SLURRY PUMPS CORNELL PUMP COMPANY
EFFICIENT BY DESIGN
SP SERIES SLURRY PUMPS CORNELL’S NEW SLURRY PUMPS EXPAND OUR LINE OF DEWATERING PUMPING SOLUTIONS TO ABRASIVE APPLICATIONS IN THE MINING PROCESS INDUSTRY. WITH CORNELL’S PATENTED CYCLOSEAL® TECHNOLOGY, OUR SLURRY PUMPS ARE BUILT TO OPERATE WITHOUT FLUSH WATER.
LONGER PUMP LIFE AND BETTER SEALS MECHANISM SAVES TIME AND MONEY IN MAINTENANCE AND REPLACEMENT.
WEIGHT (LB)
WEIGHT (LB) MODEL FRAME METAL RUBB. FLANGE DIMENSION
FLANGE DIMENSION SUCTION
DISCHARGE
NOTES: 1. Do not use for construction unless certified. 2. Dimension "U" and Keyway are in millimeters. All other dimensions in inches. use3. for construction unless certified. Flange dimensions are non-standard.
MODEL
DF
2SP
7.25
MODEL 9.02
3SP
NOTES: 1. Do not 2. Dimension "U" and Keyway are in millimeters. All other dimensions in inches. 3. Flange dimensions are non-standard.
10.98 2SP
4SP 6SP
5.75
DF
12.76
17.01
14.76
10SP
4SP 20.75
12SP
21.73 6SP
8SP
4x.75
7.52 4x.88 9.25 7.254x.88
14.49
3SP
8SP
DH SF SJ DISCHARGE
DJ
8x.81
MODEL 2SP
FRAME DISCH. SUCT. C 2 3
C
420
340
3SP
C
580
520
SJ 4SP
E
3SP
D
800
640
4SP
D
1380
1000
SF
4x.88 8.5
8x.88
4SP
6SP 7
D
SH
1380
1000
1600
1400 2165
6SP
E 4x.753250 4050 R
8SP
ST
8270
6900
9.25
2965
4x.88
4SP
E
1600
1400
7400
6SP
E
3250
2165
10300
6SP
R
4050
2965
8x1.13
8SP
ST
8270
6900
18.5
8x1.0
10SP
ST
10185
7400
20.51
12x1.0
12SP
ST
14130
10300
X
4.76x 18mm8.27 32mm
Y 5.98
Z 5.43
32mm 4.76x 18mm10.31
7.4
5.87
17.52
4x.88 10.98 8x1.13 4x.88 13.27 18.5 8x1.0
11.5 10SP
19.49 23.03 14.4912x1.012.76
20.51 8x.81 12x1.0 15.98
12SP 14.02
ST 8x.8814130
14.76
8x1.13
19.76
17.52
18.5
12x1.0
20.75
19.49
12x1.0
23.03
17.01 21.73
D 10
E 7
F 6.89
G 1.89
H 0.75
L 9.17
P 1.26
R 11.06
U 42mm
33.19
10
7
6.89
1.89
0.75
10.63
11.5
1.26
13.94
42mm
3SP
D
3
4
19.37
14.33
37.13
13
8.5
8.39
2.52
0.87
10.98
11.5
1.5
65mm
6.46
10.31
7.4
5.87
18mm x 11mm
D
4
6
19.37
14.33
40.2
13
8.5
8.39
2.52
PUMP12.52 DIMENSIONS 0.87 15.98 1.5
13.9
4SP
16.57
65mm
6.46
13.31
8.5
9.02
18mm x 11mm
6
24.49
17.64
46.38
17.99
10.75
10.12
2.99
1.14
13.82
15.98
2.13
17.05
80mm
8.74
13.31
8.5
9.02
22mm x 14mm
6SP
E
6
A 8 15.98 10
8
24.49
B CP 26.77 23.23 53.54 12.2430.71 30.24 45.28 68.82
17.64
51.26
17.99
10.75
E 19.29 7 24.41
10.12
2.99
1.14
15.83
21.69
2.13
21.93
80mm
8.74
18.11
11.5
12.52
22mm x 14mm
12 15.98
45.28 71.5 12.2430.71 33.19
D
12SP
4
ST ST
4 4 6
10 12
14
19.37 19.37
45.28
30.71
73.74
14.33
37.13
14.33
40.2
D 13.78 10 25.59 25.59 10
11.02 17.72
Z 5.43
KEYWAY 12mm x 8mm
7.4
5.87
12mm x 8mm
O P 21.81 85mm 8.5 27.249.37 120mm 1.26 11.02
3.15 10.63
2.52
0.87
12.52
15.98
1.5
16.57
10.12
SP-SERIES HORIZONTAL 2.99 1.14 SLURRY 13.82PUMP 15.98 2.13 FRAME 17.05
10.12
2.99
1.14
15.83
21.69
2.13
21.93
-
12.28
21.69
25.59 • 17.72 24.41 Tailings and4.92 mine 1.89 refuse17.28
26.5
24.41
8.39
8.5
8.39
10.75 10.75
13
13.78 • 11.02 Mill
23.23
53.54
30.71
68.82
30.71
71.5
25.59
30.71
73.74
25.59
4.92
8.5
17.72
1.89
19.13
19.29 2.76 discharge 24.41
4.92
37.17
1.89
• Mining and mineral 17.72 24.41 4.92 1.89 processing
CORNELL PUMP COMPANY
3.15
30
120mm 1.26 11.02 11.5
R U 18.11 11.5 12.52 11.0613.1142mm 25 16.5
10.98
CORNELL E 4 6 24.49 PUMP 17.64 COMPANY 46.38 17.99 APPLICATIONS E 6 8 24.49 17.64 51.26 17.99 6 8 26.77 Dewatering 8 10 Cyclone feed 45.28 ST 10 12 45.28 • Regrind ST 12 14 45.28 • Flotation
Y 5.98
29.72 0.75
17.72 17.72
1.89 1.8918.13
L 1.98 9.17 3.15
X 8.27
10.31
0.87
13
4.92 6.89
G H 12.28 21.69 1.8917.28 0.75 1.89 26.5
V 4.76
4.76
2.52
25.59
7 24.41
F 2.76 6.89 4.92
O 9.37
4x.8810185 ST
CP 30.24
4SP
12SP
2SP
640
12.24
3
10SP
520
800
B 12.24
10SP 3
R•
580
D
15.98
FRAME DISCH. SUCT. 6SP R 6 C 8SP 2 ST 3 8
ST•
C
A 15.98
D
8SP
14.02
3SP 3SP SUCTION
4
C
6SP
11.5 4x.75
MODEL FRAME METAL RUBB.
3
3SP
6SP
4x.88
340
C
3SP
4SP
15.98
4x.75
DH
420
3SP
4SP E 4 CONNECTION
MODEL 2SP
12SP
13.27 5.75
7
9.25
C
9.02 7.52 8x1.13 19.76 10.9812x1.0 9.25 18.5 20.75
PUMP DIMENSIONS 10SP 20.75 CONNECTION
8.5
DJ 10.98
SH
2SP
31.97
120mm
11.5
18.13
29.72
19.13
37.17
11.02
1.5
26.54 13.94 15
18.27 42mm
13.9
65mm
32.76
15.98
24.76
32mm x 18mm
6.46
10.31 3/29/13
7.4
5.87 9.02
6.46
13.31
80mm
8.74DIM2212 13.31
8.5 8.5
9.02
80mm
8.74
18.11
11.5
12.52
21.81duty 85mm 8.5 slurries 18.11 11.5 • 1.98Heavy abrasive 3.15 27.24 120mm 11.02 25 13.11 • Medium duty abrasive slurries 30 120mm 11.02 15 • 3.15In-plant slurry transfer26.54 pumps
12.52
3.15
31.97
65mm
V
22mm x 14mm
120mm
11.02
32.76
SP-SERIES SLURRY PUMP HORIZONTAL FRAME
15.98
16.5 18.27 24.76
SP SERIES SLURRY PUMPS CYCLOSEAL®: THE INNOVATION THAT DISTINGUISHES THE SP SERIES AS CORNELL TOUGH Cornell’s Cycloseal® design, with its unique deflector vanes, works with the expeller to create a cyclo-action. This action removes solids and abrasive material from the seal area while purging air and gas pockets – extending seal life and eliminating any need for venting or water flush.
CYCLOSEAL® BRINGS LONGER SEAL LIFE, DRASTICALLY REDUCES SPRAY-OVER IN OPERATION, AND DECREASES OFF-LINING PUMPS FOR MAINTENANCE CYCLOSEAL® BENEFITS: Extended Seal Life: Cornell’s Cycloseal® design has proven itself in the toughest applications from manure slurry to starch recovery to clear water, food processing, self-priming and hot cooking oil applications — in some cases more than tripling the normally expected mechanical seal life. Run-Dry™ Option: All pumps equipped with Cornell’s Cycloseal® system have an optional run-dry feature available, which serves to lubricate the seal faces even when there is no liquid in the pump casing. In situations where the pump must run dry for several hours, or where the pump may suddenly lose prime without being shut off, the RunDry™ feature is a must. System Savings: The Cycloseal® system requires no external water flush, filters, grease cups, piping or instrumentation normally associated with packing or double mechanical seals. Maintenance Savings: Longer seal life which translates into less pump down time and lower maintenance costs.
SP SERIES SLURRY PUMPS The SP series is designed to transport heavy abrasive slurry with high concentration of solids, at pH levels 1 to 13 (rubber lined) and 3 to 14 (metal). Pumps available in chrome iron and rubber lining configurations. SP series pumps are designed to handle abrasive high density slurries in mining, metallurgical, coal, manure, and other industrial applications.
BENEFITS • • • • • •
Solids handling up to 3.5” Heads up to 235’ at BEP No Flush Water Required Industry leading two year warranty Superior abrasive and corrosive wear life Handles pH levels 1 to 13 (rubber lined) and 3 to 14 (metal) • Available in rubber lined or chrome-iron configuration
FEATURES • Specific lining allows for various material handling • Large solids handling • Robust design allows it to be applied in difficult operating environments • Seal lasts up to three times longer than other mechanical seals • Patented Cycloseal® and Run-Dry™ options
SPECIFICATIONS • • • • • • • • • • •
Housing Material: Ductile iron Liner Material: Chrome iron or rubber Impeller Material: Chrome iron or rubber Backplate: Chrome iron Bearing Housing & Pedestal: Cast iron Discharge Size: 2” to 12” Flow rate: Up to 14,000 GPM Seal Type: Cycloseal or gland packing Solids Diameter: Up to 3.5” Impeller Type: Enclosed Head: Up to 235’ at BEP
90
FEET
METERS
SP SERIES SLURRY PUMPS 300 275 80 250 70
10SPM
225 3SPM 200
50
40
TOTAL DYNAMIC HEAD
60
4SPM
6SPM
2SPM
175
12SPM
8SPM
MODEL 2SPM 3SPM
150
4SPM 6SPM 8SPM
125
10SPM 12SPM
100
30
75 20 50 10
25
0
0
FEET
8000
METERS
40000
30000 6000
5000
4000
07/10/14 CTG
20000
07/10/14 CTG
A
3000
A
2000
1000
800
600
Clackamas, Oregon
500
400
300
200
•
100
70
80
60
50
40
30
Cornell Pump Company
10000
8000
6000
5000
4000
3000
2000
1000
800
600
500
400
300
200
100
CAPACITY
GPM
M3/HR
FAMILY MAP - SPM SERIES
240 220 200
60
180 50
30
TOTAL DYNAMIC HEAD
40
160 6SPR MODEL
140
2SPR 3SPR
10SPR
120
4SPR
2SPR
3SPR
6SPR
12SPR
8SPR
100
8SPR 10SPR
4SPR
12SPR
80 20
10
60 40 20
0
0 40000
30000
20000
8000
6000
5000
4000
3000
07/14/14 CTG
2000
07/14/14 CTG
A
10000
A
8000
1000
800
600
500
Clackamas, Oregon
400
300
200
•
100
80
60
50
40
30
Cornell Pump Company
6000
5000
4000
3000
2000
1000
800
600
500
400
300
200
100
CAPACITY
GPM
M3/HR
FAMILY MAP - SPR SERIES
OPTIONS & OTHER PRODUCTS MX SERIES HIGH PRESSURE PUMPS Pressures to 800’ TDH and flows to 8,000 GPM. Designed to handle high head applications while providing a long service life. The high head MX SERIES pumps have multi-vane, enclosed impellers designed for INDUSTRY LEADING EFFICIENCY. The MX SERIES pumps have extra heavy wall thickness, high quality construction, CA6NM impellers and are available in a horizontal frame & SAE mounted configurations. • • • • • • •
Discharge sizes: 2”, 3”, 4”, 6” and 8” available 600’ - 800’ TDH flows to 8000 GPM CA6NM impellers Ductile Iron case Cornell Pump quality Industry leading efficiency Two-year warranty
MP SERIES MINING PUMPS DESIGNED FOR COARSE ABRASIVES An adjunct to SP series, The MP series offers high operating pressures, the MP pumps are specifically designed for coarse abrasive slurry applications such as sand, gravel, coal, manure, and mine dewatering. • • • • • • • • •
Discharge Sizes: 4”, 6”, and 8” Flow Rates: Up to 9,000 GPM Heads: Up to 550’ Solids Diameter: Up to 3” Seal Type: Cycloseal® Impeller type: Enclosed Available in horizontal frame and SAE mount configurations Heavy duty construction for aggressive applications. Hardness rating > 650BHN provides better wear properties compared to standard cast or ductile iron.
MINE DEWATERING Specializing in high head dewatering pumps, Cornell has delivered dependable, reliable, and efficient pumps for decades. Our new innovative CD4 Duplex metal volutes, shafts, and impellers increase our solids handling capability. Our self-priming pumps coupled with our impressive suction of 28’ and head of up to 800’ make our pumps ideally suited to dewater the toughest mining applications. Our products are used successfully in long wall, traditional pier and beam, pit, and strip mining applications.
OPTIONS & OTHER PRODUCTS WATER TRANSFER HYDRAULIC FRACTURING Setting the standard for hydraulic fracturing, Cornell’s pumps are designed and engineered for the most rugged and demanding installations. From the Antrim to Woodford Shales, Cornell pumps have exceeded operating expectations, and provided hydraulic fracturing companies unprecedented uptime, reliability, and efficiency. • • • • • • •
Heads up to 800’ Valve eliminates any liquid carry-over Hardened Iron extends life of pump Fully automated priming and self-priming, dry-run pumps Handles Air/liquid mixtures with ease High suction lift capabilities up to 28’ Up to 7,000 GPM flow
HYDRAULIC SUBMERSIBLE PUMPS Cornell’s DuraSubTM uses a heavy duty pump end and bearing frame for direct coupling to a hydraulic motor. The DuraSubTM has a modular design which allows standard Cornell pump ends to be used as a Hydraulic submersible pump. • Available for most Cornell pump models • Hydraulic motor driven • Various adapter plates available for hydraulic motor fit • Heavy duty shaft / bearing frame assembly and wet end construction • Premium wet end efficiencies reduce horsepower requirements • Heavy duty pump ends for long service life and reliability
CLEAR LIQUID PUMPS Cornell Clear Liquid pumps are used for commercial and residential irrigation, golf course and lawn maintenance, aqua culture, fountains, breweries, laundries, cooling towers, fire fighting, reverse osmosis feed, and water boosters. The W, Y, R and H series pumps are available in a wide range of materials with discharge sizes ranging from 1” to 10”, heads to 450’ TDH, and flow rates up to 7,000 GPM.
REDI-PRIME® Cornell Redi-Prime® pumps are designed with oversized suctions to provide more flow, reduced friction losses, and higher suction lift. The priming system was designed with the environment in mind. By using a positive sealing float box and a diaphragm vacuum pump, there is no water carry-over to contaminate the environment. With suction lifts of up to 28’, heads to 800’ and flow rates exceeding 38,000 GPM, most Cornell pumps can be readily fitted with the Redi-Prime® system.
MARKET AND PRODUCT LINE CORNELL PUMP COMPANY
AGRICULTURE
CORNELL PUMP COMPANY
CORNELL PUMP COMPANY
INDUSTRIAL
CORNELL PUMP COMPANY
FOOD PROCESS
MINING
CORNELL PUMP COMPANY
MUNICIPALITIES
CORNELL PUMP COMPANY
REFRIGERATION
OIL & GAS
CORNELL PUMP COMPANY
CYCLOSEAL
CORNELL PUMP COMPANY
®
PATENTED LONG LASTING, LEAK-FREE FLUSHLESS SEALING SYSTEM
20
Celebrating
YEARS
EFFICIENT BY DESIGN
AGRICULTURAL
CORNELL PUMP COMPANY
CHOPPER
EFFICIENT BY DESIGN
EFFICIENT BY DESIGN
FOOD PROCESS
EFFICIENT BY DESIGN
INDUSTRIAL
MINE DEWATERING
END GUN BOOSTER PUMP CORNELL PUMP COMPANY
CORNELL PUMP COMPANY
CUTTER PUMPS
HYDRAULIC SUBS CORNELL PUMP COMPANY
EFFICIENT BY DESIGN
EFFICIENT BY DESIGN
MUNICIPAL
REFRIGERATION
CORNELL PUMP COMPANY
CORNELL PUMP COMPANY
HYDRO TURBINE
IMMERSIBLE
EFFICIENT BY DESIGN
OIL & GAS
CORNELL PUMP COMPANY
MANURE PUMPS
CYCLOSEAL SYSTEM 1994-2014
EFFICIENT BY DESIGN
CYCLOSEAL®
CORNELL PUMP COMPANY
MP SERIES
MINING PUMPS DESIGNED FOR COARSE ABRASIVES
FOR CENTER PIVOT IRRIGATION
STANDARD SPECIFICATIONS • Models Available - 4NNT, 6NNT, 8NNT, etc. • Discharge Sizes Available - 4 to 8 inch • Standard Construction - Cast Iron, Class 30 • Optional Construction - 316SS, CD4MCU, Ductile Iron • Permco hydraulic drive
the ImmersIble motor concept: Immersible motors are designed to be used in dry-pit applications where there is a possibility of flooding. Why take a submersible motor that was designed to run submerged 100% of the time and modify it to run in air 99% (or most of the time) and submerged 1% of the time (in case of a flood)? This seems backwards. The correct approach is to take a TEFC motor that is designed to run in air 100% of the time and adapt it to run submerged 1% of the time (in case of a flood).
FEATURES AND BENEFITS • Various adaptor plates available for hydraulic motor fit • Heavy duty shaft / bearing frame assembly • Heavy duty “wet end” construction • Manufactured in the United States
ImmersIble motor basIc desIgn: The basic design of the immersible pump/motor incorporates a premium efficient, inverter duty, P-Base or C-Face TEBC motor (totally enclosed, blower cooled). The motor, as the name implies, is totally enclosed and cooled by a blower on top of the motor. If the motor becomes submerged, the blower motor fan shuts down without affecting the main motor. While the motor is temporarily submerged, the media cools the motor just like a true submersible. A special conduit box is used to prevent water leakage into the motor. The motor is designed to prevent infiltration of water along the shaft and into the motor by utilizing a triple redundant sealing system, including a patented hydroseal design. The motor-end bell housing incorporates the ‘inverted cup’ principle, which traps an air bubble under the motor as water rises, thus keeping water away from the shaft seal. The shaft is fitted with a hydroseal, which expells water and further reduces the chance of water reaching the shaft seals.
PERFORMANCE CHARACTERISTICS • Premium Hydraulic Efficiencies, 76 to 80% BEP • 3 inch or larger solid handling capability • Total Dynamic Head: 50 to 360 feet • Capacity: 200 to 7000 GPM
TYPICAL MARKETS • General Agriculture, Industrial and Municipal Applications • Rental Applications • Mining Applications • Flood Control Applications • Construction / Dewatering Applications
EFFICIENT BY DESIGN
EFFICIENT BY DESIGN
EFFICIENT BY DESIGN
EFFICIENT BY DESIGN
EFFICIENT BY DESIGN
The Immersible motor can withstand up to 30 feet of submergence depth for a twoweek period. This exceeds the requirements of Immersible motors that is described in the industry standard “Index of Protection” IP67. Competitive designs only allow immersion of the motor for a period of time not exceeding 30 minutes at a submergence level of 3 ‘. Hardly enough time to deal with any kind of flooding emergency!
EFFICIENT BY DESIGN
EFFICIENT BY DESIGN
CORNELL PUMP COMPANY // 16261 SE 130th AVE CLACKAMAS, OR 2013 © ALL RIGHTS RESERVED
CHOPPER MX SERIES CORNELL PUMP COMPANY
CUTTER
HYDRAULIC SUBS HYDRO TURBINE
EDGE™
CORNELL PUMP COMPANY
LÍNEA DE PRODUCTOS MX SERIES DE CORNELL HIGH HEAD MINING PUMPS
BOMBAS AUTOCEBANTES
BOMBAS SUMERGIBLES
BOMBAS PARA REFRIGERACIÓN
BOMBAS PARA EL SECTOR PÚBLICO
TURBINAS
BOMBAS PARA AGRICULTURA Y RIEGO
CORNELL PUMP COMPANY
REDI-PRIME PUMPS BOMBAS DE CEBADO ASISTIDO REDI-PRIME ®
CORNELL PUMP COMPANY
CORNELL
SELF-PRIMING PUMPS STX & STL SERIES
SLURRY PUMPS CORNELL PUMP COMPANY
SLURRY PUMPS CURVES
IMMERSIBLE CORNELL PUMP COMPANY
SUBMERSIBLES EFFICIENT, RELIABLE, TROUBLE-FREE
MANURE CORNELL PUMP COMPANY
WATER TRANSFER HYDRAULIC FRACTURING
MP SERIES CORNELL PUMP COMPANY
V-SERIES PUMPS FOR MEDIUM DUTY APPLICATIONS
THE CORNELL PRODUCT LINE self-priming
submersible
hydro-turbine
agriculture
refrigeration
municipal
food process
industrial
INDUSTRY LEADING EFFICIENCY WITH CYCLOSEAL® SYSTEM
Cycloseal®, Hot Cycloseal®, and Redi-Prime® are Registered Trademarks of Cornell Pump Company. Cornell pumps and products are the subject of one or more of the following U.S. and Foreign patents: 3,207,485; 3,282,226; 3,295,456; 3,301,191; 3,630,637; 3,663,117; 3,743,437; 4,335,886; 4,523,900; 5,489,187; 5,591,001; 6,074,554; 6,036,434; 6,079,958; 6,309,169; 2,320,742; 96/8140; 319,837; 918,534; 1,224,969; 2,232,735; 701,979 and are the subject of pending U.S. and Foreign Patent Applications.
BOMBAS DE CEBADO ASISTIDO
MOTORES INMERSIBLES
TRANSPORTE HIDRÁULICO DE ALIMENTOS
DESAGÜES EN MINERÍA
BOMBAS PARA EL SECTOR INDUSTRIAL
CORPORATIVO
CORNELL PUMP COMPANY
MINE DEWATERING
WHEN RELIABILITY MATTERS
Cycloseal®, and Redi-Prime® are Registered Trademarks of Cornell Pump Company. Cornell pumps and products are the subject of one or more of the following U.S. and Foreign patents: 3,207,485; 3,282,226; 3,295,456; 3,301,191; 3,630,637; 3,663,117; 3,743,437; 4,335,886; 4,523,900; 5,489,187; 5,591,001; 6,074,554; 6,036,434; 6,079,958; 6,309,169; 2,320,742; 96/8140; 319,837; 918,534; 1,224,969; 2,232,735; 701,979 and are the subject of pending U.S. and Foreign Patent Applications. *To visit our REDI_PRIME webpage on your smartphone, scan the QR code below:
Cornell Pump Company 16261 SE 130th Ave
EFFICIENT BY DESIGN
Clackamas,BY OR 97015 EFFICIENT DESIGN Efficient by Design
MX SERIES
P: (503) 653-0330 F: (503) 653-0338
CORNELLPUMP.COM ©2011 CORNELL PUMP COMPANY
MX MINING
CUANDO LA FIABILIDAD ES LO QUE IMPORTA
REDI-PRIME
®
FIVE-YEAR WARRANTY
EFFICIENT BY DESIGN
SELF PRIMING
EFFICIENT BY DESIGN
SLURRY
EFFICIENT BY DESIGN
SUBMERSIBLE
EFFICIENT BY DESIGN
WATER TRANSFER
EFFICIENT BY DESIGN
V SERIES
Cycloseal® and Redi-Prime® are Registered Trademarks of Cornell Pump Company. Cornell pumps and products are the subject of one or more of the following U.S. and foreign patents: 3,207,485; 3,282,226; 3,295,456; 3,301,191; 3,630,637; 3,663,117; 3,743,437; 4,335,886; 4,523,900; 5,489,187; 5,591,001; 6,074,554; 6,036,434; 6,079,958; 6,309,169; 2,320,742; 96/8140; 319,837; 918,534; 1,224,969; 2,232,735; 701,979 and are the subject of pending U.S. and foreign patent applications.
CORNELLPUMP.COM ©2015 CORNELL PUMP COMPANY Cornell Pump Company Clackamas, Oregon, USA P: +1 (503) 653-0330 F: +1 (503) 653-0338
AUTHORIZED CORNELL PUMP DISTRIBUTOR