Three-Phase Motors

General purpose motor TFO-KK

General purpose motor TFO-K

General purpose motor TFO-FK,FKK

0.4∼0.75kW 2,4 pole 0.4kW 6 pole 200V-50/60Hz, 220V-60Hz

1.5∼18.5kW 2 pole,1.5∼15kW 4 pole 0.75∼11kW 6 pole 200V-50/60Hz, 220V-60Hz

22∼ 55kW 2 pole,18.5∼ 55kW 4 pole 15∼ 45kW 6 pole 200V-50/60Hz, 220V-60Hz 400V-50/60Hz, 440V-60Hz

General purpose motor TFO-KK 75∼ 132kW 2,4 pole 55∼ 132kW 6 pole 200V-50/60Hz, 220V-60Hz 400V-50/60Hz, 440V-60Hz

Submersible Motors for Deep Well Pumps

High efficiency motor『Super Power』 TFO-HK,HKK 0.2∼160kW 4 pole 0.4∼160kW 2,6 pole 200V-50/60Hz, 220V-60Hz 400V-50/60Hz, 440V-60Hz

Water tight insulated wire type

Canned type

8∼ 14” 30∼225kW 2 pole 5.5∼200kW 2 pole 600V or less

6” 3.7∼ 45kW 2 pole 600V or less

Gear Motors

CA series Compact type gear motor

GA series General type gear motor

CA series Compact type gear motor with break

TOG：0.1∼0.2kW TFOG：0.3∼2.2kW 1.3/1.6 ∼300/360min-1

TFOG-K, KK：0.4∼11kW 7.5/9∼500/600min-1

TOG-K： 0.1∼ 0.2kW TFOG-K ： 0.4∼ 2.2kW 1.3/1.6∼ 300/360min-1 (HBC type break)

GA series General type gear motor with break TFOG-K,KK ： 0.4∼11kW 7.5/9∼ 500/600min-1 (0.4∼ 1.5kW FA type break)

High-Efficiency Permanent Magnet Motors

CA series Vertical type gear motor VTOG-K： 0.1 ∼ 0.2kW VTFOG-K： 0.3 ∼ 2.2kW 1.3/1.6∼300/360min-1

AC Servo

GA series Vertical type gear motor

PB series Medium-capacity planetary gear motor

VTFOG-K：0.4∼7.5kW 33/40∼500/600min-1

TFOG-KK： 11∼ 55kW 35/42∼ 300/360min-1

Web Controller

AD series 50W∼400W (1-phase 100V) 50W∼7.5kW (3-phase 200V) 500W∼7kW (3-phase 400V)

Web Controller

Stand-alone operation Pulse train input/Analogue input DeviceNetTM Compatible type SERCOS Compatible type

Web Server Function / E-mail sending Function Automatic Data Sending / Receiving Function Network communication Function Program memory 10-point type:16k steps 23-point type:16k steps I/0 points 10-point type:DC Input 6 points / Relay Output 4 points 23-point type:DC Input 13 points / Relay Output 10 points Analog Input 2ch / Output 1ch

200W∼ 90kW

General Purpose Inverters

WJ200 series (Sensorless vector control)

NE-S1 series (V/f) 0.2∼ 2.2kW (3-phase 200V) 0.2∼ 2.2kW (1-phase 200V)

0.1 ∼ 15kW (3-phase 200V) 0.4 ∼ 15kW (3-phase 400V) 0.1 ∼ 2.2kW (1-phase 200V) 0.4,0.75kW (1-phase 100V)

General Purpose Inverters

SJ700 series (Sensorless vector control) 0.4∼ 55kW (3-phase 200V) 0.75∼ 132kW 185,220,315,400kW (3-phase 400V)

Harmonics Suppression Units

X200 series (V/f) 0.2∼ 7.5kW (3-phase 200V) 0.4∼ 7.5kW (3-phase 400V) 0.2∼ 2.2kW (1-phase/3-phase 200V)

High Frequency Inverters

WJ200,NE-S1,X200, SJ700 and L700 series meet Global Standards.

L700 series (V/f) 11∼75kW (3-phase 200V) 11∼160kW (3-phase 400V)

HS900A series SJH300 series

1.5∼ 75kW (3-phase 200V) 1.5∼ 355kW (3-phase 400V)

EH-150/EHV EHV-CPU128/64/32/16 Processing speed:20ns I/O points: Max.4,224 Program Memory: Max.128k steps Comment Memory: Max.1Mbyte Integrated Ethernet/Serial/USB communication ports 7 Segment LED error display

2.5∼ 22kVA (3-phase 200V, 400V) Max. output frequency: 1500Hz

EH-ETH2 EH-RMD

EH-RMP

EH-SIO

EthernetTM Module

PROFIBUS® Module

Serial Communication Module

DeviceNetTM Module

Programming Software for EHV: Control Editor (Japanese/English/Simplified Chinese/Traditional Chinese Version)

EH-150

MICRO-EH(Board type)

H-302/H-702/H-1002/H-2002

LADDER EDITOR for Windows®

Processing speed: 1.0μs/0.1 μs/command I/O points: Max. 3,520 Program Memory: 4/8/16/48k steps Two communication ports Compact design with 10cm in height

Processing spped:0.9μs I/O points:10/14/20/23/28/40/64 Program Memory:3k steps/16k steps Selectable option boards (serial/Etherne/USB)

I/O points: Max.7,936(H-2002) Program Memory: Max. 48.5k steps(H-2002)

(For EH/H series) Ladder/command language programming software

● Windows is a registered trademark of Microsoft Corp. in the U.S. and other countries.

HLW-PCRE (Windows® 2000/XP)

Magnetic starters and contactors H series Electromagnetic contactors

Electromagnetic starters

Electromagnetic starters with enclosure

Contactor relays

Thermal overload relays

HS series Electromagnetic starters

TR80B-1E TR80B-2E XS4

H150C

H65C-T

Non reversible type : 10A to 800A frames Reversible type : 10A to 800A frames

Non-reversible type : 10A to 600A frames Reversible type : 10A to 600A frames

Non-reversible type : 10A to 600A frames Reversible type : 10A to 600A frames

3 contacts to 8 contacts

1E : Overload and lock protections type 2E : Overload, lock and phase-failure protections type

HS20-T Non-reversible type : 10A to 50A frames Reversible type : 20A to 50A frames

Molded case circuit breakers F series (Standard) 30A to 4000A frames

L series (High interrupting capacity) 50A to 800A frames

S series (Economical) 30A to 800A frames

B series (for distribution panel)

M series (Motor breaker) 30A to 225A frames

50A to 100A frames

F-50FC

FXK225-S

FX600

S-30E

SXK225

SX600

L-50E

L-100E

Earth leakage circuit breakers R series (High interrupting capacity)

30A to 800A frames

50A to 1200A frames

EXK225

EX400B

Amorphous Core Transformers Oil-immersed Transformers

Three phases 1,000kVA Single phases 300∼ 500kVA Three phases 300∼3,000kVA Primary voltage 6kV

MS-30E

MS-50SB

Earth leakage relays

E series (Standard)

EB-50E

L-400E

RX100

RXK225-S

RX600B

Molded Transformers

Single phases 50kVA Single phases 50∼ 500kVA Three phases 75∼ 1,000kVA (Primary voltage 6kV)

MS-100SB

B-50E

Air circuit breakers 630A to 5000A frames

Standard five types Small two types

AKS-20D

Molded Transformers

Three phases 300kVA Single phases 10 ∼ 500kVA Three phases 20∼ 3,000kVA (Primary voltage 6kV)

Oil Immersed Transformers

Three phases 3,000kVA Three phases 20 ∼ 5,000kVA (Primary voltage 10 ∼30kV)

Three phases 30kVA Single phases 10 ∼ 500kVA Three phases 20 ∼ 3,000kVA (Primary voltage 6kV)

Single phases 2,000kVA Single phases 750∼ 3,000kVA Three phases 750∼ 3,000kVA (Primary voltage 30kV)

Electric chain hoists Standard

High speed type

S series

F series

250kg to 5t Hook suspension type With motor trolley-ET With motor trolley-ST

1 to 20t Hook suspension type With motor trolley-ET With motor trolley-ST

Rope hoists

V series (with high function) Low headroom type

Standard headroom type

1/2 to 20t ･Suspension type ･Manual driven trolley ･Chain driven trolley ･Motorized trolley

Double-rail type

1/2 to 5t ･Suspension type ･Manual driven trolley ･Chain driven trolley ･Motorized trolley

A series (for practical use) Standard headroom type

1 to 3t ･Suspension type ･Manual driven trolley ･Chain driven trolley ･Motorized trolley

2 to 30t With aligning trolley

Low headroom type

With creep speed for hoisting

1 to 3t ･Suspension type ･Manual driven trolley ･Chain driven trolley ･Motorized trolley

Standard headroom type 1/2 to 20t Low headroom type 1/2 to 5t Double-rail type hoist 2 to 30t

Dedicated purpose hoists

Jib crane kits By adoption with the HRK Rail, easy setup, durable, easy to use, and thus economical.

Explosion-proof hoist

Capacity 1／4 1／2

Standard head room type ･1 to 5t Low headroom type ･1 to 5t Double-rail type ･2 to 5t

Jib length(m) 3.3 5.3 3.3 5.3

Attention. 1. With a cable carrier for manual driven trolley 2. Bolt for setup is not included. Prepare high tension bolts, please. ※ We can produce any hoists on your demand. Please do not hesitate to contact us

Crane saddles

Suspension type Max. wheel load 1.0 to 5.6t

Toprun type Max. wheel load 1.0 to 11.2t

TH5-10/TH5-28/TH5-30/ THL5-30/TH5-56/ THL5-56/TH-112

Model JR3-103 JR3-105 JR3-103 JR3-105

TL5-10/TL5-28

SL5-10/SL6-28/SL5-30/SL5-56

Lubricated Type

Electronic Type Package BEBICON ( 1.5∼7.5kW) M-Type

BEBICON

Package Scroll BEBICON Direct Drive Scroll

Package BEBICON

Pressure-Switch Type Power Range : 0.75 ∼11kW Maximum Pressure : 0.93MPa Capacity : 80 ∼1,200L/min Automatic-Unloader Type Power Range : 0.75 ∼15kW Maximum Pressure : 0.93MPa Capacity : 80 ∼1,650L/min Max.Press.of 1.37MPa type is available.

(with or without air dryer) Pressure-Switch Type Power Range : 3.7∼ 6.6kW Maximum Pressure : 0.83MPa Capacity : 440∼ 720L/min Specifications depend on power supply frequency.

(with or without air dryer) Electronic Type Power Range : 1.5∼ 11kW Maximum Pressure : 0.93MPa Capacity : 165∼ 1,200L/min Max. Press. of 1.37MPa type is available.

(with or without air dryer) Pressure-Switch Type Power Range : 0.75kW Maximum Pressure : 0.93MPa Capacity : 80L/min

Oil Less Type

Super Oil Free BEBICON LE-series

LH-series

LE-series Pressure-Switch Type Power Range : 0.2∼ 0.9kW Maximum Pressure : 0.6∼ 0.8MPa Capacity : 20∼ 100L/min

LH-series Air End Power Range : 100∼480W Maximum Pressure : 0.2∼ 0.39MPa Capacity : 20∼95L/min

Air Punch series

Air Punch V-series Pressure-Switch Type Power : 750W, 1,250W Maximum Pressure : ※1 2.7,4.2MPa ※1 Capacity : 70,145L/min(at 0.7MPa) 45,95,102L/min(at 2.3MPa) Discharge press.from the standard out let is less than 1.1 MPa and discharge press. from the high press. out let is less than 2.5 MPa.

Oil Free BEBICON GREEN series

Pressure-Switch Type Automatic-Unloader Type Power Range : 0.75∼11kW Maximum Pressure : 0.85∼0.93MPa Capacity : 75∼1,355L/min

Medium Press Oil Free BEBICON(1.37 MPa)

Pressure-Switch Type Power Range : 3.7, 7.5kW Maximum Pressure : 1.37MPa Capacity : 360, 730L/min

Oil Free Scroll

Air Punch H-series Pressure-Switch Type Power : 1,000W Maximum Pressure : ※ 2 2.16MPa Capacity : 95L/min(at 0.69MPa)

Package Oil Free BEBICON LE-series

(with or without air dryer) Pressure-Switch Type Power Range : 0.45/0.75kW Maximum Pressure : 0.8∼0.93MPa Capacity : 33∼100L/min

Electronic Type Package Oil Free BEBICON ( M-type

1.5∼7.5kW )

(with or without air dryer) Electronic Type Power Range : 1.5∼ 15kW Maximum Pressure : 0.85∼ 0.93MPa Capacity : 165∼ 1,700L/min

Electronic Type Package Oil Free BEBICON ( V-type

5.5∼7.5kW )

(with air dryer) Inverter Type Power Range: 5.5∼ 15kW Discharge Pressure: 0.58 ∼ 0.93MPa Capacity: 625∼ 1,750L/min

NOTE : The output of compressed air is the amount of air discharged under the maximum pressure converted in terms of air suction (under the atmospheric pressure).

Booster BEBICON

Air Dryer

Nitrogen Gas Generator N2 Pack MX・TX-series (PSA Type)

(with or without air dryer) Pressure-Switch Type Power Range : 0.75 ∼16.5kW Maximum Pressure : 0.8 ∼1.0MPa Capacity : 80 ∼600L/min （Low Pressure 1,500 Large Capacity Type） Pressure-Switch Type Power Range : 1.5∼15kW Maximum Pressure : 0.3MPa Capacity : 252∼ 2,400L/min

Oil Free Power Range : 0.4∼11kW Suction Press : 0∼0.6MPa (0.2∼0.6MPa : silent type) Maximum Press : 1.0MPa (1.37MPa : 7.5HB) Capacity : 200∼4,250L/min Lubricated Power Range : 3.7∼7.5kW Suction Press : 0∼0.49MPa Maximum Press : 0.93MPa Capacity : 1,280∼2,650L/min

Refrigerator Rated Output : 200∼ 500W Maximum Pressure Dew Point : 10℃ Capacity : 280∼ 1,850L/min NOTE : In case of purchasing these products, please preexamine regulations of the country where these products are installed.

Power Range : 0.75/2.2/3.7/5.5/7.5kW, 11/15kW Nitrogen Purity : 99/99.9%/99.99% Discharge Pressure : 0.50∼ 0.78MPa Capacity : 0.9∼ 42m3/h NOTE : The capacity is taken at the ambient temperature of 20 degree C and ambient humidity of 60% and without clogs on the suction filter. This capacity is converted in terms of air suction conditions (under the atmospheric pressure).

Oil-flooded Type Variable Speed Control Type

（7.5∼75kW） 2000 series（100kW）

Variable speed Control Output : 7.5 ∼100kW Discharge Pressure : 0.45 ∼0.9MPa Air Capacity : 0.96 ∼ 19.0m3/min ※7.5∼ 100kW are equipped with new function P(Pressure)-Q(Capacity)wide mode

Electronic Control Output : 7.5∼ 75kW Discharge Pressure : 0.7∼ 0.85MPa Air Capacity : 1.03∼ 13.0m3/min

High Grade Option

High-end model （VSD and Fixed Speed） Output : 22 ∼75kW Discharge Pressure : 0.45 ∼0.85MPa Air Capacity : 3.5 ∼13.9m3/min

Oil Free Type (DSP (DSP)

（7.5∼75kW） 2000 series（100,110kW）

Dryer built-in Type

)

Electronic Control Output : 7.5∼ 110kW Discharge Pressure : 0.7∼ 0.85MPa Air Capacity : 1.03∼ 20.0m3/min

2000 series Dual Control V-type, M-type

2-stage

Output : 150kW Discharge Pressure : 0.75∼ 0.85MPa Air Capacity : 24.1∼ 26.0m3/min

Electronic control Output : 125∼ 240kW Discharge Pressure : 0.69∼ 0.83MPa Air Capacity : 20.5∼ 45.0m3/min Water Cooled Only

Oil Free Screw (single-stage)

Oil Free Screw (2-stage)

Oil Free Screw (Dryer built-in Type)

2-step control Output : 15∼55kW Discharge Pressure : 0.69MPa, 0.39MPa Air Capacity : 2.0∼ 8.0m3/min

2-step control Output : 22∼ 120kW Discharge Pressure : 0.69∼ 0.93MPa Air Capacity : 3.6∼ 21m3/min

2-step control Output : 15∼ 75kW Discharge Pressure : 0.69 ∼0.93MPa Air Capacity : 2.0∼ 13.2m3/min

Variable Speed Control

Variable Speed Control Output : 22, 37, 55, 75, 100, 160, 240kW Discharge Pressure : 0.39 ∼0.93MPa Air Capacity : 3.4 ∼ 40.5m3/min ※22∼75kW are equipped with new function P(Pressure)-Q(Capacity) wide mode

Oil Free Type (DSP)

Oil Free Type (SDS)

Oil Free Screw (2-stage)

2-step control, Output : 132∼240kW Discharge Pressure : 0.75∼1.0MPa Air Capacity : 19.0∼40.5m3/min

Oil Free Screw (SDS-U series)

2-step control, water-cooled Output : 105∼460kW Discharge Pressure : 0.69∼0.93MPa Air Capacity : 15.0∼81.1m3/min NOTE : In case of purchasing these products, please preexamine regulation of the country where these products are installed.

Auxilialy Parts

Multiple control panel

Line Filter

Air Dryer(HDR-AXⅠseries 7.5∼37) (HDR-AX series 55∼380) Air Filter ● Remove micron-size dirt particle

Chiller Output : 250∼6,000W Dew point : 10℃ Air Capacity : 1.1∼69m3/min

Micro Mist Filter ● Outlet Oil Concentrations 0.01wtppm Deodorant Filter ● Outlet Oil Concentrations 0.003wtppm

● Saving Energy ● Normalize the running hours

Land pump series

JOVD type end suction centrifugal pump

JD type mono-block pump

JL type in-line pump

For water supply in buildings and factories φ40∼φ100, 0.25kW∼11kW

For circulating hot water φ25∼φ80, 0.25kW∼11kW

For water supply in buildings and factories φ40∼φ100, 1.5kW∼ 15kW

HOV type end suction centrifugal pump

DV type both-side suction centrifugal pump

For air conditioning(Especially high forced pressure application) φ65∼φ250, 0.75kW∼ 160kW

Stainless pump series

For waterworks and factories φ200∼φ350, 11kW∼250kW

Clean water submersible pump series

JUP type stainless submersible centrifugal pump Rustless pump for water suppy to buildings φ40,φ50, 1.5kW∼7.5kW

JDP type stainless monoblock pump

JLP type stainless inline pump

NJP type stainless multistage centrifugal pump

JU type submersible centrifugal pump

Rustless pump for water supply to buildings and for setup of general industrial equipment φ32∼φ50, 0.75kW∼3.7kW

Rustless pump for circulating cool and hot water φ32∼φ50, 0.25kW∼1.5kW

Rustless pump for water supply to buildings φ40∼φ80, 1.5kW∼ 11kW

For water supply in buildings and factories φ40∼φ100, 0.4kW∼45kW

Sewage pump series

Fire extinguishing pump unit USE type submersible waste water drain pump

UNP type submersible sanitary sewage pump

For draining waste water from small building φ40∼φ100, 0.25kW∼ 3.7kW

For draining sanitary sewage from purification tanks, water from agricultural, gardening and nursery pools or from water tanks φ40 ∼φ80, 0.25kW∼ 3.7kW

US type fire extinguishing pump unit

UBE type submersible sanitary sewage pump

For indoor fire hydrant facilities (US-HA) For sprinkler facilities (US-HT) φ40∼φ200, 1.5kW∼132kW

For draining sanitary sewage φ40∼φ100, 0.25kW∼ 3.7kW

Automatic Water Supply Units (Water Ace ®)

Inverter Water Ace

Neuro Junior Water Ace

Direct Water Ace

for water supply in buildings and apartment house φ40∼φ125, 0.75kW∼11kW

for water supply in buildings and apartment house φ40∼φ65, 0.75kW∼ 5.5kW

(Water service main directly conecting type) for water supply in apartment house φ25∼φ65, 0.75kW∼ 7.5kW

Vortex blower High air pressure compact type(G series)

VB-70WS-G∼VB-022-G 100V, single-phase, 50/60Hz 200V, three-phase, 50/60Hz 400V, three-phase, 50/60Hz Maximum air capacity : 0.45/0.5∼4.5/5.5(m3/min) Maximum static pressure : 4.0/5.4∼19.6/23.5(kPa)

PXR Series Air capacity type (E, E2 series)

VB-001S-E∼VB-110-E2 100V, single-phase, 50/60Hz 200V, three-phase, 50/60Hz 400V, three-phase, 50/60Hz Maximum air capacity : 0.65/0.75∼16/18.5(m3/min) Maximum static pressure : 4.6/6.2∼25.5/29.4(kPa)

RX Series

PH Series

DN series

VB-004DN∼VB-020DN 100V, single-phase, 50/60Hz 200V, three-phase, 50/60Hz 400V, three-phase, 50/60Hz Maximum air capacity: 1.4/1.8∼ 3.5/4.2 (m3/min) Maximum static pressure: 11.1/12.7∼18.0/20.0 (kPa)

10.4 inch liquid crystal touch panel (color)

WYSIWYG 10.4 inch color LCD touch panel

8.9 inch monochrome LCD touch panel

Cabinet:Stainless Steel IP55

Cabinet: Stainless Steel

Cabinet: Stainless Steel

Size:400 x 290 x 515mm

Size:400 x 320 x 480mm

Size:400 x 290 x 515mm

Approximate weight:25kg

Approximate weight:25kg

Approximate weight:25kg

AC 100-120/220-240V±10% 50/60Hz 150VA

AC 100-120/220-240V±10% 50/60Hz 150VA

AC 100-120/220-240V±10% 50/60Hz 150VA

Character size / Machine type Small size character Middle size character Hight speed White pigment

Model

Print lines

PXR-D240W PXR-D440W

UP to 2 UP to 4

PXR-D410W

UP to 4

PXR-H450W PXR-P460W

UP to 4 UP to 4

Products in this catalogue are not available in some regions. Ask each sales office for the detail.

Character size/ Machine type Small size character

Model

Print lines

PH-D260W PH-D460W

UP to 2 UP to 4

NETWORK Hitachi Industrial Equipment Systems Co., Ltd. meets customers’ needs through the total network which can supply speedy design, production, sales, service and engineering for industrial equipment and systems.

Global Sales Network

Asia & Oceania Australia

Indonesia

Hitachi Australia pty Ltd. Suite 801, Level 8, 123 Epping Road, North Ryde, NSW, 2113 TEL : +61 (2) 9888-4100 FAX : +61 (2) 9888-4188

China

North America U.S.A. Hitachi America, Ltd. Industrial Components and Equipment Division 50 Prospect Avenue Tarrytown, NY 10591 TEL : +1 (914) 631-0600 FAX : +1 (914) 631-3672 Charlotte Office Industrial Components and Equipment Division 6901 Northpark Blvd., Suite A Charlotte, NC 28216 TEL : +1 (704) 494-3008 FAX : +1 (704) 599-4108 Brisbane Office Industrial Components and Equipment Division 1000 Marina Boulevard Brisbane, CA 94005 TEL : +1 (650) 589-8300 FAX : +1 (650) 244-7600

Latin America Hitachi Brasil Ltda Av Paulista, 854, 11 andar, conj 111 Bela Vista - Sao Paulo-SP CEP: 01310-913 (Edificio Top Center) TEL : +55 (11) 3284-0922 FAX : +55 (11) 3284-0922 Hitachi Argentina S.A. Carlos Pellegrini 1363 Piso 1 (C1011AAA) Buenos Aires 01310-913- Sao Paulo- S.P. TEL : +54 (11) 4394-5452 FAX : +54 (11) 4394-5416

Mexico Hitachi Mexico, S.A. de C.V. Andres Bello No.10 Piso 10 Col. Chapultepec Polanco 11560, Mexico, D.F. TEL : +52 (55) 5282-9040 FAX : +52 (55) 5282-9042

Europe Germany Hitachi Europe GmbH (Industrial Components & Equipment Group) Am Seestern 18 (Euro Center) D-40547 Düsseldorf TEL : +49 (211) 5283 0 FAX : +49 (211) 5283 649

Russian Federation Hitachi, Ltd. (Moscow Office) Millenium House, 12, Trubnaya, Moscow 103045 TEL : +7 (095) 787-4022／4020 FAX : +7 (095) 787-4021

U.K. Hitachi Europe Ltd. Whitebrook Park, Lower Cookham Road Maidenhead, Berkshire SL6 8YA TEL : +44 (1628) 585000 FAX : +44 (1628) 778322

Near & Middle East Egypt Hitachi, Ltd. (Egypt Office) Cairo Center Building (14th floor) 2, Abdul Kader Hamza Street, 106 Kasr El Aini Street, Garden City Cairo, Egypt TEL : +20 (2) 2795-4972 FAX : +20 (2) 2795-4973

U.A.E. Hitachi, Ltd. (Middle East Branch) Office No. 1205 Al Masraf Tower Baniyas Road, Deira P.O. Box 5561, Dubai, U.A.E TEL : +971 (4) 228-3617, 221-4824 FAX : +971 (4) 221-1783

Hitachi (Shanghai) Trading Co., Ltd. Hitachi(China)Ltd.(Shanghai Office) (Industrial Equipment Systems Division) 12th Floor, Rui Jin Building No. 205, Maoming Road (S) Shanghai, 200020 TEL : +86 (21) 6472-1002 FAX : +86 (21) 6472-4990 Hitachi (China) Ltd. (Beijing Office) 18th Floor Beijing Fortune Building 5 Dong San Huan Bei Lu Chao Yang District, Beijing 100004 TEL : +86 (10) 6590-8111 FAX : +86 (10) 6590-8110 (Guangzhou Office) 3406, Office Tower, CITIC Plaza 233 TianHe North Road, Guangzhou 510613 TEL : +86 (20) 3891-2737 FAX : +86 (20) 8752-1301 Taiwan Hitachi Asia Pacific Co., Ltd 3rd Floor, Hung Kuo Building No. 167 Tun-Hwa North Road, Taipei (105) Taiwan TEL : +886 (2) 2718-3666 FAX : +886 (2) 2514-7664 Hitachi East Asia Ltd.(Hong Kong Office) 6th Floor, "North Tower, World Finance" Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon Hong Kong. TEL : +852 2735-9218 FAX : +852 2735-6793 Hitachi (China) Ltd. (Qingdao Office) Room 910,Qingdao Crowne Plaza Hotel, No.76 Xiang Gang Zhong Road, Qingdao City Shandong,266071,China TEL : +86 (532) 8576-3527 FAX : +86 (532) 8577-7510

Hitachi Asia Ltd. (Jakarta Office) Menara BCA 38th Floor, JI.M.H.Thamrin No.1 Jakarta 10310 TEL : +62 (21) 2358-6757 FAX : +62 (21) 2358-6755

Korea Hitachi Korea Ltd. (Headquarter) 7th Floor, The Korea Chamber of Commerce & Industry 45, Namdaemunro 4ga, Jung-gu, Seoul, 100-743 TEL : +82 (2) 3210-3590 FAX : +82 (2) 6050-8519

Malaysia Hitachi Asia (Malaysia) Sdn. Bhd. Suite 17.3, Level 17, Menara IMC (Letter Box No.5) No. 8 Jalan Sultan Ismail, 50250, Kuala Lumpur TEL : +60 (3) 2031-8751 FAX : +60 (3) 2031-8758

Philippines Hitachi Asia Ltd. (Philippines Office) 17th Floor Oledan Square 6788 Ayala Avenue, Makati City, Philippines 1226 TEL : +63 (2) 886-9018 FAX : +63 (2) 887-3794

Singapore Hitachi Asia Ltd. (Industrial Components & Equipment Division) 24 Jurong Port Road #03-05 CWT Distripark Office Block Singapore 619097 TEL : +65-6305-7400 FAX : +65-6305-7401

Thailand Hitachi Asia (Thailand) Co., Ltd. 18th Floor, Ramaland Building, No.952 Rama IV Road Bangrak, Bangkok 10500,Thailand TEL : +66 (2) 632-9292 FAX : +66 (2) 632-9299

Viet Nam

India Hitachi India Pvt. Ltd. Units 304-306, 3rd Floor, ABW Elegance Tower, Jasola District Centre, New Delhi 110 025, India TEL : +91 (11) 4060-5252 FAX : +91 (11) 4060-5253 (Bangalore Office) Unit 103, 1st Floor, Shah Sultan Complex, No17, Cunningham Road, Bangalore 560 052, India TEL : +91 (80) 2238-6986/987/984 FAX : +91 (80) 2238-6988 (Mumbai Office) 302, Ascot Centre, Next to Hotel Le Royal Meridien, Sahar Road, Andheri (East) ,Mumbai 400 099, India TEL : +91 (22) 2821-5625/5892 FAX : +91 (22) 2821-2610 (Chennai Office) 206, Apeejay House, No.12 Haddows Road, Nungambakkam, Chennai 600 006, India TEL : +91 (44) 2821-3108/3109 FAX : +91 (44) 2821-3110

Hitachi Asia Ltd. (Ho Chi Minh City Office) 4th Floor, The Landmark, 5B Ton Duc Thang Street District 1, Ho Chi Minh City TEL : +84 (8) 829-9725 FAX : +84 (8) 829-9729 (Ha Noi Office) Sun Red River Bldg., 5th Floor, 23 Phan Chu Trinh Street Hoan Kiem District Hanoi TEL : +84 (4) 933-3123 FAX : +84 (4) 933-3125

Manufacturing Plants

Affiliated Companies

Hitachi laboratories affiliated with our company

NARASHINO Division NAKAJO Division Air Compressor System Division (Shimizu area) Marking Systems and Hoist Systems Division (Taga area) Hitachi Ltd. KOKUBU Engineering Hitachi Appliance Inc. Hitachi Plant Technology, Ltd. Hitachi TAGA Technology, Ltd. Hitachi Industrial Technology (Thailand) , Ltd. Hitachi Industrial Equipment (Nanjing) Co., Ltd. HITACHI INDUSTRIAL EQUIPMENT (MALAYSIA) SDN.BHD. Hitachi Qiandian (Hangzhou) Transformer Co., Ltd.

Hitachi KE Systems, Ltd. Shuwa Industry Corp. Nakajo Engineering Co., Ltd. Industrial Equipment Techno Service, Ltd. Hitachi Industrial Technology (Thailand) , Ltd. Hitachi Industrial Equipment (Nanjing) Co., Ltd. HITACHI INDUSTRIAL EQUIPMENT (MALAYSIA) SDN.BHD. Hitachi Qiandian (Hangzhou) Transformer Co., Ltd.

Hitachi, Ltd. Technology Strategy Office Hitachi, Ltd. Central Research Laboratory Hitachi, Ltd. Hitachi Research Laboratory Hitachi, Ltd. Yokohama Research Laboratory Hitachi, Ltd. Design Division Hitachi, Ltd. Overseas Research centers

The business facilites and other establishments of Hitachi Equipoment Systems Co., Ltd. are certified under ISO 14001 (the international standard for environmental management systems). JQA-EM0449

Principal office AKS Bldg., 3, Kanda Neribei-cho, Chiyoda-ku, Tokyo, 101-0022 Japan International Sales Dept. Hitachi Industrial Equipment Systems Co.,Ltd. TEL: +81(3)4345-6063 FAX: +81(3)4345-6914

http://www.hitachi-ies.co.jp/english/

JACO-EC97J1095 JQA-EM5428 JACO-EC97J1107 JACO-EC99J1053 EC97J1095

JACO-EC99J1177 JACO-EC99J2009

Head Office, Branches, Service Division Narashino Division Nakajo Division Air Compressor System Division (Shimizu area) Air Compressor System Division (Ebina area) Air Compressor System Division (Sagami area) Marking Systems and Hoist Systems Division (Taga area)

In terms of quality, the company is certified under ISO 9001 (the international for quality management system) and works to provide high quality in goods and service.

Z 2012.9