LED safety Luminaries
Catalogue LED
Sicherheitstechnik GmbH
LED safety luminaire 5 years guarantee on LEDs
SN 6204 LED
INOTEC LED Safety luminaires high light output and variable
SN 8141.1 LED
SN 9024 LED
Technical data Safety lights to DIN VDE 0108 / EN 50172, EN 1838 and IEC 60598-2-22 For systems to DIN VDE 0108 and EN 50171 EMC protection to. DIN EN 55015 Incl. LED illuminant SN 6101 LED
SN 9141.1 LED
SN 6205 LED
5 Years guarantee on LEDs Terminals: 2,5 mm² for through-wiring Enclosure type-wise: Stainless steel, aluminium or sheet steel
LED J/SV With constant current supply SN 6109 LED
SN 8124.1 LED
SN 2518.1 LED
Easily addressable for INOTEC individual lamp monitoring (J/SV) Dimmable in mains operation For the connection to central- or low power supply battery systems. 230V±10% AC / 220V±20%DC Protection class: I or II Permissable temperature: -15°C ... +45°C
SN 6203 LED
SN 9124.1
LED
SN 804D LED LED 24V With 24Vconstant current supply unit incl. INOTEC single luminaire monitoring without address switch For connection to CLS 24 or CPUSB 220/64/24V 24V±20% DC
SN 6114 LED
SN 9104.1 LED
SN 804E LED
Protection class: III Permissable temperature:-15°C ... +40°C LED With 24V current supply unit for connection to CPS 220 system via PSU 24 or J-ET moduls. Permissable temperature: -15°C ... +45°C
Copyright: INOTEC Sicherheitstechnik GmbH, Ense Publications and copies, even partial, only with manufacturers permission. Subject to technical changes. Due to component tolerances measured values may vary!
LED range
Safety luminaire with LED Safety luminaire to EN 1838 For systems to DIN VDE 0108 -100
Dimensions (mm) L=210, H=145,3, D=67 For wall mounting Enclosure: dark grey (similar RAL 7015) or white structured (RAL 9016) Protection category: IP 65
152
145,3
SN 6204
210
4
IBat Em: PMains:
63
LED J/SV 230V with 3 LEDs
LED 24V with 3 LEDs
25mA 9,8VA
150mA
SN 6204 Multi-purpose LED safety luminaire This stylish luminaire is designated to cover applications where ceiling mounting is not possible or appropriate. Corridors and, due to the high IP degree, outdoor usages like the illumination of final exit-doors or emergency stairs, are most common. Mounting height (h) Wall, middle of escape route
2,0m 2,5m 3,0m 3,5m 4,0m 4,5m 5,0m 5,5m 6,0m
2,8 3,0 3,1 3,2 3,1 3,0 2,8 2,6 2,2
Distance to middle of escape route (t) 1,0m 2,0m 3,0m 7,0 2,8 7,2 2,3 6,8 7,4 3,0 7,8 2,6 7,4 8,0 3,1 8,4 2,7 8,1 8,5 3,2 8,7 2,8 8,5 8,7 3,1 9,1 2,8 8,8 9,0 3,0 9,3 2,7 9,0 9,0 2,8 9,3 2,5 9,1 9,0 2,6 9,3 2,0 9,1 8,8 2,1 9,2 1,5 8,9
h t
3
Luminaire distance for 1,25 Lux Measurement plane 2cm above floor level
Safety luminaire with LED Safety luminaire to EN 1838 For systems to DIN VDE 0108 -100
SN 6124
LED 24V with 6 LEDs
6
61
ø81
ø68
Dimensions Cover (mm) ø 81, D=6 Cut out (mm) ø 68, D=61 For recessed wall or stair mounting Enclosure: Hollow wall box Cover: Stainless steel A4 brushed Protection category: IP 20
IBat Em:
SN 6109 65
160
180
Dimensions Cover (mm) L=180, H=65, D=4 Cut out (mm) L=130-150, H=30-60, D=35 For recessed wall or stair mounting Cover: Stainless steel A4 brushed Protection category: IP 20 Connection terminal: 1,5mm²
35
120
4
125mA
IBat Em: PMains:
LED with 4 LEDs
LED 24V with 2 LEDs
13mA 2,8VA
115mA
SN 6109 Top quality stair luminaires The high-grade steel luminaires for staircases. They allow the illumination of stairs in mains healthy and /or emergency situations. The front plate of the SN 6109 can be made to suit your requirements. Contact us for further information.
4
Serien in LED
Safety luminaire with LED Safety luminaire to EN 1838 For systems to DIN VDE 0108 -100
Dimensions (mm) L=200, H=30, D=24 For wall or stair mounting Enclosure: Aluminium with grid front plate or
30
SN 6203 24
200
24
30
200
impact resistant poly-carbonate insert Cover: Stainless steel A4 brushed Protection category: IP 20 Connection terminal: 1,5mm²
70
260
70
70
260
60
SN 6114
70
IBat Em: PMains:
245
5
LED with 5 LEDs
LED 24V with 4 LEDs
16mA 3,5VA
100mA
Dimensions Cover (mm) L=260, H=70, D=7 Cut out (mm) L=245, H=60, D=63 For recessed wall or stair mounting Enclosure: Die cast aluminium with grid front plate or impact resistant polycarbonate insert Protection category: IP 54
IBat Em: PMains:
LED J/SV 230V with 3 LEDs
LED 24V with 3 LEDs
25mA 9,8VA
150mA
Safety luminaire with LED Safety luminaire to EN 1838 For systems to DIN VDE 0108 -100
SN 8141.1
ø 125
Dimensions (mm) ø125, D=52 Dimensions (mm) L=125, H=125, D=52 For ceiling mounting Enclosure: Aluminium white structured (RAL 9016) , silver grey (similar RAL 9022) or special colours Protection category: IP 40 LED J/SV 230V with 4 LEDs
52
IBat Em: PMains:
32mA 11,1VA
q 125
120
Accessories: Mounting adaptor for surface wiring, protection grid
28
52 120
Mounting height Ceiling, middle of escape route
6
2,0m 2,5m 3,0m 3,5m 4,0m 4,5m 5,0m 5,5m 6,0m 6,5m 7,0m 7,5m 8,0m 8,5m 9,0m 9,5m 10,0m
3,3 3,7 4,0 4,0 4,1 4,3 4,3 4,3 4,2 4,0 3,8 3,5 3,1 2,6 1,9 1,1 0,9
8,3 9,2 9,9 10,5 11,0 11,4 11,7 12,0 12,1 12,2 12,1 12,1 11,9 11,7 11,3 10,8 8,9
Luminaire distance for 1,25 Lux Measurement plane 2cm above floor level
LED range
Safety luminaire with LED Safety luminaire to EN 1838 For systems to DIN VDE 0108 -100
SN 9141
2 28
ø 125
ø 68
Dimensions Cover (mm) ø125, D=2 Dimensions Cover (mm) L=125, H=125, D=2 Cut out (mm) ø 68, D=28 For recessed ceiling mounting Enclosure: Aluminium, white structured (RAL 9016), silver grey (similar RAL 9022) or special colours Protection category: IP 20
IBat Em: PMains:
LED J/SV 230V with 4 LEDs
LED 24V with 4 LEDs
32mA 11,1VA
200mA
2 28
q 125
ø 68
Mounting height Ceiling, middle of escape route
7
2,0m 2,5m 3,0m 3,5m 4,0m 4,5m 5,0m 5,5m 6,0m 6,5m 7,0m 7,5m 8,0m 8,5m 9,0m 9,5m 10,0m
3,3 3,7 4,0 4,0 4,1 4,3 4,3 4,3 4,2 4,0 3,8 3,5 3,1 2,6 1,9 1,1 0,9
8,3 9,2 9,9 10,5 11,0 11,4 11,7 12,0 12,1 12,2 12,1 12,1 11,9 11,7 11,3 10,8 8,9
Luminaire distance for 1,25 Lux Measurement plane 2cm above floor level
Safety luminaire with LED
ø85
41
ø76
Dimensions (mm) ø=85, D=41 Dimensions (mm) L=85, H=85, D=41 For ceiling mounting Enclosure: Aluminium white structured (RAL 9016) , silver grey (similar RAL 9022) or special colours Protection category: IP 40 LED 24V with 1 LED
LED 24V with 4 LEDs
80mA
200mA Accessories: Mounting adaptor for surface wiring, protection grid
80
q 85
IBat Em:
q 80
28
41
25
q 85
SN 8124.1-11 SN 8124.1-41
ø85
Safety luminaire to EN 1838 For systems to DIN VDE 0108 -100
80
80
Mounting height Ceiling, middle of escape route
8
2,0m 2,5m 3,0m 3,5m 4,0m 4,5m 5,0m 5,5m 6,0m 6,5m 7,0m 7,5m 8,0m 8,5m 9,0m 9,5m 10,0m
1,9 2,0 1,8 1,6 1,0 1,0 -
5,2 5,5 5,6 5,6 5,4 5,0 -
3,3 3,7 4,0 4,0 4,1 4,3 4,3 4,3 4,2 4,0 3,8 3,5 3,1 2,6 1,9 1,1 0,9
8,3 9,2 9,9 10,5 11,0 11,4 11,7 12,0 12,1 12,2 12,1 12,1 11,9 11,7 11,3 10,8 8,9
Luminaire distance for 1,25 Lux Measurement plane 2cm above floor level
LED range
Safety luminaire with LED
Dimensions Cover (mm) ø=85, D=5 Dimensions Cover (mm) L=85, H=85, D=5 Cut out (mm) ø 68, D=61 For recessed ceiling mounting Cover: Stainless steel A4 brushed or white structured (RAL 9016) or special colours Protection category: IP 20
5
ø85
61
ø68
q 85
IBat Em:
LED 24V with 1 LED
LED 24V with 4 LEDs
80mA
200mA
61
ø68
5
q 85
SN 9124.1-11 SN 9124.1-41
ø85
Safety luminaire to EN 1838 For systems to DIN VDE 0108 -100
Mounting height Ceiling, middle of escape route
9
2,0m 2,5m 3,0m 3,5m 4,0m 4,5m 5,0m 5,5m 6,0m 6,5m 7,0m 7,5m 8,0m 8,5m 9,0m 9,5m 10,0m
1,9 2,0 1,8 1,6 1,0 1,0 -
5,2 5,5 5,6 5,6 5,4 5,0 -
3,3 3,7 4,0 4,0 4,1 4,3 4,3 4,3 4,2 4,0 3,8 3,5 3,1 2,6 1,9 1,1 0,9
8,3 9,2 9,9 10,5 11,0 11,4 11,7 12,0 12,1 12,2 12,1 12,1 11,9 11,7 11,3 10,8 8,9
Luminaire distance for 1,25 Lux Measurement plane 2cm above floor level
Safety luminaire with LED
2 28
ø 68
Dimensions Cover (mm) ø 85, D=2 Dimensions Cover (mm) L=85, H=85, D=2 Cut out (mm) ø 68, D=30 For recessed ceiling mounting Cover: Stainless steel A4 brushed or white structured (RAL 9016) or special colours Protection category: IP 20
q85
LED J/SV 230V with 1 LEDs
LED J/SV 230V with 4 LEDs
LED 24V with 1 LEDs
LED 24V with 4 LEDs
12mA 7,4VA
32mA 11,1VA
80mA
200mA
IBat Em: PMains:
Power supply LED J/SV Dimensions (mm) L=186, H=49, D=35,5 Protection category: IP 20 Protection class: I or II
35,5
49
186
Power supply 24V Dimensions (mm) L=110, H=30, D=16 Protection category: IP 20 Protection class: III No through wiring!
30
110
16
SN 9104.1-11 SN 9104.1-41
ø85
Safety luminaire to EN 1838 For systems to DIN VDE 0108 -100
Mounting height Ceiling, middle of escape route
10
2,0m 2,5m 3,0m 3,5m 4,0m 4,5m 5,0m 5,5m 6,0m 6,5m 7,0m 7,5m 8,0m 8,5m 9,0m 9,5m 10,0m
1,9 2,0 1,8 1,6 1,0 1,0 -
5,2 5,5 5,6 5,6 5,4 5,0 -
3,3 3,7 4,0 4,0 4,1 4,3 4,3 4,3 4,2 4,0 3,8 3,5 3,1 2,6 1,9 1,1 0,9
8,3 9,2 9,9 10,5 11,0 11,4 11,7 12,0 12,1 12,2 12,1 12,1 11,9 11,7 11,3 10,8 8,9
Luminaire distance for 1,25 Lux Measurement plane 2cm above floor level
LED range
Safety luminaire with LED Safety luminaire to EN 1838 For systems to DIN VDE 0108 -100
SN 9024 E LED
Dimensions Cover (mm) ø 45, D=8 Cut out (mm) ø 38, D=30 For recessed ceiling mounting Cover: Stainless steel / aluminium white structured (RAL 9016) or special colours Protection category: IP 20 110 No through wiring! Power supply LED 24V with 1 LEDs IBat Em:
ø45
SN 9024 L LED
80mA
Dimensions Cover (mm) ø 36, D=8 Cut out (mm) ø 33, D=46 Für Leuchteneinbaumontage Cover: Stainless steel / aluminium, anodised aluminium Protection category: IP 20 46
Einbau ø33
8
LED 24V with 1 LEDs IBat Em:
ø36
Luminaire distance for 1,25 Lux Measurement plane 2cm above floor level Mounting height Ceiling, middle of escape route
2,0m 2,5m 3,0m 3,5m 4,0m 4,5m 5,0m 5,5m
2,0 2,0 1,8 1,2 -
5,8 5,8 5,8 5,4 5,2 4,4 3,8 2,0
Less is more! SN 9024 Lowest power consumption can give you maximum safety and approx. 6m luminaire distance.
11
16
8
30
30
Einbau ø38
80mA
Safety and orientation light with LED Safety luminaire to EN 1838 For systems to DIN VDE 0108 -100
SN 6205 LED
50
30
230 183
Dimensions (mm) L=230, H=30, D=50 For wall mounting Enclosure: Aluminium and sheet steel silver grey (similar RAL 9022) Protection category: IP 20 No through wiring! LED 24V with 2 LEDs IBat Em:
115mA
SN 6205 Aesthetically pleasing and safe Elegant luminaire in new LED-lightguide-technology allowing individual, creative, project based safety- and signing concepts.
12
LED range
Safety luminaire with LED Safety luminaire to EN 1838 For systems to DIN VDE 0108 -100
SN 2518.1 136
Dimensions (mm) L=356, H=136, D=79 For wall or ceiling mounting Enclosure: Polycarbonate, high impact resistant Protection category: IP 65 356
79
IBat Em: PMains:
LED J/SV 230V with 4 LEDs
LED 24V with 4 LEDs
32mA 11,1VA
200mA
Mounting height Ceiling, middle of escape route
13
2,0m 2,5m 3,0m 3,5m 4,0m 4,5m 5,0m 5,5m 6,0m 6,5m 7,0m 7,5m 8,0m 8,5m 9,0m 9,5m 10,0m
3,6 4,0 4,4 4,2 4,3 4,5 4,8 5,0 5,0 5,0 4,8 4,6 4,3 4,0 3,6 3,0 2,2
8,4 9,7 10,8 11,6 12,2 12,2 11,9 12,1 12,5 12,9 13,4 13,9 14,2 14,1 14,1 14,0 13,5
8,0 9,5 10,7 11,6 12,3 12,8 13,2 13,6 13,9 14,0 14,2 14,3 14,3 14,2 14,1 13,9 13,7
3,6 4,0 4,4 4,6 4,7 5,0 5,0 5,0 5,0 4,9 4,8 4,7 4,3 4,0 3,6 3,0 2,3
Luminaire distance for 1,25 Lux Measurement plane 2cm above floor level
Safety luminaire with LED Safety luminaire to EN 1838 For systems to DIN VDE 0108 -100
SN 804 D LED
Dimensions (mm) L=120, H=120, D=60 For wall or ceiling mounting Cover: Stainless steel A4 brushed Protection category: IP 65
q 120
60
IBat Em: PMains:
SN 804 D AP LED
LED J/SV 230V with 4 LEDs
LED 24V with 4 LEDs
32mA 11,1VA
200mA
q 120
60
SN 804 ...
Mounting height Ceiling, middle of escape route
14
2,0m 2,5m 3,0m 3,5m 4,0m 4,5m 5,0m 5,5m 6,0m 6,5m 7,0m 7,5m 8,0m 8,5m 9,0m 9,5m 10,0m
3,3 3,7 4,0 4,0 4,1 4,3 4,3 4,3 4,2 4,0 3,8 3,5 3,1 2,6 1,9 1,1 0,9
8,3 9,2 9,9 10,5 11,0 11,4 11,7 12,0 12,1 12,2 12,1 12,1 11,9 11,7 11,3 10,8 8,9
Luminaire distance for 1,25 Lux Measurement plane 2cm above floor level
LED range
Safety luminaire with LED Safety luminaire to EN 1838 For systems to DIN VDE 0108 -100
SN 804 W LED q 120
60
Dimensions (mm) L=120, H=120, D=60 For wall or ceiling mounting Cover: Stainless steel A4 brushed Protection category: IP 65
IBat Em: PMains:
LED J/SV 230V with 4 LEDs
LED 24V with 4 LEDs
32mA 11,1VA
200mA
SN 804 Robust and flexible. The high protection category and the robust high-grade steel housing are the ideal solution for rough industrial environments. Mounting accessories allow the usage on uneven surface maintaining the perpendicular illumination of the escape route.
SN 804 E LED
q 160 q 85
62
Dimensions Cover (mm) L=160, H=160, D=2 Cut out (mm) L=137, H=124, D=60 For recessed ceiling mounting Cover: Stainless steel A4 brushed Protection category: IP 65
IBat Em: PMains:
15
LED J/SV 230V with 4 LEDs
LED 24V with 4 LEDs
32mA 11,1VA
200mA
sgabe 707 082 2007/03 03/2010
INOTEC Sicherheitstechnik GmbH Am Buschgarten 17 D - 59 469 Ense
Tel +49 29 38/97 30-0 Fax +49 29 38/97 30-29
[email protected] www.inotec-licht.de
Sicherheitstechnik GmbH