30
--
--
--
--
H P P
23 22 22
121 122 122
30 31 31
50 51 51
8.1 8 8
1.7 0.8 0.7
12 13 13
H: Heat / Colada
X 10000
V
Cu
Al
Sn
As
Nb
250
--
350
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
250
--
350
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
60 60 60
0 0 0
134 140 140
20 19 20
8 8 8
5 5 5
0 0 0
27 27 28
16 17 15
18 18 19
74 74 74
Max: Maximum / Máximo
Ti
Ca
B
N
Min: Minimum / Mínimo
P: Product / Producto
THROUGH WALL HARDNESS / DUREZA EN EL ESPESOR Required values Valores requeridos Heat N°
Individuals / Individuales Min: --
Max: 22.0
Sample N° Zone
Pipe N°
Colada N° Muestra N° Zona
Tubo N°
Ls
Sc
10005 10006
B B
AM AM
40372 40372
92580 92581
E1 E2
Average / Promedio
Var: --
Specimen condition
Min: --
Quad. 1 1
Max: --
Hardness type HRC Var: --
Scale
Dureza tipo
OD
MW
ID
Var.
Escala
1
2
3
Avg.
1
2
3
Avg.
1
2
3
Avg.
HRC HRC
15.4 17.5
16.9 17.3
17.9 17.3
16.7 17.4
16.8 17.2
18.9 16.9
17.9 17.2
17.9 17.1
16.0 15.9
17.8 16.3
17.9 17.8
17.2 16.7
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
1.1 0.7
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038389X
3/7
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 244 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM
THROUGH WALL HARDNESS / DUREZA EN EL ESPESOR AM: As manufactured / Según proceso de fabricación
ID: Internal diameter / Diámetro interno
MW: Middle wall / Centro
Avg: Average / Promedio
Ls: Location of sample / Ubicación de la muestra
OD: Outside diameter / Diámetro externo
Var: Variation / Variación
B: Body / Cuerpo
Max: Maximum / Máximo
Quad: Quadrant / Cuadrante
E1 / E2: Ends of Sampling / Extremos de Muestra
Min: Minimum / Mínimo
Sc: Specimen condition / Condición de la probeta
IMPACT TEST / ENSAYO DE IMPACTO Type/Tipo: CHARPY V Position/Posición: N/A
Orientation/Orientación: L Temp: -46 Unit/Unidad: °C
Unit / Unidad: ft.lb Ind.Min.Req: 10 Req.Min.Avg: 15
Shear area / Área frágil % Ind.Min.Req: -Req.Min.Avg: --
Heat N° Sample N° Zone
Pipe N°
T.T
Size / Tamaño
Colada N° Muestra N° Zona
Tubo N°
Ls
Sc
°C
mm
1
2
3
Avg.
1
2
3
Avg.
10005 10006
B B
AM AM
-46 -46
10 x 10 10 x 10
77.0 85.0
75.0 93.0
91.0 85.0
81.0 88.0
60 60
60 60
60 60
60.0 60.0
40372 40372
92580 92581
E1 E2
Results / Resultados
Results / Resultados
AM: As manufactured / Según proceso de fabricación
Ind. Min. Req: Invidual Minimum Required / Requeri
Req. Min. Avg: Required minimum average / Promedio
Avg: Average / Promedio
do Mínimimo Individual
mínimo requerido
B: Body / Cuerpo
L: Longitudinal / Longitudinal
Sc: Specimen condition / Condición de la probeta
E1 / E2: Ends of Sampling / Extremos de Muestra
Ls: Location of sample / Ubicación de la muestra
T.T: Test temperature / Temperatura de ensayo
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Temp: Temperature / Temperatura
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038389X
4/7
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 244 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM
IMPACT TEST / ENSAYO DE IMPACTO Type/Tipo: CHARPY V Position/Posición: N/A
Temp: 0
Orientation/Orientación: T Unit/Unidad: °C
Unit / Unidad: ft.lb Ind.Min.Req: 12 Req.Min.Avg: 18
Shear area / Área frágil % Ind.Min.Req: 0 Req.Min.Avg: --
Heat N° Sample N° Zone
Pipe N°
T.T
Size / Tamaño
Colada N° Muestra N° Zona
Tubo N°
Ls
Sc
°C
mm
1
2
3
Avg.
1
2
3
Avg.
10005 10006
B B
AM AM
0 0
10 x 10 10 x 10
132.0 137.0
137.0 133.0
138.0 132.0
136.0 134.0
100 100
100 100
100 100
100.0 100.0
40372 40372
92580 92581
E1 E2
Results / Resultados
Results / Resultados
AM: As manufactured / Según proceso de fabricación
Ind. Min. Req: Invidual Minimum Required / Requeri
mínimo requerido
Avg: Average / Promedio
do Mínimimo Individual
Sc: Specimen condition / Condición de la probeta
B: Body / Cuerpo
Ls: Location of sample / Ubicación de la muestra
T.T: Test temperature / Temperatura de ensayo
E1 / E2: Ends of Sampling / Extremos de Muestra
Req. Min. Avg: Required minimum average / Promedio
T: Transversal / Transversal
Temp: Temperature / Temperatura
HEAT TREATMENT / TRATAMIENTO TÉRMICO Heat treatment / Tratamiento térmico: Pipe / Tubo Quench media of heat treatment process / Medio de enfriamento del tratamiento térmico: Water / Agua Temperature Scale / Escala de Temperatura: °C Type Tipo Quenched Tempered This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038389X
5/7
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 244 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM
THREADING / ROSCADO Threading Roscado THE PRODUCT HAS BEEN THREADED ACCORDING TO LICENSEE AND TENARISTAMSA INTERNAL P ROCEDURES
EL PRODUCTO HA SIDO ROSCADO DE ACUERDO A LICENCIA Y LOS PROCEDIMIENTOS INTERNOS DE TENARISTAMSA
SUPPLEMENTARY INFORMATION / INFORMACIÓN SUPLEMENTARIA Supplementary Information Información Suplementaria Manufactured by TenarisTamsa Steel making process: Electric Arc Furnace-Ladle Furnace-Continuous Casting Machine. Fully Killed Steel Material free from Mercury contamination Not repaired by welding Non destructive test. Satisfactory Inspection method WMPI COUPLING, O.D. & I.D., LONG. CERTIFICATE ACCORDING TO ISO11960/API5CT SR15
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Fabricado por TenarisTamsa Fabricación del acero: Horno de Arco Eléctrico-Horno de Afinación-Máquina de Colada Continua. Acero calmado con aluminio Material libre de contaminación de Mercurio No reparado por soldadura Control no destructivo. Satisfactorio Método de inspección WMPI COUPLING, O.D. & I.D., LONG. CERTIFICATE ACCORDING TO ISO11960/API5CT SR15
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038389X
6/7
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 244 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM
MARKING / MARCACIÓN Marking Marcación COUPLING STENCIL: TENARIS TM ISO 11960 / 5CT-0124 ? #FE2 L S13 O.P 137758 / #C***** T-XX WHERE : Coupling stock number T-XX: Heat number #C*****: Manufacturing Date #FE2: API; Monogram ?:
COPLE ESTARCIDO: TENARIS TM ISO 11960 / 5CT-0124 ? #FE2 L S13 O.P 137758 / #C***** T-XX DONDE : Numero de tubo para cople T-XX: Numero de colada #C*****: Fecha de Fabricación #FE2: Monograma; API ?:
TRACKING / RASTREABILIDAD Type / Tipo: SR 15.2 Heat N° Colada N° 40372 40372
Pipe N° Tubo N° 10005 10006
Sample N° Muestra N° 92580 92581
Tracking Pipe Number Número de Rastreabilidad de Tubo FROM 10001 TO 10009 FROM 10001 TO 10009
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08038389X
7/7
Date / Día: 11 July 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 4
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/04
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 244 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM This is to certify that the product described here has been manufactured, sampled, tested, and inspected in accordance with purchaser order requirements. This certificate is not a declaration of origin nor may it be used as a declaration of origin.
CUSTOMER . THIRD PARTY
Por el presente certificamos que el material aquí descrito ha sido fabricado, muestreado, ensayado e inspeccionado de acuerdo a los requisitos de su orden de compra. Este certificado no es, ni puede ser usado, como una declaración de origen.
TENARIS QUALITY DEPARTMENT SIGNATURE
INSPECTION COMPANY COMPAÑÍA DE INSPECCIÓN
NO APLICA Employee Name: N/A
QUALITY CERTIFICATION DEPT.
CHIEF OF QUALITY CERTIFICATION DEPT.
Quality System Certified
DEPTO. DE CERTIFICACIÓN DE CALIDAD
RESPONSABLE DEL DEPTO. DE CERTIFICACIÓN DE CALIDAD
N° 110950
Alejandro Molina Iglesias
Juan Fco. Renato Avila Aldapa
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08051099
1/8
Date / Día: 13 September 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 11
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/11
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
CASING SEAMLESS
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
REVESTIMIENTO SIN COSTURA
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/API 5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
Quantity / Cantidad: 235 Pcs/Pz
7-5/8 X 0.375 INCH
N/A
37.99 / 42.49 FT
9710.564 FT
288938.077 LB
29.70 LB/FT
11.58 / 12.95 MTS
2959.780 MTS
131060.000 KG
44.20 KG/M
193.68 X 9.52 MM
TENSILE TEST / ENSAYO DE TENSIÓN Specimen condition
Specimen dimensions
Test
Y.S.
U.T.S.
Sample N° Zone
Pipe N°
Condición de la probeta
Dimensiones de la probeta
temp
Eul 0.50 %.
Req.
Colada N° Muestra N° Zona
Tubo N°
Ls
Heat N°
Sc
Type
Ori
Tipo 41345 41345 41345 41345 41345 41345
84093 84094 84096 84097 84098 84099
E1 E2 E1 E2 E1 E2
5 95 110 195 205 243
B B B B B B
AM AM AM AM AM AM
Ss Ss Ss Ss Ss Ss
L L L L L L
Size
Area
Temp. Min: 80 000
Min: 95 000
Tamaño
Sección
ensayo Max: 95 000
Max: --
mm
mm2
°C
psi
psi
25.25 X 09.18 25.54 X 09.64 25.52 X 09.74 25.24 X 09.71 25.26 X 09.96 25.30 X 09.31
231,80 247,83 248,56 245,08 251,59 235,54
RT RT RT RT RT RT
91 824 92 350 93 488 93 274 93 630 93 602
105 350 105 435 106 957 105 933 107 241 107 569
Y.S./U.T.S Req. Max.
Elongation / Alargamiento Lo
Min.
Obt.
-0.87 0.88 0.87 0.88 0.87 0.87
inch
%
%
2 2 2 2 2 2
16.9 17.1 17.1 17.1 17.1 16.9
31.0 31.0 29.0 30.0 33.0 29.0
AM: As manufactured / Según proceso de fabricación
Ls: Location of sample / Ubicación de la muestra
Req. Max: Required maximum / Máximo requerido
U.T.S: Ultimate tensile strength / Resistencia
B: Body / Cuerpo
Max: Maximum / Máximo
Req: Required / Requerido
Y.S: Yield strength / Fluencia
E1 / E2: Ends of Sampling / Extremos de Muestra
Min: Minimum / Mínimo
RT: Room temperature / Temperatura ambiente
L: Longitudinal / Longitudinal
Obt: Obtained / Obtenido
Sc: Specimen condition / Condición de la probeta
Lo: Initial length / Longitud inicial
Ori: Orientation / Orientación
Ss: Strip specimen / Muestra rectangular
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08051099
2/8
Date / Día: 13 September 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 11
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/11
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
CASING SEAMLESS
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
REVESTIMIENTO SIN COSTURA
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/API 5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
Quantity / Cantidad: 235 Pcs/Pz
7-5/8 X 0.375 INCH
N/A
37.99 / 42.49 FT
9710.564 FT
288938.077 LB
29.70 LB/FT
11.58 / 12.95 MTS
2959.780 MTS
131060.000 KG
44.20 KG/M
193.68 X 9.52 MM
CHEMICAL COMPOSITION / COMPOSICIÓN QUÍMICA Composition % / Composición % X 100
H
Heat N°
Sample N° P
Colada N° Muestra N° 41345 41345 41345 41345 41345 41345 41345
00001 84093 84094 84096 84097 84098 84099
H: Heat / Colada
X 1000
C
Mn
Si
Cr
Mo
S
P
Ni
Max
43
190
45
Min
--
--
--
--
--
30
30
--
--
--
--
Max
43
190
45
Min
--
--
--
--
--
30
30
--
--
--
--
H P P P P P P
24 25 25 25 25 25 25
130 131 131 130 131 130 130
28 29 28 28 29 28 28
8 8 8 8 8 8 8
1.3 1.3 1.4 1.3 1.3 1.3 1.3
2.7 2.7 2.7 2.7 2.4 2.3 2.7
15 13 14 14 13 13 13
X 10000
V
Cu
Al
Sn
As
250
--
350
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
250
--
350
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
60 60 60 60 60 50 60
0 0 0 0 0 0 0
166 164 164 164 165 163 164
21 21 21 22 21 22 22
13 12 12 12 12 12 12
5 5 5 5 5 5 5
0 0 0 0 0 0 0
30 31 31 31 32 31 29
18 20 17 22 17 18 20
20 20 20 20 20 20 20
59 59 59 59 59 59 59
Max: Maximum / Máximo
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Nb
Ti
Ca
B
N
Min: Minimum / Mínimo
P: Product / Producto
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08051099
3/8
Date / Día: 13 September 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 11
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/11
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
CASING SEAMLESS
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
REVESTIMIENTO SIN COSTURA
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/API 5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
Quantity / Cantidad: 235 Pcs/Pz
7-5/8 X 0.375 INCH
N/A
37.99 / 42.49 FT
9710.564 FT
288938.077 LB
29.70 LB/FT
11.58 / 12.95 MTS
2959.780 MTS
131060.000 KG
44.20 KG/M
193.68 X 9.52 MM
THROUGH WALL HARDNESS / DUREZA EN EL ESPESOR Required values Valores requeridos Heat N°
Individuals / Individuales Min: --
Max: 22.0
Sample N° Zone
Pipe N°
Colada N° Muestra N° Zona
Tubo N°
Ls
Sc
00005 00095 00110 00195 00205 00243
B B B B B B
AM AM AM AM AM AM
41345 41345 41345 41345 41345 41345
84093 84094 84096 84097 84098 84099
E1 E2 E1 E2 E1 E2
Average / Promedio
Var: --
Specimen condition
Min: --
Quad. 1 1 1 1 1 1
Max: --
Hardness type HRC Var: --
Scale
Dureza tipo
OD
MW
ID
Var.
Escala
1
2
3
Avg.
1
2
3
Avg.
1
2
3
Avg.
HRC HRC HRC HRC HRC HRC
18.6 16.3 19.0 13.6 18.8 18.6
19.4 17.6 18.9 18.8 18.9 18.8
19.1 17.7 19.2 18.9 18.9 19.0
19.0 17.2 19.0 17.1 18.9 18.8
19.3 17.5 19.7 18.7 18.9 18.4
19.5 17.4 19.4 18.5 18.7 18.9
19.2 18.9 19.5 13.6 18.9 18.9
19.3 17.9 19.5 16.9 18.8 18.7
19.0 17.6 19.2 18.6 18.6 18.4
19.7 17.5 18.9 19.0 19.5 18.3
20.0 17.0 19.8 18.3 18.6 18.5
19.6 17.4 19.3 18.6 18.9 18.4
AM: As manufactured / Según proceso de fabricación
ID: Internal diameter / Diámetro interno
MW: Middle wall / Centro
Avg: Average / Promedio
Ls: Location of sample / Ubicación de la muestra
OD: Outside diameter / Diámetro externo
B: Body / Cuerpo
Max: Maximum / Máximo
Quad: Quadrant / Cuadrante
E1 / E2: Ends of Sampling / Extremos de Muestra
Min: Minimum / Mínimo
Sc: Specimen condition / Condición de la probeta
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
0.5 0.7 0.5 1.7 0.1 0.4 Var: Variation / Variación
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08051099
4/8
Date / Día: 13 September 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 11
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/11
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
CASING SEAMLESS
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
REVESTIMIENTO SIN COSTURA
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/API 5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
Quantity / Cantidad: 235 Pcs/Pz
7-5/8 X 0.375 INCH
N/A
37.99 / 42.49 FT
9710.564 FT
288938.077 LB
29.70 LB/FT
11.58 / 12.95 MTS
2959.780 MTS
131060.000 KG
44.20 KG/M
193.68 X 9.52 MM
IMPACT TEST / ENSAYO DE IMPACTO Type/Tipo: CHARPY V Position/Posición: N/A
Orientation/Orientación: L Temp: -51 Unit/Unidad: °F
Unit / Unidad: ft.lb Ind.Min.Req: 8 Req.Min.Avg: 12
Shear area / Área frágil % Ind.Min.Req: -Req.Min.Avg: --
Heat N° Sample N° Zone
Pipe N°
T.T
Size / Tamaño
Colada N° Muestra N° Zona
Tubo N°
Ls
Sc
°F
mm
1
2
3
Avg.
1
2
3
Avg.
00005 00095 00110 00195 00205 00243
B B B B B B
AM AM AM AM AM AM
-51 -51 -51 -51 -51 -51
10 x 7.5 10 x 7.5 10 x 7.5 10 x 7.5 10 x 7.5 10 x 7.5
108.0 108.0 95.0 104.0 103.0 79.0
106.0 113.0 101.0 102.0 95.0 96.0
99.0 106.0 101.0 99.0 95.0 97.0
104.0 109.0 99.0 102.0 98.0 91.0
100 100 100 100 100 85
100 100 100 100 100 100
100 100 100 100 100 100
100.0 100.0 100.0 100.0 100.0 95.0
41345 41345 41345 41345 41345 41345
84093 84094 84096 84097 84098 84099
E1 E2 E1 E2 E1 E2
Results / Resultados
Results / Resultados
AM: As manufactured / Según proceso de fabricación
Ind. Min. Req: Invidual Minimum Required / Requeri
Req. Min. Avg: Required minimum average / Promedio
Avg: Average / Promedio
do Mínimimo Individual
mínimo requerido
B: Body / Cuerpo
L: Longitudinal / Longitudinal
Sc: Specimen condition / Condición de la probeta
E1 / E2: Ends of Sampling / Extremos de Muestra
Ls: Location of sample / Ubicación de la muestra
T.T: Test temperature / Temperatura de ensayo
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Temp: Temperature / Temperatura
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08051099
5/8
Date / Día: 13 September 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 11
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/11
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
CASING SEAMLESS
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
REVESTIMIENTO SIN COSTURA
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/API 5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 235 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
7-5/8 X 0.375 INCH
N/A
193.68 X 9.52 MM
Length / Longitud:
37.99 / 42.49 FT
9710.564 FT
288938.077 LB
29.70 LB/FT
11.58 / 12.95 MTS
2959.780 MTS
131060.000 KG
44.20 KG/M
HYDROSTATIC TEST / PRUEBA HIDRÁULICA Pressure / Presión
Time / Tiempo
Unit / Unidad.
Value / Valor
Seconds / Segundos
PSI
6,300
5
Results / Resultado
Satisfactory / Satisfactorio
HEAT TREATMENT / TRATAMIENTO TÉRMICO Heat treatment / Tratamiento térmico: Pipe / Tubo Quench media of heat treatment process / Medio de enfriamento del tratamiento térmico: Water / Agua Temperature Scale / Escala de Temperatura: °C Type Tipo Quenched Tempered
THREADING / ROSCADO THE PRODUCT HAS BEEN THREADED ACCORDING TO LICENSEE AND TENARISTAMSA INTERNAL P ROCEDURES
Threading Roscado EL PRODUCTO HA SIDO ROSCADO DE ACUERDO A LICENCIA Y LOS PROCEDIMIENTOS INTERNOS DE TENARISTAMSA
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08051099
6/8
Date / Día: 13 September 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 11
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/11
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
CASING SEAMLESS
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
REVESTIMIENTO SIN COSTURA
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/API 5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
Quantity / Cantidad: 235 Pcs/Pz
7-5/8 X 0.375 INCH
N/A
37.99 / 42.49 FT
9710.564 FT
288938.077 LB
29.70 LB/FT
11.58 / 12.95 MTS
2959.780 MTS
131060.000 KG
44.20 KG/M
193.68 X 9.52 MM
SUPPLEMENTARY INFORMATION / INFORMACIÓN SUPLEMENTARIA Manufactured by TenarisTamsa Steel making process: Electric Arc Furnace-Ladle Furnace-Continuous Casting Machine. Fully Killed Steel Material free from Mercury contamination Not repaired by welding Non destructive test. Satisfactory Inspection method SR-1 - EMI - FLVI - SEA Drift. Diameter 171.46 MM / 6.750 INCH Length 152.4 MM/ 6.000 INCH CERTIFICATE ACCORDING TO ISO11960/API5CT SR15
Supplementary Information Información Suplementaria Fabricado por TenarisTamsa Fabricación del acero: Horno de Arco Eléctrico-Horno de Afinación-Máquina de Colada Continua. Acero calmado con aluminio Material libre de contaminación de Mercurio No reparado por soldadura Control no destructivo. Satisfactorio Método de inspección SR-1 - EMI - FLVI - SEA Mandril. Diámetro. 171.46 MM / 6.750 INCH Longitud 152.4 MM/ 6.000 INCH CERTIFICATE ACCORDING TO ISO11960/API5CT SR15
MARKING / MARCACIÓN PIPE STENCIL: #T***** = TENARIS TM ISO 11960 / 5CT-0124 ? #FE2 7-5/8 29.70L S S1 P 6300 PSI BC D #T***** HEAT #C**** O.P 138308 / #P*** FT MADE IN MEXICO WHERE : Heat number #C****:
Marking Marcación MASCARILLA DE TUBO ESTARCIDO: #T***** = TENARIS TM ISO 11960 / 5CT-0124 ? #FE2 7-5/8 29.70L S S1 P 6300 PSI BC D #T***** HEAT #C**** O.P 138308 / #P*** FT MADE IN MEXICO DONDE : Numero de colada #C****:
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08051099
7/8
Date / Día: 13 September 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 11
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/11
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
CASING SEAMLESS
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
REVESTIMIENTO SIN COSTURA
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/API 5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 235 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
7-5/8 X 0.375 INCH
N/A
193.68 X 9.52 MM
Length / Longitud:
37.99 / 42.49 FT
9710.564 FT
288938.077 LB
29.70 LB/FT
11.58 / 12.95 MTS
2959.780 MTS
131060.000 KG
44.20 KG/M
MARKING / MARCACIÓN Marking Marcación Fecha de Fabricación #FE2: Longitud de tubo en Fts #P***: Num. de Rastreab. Total #T*****: Numero de cuadrilla =: Monograma; API ?:
Manufacturing Date #FE2: Pipe length in Fts #P***: Total Traceability Number #T*****: Shift number =: API; Monogram ?:
SUMMARY REPORT / REPORTE RESUMEN Heat N° Colada N°
Quantity Cantidad (Pieces)
(Ft.)
(Mts.)
Weight Peso (Tons)
41345
235
9,710.56
2,959.78
131.06
Average length per pipe Longitud promedio por tubo (Ft.) (Mts.) 41.322
12.595
Length Longitud
Nominal weight per pipe Peso nominal por tubo (Lb/Ft) (Kg/Mts) 29.755
44.28
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08051099
8/8
Date / Día: 13 September 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 11
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/11
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
CASING SEAMLESS
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
REVESTIMIENTO SIN COSTURA
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/API 5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
Quantity / Cantidad: 235 Pcs/Pz
7-5/8 X 0.375 INCH
N/A
37.99 / 42.49 FT
9710.564 FT
288938.077 LB
29.70 LB/FT
11.58 / 12.95 MTS
2959.780 MTS
131060.000 KG
44.20 KG/M
193.68 X 9.52 MM
TRACKING / RASTREABILIDAD Type / Tipo: SR 15.2 Heat N° Colada N° 41345 41345 41345 41345 41345 41345
Pipe N° Tubo N° 5 95 110 195 205 243
Sample N° Muestra N° 84093 84094 84096 84097 84098 84099
Tracking Pipe Number Número de Rastreabilidad de Tubo FROM 1 TO 100 FROM 1 TO 100 FROM 101 TO 200 FROM 101 TO 200 FROM 201 TO 248 FROM 201 TO 248
This is to certify that the product described here has been manufactured, sampled, tested, and inspected in accordance with purchaser order requirements. This certificate is not a declaration of origin nor may it be used as a declaration of origin.
CUSTOMER . THIRD PARTY
Por el presente certificamos que el material aquí descrito ha sido fabricado, muestreado, ensayado e inspeccionado de acuerdo a los requisitos de su orden de compra. Este certificado no es, ni puede ser usado, como una declaración de origen.
TENARIS QUALITY DEPARTMENT SIGNATURE
INSPECTION COMPANY COMPAÑÍA DE INSPECCIÓN
Company Name: N/A Employee Name: N/A
QUALITY CERTIFICATION DEPT.
CHIEF OF QUALITY CERTIFICATION DEPT.
Quality System Certified
DEPTO. DE CERTIFICACIÓN DE CALIDAD
RESPONSABLE DEL DEPTO. DE CERTIFICACIÓN DE CALIDAD
N° 110950
Israel de la Cruz Martínez
Juan Fco. Renato Avila Aldapa
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08051100X
1/8
Date / Día: 13 September 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 11
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/11
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING SEAMLESS
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE SIN COSTURA
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/API 5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 235 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM
TENSILE TEST / ENSAYO DE TENSIÓN Specimen condition
Specimen dimensions
Test
Y.S.
U.T.S.
Sample N° Zone
Pipe N°
Condición de la probeta
Dimensiones de la probeta
temp
Eul 0.50 %.
Req.
Colada N° Muestra N° Zona
Tubo N°
Ls
Heat N°
Sc
Type
Ori
Tipo 40372 40372 40881 40881
92580 92581 93649 93708
E1 E2 E1 E1
10005 10006 10002 10101
B B B B
AM AM AM AM
Ss Ss Ss Ss
L L L L
Size
Area
Temp. Min: 80 000
Min: 95 000
Tamaño
Sección
ensayo Max: 95 000
Max: --
mm
mm2
°C
psi
psi
37.96 X 21.00 37.87 X 19.65 38.20 X 21.10 37.89 X 19.12
797,16 744,15 806,02 729,02
RT RT RT RT
85 295 82 636 85 253 86 575
104 852 102 975 104 226 103 842
Y.S./U.T.S Req. Max.
Elongation / Alargamiento Lo
Min.
Obt.
-0.81 0.80 0.82 0.83
inch
%
%
2 2 2 2
21.6 21.3 21.6 21.2
44.0 46.0 42.0 41.0
AM: As manufactured / Según proceso de fabricación
Ls: Location of sample / Ubicación de la muestra
Req. Max: Required maximum / Máximo requerido
U.T.S: Ultimate tensile strength / Resistencia
B: Body / Cuerpo
Max: Maximum / Máximo
Req: Required / Requerido
Y.S: Yield strength / Fluencia
E1 / E2: Ends of Sampling / Extremos de Muestra
Min: Minimum / Mínimo
RT: Room temperature / Temperatura ambiente
L: Longitudinal / Longitudinal
Obt: Obtained / Obtenido
Sc: Specimen condition / Condición de la probeta
Lo: Initial length / Longitud inicial
Ori: Orientation / Orientación
Ss: Strip specimen / Muestra rectangular
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08051100X
2/8
Date / Día: 13 September 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 11
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/11
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING SEAMLESS
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE SIN COSTURA
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/API 5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 235 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM
CHEMICAL COMPOSITION / COMPOSICIÓN QUÍMICA Composition % / Composición % X 100
H
Heat N°
Sample N° P
Colada N° Muestra N° 40372 40372 40372 40881 40881 40881 40881 40881
00001 92580 92581 00001 93649 93650 93708 93709
H: Heat / Colada
X 1000
C
Mn
Si
Cr
Mo
S
P
Ni
Max
43
190
45
Min
--
--
--
--
--
30
30
--
--
--
--
Max
43
190
45
Min
--
--
--
--
--
30
30
--
--
--
--
H P P H P P P P
23 22 22 22 23 23 23 23
121 122 122 130 126 125 124 125
30 31 31 27 28 27 27 27
50 51 51 50 50 50 50 50
8.1 8 8 8.3 8.1 8.1 8.1 8.1
1.7 0.8 0.7 2.6 2.7 3.1 3.7 3.4
12 13 13 10 10 10 10 10
X 10000
V
Cu
Al
Sn
As
250
--
350
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
250
--
350
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
60 60 60 60 60 60 60 60
0 0 0 0 0 0 0 0
134 140 140 129 135 138 134 135
20 19 20 26 22 21 22 21
8 8 8 8 8 7 8 8
5 5 5 4 4 4 4 4
0 0 0 0 0 0 0 0
27 27 28 30 27 26 27 28
16 17 15 15 14 16 18 16
18 18 19 20 20 20 20 20
74 74 74 64 64 64 64 64
Max: Maximum / Máximo
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Nb
Ti
Ca
B
N
Min: Minimum / Mínimo
P: Product / Producto
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08051100X
3/8
Date / Día: 13 September 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 11
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/11
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING SEAMLESS
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE SIN COSTURA
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/API 5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 235 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM
THROUGH WALL HARDNESS / DUREZA EN EL ESPESOR Required values Valores requeridos Heat N°
Individuals / Individuales Min: --
Max: 22.0
Sample N° Zone
Pipe N°
Colada N° Muestra N° Zona
Tubo N°
Ls
Sc
10005 10006 10002 10101
B B B B
AM AM AM AM
40372 40372 40881 40881
92580 92581 93649 93708
E1 E2 E1 E1
Average / Promedio
Var: --
Specimen condition
Min: --
Quad. 1 1 1 1
Max: --
Hardness type HRC Var: --
Scale
Dureza tipo
OD
MW
ID
Var.
Escala
1
2
3
Avg.
1
2
3
Avg.
1
2
3
Avg.
HRC HRC HRC HRC
15.4 17.5 17.7 17.7
16.9 17.3 17.0 18.8
17.9 17.3 17.9 17.5
16.7 17.4 17.5 18.0
16.8 17.2 19.7 17.5
18.9 16.9 19.9 18.2
17.9 17.2 19.6 18.6
17.9 17.1 19.7 18.1
16.0 15.9 17.1 18.0
17.8 16.3 17.4 17.5
17.9 17.8 19.6 19.6
17.2 16.7 18.0 18.4
AM: As manufactured / Según proceso de fabricación
ID: Internal diameter / Diámetro interno
MW: Middle wall / Centro
Avg: Average / Promedio
Ls: Location of sample / Ubicación de la muestra
OD: Outside diameter / Diámetro externo
B: Body / Cuerpo
Max: Maximum / Máximo
Quad: Quadrant / Cuadrante
E1 / E2: Ends of Sampling / Extremos de Muestra
Min: Minimum / Mínimo
Sc: Specimen condition / Condición de la probeta
1.1 0.7 2.2 0.4 Var: Variation / Variación
IMPACT TEST / ENSAYO DE IMPACTO Type/Tipo: CHARPY V Position/Posición: N/A
Orientation/Orientación: L Temp: -51 Unit/Unidad: °F
Unit / Unidad: ft.lb Ind.Min.Req: 10 Req.Min.Avg: 15
Shear area / Área frágil % Ind.Min.Req: -Req.Min.Avg: --
Heat N° Sample N° Zone
Pipe N°
T.T
Size / Tamaño
Colada N° Muestra N° Zona
Tubo N°
Ls
Sc
°F
mm
1
2
3
Avg.
1
2
3
Avg.
10005
B
AM
-51
10 x 10
77.0
75.0
91.0
81.0
60
60
60
60.0
40372
92580
E1
Results / Resultados
Results / Resultados
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08051100X
4/8
Date / Día: 13 September 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 11
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/11
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING SEAMLESS
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE SIN COSTURA
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/API 5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 235 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM
IMPACT TEST / ENSAYO DE IMPACTO Type/Tipo: CHARPY V Position/Posición: N/A
Orientation/Orientación: L Temp: -51 Unit/Unidad: °F
Unit / Unidad: ft.lb Ind.Min.Req: 10 Req.Min.Avg: 15
Shear area / Área frágil % Ind.Min.Req: -Req.Min.Avg: --
Heat N° Sample N° Zone
Pipe N°
T.T
Size / Tamaño
Colada N° Muestra N° Zona
Tubo N°
Ls
Sc
°F
mm
1
2
3
Avg.
1
2
3
Avg.
10006 10002 10101
B B B
AM AM AM
-51 -51 -51
10 x 10 10 x 10 10 x 10
85.0 95.0 105.0
93.0 81.0 124.0
85.0 88.0 99.0
88.0 88.0 109.0
60 50 100
60 50 100
60 50 100
60.0 50.0 100.0
40372 40881 40881
92581 93649 93708
E2 E1 E1
Results / Resultados
Results / Resultados
AM: As manufactured / Según proceso de fabricación
Ind. Min. Req: Invidual Minimum Required / Requeri
Req. Min. Avg: Required minimum average / Promedio
Avg: Average / Promedio
do Mínimimo Individual
mínimo requerido
B: Body / Cuerpo
L: Longitudinal / Longitudinal
Sc: Specimen condition / Condición de la probeta
E1 / E2: Ends of Sampling / Extremos de Muestra
Ls: Location of sample / Ubicación de la muestra
T.T: Test temperature / Temperatura de ensayo
Type/Tipo: CHARPY V Position/Posición: N/A
Orientation/Orientación: T Temp: 32 Unit/Unidad: °F
Unit / Unidad: ft.lb Ind.Min.Req: 12 Req.Min.Avg: 18
Shear area / Área frágil % Ind.Min.Req: 0 Req.Min.Avg: --
Heat N° Sample N° Zone
Pipe N°
T.T
Size / Tamaño
Colada N° Muestra N° Zona
Tubo N°
Ls
Sc
°F
mm
1
2
3
Avg.
1
2
3
Avg.
10005 10006 10002 10101
B B B B
AM AM AM AM
32 32 32 32
10 x 10 10 x 10 10 x 10 10 x 10
132.0 137.0 138.0 161.0
137.0 133.0 142.0 159.0
138.0 132.0 145.0 156.0
136.0 134.0 142.0 159.0
100 100 100 100
100 100 100 100
100 100 100 100
100.0 100.0 100.0 100.0
40372 40372 40881 40881
92580 92581 93649 93708
E1 E2 E1 E1
Temp: Temperature / Temperatura
Results / Resultados
Results / Resultados
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08051100X
5/8
Date / Día: 13 September 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 11
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/11
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING SEAMLESS
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE SIN COSTURA
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/API 5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 235 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM
IMPACT TEST / ENSAYO DE IMPACTO AM: As manufactured / Según proceso de fabricación
Ind. Min. Req: Invidual Minimum Required / Requeri
mínimo requerido
Avg: Average / Promedio
do Mínimimo Individual
Sc: Specimen condition / Condición de la probeta
B: Body / Cuerpo
Ls: Location of sample / Ubicación de la muestra
T.T: Test temperature / Temperatura de ensayo
E1 / E2: Ends of Sampling / Extremos de Muestra
Req. Min. Avg: Required minimum average / Promedio
T: Transversal / Transversal
Temp: Temperature / Temperatura
HEAT TREATMENT / TRATAMIENTO TÉRMICO Heat treatment / Tratamiento térmico: Pipe / Tubo Quench media of heat treatment process / Medio de enfriamento del tratamiento térmico: Water / Agua Temperature Scale / Escala de Temperatura: °C Type Tipo Quenched Tempered
THREADING / ROSCADO THE PRODUCT HAS BEEN THREADED ACCORDING TO LICENSEE AND TENARISTAMSA INTERNAL P ROCEDURES
Threading Roscado EL PRODUCTO HA SIDO ROSCADO DE ACUERDO A LICENCIA Y LOS PROCEDIMIENTOS INTERNOS DE TENARISTAMSA
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08051100X
6/8
Date / Día: 13 September 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 11
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/11
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING SEAMLESS
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE SIN COSTURA
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/API 5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 235 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM
SUPPLEMENTARY INFORMATION / INFORMACIÓN SUPLEMENTARIA Manufactured by TenarisTamsa Steel making process: Electric Arc Furnace-Ladle Furnace-Continuous Casting Machine. Fully Killed Steel Material free from Mercury contamination Not repaired by welding Non destructive test. Satisfactory Inspection method WMPI COUPLING, O.D. & I.D., LONG. CERTIFICATE ACCORDING TO ISO11960/API5CT SR15
Supplementary Information Información Suplementaria Fabricado por TenarisTamsa Fabricación del acero: Horno de Arco Eléctrico-Horno de Afinación-Máquina de Colada Continua. Acero calmado con aluminio Material libre de contaminación de Mercurio No reparado por soldadura Control no destructivo. Satisfactorio Método de inspección WMPI COUPLING, O.D. & I.D., LONG. CERTIFICATE ACCORDING TO ISO11960/API5CT SR15
MARKING / MARCACIÓN COUPLING STENCIL: TENARIS TM ISO 11960 / 5CT-0124 ? #FE2 L S13 O.P 138308 / #C***** T-XX WHERE : Coupling stock number T-XX: Heat number #C*****: Manufacturing Date #FE2:
Marking Marcación COPLE ESTARCIDO: TENARIS TM ISO 11960 / 5CT-0124 ? #FE2 L S13 O.P 138308 / #C***** T-XX DONDE : Numero de tubo para cople T-XX: Numero de colada #C*****: Fecha de Fabricación #FE2:
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08051100X
7/8
Date / Día: 13 September 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 11
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/11
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING SEAMLESS
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE SIN COSTURA
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/API 5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 235 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM
MARKING / MARCACIÓN Marking Marcación Monograma; API ?:
API; Monogram ?:
TRACKING / RASTREABILIDAD Type / Tipo: SR 15.2 Heat N° Colada N° 40881 40881 40372 40372 40881 40881
Pipe N° Tubo N° 10002 10101 10005 10006 10006 10101
Sample N° Muestra N° 93649 93708 92580 92581 93650 93709
Tracking Pipe Number Número de Rastreabilidad de Tubo FROM 10001 TO 10009 10101 FROM 10001 TO 10009 FROM 10001 TO 10009 FROM 10001 TO 10009 10101
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171
MILL TEST CERTIFICATE CERTIFICADO DE PRUEBAS EN FABRICA ISO11960/API5CT SR15 Customer / Cliente: ENI US OPERATING CO
Number / Número:
Page / Página:
08051100X
8/8
Date / Día: 13 September 2008
Customer´s Order Item / Orden Cliente - Ítem:
Customer´s Reference / Ref. del Cliente:
800568 ITEM 11
800568
Manufacturer´s Works Order N° / Confirmación de Venta:
110765/11
Manufacturing Process / Proceso de Manufactura:
Product Type / Tipo de Producto:
Surface / Superficie:
SEAMLESS HOT ROLLED
COUPLING SEAMLESS
VARNISHED
LAMINADO EN CALIENTE SIN COSTURA
COPLE SIN COSTURA
BARNIZADO
Standard or Specification / Normas o Especificaciones:
Steel Grade / Grado de acero:
Ends / Extremos:
ISO 11960/API 5CT,EIGHTH EDITION
L80 1 PSL1
BUT. SEAL RING COUPL
Quantity / Cantidad: 235 Pcs/Pz
Nominal Weight / Peso Nominal:
BUT.COPLE ANILLO TEF Dimensions / Dimensiones:
Schedule / Cédula:
Length / Longitud:
7-5/8 X N/A INCH
N/A
N/A
N/A
193.68 X N/A MM This is to certify that the product described here has been manufactured, sampled, tested, and inspected in accordance with purchaser order requirements. This certificate is not a declaration of origin nor may it be used as a declaration of origin.
CUSTOMER . THIRD PARTY
Por el presente certificamos que el material aquí descrito ha sido fabricado, muestreado, ensayado e inspeccionado de acuerdo a los requisitos de su orden de compra. Este certificado no es, ni puede ser usado, como una declaración de origen.
TENARIS QUALITY DEPARTMENT SIGNATURE
INSPECTION COMPANY COMPAÑÍA DE INSPECCIÓN
Company Name: N/A Employee Name: N/A
QUALITY CERTIFICATION DEPT.
CHIEF OF QUALITY CERTIFICATION DEPT.
Quality System Certified
DEPTO. DE CERTIFICACIÓN DE CALIDAD
RESPONSABLE DEL DEPTO. DE CERTIFICACIÓN DE CALIDAD
N° 110950
Israel de la Cruz Martínez
Juan Fco. Renato Avila Aldapa
This certificate is issued by a computerized system and it is valid with electronic signature. On the original certificate the trade-mark green colored "Tenaris" is stamped. In case the owner of the original certificate would release a copy of it, he must attest its conformity to the original one taking upon himself the responsibility for any unlawful or not allowed use. Any alteration and/or falsification will be subjected to the law.
Este certificado se emite mediante sistema computarizado y es validado con firma electrónica. El certificado original posee impreso el logo Tenaris color verde. En caso de que el poseedor del certificado entregue una copia, deberá garantizar la conformidad con el original haciéndose responsable por cualquier uso ilegal o indebido. Cualquier alteración y/o falsificación estará sujeta a la ley.
FOR03171